Skip to contentSkip to conversation

Stop relying on OpenSSL

PATCH In review Theodore Ts'o 2 participants 6 messages May 22, 2017 – May 25, 2017

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 Stop relying on OpenSSL

The OpenSSL dependency was added for one program, fssum, and it needs it only because it needs a md5 implementation. Use Solar Designer's openssl compatible implementation of md5 so we no longer need to depend on OpenSSL.

Since the OpenSSL libraries are not always available, we had to add extra complexity to test to see whether fssum exists. This commit will allow us to drop _require_fssum tests.

The other problem with depending on the OpenSSL libraries is that shared library compatibility situation is terrible; a fssum binary built on a system using libssl1.0.0 is *NOT* run on a system with libssl1.0.2, since the shared libraries are incompatible even across a minor version bump. (Sigh.)

---
 configure.ac         |   1 -
 include/builddefs.in |   1 -
 m4/package_ssldev.m4 |   4 -
 src/Makefile         |  16 ++-
 src/fssum.c          |   6 +-
 src/md5.c            | 291 +++++++++++++++++++++++++++++++++++++++++++++++++++
 src/md5.h            |  45 ++++++++
 7 files changed, 345 insertions(+), 19 deletions(-)
 delete mode 100644 m4/package_ssldev.m4
 create mode 100644 src/md5.c
 create mode 100644 src/md5.h
configure.ac +0 -1
index 5ddaadc2..843ff6b6 100644
@@ -79,7 +79,6 @@ in
 		AC_PACKAGE_WANT_OPEN_BY_HANDLE_AT
 		AC_PACKAGE_WANT_LINUX_PRCTL_H
 		AC_PACKAGE_WANT_LINUX_FS_H
-		AC_PACKAGE_WANT_SSL
 		;;
 esac
 
include/builddefs.in +0 -1
index 952a3e03..38fb9c60 100644
@@ -63,7 +63,6 @@ HAVE_DB = @have_db@
 HAVE_AIO = @have_aio@
 HAVE_FALLOCATE = @have_fallocate@
 HAVE_OPEN_BY_HANDLE_AT = @have_open_by_handle_at@
-HAVE_SSL = @have_ssl@
 HAVE_DMAPI = @have_dmapi@
 HAVE_ATTR_LIST = @have_attr_list@
 HAVE_FIEMAP = @have_fiemap@
m4/package_ssldev.m4 deleted +0 -4
deleted file mode 100644
index 2eae3c50..00000000
@@ -1,4 +0,0 @@
-AC_DEFUN([AC_PACKAGE_WANT_SSL],
-  [ AC_CHECK_HEADERS(openssl/md5.h, [ have_ssl=true ], [ have_ssl=false ])
-    AC_SUBST(have_ssl)
-  ])
src/Makefile +6 -10
index e5042c9b..278f9e55 100644
@@ -61,24 +61,20 @@ ifeq ($(HAVE_AIO), true)
 SUBDIRS += aio-dio-regress
 endif
 
-ifeq ($(HAVE_SSL), true)
-TARGETS += fssum
-LLDLIBS += -lssl -lcrypto
-ifeq ($(PKG_PLATFORM),linux)
-CFLAGS += -D__LINUX__
-endif
-endif
-
 CFILES = $(TARGETS:=.c)
 LDIRT = $(TARGETS)
 
 
-default: depend $(TARGETS) $(SUBDIRS)
+default: depend $(TARGETS) $(SUBDIRS) fssum
 
 depend: .dep
 
 include $(BUILDRULES)
 
+fssum: fssum.c md5.c
+	@echo "    [CC]    $@"
+	$(Q)$(LTLINK) fssum.c md5.c -o $@ $(CFLAGS) $(LDFLAGS) $(LDLIBS)
+
 $(TARGETS): $(LIBTEST)
 	@echo "    [CC]    $@"
 	$(Q)$(LTLINK) [email protected] -o $@ $(CFLAGS) $(LDFLAGS) $(LDLIBS) $(LIBTEST)
@@ -87,7 +83,7 @@ LINKTEST = $(LTLINK) [email protected] -o $@ $(CFLAGS) $(LDFLAGS)
 
 install: default $(addsuffix -install,$(SUBDIRS))
 	$(INSTALL) -m 755 -d $(PKG_LIB_DIR)/src
-	$(LTINSTALL) -m 755 $(TARGETS) $(PKG_LIB_DIR)/src
+	$(LTINSTALL) -m 755 $(TARGETS) fssum $(PKG_LIB_DIR)/src
 	$(LTINSTALL) -m 755 fill2attr fill2fs fill2fs_check scaleread.sh $(PKG_LIB_DIR)/src
 	$(LTINSTALL) -m 644 dumpfile $(PKG_LIB_DIR)/src
 
src/fssum.c +3 -3
index c26d32b9..88e75621 100644
@@ -15,7 +15,7 @@
  * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
  * Boston, MA 021110-1307, USA.
  */
-#ifdef __LINUX__
+#ifdef __linux__
 #define _BSD_SOURCE
 #define _LARGEFILE64_SOURCE
 #ifndef _GNU_SOURCE
@@ -34,7 +34,7 @@
 #ifdef __SOLARIS__
 #include <sys/mkdev.h>
 #endif
-#include <openssl/md5.h>
+#include "md5.h"
 #include <netinet/in.h>
 #include <inttypes.h>
 #include <assert.h>
@@ -42,7 +42,7 @@
 #define CS_SIZE 16
 #define CHUNKS	128
 
-#ifdef __LINUX__
+#ifdef __linux__
 #ifndef SEEK_DATA
 #define SEEK_DATA 3
 #define SEEK_HOLE 4
src/md5.c new file +291 -0

291 lines not on this page · raw message

src/md5.h new file +45 -0

45 lines not on this page · raw message

Signature · 1 line
2.11.0.rc0.7.gbe5a750
#1 lore raw

PATCH 2/2 Drop _require_fssum

Now that fssum is built unconditionally, we no longer need _require_fssum.

---
 common/rc       | 6 ------
 tests/btrfs/007 | 1 -
 tests/btrfs/016 | 1 -
 tests/btrfs/030 | 1 -
 tests/btrfs/038 | 1 -
 tests/btrfs/039 | 1 -
 tests/btrfs/040 | 1 -
 tests/btrfs/043 | 1 -
 tests/btrfs/044 | 1 -
 tests/btrfs/045 | 1 -
 tests/btrfs/046 | 1 -
 tests/btrfs/050 | 1 -
 tests/btrfs/051 | 1 -
 tests/btrfs/053 | 1 -
 tests/btrfs/077 | 1 -
 tests/btrfs/083 | 1 -
 tests/btrfs/084 | 1 -
 tests/btrfs/087 | 1 -
 tests/btrfs/092 | 1 -
 tests/btrfs/127 | 1 -
 tests/btrfs/128 | 1 -
 tests/btrfs/129 | 1 -
 tests/btrfs/133 | 1 -
 tests/btrfs/134 | 1 -
 tests/btrfs/135 | 1 -
 25 files changed, 30 deletions(-)
common/rc +0 -6
index 65886886..796f60e7 100644
@@ -3164,12 +3164,6 @@ _require_ugid_map()
 	fi
 }
 
-_require_fssum()
-{
-	FSSUM_PROG=$here/src/fssum
-	[ -x $FSSUM_PROG ] || _notrun "fssum not built"
-}
-
 _require_cloner()
 {
 	CLONER_PROG=$here/src/cloner
tests/btrfs/007 +0 -1
index 57f9a79f..d74108e1 100755
@@ -50,7 +50,6 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
 _supported_fs btrfs
 _supported_os Linux
 _require_scratch
-_require_fssum
 _require_seek_data_hole
 
 rm -f $seqres.full
tests/btrfs/016 +0 -1
index de4f1a84..dbd59409 100755
@@ -51,7 +51,6 @@ _supported_fs btrfs
 _supported_os Linux
 _require_test
 _require_scratch
-_require_fssum
 
 _scratch_mkfs > /dev/null 2>&1
 
tests/btrfs/030 +0 -1
index 6b67de08..3ea7b89d 100755
@@ -53,7 +53,6 @@ _cleanup()
 _supported_fs btrfs
 _supported_os Linux
 _require_scratch
-_require_fssum
 
 rm -f $seqres.full
 
tests/btrfs/038 +0 -1
index e46b7eb1..f5099e7a 100755
@@ -49,7 +49,6 @@ _cleanup()
 _supported_fs btrfs
 _supported_os Linux
 _require_scratch
-_require_fssum
 
 rm -f $seqres.full
 
tests/btrfs/039 +0 -1
index 25380dc1..e8239a86 100755
@@ -52,7 +52,6 @@ _cleanup()
 _supported_fs btrfs
 _supported_os Linux
 _require_scratch
-_require_fssum
 
 rm -f $seqres.full
 
tests/btrfs/040 +0 -1
index 13584b1e..ffce51af 100755
@@ -52,7 +52,6 @@ _cleanup()
 _supported_fs btrfs
 _supported_os Linux
 _require_scratch
-_require_fssum
 
 rm -f $seqres.full
 
tests/btrfs/043 +0 -1
index 7bf83036..33c3e098 100755
@@ -48,7 +48,6 @@ _cleanup()
 _supported_fs btrfs
 _supported_os Linux
 _require_scratch
-_require_fssum
 
 rm -f $seqres.full
 
tests/btrfs/044 +0 -1
index 8668d767..62223c53 100755
@@ -53,7 +53,6 @@ _cleanup()
 _supported_fs btrfs
 _supported_os Linux
 _require_scratch
-_require_fssum
 
 rm -f $seqres.full
 
tests/btrfs/045 +0 -1
index 9fad27d5..027d9184 100755
@@ -69,7 +69,6 @@ _cleanup()
 _supported_fs btrfs
 _supported_os Linux
 _require_scratch
-_require_fssum
 
 rm -f $seqres.full
 
tests/btrfs/046 +0 -1
index 284fa955..de7a7df4 100755
@@ -53,7 +53,6 @@ _supported_fs btrfs
 _supported_os Linux
 _require_test
 _require_scratch
-_require_fssum
 
 rm -f $seqres.full
 rm -fr $send_files_dir
tests/btrfs/050 +0 -1
index 62e2cfc4..10daa7a4 100755
@@ -53,7 +53,6 @@ _supported_fs btrfs
 _supported_os Linux
 _require_test
 _require_scratch
-_require_fssum
 
 send_files_dir=$TEST_DIR/btrfs-test-$seq
 
tests/btrfs/051 +0 -1
index 0a874120..679a4963 100755
@@ -50,7 +50,6 @@ _supported_fs btrfs
 _supported_os Linux
 _require_test
 _require_scratch
-_require_fssum
 
 send_files_dir=$TEST_DIR/btrfs-test-$seq
 
tests/btrfs/053 +0 -1
index 1f9bffd2..239f6c92 100755
@@ -52,7 +52,6 @@ _supported_fs btrfs
 _supported_os Linux
 _require_test
 _require_scratch
-_require_fssum
 _require_attrs
 
 # max(16384, PAGE_SIZE) is the default leaf/node size on btrfs-progs v3.12+.
tests/btrfs/077 +0 -1
index 8d6541aa..b2e6c2f8 100755
@@ -57,7 +57,6 @@ _cleanup()
 _supported_fs btrfs
 _supported_os Linux
 _require_scratch
-_require_fssum
 
 send_files_dir=$TEST_DIR/btrfs-test-$seq
 
tests/btrfs/083 +0 -1
index 80c8cc39..775b12bc 100755
@@ -51,7 +51,6 @@ _cleanup()
 _supported_fs btrfs
 _supported_os Linux
 _require_scratch
-_require_fssum
 
 send_files_dir=$TEST_DIR/btrfs-test-$seq
 
tests/btrfs/084 +0 -1
index 0dc94068..93f893be 100755
@@ -50,7 +50,6 @@ _cleanup()
 _supported_fs btrfs
 _supported_os Linux
 _require_scratch
-_require_fssum
 
 send_files_dir=$TEST_DIR/btrfs-test-$seq
 
tests/btrfs/087 +0 -1
index 15b050db..dfa9c36b 100755
@@ -56,7 +56,6 @@ _cleanup()
 _supported_fs btrfs
 _supported_os Linux
 _require_scratch
-_require_fssum
 
 send_files_dir=$TEST_DIR/btrfs-test-$seq
 
tests/btrfs/092 +0 -1
index 5f9c5d60..100cb63e 100755
@@ -55,7 +55,6 @@ _cleanup()
 _supported_fs btrfs
 _supported_os Linux
 _require_scratch
-_require_fssum
 
 send_files_dir=$TEST_DIR/btrfs-test-$seq
 
tests/btrfs/127 +0 -1
index d1e873ac..e4b27d7c 100755
@@ -48,7 +48,6 @@ _supported_fs btrfs
 _supported_os Linux
 _require_test
 _require_scratch
-_require_fssum
 
 send_files_dir=$TEST_DIR/btrfs-test-$seq
 
tests/btrfs/128 +0 -1
index b5563a7a..5470e0ed 100755
@@ -47,7 +47,6 @@ _supported_fs btrfs
 _supported_os Linux
 _require_test
 _require_scratch
-_require_fssum
 
 send_files_dir=$TEST_DIR/btrfs-test-$seq
 
tests/btrfs/129 +0 -1
index e1fb7b50..e8b6317b 100755
@@ -48,7 +48,6 @@ _supported_fs btrfs
 _supported_os Linux
 _require_test
 _require_scratch
-_require_fssum
 
 send_files_dir=$TEST_DIR/btrfs-test-$seq
 
tests/btrfs/133 +0 -1
index 34b6c131..858d90cb 100755
@@ -48,7 +48,6 @@ _supported_fs btrfs
 _supported_os Linux
 _require_test
 _require_scratch
-_require_fssum
 
 send_files_dir=$TEST_DIR/btrfs-test-$seq
 
tests/btrfs/134 +0 -1
index f6520088..e41a71fd 100755
@@ -48,7 +48,6 @@ _supported_fs btrfs
 _supported_os Linux
 _require_test
 _require_scratch
-_require_fssum
 
 send_files_dir=$TEST_DIR/btrfs-test-$seq
 
tests/btrfs/135 +0 -1
index 2199d6ae..99aefd35 100755
@@ -49,7 +49,6 @@ _supported_fs btrfs
 _supported_os Linux
 _require_test
 _require_scratch
-_require_fssum
 
 send_files_dir=$TEST_DIR/btrfs-test-$seq
 
Signature · 1 line
2.11.0.rc0.7.gbe5a750
#2 lore raw

Re: [PATCH 2/2] Drop _require_fssum

Quoted 37 lines · Theodore Ts'o

Now that fssum is built unconditionally, we no longer need _require_fssum.

---
 common/rc       | 6 ------
 tests/btrfs/007 | 1 -
 tests/btrfs/016 | 1 -
 tests/btrfs/030 | 1 -
 tests/btrfs/038 | 1 -
 tests/btrfs/039 | 1 -
 tests/btrfs/040 | 1 -
 tests/btrfs/043 | 1 -
 tests/btrfs/044 | 1 -
 tests/btrfs/045 | 1 -
 tests/btrfs/046 | 1 -
 tests/btrfs/050 | 1 -
 tests/btrfs/051 | 1 -
 tests/btrfs/053 | 1 -
 tests/btrfs/077 | 1 -
 tests/btrfs/083 | 1 -
 tests/btrfs/084 | 1 -
 tests/btrfs/087 | 1 -
 tests/btrfs/092 | 1 -
 tests/btrfs/127 | 1 -
 tests/btrfs/128 | 1 -
 tests/btrfs/129 | 1 -
 tests/btrfs/133 | 1 -
 tests/btrfs/134 | 1 -
 tests/btrfs/135 | 1 -
 25 files changed, 30 deletions(-)
common/rc +0 -0
index 65886886..796f60e7 100644

common/rc _require_ugid_map() · line 3172

Quoted 9 lines
common/rc +0 -6
@@ -3164,12 +3164,6 @@ _require_ugid_map()
 	fi
 }
 
-_require_fssum()
-{
-	FSSUM_PROG=$here/src/fssum
-	[ -x $FSSUM_PROG ] || _notrun "fssum not built"
-}
-

I think this is still needed. It has FSSUM_PROG definition (otherwise all these btrfs tests failed due to unable to find $FSSUM_PROG), and we do check for existence of binary files in src, even the file is built unconditionally on make. They can be removed accidently or one may forget to build a newly added test.

Thanks,
Eryu

#3 lore raw

Re: [PATCH 2/2] Drop _require_fssum

Quoted 5 lines · Eryu Guan

I think this is still needed. It has FSSUM_PROG definition (otherwise all these btrfs tests failed due to unable to find $FSSUM_PROG), and we do check for existence of binary files in src, even the file is built unconditionally on make. They can be removed accidently or one may forget to build a newly added test.

Good point; I had missed that.

- Ted

#4 lore raw

PATCH 1/1 Stop relying on OpenSSL

In reply to Eryu Guan

The OpenSSL dependency was added for one program, fssum, and it needs it only because it needs a md5 implementation. Use Solar Designer's openssl compatible implementation of md5 so we no longer need to depend on OpenSSL.

Since the OpenSSL libraries are not always available, we had to add extra complexity to test to see whether fssum exists.

The other problem with depending on the OpenSSL libraries is that shared library compatibility situation is terrible; a fssum binary built on a system using libssl1.0.0 is *NOT* run on a system with libssl1.0.2, since the shared libraries are incompatible even across a minor version bump. (Sigh.)

---
 README               |   2 +-
 configure.ac         |   1 -
 include/builddefs.in |   1 -
 m4/package_ssldev.m4 |   4 -
 src/Makefile         |  18 ++--
 src/fssum.c          |   6 +-
 src/md5.c            | 291 +++++++++++++++++++++++++++++++++++++++++++++++++++
 src/md5.h            |  45 ++++++++
 8 files changed, 347 insertions(+), 21 deletions(-)
 delete mode 100644 m4/package_ssldev.m4
 create mode 100644 src/md5.c
 create mode 100644 src/md5.h
README +1 -1
index b6ea1670..faa274d2 100644
@@ -15,7 +15,7 @@ Building Linux:
 		gawk gcc indent libtool lvm2 make psmisc quota sed \
 		xfsdump xfsprogs \
 		libacl-devel libattr-devel libaio-devel libuuid-devel \
-		openssl-devel xfsprogs-devel btrfs-progs-devel
+		xfsprogs-devel btrfs-progs-devel
 		(Older distributions may require xfsprogs-qa-devel as well.)
 		(Note that for RHEL and CentOS, you may need the EPEL repo.)
 	- run make
configure.ac +0 -1
index 5ddaadc2..843ff6b6 100644
@@ -79,7 +79,6 @@ in
 		AC_PACKAGE_WANT_OPEN_BY_HANDLE_AT
 		AC_PACKAGE_WANT_LINUX_PRCTL_H
 		AC_PACKAGE_WANT_LINUX_FS_H
-		AC_PACKAGE_WANT_SSL
 		;;
 esac
 
include/builddefs.in +0 -1
index 952a3e03..38fb9c60 100644
@@ -63,7 +63,6 @@ HAVE_DB = @have_db@
 HAVE_AIO = @have_aio@
 HAVE_FALLOCATE = @have_fallocate@
 HAVE_OPEN_BY_HANDLE_AT = @have_open_by_handle_at@
-HAVE_SSL = @have_ssl@
 HAVE_DMAPI = @have_dmapi@
 HAVE_ATTR_LIST = @have_attr_list@
 HAVE_FIEMAP = @have_fiemap@
m4/package_ssldev.m4 deleted +0 -4
deleted file mode 100644
index 2eae3c50..00000000
@@ -1,4 +0,0 @@
-AC_DEFUN([AC_PACKAGE_WANT_SSL],
-  [ AC_CHECK_HEADERS(openssl/md5.h, [ have_ssl=true ], [ have_ssl=false ])
-    AC_SUBST(have_ssl)
-  ])
src/Makefile +7 -11
index 47246622..4ec01975 100644
@@ -63,24 +63,20 @@ SUBDIRS += aio-dio-regress
 LLDLIBS += -laio
 endif
 
-ifeq ($(HAVE_SSL), true)
-TARGETS += fssum
-LLDLIBS += -lssl -lcrypto
-ifeq ($(PKG_PLATFORM),linux)
-CFLAGS += -D__LINUX__
-endif
-endif
-
 CFILES = $(TARGETS:=.c)
-LDIRT = $(TARGETS)
+LDIRT = $(TARGETS) fssum
 
 
-default: depend $(TARGETS) $(SUBDIRS)
+default: depend $(LDIRT) $(SUBDIRS)
 
 depend: .dep
 
 include $(BUILDRULES)
 
+fssum: fssum.c md5.c
+	@echo "    [CC]    $@"
+	$(Q)$(LTLINK) fssum.c md5.c -o $@ $(CFLAGS) $(LDFLAGS) $(LDLIBS)
+
 $(TARGETS): $(LIBTEST)
 	@echo "    [CC]    $@"
 	$(Q)$(LTLINK) [email protected] -o $@ $(CFLAGS) $(LDFLAGS) $(LDLIBS) $(LIBTEST)
@@ -89,7 +85,7 @@ LINKTEST = $(LTLINK) [email protected] -o $@ $(CFLAGS) $(LDFLAGS)
 
 install: default $(addsuffix -install,$(SUBDIRS))
 	$(INSTALL) -m 755 -d $(PKG_LIB_DIR)/src
-	$(LTINSTALL) -m 755 $(TARGETS) $(PKG_LIB_DIR)/src
+	$(LTINSTALL) -m 755 $(LDIRT) $(PKG_LIB_DIR)/src
 	$(LTINSTALL) -m 755 fill2attr fill2fs fill2fs_check scaleread.sh $(PKG_LIB_DIR)/src
 	$(LTINSTALL) -m 644 dumpfile $(PKG_LIB_DIR)/src
 
src/fssum.c +3 -3
index c26d32b9..88e75621 100644
@@ -15,7 +15,7 @@
  * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
  * Boston, MA 021110-1307, USA.
  */
-#ifdef __LINUX__
+#ifdef __linux__
 #define _BSD_SOURCE
 #define _LARGEFILE64_SOURCE
 #ifndef _GNU_SOURCE
@@ -34,7 +34,7 @@
 #ifdef __SOLARIS__
 #include <sys/mkdev.h>
 #endif
-#include <openssl/md5.h>
+#include "md5.h"
 #include <netinet/in.h>
 #include <inttypes.h>
 #include <assert.h>
@@ -42,7 +42,7 @@
 #define CS_SIZE 16
 #define CHUNKS	128
 
-#ifdef __LINUX__
+#ifdef __linux__
 #ifndef SEEK_DATA
 #define SEEK_DATA 3
 #define SEEK_HOLE 4
src/md5.c new file +291 -0

291 lines not on this page · raw message

src/md5.h new file +45 -0

45 lines not on this page · raw message

Signature · 1 line
2.11.0.rc0.7.gbe5a750
#5 lore raw
In reply to Theodore Ts'o
Quoted 9 lines · Theodore Ts'o

The OpenSSL dependency was added for one program, fssum, and it needs it only because it needs a md5 implementation. Use Solar Designer's openssl compatible implementation of md5 so we no longer need to depend on OpenSSL.

Since the OpenSSL libraries are not always available, we had to add extra complexity to test to see whether fssum exists. This commit will allow us to drop _require_fssum tests.

Quoted 7 lines

The other problem with depending on the OpenSSL libraries is that shared library compatibility situation is terrible; a fssum binary built on a system using libssl1.0.0 is *NOT* run on a system with libssl1.0.2, since the shared libraries are incompatible even across a minor version bump. (Sigh.)

README can be updated too to remove openssl-devel as a prerequisite package.

Quoted 59 lines
---
 configure.ac         |   1 -
 include/builddefs.in |   1 -
 m4/package_ssldev.m4 |   4 -
 src/Makefile         |  16 ++-
 src/fssum.c          |   6 +-
 src/md5.c            | 291 +++++++++++++++++++++++++++++++++++++++++++++++++++
 src/md5.h            |  45 ++++++++
 7 files changed, 345 insertions(+), 19 deletions(-)
 delete mode 100644 m4/package_ssldev.m4
 create mode 100644 src/md5.c
 create mode 100644 src/md5.h
configure.ac +0 -1
index 5ddaadc2..843ff6b6 100644
@@ -79,7 +79,6 @@ in
 		AC_PACKAGE_WANT_OPEN_BY_HANDLE_AT
 		AC_PACKAGE_WANT_LINUX_PRCTL_H
 		AC_PACKAGE_WANT_LINUX_FS_H
-		AC_PACKAGE_WANT_SSL
 		;;
 esac
 
include/builddefs.in +0 -1
index 952a3e03..38fb9c60 100644
@@ -63,7 +63,6 @@ HAVE_DB = @have_db@
 HAVE_AIO = @have_aio@
 HAVE_FALLOCATE = @have_fallocate@
 HAVE_OPEN_BY_HANDLE_AT = @have_open_by_handle_at@
-HAVE_SSL = @have_ssl@
 HAVE_DMAPI = @have_dmapi@
 HAVE_ATTR_LIST = @have_attr_list@
 HAVE_FIEMAP = @have_fiemap@
m4/package_ssldev.m4 deleted +0 -4
deleted file mode 100644
index 2eae3c50..00000000
@@ -1,4 +0,0 @@
-AC_DEFUN([AC_PACKAGE_WANT_SSL],
-  [ AC_CHECK_HEADERS(openssl/md5.h, [ have_ssl=true ], [ have_ssl=false ])
-    AC_SUBST(have_ssl)
-  ])
src/Makefile +0 -4
index e5042c9b..278f9e55 100644
@@ -61,24 +61,20 @@ ifeq ($(HAVE_AIO), true)
 LLDLIBS += -laio
 endif
 
-ifeq ($(HAVE_SSL), true)
-TARGETS += fssum
-LLDLIBS += -lssl -lcrypto
-ifeq ($(PKG_PLATFORM),linux)

src/Makefile ifeq ($(HAVE_AIO), true) · line 68

Quoted 10 lines
src/Makefile +1 -5
-CFLAGS += -D__LINUX__
-endif
-endif
-
 CFILES = $(TARGETS:=.c)
 LDIRT = $(TARGETS)
 
 
-default: depend $(TARGETS) $(SUBDIRS)
+default: depend $(TARGETS) $(SUBDIRS) fssum

One problem with fssum not being in $(TARGETS) is that fssum won't be removed on make clean.

Thanks,
Eryu

Quoted 407 lines
src/Makefile +5 -1
 depend: .dep
 
 include $(BUILDRULES)
 
+fssum: fssum.c md5.c
+	@echo "    [CC]    $@"
+	$(Q)$(LTLINK) fssum.c md5.c -o $@ $(CFLAGS) $(LDFLAGS) $(LDLIBS)
+
 $(TARGETS): $(LIBTEST)
 	@echo "    [CC]    $@"
 	$(Q)$(LTLINK) [email protected] -o $@ $(CFLAGS) $(LDFLAGS) $(LDLIBS) $(LIBTEST)
@@ -87,7 +83,7 @@ LINKTEST = $(LTLINK) [email protected] -o $@ $(CFLAGS) $(LDFLAGS)
 
 install: default $(addsuffix -install,$(SUBDIRS))
 	$(INSTALL) -m 755 -d $(PKG_LIB_DIR)/src
-	$(LTINSTALL) -m 755 $(TARGETS) $(PKG_LIB_DIR)/src
+	$(LTINSTALL) -m 755 $(TARGETS) fssum $(PKG_LIB_DIR)/src
 	$(LTINSTALL) -m 755 fill2attr fill2fs fill2fs_check scaleread.sh $(PKG_LIB_DIR)/src
 	$(LTINSTALL) -m 644 dumpfile $(PKG_LIB_DIR)/src
 
src/fssum.c +3 -3
index c26d32b9..88e75621 100644
@@ -15,7 +15,7 @@
  * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
  * Boston, MA 021110-1307, USA.
  */
-#ifdef __LINUX__
+#ifdef __linux__
 #define _BSD_SOURCE
 #define _LARGEFILE64_SOURCE
 #ifndef _GNU_SOURCE
@@ -34,7 +34,7 @@
 #ifdef __SOLARIS__
 #include <sys/mkdev.h>
 #endif
-#include <openssl/md5.h>
+#include "md5.h"
 #include <netinet/in.h>
 #include <inttypes.h>
 #include <assert.h>
@@ -42,7 +42,7 @@
 #define CS_SIZE 16
 #define CHUNKS	128
 
-#ifdef __LINUX__
+#ifdef __linux__
 #ifndef SEEK_DATA
 #define SEEK_DATA 3
 #define SEEK_HOLE 4
src/md5.c new file +291 -0
new file mode 100644
index 00000000..b235e17a
@@ -0,0 +1,291 @@
+/*
+ * This is an OpenSSL-compatible implementation of the RSA Data Security, Inc.
+ * MD5 Message-Digest Algorithm (RFC 1321).
+ *
+ * Homepage:
+ * http://openwall.info/wiki/people/solar/software/public-domain-source-code/md5
+ *
+ * Author:
+ * Alexander Peslyak, better known as Solar Designer <solar at openwall.com>
+ *
+ * This software was written by Alexander Peslyak in 2001.  No copyright is
+ * claimed, and the software is hereby placed in the public domain.
+ * In case this attempt to disclaim copyright and place the software in the
+ * public domain is deemed null and void, then the software is
+ * Copyright (c) 2001 Alexander Peslyak and it is hereby released to the
+ * general public under the following terms:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted.
+ *
+ * There's ABSOLUTELY NO WARRANTY, express or implied.
+ *
+ * (This is a heavily cut-down "BSD license".)
+ *
+ * This differs from Colin Plumb's older public domain implementation in that
+ * no exactly 32-bit integer data type is required (any 32-bit or wider
+ * unsigned integer data type will do), there's no compile-time endianness
+ * configuration, and the function prototypes match OpenSSL's.  No code from
+ * Colin Plumb's implementation has been reused; this comment merely compares
+ * the properties of the two independent implementations.
+ *
+ * The primary goals of this implementation are portability and ease of use.
+ * It is meant to be fast, but not as fast as possible.  Some known
+ * optimizations are not included to reduce source code size and avoid
+ * compile-time configuration.
+ */
+
+#ifndef HAVE_OPENSSL
+
+#include <string.h>
+
+#include "md5.h"
+
+/*
+ * The basic MD5 functions.
+ *
+ * F and G are optimized compared to their RFC 1321 definitions for
+ * architectures that lack an AND-NOT instruction, just like in Colin Plumb's
+ * implementation.
+ */
+#define F(x, y, z)			((z) ^ ((x) & ((y) ^ (z))))
+#define G(x, y, z)			((y) ^ ((z) & ((x) ^ (y))))
+#define H(x, y, z)			(((x) ^ (y)) ^ (z))
+#define H2(x, y, z)			((x) ^ ((y) ^ (z)))
+#define I(x, y, z)			((y) ^ ((x) | ~(z)))
+
+/*
+ * The MD5 transformation for all four rounds.
+ */
+#define STEP(f, a, b, c, d, x, t, s) \
+	(a) += f((b), (c), (d)) + (x) + (t); \
+	(a) = (((a) << (s)) | (((a) & 0xffffffff) >> (32 - (s)))); \
+	(a) += (b);
+
+/*
+ * SET reads 4 input bytes in little-endian byte order and stores them in a
+ * properly aligned word in host byte order.
+ *
+ * The check for little-endian architectures that tolerate unaligned memory
+ * accesses is just an optimization.  Nothing will break if it fails to detect
+ * a suitable architecture.
+ *
+ * Unfortunately, this optimization may be a C strict aliasing rules violation
+ * if the caller's data buffer has effective type that cannot be aliased by
+ * MD5_u32plus.  In practice, this problem may occur if these MD5 routines are
+ * inlined into a calling function, or with future and dangerously advanced
+ * link-time optimizations.  For the time being, keeping these MD5 routines in
+ * their own translation unit avoids the problem.
+ */
+#if defined(__i386__) || defined(__x86_64__) || defined(__vax__)
+#define SET(n) \
+	(*(MD5_u32plus *)&ptr[(n) * 4])
+#define GET(n) \
+	SET(n)
+#else
+#define SET(n) \
+	(ctx->block[(n)] = \
+	(MD5_u32plus)ptr[(n) * 4] | \
+	((MD5_u32plus)ptr[(n) * 4 + 1] << 8) | \
+	((MD5_u32plus)ptr[(n) * 4 + 2] << 16) | \
+	((MD5_u32plus)ptr[(n) * 4 + 3] << 24))
+#define GET(n) \
+	(ctx->block[(n)])
+#endif
+
+/*
+ * This processes one or more 64-byte data blocks, but does NOT update the bit
+ * counters.  There are no alignment requirements.
+ */
+static const void *body(MD5_CTX *ctx, const void *data, unsigned long size)
+{
+	const unsigned char *ptr;
+	MD5_u32plus a, b, c, d;
+	MD5_u32plus saved_a, saved_b, saved_c, saved_d;
+
+	ptr = (const unsigned char *)data;
+
+	a = ctx->a;
+	b = ctx->b;
+	c = ctx->c;
+	d = ctx->d;
+
+	do {
+		saved_a = a;
+		saved_b = b;
+		saved_c = c;
+		saved_d = d;
+
+/* Round 1 */
+		STEP(F, a, b, c, d, SET(0), 0xd76aa478, 7)
+		STEP(F, d, a, b, c, SET(1), 0xe8c7b756, 12)
+		STEP(F, c, d, a, b, SET(2), 0x242070db, 17)
+		STEP(F, b, c, d, a, SET(3), 0xc1bdceee, 22)
+		STEP(F, a, b, c, d, SET(4), 0xf57c0faf, 7)
+		STEP(F, d, a, b, c, SET(5), 0x4787c62a, 12)
+		STEP(F, c, d, a, b, SET(6), 0xa8304613, 17)
+		STEP(F, b, c, d, a, SET(7), 0xfd469501, 22)
+		STEP(F, a, b, c, d, SET(8), 0x698098d8, 7)
+		STEP(F, d, a, b, c, SET(9), 0x8b44f7af, 12)
+		STEP(F, c, d, a, b, SET(10), 0xffff5bb1, 17)
+		STEP(F, b, c, d, a, SET(11), 0x895cd7be, 22)
+		STEP(F, a, b, c, d, SET(12), 0x6b901122, 7)
+		STEP(F, d, a, b, c, SET(13), 0xfd987193, 12)
+		STEP(F, c, d, a, b, SET(14), 0xa679438e, 17)
+		STEP(F, b, c, d, a, SET(15), 0x49b40821, 22)
+
+/* Round 2 */
+		STEP(G, a, b, c, d, GET(1), 0xf61e2562, 5)
+		STEP(G, d, a, b, c, GET(6), 0xc040b340, 9)
+		STEP(G, c, d, a, b, GET(11), 0x265e5a51, 14)
+		STEP(G, b, c, d, a, GET(0), 0xe9b6c7aa, 20)
+		STEP(G, a, b, c, d, GET(5), 0xd62f105d, 5)
+		STEP(G, d, a, b, c, GET(10), 0x02441453, 9)
+		STEP(G, c, d, a, b, GET(15), 0xd8a1e681, 14)
+		STEP(G, b, c, d, a, GET(4), 0xe7d3fbc8, 20)
+		STEP(G, a, b, c, d, GET(9), 0x21e1cde6, 5)
+		STEP(G, d, a, b, c, GET(14), 0xc33707d6, 9)
+		STEP(G, c, d, a, b, GET(3), 0xf4d50d87, 14)
+		STEP(G, b, c, d, a, GET(8), 0x455a14ed, 20)
+		STEP(G, a, b, c, d, GET(13), 0xa9e3e905, 5)
+		STEP(G, d, a, b, c, GET(2), 0xfcefa3f8, 9)
+		STEP(G, c, d, a, b, GET(7), 0x676f02d9, 14)
+		STEP(G, b, c, d, a, GET(12), 0x8d2a4c8a, 20)
+
+/* Round 3 */
+		STEP(H, a, b, c, d, GET(5), 0xfffa3942, 4)
+		STEP(H2, d, a, b, c, GET(8), 0x8771f681, 11)
+		STEP(H, c, d, a, b, GET(11), 0x6d9d6122, 16)
+		STEP(H2, b, c, d, a, GET(14), 0xfde5380c, 23)
+		STEP(H, a, b, c, d, GET(1), 0xa4beea44, 4)
+		STEP(H2, d, a, b, c, GET(4), 0x4bdecfa9, 11)
+		STEP(H, c, d, a, b, GET(7), 0xf6bb4b60, 16)
+		STEP(H2, b, c, d, a, GET(10), 0xbebfbc70, 23)
+		STEP(H, a, b, c, d, GET(13), 0x289b7ec6, 4)
+		STEP(H2, d, a, b, c, GET(0), 0xeaa127fa, 11)
+		STEP(H, c, d, a, b, GET(3), 0xd4ef3085, 16)
+		STEP(H2, b, c, d, a, GET(6), 0x04881d05, 23)
+		STEP(H, a, b, c, d, GET(9), 0xd9d4d039, 4)
+		STEP(H2, d, a, b, c, GET(12), 0xe6db99e5, 11)
+		STEP(H, c, d, a, b, GET(15), 0x1fa27cf8, 16)
+		STEP(H2, b, c, d, a, GET(2), 0xc4ac5665, 23)
+
+/* Round 4 */
+		STEP(I, a, b, c, d, GET(0), 0xf4292244, 6)
+		STEP(I, d, a, b, c, GET(7), 0x432aff97, 10)
+		STEP(I, c, d, a, b, GET(14), 0xab9423a7, 15)
+		STEP(I, b, c, d, a, GET(5), 0xfc93a039, 21)
+		STEP(I, a, b, c, d, GET(12), 0x655b59c3, 6)
+		STEP(I, d, a, b, c, GET(3), 0x8f0ccc92, 10)
+		STEP(I, c, d, a, b, GET(10), 0xffeff47d, 15)
+		STEP(I, b, c, d, a, GET(1), 0x85845dd1, 21)
+		STEP(I, a, b, c, d, GET(8), 0x6fa87e4f, 6)
+		STEP(I, d, a, b, c, GET(15), 0xfe2ce6e0, 10)
+		STEP(I, c, d, a, b, GET(6), 0xa3014314, 15)
+		STEP(I, b, c, d, a, GET(13), 0x4e0811a1, 21)
+		STEP(I, a, b, c, d, GET(4), 0xf7537e82, 6)
+		STEP(I, d, a, b, c, GET(11), 0xbd3af235, 10)
+		STEP(I, c, d, a, b, GET(2), 0x2ad7d2bb, 15)
+		STEP(I, b, c, d, a, GET(9), 0xeb86d391, 21)
+
+		a += saved_a;
+		b += saved_b;
+		c += saved_c;
+		d += saved_d;
+
+		ptr += 64;
+	} while (size -= 64);
+
+	ctx->a = a;
+	ctx->b = b;
+	ctx->c = c;
+	ctx->d = d;
+
+	return ptr;
+}
+
+void MD5_Init(MD5_CTX *ctx)
+{
+	ctx->a = 0x67452301;
+	ctx->b = 0xefcdab89;
+	ctx->c = 0x98badcfe;
+	ctx->d = 0x10325476;
+
+	ctx->lo = 0;
+	ctx->hi = 0;
+}
+
+void MD5_Update(MD5_CTX *ctx, const void *data, unsigned long size)
+{
+	MD5_u32plus saved_lo;
+	unsigned long used, available;
+
+	saved_lo = ctx->lo;
+	if ((ctx->lo = (saved_lo + size) & 0x1fffffff) < saved_lo)
+		ctx->hi++;
+	ctx->hi += size >> 29;
+
+	used = saved_lo & 0x3f;
+
+	if (used) {
+		available = 64 - used;
+
+		if (size < available) {
+			memcpy(&ctx->buffer[used], data, size);
+			return;
+		}
+
+		memcpy(&ctx->buffer[used], data, available);
+		data = (const unsigned char *)data + available;
+		size -= available;
+		body(ctx, ctx->buffer, 64);
+	}
+
+	if (size >= 64) {
+		data = body(ctx, data, size & ~(unsigned long)0x3f);
+		size &= 0x3f;
+	}
+
+	memcpy(ctx->buffer, data, size);
+}
+
+#define OUT(dst, src) \
+	(dst)[0] = (unsigned char)(src); \
+	(dst)[1] = (unsigned char)((src) >> 8); \
+	(dst)[2] = (unsigned char)((src) >> 16); \
+	(dst)[3] = (unsigned char)((src) >> 24);
+
+void MD5_Final(unsigned char *result, MD5_CTX *ctx)
+{
+	unsigned long used, available;
+
+	used = ctx->lo & 0x3f;
+
+	ctx->buffer[used++] = 0x80;
+
+	available = 64 - used;
+
+	if (available < 8) {
+		memset(&ctx->buffer[used], 0, available);
+		body(ctx, ctx->buffer, 64);
+		used = 0;
+		available = 64;
+	}
+
+	memset(&ctx->buffer[used], 0, available - 8);
+
+	ctx->lo <<= 3;
+	OUT(&ctx->buffer[56], ctx->lo)
+	OUT(&ctx->buffer[60], ctx->hi)
+
+	body(ctx, ctx->buffer, 64);
+
+	OUT(&result[0], ctx->a)
+	OUT(&result[4], ctx->b)
+	OUT(&result[8], ctx->c)
+	OUT(&result[12], ctx->d)
+
+	memset(ctx, 0, sizeof(*ctx));
+}
+
+#endif
src/md5.h new file +45 -0
new file mode 100644
index 00000000..2da44bf3
@@ -0,0 +1,45 @@
+/*
+ * This is an OpenSSL-compatible implementation of the RSA Data Security, Inc.
+ * MD5 Message-Digest Algorithm (RFC 1321).
+ *
+ * Homepage:
+ * http://openwall.info/wiki/people/solar/software/public-domain-source-code/md5
+ *
+ * Author:
+ * Alexander Peslyak, better known as Solar Designer <solar at openwall.com>
+ *
+ * This software was written by Alexander Peslyak in 2001.  No copyright is
+ * claimed, and the software is hereby placed in the public domain.
+ * In case this attempt to disclaim copyright and place the software in the
+ * public domain is deemed null and void, then the software is
+ * Copyright (c) 2001 Alexander Peslyak and it is hereby released to the
+ * general public under the following terms:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted.
+ *
+ * There's ABSOLUTELY NO WARRANTY, express or implied.
+ *
+ * See md5.c for more information.
+ */
+
+#ifdef HAVE_OPENSSL
+#include <openssl/md5.h>
+#elif !defined(_MD5_H)
+#define _MD5_H
+
+/* Any 32-bit or wider unsigned integer data type will do */
+typedef unsigned int MD5_u32plus;
+
+typedef struct {
+	MD5_u32plus lo, hi;
+	MD5_u32plus a, b, c, d;
+	unsigned char buffer[64];
+	MD5_u32plus block[16];
+} MD5_CTX;
+
+extern void MD5_Init(MD5_CTX *ctx);
+extern void MD5_Update(MD5_CTX *ctx, const void *data, unsigned long size);
+extern void MD5_Final(unsigned char *result, MD5_CTX *ctx);
+
+#endif
Signature · 6 lines
2.11.0.rc0.7.gbe5a750

--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html