Stop relying on OpenSSL
PATCH 1/2 Stop relying on OpenSSL
The OpenSSL dependency was added for one program, fssum, and it needs it only because it needs a md5 implementation. Use Solar Designer's openssl compatible implementation of md5 so we no longer need to depend on OpenSSL.
Since the OpenSSL libraries are not always available, we had to add extra complexity to test to see whether fssum exists. This commit will allow us to drop _require_fssum tests.
The other problem with depending on the OpenSSL libraries is that shared library compatibility situation is terrible; a fssum binary built on a system using libssl1.0.0 is *NOT* run on a system with libssl1.0.2, since the shared libraries are incompatible even across a minor version bump. (Sigh.)
--- configure.ac | 1 - include/builddefs.in | 1 - m4/package_ssldev.m4 | 4 - src/Makefile | 16 ++- src/fssum.c | 6 +- src/md5.c | 291 +++++++++++++++++++++++++++++++++++++++++++++++++++ src/md5.h | 45 ++++++++ 7 files changed, 345 insertions(+), 19 deletions(-) delete mode 100644 m4/package_ssldev.m4 create mode 100644 src/md5.c create mode 100644 src/md5.h
configure.ac +0 -1
@@ -79,7 +79,6 @@ in AC_PACKAGE_WANT_OPEN_BY_HANDLE_AT AC_PACKAGE_WANT_LINUX_PRCTL_H AC_PACKAGE_WANT_LINUX_FS_H - AC_PACKAGE_WANT_SSL ;; esac
include/builddefs.in +0 -1
@@ -63,7 +63,6 @@ HAVE_DB = @have_db@ HAVE_AIO = @have_aio@ HAVE_FALLOCATE = @have_fallocate@ HAVE_OPEN_BY_HANDLE_AT = @have_open_by_handle_at@ -HAVE_SSL = @have_ssl@ HAVE_DMAPI = @have_dmapi@ HAVE_ATTR_LIST = @have_attr_list@ HAVE_FIEMAP = @have_fiemap@
m4/package_ssldev.m4 deleted +0 -4
@@ -1,4 +0,0 @@ -AC_DEFUN([AC_PACKAGE_WANT_SSL], - [ AC_CHECK_HEADERS(openssl/md5.h, [ have_ssl=true ], [ have_ssl=false ]) - AC_SUBST(have_ssl) - ])
src/Makefile +6 -10
@@ -61,24 +61,20 @@ ifeq ($(HAVE_AIO), true) SUBDIRS += aio-dio-regress endif -ifeq ($(HAVE_SSL), true) -TARGETS += fssum -LLDLIBS += -lssl -lcrypto -ifeq ($(PKG_PLATFORM),linux) -CFLAGS += -D__LINUX__ -endif -endif - CFILES = $(TARGETS:=.c) LDIRT = $(TARGETS) -default: depend $(TARGETS) $(SUBDIRS) +default: depend $(TARGETS) $(SUBDIRS) fssum depend: .dep include $(BUILDRULES) +fssum: fssum.c md5.c + @echo " [CC] $@" + $(Q)$(LTLINK) fssum.c md5.c -o $@ $(CFLAGS) $(LDFLAGS) $(LDLIBS) + $(TARGETS): $(LIBTEST) @echo " [CC] $@" $(Q)$(LTLINK) [email protected] -o $@ $(CFLAGS) $(LDFLAGS) $(LDLIBS) $(LIBTEST)
@@ -87,7 +83,7 @@ LINKTEST = $(LTLINK) [email protected] -o $@ $(CFLAGS) $(LDFLAGS) install: default $(addsuffix -install,$(SUBDIRS)) $(INSTALL) -m 755 -d $(PKG_LIB_DIR)/src - $(LTINSTALL) -m 755 $(TARGETS) $(PKG_LIB_DIR)/src + $(LTINSTALL) -m 755 $(TARGETS) fssum $(PKG_LIB_DIR)/src $(LTINSTALL) -m 755 fill2attr fill2fs fill2fs_check scaleread.sh $(PKG_LIB_DIR)/src $(LTINSTALL) -m 644 dumpfile $(PKG_LIB_DIR)/src
src/fssum.c +3 -3
@@ -15,7 +15,7 @@* Free Software Foundation, Inc., 59 Temple Place - Suite 330, * Boston, MA 021110-1307, USA. */ -#ifdef __LINUX__ +#ifdef __linux__#define _BSD_SOURCE#define _LARGEFILE64_SOURCE#ifndef _GNU_SOURCE
@@ -34,7 +34,7 @@#ifdef __SOLARIS__#include <sys/mkdev.h> #endif -#include <openssl/md5.h> +#include "md5.h" #include <netinet/in.h> #include <inttypes.h> #include <assert.h>
@@ -42,7 +42,7 @@#define CS_SIZE 16#define CHUNKS 128 -#ifdef __LINUX__ +#ifdef __linux__#ifndef SEEK_DATA #define SEEK_DATA 3#define SEEK_HOLE 4
src/md5.c new file +291 -0
291 lines not on this page · raw message
src/md5.h new file +45 -0
45 lines not on this page · raw message
Signature · 1 line
2.11.0.rc0.7.gbe5a750
PATCH 2/2 Drop _require_fssum
Now that fssum is built unconditionally, we no longer need _require_fssum.
--- common/rc | 6 ------ tests/btrfs/007 | 1 - tests/btrfs/016 | 1 - tests/btrfs/030 | 1 - tests/btrfs/038 | 1 - tests/btrfs/039 | 1 - tests/btrfs/040 | 1 - tests/btrfs/043 | 1 - tests/btrfs/044 | 1 - tests/btrfs/045 | 1 - tests/btrfs/046 | 1 - tests/btrfs/050 | 1 - tests/btrfs/051 | 1 - tests/btrfs/053 | 1 - tests/btrfs/077 | 1 - tests/btrfs/083 | 1 - tests/btrfs/084 | 1 - tests/btrfs/087 | 1 - tests/btrfs/092 | 1 - tests/btrfs/127 | 1 - tests/btrfs/128 | 1 - tests/btrfs/129 | 1 - tests/btrfs/133 | 1 - tests/btrfs/134 | 1 - tests/btrfs/135 | 1 - 25 files changed, 30 deletions(-)
common/rc +0 -6
@@ -3164,12 +3164,6 @@ _require_ugid_map() fi } -_require_fssum() -{ - FSSUM_PROG=$here/src/fssum - [ -x $FSSUM_PROG ] || _notrun "fssum not built" -} - _require_cloner() { CLONER_PROG=$here/src/cloner
tests/btrfs/007 +0 -1
@@ -50,7 +50,6 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 _supported_fs btrfs _supported_os Linux _require_scratch -_require_fssum _require_seek_data_hole rm -f $seqres.full
tests/btrfs/016 +0 -1
@@ -51,7 +51,6 @@ _supported_fs btrfs _supported_os Linux _require_test _require_scratch -_require_fssum _scratch_mkfs > /dev/null 2>&1
tests/btrfs/030 +0 -1
@@ -53,7 +53,6 @@ _cleanup() _supported_fs btrfs _supported_os Linux _require_scratch -_require_fssum rm -f $seqres.full
tests/btrfs/038 +0 -1
@@ -49,7 +49,6 @@ _cleanup() _supported_fs btrfs _supported_os Linux _require_scratch -_require_fssum rm -f $seqres.full
tests/btrfs/039 +0 -1
@@ -52,7 +52,6 @@ _cleanup() _supported_fs btrfs _supported_os Linux _require_scratch -_require_fssum rm -f $seqres.full
tests/btrfs/040 +0 -1
@@ -52,7 +52,6 @@ _cleanup() _supported_fs btrfs _supported_os Linux _require_scratch -_require_fssum rm -f $seqres.full
tests/btrfs/043 +0 -1
@@ -48,7 +48,6 @@ _cleanup() _supported_fs btrfs _supported_os Linux _require_scratch -_require_fssum rm -f $seqres.full
tests/btrfs/044 +0 -1
@@ -53,7 +53,6 @@ _cleanup() _supported_fs btrfs _supported_os Linux _require_scratch -_require_fssum rm -f $seqres.full
tests/btrfs/045 +0 -1
@@ -69,7 +69,6 @@ _cleanup() _supported_fs btrfs _supported_os Linux _require_scratch -_require_fssum rm -f $seqres.full
tests/btrfs/046 +0 -1
@@ -53,7 +53,6 @@ _supported_fs btrfs _supported_os Linux _require_test _require_scratch -_require_fssum rm -f $seqres.full rm -fr $send_files_dir
tests/btrfs/050 +0 -1
@@ -53,7 +53,6 @@ _supported_fs btrfs _supported_os Linux _require_test _require_scratch -_require_fssum send_files_dir=$TEST_DIR/btrfs-test-$seq
tests/btrfs/051 +0 -1
@@ -50,7 +50,6 @@ _supported_fs btrfs _supported_os Linux _require_test _require_scratch -_require_fssum send_files_dir=$TEST_DIR/btrfs-test-$seq
tests/btrfs/053 +0 -1
@@ -52,7 +52,6 @@ _supported_fs btrfs _supported_os Linux _require_test _require_scratch -_require_fssum _require_attrs # max(16384, PAGE_SIZE) is the default leaf/node size on btrfs-progs v3.12+.
tests/btrfs/077 +0 -1
@@ -57,7 +57,6 @@ _cleanup() _supported_fs btrfs _supported_os Linux _require_scratch -_require_fssum send_files_dir=$TEST_DIR/btrfs-test-$seq
tests/btrfs/083 +0 -1
@@ -51,7 +51,6 @@ _cleanup() _supported_fs btrfs _supported_os Linux _require_scratch -_require_fssum send_files_dir=$TEST_DIR/btrfs-test-$seq
tests/btrfs/084 +0 -1
@@ -50,7 +50,6 @@ _cleanup() _supported_fs btrfs _supported_os Linux _require_scratch -_require_fssum send_files_dir=$TEST_DIR/btrfs-test-$seq
tests/btrfs/087 +0 -1
@@ -56,7 +56,6 @@ _cleanup() _supported_fs btrfs _supported_os Linux _require_scratch -_require_fssum send_files_dir=$TEST_DIR/btrfs-test-$seq
tests/btrfs/092 +0 -1
@@ -55,7 +55,6 @@ _cleanup() _supported_fs btrfs _supported_os Linux _require_scratch -_require_fssum send_files_dir=$TEST_DIR/btrfs-test-$seq
tests/btrfs/127 +0 -1
@@ -48,7 +48,6 @@ _supported_fs btrfs _supported_os Linux _require_test _require_scratch -_require_fssum send_files_dir=$TEST_DIR/btrfs-test-$seq
tests/btrfs/128 +0 -1
@@ -47,7 +47,6 @@ _supported_fs btrfs _supported_os Linux _require_test _require_scratch -_require_fssum send_files_dir=$TEST_DIR/btrfs-test-$seq
tests/btrfs/129 +0 -1
@@ -48,7 +48,6 @@ _supported_fs btrfs _supported_os Linux _require_test _require_scratch -_require_fssum send_files_dir=$TEST_DIR/btrfs-test-$seq
tests/btrfs/133 +0 -1
@@ -48,7 +48,6 @@ _supported_fs btrfs _supported_os Linux _require_test _require_scratch -_require_fssum send_files_dir=$TEST_DIR/btrfs-test-$seq
tests/btrfs/134 +0 -1
@@ -48,7 +48,6 @@ _supported_fs btrfs _supported_os Linux _require_test _require_scratch -_require_fssum send_files_dir=$TEST_DIR/btrfs-test-$seq
tests/btrfs/135 +0 -1
@@ -49,7 +49,6 @@ _supported_fs btrfs _supported_os Linux _require_test _require_scratch -_require_fssum send_files_dir=$TEST_DIR/btrfs-test-$seq
Signature · 1 line
2.11.0.rc0.7.gbe5a750
Re: [PATCH 2/2] Drop _require_fssum
Quoted 37 lines · Theodore Ts'o
Now that fssum is built unconditionally, we no longer need
_require_fssum.Signed-off-by Theodore Ts'o <[email protected]>--- common/rc | 6 ------ tests/btrfs/007 | 1 - tests/btrfs/016 | 1 - tests/btrfs/030 | 1 - tests/btrfs/038 | 1 - tests/btrfs/039 | 1 - tests/btrfs/040 | 1 - tests/btrfs/043 | 1 - tests/btrfs/044 | 1 - tests/btrfs/045 | 1 - tests/btrfs/046 | 1 - tests/btrfs/050 | 1 - tests/btrfs/051 | 1 - tests/btrfs/053 | 1 - tests/btrfs/077 | 1 - tests/btrfs/083 | 1 - tests/btrfs/084 | 1 - tests/btrfs/087 | 1 - tests/btrfs/092 | 1 - tests/btrfs/127 | 1 - tests/btrfs/128 | 1 - tests/btrfs/129 | 1 - tests/btrfs/133 | 1 - tests/btrfs/134 | 1 - tests/btrfs/135 | 1 - 25 files changed, 30 deletions(-)common/rc +0
-0
common/rc _require_ugid_map() · line 3172
Quoted 9 lines
common/rc +0
-6@@ -3164,12 +3164,6 @@ _require_ugid_map() fi } -_require_fssum() -{ - FSSUM_PROG=$here/src/fssum - [ -x $FSSUM_PROG ] || _notrun "fssum not built" -} -
I think this is still needed. It has FSSUM_PROG definition (otherwise all these btrfs tests failed due to unable to find $FSSUM_PROG), and we do check for existence of binary files in src, even the file is built unconditionally on make. They can be removed accidently or one may forget to build a newly added test.
Thanks,
Eryu
Re: [PATCH 2/2] Drop _require_fssum
Quoted 5 lines · Eryu Guan
I think this is still needed. It has
FSSUM_PROGdefinition (otherwise all these btrfs tests failed due to unable to find $FSSUM_PROG), and we do check for existence of binary files in src, even the file is built unconditionally on make. They can be removed accidently or one may forget to build a newly added test.
Good point; I had missed that.
- Ted
PATCH 1/1 Stop relying on OpenSSL
In reply to Eryu GuanThe OpenSSL dependency was added for one program, fssum, and it needs it only because it needs a md5 implementation. Use Solar Designer's openssl compatible implementation of md5 so we no longer need to depend on OpenSSL.
Since the OpenSSL libraries are not always available, we had to add extra complexity to test to see whether fssum exists.
The other problem with depending on the OpenSSL libraries is that shared library compatibility situation is terrible; a fssum binary built on a system using libssl1.0.0 is *NOT* run on a system with libssl1.0.2, since the shared libraries are incompatible even across a minor version bump. (Sigh.)
--- README | 2 +- configure.ac | 1 - include/builddefs.in | 1 - m4/package_ssldev.m4 | 4 - src/Makefile | 18 ++-- src/fssum.c | 6 +- src/md5.c | 291 +++++++++++++++++++++++++++++++++++++++++++++++++++ src/md5.h | 45 ++++++++ 8 files changed, 347 insertions(+), 21 deletions(-) delete mode 100644 m4/package_ssldev.m4 create mode 100644 src/md5.c create mode 100644 src/md5.h
README +1 -1
@@ -15,7 +15,7 @@ Building Linux: gawk gcc indent libtool lvm2 make psmisc quota sed \ xfsdump xfsprogs \ libacl-devel libattr-devel libaio-devel libuuid-devel \ - openssl-devel xfsprogs-devel btrfs-progs-devel + xfsprogs-devel btrfs-progs-devel (Older distributions may require xfsprogs-qa-devel as well.) (Note that for RHEL and CentOS, you may need the EPEL repo.) - run make
configure.ac +0 -1
@@ -79,7 +79,6 @@ in AC_PACKAGE_WANT_OPEN_BY_HANDLE_AT AC_PACKAGE_WANT_LINUX_PRCTL_H AC_PACKAGE_WANT_LINUX_FS_H - AC_PACKAGE_WANT_SSL ;; esac
include/builddefs.in +0 -1
@@ -63,7 +63,6 @@ HAVE_DB = @have_db@ HAVE_AIO = @have_aio@ HAVE_FALLOCATE = @have_fallocate@ HAVE_OPEN_BY_HANDLE_AT = @have_open_by_handle_at@ -HAVE_SSL = @have_ssl@ HAVE_DMAPI = @have_dmapi@ HAVE_ATTR_LIST = @have_attr_list@ HAVE_FIEMAP = @have_fiemap@
m4/package_ssldev.m4 deleted +0 -4
@@ -1,4 +0,0 @@ -AC_DEFUN([AC_PACKAGE_WANT_SSL], - [ AC_CHECK_HEADERS(openssl/md5.h, [ have_ssl=true ], [ have_ssl=false ]) - AC_SUBST(have_ssl) - ])
src/Makefile +7 -11
@@ -63,24 +63,20 @@ SUBDIRS += aio-dio-regress LLDLIBS += -laio endif -ifeq ($(HAVE_SSL), true) -TARGETS += fssum -LLDLIBS += -lssl -lcrypto -ifeq ($(PKG_PLATFORM),linux) -CFLAGS += -D__LINUX__ -endif -endif - CFILES = $(TARGETS:=.c) -LDIRT = $(TARGETS) +LDIRT = $(TARGETS) fssum -default: depend $(TARGETS) $(SUBDIRS) +default: depend $(LDIRT) $(SUBDIRS) depend: .dep include $(BUILDRULES) +fssum: fssum.c md5.c + @echo " [CC] $@" + $(Q)$(LTLINK) fssum.c md5.c -o $@ $(CFLAGS) $(LDFLAGS) $(LDLIBS) + $(TARGETS): $(LIBTEST) @echo " [CC] $@" $(Q)$(LTLINK) [email protected] -o $@ $(CFLAGS) $(LDFLAGS) $(LDLIBS) $(LIBTEST)
@@ -89,7 +85,7 @@ LINKTEST = $(LTLINK) [email protected] -o $@ $(CFLAGS) $(LDFLAGS) install: default $(addsuffix -install,$(SUBDIRS)) $(INSTALL) -m 755 -d $(PKG_LIB_DIR)/src - $(LTINSTALL) -m 755 $(TARGETS) $(PKG_LIB_DIR)/src + $(LTINSTALL) -m 755 $(LDIRT) $(PKG_LIB_DIR)/src $(LTINSTALL) -m 755 fill2attr fill2fs fill2fs_check scaleread.sh $(PKG_LIB_DIR)/src $(LTINSTALL) -m 644 dumpfile $(PKG_LIB_DIR)/src
src/fssum.c +3 -3
@@ -15,7 +15,7 @@* Free Software Foundation, Inc., 59 Temple Place - Suite 330, * Boston, MA 021110-1307, USA. */ -#ifdef __LINUX__ +#ifdef __linux__#define _BSD_SOURCE#define _LARGEFILE64_SOURCE#ifndef _GNU_SOURCE
@@ -34,7 +34,7 @@#ifdef __SOLARIS__#include <sys/mkdev.h> #endif -#include <openssl/md5.h> +#include "md5.h" #include <netinet/in.h> #include <inttypes.h> #include <assert.h>
@@ -42,7 +42,7 @@#define CS_SIZE 16#define CHUNKS 128 -#ifdef __LINUX__ +#ifdef __linux__#ifndef SEEK_DATA #define SEEK_DATA 3#define SEEK_HOLE 4
src/md5.c new file +291 -0
291 lines not on this page · raw message
src/md5.h new file +45 -0
45 lines not on this page · raw message
Signature · 1 line
2.11.0.rc0.7.gbe5a750
Quoted 9 lines · Theodore Ts'o
The OpenSSL dependency was added for one program, fssum, and it needs it only because it needs a md5 implementation. Use Solar Designer's openssl compatible implementation of md5 so we no longer need to depend on OpenSSL.
Since the OpenSSL libraries are not always available, we had to add extra complexity to test to see whether fssum exists. This commit will allow us to drop
_require_fssumtests.
Quoted 7 lines
The other problem with depending on the OpenSSL libraries is that shared library compatibility situation is terrible; a fssum binary built on a system using libssl1.0.0 is *NOT* run on a system with libssl1.0.2, since the shared libraries are incompatible even across a minor version bump. (Sigh.)
Signed-off-by Theodore Ts'o <[email protected]>
README can be updated too to remove openssl-devel as a prerequisite package.
Quoted 59 lines
--- configure.ac | 1 - include/builddefs.in | 1 - m4/package_ssldev.m4 | 4 - src/Makefile | 16 ++- src/fssum.c | 6 +- src/md5.c | 291 +++++++++++++++++++++++++++++++++++++++++++++++++++ src/md5.h | 45 ++++++++ 7 files changed, 345 insertions(+), 19 deletions(-) delete mode 100644 m4/package_ssldev.m4 create mode 100644 src/md5.c create mode 100644 src/md5.hconfigure.ac +0
-1@@ -79,7 +79,6 @@ in AC_PACKAGE_WANT_OPEN_BY_HANDLE_AT AC_PACKAGE_WANT_LINUX_PRCTL_H AC_PACKAGE_WANT_LINUX_FS_H - AC_PACKAGE_WANT_SSL ;; esacinclude/builddefs.in +0
-1@@ -63,7 +63,6 @@ HAVE_DB = @have_db@ HAVE_AIO = @have_aio@ HAVE_FALLOCATE = @have_fallocate@ HAVE_OPEN_BY_HANDLE_AT = @have_open_by_handle_at@ -HAVE_SSL = @have_ssl@ HAVE_DMAPI = @have_dmapi@ HAVE_ATTR_LIST = @have_attr_list@ HAVE_FIEMAP = @have_fiemap@m4/package_ssldev.m4 deleted +0
-4@@ -1,4 +0,0 @@ -AC_DEFUN([AC_PACKAGE_WANT_SSL], - [ AC_CHECK_HEADERS(openssl/md5.h, [ have_ssl=true ], [ have_ssl=false ]) - AC_SUBST(have_ssl) - ])src/Makefile +0
-4@@ -61,24 +61,20 @@ ifeq ($(HAVE_AIO), true) LLDLIBS += -laio endif -ifeq ($(HAVE_SSL), true) -TARGETS += fssum -LLDLIBS += -lssl -lcrypto -ifeq ($(PKG_PLATFORM),linux)
src/Makefile ifeq ($(HAVE_AIO), true) · line 68
Quoted 10 lines
src/Makefile +1
-5-CFLAGS += -D__LINUX__ -endif -endif - CFILES = $(TARGETS:=.c) LDIRT = $(TARGETS) -default: depend $(TARGETS) $(SUBDIRS) +default: depend $(TARGETS) $(SUBDIRS) fssum
One problem with fssum not being in $(TARGETS) is that fssum won't be removed on make clean.
Thanks,
Eryu
Quoted 407 lines
src/Makefile +5
-1depend: .dep include $(BUILDRULES) +fssum: fssum.c md5.c + @echo " [CC] $@" + $(Q)$(LTLINK) fssum.c md5.c -o $@ $(CFLAGS) $(LDFLAGS) $(LDLIBS) + $(TARGETS): $(LIBTEST) @echo " [CC] $@" $(Q)$(LTLINK) [email protected] -o $@ $(CFLAGS) $(LDFLAGS) $(LDLIBS) $(LIBTEST)@@ -87,7 +83,7 @@ LINKTEST = $(LTLINK) [email protected] -o $@ $(CFLAGS) $(LDFLAGS) install: default $(addsuffix -install,$(SUBDIRS)) $(INSTALL) -m 755 -d $(PKG_LIB_DIR)/src - $(LTINSTALL) -m 755 $(TARGETS) $(PKG_LIB_DIR)/src + $(LTINSTALL) -m 755 $(TARGETS) fssum $(PKG_LIB_DIR)/src $(LTINSTALL) -m 755 fill2attr fill2fs fill2fs_check scaleread.sh $(PKG_LIB_DIR)/src $(LTINSTALL) -m 644 dumpfile $(PKG_LIB_DIR)/srcsrc/fssum.c +3
-3@@ -15,7 +15,7 @@* Free Software Foundation, Inc., 59 Temple Place - Suite 330, * Boston, MA 021110-1307, USA. */ -#ifdef __LINUX__ +#ifdef __linux__#define _BSD_SOURCE#define _LARGEFILE64_SOURCE#ifndef _GNU_SOURCE@@ -34,7 +34,7 @@#ifdef __SOLARIS__#include <sys/mkdev.h> #endif -#include <openssl/md5.h> +#include "md5.h" #include <netinet/in.h> #include <inttypes.h> #include <assert.h> @@ -42,7 +42,7 @@#define CS_SIZE 16#define CHUNKS 128 -#ifdef __LINUX__ +#ifdef __linux__#ifndef SEEK_DATA #define SEEK_DATA 3#define SEEK_HOLE 4src/md5.c new file +291
-0@@ -0,0 +1,291 @@ +/* +* This is an OpenSSL-compatible implementation of the RSA Data Security, Inc. +* MD5 Message-Digest Algorithm (RFC 1321). +* +* Homepage: +* http://openwall.info/wiki/people/solar/software/public-domain-source-code/md5 +* +* Author: +* Alexander Peslyak, better known as Solar Designer <solar at openwall.com> +* +* This software was written by Alexander Peslyak in 2001. No copyright is +* claimed, and the software is hereby placed in the public domain. +* In case this attempt to disclaim copyright and place the software in the +* public domain is deemed null and void, then the software is +* Copyright (c) 2001 Alexander Peslyak and it is hereby released to the +* general public under the following terms: +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted. +* +* There's ABSOLUTELY NO WARRANTY, express or implied. +* +* (This is a heavily cut-down "BSD license".) +* +* This differs from Colin Plumb's older public domain implementation in that +* no exactly 32-bit integer data type is required (any 32-bit or wider +* unsigned integer data type will do), there's no compile-time endianness +* configuration, and the function prototypes match OpenSSL's. No code from +* Colin Plumb's implementation has been reused; this comment merely compares +* the properties of the two independent implementations. +* +* The primary goals of this implementation are portability and ease of use. +* It is meant to be fast, but not as fast as possible. Some known +* optimizations are not included to reduce source code size and avoid +* compile-time configuration. +*/ + +#ifndef HAVE_OPENSSL + +#include <string.h> + +#include "md5.h" + +/* +* The basic MD5 functions. +* +* F and G are optimized compared to their RFC 1321 definitions for +* architectures that lack an AND-NOT instruction, just like in Colin Plumb's +* implementation. +*/ +#define F (x, y, z) ((z) ^ ((x) & ((y) ^ (z)))) +#define G (x, y, z) ((y) ^ ((z) & ((x) ^ (y)))) +#define H (x, y, z) (((x) ^ (y)) ^ (z)) +#define H2 (x, y, z) ((x) ^ ((y) ^ (z))) +#define I (x, y, z) ((y) ^ ((x) | ~(z))) + +/* +* The MD5 transformation for all four rounds. +*/ +#define STEP (f, a, b, c, d, x, t, s) \ + (a) += f((b), (c), (d)) + (x) + (t); \ + (a) = (((a) << (s)) | (((a) & 0xffffffff) >> (32 - (s)))); \ + (a) += (b); + +/* +* SET reads 4 input bytes in little-endian byte order and stores them in a +* properly aligned word in host byte order. +* +* The check for little-endian architectures that tolerate unaligned memory +* accesses is just an optimization. Nothing will break if it fails to detect +* a suitable architecture. +* +* Unfortunately, this optimization may be a C strict aliasing rules violation +* if the caller's data buffer has effective type that cannot be aliased by +* MD5_u32plus. In practice, this problem may occur if these MD5 routines are +* inlined into a calling function, or with future and dangerously advanced +* link-time optimizations. For the time being, keeping these MD5 routines in +* their own translation unit avoids the problem. +*/ +#if defined(__i386__) || defined(__x86_64__) || defined(__vax__) +#define SET (n) \ + (*(MD5_u32plus *)&ptr[(n) * 4]) +#define GET (n) \ + SET(n) +#else +#define SET (n) \ + (ctx->block[(n)] = \ + (MD5_u32plus)ptr[(n) * 4] | \ + ((MD5_u32plus)ptr[(n) * 4 + 1] << 8) | \ + ((MD5_u32plus)ptr[(n) * 4 + 2] << 16) | \ + ((MD5_u32plus)ptr[(n) * 4 + 3] << 24)) +#define GET (n) \ + (ctx->block[(n)]) +#endif + +/* +* This processes one or more 64-byte data blocks, but does NOT update the bit +* counters. There are no alignment requirements. +*/ +static const void *body (MD5_CTX *ctx,const void *data,unsigned long size) +{ +const unsigned char *ptr; +MD5_u32plus a, b, c, d; +MD5_u32plus saved_a, saved_b, saved_c, saved_d; + + ptr = (const unsigned char *)data; + + a = ctx->a; + b = ctx->b; + c = ctx->c; + d = ctx->d; + +do { + saved_a = a; + saved_b = b; + saved_c = c; + saved_d = d; + +/* Round 1 */ + STEP(F, a, b, c, d, SET(0), 0xd76aa478, 7) + STEP(F, d, a, b, c, SET(1), 0xe8c7b756, 12) + STEP(F, c, d, a, b, SET(2), 0x242070db, 17) + STEP(F, b, c, d, a, SET(3), 0xc1bdceee, 22) + STEP(F, a, b, c, d, SET(4), 0xf57c0faf, 7) + STEP(F, d, a, b, c, SET(5), 0x4787c62a, 12) + STEP(F, c, d, a, b, SET(6), 0xa8304613, 17) + STEP(F, b, c, d, a, SET(7), 0xfd469501, 22) + STEP(F, a, b, c, d, SET(8), 0x698098d8, 7) + STEP(F, d, a, b, c, SET(9), 0x8b44f7af, 12) + STEP(F, c, d, a, b, SET(10), 0xffff5bb1, 17) + STEP(F, b, c, d, a, SET(11), 0x895cd7be, 22) + STEP(F, a, b, c, d, SET(12), 0x6b901122, 7) + STEP(F, d, a, b, c, SET(13), 0xfd987193, 12) + STEP(F, c, d, a, b, SET(14), 0xa679438e, 17) +STEP (F , b, c, d, a,SET (15 ),0x49b40821 ,22 ) + +/* Round 2 */ + STEP(G, a, b, c, d, GET(1), 0xf61e2562, 5) + STEP(G, d, a, b, c, GET(6), 0xc040b340, 9) + STEP(G, c, d, a, b, GET(11), 0x265e5a51, 14) + STEP(G, b, c, d, a, GET(0), 0xe9b6c7aa, 20) + STEP(G, a, b, c, d, GET(5), 0xd62f105d, 5) + STEP(G, d, a, b, c, GET(10), 0x02441453, 9) + STEP(G, c, d, a, b, GET(15), 0xd8a1e681, 14) + STEP(G, b, c, d, a, GET(4), 0xe7d3fbc8, 20) + STEP(G, a, b, c, d, GET(9), 0x21e1cde6, 5) + STEP(G, d, a, b, c, GET(14), 0xc33707d6, 9) + STEP(G, c, d, a, b, GET(3), 0xf4d50d87, 14) + STEP(G, b, c, d, a, GET(8), 0x455a14ed, 20) + STEP(G, a, b, c, d, GET(13), 0xa9e3e905, 5) + STEP(G, d, a, b, c, GET(2), 0xfcefa3f8, 9) + STEP(G, c, d, a, b, GET(7), 0x676f02d9, 14) +STEP (G , b, c, d, a,GET (12 ),0x8d2a4c8a ,20 ) + +/* Round 3 */ + STEP(H, a, b, c, d, GET(5), 0xfffa3942, 4) + STEP(H2, d, a, b, c, GET(8), 0x8771f681, 11) + STEP(H, c, d, a, b, GET(11), 0x6d9d6122, 16) + STEP(H2, b, c, d, a, GET(14), 0xfde5380c, 23) + STEP(H, a, b, c, d, GET(1), 0xa4beea44, 4) + STEP(H2, d, a, b, c, GET(4), 0x4bdecfa9, 11) + STEP(H, c, d, a, b, GET(7), 0xf6bb4b60, 16) + STEP(H2, b, c, d, a, GET(10), 0xbebfbc70, 23) + STEP(H, a, b, c, d, GET(13), 0x289b7ec6, 4) + STEP(H2, d, a, b, c, GET(0), 0xeaa127fa, 11) + STEP(H, c, d, a, b, GET(3), 0xd4ef3085, 16) + STEP(H2, b, c, d, a, GET(6), 0x04881d05, 23) + STEP(H, a, b, c, d, GET(9), 0xd9d4d039, 4) + STEP(H2, d, a, b, c, GET(12), 0xe6db99e5, 11) + STEP(H, c, d, a, b, GET(15), 0x1fa27cf8, 16) +STEP (H2 , b, c, d, a,GET (2 ),0xc4ac5665 ,23 ) + +/* Round 4 */ + STEP(I, a, b, c, d, GET(0), 0xf4292244, 6) + STEP(I, d, a, b, c, GET(7), 0x432aff97, 10) + STEP(I, c, d, a, b, GET(14), 0xab9423a7, 15) + STEP(I, b, c, d, a, GET(5), 0xfc93a039, 21) + STEP(I, a, b, c, d, GET(12), 0x655b59c3, 6) + STEP(I, d, a, b, c, GET(3), 0x8f0ccc92, 10) + STEP(I, c, d, a, b, GET(10), 0xffeff47d, 15) + STEP(I, b, c, d, a, GET(1), 0x85845dd1, 21) + STEP(I, a, b, c, d, GET(8), 0x6fa87e4f, 6) + STEP(I, d, a, b, c, GET(15), 0xfe2ce6e0, 10) + STEP(I, c, d, a, b, GET(6), 0xa3014314, 15) + STEP(I, b, c, d, a, GET(13), 0x4e0811a1, 21) + STEP(I, a, b, c, d, GET(4), 0xf7537e82, 6) + STEP(I, d, a, b, c, GET(11), 0xbd3af235, 10) + STEP(I, c, d, a, b, GET(2), 0x2ad7d2bb, 15) +STEP (I , b, c, d, a,GET (9 ),0xeb86d391 ,21 ) + + a += saved_a; + b += saved_b; + c += saved_c; + d += saved_d; + + ptr +=64 ; + }while (size -=64 ); + + ctx->a = a; + ctx->b = b; + ctx->c = c; + ctx->d = d; + +return ptr; +} + +void MD5_Init (MD5_CTX *ctx) +{ + ctx->a =0x67452301 ; + ctx->b =0xefcdab89 ; + ctx->c =0x98badcfe ; + ctx->d =0x10325476 ; + + ctx->lo =0 ; + ctx->hi =0 ; +} + +void MD5_Update (MD5_CTX *ctx,const void *data,unsigned long size) +{ +MD5_u32plus saved_lo; +unsigned long used, available; + + saved_lo = ctx->lo; +if ((ctx->lo = (saved_lo + size) &0x1fffffff ) < saved_lo) + ctx->hi++; + ctx->hi += size >>29 ; + + used = saved_lo &0x3f ; + +if (used) { + available =64 - used; + +if (size < available) { +memcpy (&ctx->buffer[used], data, size); +return ; + } + +memcpy (&ctx->buffer[used], data, available); + data = (const unsigned char *)data + available; + size -= available; +body (ctx, ctx->buffer,64 ); + } + +if (size >=64 ) { + data =body (ctx, data, size & ~(unsigned long )0x3f ); + size &=0x3f ; + } + +memcpy (ctx->buffer, data, size); +} + +#define OUT (dst, src) \ + (dst)[0] = (unsigned char)(src); \ + (dst)[1] = (unsigned char)((src) >> 8); \ + (dst)[2] = (unsigned char)((src) >> 16); \ + (dst)[3] = (unsigned char)((src) >> 24); + +void MD5_Final (unsigned char *result,MD5_CTX *ctx) +{ +unsigned long used, available; + + used = ctx->lo &0x3f ; + + ctx->buffer[used++] =0x80 ; + + available =64 - used; + +if (available <8 ) { +memset (&ctx->buffer[used],0 , available); +body (ctx, ctx->buffer,64 ); + used =0 ; + available =64 ; + } + +memset (&ctx->buffer[used],0 , available -8 ); + + ctx->lo <<=3 ; + OUT(&ctx->buffer[56], ctx->lo) + OUT(&ctx->buffer[60], ctx->hi) + +body (ctx, ctx->buffer,64 ); + + OUT(&result[0], ctx->a) + OUT(&result[4], ctx->b) + OUT(&result[8], ctx->c) + OUT(&result[12], ctx->d) + +memset (ctx,0 ,sizeof (*ctx)); +} + +#endif src/md5.h new file +45
-0@@ -0,0 +1,45 @@ +/* +* This is an OpenSSL-compatible implementation of the RSA Data Security, Inc. +* MD5 Message-Digest Algorithm (RFC 1321). +* +* Homepage: +* http://openwall.info/wiki/people/solar/software/public-domain-source-code/md5 +* +* Author: +* Alexander Peslyak, better known as Solar Designer <solar at openwall.com> +* +* This software was written by Alexander Peslyak in 2001. No copyright is +* claimed, and the software is hereby placed in the public domain. +* In case this attempt to disclaim copyright and place the software in the +* public domain is deemed null and void, then the software is +* Copyright (c) 2001 Alexander Peslyak and it is hereby released to the +* general public under the following terms: +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted. +* +* There's ABSOLUTELY NO WARRANTY, express or implied. +* +* See md5.c for more information. +*/ + +#ifdef HAVE_OPENSSL +#include <openssl/md5.h> +#elif !defined(_MD5_H) +#define _MD5_H + +/* Any 32-bit or wider unsigned integer data type will do */ +typedef unsigned int MD5_u32plus ; + +typedef struct { +MD5_u32plus lo, hi; +MD5_u32plus a, b, c, d; +unsigned char buffer[64 ]; +MD5_u32plus block[16 ]; +}MD5_CTX ; + +extern void MD5_Init (MD5_CTX *ctx); +extern void MD5_Update (MD5_CTX *ctx,const void *data,unsigned long size); +extern void MD5_Final (unsigned char *result,MD5_CTX *ctx); + +#endif Signature · 6 lines
2.11.0.rc0.7.gbe5a750 -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html