Add "shutdown" to "struct class".
PATCH v3 1/1 Add "shutdown" to "struct class".
The TPM class has some common shutdown code that must be executed for all drivers. This adds some needed functionality for that.
Usage example: 'tpm: Issue a TPM2_Shutdown for TPM2 devices.' (see https://patchwork.kernel.org/patch/9724919/ for v2).
-----
v2: Add Signed-off-by.
v3: Remove logically separate change.
--- drivers/base/core.c | 5 +++++ include/linux/device.h | 2 ++ 2 files changed, 7 insertions(+)
drivers/base/core.c +5 -0
@@ -2667,6 +2667,11 @@ void device_shutdown(void)pm_runtime_get_noresume (dev);pm_runtime_barrier (dev); +if (dev->class && dev->class->shutdown) { +if (initcall_debug) +dev_info (dev,"shutdown\n" ); + dev->class->shutdown (dev); + }if (dev->bus && dev->bus->shutdown) {if (initcall_debug)dev_info (dev,"shutdown\n" );
include/linux/device.h +2 -0
@@ -378,6 +378,7 @@ int subsys_virtual_register(struct bus_type *subsys,* @suspend: Used to put the device to sleep mode, usually to a low power * state. * @resume: Used to bring the device from the sleep mode. +* @shutdown: Called at shut-down time to quiesce the device. * @ns_type: Callbacks so sysfs can detemine namespaces. * @namespace: Namespace of the device belongs to this class. * @pm: The default device power management operations of this class.
@@ -407,6 +408,7 @@ struct class {int (*suspend)(struct device *dev,pm_message_t state);int (*resume)(struct device *dev); +int (*shutdown)(struct device *dev);const struct kobj_ns_type_operations *ns_type;const void *(*namespace)(struct device *dev);
Signature · 6 lines
2.13.0.rc2.291.g57267f2277-goog ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
(Continuing thread from patch v1)
Quoted 9 lines
Quoted 9 lines · Tomas
Quoted 7 lines
Quoted 2 lines
The TPM class has some common shutdown code that must be executed for all drivers. This adds some needed functionality for that
The issue with this is, that on some platforms the only storage can be eMMC and TPM is using it,. It has to be ensured that the storage device won't go down before
TPM2_shutdownis called. And there is no direct device hierarchy to ensure an orderly shutdown.
Quoted 5 lines
Quoted 2 lines
Something will have to use the new device links stuff to define that dependency, but that seems unrelated to this patch?
Yep, it's not directly related to this specific patch, this is more relevant particularly to
TPM2_shutdown.
Jason, do you want me to do that in my patch on the tpmdd-devel list? If so, mind giving me a documentation pointer or two? I'm not familiar with this area.
Thanks,
Josh
Quoted 14 lines · Josh Zimmerman
(Continuing thread from patch v1)
Quoted 13 lines
Quoted 11 lines · Tomas
Quoted 7 lines
Quoted 2 lines
The TPM class has some common shutdown code that must be executed for all drivers. This adds some needed functionality for that
The issue with this is, that on some platforms the only storage can be eMMC and TPM is using it,. It has to be ensured that the storage device won't go down before
TPM2_shutdownis called. And there is no direct device hierarchy to ensure an orderly shutdown.Something will have to use the new device links stuff to define that dependency, but that seems unrelated to this patch?
Quoted 5 lines
Quoted 1 line
Yep, it's not directly related to this specific patch, this is more relevant particularly to
TPM2_shutdown.Jason, do you want me to do that in my patch on the tpmdd-devel list? If so, mind giving me a documentation pointer or two? I'm not familiar with this area.
No.. Ordering power management events is something someone with knowledge of the specific emmc platform is going to have to tackle.. It isn't really a core problem, platform specific code will have to setup the needed device links to order power management properly..
Jason
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
Quoted 32 lines
-----Original Message-----
From: Jason Gunthorpe [mailto:jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org]
Sent: Monday, May 15, 2017 20:46
To: Josh Zimmerman <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>; linux- [email protected]; Winkler, Tomas <[email protected]>; Jarkko Sakkinen <jarkko.sakkinen-VuQAYsv1563Yd54FQh9/[email protected]>; tpmdd- [email protected]
Subject: Re: [PATCH v3] Add "shutdown" to "struct class".Quoted 10 lines · Josh Zimmerman
(Continuing thread from patch v1)
Quoted 9 lines
Quoted 9 lines · Tomas
Quoted 8 lines
Quoted 3 lines
The TPM class has some common shutdown code that must be executed for all drivers. This adds some needed functionality for that
The issue with this is, that on some platforms the only storage can be eMMC and TPM is using it,. It has to be ensured that the storage device won't go down before
TPM2_shutdownis called. And there is no direct device hierarchy to ensure an orderlyshutdown.
Quoted 6 lines
Quoted 6 lines
Quoted 3 lines
Something will have to use the new device links stuff to define that dependency, but that seems unrelated to this patch?
Yep, it's not directly related to this specific patch, this is more relevant
particularly to
TPM2_shutdown.Quoted 1 line
Quoted 8 lines
Quoted 3 lines
Jason, do you want me to do that in my patch on the tpmdd-devel list? If so, mind giving me a documentation pointer or two? I'm not familiar with this area.
No.. Ordering power management events is something someone with knowledge of the specific emmc platform is going to have to tackle.. It isn't really a core problem, platform specific code will have to setup the needed device links to order power management properly..
eMMC is just an example, that can be other storage device (ufs, nvme) and some type of abstraction of underlying storage dependency would be required. I just wanted to put it on the table, not sure it has to be solved in this round. Tomas
Quoted 2 lines
Jason
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
Are there any more changes any of you would like to see in this patch?
Thanks!
Josh
Quoted 36 lines · Tomas
Quoted 36 lines
-----Original Message-----
From: Jason Gunthorpe [mailto:jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org]
Sent: Monday, May 15, 2017 20:46
To: Josh Zimmerman <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>; linux- [email protected]; Winkler, Tomas <[email protected]>; Jarkko Sakkinen <jarkko.sakkinen-VuQAYsv1563Yd54FQh9/[email protected]>; tpmdd- [email protected]
Subject: Re: [PATCH v3] Add "shutdown" to "struct class".Quoted 10 lines · Josh Zimmerman
(Continuing thread from patch v1)
Quoted 9 lines
Quoted 9 lines · Tomas
Quoted 8 lines
Quoted 3 lines
The TPM class has some common shutdown code that must be executed for all drivers. This adds some needed functionality for that
The issue with this is, that on some platforms the only storage can be eMMC and TPM is using it,. It has to be ensured that the storage device won't go down before
TPM2_shutdownis called. And there is no direct device hierarchy to ensure an orderlyshutdown.
Quoted 6 lines
Quoted 6 lines
Quoted 3 lines
Something will have to use the new device links stuff to define that dependency, but that seems unrelated to this patch?
Yep, it's not directly related to this specific patch, this is more relevant
particularly to
TPM2_shutdown.Quoted 4 lines
Jason, do you want me to do that in my patch on the tpmdd-devel list? If so, mind giving me a documentation pointer or two? I'm not familiar with this area.
Quoted 14 lines
Quoted 4 lines
No.. Ordering power management events is something someone with knowledge of the specific emmc platform is going to have to tackle.. It isn't really a core problem, platform specific code will have to setup the needed device links to order power management properly..
eMMC is just an example, that can be other storage device (ufs, nvme) and some type of abstraction of underlying storage dependency would be required. I just wanted to put it on the table, not sure it has to be solved in this round. Tomas
Quoted 2 lines
Jason
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
Quoted 7 lines · Josh Zimmerman
The TPM class has some common shutdown code that must be executed for all drivers. This adds some needed functionality for that.
Usage example: 'tpm: Issue a
TPM2_Shutdownfor TPM2 devices.' (see https://patchwork.kernel.org/patch/9724919/ for v2).Signed-off-by Josh Zimmerman <[email protected]>
Given that the tpm code is going to need this, I recommend someone take it through that tree:
Otherwise, if you want me to take it, I can, but I doubt you want it in my driver-core tree as that will not get merged to Linus until 4.13-rc1.
thanks,
greg k-h
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
Thanks, Greg.
Greg, Jarkko: Do either of you you have any objections to me backporting these changes to 4.4 and 4.9? I'd like to make sure that at least the couple most recent LTS kernels have this patch. (I don't care so much about 4.1 as it'll be EOL'd this September, according to
https://www.kernel.org/category/releases.html, but I can backport it to there as well if desired.)
Thanks,
Josh
Quoted 13 lines · Greg Kroah-Hartman
Quoted 7 lines · Josh Zimmerman
The TPM class has some common shutdown code that must be executed for all drivers. This adds some needed functionality for that.
Usage example: 'tpm: Issue a
TPM2_Shutdownfor TPM2 devices.' (see https://patchwork.kernel.org/patch/9724919/ for v2).Signed-off-by Josh Zimmerman <[email protected]>Given that the tpm code is going to need this, I recommend someone take it through that tree:
Quoted 8 lines
Otherwise, if you want me to take it, I can, but I doubt you want it in my driver-core tree as that will not get merged to Linus until 4.13-rc1.
thanks,
greg k-h
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
Greg Kroah-Hartman
maintainerQuoted 5 lines · Josh Zimmerman
Thanks, Greg.
Greg, Jarkko: Do either of you you have any objections to me backporting these changes to 4.4 and 4.9? I'd like to make sure that at least the couple most recent LTS kernels have this patch.
Why? What bug does this solve? If it meets the rules of Documentation/stable_kernel_rules.txt (or whereever that file moved to), that's fine with me.
thanks,
greg k-h
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
Quoted 8 lines · Greg Kroah-Hartman
Quoted 5 lines · Josh Zimmerman
Thanks, Greg.
Greg, Jarkko: Do either of you you have any objections to me backporting these changes to 4.4 and 4.9? I'd like to make sure that at least the couple most recent LTS kernels have this patch.
Why? What bug does this solve?
If a TPM2 device has power removed without a TPM2_Shutdown being issued, it will increment its "dictionary attack" counter. After that counter reaches a certain value, the TPM2 device will lock the user out. Adding the shutdown callback allows the TPM kernel driver to send TPM2_Shutdown to all TPM2 devices.
Quoted 3 lines
If it meets the rules of
Documentation/stable_kernel_rules.txt(or whereever that file moved to), that's fine with me.
Documentation/process/stable-kernel-rules.rst, right? To comply with option 1 referred to there (Adding the appropriate "Cc:" to the description), should I send a new patch email or just reply to this one and quote the relevant part? (I don't believe the document specifies.)
Thanks,
Josh
Greg Kroah-Hartman
maintainerQuoted 9 lines · Josh Zimmerman
Quoted 7 lines · Greg Kroah-Hartman
Quoted 5 lines · Josh Zimmerman
Thanks, Greg.
Greg, Jarkko: Do either of you you have any objections to me backporting these changes to 4.4 and 4.9? I'd like to make sure that at least the couple most recent LTS kernels have this patch.
Quoted 6 lines
Quoted 1 line
Why? What bug does this solve?
If a TPM2 device has power removed without a
TPM2_Shutdownbeing issued, it will increment its "dictionary attack" counter. After that counter reaches a certain value, the TPM2 device will lock the user out. Adding the shutdown callback allows the TPM kernel driver to sendTPM2_Shutdownto all TPM2 devices.
Is all of that in the tpm patch description? If so, great, if not, please add it.
Quoted 8 lines
Quoted 3 lines
If it meets the rules of
Documentation/stable_kernel_rules.txt(or whereever that file moved to), that's fine with me.
Documentation/process/stable-kernel-rules.rst, right? To comply with option 1 referred to there (Adding the appropriate "Cc:" to the description), should I send a new patch email or just reply to this one and quote the relevant part? (I don't believe the document specifies.)
You (or who ever applies these patches) needs to add the cc: stable tag to them. I suggest resend these, as a patch series, with that in it, so that it all makes more sense and the tpm maintainer has an easy job of it.
thanks,
greg k-h
Josh,
Quoted 29 lines · Greg Kroah-Hartman
Quoted 9 lines · Josh Zimmerman
Quoted 7 lines · Greg Kroah-Hartman
Quoted 5 lines · Josh Zimmerman
Thanks, Greg.
Greg, Jarkko: Do either of you you have any objections to me backporting these changes to 4.4 and 4.9? I'd like to make sure that at least the couple most recent LTS kernels have this patch.
Quoted 6 lines
Quoted 1 line
Why? What bug does this solve?
If a TPM2 device has power removed without a
TPM2_Shutdownbeing issued, it will increment its "dictionary attack" counter. After that counter reaches a certain value, the TPM2 device will lock the user out. Adding the shutdown callback allows the TPM kernel driver to sendTPM2_Shutdownto all TPM2 devices.Is all of that in the tpm patch description? If so, great, if not, please add it.
Quoted 8 lines
Quoted 3 lines
If it meets the rules of
Documentation/stable_kernel_rules.txt(or whereever that file moved to), that's fine with me.
Documentation/process/stable-kernel-rules.rst, right? To comply with option 1 referred to there (Adding the appropriate "Cc:" to the description), should I send a new patch email or just reply to this one and quote the relevant part? (I don't believe the document specifies.)
Quoted 8 lines
You (or who ever applies these patches) needs to add the cc: stable tag to them. I suggest resend these, as a patch series, with that in it, so that it all makes more sense and the tpm maintainer has an easy job of it.
thanks,
greg k-h
Can you send one more patch set with these two patches and Cc-tags and refined descriptions where needed. If you do this, I will apply them to my tree and send PR to James Morris. Thank you.
/Jarkko
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
Quoted 9 lines · Josh Zimmerman
Thanks, Greg.
Greg, Jarkko: Do either of you you have any objections to me backporting these changes to 4.4 and 4.9? I'd like to make sure that at least the couple most recent LTS kernels have this patch. (I don't care so much about 4.1 as it'll be EOL'd this September, according to
https://www.kernel.org/category/releases.html, but I can backport it to there as well if desired.)
Quoted 3 lines
Thanks,
Josh
Nope.
/Jarkko
Quoted 16 lines
Quoted 13 lines · Greg Kroah-Hartman
Quoted 7 lines · Josh Zimmerman
The TPM class has some common shutdown code that must be executed for all drivers. This adds some needed functionality for that.
Usage example: 'tpm: Issue a
TPM2_Shutdownfor TPM2 devices.' (see https://patchwork.kernel.org/patch/9724919/ for v2).Signed-off-by Josh Zimmerman <[email protected]>Given that the tpm code is going to need this, I recommend someone take it through that tree:
Quoted 8 lines
Quoted 8 lines
Otherwise, if you want me to take it, I can, but I doubt you want it in my driver-core tree as that will not get merged to Linus until 4.13-rc1.
thanks,
greg k-h
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
Quoted 12 lines · Greg Kroah-Hartman
Quoted 7 lines · Josh Zimmerman
The TPM class has some common shutdown code that must be executed for all drivers. This adds some needed functionality for that.
Usage example: 'tpm: Issue a
TPM2_Shutdownfor TPM2 devices.' (see https://patchwork.kernel.org/patch/9724919/ for v2).Signed-off-by Josh Zimmerman <[email protected]>Given that the tpm code is going to need this, I recommend someone take it through that tree:
Quoted 8 lines
Otherwise, if you want me to take it, I can, but I doubt you want it in my driver-core tree as that will not get merged to Linus until 4.13-rc1.
thanks,
greg k-h
I can take this to the tpmdd tree. For me only thing that matters that there isn't collisions. If we all agree on this, I'll apply Josh's patches and include to my next PR.
/Jarkko
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot