Skip to contentSkip to conversation

drm/i915/gen10+: use the SKL code for reading WM latencies

PATCH In review Rodrigo Vivi 5 participants 13 messages Aug 9, 2017 – Aug 16, 2017

Subsystems (2)
lore
Share & tools
lore

Rodrigo Vivi

author maintainer
#0 lore raw

PATCH 1/6 drm/i915/gen10+: use the SKL code for reading WM latencies

From: Paulo Zanoni <[email protected]>

Gen 10 should use the exact same code as Gen 9, so change the check to take this into consideration, and also assume that future platforms will run this code.

Also add a MISSING_CASE(), just in case we do something wrong, instead of silently failing.

Cc Mahesh Kumar <[email protected]>
Cc Maarten Lankhorst <[email protected]>
---
 drivers/gpu/drm/i915/intel_pm.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +4 -2
index 6e393b217450..00c857381d9d 100644
@@ -2764,7 +2764,7 @@ hsw_compute_linetime_wm(const struct intel_crtc_state *cstate)
 static void intel_read_wm_latency(struct drm_i915_private *dev_priv,
 				  uint16_t wm[8])
 {
-	if (IS_GEN9(dev_priv)) {
+	if (INTEL_GEN(dev_priv) >= 9) {
 		uint32_t val;
 		int ret, i;
 		int level, max_level = ilk_wm_max_level(dev_priv);
@@ -2824,7 +2824,7 @@ static void intel_read_wm_latency(struct drm_i915_private *dev_priv,
 		}
 
 		/*
-		 * WaWmMemoryReadLatency:skl,glk
+		 * WaWmMemoryReadLatency:skl+,glk
 		 *
 		 * punit doesn't take into account the read latency so we need
 		 * to add 2us to the various latency levels we retrieve from the
@@ -2863,6 +2863,8 @@ static void intel_read_wm_latency(struct drm_i915_private *dev_priv,
 		wm[0] = 7;
 		wm[1] = (mltr >> MLTR_WM1_SHIFT) & ILK_SRLT_MASK;
 		wm[2] = (mltr >> MLTR_WM2_SHIFT) & ILK_SRLT_MASK;
+	} else {
+		MISSING_CASE(INTEL_DEVID(dev_priv));
 	}
 }
 
Signature · 6 lines
2.13.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#1 lore raw

PATCH 2/6 drm/i915/cnl: Enable SAGV for Cannonlake.

For now inherit from previous platforms.

v2: Rebase on top of CFL.

Cc Mahesh Kumar <[email protected]>
Cc Maarten Lankhorst <[email protected]>
Cc Paulo Zanoni <[email protected]>
---
 drivers/gpu/drm/i915/intel_pm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_pm.c +2 -1
index 00c857381d9d..47b0be404acb 100644
@@ -3557,7 +3557,8 @@ static bool skl_needs_memory_bw_wa(struct intel_atomic_state *state)
 static bool
 intel_has_sagv(struct drm_i915_private *dev_priv)
 {
-	if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv))
+	if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv) ||
+	    IS_CANNONLAKE(dev_priv))
 		return true;
 
 	if (IS_SKYLAKE(dev_priv) &&
Signature · 6 lines
2.13.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#2 lore raw

PATCH 3/6 drm/i915/gen10: fix the gen 10 SAGV block time

In reply to Rodrigo Vivi

From: Paulo Zanoni <[email protected]>

A previous commit added CNL to intel_has_sagv(), but forgot to adjust the SAGV block time to gen 10 platforms.

Cc Mahesh Kumar <[email protected]>
Cc Maarten Lankhorst <[email protected]>
---
 drivers/gpu/drm/i915/intel_pm.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +6 -7
index 47b0be404acb..dac05ff1f970 100644
@@ -3538,8 +3538,6 @@ bool ilk_disable_lp_wm(struct drm_device *dev)
 	return _ilk_disable_lp_wm(dev_priv, WM_DIRTY_LP_ALL);
 }
 
-#define SKL_SAGV_BLOCK_TIME	30 /* µs */
-
 /*
  * FIXME: We still don't have the proper code detect if we need to apply the WA,
  * so assume we'll always need it in order to avoid underruns.
@@ -3664,12 +3662,13 @@ bool intel_can_enable_sagv(struct drm_atomic_state *state)
 	struct intel_crtc_state *cstate;
 	enum pipe pipe;
 	int level, latency;
+	int sagv_block_time_us = IS_GEN9(dev_priv) ? 30 : 20;
 
 	if (!intel_has_sagv(dev_priv))
 		return false;
 
 	/*
-	 * SKL workaround: bspec recommends we disable the SAGV when we have
+	 * SKL+ workaround: bspec recommends we disable the SAGV when we have
 	 * more then one pipe enabled
 	 *
 	 * If there are no active CRTCs, no additional checks need be performed
@@ -3708,11 +3707,11 @@ bool intel_can_enable_sagv(struct drm_atomic_state *state)
 			latency += 15;
 
 		/*
-		 * If any of the planes on this pipe don't enable wm levels
-		 * that incur memory latencies higher then 30µs we can't enable
-		 * the SAGV
+		 * If any of the planes on this pipe don't enable wm levels that
+		 * incur memory latencies higher than sagv_block_time_us we
+		 * can't enable the SAGV.
 		 */
-		if (latency < SKL_SAGV_BLOCK_TIME)
+		if (latency < sagv_block_time_us)
 			return false;
 	}
 
Signature · 6 lines
2.13.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#3 lore raw

PATCH 4/6 drm/i915/gen10: fix WM latency printing

In reply to Rodrigo Vivi

From: Paulo Zanoni <[email protected]>

Gen 10 is just like Gen 9, so let's consider that all the future platforms are going to be like gen 9 instead of being like gen8-.

Cc Mahesh Kumar <[email protected]>
Cc Maarten Lankhorst <[email protected]>
---
 drivers/gpu/drm/i915/intel_pm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_pm.c +1 -1
index dac05ff1f970..1622e6f3c6b6 100644
@@ -2920,7 +2920,7 @@ static void intel_print_wm_latency(struct drm_i915_private *dev_priv,
 		 * - latencies are in us on gen9.
 		 * - before then, WM1+ latency values are in 0.5us units
 		 */
-		if (IS_GEN9(dev_priv))
+		if (INTEL_GEN(dev_priv) >= 9)
 			latency *= 10;
 		else if (level > 0)
 			latency *= 5;
Signature · 6 lines
2.13.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#4 lore raw

PATCH 5/6 drm/i915/gen10: implement gen 10 watermarks calculations

In reply to Rodrigo Vivi

From: Paulo Zanoni <[email protected]>

They're slightly different than the gen 9 calculations.

v2: Remove TODO comment. Code matches recent spec.

Cc Mahesh Kumar <[email protected]>
Cc Maarten Lankhorst <[email protected]>
---
 drivers/gpu/drm/i915/intel_pm.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +15 -6
index 1622e6f3c6b6..857e2f0a4b15 100644
@@ -4274,8 +4274,9 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
  * should allow pixel_rate up to ~2 GHz which seems sufficient since max
  * 2xcdclk is 1350 MHz and the pixel rate should never exceed that.
 */
-static uint_fixed_16_16_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp,
-					 uint32_t latency)
+static uint_fixed_16_16_t
+skl_wm_method1(const struct drm_i915_private *dev_priv, uint32_t pixel_rate,
+	       uint8_t cpp, uint32_t latency)
 {
 	uint32_t wm_intermediate_val;
 	uint_fixed_16_16_t ret;
@@ -4285,6 +4286,10 @@ static uint_fixed_16_16_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp,
 
 	wm_intermediate_val = latency * pixel_rate * cpp;
 	ret = div_fixed16(wm_intermediate_val, 1000 * 512);
+
+	if (INTEL_GEN(dev_priv) >= 10)
+		ret.val += 1 << 16;
+
 	return ret;
 }
 
@@ -4436,11 +4441,15 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 
 	plane_bytes_per_line = width * cpp;
 	if (y_tiled) {
-		interm_pbpl = DIV_ROUND_UP(plane_bytes_per_line *
-					   y_min_scanlines, 512);
+		interm_pbpl = plane_bytes_per_line * y_min_scanlines;
+
+		if (INTEL_GEN(dev_priv) >= 10)
+			interm_pbpl++;
+
+		interm_pbpl = DIV_ROUND_UP(interm_pbpl, 512);
 		plane_blocks_per_line = div_fixed16(interm_pbpl,
 							y_min_scanlines);
-	} else if (x_tiled) {
+	} else if (x_tiled && INTEL_GEN(dev_priv) == 9) {
 		interm_pbpl = DIV_ROUND_UP(plane_bytes_per_line, 512);
 		plane_blocks_per_line = u32_to_fixed16(interm_pbpl);
 	} else {
@@ -4448,7 +4457,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 		plane_blocks_per_line = u32_to_fixed16(interm_pbpl);
 	}
 
-	method1 = skl_wm_method1(plane_pixel_rate, cpp, latency);
+	method1 = skl_wm_method1(dev_priv, plane_pixel_rate, cpp, latency);
 	method2 = skl_wm_method2(plane_pixel_rate,
 				 cstate->base.adjusted_mode.crtc_htotal,
 				 latency,
Signature · 6 lines
2.13.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

Re: [PATCH 5/6] drm/i915/gen10: implement gen 10 watermarks calculations

Hi,

Quoted 31 lines · Rodrigo Vivi

From: Paulo Zanoni <[email protected]>

They're slightly different than the gen 9 calculations.

v2: Remove TODO comment. Code matches recent spec.

Cc Mahesh Kumar <[email protected]>
Cc Maarten Lankhorst <[email protected]>
---
  drivers/gpu/drm/i915/intel_pm.c | 21 +++++++++++++++------
  1 file changed, 15 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +3 -2
index 1622e6f3c6b6..857e2f0a4b15 100644
@@ -4274,8 +4274,9 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
   * should allow pixel_rate up to ~2 GHz which seems sufficient since max
   * 2xcdclk is 1350 MHz and the pixel rate should never exceed that.
  */
-static uint_fixed_16_16_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp,
-					 uint32_t latency)
+static uint_fixed_16_16_t
+skl_wm_method1(const struct drm_i915_private *dev_priv, uint32_t pixel_rate,
+	       uint8_t cpp, uint32_t latency)
  {
  	uint32_t wm_intermediate_val;
  	uint_fixed_16_16_t ret;

drivers/gpu/drm/i915/intel_pm.c static uint_fixed_16_16_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp, · line 4291

Quoted 6 lines
drivers/gpu/drm/i915/intel_pm.c +3 -0
@@ -4285,6 +4286,10 @@ static uint_fixed_16_16_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp,
 
  	wm_intermediate_val = latency * pixel_rate * cpp;
  	ret = div_fixed16(wm_intermediate_val, 1000 * 512);
+
+	if (INTEL_GEN(dev_priv) >= 10)
+		ret.val += 1 << 16;

Please use available fp16.16 wrapper to add

       ret = add_fixed16_u32(ret, 1);
Quoted 6 lines
drivers/gpu/drm/i915/intel_pm.c +1 -0
+
  	return ret;
  }
 
@@ -4436,11 +4441,15 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 

drivers/gpu/drm/i915/intel_pm.c static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv, · line 4449

Quoted 10 lines
drivers/gpu/drm/i915/intel_pm.c +6 -2
  	plane_bytes_per_line = width * cpp;
  	if (y_tiled) {
-		interm_pbpl = DIV_ROUND_UP(plane_bytes_per_line *
-					   y_min_scanlines, 512);
+		interm_pbpl = plane_bytes_per_line * y_min_scanlines;
+
+		if (INTEL_GEN(dev_priv) >= 10)
+			interm_pbpl++;
+
+		interm_pbpl = DIV_ROUND_UP(interm_pbpl, 512);

It looks wrong, my interpretation of Bspec is:
interm_pbpl = DIV_ROUND_UP(plane_bytes_per_line *

y_min_scanlines, 512);
                 if (INTEL_GEN(dev_priv) >= 10)
                        interm_pbpl++;

-Mahesh

Quoted 8 lines
drivers/gpu/drm/i915/intel_pm.c +1 -1
  		plane_blocks_per_line = div_fixed16(interm_pbpl,
  							y_min_scanlines);
-	} else if (x_tiled) {
+	} else if (x_tiled && INTEL_GEN(dev_priv) == 9) {
  		interm_pbpl = DIV_ROUND_UP(plane_bytes_per_line, 512);
  		plane_blocks_per_line = u32_to_fixed16(interm_pbpl);
  	} else {

drivers/gpu/drm/i915/intel_pm.c static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv, · line 4463

Quoted 8 lines
drivers/gpu/drm/i915/intel_pm.c +1 -1
@@ -4448,7 +4457,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
  		plane_blocks_per_line = u32_to_fixed16(interm_pbpl);
  	}
 
-	method1 = skl_wm_method1(plane_pixel_rate, cpp, latency);
+	method1 = skl_wm_method1(dev_priv, plane_pixel_rate, cpp, latency);
  	method2 = skl_wm_method2(plane_pixel_rate,
  				 cstate->base.adjusted_mode.crtc_htotal,
  				 latency,

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author maintainer
#6 lore raw

PATCH 1/1 drm/i915/gen10: implement gen 10 watermarks calculations

From: Paulo Zanoni <[email protected]>

They're slightly different than the gen 9 calculations.

v2: Remove TODO comment. Code matches recent spec.
v3: Rebase on top of latest skl code using new fp16.16 and
fixing a logic issue. Auto rebase bot has apparently made some bad decisions that changed the logic of the code. (Noticed by Manesh, updated by Rodrigo).

Cc Mahesh Kumar <[email protected]>
Cc Maarten Lankhorst <[email protected]>
---
 drivers/gpu/drm/i915/intel_pm.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +13 -4
index 66495ad36973..ed662937ec3c 100644
@@ -4290,8 +4290,9 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
  * should allow pixel_rate up to ~2 GHz which seems sufficient since max
  * 2xcdclk is 1350 MHz and the pixel rate should never exceed that.
 */
-static uint_fixed_16_16_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp,
-					 uint32_t latency)
+static uint_fixed_16_16_t
+skl_wm_method1(const struct drm_i915_private *dev_priv, uint32_t pixel_rate,
+	       uint8_t cpp, uint32_t latency)
 {
 	uint32_t wm_intermediate_val;
 	uint_fixed_16_16_t ret;
@@ -4301,6 +4302,10 @@ static uint_fixed_16_16_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp,
 
 	wm_intermediate_val = latency * pixel_rate * cpp;
 	ret = div_fixed16(wm_intermediate_val, 1000 * 512);
+
+	if (INTEL_GEN(dev_priv) >= 10)
+		ret = add_fixed16_u32(ret, 1);
+
 	return ret;
 }
 
@@ -4456,9 +4461,13 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 	if (y_tiled) {
 		interm_pbpl = DIV_ROUND_UP(plane_bytes_per_line *
 					   y_min_scanlines, 512);
+
+		if (INTEL_GEN(dev_priv) >= 10)
+			interm_pbpl++;
+
 		plane_blocks_per_line = div_fixed16(interm_pbpl,
 							y_min_scanlines);
-	} else if (x_tiled) {
+	} else if (x_tiled && INTEL_GEN(dev_priv) == 9) {
 		interm_pbpl = DIV_ROUND_UP(plane_bytes_per_line, 512);
 		plane_blocks_per_line = u32_to_fixed16(interm_pbpl);
 	} else {
@@ -4466,7 +4475,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 		plane_blocks_per_line = u32_to_fixed16(interm_pbpl);
 	}
 
-	method1 = skl_wm_method1(plane_pixel_rate, cpp, latency);
+	method1 = skl_wm_method1(dev_priv, plane_pixel_rate, cpp, latency);
 	method2 = skl_wm_method2(plane_pixel_rate,
 				 cstate->base.adjusted_mode.crtc_htotal,
 				 latency,
Signature · 6 lines
2.13.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 1/1
#7 lore raw

Re: [PATCH] drm/i915/gen10: implement gen 10 watermarks calculations

patch looks good to me,

Quoted 5 lines · Rodrigo Vivi

comment. Code matches recent spec.
v3: Rebase on top of latest skl code using new fp16.16 and
fixing a logic issue. Auto rebase bot has apparently made some bad decisions that changed the logic of the code. (Noticed by Manesh, updated by Rodrigo).

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#8 lore raw

Re: [PATCH] drm/i915/gen10: implement gen 10 watermarks calculations

this patch and patch 6 merged to dinq. thanks for patch and for the reviews.

Quoted 20 lines · Mahesh Kumar

patch looks good to me,

On Saturday 12 August 2017 05:08 AM, Rodrigo Vivi wrote:

comment. Code matches recent spec.
v3: Rebase on top of latest skl code using new fp16.16 and
fixing a logic issue. Auto rebase bot has apparently made some bad decisions that changed the logic of the code. (Noticed by Manesh, updated by Rodrigo).

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Signature · 6 lines
Rodrigo Vivi
Blog: http://blog.vivi.eng.br
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author maintainer
#9 lore raw

PATCH 6/6 drm/i915/cnl: Reuse skl_wm_get_hw_state on Cannonlake.

In reply to Rodrigo Vivi

Otherwise it reuses the ilk that has a completely different wm.

Cc Mahesh Kumar <[email protected]>
Cc Maarten Lankhorst <[email protected]>
Cc Paulo Zanoni <[email protected]>
---
 drivers/gpu/drm/i915/intel_display.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_display.c +1 -1
index e4af56b5ff27..ca988f4c4739 100644
@@ -14702,7 +14702,7 @@ intel_modeset_setup_hw_state(struct drm_device *dev,
 	} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
 		vlv_wm_get_hw_state(dev);
 		vlv_wm_sanitize(dev_priv);
-	} else if (IS_GEN9(dev_priv)) {
+	} else if (INTEL_GEN(dev_priv) >= 9) {
 		skl_wm_get_hw_state(dev);
 	} else if (HAS_PCH_SPLIT(dev_priv)) {
 		ilk_wm_get_hw_state(dev);
Signature · 6 lines
2.13.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 6/6
#10 lore raw

Re: [PATCH 6/6] drm/i915/cnl: Reuse skl_wm_get_hw_state on Cannonlake.

Op 09-08-17 om 22:52 schreef Rodrigo Vivi:

Quoted 16 lines

Otherwise it reuses the ilk that has a completely different wm.

Cc Mahesh Kumar <[email protected]>
Cc Maarten Lankhorst <[email protected]>
Cc Paulo Zanoni <[email protected]>
---
 drivers/gpu/drm/i915/intel_display.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_display.c +0 -0
index e4af56b5ff27..ca988f4c4739 100644

drivers/gpu/drm/i915/intel_display.c intel_modeset_setup_hw_state(struct drm_device *dev, · line 14708

Quoted 8 lines
drivers/gpu/drm/i915/intel_display.c +1 -1
@@ -14702,7 +14702,7 @@ intel_modeset_setup_hw_state(struct drm_device *dev,
 	} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
 		vlv_wm_get_hw_state(dev);
 		vlv_wm_sanitize(dev_priv);
-	} else if (IS_GEN9(dev_priv)) {
+	} else if (INTEL_GEN(dev_priv) >= 9) {
 		skl_wm_get_hw_state(dev);
 	} else if (HAS_PCH_SPLIT(dev_priv)) {
 		ilk_wm_get_hw_state(dev);

For patches 1-4 + 6:

I'll have to look closer at patch 5 with spec in hand. :)

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#11 lore raw

✓ Fi.CI.BAT: success for series starting with [1/6] drm/i915/gen10+: use the SKL code for reading WM latencies

In reply to Rodrigo Vivi
== Series Details ==

== Series Details ==

Series: series starting with [1/6] drm/i915/gen10+: use the SKL code for reading WM latencies
URL : https://patchwork.freedesktop.org/series/28586/
State : success

== Summary ==

Series 28586v1 Series without cover letter
https://patchwork.freedesktop.org/api/1.0/series/28586/revisions/1/mbox/

Test gem_exec_flush:

        Subgroup basic-batch-kernel-default-uc:
                fail       -> PASS       (fi-snb-2600) fdo#100007

fdo#100007 https://bugs.freedesktop.org/show_bug.cgi?id=100007

fi-bdw-5557u     total:279  pass:268  dwarn:0   dfail:0   fail:0   skip:11  time:434s
fi-bdw-gvtdvm    total:279  pass:265  dwarn:0   dfail:0   fail:0   skip:14  time:414s
fi-blb-e6850     total:279  pass:224  dwarn:1   dfail:0   fail:0   skip:54  time:356s
fi-bsw-n3050     total:279  pass:243  dwarn:0   dfail:0   fail:0   skip:36  time:493s
fi-bxt-j4205     total:279  pass:260  dwarn:0   dfail:0   fail:0   skip:19  time:499s
fi-byt-j1900     total:279  pass:254  dwarn:1   dfail:0   fail:0   skip:24  time:516s
fi-byt-n2820     total:279  pass:250  dwarn:1   dfail:0   fail:0   skip:28  time:514s
fi-glk-2a        total:279  pass:260  dwarn:0   dfail:0   fail:0   skip:19  time:587s
fi-hsw-4770      total:279  pass:263  dwarn:0   dfail:0   fail:0   skip:16  time:428s
fi-hsw-4770r     total:279  pass:263  dwarn:0   dfail:0   fail:0   skip:16  time:407s
fi-ilk-650       total:279  pass:229  dwarn:0   dfail:0   fail:0   skip:50  time:418s
fi-ivb-3520m     total:279  pass:261  dwarn:0   dfail:0   fail:0   skip:18  time:514s
fi-ivb-3770      total:279  pass:261  dwarn:0   dfail:0   fail:0   skip:18  time:476s
fi-kbl-7500u     total:279  pass:261  dwarn:0   dfail:0   fail:0   skip:18  time:459s
fi-kbl-7560u     total:279  pass:269  dwarn:0   dfail:0   fail:0   skip:10  time:567s
fi-kbl-r         total:279  pass:261  dwarn:0   dfail:0   fail:0   skip:18  time:579s
fi-pnv-d510      total:279  pass:223  dwarn:1   dfail:0   fail:0   skip:55  time:526s
fi-skl-6260u     total:279  pass:269  dwarn:0   dfail:0   fail:0   skip:10  time:458s
fi-skl-6700k     total:279  pass:261  dwarn:0   dfail:0   fail:0   skip:18  time:641s
fi-skl-6770hq    total:279  pass:269  dwarn:0   dfail:0   fail:0   skip:10  time:471s
fi-skl-gvtdvm    total:279  pass:266  dwarn:0   dfail:0   fail:0   skip:13  time:428s
fi-skl-x1585l    total:279  pass:269  dwarn:0   dfail:0   fail:0   skip:10  time:507s
fi-snb-2520m     total:279  pass:251  dwarn:0   dfail:0   fail:0   skip:28  time:561s
fi-snb-2600      total:279  pass:250  dwarn:0   dfail:0   fail:0   skip:29  time:409s

2d0288b5b28c0d67460f0258a41bb4f78b812f29 drm-tip: 2017y-08m-09d-18h-09m-54s UTC integration manifest 07ca54e7a4a6 drm/i915/cnl: Reuse skl_wm_get_hw_state on Cannonlake.
268de0460e3d drm/i915/gen10: implement gen 10 watermarks calculations
7bcdb9cec9cf drm/i915/gen10: fix WM latency printing
86c2a38e1713 drm/i915/gen10: fix the gen 10 SAGV block time
e49af26ba154 drm/i915/cnl: Enable SAGV for Cannonlake.
8029ad292d01 drm/i915/gen10+: use the SKL code for reading WM latencies

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5359/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#12 lore raw

✓ Fi.CI.BAT: success for series starting with [1/6] drm/i915/gen10+: use the SKL code for reading WM latencies (rev2)

In reply to Rodrigo Vivi
== Series Details ==

== Series Details ==

Series: series starting with [1/6] drm/i915/gen10+: use the SKL code for reading WM latencies (rev2)
URL : https://patchwork.freedesktop.org/series/28586/
State : success

== Summary ==

Series 28586v2 Series without cover letter
https://patchwork.freedesktop.org/api/1.0/series/28586/revisions/2/mbox/

fi-bdw-5557u     total:279  pass:268  dwarn:0   dfail:0   fail:0   skip:11  time:446s
fi-bdw-gvtdvm    total:279  pass:265  dwarn:0   dfail:0   fail:0   skip:14  time:436s
fi-blb-e6850     total:279  pass:224  dwarn:1   dfail:0   fail:0   skip:54  time:356s
fi-bsw-n3050     total:279  pass:243  dwarn:0   dfail:0   fail:0   skip:36  time:553s
fi-bxt-j4205     total:279  pass:260  dwarn:0   dfail:0   fail:0   skip:19  time:514s
fi-byt-j1900     total:279  pass:254  dwarn:1   dfail:0   fail:0   skip:24  time:531s
fi-byt-n2820     total:279  pass:251  dwarn:0   dfail:0   fail:0   skip:28  time:517s
fi-glk-2a        total:279  pass:260  dwarn:0   dfail:0   fail:0   skip:19  time:606s
fi-hsw-4770      total:279  pass:263  dwarn:0   dfail:0   fail:0   skip:16  time:445s
fi-hsw-4770r     total:279  pass:263  dwarn:0   dfail:0   fail:0   skip:16  time:416s
fi-ilk-650       total:279  pass:229  dwarn:0   dfail:0   fail:0   skip:50  time:427s
fi-ivb-3520m     total:279  pass:261  dwarn:0   dfail:0   fail:0   skip:18  time:512s
fi-ivb-3770      total:279  pass:261  dwarn:0   dfail:0   fail:0   skip:18  time:479s
fi-kbl-7500u     total:279  pass:261  dwarn:0   dfail:0   fail:0   skip:18  time:479s
fi-kbl-7560u     total:279  pass:269  dwarn:0   dfail:0   fail:0   skip:10  time:587s
fi-kbl-r         total:279  pass:261  dwarn:0   dfail:0   fail:0   skip:18  time:587s
fi-pnv-d510      total:279  pass:223  dwarn:1   dfail:0   fail:0   skip:55  time:527s
fi-skl-6260u     total:279  pass:269  dwarn:0   dfail:0   fail:0   skip:10  time:464s
fi-skl-6700k     total:279  pass:261  dwarn:0   dfail:0   fail:0   skip:18  time:470s
fi-skl-6770hq    total:279  pass:269  dwarn:0   dfail:0   fail:0   skip:10  time:490s
fi-skl-gvtdvm    total:279  pass:266  dwarn:0   dfail:0   fail:0   skip:13  time:442s
fi-skl-x1585l    total:279  pass:268  dwarn:0   dfail:0   fail:0   skip:11  time:493s
fi-snb-2520m     total:279  pass:251  dwarn:0   dfail:0   fail:0   skip:28  time:559s
fi-snb-2600      total:279  pass:250  dwarn:0   dfail:0   fail:0   skip:29  time:409s

0689b6b1aa3edec5d99f35902c9b38c0e6b701b9 drm-tip: 2017y-08m-11d-18h-55m-01s UTC integration manifest 5474fccc3fc2 drm/i915/cnl: Reuse skl_wm_get_hw_state on Cannonlake.
5dec0693273c drm/i915/gen10: implement gen 10 watermarks calculations

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5386/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx