drm/i915/gen10+: use the SKL code for reading WM latencies
Subsystems (2)
Rodrigo Vivi
maintainerPATCH 1/6 drm/i915/gen10+: use the SKL code for reading WM latencies
From: Paulo Zanoni <[email protected]>
Gen 10 should use the exact same code as Gen 9, so change the check to take this into consideration, and also assume that future platforms will run this code.
Also add a MISSING_CASE(), just in case we do something wrong, instead of silently failing.
--- drivers/gpu/drm/i915/intel_pm.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +4 -2
@@ -2764,7 +2764,7 @@ hsw_compute_linetime_wm(const struct intel_crtc_state *cstate)static void intel_read_wm_latency (struct drm_i915_private *dev_priv,uint16_t wm[8 ]) { -if (IS_GEN9 (dev_priv)) { +if (INTEL_GEN (dev_priv) >=9 ) {uint32_t val;int ret, i;int level, max_level =ilk_wm_max_level (dev_priv);
@@ -2824,7 +2824,7 @@ static void intel_read_wm_latency(struct drm_i915_private *dev_priv, }/* -* WaWmMemoryReadLatency:skl,glk +* WaWmMemoryReadLatency:skl+,glk * * punit doesn't take into account the read latency so we need * to add 2us to the various latency levels we retrieve from the
@@ -2863,6 +2863,8 @@ static void intel_read_wm_latency(struct drm_i915_private *dev_priv, wm[0 ] =7 ; wm[1 ] = (mltr >>MLTR_WM1_SHIFT ) &ILK_SRLT_MASK ; wm[2 ] = (mltr >>MLTR_WM2_SHIFT ) &ILK_SRLT_MASK ; + }else { +MISSING_CASE (INTEL_DEVID (dev_priv)); } }
Signature · 6 lines
2.13.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerPATCH 2/6 drm/i915/cnl: Enable SAGV for Cannonlake.
For now inherit from previous platforms.
v2: Rebase on top of CFL.
--- drivers/gpu/drm/i915/intel_pm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_pm.c +2 -1
@@ -3557,7 +3557,8 @@ static bool skl_needs_memory_bw_wa(struct intel_atomic_state *state)static bool intel_has_sagv (struct drm_i915_private *dev_priv) { -if (IS_KABYLAKE (dev_priv) ||IS_COFFEELAKE (dev_priv)) +if (IS_KABYLAKE (dev_priv) ||IS_COFFEELAKE (dev_priv) || +IS_CANNONLAKE (dev_priv))return true; if (IS_SKYLAKE(dev_priv) &&
Signature · 6 lines
2.13.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerPATCH 3/6 drm/i915/gen10: fix the gen 10 SAGV block time
In reply to Rodrigo ViviFrom: Paulo Zanoni <[email protected]>
A previous commit added CNL to intel_has_sagv(), but forgot to adjust the SAGV block time to gen 10 platforms.
--- drivers/gpu/drm/i915/intel_pm.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +6 -7
@@ -3538,8 +3538,6 @@ bool ilk_disable_lp_wm(struct drm_device *dev)return _ilk_disable_lp_wm (dev_priv,WM_DIRTY_LP_ALL ); } -#define SKL_SAGV_BLOCK_TIME 30/* µs */ -/* * FIXME: We still don't have the proper code detect if we need to apply the WA, * so assume we'll always need it in order to avoid underruns.
@@ -3664,12 +3662,13 @@ bool intel_can_enable_sagv(struct drm_atomic_state *state)struct intel_crtc_state *cstate;enum pipe pipe;int level, latency; +int sagv_block_time_us =IS_GEN9 (dev_priv) ?30 :20 ;if (!intel_has_sagv (dev_priv))return false;/* -* SKL workaround: bspec recommends we disable the SAGV when we have +* SKL+ workaround: bspec recommends we disable the SAGV when we have * more then one pipe enabled * * If there are no active CRTCs, no additional checks need be performed
@@ -3708,11 +3707,11 @@ bool intel_can_enable_sagv(struct drm_atomic_state *state) latency +=15 ;/* -* If any of the planes on this pipe don't enable wm levels -* that incur memory latencies higher then 30µs we can't enable -* the SAGV +* If any of the planes on this pipe don't enable wm levels that +* incur memory latencies higher than sagv_block_time_us we +* can't enable the SAGV. */ -if (latency <SKL_SAGV_BLOCK_TIME ) +if (latency < sagv_block_time_us)return false; }
Signature · 6 lines
2.13.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerPATCH 4/6 drm/i915/gen10: fix WM latency printing
In reply to Rodrigo ViviFrom: Paulo Zanoni <[email protected]>
Gen 10 is just like Gen 9, so let's consider that all the future platforms are going to be like gen 9 instead of being like gen8-.
--- drivers/gpu/drm/i915/intel_pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_pm.c +1 -1
@@ -2920,7 +2920,7 @@ static void intel_print_wm_latency(struct drm_i915_private *dev_priv,* - latencies are in us on gen9. * - before then, WM1+ latency values are in 0.5us units */ -if (IS_GEN9 (dev_priv)) +if (INTEL_GEN (dev_priv) >=9 ) latency *=10 ;else if (level >0 ) latency *=5 ;
Signature · 6 lines
2.13.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerPATCH 5/6 drm/i915/gen10: implement gen 10 watermarks calculations
In reply to Rodrigo ViviFrom: Paulo Zanoni <[email protected]>
They're slightly different than the gen 9 calculations.
v2: Remove TODO comment. Code matches recent spec.
--- drivers/gpu/drm/i915/intel_pm.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +15 -6
@@ -4274,8 +4274,9 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,* should allow pixel_rate up to ~2 GHz which seems sufficient since max * 2xcdclk is 1350 MHz and the pixel rate should never exceed that. */ -static uint_fixed_16_16_t skl_wm_method1 (uint32_t pixel_rate,uint8_t cpp, -uint32_t latency) +static uint_fixed_16_16_t +skl_wm_method1 (const struct drm_i915_private *dev_priv,uint32_t pixel_rate, +uint8_t cpp,uint32_t latency) {uint32_t wm_intermediate_val;uint_fixed_16_16_t ret;
@@ -4285,6 +4286,10 @@ static uint_fixed_16_16_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp, wm_intermediate_val = latency * pixel_rate * cpp; ret =div_fixed16 (wm_intermediate_val,1000 *512 ); + +if (INTEL_GEN (dev_priv) >=10 ) + ret.val +=1 <<16 ; +return ret; }
@@ -4436,11 +4441,15 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv, plane_bytes_per_line = width * cpp;if (y_tiled) { - interm_pbpl =DIV_ROUND_UP (plane_bytes_per_line * - y_min_scanlines,512 ); + interm_pbpl = plane_bytes_per_line * y_min_scanlines; + +if (INTEL_GEN (dev_priv) >=10 ) + interm_pbpl++; + + interm_pbpl =DIV_ROUND_UP (interm_pbpl,512 ); plane_blocks_per_line =div_fixed16 (interm_pbpl, y_min_scanlines); - }else if (x_tiled) { + }else if (x_tiled &&INTEL_GEN (dev_priv) ==9 ) { interm_pbpl =DIV_ROUND_UP (plane_bytes_per_line,512 ); plane_blocks_per_line =u32_to_fixed16 (interm_pbpl); }else {
@@ -4448,7 +4457,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv, plane_blocks_per_line =u32_to_fixed16 (interm_pbpl); } - method1 =skl_wm_method1 (plane_pixel_rate, cpp, latency); + method1 =skl_wm_method1 (dev_priv, plane_pixel_rate, cpp, latency); method2 = skl_wm_method2(plane_pixel_rate, cstate->base.adjusted_mode.crtc_htotal, latency,
Signature · 6 lines
2.13.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 5/6] drm/i915/gen10: implement gen 10 watermarks calculations
Hi,
Quoted 31 lines · Rodrigo Vivi
From: Paulo Zanoni <[email protected]>
They're slightly different than the gen 9 calculations.
v2: Remove TODO comment. Code matches recent spec.
Cc Mahesh Kumar <[email protected]>Cc Maarten Lankhorst <[email protected]>Signed-off-by Paulo Zanoni <[email protected]>Signed-off-by Rodrigo Vivi <[email protected]>--- drivers/gpu/drm/i915/intel_pm.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-)drivers/gpu/drm/i915/intel_pm.c +3
-2@@ -4274,8 +4274,9 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,* should allow pixel_rate up to ~2 GHz which seems sufficient since max * 2xcdclk is 1350 MHz and the pixel rate should never exceed that. */ -static uint_fixed_16_16_t skl_wm_method1 (uint32_t pixel_rate,uint8_t cpp, -uint32_t latency) +static uint_fixed_16_16_t +skl_wm_method1 (const struct drm_i915_private *dev_priv,uint32_t pixel_rate, +uint8_t cpp,uint32_t latency) {uint32_t wm_intermediate_val;uint_fixed_16_16_t ret;
drivers/gpu/drm/i915/intel_pm.c static uint_fixed_16_16_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp, · line 4291
Quoted 6 lines
drivers/gpu/drm/i915/intel_pm.c +3
-0@@ -4285,6 +4286,10 @@ static uint_fixed_16_16_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp, wm_intermediate_val = latency * pixel_rate * cpp; ret =div_fixed16 (wm_intermediate_val,1000 *512 ); + +if (INTEL_GEN (dev_priv) >=10 ) + ret.val +=1 <<16 ;
Please use available fp16.16 wrapper to add
ret = add_fixed16_u32(ret, 1);
Quoted 6 lines
drivers/gpu/drm/i915/intel_pm.c +1
-0+return ret; }@@ -4436,11 +4441,15 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
drivers/gpu/drm/i915/intel_pm.c static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv, · line 4449
Quoted 10 lines
drivers/gpu/drm/i915/intel_pm.c +6
-2plane_bytes_per_line = width * cpp;if (y_tiled) { - interm_pbpl =DIV_ROUND_UP (plane_bytes_per_line * - y_min_scanlines,512 ); + interm_pbpl = plane_bytes_per_line * y_min_scanlines; + +if (INTEL_GEN (dev_priv) >=10 ) + interm_pbpl++; + + interm_pbpl =DIV_ROUND_UP (interm_pbpl,512 );
It looks wrong, my interpretation of Bspec is:
interm_pbpl = DIV_ROUND_UP(plane_bytes_per_line *
y_min_scanlines, 512);
if (INTEL_GEN(dev_priv) >= 10)
interm_pbpl++;-Mahesh
Quoted 8 lines
drivers/gpu/drm/i915/intel_pm.c +1
-1plane_blocks_per_line =div_fixed16 (interm_pbpl, y_min_scanlines); - }else if (x_tiled) { + }else if (x_tiled &&INTEL_GEN (dev_priv) ==9 ) { interm_pbpl =DIV_ROUND_UP (plane_bytes_per_line,512 ); plane_blocks_per_line =u32_to_fixed16 (interm_pbpl); }else {
drivers/gpu/drm/i915/intel_pm.c static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv, · line 4463
Quoted 8 lines
drivers/gpu/drm/i915/intel_pm.c +1
-1@@ -4448,7 +4457,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv, plane_blocks_per_line =u32_to_fixed16 (interm_pbpl); } - method1 =skl_wm_method1 (plane_pixel_rate, cpp, latency); + method1 =skl_wm_method1 (dev_priv, plane_pixel_rate, cpp, latency); method2 = skl_wm_method2(plane_pixel_rate, cstate->base.adjusted_mode.crtc_htotal, latency,
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerPATCH 1/1 drm/i915/gen10: implement gen 10 watermarks calculations
From: Paulo Zanoni <[email protected]>
They're slightly different than the gen 9 calculations.
v2: Remove TODO comment. Code matches recent spec.
v3: Rebase on top of latest skl code using new fp16.16 and
fixing a logic issue. Auto rebase bot has apparently made some bad decisions that changed the logic of the code. (Noticed by Manesh, updated by Rodrigo).
--- drivers/gpu/drm/i915/intel_pm.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +13 -4
@@ -4290,8 +4290,9 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,* should allow pixel_rate up to ~2 GHz which seems sufficient since max * 2xcdclk is 1350 MHz and the pixel rate should never exceed that. */ -static uint_fixed_16_16_t skl_wm_method1 (uint32_t pixel_rate,uint8_t cpp, -uint32_t latency) +static uint_fixed_16_16_t +skl_wm_method1 (const struct drm_i915_private *dev_priv,uint32_t pixel_rate, +uint8_t cpp,uint32_t latency) {uint32_t wm_intermediate_val;uint_fixed_16_16_t ret;
@@ -4301,6 +4302,10 @@ static uint_fixed_16_16_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp, wm_intermediate_val = latency * pixel_rate * cpp; ret =div_fixed16 (wm_intermediate_val,1000 *512 ); + +if (INTEL_GEN (dev_priv) >=10 ) + ret =add_fixed16_u32 (ret,1 ); +return ret; }
@@ -4456,9 +4461,13 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,if (y_tiled) { interm_pbpl =DIV_ROUND_UP (plane_bytes_per_line * y_min_scanlines,512 ); + +if (INTEL_GEN (dev_priv) >=10 ) + interm_pbpl++; + plane_blocks_per_line =div_fixed16 (interm_pbpl, y_min_scanlines); - }else if (x_tiled) { + }else if (x_tiled &&INTEL_GEN (dev_priv) ==9 ) { interm_pbpl =DIV_ROUND_UP (plane_bytes_per_line,512 ); plane_blocks_per_line =u32_to_fixed16 (interm_pbpl); }else {
@@ -4466,7 +4475,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv, plane_blocks_per_line =u32_to_fixed16 (interm_pbpl); } - method1 =skl_wm_method1 (plane_pixel_rate, cpp, latency); + method1 =skl_wm_method1 (dev_priv, plane_pixel_rate, cpp, latency); method2 = skl_wm_method2(plane_pixel_rate, cstate->base.adjusted_mode.crtc_htotal, latency,
Signature · 6 lines
2.13.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH] drm/i915/gen10: implement gen 10 watermarks calculations
patch looks good to me,
Quoted 5 lines · Rodrigo Vivi
comment. Code matches recent spec.
v3: Rebase on top of latest skl code using new fp16.16 and
fixing a logic issue. Auto rebase bot has apparently made some bad decisions that changed the logic of the code. (Noticed by Manesh, updated by Rodrigo).
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH] drm/i915/gen10: implement gen 10 watermarks calculations
this patch and patch 6 merged to dinq. thanks for patch and for the reviews.
Quoted 20 lines · Mahesh Kumar
patch looks good to me,
Reviewed-by Mahesh Kumar <[email protected]>On Saturday 12 August 2017 05:08 AM, Rodrigo Vivi wrote:
comment. Code matches recent spec.
v3: Rebase on top of latest skl code using new fp16.16 and
fixing a logic issue. Auto rebase bot has apparently made some bad decisions that changed the logic of the code. (Noticed by Manesh, updated by Rodrigo)._______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 6 lines
Rodrigo Vivi Blog: http://blog.vivi.eng.br _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerPATCH 6/6 drm/i915/cnl: Reuse skl_wm_get_hw_state on Cannonlake.
In reply to Rodrigo ViviOtherwise it reuses the ilk that has a completely different wm.
--- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_display.c +1 -1
@@ -14702,7 +14702,7 @@ intel_modeset_setup_hw_state(struct drm_device *dev, }else if (IS_VALLEYVIEW (dev_priv) ||IS_CHERRYVIEW (dev_priv)) {vlv_wm_get_hw_state (dev);vlv_wm_sanitize (dev_priv); - }else if (IS_GEN9 (dev_priv)) { + }else if (INTEL_GEN (dev_priv) >=9 ) {skl_wm_get_hw_state (dev); }else if (HAS_PCH_SPLIT (dev_priv)) {ilk_wm_get_hw_state (dev);
Signature · 6 lines
2.13.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 6/6] drm/i915/cnl: Reuse skl_wm_get_hw_state on Cannonlake.
Op 09-08-17 om 22:52 schreef Rodrigo Vivi:
Quoted 16 lines
Otherwise it reuses the ilk that has a completely different wm.
Cc Mahesh Kumar <[email protected]>Cc Maarten Lankhorst <[email protected]>Cc Paulo Zanoni <[email protected]>Signed-off-by Rodrigo Vivi <[email protected]>--- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/gpu/drm/i915/intel_display.c +0
-0
drivers/gpu/drm/i915/intel_display.c intel_modeset_setup_hw_state(struct drm_device *dev, · line 14708
Quoted 8 lines
drivers/gpu/drm/i915/intel_display.c +1
-1@@ -14702,7 +14702,7 @@ intel_modeset_setup_hw_state(struct drm_device *dev, }else if (IS_VALLEYVIEW (dev_priv) ||IS_CHERRYVIEW (dev_priv)) {vlv_wm_get_hw_state (dev);vlv_wm_sanitize (dev_priv); - }else if (IS_GEN9 (dev_priv)) { + }else if (INTEL_GEN (dev_priv) >=9 ) {skl_wm_get_hw_state (dev); }else if (HAS_PCH_SPLIT (dev_priv)) {ilk_wm_get_hw_state (dev);
For patches 1-4 + 6:
I'll have to look closer at patch 5 with spec in hand. :)
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for series starting with [1/6] drm/i915/gen10+: use the SKL code for reading WM latencies
In reply to Rodrigo Vivi== Series Details ==
== Series Details ==
Series: series starting with [1/6] drm/i915/gen10+: use the SKL code for reading WM latencies
URL : https://patchwork.freedesktop.org/series/28586/
State : success
== Summary ==
Series 28586v1 Series without cover letter
https://patchwork.freedesktop.org/api/1.0/series/28586/revisions/1/mbox/
Test gem_exec_flush:
Subgroup basic-batch-kernel-default-uc:
fail -> PASS (fi-snb-2600) fdo#100007fdo#100007 https://bugs.freedesktop.org/show_bug.cgi?id=100007
fi-bdw-5557u total:279 pass:268 dwarn:0 dfail:0 fail:0 skip:11 time:434s fi-bdw-gvtdvm total:279 pass:265 dwarn:0 dfail:0 fail:0 skip:14 time:414s fi-blb-e6850 total:279 pass:224 dwarn:1 dfail:0 fail:0 skip:54 time:356s fi-bsw-n3050 total:279 pass:243 dwarn:0 dfail:0 fail:0 skip:36 time:493s fi-bxt-j4205 total:279 pass:260 dwarn:0 dfail:0 fail:0 skip:19 time:499s fi-byt-j1900 total:279 pass:254 dwarn:1 dfail:0 fail:0 skip:24 time:516s fi-byt-n2820 total:279 pass:250 dwarn:1 dfail:0 fail:0 skip:28 time:514s fi-glk-2a total:279 pass:260 dwarn:0 dfail:0 fail:0 skip:19 time:587s fi-hsw-4770 total:279 pass:263 dwarn:0 dfail:0 fail:0 skip:16 time:428s fi-hsw-4770r total:279 pass:263 dwarn:0 dfail:0 fail:0 skip:16 time:407s fi-ilk-650 total:279 pass:229 dwarn:0 dfail:0 fail:0 skip:50 time:418s fi-ivb-3520m total:279 pass:261 dwarn:0 dfail:0 fail:0 skip:18 time:514s fi-ivb-3770 total:279 pass:261 dwarn:0 dfail:0 fail:0 skip:18 time:476s fi-kbl-7500u total:279 pass:261 dwarn:0 dfail:0 fail:0 skip:18 time:459s fi-kbl-7560u total:279 pass:269 dwarn:0 dfail:0 fail:0 skip:10 time:567s fi-kbl-r total:279 pass:261 dwarn:0 dfail:0 fail:0 skip:18 time:579s fi-pnv-d510 total:279 pass:223 dwarn:1 dfail:0 fail:0 skip:55 time:526s fi-skl-6260u total:279 pass:269 dwarn:0 dfail:0 fail:0 skip:10 time:458s fi-skl-6700k total:279 pass:261 dwarn:0 dfail:0 fail:0 skip:18 time:641s fi-skl-6770hq total:279 pass:269 dwarn:0 dfail:0 fail:0 skip:10 time:471s fi-skl-gvtdvm total:279 pass:266 dwarn:0 dfail:0 fail:0 skip:13 time:428s fi-skl-x1585l total:279 pass:269 dwarn:0 dfail:0 fail:0 skip:10 time:507s fi-snb-2520m total:279 pass:251 dwarn:0 dfail:0 fail:0 skip:28 time:561s fi-snb-2600 total:279 pass:250 dwarn:0 dfail:0 fail:0 skip:29 time:409s
2d0288b5b28c0d67460f0258a41bb4f78b812f29 drm-tip: 2017y-08m-09d-18h-09m-54s UTC integration manifest 07ca54e7a4a6 drm/i915/cnl: Reuse skl_wm_get_hw_state on Cannonlake.268de0460e3d drm/i915/gen10: implement gen 10 watermarks calculations7bcdb9cec9cf drm/i915/gen10: fix WM latency printing86c2a38e1713 drm/i915/gen10: fix the gen 10 SAGV block timee49af26ba154 drm/i915/cnl: Enable SAGV for Cannonlake.8029ad292d01 drm/i915/gen10+: use the SKL code for reading WM latencies
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5359/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for series starting with [1/6] drm/i915/gen10+: use the SKL code for reading WM latencies (rev2)
In reply to Rodrigo Vivi== Series Details ==
== Series Details ==
Series: series starting with [1/6] drm/i915/gen10+: use the SKL code for reading WM latencies (rev2)
URL : https://patchwork.freedesktop.org/series/28586/
State : success
== Summary ==
Series 28586v2 Series without cover letter
https://patchwork.freedesktop.org/api/1.0/series/28586/revisions/2/mbox/
fi-bdw-5557u total:279 pass:268 dwarn:0 dfail:0 fail:0 skip:11 time:446s fi-bdw-gvtdvm total:279 pass:265 dwarn:0 dfail:0 fail:0 skip:14 time:436s fi-blb-e6850 total:279 pass:224 dwarn:1 dfail:0 fail:0 skip:54 time:356s fi-bsw-n3050 total:279 pass:243 dwarn:0 dfail:0 fail:0 skip:36 time:553s fi-bxt-j4205 total:279 pass:260 dwarn:0 dfail:0 fail:0 skip:19 time:514s fi-byt-j1900 total:279 pass:254 dwarn:1 dfail:0 fail:0 skip:24 time:531s fi-byt-n2820 total:279 pass:251 dwarn:0 dfail:0 fail:0 skip:28 time:517s fi-glk-2a total:279 pass:260 dwarn:0 dfail:0 fail:0 skip:19 time:606s fi-hsw-4770 total:279 pass:263 dwarn:0 dfail:0 fail:0 skip:16 time:445s fi-hsw-4770r total:279 pass:263 dwarn:0 dfail:0 fail:0 skip:16 time:416s fi-ilk-650 total:279 pass:229 dwarn:0 dfail:0 fail:0 skip:50 time:427s fi-ivb-3520m total:279 pass:261 dwarn:0 dfail:0 fail:0 skip:18 time:512s fi-ivb-3770 total:279 pass:261 dwarn:0 dfail:0 fail:0 skip:18 time:479s fi-kbl-7500u total:279 pass:261 dwarn:0 dfail:0 fail:0 skip:18 time:479s fi-kbl-7560u total:279 pass:269 dwarn:0 dfail:0 fail:0 skip:10 time:587s fi-kbl-r total:279 pass:261 dwarn:0 dfail:0 fail:0 skip:18 time:587s fi-pnv-d510 total:279 pass:223 dwarn:1 dfail:0 fail:0 skip:55 time:527s fi-skl-6260u total:279 pass:269 dwarn:0 dfail:0 fail:0 skip:10 time:464s fi-skl-6700k total:279 pass:261 dwarn:0 dfail:0 fail:0 skip:18 time:470s fi-skl-6770hq total:279 pass:269 dwarn:0 dfail:0 fail:0 skip:10 time:490s fi-skl-gvtdvm total:279 pass:266 dwarn:0 dfail:0 fail:0 skip:13 time:442s fi-skl-x1585l total:279 pass:268 dwarn:0 dfail:0 fail:0 skip:11 time:493s fi-snb-2520m total:279 pass:251 dwarn:0 dfail:0 fail:0 skip:28 time:559s fi-snb-2600 total:279 pass:250 dwarn:0 dfail:0 fail:0 skip:29 time:409s
0689b6b1aa3edec5d99f35902c9b38c0e6b701b9 drm-tip: 2017y-08m-11d-18h-55m-01s UTC integration manifest 5474fccc3fc2 drm/i915/cnl: Reuse skl_wm_get_hw_state on Cannonlake.5dec0693273c drm/i915/gen10: implement gen 10 watermarks calculations
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5386/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx