ASoC: rt5514: Add devicetree bindings for rt5514-spi
Subsystems (2)
PATCH v9 1/2 ASoC: rt5514: Add devicetree bindings for rt5514-spi
Add devicetree bindings documentation file for rt5514 spi dsp codec.
Also update rt5514 i2c dt-binding's compatible to distinguish it from rt5514 spi.
Signed-off-by Jeffy Chen <[email protected]>
---
Changes in v9:
Address comments from Brian.
.../devicetree/bindings/sound/rt5514-spi.txt | 29 ++++++++++++++++++++++ Documentation/devicetree/bindings/sound/rt5514.txt | 4 +-- 2 files changed, 31 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/rt5514-spi.txt
Documentation/devicetree/bindings/sound/rt5514-spi.txt new file +29 -0
@@ -0,0 +1,29 @@ +RT5514 SPI audio CODEC + +This device supports SPI only. + +Required properties: + +- compatible : "realtek,rt5514" or "realtek,rt5514", "realtek,rt5514-spi". + +- reg : The SPI address of the device. + +Optional properties: + +- interrupt-parent: Should be the phandle for the interrupt controller +- interrupts: The interrupt number to the cpu. The interrupt specifier format + depends on the interrupt controller. + +Example: + +codec: rt5514-spi@0 { + compatible = "realtek,rt5514", "realtek,rt5514-spi"; + reg = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&mic_int>; + + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + wakeup-source; +};
Documentation/devicetree/bindings/sound/rt5514.txt +2 -2
@@ -4,7 +4,7 @@ This device supports I2C only. Required properties: -- compatible : "realtek,rt5514". +- compatible : "realtek,rt5514" or "realtek,rt5514", "realtek,rt5514-i2c". - reg : The I2C address of the device.
@@ -28,6 +28,6 @@ Pins on the device (for linking into audio routes) for RT5514: Example: codec: rt5514@57 { - compatible = "realtek,rt5514"; + compatible = "realtek,rt5514", "realtek,rt5514-i2c"; reg = <0x57>; };
Signature · 1 line
2.11.0