ASoC: rt5514: Add devicetree binding support for rt5514-spi
Subsystems (2)
PATCH v10 1/1 ASoC: rt5514: Add devicetree binding support for rt5514-spi
Add devicetree binding support for rt5514 spi dsp codec.
Also update rt5514 i2c dt-binding's compatible to distinguish it from rt5514 spi.
Signed-off-by Jeffy Chen <[email protected]>
---
Changes in v10:
Put rt5514-i2c doc & rt5514-spi doc together.
Changes in v9:
Address comments from Brian.
Documentation/devicetree/bindings/sound/rt5514.txt | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)
Documentation/devicetree/bindings/sound/rt5514.txt +11 -5
@@ -1,22 +1,28 @@ RT5514 audio CODEC -This device supports I2C only. +This device supports both I2C and SPI. Required properties: -- compatible : "realtek,rt5514". +- compatible : "realtek,rt5514" or "realtek,rt5514", "realtek,rt5514-i2c" for + I2C or "realtek,rt5514", "realtek,rt5514-spi" for SPI. -- reg : The I2C address of the device. +- reg : the I2C address of the device for I2C, the chip select + number for SPI. Optional properties: - clocks: The phandle of the master clock to the CODEC - clock-names: Should be "mclk" +- interrupt-parent: The phandle for the interrupt controller. +- interrupts: The interrupt number to the cpu. The interrupt specifier format + depends on the interrupt controller. + - realtek,dmic-init-delay-ms - Set the DMIC initial delay (ms) to wait it ready. + Set the DMIC initial delay (ms) to wait it ready for I2C. -Pins on the device (for linking into audio routes) for RT5514: +Pins on the device (for linking into audio routes) for I2C: * DMIC1L * DMIC1R
Signature · 1 line
2.11.0