Skip to contentSkip to conversation

Current State of my clk patches

RFC PATCH In review Karol Herbst 2 participants 50 messages Sep 15, 2017 – Oct 8, 2017 21 messages not in the archive

lore
Share & tools
lore
#0 lore raw

cover Current State of my clk patches

Just wanted to post updated versions of my last series/patches. Reviews welcomed.

It would be also nice if we agree on features I should focus upstreaming, so that this work can be better splitted or reordered.

Sadly most of my patches depend on the rather big clk subdev rework and I think those patches shows best, why I think this rework is actually needed and makes things much easier to add later on.

Feature overview:
1- 3: Hwmon fixes on suspended device
4- 8: Clk subdev rework to decouple current and expected clock states
Fix reclocking while suspended
9: Restore clocks on Suspend
10: Fix reclocking while going into suspend
11: Fix reclocking while suspending
12-14: Thermal daemon triggers reclocks on temperature change when needed
includes volt updates and dropping cstates according to the vbios
15-17: Thermal throttling
18: Don't do full reclocks when only parts need to be updated
19-20: Hacky Workaround for enabling Maxwell2 reclocking (hidden behind module parameter) 21-23: debugfs file to change boost mode
24-29: Parse battery vpstate to throttle clocks when system is running on battery

Karol Herbst (29):
therm: split return code and value in nvkm_get_temp
hwmon: properly check for errors
subdev/volt/gk104: return error when read fails
clk: Rename nvkm_pstate_calc to nvkm_clk_update and export it
clk: Remove dstate
clk: Make pstate a pointer to nvkm_pstate
clk: Hold information about the current cstate status
clk: We should pass the pstate id around not the index in the list
clk: Set clocks to pre suspend state after suspend core/device: Move therm behind clk
debugfs: Wake up GPU before doing any reclocking
therm: Don't cancel the timer
therm: Move the temp readout into the alarm
therm: Trigger reclock in temperature daemon
bios: add thermal policies table
clk: parse thermal policies for throttling thresholds
clk: thermal throttling
clk: Only do partial reclocks as required secboot/acr352: reset PMU after secboot
device: enable clk for Maxwell2
clk: Save the max clock we can set
nvif: Add boost info and set operations
debugfs: Add boost interface to change the boost_mode bios/vpstate: there are some fermi vbios with no boost or tdp entry bios/vpstate: parse max battery id
clk: refactor the base and boost clock limits so that we can limit
pstates as well
clk: implement limiting pstates just like we do for cstates
clk: move the switch out of the loop in nvkm_cstate_valid
clk: limit clocks on battery

 drm/nouveau/include/nvif/if0001.h                  |  15 +
 drm/nouveau/include/nvkm/core/device.h             |   2 +-
 .../include/nvkm/subdev/bios/thermal_policies.h    |  27 ++
 drm/nouveau/include/nvkm/subdev/bios/vpstate.h     |   1 +
 drm/nouveau/include/nvkm/subdev/clk.h              |  23 +-
 drm/nouveau/include/nvkm/subdev/therm.h            |   3 +-
 drm/nouveau/nouveau_debugfs.c                      |  90 ++++-
 drm/nouveau/nouveau_hwmon.c                        |  48 ++-
 drm/nouveau/nvkm/engine/device/base.c              |   3 +
 drm/nouveau/nvkm/engine/device/ctrl.c              |  66 +++-
 drm/nouveau/nvkm/subdev/bios/Kbuild                |   1 +
 drm/nouveau/nvkm/subdev/bios/thermal_policies.c    |  81 +++++
 drm/nouveau/nvkm/subdev/bios/vpstate.c             |  13 +-
 drm/nouveau/nvkm/subdev/clk/base.c                 | 375 +++++++++++++++------
 drm/nouveau/nvkm/subdev/clk/gk104.c                |  10 +-
 drm/nouveau/nvkm/subdev/pmu/gk20a.c                |  18 +-
 drm/nouveau/nvkm/subdev/secboot/acr_r352.c         |  13 +
 drm/nouveau/nvkm/subdev/therm/base.c               |  59 ++--
 drm/nouveau/nvkm/subdev/therm/g84.c                |  11 +-
 drm/nouveau/nvkm/subdev/therm/gp100.c              |   9 +-
 drm/nouveau/nvkm/subdev/therm/nv40.c               |   9 +-
 drm/nouveau/nvkm/subdev/therm/nv50.c               |   9 +-
 drm/nouveau/nvkm/subdev/therm/priv.h               |   4 +-
 drm/nouveau/nvkm/subdev/therm/temp.c               |  16 +-
 drm/nouveau/nvkm/subdev/volt/base.c                |   3 +
 drm/nouveau/nvkm/subdev/volt/gk104.c               |   7 +-
 26 files changed, 723 insertions(+), 193 deletions(-)
 create mode 100644 drm/nouveau/include/nvkm/subdev/bios/thermal_policies.h
 create mode 100644 drm/nouveau/nvkm/subdev/bios/thermal_policies.c
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20170915171129.5009-1-karolherbst-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org

#2 lore raw

RFC PATCH 1/29 therm: split return code and value in nvkm_get_temp

The current hwmon code doesn't check if the returned value was actually an error.

Since Kepler temperature sensors are able to report negative values. Since Pascal (and maybe earlier) we have sensors with improved precision.

Adjust the nvkm_get_temp method to be able to deal with those changes and let hwmon return an error properly.

---
 drm/nouveau/include/nvkm/subdev/therm.h |  2 +-
 drm/nouveau/nouveau_hwmon.c             | 15 +++++++++------
 drm/nouveau/nvkm/subdev/therm/base.c    | 19 ++++++++++++++-----
 drm/nouveau/nvkm/subdev/therm/g84.c     | 11 ++++++-----
 drm/nouveau/nvkm/subdev/therm/gp100.c   |  9 +++++----
 drm/nouveau/nvkm/subdev/therm/nv40.c    |  9 +++------
 drm/nouveau/nvkm/subdev/therm/nv50.c    |  9 +++------
 drm/nouveau/nvkm/subdev/therm/priv.h    |  4 ++--
 drm/nouveau/nvkm/subdev/therm/temp.c    | 16 ++++++++++++----
 9 files changed, 55 insertions(+), 39 deletions(-)
drm/nouveau/include/nvkm/subdev/therm.h +1 -1
index 9841f076..8c84017f 100644
@@ -86,7 +86,7 @@ struct nvkm_therm {
 	int (*attr_set)(struct nvkm_therm *, enum nvkm_therm_attr_type, int);
 };
 
-int nvkm_therm_temp_get(struct nvkm_therm *);
+int nvkm_therm_temp_get(struct nvkm_therm *, int *);
 int nvkm_therm_fan_sense(struct nvkm_therm *);
 int nvkm_therm_cstate(struct nvkm_therm *, int, int);
 
drm/nouveau/nouveau_hwmon.c +9 -6
index 7c965648..f1914d9a 100644
@@ -326,8 +326,9 @@ nouveau_temp_is_visible(const void *data, u32 attr, int channel)
 {
 	struct nouveau_drm *drm = nouveau_drm((struct drm_device *)data);
 	struct nvkm_therm *therm = nvxx_therm(&drm->client.device);
+	int val;
 
-	if (therm && therm->attr_get && nvkm_therm_temp_get(therm) < 0)
+	if (therm && therm->attr_get && nvkm_therm_temp_get(therm, &val) < 0)
 		return 0;
 
 	switch (attr) {
@@ -421,15 +422,16 @@ nouveau_temp_read(struct device *dev, u32 attr, int channel, long *val)
 	struct drm_device *drm_dev = dev_get_drvdata(dev);
 	struct nouveau_drm *drm = nouveau_drm(drm_dev);
 	struct nvkm_therm *therm = nvxx_therm(&drm->client.device);
-	int ret;
+	int ret = 0;
+	int temp;
 
 	if (!therm || !therm->attr_get)
 		return -EOPNOTSUPP;
 
 	switch (attr) {
 	case hwmon_temp_input:
-		ret = nvkm_therm_temp_get(therm);
-		*val = ret < 0 ? ret : (ret * 1000);
+		ret = nvkm_therm_temp_get(therm, &temp);
+		*val = temp * 1000;
 		break;
 	case hwmon_temp_max:
 		*val = therm->attr_get(therm, NVKM_THERM_ATTR_THRS_DOWN_CLK)
@@ -459,7 +461,7 @@ nouveau_temp_read(struct device *dev, u32 attr, int channel, long *val)
 		return -EOPNOTSUPP;
 	}
 
-	return 0;
+	return ret;
 }
 
 static int
@@ -713,6 +715,7 @@ nouveau_hwmon_init(struct drm_device *dev)
 	struct device *hwmon_dev;
 	int ret = 0;
 	int i = 0;
+	int val;
 
 	hwmon = drm->hwmon = kzalloc(sizeof(*hwmon), GFP_KERNEL);
 	if (!hwmon)
@@ -720,7 +723,7 @@ nouveau_hwmon_init(struct drm_device *dev)
 	hwmon->dev = dev;
 
 	if (therm && therm->attr_get && therm->attr_set) {
-		if (nvkm_therm_temp_get(therm) >= 0)
+		if (nvkm_therm_temp_get(therm, &val) >= 0)
 			special_groups[i++] = &temp1_auto_point_sensor_group;
 		if (therm->fan_get && therm->fan_get(therm) >= 0)
 			special_groups[i++] = &pwm_fan_sensor_group;
drm/nouveau/nvkm/subdev/therm/base.c +14 -5
index f27fc6d0..8fa691fb 100644
@@ -24,22 +24,26 @@
 #include "priv.h"
 
 int
-nvkm_therm_temp_get(struct nvkm_therm *therm)
+nvkm_therm_temp_get(struct nvkm_therm *therm, int *val)
 {
 	if (therm->func->temp_get)
-		return therm->func->temp_get(therm);
+		return therm->func->temp_get(therm, val);
 	return -ENODEV;
 }
 
 static int
 nvkm_therm_update_trip(struct nvkm_therm *therm)
 {
+	int temp, ret;
 	struct nvbios_therm_trip_point *trip = therm->fan->bios.trip,
 				       *cur_trip = NULL,
 				       *last_trip = therm->last_trip;
-	u8  temp = therm->func->temp_get(therm);
 	u16 duty, i;
 
+	ret = therm->func->temp_get(therm, &temp);
+	if (ret < 0)
+		return ret;
+
 	/* look for the trip point corresponding to the current temperature */
 	cur_trip = NULL;
 	for (i = 0; i < therm->fan->bios.nr_fan_trip; i++) {
@@ -67,9 +71,13 @@ static int
 nvkm_therm_compute_linear_duty(struct nvkm_therm *therm, u8 linear_min_temp,
                                u8 linear_max_temp)
 {
-	u8  temp = therm->func->temp_get(therm);
+	int temp, ret;
 	u16 duty;
 
+	ret = therm->func->temp_get(therm, &temp);
+	if (ret < 0)
+		return ret;
+
 	/* handle the non-linear part first */
 	if (temp < linear_min_temp)
 		return therm->fan->bios.min_duty;
@@ -182,6 +190,7 @@ nvkm_therm_fan_mode(struct nvkm_therm *therm, int mode)
 {
 	struct nvkm_subdev *subdev = &therm->subdev;
 	struct nvkm_device *device = subdev->device;
+	int val;
 	static const char *name[] = {
 		"disabled",
 		"manual",
@@ -197,7 +206,7 @@ nvkm_therm_fan_mode(struct nvkm_therm *therm, int mode)
 	/* do not allow automatic fan management if the thermal sensor is
 	 * not available */
 	if (mode == NVKM_THERM_CTRL_AUTO &&
-	    therm->func->temp_get(therm) < 0)
+	    therm->func->temp_get(therm, &val) < 0)
 		return -EINVAL;
 
 	if (therm->mode == mode)
drm/nouveau/nvkm/subdev/therm/g84.c +6 -5
index 96f8da40..3bb2d829 100644
@@ -27,14 +27,15 @@
 #include <subdev/fuse.h>
 
 int
-g84_temp_get(struct nvkm_therm *therm)
+g84_temp_get(struct nvkm_therm *therm, int *val)
 {
 	struct nvkm_device *device = therm->subdev.device;
 
-	if (nvkm_fuse_read(device->fuse, 0x1a8) == 1)
-		return nvkm_rd32(device, 0x20400);
-	else
+	if (nvkm_fuse_read(device->fuse, 0x1a8) != 1)
 		return -ENODEV;
+
+	*val = nvkm_rd32(device, 0x20400);
+	return 0;
 }
 
 void
@@ -115,7 +116,7 @@ g84_therm_threshold_hyst_emulation(struct nvkm_therm *therm,
 	}
 
 	/* fix the state (in case someone reprogrammed the alarms) */
-	cur = therm->func->temp_get(therm);
+	therm->func->temp_get(therm, &cur);
 	if (new_state == NVKM_THERM_THRS_LOWER && cur > thrs->temp)
 		new_state = NVKM_THERM_THRS_HIGHER;
 	else if (new_state == NVKM_THERM_THRS_HIGHER &&
drm/nouveau/nvkm/subdev/therm/gp100.c +5 -4
index 9f0dea3f..d8206748 100644
@@ -24,7 +24,7 @@
 #include "priv.h"
 
 static int
-gp100_temp_get(struct nvkm_therm *therm)
+gp100_temp_get(struct nvkm_therm *therm, int *val)
 {
 	struct nvkm_device *device = therm->subdev.device;
 	struct nvkm_subdev *subdev = &therm->subdev;
@@ -36,9 +36,10 @@ gp100_temp_get(struct nvkm_therm *therm)
 		nvkm_trace(subdev, "reading temperature from SHADOWed sensor\n");
 
 	/* device valid */
-	if (tsensor & 0x20000000)
-		return (inttemp >> 8);
-	else
+	if (tsensor & 0x20000000) {
+		*val = inttemp >> 8;
+		return 0;
+	} else
 		return -ENODEV;
 }
 
drm/nouveau/nvkm/subdev/therm/nv40.c +3 -6
index 2c92ffb5..cfd5b215 100644
@@ -70,7 +70,7 @@ nv40_sensor_setup(struct nvkm_therm *therm)
 }
 
 static int
-nv40_temp_get(struct nvkm_therm *therm)
+nv40_temp_get(struct nvkm_therm *therm, int *val)
 {
 	struct nvkm_device *device = therm->subdev.device;
 	struct nvbios_therm_sensor *sensor = &therm->bios_sensor;
@@ -95,11 +95,8 @@ nv40_temp_get(struct nvkm_therm *therm)
 	core_temp = core_temp + sensor->offset_num / sensor->offset_den;
 	core_temp = core_temp + sensor->offset_constant - 8;
 
-	/* reserve negative temperatures for errors */
-	if (core_temp < 0)
-		core_temp = 0;
-
-	return core_temp;
+	*val = core_temp;
+	return 0;
 }
 
 static int
drm/nouveau/nvkm/subdev/therm/nv50.c +3 -6
index 9b57b433..62ec4063 100644
@@ -126,7 +126,7 @@ nv50_sensor_setup(struct nvkm_therm *therm)
 }
 
 static int
-nv50_temp_get(struct nvkm_therm *therm)
+nv50_temp_get(struct nvkm_therm *therm, int *val)
 {
 	struct nvkm_device *device = therm->subdev.device;
 	struct nvbios_therm_sensor *sensor = &therm->bios_sensor;
@@ -143,11 +143,8 @@ nv50_temp_get(struct nvkm_therm *therm)
 	core_temp = core_temp + sensor->offset_num / sensor->offset_den;
 	core_temp = core_temp + sensor->offset_constant - 8;
 
-	/* reserve negative temperatures for errors */
-	if (core_temp < 0)
-		core_temp = 0;
-
-	return core_temp;
+	*val = core_temp;
+	return 0;
 }
 
 static void
drm/nouveau/nvkm/subdev/therm/priv.h +2 -2
index 1f46e371..b325ec5f 100644
@@ -91,7 +91,7 @@ struct nvkm_therm_func {
 	int (*pwm_set)(struct nvkm_therm *, int line, u32, u32);
 	int (*pwm_clock)(struct nvkm_therm *, int line);
 
-	int (*temp_get)(struct nvkm_therm *);
+	int (*temp_get)(struct nvkm_therm *, int *);
 
 	int (*fan_sense)(struct nvkm_therm *);
 
@@ -105,7 +105,7 @@ int  nv50_fan_pwm_get(struct nvkm_therm *, int, u32 *, u32 *);
 int  nv50_fan_pwm_set(struct nvkm_therm *, int, u32, u32);
 int  nv50_fan_pwm_clock(struct nvkm_therm *, int);
 
-int  g84_temp_get(struct nvkm_therm *);
+int  g84_temp_get(struct nvkm_therm *, int *);
 void g84_sensor_setup(struct nvkm_therm *);
 void g84_therm_fini(struct nvkm_therm *);
 
drm/nouveau/nvkm/subdev/therm/temp.c +12 -4
index ddb2b2c6..5ec2dfb3 100644
@@ -86,7 +86,10 @@ nvkm_therm_sensor_event(struct nvkm_therm *therm, enum nvkm_therm_thrs thrs,
 	static const char * const thresholds[] = {
 		"fanboost", "downclock", "critical", "shutdown"
 	};
-	int temperature = therm->func->temp_get(therm);
+	int temperature;
+
+	if (therm->func->temp_get(therm, &temperature) < 0)
+		return;
 
 	if (thrs < 0 || thrs > 3)
 		return;
@@ -140,7 +143,10 @@ nvkm_therm_threshold_hyst_polling(struct nvkm_therm *therm,
 {
 	enum nvkm_therm_thrs_direction direction;
 	enum nvkm_therm_thrs_state prev_state, new_state;
-	int temp = therm->func->temp_get(therm);
+	int temp;
+
+	if (therm->func->temp_get(therm, &temp) < 0)
+		return;
 
 	prev_state = nvkm_therm_sensor_get_threshold_state(therm, thrs_name);
 
@@ -166,6 +172,7 @@ alarm_timer_callback(struct nvkm_alarm *alarm)
 	struct nvbios_therm_sensor *sensor = &therm->bios_sensor;
 	struct nvkm_timer *tmr = therm->subdev.device->timer;
 	unsigned long flags;
+	int val;
 
 	spin_lock_irqsave(&therm->sensor.alarm_program_lock, flags);
 
@@ -185,7 +192,7 @@ alarm_timer_callback(struct nvkm_alarm *alarm)
 	spin_unlock_irqrestore(&therm->sensor.alarm_program_lock, flags);
 
 	/* schedule the next poll in one second */
-	if (therm->func->temp_get(therm) >= 0)
+	if (therm->func->temp_get(therm, &val) >= 0)
 		nvkm_timer_alarm(tmr, 1000000000ULL, alarm);
 }
 
@@ -227,9 +234,10 @@ nvkm_therm_sensor_fini(struct nvkm_therm *therm, bool suspend)
 void
 nvkm_therm_sensor_preinit(struct nvkm_therm *therm)
 {
+	int val;
 	const char *sensor_avail = "yes";
 
-	if (therm->func->temp_get(therm) < 0)
+	if (therm->func->temp_get(therm, &val) < 0)
 		sensor_avail = "no";
 
 	nvkm_debug(&therm->subdev, "internal sensor: %s\n", sensor_avail);
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20170915171129.5009-2-karolherbst-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org

#4 lore raw

Re: [RFC PATCH 01/29] therm: split return code and value in nvkm_get_temp

As you changed the return value of temp_get() to solely be the error code, or absence of an error, I would change all those tests that checked whether the returned value was strictly less, or greater than, 0 to now only compare against 0 (no error). For example,

  if (therm && therm->attr_get && nvkm_therm_temp_get(therm, &val) < 0)
  if (therm->func->temp_get(therm, &val) >= 0)

could become

  if (therm && therm->attr_get && nvkm_therm_temp_get(therm, &val))
  if (!therm->func->temp_get(therm, &val))

to match other error checking code.

More comments below

Quoted 4 lines · Karol Herbst

The current hwmon code doesn't check if the returned value was actually an error.

Since Kepler temperature sensors are able to report negative values.

I assume those negative values are not for error reporting, but more if you buried your GPU in the snow somewhere in the Antarctic and still want a valid temperature to be reported.

Quoted 168 lines

Since Pascal (and maybe earlier) we have sensors with improved precision.

Adjust the nvkm_get_temp method to be able to deal with those changes and let hwmon return an error properly.

---
 drm/nouveau/include/nvkm/subdev/therm.h |  2 +-
 drm/nouveau/nouveau_hwmon.c             | 15 +++++++++------
 drm/nouveau/nvkm/subdev/therm/base.c    | 19 ++++++++++++++-----
 drm/nouveau/nvkm/subdev/therm/g84.c     | 11 ++++++-----
 drm/nouveau/nvkm/subdev/therm/gp100.c   |  9 +++++----
 drm/nouveau/nvkm/subdev/therm/nv40.c    |  9 +++------
 drm/nouveau/nvkm/subdev/therm/nv50.c    |  9 +++------
 drm/nouveau/nvkm/subdev/therm/priv.h    |  4 ++--
 drm/nouveau/nvkm/subdev/therm/temp.c    | 16 ++++++++++++----
 9 files changed, 55 insertions(+), 39 deletions(-)
drm/nouveau/include/nvkm/subdev/therm.h +1 -1
index 9841f076..8c84017f 100644
@@ -86,7 +86,7 @@ struct nvkm_therm {
 	int (*attr_set)(struct nvkm_therm *, enum nvkm_therm_attr_type, int);
 };
 
-int nvkm_therm_temp_get(struct nvkm_therm *);
+int nvkm_therm_temp_get(struct nvkm_therm *, int *);
 int nvkm_therm_fan_sense(struct nvkm_therm *);
 int nvkm_therm_cstate(struct nvkm_therm *, int, int);
 
drm/nouveau/nouveau_hwmon.c +9 -6
index 7c965648..f1914d9a 100644
@@ -326,8 +326,9 @@ nouveau_temp_is_visible(const void *data, u32 attr, int channel)
 {
 	struct nouveau_drm *drm = nouveau_drm((struct drm_device *)data);
 	struct nvkm_therm *therm = nvxx_therm(&drm->client.device);
+	int val;
 
-	if (therm && therm->attr_get && nvkm_therm_temp_get(therm) < 0)
+	if (therm && therm->attr_get && nvkm_therm_temp_get(therm, &val) < 0)
 		return 0;
 
 	switch (attr) {
@@ -421,15 +422,16 @@ nouveau_temp_read(struct device *dev, u32 attr, int channel, long *val)
 	struct drm_device *drm_dev = dev_get_drvdata(dev);
 	struct nouveau_drm *drm = nouveau_drm(drm_dev);
 	struct nvkm_therm *therm = nvxx_therm(&drm->client.device);
-	int ret;
+	int ret = 0;
+	int temp;
 
 	if (!therm || !therm->attr_get)
 		return -EOPNOTSUPP;
 
 	switch (attr) {
 	case hwmon_temp_input:
-		ret = nvkm_therm_temp_get(therm);
-		*val = ret < 0 ? ret : (ret * 1000);
+		ret = nvkm_therm_temp_get(therm, &temp);
+		*val = temp * 1000;
 		break;
 	case hwmon_temp_max:
 		*val = therm->attr_get(therm, NVKM_THERM_ATTR_THRS_DOWN_CLK)
@@ -459,7 +461,7 @@ nouveau_temp_read(struct device *dev, u32 attr, int channel, long *val)
 		return -EOPNOTSUPP;
 	}
 
-	return 0;
+	return ret;
 }
 
 static int
@@ -713,6 +715,7 @@ nouveau_hwmon_init(struct drm_device *dev)
 	struct device *hwmon_dev;
 	int ret = 0;
 	int i = 0;
+	int val;
 
 	hwmon = drm->hwmon = kzalloc(sizeof(*hwmon), GFP_KERNEL);
 	if (!hwmon)
@@ -720,7 +723,7 @@ nouveau_hwmon_init(struct drm_device *dev)
 	hwmon->dev = dev;
 
 	if (therm && therm->attr_get && therm->attr_set) {
-		if (nvkm_therm_temp_get(therm) >= 0)
+		if (nvkm_therm_temp_get(therm, &val) >= 0)
 			special_groups[i++] = &temp1_auto_point_sensor_group;
 		if (therm->fan_get && therm->fan_get(therm) >= 0)
 			special_groups[i++] = &pwm_fan_sensor_group;
drm/nouveau/nvkm/subdev/therm/base.c +14 -5
index f27fc6d0..8fa691fb 100644
@@ -24,22 +24,26 @@
 #include "priv.h"
 
 int
-nvkm_therm_temp_get(struct nvkm_therm *therm)
+nvkm_therm_temp_get(struct nvkm_therm *therm, int *val)
 {
 	if (therm->func->temp_get)
-		return therm->func->temp_get(therm);
+		return therm->func->temp_get(therm, val);
 	return -ENODEV;
 }
 
 static int
 nvkm_therm_update_trip(struct nvkm_therm *therm)
 {
+	int temp, ret;
 	struct nvbios_therm_trip_point *trip = therm->fan->bios.trip,
 				       *cur_trip = NULL,
 				       *last_trip = therm->last_trip;
-	u8  temp = therm->func->temp_get(therm);
 	u16 duty, i;
 
+	ret = therm->func->temp_get(therm, &temp);
+	if (ret < 0)
+		return ret;
+
 	/* look for the trip point corresponding to the current temperature */
 	cur_trip = NULL;
 	for (i = 0; i < therm->fan->bios.nr_fan_trip; i++) {
@@ -67,9 +71,13 @@ static int
 nvkm_therm_compute_linear_duty(struct nvkm_therm *therm, u8 linear_min_temp,
                                u8 linear_max_temp)
 {
-	u8  temp = therm->func->temp_get(therm);
+	int temp, ret;
 	u16 duty;
 
+	ret = therm->func->temp_get(therm, &temp);
+	if (ret < 0)
+		return ret;
+
 	/* handle the non-linear part first */
 	if (temp < linear_min_temp)
 		return therm->fan->bios.min_duty;
@@ -182,6 +190,7 @@ nvkm_therm_fan_mode(struct nvkm_therm *therm, int mode)
 {
 	struct nvkm_subdev *subdev = &therm->subdev;
 	struct nvkm_device *device = subdev->device;
+	int val;
 	static const char *name[] = {
 		"disabled",
 		"manual",
@@ -197,7 +206,7 @@ nvkm_therm_fan_mode(struct nvkm_therm *therm, int mode)
 	/* do not allow automatic fan management if the thermal sensor is
 	 * not available */
 	if (mode == NVKM_THERM_CTRL_AUTO &&
-	    therm->func->temp_get(therm) < 0)
+	    therm->func->temp_get(therm, &val) < 0)
 		return -EINVAL;
 
 	if (therm->mode == mode)
drm/nouveau/nvkm/subdev/therm/g84.c +1 -1
index 96f8da40..3bb2d829 100644
@@ -27,14 +27,15 @@
 #include <subdev/fuse.h>
 
 int
-g84_temp_get(struct nvkm_therm *therm)
+g84_temp_get(struct nvkm_therm *therm, int *val)

drm/nouveau/nvkm/subdev/therm/g84.c line 37

Quoted 10 lines
drm/nouveau/nvkm/subdev/therm/g84.c +3 -3
 {
 	struct nvkm_device *device = therm->subdev.device;
 
-	if (nvkm_fuse_read(device->fuse, 0x1a8) == 1)
-		return nvkm_rd32(device, 0x20400);
-	else
+	if (nvkm_fuse_read(device->fuse, 0x1a8) != 1)
 		return -ENODEV;
+
+	*val = nvkm_rd32(device, 0x20400);

You could allow passing NULL values for val for when you are not interested by the results, as you did in some places further up.
I would probably check for NULL values for val, and for therm though it seems to be an implicit rule that the caller should be the one doing the check.

drm/nouveau/nvkm/subdev/therm/g84.c g84_therm_threshold_hyst_emulation(struct nvkm_therm *therm, · line 119

Quoted 10 lines
drm/nouveau/nvkm/subdev/therm/g84.c +2 -1
+	return 0;
 }
 
 void
@@ -115,7 +116,7 @@ g84_therm_threshold_hyst_emulation(struct nvkm_therm *therm,
 	}
 
 	/* fix the state (in case someone reprogrammed the alarms) */
-	cur = therm->func->temp_get(therm);
+	therm->func->temp_get(therm, &cur);

Should there be a check for the return value of the temp_get() function here, and error out if an error code was returned? In any case, you are the behaviour here, as if temp_get() previously returned an error code, the if-statement would always be false, whereas now, it’s undecided as cur will not even be initialised in that case!

I am not sure whether it should be the caller of temp_get() or temp_get() itself which should initialise a default value for the val argument (probably the latter).

Quoted 170 lines
drm/nouveau/nvkm/subdev/therm/g84.c +0 -0
 	if (new_state == NVKM_THERM_THRS_LOWER && cur > thrs->temp)
 		new_state = NVKM_THERM_THRS_HIGHER;
 	else if (new_state == NVKM_THERM_THRS_HIGHER &&
drm/nouveau/nvkm/subdev/therm/gp100.c +5 -4
index 9f0dea3f..d8206748 100644
@@ -24,7 +24,7 @@
 #include "priv.h"
 
 static int
-gp100_temp_get(struct nvkm_therm *therm)
+gp100_temp_get(struct nvkm_therm *therm, int *val)
 {
 	struct nvkm_device *device = therm->subdev.device;
 	struct nvkm_subdev *subdev = &therm->subdev;
@@ -36,9 +36,10 @@ gp100_temp_get(struct nvkm_therm *therm)
 		nvkm_trace(subdev, "reading temperature from SHADOWed sensor\n");
 
 	/* device valid */
-	if (tsensor & 0x20000000)
-		return (inttemp >> 8);
-	else
+	if (tsensor & 0x20000000) {
+		*val = inttemp >> 8;
+		return 0;
+	} else
 		return -ENODEV;
 }
 
drm/nouveau/nvkm/subdev/therm/nv40.c +3 -6
index 2c92ffb5..cfd5b215 100644
@@ -70,7 +70,7 @@ nv40_sensor_setup(struct nvkm_therm *therm)
 }
 
 static int
-nv40_temp_get(struct nvkm_therm *therm)
+nv40_temp_get(struct nvkm_therm *therm, int *val)
 {
 	struct nvkm_device *device = therm->subdev.device;
 	struct nvbios_therm_sensor *sensor = &therm->bios_sensor;
@@ -95,11 +95,8 @@ nv40_temp_get(struct nvkm_therm *therm)
 	core_temp = core_temp + sensor->offset_num / sensor->offset_den;
 	core_temp = core_temp + sensor->offset_constant - 8;
 
-	/* reserve negative temperatures for errors */
-	if (core_temp < 0)
-		core_temp = 0;
-
-	return core_temp;
+	*val = core_temp;
+	return 0;
 }
 
 static int
drm/nouveau/nvkm/subdev/therm/nv50.c +3 -6
index 9b57b433..62ec4063 100644
@@ -126,7 +126,7 @@ nv50_sensor_setup(struct nvkm_therm *therm)
 }
 
 static int
-nv50_temp_get(struct nvkm_therm *therm)
+nv50_temp_get(struct nvkm_therm *therm, int *val)
 {
 	struct nvkm_device *device = therm->subdev.device;
 	struct nvbios_therm_sensor *sensor = &therm->bios_sensor;
@@ -143,11 +143,8 @@ nv50_temp_get(struct nvkm_therm *therm)
 	core_temp = core_temp + sensor->offset_num / sensor->offset_den;
 	core_temp = core_temp + sensor->offset_constant - 8;
 
-	/* reserve negative temperatures for errors */
-	if (core_temp < 0)
-		core_temp = 0;
-
-	return core_temp;
+	*val = core_temp;
+	return 0;
 }
 
 static void
drm/nouveau/nvkm/subdev/therm/priv.h +2 -2
index 1f46e371..b325ec5f 100644
@@ -91,7 +91,7 @@ struct nvkm_therm_func {
 	int (*pwm_set)(struct nvkm_therm *, int line, u32, u32);
 	int (*pwm_clock)(struct nvkm_therm *, int line);
 
-	int (*temp_get)(struct nvkm_therm *);
+	int (*temp_get)(struct nvkm_therm *, int *);
 
 	int (*fan_sense)(struct nvkm_therm *);
 
@@ -105,7 +105,7 @@ int  nv50_fan_pwm_get(struct nvkm_therm *, int, u32 *, u32 *);
 int  nv50_fan_pwm_set(struct nvkm_therm *, int, u32, u32);
 int  nv50_fan_pwm_clock(struct nvkm_therm *, int);
 
-int  g84_temp_get(struct nvkm_therm *);
+int  g84_temp_get(struct nvkm_therm *, int *);
 void g84_sensor_setup(struct nvkm_therm *);
 void g84_therm_fini(struct nvkm_therm *);
 
drm/nouveau/nvkm/subdev/therm/temp.c +12 -4
index ddb2b2c6..5ec2dfb3 100644
@@ -86,7 +86,10 @@ nvkm_therm_sensor_event(struct nvkm_therm *therm, enum nvkm_therm_thrs thrs,
 	static const char * const thresholds[] = {
 		"fanboost", "downclock", "critical", "shutdown"
 	};
-	int temperature = therm->func->temp_get(therm);
+	int temperature;
+
+	if (therm->func->temp_get(therm, &temperature) < 0)
+		return;
 
 	if (thrs < 0 || thrs > 3)
 		return;
@@ -140,7 +143,10 @@ nvkm_therm_threshold_hyst_polling(struct nvkm_therm *therm,
 {
 	enum nvkm_therm_thrs_direction direction;
 	enum nvkm_therm_thrs_state prev_state, new_state;
-	int temp = therm->func->temp_get(therm);
+	int temp;
+
+	if (therm->func->temp_get(therm, &temp) < 0)
+		return;
 
 	prev_state = nvkm_therm_sensor_get_threshold_state(therm, thrs_name);
 
@@ -166,6 +172,7 @@ alarm_timer_callback(struct nvkm_alarm *alarm)
 	struct nvbios_therm_sensor *sensor = &therm->bios_sensor;
 	struct nvkm_timer *tmr = therm->subdev.device->timer;
 	unsigned long flags;
+	int val;
 
 	spin_lock_irqsave(&therm->sensor.alarm_program_lock, flags);
 
@@ -185,7 +192,7 @@ alarm_timer_callback(struct nvkm_alarm *alarm)
 	spin_unlock_irqrestore(&therm->sensor.alarm_program_lock, flags);
 
 	/* schedule the next poll in one second */
-	if (therm->func->temp_get(therm) >= 0)
+	if (therm->func->temp_get(therm, &val) >= 0)
 		nvkm_timer_alarm(tmr, 1000000000ULL, alarm);
 }
 
@@ -227,9 +234,10 @@ nvkm_therm_sensor_fini(struct nvkm_therm *therm, bool suspend)
 void
 nvkm_therm_sensor_preinit(struct nvkm_therm *therm)
 {
+	int val;
 	const char *sensor_avail = "yes";
 
-	if (therm->func->temp_get(therm) < 0)
+	if (therm->func->temp_get(therm, &val) < 0)
 		sensor_avail = "no";
 
 	nvkm_debug(&therm->subdev, "internal sensor: %s\n", sensor_avail);
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20171008101602.oyskycfk3hxditfv-WLoDKDh+7sdAfugRpC6u6w@public.gmane.org

#6 lore raw

Re: [RFC PATCH 01/29] therm: split return code and value in nvkm_get_temp

Quoted 5 lines · Pierre Moreau

As you changed the return value of temp_get() to solely be the error code, or absence of an error, I would change all those tests that checked whether the returned value was strictly less, or greater than, 0 to now only compare against 0 (no error). For example,

Quoted 8 lines
  if (therm && therm->attr_get && nvkm_therm_temp_get(therm, &val) < 0)
  if (therm->func->temp_get(therm, &val) >= 0)

could become

  if (therm && therm->attr_get && nvkm_therm_temp_get(therm, &val))
  if (!therm->func->temp_get(therm, &val))

right, makes sense.

Quoted 5 lines

to match other error checking code.

More comments below

On 2017-09-15 — 17:11, Karol Herbst wrote:

Quoted 8 lines
Quoted 4 lines

The current hwmon code doesn't check if the returned value was actually an error.

Since Kepler temperature sensors are able to report negative values.

I assume those negative values are not for error reporting, but more if you buried your GPU in the snow somewhere in the Antarctic and still want a valid temperature to be reported.

well, nobody ever tested that, but at least on Kepler technically we have two new registers related to therm, one offset and one value. If the offset is 0x60, value needs to be substracted by that offset to get the real temperature. No idea if that works for real though, but why would they add it anyhow if not?

Quoted 172 lines
Quoted 172 lines

Since Pascal (and maybe earlier) we have sensors with improved precision.

Adjust the nvkm_get_temp method to be able to deal with those changes and let hwmon return an error properly.

---
 drm/nouveau/include/nvkm/subdev/therm.h |  2 +-
 drm/nouveau/nouveau_hwmon.c             | 15 +++++++++------
 drm/nouveau/nvkm/subdev/therm/base.c    | 19 ++++++++++++++-----
 drm/nouveau/nvkm/subdev/therm/g84.c     | 11 ++++++-----
 drm/nouveau/nvkm/subdev/therm/gp100.c   |  9 +++++----
 drm/nouveau/nvkm/subdev/therm/nv40.c    |  9 +++------
 drm/nouveau/nvkm/subdev/therm/nv50.c    |  9 +++------
 drm/nouveau/nvkm/subdev/therm/priv.h    |  4 ++--
 drm/nouveau/nvkm/subdev/therm/temp.c    | 16 ++++++++++++----
 9 files changed, 55 insertions(+), 39 deletions(-)
drm/nouveau/include/nvkm/subdev/therm.h +1 -1
index 9841f076..8c84017f 100644
@@ -86,7 +86,7 @@ struct nvkm_therm {
      int (*attr_set)(struct nvkm_therm *, enum nvkm_therm_attr_type, int);
 };
 
-int nvkm_therm_temp_get(struct nvkm_therm *);
+int nvkm_therm_temp_get(struct nvkm_therm *, int *);
 int nvkm_therm_fan_sense(struct nvkm_therm *);
 int nvkm_therm_cstate(struct nvkm_therm *, int, int);
 
drm/nouveau/nouveau_hwmon.c +9 -6
index 7c965648..f1914d9a 100644
@@ -326,8 +326,9 @@ nouveau_temp_is_visible(const void *data, u32 attr, int channel)
 {
      struct nouveau_drm *drm = nouveau_drm((struct drm_device *)data);
      struct nvkm_therm *therm = nvxx_therm(&drm->client.device);
+     int val;
 
-     if (therm && therm->attr_get && nvkm_therm_temp_get(therm) < 0)
+     if (therm && therm->attr_get && nvkm_therm_temp_get(therm, &val) < 0)
              return 0;
 
      switch (attr) {
@@ -421,15 +422,16 @@ nouveau_temp_read(struct device *dev, u32 attr, int channel, long *val)
      struct drm_device *drm_dev = dev_get_drvdata(dev);
      struct nouveau_drm *drm = nouveau_drm(drm_dev);
      struct nvkm_therm *therm = nvxx_therm(&drm->client.device);
-     int ret;
+     int ret = 0;
+     int temp;
 
      if (!therm || !therm->attr_get)
              return -EOPNOTSUPP;
 
      switch (attr) {
      case hwmon_temp_input:
-             ret = nvkm_therm_temp_get(therm);
-             *val = ret < 0 ? ret : (ret * 1000);
+             ret = nvkm_therm_temp_get(therm, &temp);
+             *val = temp * 1000;
              break;
      case hwmon_temp_max:
              *val = therm->attr_get(therm, NVKM_THERM_ATTR_THRS_DOWN_CLK)
@@ -459,7 +461,7 @@ nouveau_temp_read(struct device *dev, u32 attr, int channel, long *val)
              return -EOPNOTSUPP;
      }
 
-     return 0;
+     return ret;
 }
 
 static int
@@ -713,6 +715,7 @@ nouveau_hwmon_init(struct drm_device *dev)
      struct device *hwmon_dev;
      int ret = 0;
      int i = 0;
+     int val;
 
      hwmon = drm->hwmon = kzalloc(sizeof(*hwmon), GFP_KERNEL);
      if (!hwmon)
@@ -720,7 +723,7 @@ nouveau_hwmon_init(struct drm_device *dev)
      hwmon->dev = dev;
 
      if (therm && therm->attr_get && therm->attr_set) {
-             if (nvkm_therm_temp_get(therm) >= 0)
+             if (nvkm_therm_temp_get(therm, &val) >= 0)
                      special_groups[i++] = &temp1_auto_point_sensor_group;
              if (therm->fan_get && therm->fan_get(therm) >= 0)
                      special_groups[i++] = &pwm_fan_sensor_group;
drm/nouveau/nvkm/subdev/therm/base.c +14 -5
index f27fc6d0..8fa691fb 100644
@@ -24,22 +24,26 @@
 #include "priv.h"
 
 int
-nvkm_therm_temp_get(struct nvkm_therm *therm)
+nvkm_therm_temp_get(struct nvkm_therm *therm, int *val)
 {
      if (therm->func->temp_get)
-             return therm->func->temp_get(therm);
+             return therm->func->temp_get(therm, val);
      return -ENODEV;
 }
 
 static int
 nvkm_therm_update_trip(struct nvkm_therm *therm)
 {
+     int temp, ret;
      struct nvbios_therm_trip_point *trip = therm->fan->bios.trip,
                                     *cur_trip = NULL,
                                     *last_trip = therm->last_trip;
-     u8  temp = therm->func->temp_get(therm);
      u16 duty, i;
 
+     ret = therm->func->temp_get(therm, &temp);
+     if (ret < 0)
+             return ret;
+
      /* look for the trip point corresponding to the current temperature */
      cur_trip = NULL;
      for (i = 0; i < therm->fan->bios.nr_fan_trip; i++) {
@@ -67,9 +71,13 @@ static int
 nvkm_therm_compute_linear_duty(struct nvkm_therm *therm, u8 linear_min_temp,
                                u8 linear_max_temp)
 {
-     u8  temp = therm->func->temp_get(therm);
+     int temp, ret;
      u16 duty;
 
+     ret = therm->func->temp_get(therm, &temp);
+     if (ret < 0)
+             return ret;
+
      /* handle the non-linear part first */
      if (temp < linear_min_temp)
              return therm->fan->bios.min_duty;
@@ -182,6 +190,7 @@ nvkm_therm_fan_mode(struct nvkm_therm *therm, int mode)
 {
      struct nvkm_subdev *subdev = &therm->subdev;
      struct nvkm_device *device = subdev->device;
+     int val;
      static const char *name[] = {
              "disabled",
              "manual",
@@ -197,7 +206,7 @@ nvkm_therm_fan_mode(struct nvkm_therm *therm, int mode)
      /* do not allow automatic fan management if the thermal sensor is
       * not available */
      if (mode == NVKM_THERM_CTRL_AUTO &&
-         therm->func->temp_get(therm) < 0)
+         therm->func->temp_get(therm, &val) < 0)
              return -EINVAL;
 
      if (therm->mode == mode)
drm/nouveau/nvkm/subdev/therm/g84.c +1 -1
index 96f8da40..3bb2d829 100644
@@ -27,14 +27,15 @@
 #include <subdev/fuse.h>
 
 int
-g84_temp_get(struct nvkm_therm *therm)
+g84_temp_get(struct nvkm_therm *therm, int *val)
 {
      struct nvkm_device *device = therm->subdev.device;
 
Quoted 12 lines

drm/nouveau/nvkm/subdev/therm/g84.c line 37

Quoted 7 lines
drm/nouveau/nvkm/subdev/therm/g84.c +3 -3
-     if (nvkm_fuse_read(device->fuse, 0x1a8) == 1)
-             return nvkm_rd32(device, 0x20400);
-     else
+     if (nvkm_fuse_read(device->fuse, 0x1a8) != 1)
              return -ENODEV;
+
+     *val = nvkm_rd32(device, 0x20400);

You could allow passing NULL values for val for when you are not interested by the results, as you did in some places further up.
I would probably check for NULL values for val, and for therm though it seems to be an implicit rule that the caller should be the one doing the check.

well, I think we should do all NULL checks inside the "public" subdev functions. g84_temp_get is internal to the subdev, so we can assume therm never to be NULL.
Will go through those and see where some are missing related to my changes.

Quoted 18 lines

drm/nouveau/nvkm/subdev/therm/g84.c g84_therm_threshold_hyst_emulation(struct nvkm_therm *therm, · line 119

Quoted 11 lines
drm/nouveau/nvkm/subdev/therm/g84.c +2 -1
+     return 0;
 }
 
 void
@@ -115,7 +116,7 @@ g84_therm_threshold_hyst_emulation(struct nvkm_therm *therm,
      }
 
      /* fix the state (in case someone reprogrammed the alarms) */
-     cur = therm->func->temp_get(therm);
+     therm->func->temp_get(therm, &cur);

Should there be a check for the return value of the temp_get() function here, and error out if an error code was returned? In any case, you are the behaviour here, as if temp_get() previously returned an error code, the if-statement would always be false, whereas now, it’s undecided as cur will not even be initialised in that case!

Quoted 3 lines

I am not sure whether it should be the caller of temp_get() or temp_get() itself which should initialise a default value for the val argument (probably the latter).

I think error checking is the right way to go here, then we don't need a default value. Values in an error case are usually not trustworthy anyhow.

Quoted 163 lines
Quoted 163 lines
drm/nouveau/nvkm/subdev/therm/g84.c +0 -0
      if (new_state == NVKM_THERM_THRS_LOWER && cur > thrs->temp)
              new_state = NVKM_THERM_THRS_HIGHER;
      else if (new_state == NVKM_THERM_THRS_HIGHER &&
drm/nouveau/nvkm/subdev/therm/gp100.c +5 -4
index 9f0dea3f..d8206748 100644
@@ -24,7 +24,7 @@
 #include "priv.h"
 
 static int
-gp100_temp_get(struct nvkm_therm *therm)
+gp100_temp_get(struct nvkm_therm *therm, int *val)
 {
      struct nvkm_device *device = therm->subdev.device;
      struct nvkm_subdev *subdev = &therm->subdev;
@@ -36,9 +36,10 @@ gp100_temp_get(struct nvkm_therm *therm)
              nvkm_trace(subdev, "reading temperature from SHADOWed sensor\n");
 
      /* device valid */
-     if (tsensor & 0x20000000)
-             return (inttemp >> 8);
-     else
+     if (tsensor & 0x20000000) {
+             *val = inttemp >> 8;
+             return 0;
+     } else
              return -ENODEV;
 }
 
drm/nouveau/nvkm/subdev/therm/nv40.c +3 -6
index 2c92ffb5..cfd5b215 100644
@@ -70,7 +70,7 @@ nv40_sensor_setup(struct nvkm_therm *therm)
 }
 
 static int
-nv40_temp_get(struct nvkm_therm *therm)
+nv40_temp_get(struct nvkm_therm *therm, int *val)
 {
      struct nvkm_device *device = therm->subdev.device;
      struct nvbios_therm_sensor *sensor = &therm->bios_sensor;
@@ -95,11 +95,8 @@ nv40_temp_get(struct nvkm_therm *therm)
      core_temp = core_temp + sensor->offset_num / sensor->offset_den;
      core_temp = core_temp + sensor->offset_constant - 8;
 
-     /* reserve negative temperatures for errors */
-     if (core_temp < 0)
-             core_temp = 0;
-
-     return core_temp;
+     *val = core_temp;
+     return 0;
 }
 
 static int
drm/nouveau/nvkm/subdev/therm/nv50.c +3 -6
index 9b57b433..62ec4063 100644
@@ -126,7 +126,7 @@ nv50_sensor_setup(struct nvkm_therm *therm)
 }
 
 static int
-nv50_temp_get(struct nvkm_therm *therm)
+nv50_temp_get(struct nvkm_therm *therm, int *val)
 {
      struct nvkm_device *device = therm->subdev.device;
      struct nvbios_therm_sensor *sensor = &therm->bios_sensor;
@@ -143,11 +143,8 @@ nv50_temp_get(struct nvkm_therm *therm)
      core_temp = core_temp + sensor->offset_num / sensor->offset_den;
      core_temp = core_temp + sensor->offset_constant - 8;
 
-     /* reserve negative temperatures for errors */
-     if (core_temp < 0)
-             core_temp = 0;
-
-     return core_temp;
+     *val = core_temp;
+     return 0;
 }
 
 static void
drm/nouveau/nvkm/subdev/therm/priv.h +2 -2
index 1f46e371..b325ec5f 100644
@@ -91,7 +91,7 @@ struct nvkm_therm_func {
      int (*pwm_set)(struct nvkm_therm *, int line, u32, u32);
      int (*pwm_clock)(struct nvkm_therm *, int line);
 
-     int (*temp_get)(struct nvkm_therm *);
+     int (*temp_get)(struct nvkm_therm *, int *);
 
      int (*fan_sense)(struct nvkm_therm *);
 
@@ -105,7 +105,7 @@ int  nv50_fan_pwm_get(struct nvkm_therm *, int, u32 *, u32 *);
 int  nv50_fan_pwm_set(struct nvkm_therm *, int, u32, u32);
 int  nv50_fan_pwm_clock(struct nvkm_therm *, int);
 
-int  g84_temp_get(struct nvkm_therm *);
+int  g84_temp_get(struct nvkm_therm *, int *);
 void g84_sensor_setup(struct nvkm_therm *);
 void g84_therm_fini(struct nvkm_therm *);
 
drm/nouveau/nvkm/subdev/therm/temp.c +12 -4
index ddb2b2c6..5ec2dfb3 100644
@@ -86,7 +86,10 @@ nvkm_therm_sensor_event(struct nvkm_therm *therm, enum nvkm_therm_thrs thrs,
      static const char * const thresholds[] = {
              "fanboost", "downclock", "critical", "shutdown"
      };
-     int temperature = therm->func->temp_get(therm);
+     int temperature;
+
+     if (therm->func->temp_get(therm, &temperature) < 0)
+             return;
 
      if (thrs < 0 || thrs > 3)
              return;
@@ -140,7 +143,10 @@ nvkm_therm_threshold_hyst_polling(struct nvkm_therm *therm,
 {
      enum nvkm_therm_thrs_direction direction;
      enum nvkm_therm_thrs_state prev_state, new_state;
-     int temp = therm->func->temp_get(therm);
+     int temp;
+
+     if (therm->func->temp_get(therm, &temp) < 0)
+             return;
 
      prev_state = nvkm_therm_sensor_get_threshold_state(therm, thrs_name);
 
@@ -166,6 +172,7 @@ alarm_timer_callback(struct nvkm_alarm *alarm)
      struct nvbios_therm_sensor *sensor = &therm->bios_sensor;
      struct nvkm_timer *tmr = therm->subdev.device->timer;
      unsigned long flags;
+     int val;
 
      spin_lock_irqsave(&therm->sensor.alarm_program_lock, flags);
 
@@ -185,7 +192,7 @@ alarm_timer_callback(struct nvkm_alarm *alarm)
      spin_unlock_irqrestore(&therm->sensor.alarm_program_lock, flags);
 
      /* schedule the next poll in one second */
-     if (therm->func->temp_get(therm) >= 0)
+     if (therm->func->temp_get(therm, &val) >= 0)
              nvkm_timer_alarm(tmr, 1000000000ULL, alarm);
 }
 
@@ -227,9 +234,10 @@ nvkm_therm_sensor_fini(struct nvkm_therm *therm, bool suspend)
 void
 nvkm_therm_sensor_preinit(struct nvkm_therm *therm)
 {
+     int val;
      const char *sensor_avail = "yes";
 
-     if (therm->func->temp_get(therm) < 0)
+     if (therm->func->temp_get(therm, &val) < 0)
              sensor_avail = "no";
 
Quoted 8 lines
Quoted 8 lines
drm/nouveau/nvkm/subdev/therm/temp.c +0 -1
      nvkm_debug(&therm->subdev, "internal sensor: %s\n", sensor_avail);
--

2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

#7 lore raw

RFC PATCH 2/29 hwmon: properly check for errors

In reply to a message not in the archive

Otherwise hwmon interprets error codes as real values.

---
 drm/nouveau/nouveau_hwmon.c | 33 ++++++++++++++++++++++++++-------
 1 file changed, 26 insertions(+), 7 deletions(-)
drm/nouveau/nouveau_hwmon.c +26 -7
index f1914d9a..0d75c14d 100644
@@ -470,18 +470,23 @@ nouveau_fan_read(struct device *dev, u32 attr, int channel, long *val)
 	struct drm_device *drm_dev = dev_get_drvdata(dev);
 	struct nouveau_drm *drm = nouveau_drm(drm_dev);
 	struct nvkm_therm *therm = nvxx_therm(&drm->client.device);
+	int ret;
 
 	if (!therm)
 		return -EOPNOTSUPP;
 
 	switch (attr) {
 	case hwmon_fan_input:
-		*val = nvkm_therm_fan_sense(therm);
+		ret = nvkm_therm_fan_sense(therm);
 		break;
 	default:
 		return -EOPNOTSUPP;
 	}
 
+	if (ret < 0)
+		return ret;
+
+	*val = ret;
 	return 0;
 }
 
@@ -491,7 +496,7 @@ nouveau_in_read(struct device *dev, u32 attr, int channel, long *val)
 	struct drm_device *drm_dev = dev_get_drvdata(dev);
 	struct nouveau_drm *drm = nouveau_drm(drm_dev);
 	struct nvkm_volt *volt = nvxx_volt(&drm->client.device);
-	int ret;
+	int ret = 0;
 
 	if (!volt)
 		return -EOPNOTSUPP;
@@ -499,7 +504,8 @@ nouveau_in_read(struct device *dev, u32 attr, int channel, long *val)
 	switch (attr) {
 	case hwmon_in_input:
 		ret = nvkm_volt_get(volt);
-		*val = ret < 0 ? ret : (ret / 1000);
+		if (ret >= 0)
+			*val = ret / 1000;
 		break;
 	case hwmon_in_min:
 		*val = volt->min_uv > 0 ? (volt->min_uv / 1000) : -ENODEV;
@@ -511,7 +517,7 @@ nouveau_in_read(struct device *dev, u32 attr, int channel, long *val)
 		return -EOPNOTSUPP;
 	}
 
-	return 0;
+	return ret;
 }
 
 static int
@@ -520,21 +526,26 @@ nouveau_pwm_read(struct device *dev, u32 attr, int channel, long *val)
 	struct drm_device *drm_dev = dev_get_drvdata(dev);
 	struct nouveau_drm *drm = nouveau_drm(drm_dev);
 	struct nvkm_therm *therm = nvxx_therm(&drm->client.device);
+	int ret;
 
 	if (!therm || !therm->attr_get || !therm->fan_get)
 		return -EOPNOTSUPP;
 
 	switch (attr) {
 	case hwmon_pwm_enable:
-		*val = therm->attr_get(therm, NVKM_THERM_ATTR_FAN_MODE);
+		ret = therm->attr_get(therm, NVKM_THERM_ATTR_FAN_MODE);
 		break;
 	case hwmon_pwm_input:
-		*val = therm->fan_get(therm);
+		ret = therm->fan_get(therm);
 		break;
 	default:
 		return -EOPNOTSUPP;
 	}
 
+	if (ret < 0)
+		return ret;
+
+	*val = ret;
 	return 0;
 }
 
@@ -544,18 +555,26 @@ nouveau_power_read(struct device *dev, u32 attr, int channel, long *val)
 	struct drm_device *drm_dev = dev_get_drvdata(dev);
 	struct nouveau_drm *drm = nouveau_drm(drm_dev);
 	struct nvkm_iccsense *iccsense = nvxx_iccsense(&drm->client.device);
+	int ret;
 
 	if (!iccsense)
 		return -EOPNOTSUPP;
 
 	switch (attr) {
 	case hwmon_power_input:
-		*val = nvkm_iccsense_read_all(iccsense);
+		ret = nvkm_iccsense_read_all(iccsense);
+		if (ret < 0)
+			return ret;
+		*val = ret;
 		break;
 	case hwmon_power_max:
+		if (iccsense->power_w_max <= 0)
+			return -ENODEV;
 		*val = iccsense->power_w_max;
 		break;
 	case hwmon_power_crit:
+		if (iccsense->power_w_crit <= 0)
+			return -ENODEV;
 		*val = iccsense->power_w_crit;
 		break;
 	default:
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20170915171129.5009-3-karolherbst-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org

Reviewed-by
#9 lore raw

Re: [RFC PATCH 02/29] hwmon: properly check for errors

Quoted 128 lines · Karol Herbst

Otherwise hwmon interprets error codes as real values.

---
 drm/nouveau/nouveau_hwmon.c | 33 ++++++++++++++++++++++++++-------
 1 file changed, 26 insertions(+), 7 deletions(-)
drm/nouveau/nouveau_hwmon.c +26 -7
index f1914d9a..0d75c14d 100644
@@ -470,18 +470,23 @@ nouveau_fan_read(struct device *dev, u32 attr, int channel, long *val)
 	struct drm_device *drm_dev = dev_get_drvdata(dev);
 	struct nouveau_drm *drm = nouveau_drm(drm_dev);
 	struct nvkm_therm *therm = nvxx_therm(&drm->client.device);
+	int ret;
 
 	if (!therm)
 		return -EOPNOTSUPP;
 
 	switch (attr) {
 	case hwmon_fan_input:
-		*val = nvkm_therm_fan_sense(therm);
+		ret = nvkm_therm_fan_sense(therm);
 		break;
 	default:
 		return -EOPNOTSUPP;
 	}
 
+	if (ret < 0)
+		return ret;
+
+	*val = ret;
 	return 0;
 }
 
@@ -491,7 +496,7 @@ nouveau_in_read(struct device *dev, u32 attr, int channel, long *val)
 	struct drm_device *drm_dev = dev_get_drvdata(dev);
 	struct nouveau_drm *drm = nouveau_drm(drm_dev);
 	struct nvkm_volt *volt = nvxx_volt(&drm->client.device);
-	int ret;
+	int ret = 0;
 
 	if (!volt)
 		return -EOPNOTSUPP;
@@ -499,7 +504,8 @@ nouveau_in_read(struct device *dev, u32 attr, int channel, long *val)
 	switch (attr) {
 	case hwmon_in_input:
 		ret = nvkm_volt_get(volt);
-		*val = ret < 0 ? ret : (ret / 1000);
+		if (ret >= 0)
+			*val = ret / 1000;
 		break;
 	case hwmon_in_min:
 		*val = volt->min_uv > 0 ? (volt->min_uv / 1000) : -ENODEV;
@@ -511,7 +517,7 @@ nouveau_in_read(struct device *dev, u32 attr, int channel, long *val)
 		return -EOPNOTSUPP;
 	}
 
-	return 0;
+	return ret;
 }
 
 static int
@@ -520,21 +526,26 @@ nouveau_pwm_read(struct device *dev, u32 attr, int channel, long *val)
 	struct drm_device *drm_dev = dev_get_drvdata(dev);
 	struct nouveau_drm *drm = nouveau_drm(drm_dev);
 	struct nvkm_therm *therm = nvxx_therm(&drm->client.device);
+	int ret;
 
 	if (!therm || !therm->attr_get || !therm->fan_get)
 		return -EOPNOTSUPP;
 
 	switch (attr) {
 	case hwmon_pwm_enable:
-		*val = therm->attr_get(therm, NVKM_THERM_ATTR_FAN_MODE);
+		ret = therm->attr_get(therm, NVKM_THERM_ATTR_FAN_MODE);
 		break;
 	case hwmon_pwm_input:
-		*val = therm->fan_get(therm);
+		ret = therm->fan_get(therm);
 		break;
 	default:
 		return -EOPNOTSUPP;
 	}
 
+	if (ret < 0)
+		return ret;
+
+	*val = ret;
 	return 0;
 }
 
@@ -544,18 +555,26 @@ nouveau_power_read(struct device *dev, u32 attr, int channel, long *val)
 	struct drm_device *drm_dev = dev_get_drvdata(dev);
 	struct nouveau_drm *drm = nouveau_drm(drm_dev);
 	struct nvkm_iccsense *iccsense = nvxx_iccsense(&drm->client.device);
+	int ret;
 
 	if (!iccsense)
 		return -EOPNOTSUPP;
 
 	switch (attr) {
 	case hwmon_power_input:
-		*val = nvkm_iccsense_read_all(iccsense);
+		ret = nvkm_iccsense_read_all(iccsense);
+		if (ret < 0)
+			return ret;
+		*val = ret;
 		break;
 	case hwmon_power_max:
+		if (iccsense->power_w_max <= 0)
+			return -ENODEV;
 		*val = iccsense->power_w_max;
 		break;
 	case hwmon_power_crit:
+		if (iccsense->power_w_crit <= 0)
+			return -ENODEV;
 		*val = iccsense->power_w_crit;
 		break;
 	default:
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

#10 lore raw

RFC PATCH 3/29 subdev/volt/gk104: return error when read fails

In reply to a message not in the archive

While my gpu was powered off, hwmon returned 0.6V as the current voltage. If nvkm_rd32 fails for any reason, return the error.

With that sensors will display a "N/A" instead of 0.6V.

---
 drm/nouveau/nvkm/subdev/volt/gk104.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drm/nouveau/nvkm/subdev/volt/gk104.c +6 -1
index 1c744e02..53a7af9d 100644
@@ -40,10 +40,15 @@ gk104_volt_get(struct nvkm_volt *base)
 {
 	struct nvbios_volt *bios = &gk104_volt(base)->bios;
 	struct nvkm_device *device = base->subdev.device;
-	u32 div, duty;
+	int div, duty;
 
 	div  = nvkm_rd32(device, 0x20340);
+	if (div < 0)
+		return div;
+
 	duty = nvkm_rd32(device, 0x20344);
+	if (duty < 0)
+		return duty;
 
 	return bios->base + bios->pwm_range * duty / div;
 }
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20170915171129.5009-4-karolherbst-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org

Reviewed-by
#12 lore raw

Re: [RFC PATCH 03/29] subdev/volt/gk104: return error when read fails

Quoted 4 lines · Karol Herbst

While my gpu was powered off, hwmon returned 0.6V as the current voltage. If nvkm_rd32 fails for any reason, return the error.

With that sensors will display a "N/A" instead of 0.6V.

Small nitpick, add a comma between “that” and “sensors”. Otherwise,

Quoted 34 lines
---
 drm/nouveau/nvkm/subdev/volt/gk104.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drm/nouveau/nvkm/subdev/volt/gk104.c +6 -1
index 1c744e02..53a7af9d 100644
@@ -40,10 +40,15 @@ gk104_volt_get(struct nvkm_volt *base)
 {
 	struct nvbios_volt *bios = &gk104_volt(base)->bios;
 	struct nvkm_device *device = base->subdev.device;
-	u32 div, duty;
+	int div, duty;
 
 	div  = nvkm_rd32(device, 0x20340);
+	if (div < 0)
+		return div;
+
 	duty = nvkm_rd32(device, 0x20344);
+	if (duty < 0)
+		return duty;
 
 	return bios->base + bios->pwm_range * duty / div;
 }
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20171008102906.b7gg4ugqa2w4vdag-WLoDKDh+7sdAfugRpC6u6w@public.gmane.org

#14 lore raw

Re: [RFC PATCH 03/29] subdev/volt/gk104: return error when read fails

Quoted 11 lines · Pierre Moreau
Quoted 4 lines · Karol Herbst

While my gpu was powered off, hwmon returned 0.6V as the current voltage. If nvkm_rd32 fails for any reason, return the error.

With that sensors will display a "N/A" instead of 0.6V.

Small nitpick, add a comma between “that” and “sensors”. Otherwise,

I think in the end I am not _that_ happy with that change. nvkm_rd32 can't return an error code, but as we interpret the full register as the value, values above 0x7fffffff are most likely an error on either our side or the hardware side. When the GPU is suspended we get 0xffffffff out, but this code shouldn't be called in the first place when the GPU is suspended. We can't really trust runpm as well due to race conditions, waking up the GPU is another terrible idea.

Quoted 30 lines
Quoted 30 lines
---
 drm/nouveau/nvkm/subdev/volt/gk104.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drm/nouveau/nvkm/subdev/volt/gk104.c +6 -2
index 1c744e02..53a7af9d 100644
@@ -40,10 +40,15 @@ gk104_volt_get(struct nvkm_volt *base)
 {
      struct nvbios_volt *bios = &gk104_volt(base)->bios;
      struct nvkm_device *device = base->subdev.device;
-     u32 div, duty;
+     int div, duty;
 
      div  = nvkm_rd32(device, 0x20340);
+     if (div < 0)
+             return div;
+
      duty = nvkm_rd32(device, 0x20344);
+     if (duty < 0)
+             return duty;
 
      return bios->base + bios->pwm_range * duty / div;
 }
--

2.14.1

Quoted 4 lines
Quoted 4 lines

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

#15 lore raw

RFC PATCH 4/29 clk: Rename nvkm_pstate_calc to nvkm_clk_update and export it

In reply to a message not in the archive

This function will be used to update the current clock state.

This will happen for various reasons:
* Temperature changes
* User changes clocking state
* Load changes

v2: remove parameter name

---
 drm/nouveau/include/nvkm/subdev/clk.h |  1 +
 drm/nouveau/nvkm/subdev/clk/base.c    | 26 ++++++++++++++++----------
 2 files changed, 17 insertions(+), 10 deletions(-)
drm/nouveau/include/nvkm/subdev/clk.h +1 -0
index e5275f74..ce3bbcfe 100644
@@ -123,6 +123,7 @@ int nvkm_clk_ustate(struct nvkm_clk *, int req, int pwr);
 int nvkm_clk_astate(struct nvkm_clk *, int req, int rel, bool wait);
 int nvkm_clk_dstate(struct nvkm_clk *, int req, int rel);
 int nvkm_clk_tstate(struct nvkm_clk *, u8 temperature);
+int nvkm_clk_update(struct nvkm_clk *, bool wait);
 
 int nv04_clk_new(struct nvkm_device *, int, struct nvkm_clk **);
 int nv40_clk_new(struct nvkm_device *, int, struct nvkm_clk **);
drm/nouveau/nvkm/subdev/clk/base.c +16 -10
index e4c8d310..ecff3ff3 100644
@@ -296,7 +296,7 @@ nvkm_pstate_prog(struct nvkm_clk *clk, int pstatei)
 }
 
 static void
-nvkm_pstate_work(struct work_struct *work)
+nvkm_clk_update_work(struct work_struct *work)
 {
 	struct nvkm_clk *clk = container_of(work, typeof(*clk), work);
 	struct nvkm_subdev *subdev = &clk->subdev;
@@ -332,9 +332,15 @@ nvkm_pstate_work(struct work_struct *work)
 	nvkm_notify_get(&clk->pwrsrc_ntfy);
 }
 
-static int
-nvkm_pstate_calc(struct nvkm_clk *clk, bool wait)
+int
+nvkm_clk_update(struct nvkm_clk *clk, bool wait)
 {
+	if (!clk)
+		return -EINVAL;
+
+	if (!clk->allow_reclock)
+		return -ENODEV;
+
 	atomic_set(&clk->waiting, 1);
 	schedule_work(&clk->work);
 	if (wait)
@@ -524,7 +530,7 @@ nvkm_clk_ustate(struct nvkm_clk *clk, int req, int pwr)
 	if (ret >= 0) {
 		if (ret -= 2, pwr) clk->ustate_ac = ret;
 		else		   clk->ustate_dc = ret;
-		return nvkm_pstate_calc(clk, true);
+		return nvkm_clk_update(clk, true);
 	}
 	return ret;
 }
@@ -536,7 +542,7 @@ nvkm_clk_astate(struct nvkm_clk *clk, int req, int rel, bool wait)
 	if ( rel) clk->astate += rel;
 	clk->astate = min(clk->astate, clk->state_nr - 1);
 	clk->astate = max(clk->astate, 0);
-	return nvkm_pstate_calc(clk, wait);
+	return nvkm_clk_update(clk, wait);
 }
 
 int
@@ -545,7 +551,7 @@ nvkm_clk_tstate(struct nvkm_clk *clk, u8 temp)
 	if (clk->temp == temp)
 		return 0;
 	clk->temp = temp;
-	return nvkm_pstate_calc(clk, false);
+	return nvkm_clk_update(clk, false);
 }
 
 int
@@ -555,7 +561,7 @@ nvkm_clk_dstate(struct nvkm_clk *clk, int req, int rel)
 	if ( rel) clk->dstate += rel;
 	clk->dstate = min(clk->dstate, clk->state_nr - 1);
 	clk->dstate = max(clk->dstate, 0);
-	return nvkm_pstate_calc(clk, true);
+	return nvkm_clk_update(clk, true);
 }
 
 static int
@@ -563,7 +569,7 @@ nvkm_clk_pwrsrc(struct nvkm_notify *notify)
 {
 	struct nvkm_clk *clk =
 		container_of(notify, typeof(*clk), pwrsrc_ntfy);
-	nvkm_pstate_calc(clk, false);
+	nvkm_clk_update(clk, false);
 	return NVKM_NOTIFY_DROP;
 }
 
@@ -618,7 +624,7 @@ nvkm_clk_init(struct nvkm_subdev *subdev)
 	clk->dstate = 0;
 	clk->pstate = -1;
 	clk->temp = 90; /* reasonable default value */
-	nvkm_pstate_calc(clk, true);
+	nvkm_clk_update(clk, true);
 	return 0;
 }
 
@@ -675,7 +681,7 @@ nvkm_clk_ctor(const struct nvkm_clk_func *func, struct nvkm_device *device,
 	clk->ustate_dc = -1;
 	clk->allow_reclock = allow_reclock;
 
-	INIT_WORK(&clk->work, nvkm_pstate_work);
+	INIT_WORK(&clk->work, nvkm_clk_update_work);
 	init_waitqueue_head(&clk->wait);
 	atomic_set(&clk->waiting, 0);
 
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20170915171129.5009-5-karolherbst-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org

#17 lore raw

Re: [RFC PATCH 04/29] clk: Rename nvkm_pstate_calc to nvkm_clk_update and export it

Quoted 95 lines · Karol Herbst

This function will be used to update the current clock state.

This will happen for various reasons:
* Temperature changes
* User changes clocking state
* Load changes

v2: remove parameter name

---
 drm/nouveau/include/nvkm/subdev/clk.h |  1 +
 drm/nouveau/nvkm/subdev/clk/base.c    | 26 ++++++++++++++++----------
 2 files changed, 17 insertions(+), 10 deletions(-)
drm/nouveau/include/nvkm/subdev/clk.h +1 -0
index e5275f74..ce3bbcfe 100644
@@ -123,6 +123,7 @@ int nvkm_clk_ustate(struct nvkm_clk *, int req, int pwr);
 int nvkm_clk_astate(struct nvkm_clk *, int req, int rel, bool wait);
 int nvkm_clk_dstate(struct nvkm_clk *, int req, int rel);
 int nvkm_clk_tstate(struct nvkm_clk *, u8 temperature);
+int nvkm_clk_update(struct nvkm_clk *, bool wait);
 
 int nv04_clk_new(struct nvkm_device *, int, struct nvkm_clk **);
 int nv40_clk_new(struct nvkm_device *, int, struct nvkm_clk **);
drm/nouveau/nvkm/subdev/clk/base.c +13 -7
index e4c8d310..ecff3ff3 100644
@@ -296,7 +296,7 @@ nvkm_pstate_prog(struct nvkm_clk *clk, int pstatei)
 }
 
 static void
-nvkm_pstate_work(struct work_struct *work)
+nvkm_clk_update_work(struct work_struct *work)
 {
 	struct nvkm_clk *clk = container_of(work, typeof(*clk), work);
 	struct nvkm_subdev *subdev = &clk->subdev;
@@ -332,9 +332,15 @@ nvkm_pstate_work(struct work_struct *work)
 	nvkm_notify_get(&clk->pwrsrc_ntfy);
 }
 
-static int
-nvkm_pstate_calc(struct nvkm_clk *clk, bool wait)
+int
+nvkm_clk_update(struct nvkm_clk *clk, bool wait)
 {
+	if (!clk)
+		return -EINVAL;
+
+	if (!clk->allow_reclock)
+		return -ENODEV;
+
 	atomic_set(&clk->waiting, 1);
 	schedule_work(&clk->work);
 	if (wait)
@@ -524,7 +530,7 @@ nvkm_clk_ustate(struct nvkm_clk *clk, int req, int pwr)
 	if (ret >= 0) {
 		if (ret -= 2, pwr) clk->ustate_ac = ret;
 		else		   clk->ustate_dc = ret;
-		return nvkm_pstate_calc(clk, true);
+		return nvkm_clk_update(clk, true);
 	}
 	return ret;
 }
@@ -536,7 +542,7 @@ nvkm_clk_astate(struct nvkm_clk *clk, int req, int rel, bool wait)
 	if ( rel) clk->astate += rel;
 	clk->astate = min(clk->astate, clk->state_nr - 1);
 	clk->astate = max(clk->astate, 0);
-	return nvkm_pstate_calc(clk, wait);
+	return nvkm_clk_update(clk, wait);
 }
 
 int
@@ -545,7 +551,7 @@ nvkm_clk_tstate(struct nvkm_clk *clk, u8 temp)
 	if (clk->temp == temp)
 		return 0;
 	clk->temp = temp;
-	return nvkm_pstate_calc(clk, false);
+	return nvkm_clk_update(clk, false);
 }
 
 int
@@ -555,7 +561,7 @@ nvkm_clk_dstate(struct nvkm_clk *clk, int req, int rel)
 	if ( rel) clk->dstate += rel;
 	clk->dstate = min(clk->dstate, clk->state_nr - 1);
 	clk->dstate = max(clk->dstate, 0);
-	return nvkm_pstate_calc(clk, true);
+	return nvkm_clk_update(clk, true);
 }
 
 static int

drm/nouveau/nvkm/subdev/clk/base.c nvkm_clk_pwrsrc(struct nvkm_notify *notify) · line 573

Quoted 6 lines
drm/nouveau/nvkm/subdev/clk/base.c +1 -1
@@ -563,7 +569,7 @@ nvkm_clk_pwrsrc(struct nvkm_notify *notify)
 {
 	struct nvkm_clk *clk =
 		container_of(notify, typeof(*clk), pwrsrc_ntfy);
-	nvkm_pstate_calc(clk, false);
+	nvkm_clk_update(clk, false);
 	return NVKM_NOTIFY_DROP;

Same here as below, shouldn’t there be some error checking on what nvkm_clk_update() returned, as it can fail?

drm/nouveau/nvkm/subdev/clk/base.c nvkm_clk_init(struct nvkm_subdev *subdev) · line 628

Quoted 9 lines
drm/nouveau/nvkm/subdev/clk/base.c +1 -1
 }
 
@@ -618,7 +624,7 @@ nvkm_clk_init(struct nvkm_subdev *subdev)
 	clk->dstate = 0;
 	clk->pstate = -1;
 	clk->temp = 90; /* reasonable default value */
-	nvkm_pstate_calc(clk, true);
+	nvkm_clk_update(clk, true);
 	return 0;

nvkm_pstate_calc() did not return any error code, but nvkm_clk_update() now can, so shouldn’t the function return the return value of nvkm_clk_update() instead? Or at least do some error checking on what nvkm_clk_update() returned?

Quoted 18 lines
drm/nouveau/nvkm/subdev/clk/base.c +1 -1
 }
 
@@ -675,7 +681,7 @@ nvkm_clk_ctor(const struct nvkm_clk_func *func, struct nvkm_device *device,
 	clk->ustate_dc = -1;
 	clk->allow_reclock = allow_reclock;
 
-	INIT_WORK(&clk->work, nvkm_pstate_work);
+	INIT_WORK(&clk->work, nvkm_clk_update_work);
 	init_waitqueue_head(&clk->wait);
 	atomic_set(&clk->waiting, 0);
 
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20171008104129.k2irj2mon7mmkfoj-WLoDKDh+7sdAfugRpC6u6w@public.gmane.org

#19 lore raw

Re: [RFC PATCH 04/29] clk: Rename nvkm_pstate_calc to nvkm_clk_update and export it

Quoted 94 lines · Pierre Moreau
Quoted 93 lines · Karol Herbst

This function will be used to update the current clock state.

This will happen for various reasons:
* Temperature changes
* User changes clocking state
* Load changes

v2: remove parameter name

---
 drm/nouveau/include/nvkm/subdev/clk.h |  1 +
 drm/nouveau/nvkm/subdev/clk/base.c    | 26 ++++++++++++++++----------
 2 files changed, 17 insertions(+), 10 deletions(-)
drm/nouveau/include/nvkm/subdev/clk.h +1 -0
index e5275f74..ce3bbcfe 100644
@@ -123,6 +123,7 @@ int nvkm_clk_ustate(struct nvkm_clk *, int req, int pwr);
 int nvkm_clk_astate(struct nvkm_clk *, int req, int rel, bool wait);
 int nvkm_clk_dstate(struct nvkm_clk *, int req, int rel);
 int nvkm_clk_tstate(struct nvkm_clk *, u8 temperature);
+int nvkm_clk_update(struct nvkm_clk *, bool wait);
 
 int nv04_clk_new(struct nvkm_device *, int, struct nvkm_clk **);
 int nv40_clk_new(struct nvkm_device *, int, struct nvkm_clk **);
drm/nouveau/nvkm/subdev/clk/base.c +13 -7
index e4c8d310..ecff3ff3 100644
@@ -296,7 +296,7 @@ nvkm_pstate_prog(struct nvkm_clk *clk, int pstatei)
 }
 
 static void
-nvkm_pstate_work(struct work_struct *work)
+nvkm_clk_update_work(struct work_struct *work)
 {
      struct nvkm_clk *clk = container_of(work, typeof(*clk), work);
      struct nvkm_subdev *subdev = &clk->subdev;
@@ -332,9 +332,15 @@ nvkm_pstate_work(struct work_struct *work)
      nvkm_notify_get(&clk->pwrsrc_ntfy);
 }
 
-static int
-nvkm_pstate_calc(struct nvkm_clk *clk, bool wait)
+int
+nvkm_clk_update(struct nvkm_clk *clk, bool wait)
 {
+     if (!clk)
+             return -EINVAL;
+
+     if (!clk->allow_reclock)
+             return -ENODEV;
+
      atomic_set(&clk->waiting, 1);
      schedule_work(&clk->work);
      if (wait)
@@ -524,7 +530,7 @@ nvkm_clk_ustate(struct nvkm_clk *clk, int req, int pwr)
      if (ret >= 0) {
              if (ret -= 2, pwr) clk->ustate_ac = ret;
              else               clk->ustate_dc = ret;
-             return nvkm_pstate_calc(clk, true);
+             return nvkm_clk_update(clk, true);
      }
      return ret;
 }
@@ -536,7 +542,7 @@ nvkm_clk_astate(struct nvkm_clk *clk, int req, int rel, bool wait)
      if ( rel) clk->astate += rel;
      clk->astate = min(clk->astate, clk->state_nr - 1);
      clk->astate = max(clk->astate, 0);
-     return nvkm_pstate_calc(clk, wait);
+     return nvkm_clk_update(clk, wait);
 }
 
 int
@@ -545,7 +551,7 @@ nvkm_clk_tstate(struct nvkm_clk *clk, u8 temp)
      if (clk->temp == temp)
              return 0;
      clk->temp = temp;
-     return nvkm_pstate_calc(clk, false);
+     return nvkm_clk_update(clk, false);
 }
 
 int
@@ -555,7 +561,7 @@ nvkm_clk_dstate(struct nvkm_clk *clk, int req, int rel)
      if ( rel) clk->dstate += rel;
      clk->dstate = min(clk->dstate, clk->state_nr - 1);
      clk->dstate = max(clk->dstate, 0);
-     return nvkm_pstate_calc(clk, true);
+     return nvkm_clk_update(clk, true);
 }
 
Quoted 12 lines

drm/nouveau/nvkm/subdev/clk/base.c nvkm_clk_pwrsrc(struct nvkm_notify *notify) · line 573

Quoted 8 lines
drm/nouveau/nvkm/subdev/clk/base.c +1 -1
 static int
@@ -563,7 +569,7 @@ nvkm_clk_pwrsrc(struct nvkm_notify *notify)
 {
      struct nvkm_clk *clk =
              container_of(notify, typeof(*clk), pwrsrc_ntfy);
-     nvkm_pstate_calc(clk, false);
+     nvkm_clk_update(clk, false);
      return NVKM_NOTIFY_DROP;

Same here as below, shouldn’t there be some error checking on what nvkm_clk_update() returned, as it can fail?

it doesn't matter here, because it shouldn't change the return value of that function.

Quoted 14 lines

drm/nouveau/nvkm/subdev/clk/base.c nvkm_clk_init(struct nvkm_subdev *subdev) · line 628

Quoted 9 lines
drm/nouveau/nvkm/subdev/clk/base.c +1 -1
 }
 
@@ -618,7 +624,7 @@ nvkm_clk_init(struct nvkm_subdev *subdev)
      clk->dstate = 0;
      clk->pstate = -1;
      clk->temp = 90; /* reasonable default value */
-     nvkm_pstate_calc(clk, true);
+     nvkm_clk_update(clk, true);
      return 0;

nvkm_pstate_calc() did not return any error code, but nvkm_clk_update() now can, so shouldn’t the function return the return value of nvkm_clk_update() instead? Or at least do some error checking on what nvkm_clk_update() returned?

I don't want nvkm_clk_init to fail just because we don't allow reclocking (which is basically the only reason it may return !0 here)

Quoted 12 lines
Quoted 12 lines
drm/nouveau/nvkm/subdev/clk/base.c +1 -1
 }
 
@@ -675,7 +681,7 @@ nvkm_clk_ctor(const struct nvkm_clk_func *func, struct nvkm_device *device,
      clk->ustate_dc = -1;
      clk->allow_reclock = allow_reclock;
 
-     INIT_WORK(&clk->work, nvkm_pstate_work);
+     INIT_WORK(&clk->work, nvkm_clk_update_work);
      init_waitqueue_head(&clk->wait);
      atomic_set(&clk->waiting, 0);
 
Quoted 7 lines
Quoted 7 lines

--
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

#20 lore raw

RFC PATCH 5/29 clk: Remove dstate

In reply to a message not in the archive

We won't need it now, because we will adjust the clocks depending on engine loads later on anyway or a static lookup table. It also simplifies the clocking logic.

This code was nowhere used anyway and just a mock up.

v2: fixed typo in commit message

---
 drm/nouveau/include/nvkm/subdev/clk.h |  2 --
 drm/nouveau/nvkm/subdev/clk/base.c    | 16 ++--------------
 2 files changed, 2 insertions(+), 16 deletions(-)
drm/nouveau/include/nvkm/subdev/clk.h +0 -2
index ce3bbcfe..1340f5b8 100644
@@ -99,7 +99,6 @@ struct nvkm_clk {
 	int ustate_ac; /* user-requested (-1 disabled, -2 perfmon) */
 	int ustate_dc; /* user-requested (-1 disabled, -2 perfmon) */
 	int astate; /* perfmon adjustment (base) */
-	int dstate; /* display adjustment (min+) */
 	u8  temp;
 
 	bool allow_reclock;
@@ -121,7 +120,6 @@ struct nvkm_clk {
 int nvkm_clk_read(struct nvkm_clk *, enum nv_clk_src);
 int nvkm_clk_ustate(struct nvkm_clk *, int req, int pwr);
 int nvkm_clk_astate(struct nvkm_clk *, int req, int rel, bool wait);
-int nvkm_clk_dstate(struct nvkm_clk *, int req, int rel);
 int nvkm_clk_tstate(struct nvkm_clk *, u8 temperature);
 int nvkm_clk_update(struct nvkm_clk *, bool wait);
 
drm/nouveau/nvkm/subdev/clk/base.c +2 -14
index ecff3ff3..07d530ed 100644
@@ -306,15 +306,14 @@ nvkm_clk_update_work(struct work_struct *work)
 		return;
 	clk->pwrsrc = power_supply_is_system_supplied();
 
-	nvkm_trace(subdev, "P %d PWR %d U(AC) %d U(DC) %d A %d T %d°C D %d\n",
+	nvkm_trace(subdev, "P %d PWR %d U(AC) %d U(DC) %d A %d T %d°C\n",
 		   clk->pstate, clk->pwrsrc, clk->ustate_ac, clk->ustate_dc,
-		   clk->astate, clk->temp, clk->dstate);
+		   clk->astate, clk->temp);
 
 	pstate = clk->pwrsrc ? clk->ustate_ac : clk->ustate_dc;
 	if (clk->state_nr && pstate != -1) {
 		pstate = (pstate < 0) ? clk->astate : pstate;
 		pstate = min(pstate, clk->state_nr - 1);
-		pstate = max(pstate, clk->dstate);
 	} else {
 		pstate = clk->pstate = -1;
 	}
@@ -554,16 +553,6 @@ nvkm_clk_tstate(struct nvkm_clk *clk, u8 temp)
 	return nvkm_clk_update(clk, false);
 }
 
-int
-nvkm_clk_dstate(struct nvkm_clk *clk, int req, int rel)
-{
-	if (!rel) clk->dstate  = req;
-	if ( rel) clk->dstate += rel;
-	clk->dstate = min(clk->dstate, clk->state_nr - 1);
-	clk->dstate = max(clk->dstate, 0);
-	return nvkm_clk_update(clk, true);
-}
-
 static int
 nvkm_clk_pwrsrc(struct nvkm_notify *notify)
 {
@@ -621,7 +610,6 @@ nvkm_clk_init(struct nvkm_subdev *subdev)
 		return clk->func->init(clk);
 
 	clk->astate = clk->state_nr - 1;
-	clk->dstate = 0;
 	clk->pstate = -1;
 	clk->temp = 90; /* reasonable default value */
 	nvkm_clk_update(clk, true);
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20170915171129.5009-6-karolherbst-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org

Reviewed-by
#22 lore raw

Re: [RFC PATCH 05/29] clk: Remove dstate

This patch could be applied before patch 04, that way patch 04 does not need to update a function (nvkm_clk_dstate()) that will be removed in the next patch.

Quoted 89 lines · Karol Herbst

We won't need it now, because we will adjust the clocks depending on engine loads later on anyway or a static lookup table. It also simplifies the clocking logic.

This code was nowhere used anyway and just a mock up.

v2: fixed typo in commit message

---
 drm/nouveau/include/nvkm/subdev/clk.h |  2 --
 drm/nouveau/nvkm/subdev/clk/base.c    | 16 ++--------------
 2 files changed, 2 insertions(+), 16 deletions(-)
drm/nouveau/include/nvkm/subdev/clk.h +0 -2
index ce3bbcfe..1340f5b8 100644
@@ -99,7 +99,6 @@ struct nvkm_clk {
 	int ustate_ac; /* user-requested (-1 disabled, -2 perfmon) */
 	int ustate_dc; /* user-requested (-1 disabled, -2 perfmon) */
 	int astate; /* perfmon adjustment (base) */
-	int dstate; /* display adjustment (min+) */
 	u8  temp;
 
 	bool allow_reclock;
@@ -121,7 +120,6 @@ struct nvkm_clk {
 int nvkm_clk_read(struct nvkm_clk *, enum nv_clk_src);
 int nvkm_clk_ustate(struct nvkm_clk *, int req, int pwr);
 int nvkm_clk_astate(struct nvkm_clk *, int req, int rel, bool wait);
-int nvkm_clk_dstate(struct nvkm_clk *, int req, int rel);
 int nvkm_clk_tstate(struct nvkm_clk *, u8 temperature);
 int nvkm_clk_update(struct nvkm_clk *, bool wait);
 
drm/nouveau/nvkm/subdev/clk/base.c +2 -14
index ecff3ff3..07d530ed 100644
@@ -306,15 +306,14 @@ nvkm_clk_update_work(struct work_struct *work)
 		return;
 	clk->pwrsrc = power_supply_is_system_supplied();
 
-	nvkm_trace(subdev, "P %d PWR %d U(AC) %d U(DC) %d A %d T %d°C D %d\n",
+	nvkm_trace(subdev, "P %d PWR %d U(AC) %d U(DC) %d A %d T %d°C\n",
 		   clk->pstate, clk->pwrsrc, clk->ustate_ac, clk->ustate_dc,
-		   clk->astate, clk->temp, clk->dstate);
+		   clk->astate, clk->temp);
 
 	pstate = clk->pwrsrc ? clk->ustate_ac : clk->ustate_dc;
 	if (clk->state_nr && pstate != -1) {
 		pstate = (pstate < 0) ? clk->astate : pstate;
 		pstate = min(pstate, clk->state_nr - 1);
-		pstate = max(pstate, clk->dstate);
 	} else {
 		pstate = clk->pstate = -1;
 	}
@@ -554,16 +553,6 @@ nvkm_clk_tstate(struct nvkm_clk *clk, u8 temp)
 	return nvkm_clk_update(clk, false);
 }
 
-int
-nvkm_clk_dstate(struct nvkm_clk *clk, int req, int rel)
-{
-	if (!rel) clk->dstate  = req;
-	if ( rel) clk->dstate += rel;
-	clk->dstate = min(clk->dstate, clk->state_nr - 1);
-	clk->dstate = max(clk->dstate, 0);
-	return nvkm_clk_update(clk, true);
-}
-
 static int
 nvkm_clk_pwrsrc(struct nvkm_notify *notify)
 {
@@ -621,7 +610,6 @@ nvkm_clk_init(struct nvkm_subdev *subdev)
 		return clk->func->init(clk);
 
 	clk->astate = clk->state_nr - 1;
-	clk->dstate = 0;
 	clk->pstate = -1;
 	clk->temp = 90; /* reasonable default value */
 	nvkm_clk_update(clk, true);
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

#23 lore raw

RFC PATCH 6/29 clk: Make pstate a pointer to nvkm_pstate

In reply to a message not in the archive

We will access the current cstate at least every second and this saves us some CPU cycles looking them up every second.

v2: Rewording commit message.

---
 drm/nouveau/include/nvkm/subdev/clk.h |  4 +++-
 drm/nouveau/nvkm/engine/device/ctrl.c |  5 ++++-
 drm/nouveau/nvkm/subdev/clk/base.c    | 17 ++++++++++++-----
 drm/nouveau/nvkm/subdev/pmu/gk20a.c   | 18 +++++++-----------
 4 files changed, 26 insertions(+), 18 deletions(-)
drm/nouveau/include/nvkm/subdev/clk.h +3 -1
index 1340f5b8..ec537e08 100644
@@ -10,6 +10,8 @@ struct nvkm_pll_vals;
 #define NVKM_CLK_CSTATE_BASE    -2 /* pstate base */
 #define NVKM_CLK_CSTATE_HIGHEST -3 /* highest possible */
 
+#define NVKM_CLK_PSTATE_DEFAULT -1
+
 enum nv_clk_src {
 	nv_clk_src_crystal,
 	nv_clk_src_href,
@@ -95,7 +97,7 @@ struct nvkm_clk {
 
 	struct nvkm_notify pwrsrc_ntfy;
 	int pwrsrc;
-	int pstate; /* current */
+	struct nvkm_pstate *pstate; /* current */
 	int ustate_ac; /* user-requested (-1 disabled, -2 perfmon) */
 	int ustate_dc; /* user-requested (-1 disabled, -2 perfmon) */
 	int astate; /* perfmon adjustment (base) */
drm/nouveau/nvkm/engine/device/ctrl.c +4 -1
index b0ece71a..da70626c 100644
@@ -52,7 +52,10 @@ nvkm_control_mthd_pstate_info(struct nvkm_control *ctrl, void *data, u32 size)
 		args->v0.ustate_ac = clk->ustate_ac;
 		args->v0.ustate_dc = clk->ustate_dc;
 		args->v0.pwrsrc = clk->pwrsrc;
-		args->v0.pstate = clk->pstate;
+		if (clk->pstate)
+			args->v0.pstate = clk->pstate->pstate;
+		else
+			args->v0.pstate = NVKM_CLK_PSTATE_DEFAULT;
 	} else {
 		args->v0.count = 0;
 		args->v0.ustate_ac = NVIF_CONTROL_PSTATE_INFO_V0_USTATE_DISABLE;
drm/nouveau/nvkm/subdev/clk/base.c +12 -5
index 07d530ed..0d4d9fdf 100644
@@ -271,13 +271,16 @@ nvkm_pstate_prog(struct nvkm_clk *clk, int pstatei)
 	struct nvkm_pstate *pstate;
 	int ret, idx = 0;
 
+	if (pstatei == NVKM_CLK_PSTATE_DEFAULT)
+		return 0;
+
 	list_for_each_entry(pstate, &clk->states, head) {
 		if (idx++ == pstatei)
 			break;
 	}
 
 	nvkm_debug(subdev, "setting performance state %d\n", pstatei);
-	clk->pstate = pstatei;
+	clk->pstate = pstate;
 
 	nvkm_pcie_set_link(pci, pstate->pcie_speed, pstate->pcie_width);
 
@@ -306,8 +309,12 @@ nvkm_clk_update_work(struct work_struct *work)
 		return;
 	clk->pwrsrc = power_supply_is_system_supplied();
 
+	if (clk->pstate)
+		pstate = clk->pstate->pstate;
+	else
+		pstate = NVKM_CLK_PSTATE_DEFAULT;
 	nvkm_trace(subdev, "P %d PWR %d U(AC) %d U(DC) %d A %d T %d°C\n",
-		   clk->pstate, clk->pwrsrc, clk->ustate_ac, clk->ustate_dc,
+		   pstate, clk->pwrsrc, clk->ustate_ac, clk->ustate_dc,
 		   clk->astate, clk->temp);
 
 	pstate = clk->pwrsrc ? clk->ustate_ac : clk->ustate_dc;
@@ -315,11 +322,11 @@ nvkm_clk_update_work(struct work_struct *work)
 		pstate = (pstate < 0) ? clk->astate : pstate;
 		pstate = min(pstate, clk->state_nr - 1);
 	} else {
-		pstate = clk->pstate = -1;
+		pstate = NVKM_CLK_PSTATE_DEFAULT;
 	}
 
 	nvkm_trace(subdev, "-> %d\n", pstate);
-	if (pstate != clk->pstate) {
+	if (!clk->pstate || pstate != clk->pstate->pstate) {
 		int ret = nvkm_pstate_prog(clk, pstate);
 		if (ret) {
 			nvkm_error(subdev, "error setting pstate %d: %d\n",
@@ -610,7 +617,7 @@ nvkm_clk_init(struct nvkm_subdev *subdev)
 		return clk->func->init(clk);
 
 	clk->astate = clk->state_nr - 1;
-	clk->pstate = -1;
+	clk->pstate = NULL;
 	clk->temp = 90; /* reasonable default value */
 	nvkm_clk_update(clk, true);
 	return 0;
drm/nouveau/nvkm/subdev/pmu/gk20a.c +7 -11
index 05e81855..de579726 100644
@@ -55,24 +55,22 @@ gk20a_pmu_dvfs_target(struct gk20a_pmu *pmu, int *state)
 	return nvkm_clk_astate(clk, *state, 0, false);
 }
 
-static void
-gk20a_pmu_dvfs_get_cur_state(struct gk20a_pmu *pmu, int *state)
-{
-	struct nvkm_clk *clk = pmu->base.subdev.device->clk;
-
-	*state = clk->pstate;
-}
-
 static int
 gk20a_pmu_dvfs_get_target_state(struct gk20a_pmu *pmu,
 				int *state, int load)
 {
 	struct gk20a_pmu_dvfs_data *data = pmu->data;
 	struct nvkm_clk *clk = pmu->base.subdev.device->clk;
+	struct nvkm_pstate *pstate = clk->pstate;
 	int cur_level, level;
 
+	if (!pstate) {
+		*state = 0;
+		return 1;
+	}
+
 	/* For GK20A, the performance level is directly mapped to pstate */
-	level = cur_level = clk->pstate;
+	level = cur_level = clk->pstate->pstate;
 
 	if (load > data->p_load_max) {
 		level = min(clk->state_nr - 1, level + (clk->state_nr / 3));
@@ -142,8 +140,6 @@ gk20a_pmu_dvfs_work(struct nvkm_alarm *alarm)
 	nvkm_trace(subdev, "utilization = %d %%, avg_load = %d %%\n",
 		   utilization, data->avg_load);
 
-	gk20a_pmu_dvfs_get_cur_state(pmu, &state);
-
 	if (gk20a_pmu_dvfs_get_target_state(pmu, &state, data->avg_load)) {
 		nvkm_trace(subdev, "set new state to %d\n", state);
 		gk20a_pmu_dvfs_target(pmu, &state);
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20170915171129.5009-7-karolherbst-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org

#25 lore raw

Re: [RFC PATCH 06/29] clk: Make pstate a pointer to nvkm_pstate

The patch seems fine but I found it super confusing that sometimes pstate is a pointer (for example clk->pstate), sometimes it is an int (for example args->v0.pstate).

Quoted 78 lines · Karol Herbst

We will access the current cstate at least every second and this saves us some CPU cycles looking them up every second.

v2: Rewording commit message.

---
 drm/nouveau/include/nvkm/subdev/clk.h |  4 +++-
 drm/nouveau/nvkm/engine/device/ctrl.c |  5 ++++-
 drm/nouveau/nvkm/subdev/clk/base.c    | 17 ++++++++++++-----
 drm/nouveau/nvkm/subdev/pmu/gk20a.c   | 18 +++++++-----------
 4 files changed, 26 insertions(+), 18 deletions(-)
drm/nouveau/include/nvkm/subdev/clk.h +3 -1
index 1340f5b8..ec537e08 100644
@@ -10,6 +10,8 @@ struct nvkm_pll_vals;
 #define NVKM_CLK_CSTATE_BASE    -2 /* pstate base */
 #define NVKM_CLK_CSTATE_HIGHEST -3 /* highest possible */
 
+#define NVKM_CLK_PSTATE_DEFAULT -1
+
 enum nv_clk_src {
 	nv_clk_src_crystal,
 	nv_clk_src_href,
@@ -95,7 +97,7 @@ struct nvkm_clk {
 
 	struct nvkm_notify pwrsrc_ntfy;
 	int pwrsrc;
-	int pstate; /* current */
+	struct nvkm_pstate *pstate; /* current */
 	int ustate_ac; /* user-requested (-1 disabled, -2 perfmon) */
 	int ustate_dc; /* user-requested (-1 disabled, -2 perfmon) */
 	int astate; /* perfmon adjustment (base) */
drm/nouveau/nvkm/engine/device/ctrl.c +4 -1
index b0ece71a..da70626c 100644
@@ -52,7 +52,10 @@ nvkm_control_mthd_pstate_info(struct nvkm_control *ctrl, void *data, u32 size)
 		args->v0.ustate_ac = clk->ustate_ac;
 		args->v0.ustate_dc = clk->ustate_dc;
 		args->v0.pwrsrc = clk->pwrsrc;
-		args->v0.pstate = clk->pstate;
+		if (clk->pstate)
+			args->v0.pstate = clk->pstate->pstate;
+		else
+			args->v0.pstate = NVKM_CLK_PSTATE_DEFAULT;
 	} else {
 		args->v0.count = 0;
 		args->v0.ustate_ac = NVIF_CONTROL_PSTATE_INFO_V0_USTATE_DISABLE;
drm/nouveau/nvkm/subdev/clk/base.c +4 -1
index 07d530ed..0d4d9fdf 100644
@@ -271,13 +271,16 @@ nvkm_pstate_prog(struct nvkm_clk *clk, int pstatei)
 	struct nvkm_pstate *pstate;
 	int ret, idx = 0;
 
+	if (pstatei == NVKM_CLK_PSTATE_DEFAULT)
+		return 0;
+
 	list_for_each_entry(pstate, &clk->states, head) {
 		if (idx++ == pstatei)
 			break;
 	}
 
 	nvkm_debug(subdev, "setting performance state %d\n", pstatei);
-	clk->pstate = pstatei;
+	clk->pstate = pstate;
 
 	nvkm_pcie_set_link(pci, pstate->pcie_speed, pstate->pcie_width);
 
@@ -306,8 +309,12 @@ nvkm_clk_update_work(struct work_struct *work)
 		return;
 	clk->pwrsrc = power_supply_is_system_supplied();
 

drm/nouveau/nvkm/subdev/clk/base.c nvkm_clk_update_work(struct work_struct *work) · line 320

Quoted 10 lines
drm/nouveau/nvkm/subdev/clk/base.c +5 -1
+	if (clk->pstate)
+		pstate = clk->pstate->pstate;
+	else
+		pstate = NVKM_CLK_PSTATE_DEFAULT;
 	nvkm_trace(subdev, "P %d PWR %d U(AC) %d U(DC) %d A %d T %d°C\n",
-		   clk->pstate, clk->pwrsrc, clk->ustate_ac, clk->ustate_dc,
+		   pstate, clk->pwrsrc, clk->ustate_ac, clk->ustate_dc,
 		   clk->astate, clk->temp);
 
 	pstate = clk->pwrsrc ? clk->ustate_ac : clk->ustate_dc;

In the if-statement following the previous line, the -1 could be replaced by NVKM_CLK_PSTATE_DEFAULT.

drm/nouveau/nvkm/subdev/clk/base.c nvkm_clk_update_work(struct work_struct *work) · line 322

Quoted 2 lines
drm/nouveau/nvkm/subdev/clk/base.c +0 -0
@@ -315,11 +322,11 @@ nvkm_clk_update_work(struct work_struct *work)
 		pstate = (pstate < 0) ? clk->astate : pstate;

Can pstate have negative values other than -1?

drm/nouveau/nvkm/subdev/clk/base.c nvkm_clk_update_work(struct work_struct *work) · line 325

Quoted 4 lines
drm/nouveau/nvkm/subdev/clk/base.c +1 -1
 		pstate = min(pstate, clk->state_nr - 1);
 	} else {
-		pstate = clk->pstate = -1;
+		pstate = NVKM_CLK_PSTATE_DEFAULT;

Shouldn’t you also reset clk->pstate to NULL? Or maybe it is nvkm_pstate_prog() which should do it if
pstatei == NVKM_CLK_PSTATE_DEFAULT.

Quoted 69 lines
drm/nouveau/nvkm/subdev/clk/base.c +2 -2
 	}
 
 	nvkm_trace(subdev, "-> %d\n", pstate);
-	if (pstate != clk->pstate) {
+	if (!clk->pstate || pstate != clk->pstate->pstate) {
 		int ret = nvkm_pstate_prog(clk, pstate);
 		if (ret) {
 			nvkm_error(subdev, "error setting pstate %d: %d\n",
@@ -610,7 +617,7 @@ nvkm_clk_init(struct nvkm_subdev *subdev)
 		return clk->func->init(clk);
 
 	clk->astate = clk->state_nr - 1;
-	clk->pstate = -1;
+	clk->pstate = NULL;
 	clk->temp = 90; /* reasonable default value */
 	nvkm_clk_update(clk, true);
 	return 0;
drm/nouveau/nvkm/subdev/pmu/gk20a.c +7 -11
index 05e81855..de579726 100644
@@ -55,24 +55,22 @@ gk20a_pmu_dvfs_target(struct gk20a_pmu *pmu, int *state)
 	return nvkm_clk_astate(clk, *state, 0, false);
 }
 
-static void
-gk20a_pmu_dvfs_get_cur_state(struct gk20a_pmu *pmu, int *state)
-{
-	struct nvkm_clk *clk = pmu->base.subdev.device->clk;
-
-	*state = clk->pstate;
-}
-
 static int
 gk20a_pmu_dvfs_get_target_state(struct gk20a_pmu *pmu,
 				int *state, int load)
 {
 	struct gk20a_pmu_dvfs_data *data = pmu->data;
 	struct nvkm_clk *clk = pmu->base.subdev.device->clk;
+	struct nvkm_pstate *pstate = clk->pstate;
 	int cur_level, level;
 
+	if (!pstate) {
+		*state = 0;
+		return 1;
+	}
+
 	/* For GK20A, the performance level is directly mapped to pstate */
-	level = cur_level = clk->pstate;
+	level = cur_level = clk->pstate->pstate;
 
 	if (load > data->p_load_max) {
 		level = min(clk->state_nr - 1, level + (clk->state_nr / 3));
@@ -142,8 +140,6 @@ gk20a_pmu_dvfs_work(struct nvkm_alarm *alarm)
 	nvkm_trace(subdev, "utilization = %d %%, avg_load = %d %%\n",
 		   utilization, data->avg_load);
 
-	gk20a_pmu_dvfs_get_cur_state(pmu, &state);
-
 	if (gk20a_pmu_dvfs_get_target_state(pmu, &state, data->avg_load)) {
 		nvkm_trace(subdev, "set new state to %d\n", state);
 		gk20a_pmu_dvfs_target(pmu, &state);
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20171008114733.ypjk3vyimyj3bt6i-WLoDKDh+7sdAfugRpC6u6w@public.gmane.org

#27 lore raw

Re: [RFC PATCH 06/29] clk: Make pstate a pointer to nvkm_pstate

Quoted 4 lines · Pierre Moreau

The patch seems fine but I found it super confusing that sometimes pstate is a pointer (for example clk->pstate), sometimes it is an int (for example args->v0.pstate).

yeah I still plan to clean the names up when I find some time to finish those patches for real

Quoted 93 lines · Karol Herbst
Quoted 78 lines

We will access the current cstate at least every second and this saves us some CPU cycles looking them up every second.

v2: Rewording commit message.

---
 drm/nouveau/include/nvkm/subdev/clk.h |  4 +++-
 drm/nouveau/nvkm/engine/device/ctrl.c |  5 ++++-
 drm/nouveau/nvkm/subdev/clk/base.c    | 17 ++++++++++++-----
 drm/nouveau/nvkm/subdev/pmu/gk20a.c   | 18 +++++++-----------
 4 files changed, 26 insertions(+), 18 deletions(-)
drm/nouveau/include/nvkm/subdev/clk.h +3 -1
index 1340f5b8..ec537e08 100644
@@ -10,6 +10,8 @@ struct nvkm_pll_vals;
 #define NVKM_CLK_CSTATE_BASE    -2 /* pstate base */
 #define NVKM_CLK_CSTATE_HIGHEST -3 /* highest possible */
 
+#define NVKM_CLK_PSTATE_DEFAULT -1
+
 enum nv_clk_src {
      nv_clk_src_crystal,
      nv_clk_src_href,
@@ -95,7 +97,7 @@ struct nvkm_clk {
 
      struct nvkm_notify pwrsrc_ntfy;
      int pwrsrc;
-     int pstate; /* current */
+     struct nvkm_pstate *pstate; /* current */
      int ustate_ac; /* user-requested (-1 disabled, -2 perfmon) */
      int ustate_dc; /* user-requested (-1 disabled, -2 perfmon) */
      int astate; /* perfmon adjustment (base) */
drm/nouveau/nvkm/engine/device/ctrl.c +4 -1
index b0ece71a..da70626c 100644
@@ -52,7 +52,10 @@ nvkm_control_mthd_pstate_info(struct nvkm_control *ctrl, void *data, u32 size)
              args->v0.ustate_ac = clk->ustate_ac;
              args->v0.ustate_dc = clk->ustate_dc;
              args->v0.pwrsrc = clk->pwrsrc;
-             args->v0.pstate = clk->pstate;
+             if (clk->pstate)
+                     args->v0.pstate = clk->pstate->pstate;
+             else
+                     args->v0.pstate = NVKM_CLK_PSTATE_DEFAULT;
      } else {
              args->v0.count = 0;
              args->v0.ustate_ac = NVIF_CONTROL_PSTATE_INFO_V0_USTATE_DISABLE;
drm/nouveau/nvkm/subdev/clk/base.c +4 -1
index 07d530ed..0d4d9fdf 100644
@@ -271,13 +271,16 @@ nvkm_pstate_prog(struct nvkm_clk *clk, int pstatei)
      struct nvkm_pstate *pstate;
      int ret, idx = 0;
 
+     if (pstatei == NVKM_CLK_PSTATE_DEFAULT)
+             return 0;
+
      list_for_each_entry(pstate, &clk->states, head) {
              if (idx++ == pstatei)
                      break;
      }
 
      nvkm_debug(subdev, "setting performance state %d\n", pstatei);
-     clk->pstate = pstatei;
+     clk->pstate = pstate;
 
      nvkm_pcie_set_link(pci, pstate->pcie_speed, pstate->pcie_width);
 
@@ -306,8 +309,12 @@ nvkm_clk_update_work(struct work_struct *work)
              return;
      clk->pwrsrc = power_supply_is_system_supplied();
 

drm/nouveau/nvkm/subdev/clk/base.c nvkm_clk_update_work(struct work_struct *work) · line 320

Quoted 10 lines
drm/nouveau/nvkm/subdev/clk/base.c +5 -1
+     if (clk->pstate)
+             pstate = clk->pstate->pstate;
+     else
+             pstate = NVKM_CLK_PSTATE_DEFAULT;
      nvkm_trace(subdev, "P %d PWR %d U(AC) %d U(DC) %d A %d T %d°C\n",
-                clk->pstate, clk->pwrsrc, clk->ustate_ac, clk->ustate_dc,
+                pstate, clk->pwrsrc, clk->ustate_ac, clk->ustate_dc,
                 clk->astate, clk->temp);
 
      pstate = clk->pwrsrc ? clk->ustate_ac : clk->ustate_dc;

In the if-statement following the previous line, the -1 could be replaced by NVKM_CLK_PSTATE_DEFAULT.

Quoted 4 lines

drm/nouveau/nvkm/subdev/clk/base.c nvkm_clk_update_work(struct work_struct *work) · line 322

Quoted 2 lines
drm/nouveau/nvkm/subdev/clk/base.c +0 -0
@@ -315,11 +322,11 @@ nvkm_clk_update_work(struct work_struct *work)
              pstate = (pstate < 0) ? clk->astate : pstate;

Can pstate have negative values other than -1?

not yet, but >=0 means a pstate is selected by an id, <0 but a type, but it might be that we'll never need more than the default one.

Quoted 10 lines

drm/nouveau/nvkm/subdev/clk/base.c nvkm_clk_update_work(struct work_struct *work) · line 325

Quoted 5 lines
drm/nouveau/nvkm/subdev/clk/base.c +1 -1
              pstate = min(pstate, clk->state_nr - 1);
      } else {
-             pstate = clk->pstate = -1;
+             pstate = NVKM_CLK_PSTATE_DEFAULT;

Shouldn’t you also reset clk->pstate to NULL? Or maybe it is nvkm_pstate_prog() which should do it if
pstatei == NVKM_CLK_PSTATE_DEFAULT.

no. We can't go back to the default clocks except we run devinit again. Default means: state after powering on the GPU. and clk->pstate points to the current pstate we reclocked to last. Which means if we hit the else branch here, clk->pstate is already NULL.

Quoted 65 lines
Quoted 65 lines
drm/nouveau/nvkm/subdev/clk/base.c +2 -2
      }
 
      nvkm_trace(subdev, "-> %d\n", pstate);
-     if (pstate != clk->pstate) {
+     if (!clk->pstate || pstate != clk->pstate->pstate) {
              int ret = nvkm_pstate_prog(clk, pstate);
              if (ret) {
                      nvkm_error(subdev, "error setting pstate %d: %d\n",
@@ -610,7 +617,7 @@ nvkm_clk_init(struct nvkm_subdev *subdev)
              return clk->func->init(clk);
 
      clk->astate = clk->state_nr - 1;
-     clk->pstate = -1;
+     clk->pstate = NULL;
      clk->temp = 90; /* reasonable default value */
      nvkm_clk_update(clk, true);
      return 0;
drm/nouveau/nvkm/subdev/pmu/gk20a.c +7 -12
index 05e81855..de579726 100644
@@ -55,24 +55,22 @@ gk20a_pmu_dvfs_target(struct gk20a_pmu *pmu, int *state)
      return nvkm_clk_astate(clk, *state, 0, false);
 }
 
-static void
-gk20a_pmu_dvfs_get_cur_state(struct gk20a_pmu *pmu, int *state)
-{
-     struct nvkm_clk *clk = pmu->base.subdev.device->clk;
-
-     *state = clk->pstate;
-}
-
 static int
 gk20a_pmu_dvfs_get_target_state(struct gk20a_pmu *pmu,
                              int *state, int load)
 {
      struct gk20a_pmu_dvfs_data *data = pmu->data;
      struct nvkm_clk *clk = pmu->base.subdev.device->clk;
+     struct nvkm_pstate *pstate = clk->pstate;
      int cur_level, level;
 
+     if (!pstate) {
+             *state = 0;
+             return 1;
+     }
+
      /* For GK20A, the performance level is directly mapped to pstate */
-     level = cur_level = clk->pstate;
+     level = cur_level = clk->pstate->pstate;
 
      if (load > data->p_load_max) {
              level = min(clk->state_nr - 1, level + (clk->state_nr / 3));
@@ -142,8 +140,6 @@ gk20a_pmu_dvfs_work(struct nvkm_alarm *alarm)
      nvkm_trace(subdev, "utilization = %d %%, avg_load = %d %%\n",
                 utilization, data->avg_load);
 
-     gk20a_pmu_dvfs_get_cur_state(pmu, &state);
-
      if (gk20a_pmu_dvfs_get_target_state(pmu, &state, data->avg_load)) {
              nvkm_trace(subdev, "set new state to %d\n", state);
              gk20a_pmu_dvfs_target(pmu, &state);
--

2.14.1

Quoted 4 lines
Quoted 4 lines

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

#28 lore raw

RFC PATCH 7/29 clk: Hold information about the current cstate status

In reply to a message not in the archive

Later we will have situations where the expected and the current state isn't the same.

---
 drm/nouveau/include/nvkm/subdev/clk.h |  2 ++
 drm/nouveau/nvkm/subdev/clk/base.c    | 32 +++++++++++++++++++++++++-------
 2 files changed, 27 insertions(+), 7 deletions(-)
drm/nouveau/include/nvkm/subdev/clk.h +2 -0
index ec537e08..f35518c3 100644
@@ -101,6 +101,8 @@ struct nvkm_clk {
 	int ustate_ac; /* user-requested (-1 disabled, -2 perfmon) */
 	int ustate_dc; /* user-requested (-1 disabled, -2 perfmon) */
 	int astate; /* perfmon adjustment (base) */
+	struct nvkm_cstate *cstate;
+	int exp_cstateid;
 	u8  temp;
 
 	bool allow_reclock;
drm/nouveau/nvkm/subdev/clk/base.c +25 -7
index 0d4d9fdf..d37c13b7 100644
@@ -146,9 +146,14 @@ static struct nvkm_cstate *
 nvkm_cstate_get(struct nvkm_clk *clk, struct nvkm_pstate *pstate, int cstatei)
 {
 	struct nvkm_cstate *cstate;
-	if (cstatei == NVKM_CLK_CSTATE_HIGHEST)
+	switch (cstatei) {
+	case NVKM_CLK_CSTATE_HIGHEST:
 		return list_last_entry(&pstate->list, typeof(*cstate), head);
-	else {
+	case NVKM_CLK_CSTATE_BASE:
+		return &pstate->base;
+	case NVKM_CLK_CSTATE_DEFAULT:
+		return NULL;
+	default:
 		list_for_each_entry(cstate, &pstate->list, head) {
 			if (cstate->id == cstatei)
 				return cstate;
@@ -167,6 +172,9 @@ nvkm_cstate_prog(struct nvkm_clk *clk, struct nvkm_pstate *pstate, int cstatei)
 	struct nvkm_cstate *cstate;
 	int ret;
 
+	if (cstatei == NVKM_CLK_CSTATE_DEFAULT)
+		return 0;
+
 	if (!list_empty(&pstate->list)) {
 		cstate = nvkm_cstate_get(clk, pstate, cstatei);
 		cstate = nvkm_cstate_find_best(clk, pstate, cstate);
@@ -193,6 +201,7 @@ nvkm_cstate_prog(struct nvkm_clk *clk, struct nvkm_pstate *pstate, int cstatei)
 
 	ret = clk->func->calc(clk, cstate);
 	if (ret == 0) {
+		clk->cstate = cstate;
 		ret = clk->func->prog(clk);
 		clk->func->tidy(clk);
 	}
@@ -295,7 +304,7 @@ nvkm_pstate_prog(struct nvkm_clk *clk, int pstatei)
 		ram->func->tidy(ram);
 	}
 
-	return nvkm_cstate_prog(clk, pstate, NVKM_CLK_CSTATE_HIGHEST);
+	return nvkm_cstate_prog(clk, pstate, clk->exp_cstateid);
 }
 
 static void
@@ -313,9 +322,9 @@ nvkm_clk_update_work(struct work_struct *work)
 		pstate = clk->pstate->pstate;
 	else
 		pstate = NVKM_CLK_PSTATE_DEFAULT;
-	nvkm_trace(subdev, "P %d PWR %d U(AC) %d U(DC) %d A %d T %d°C\n",
+	nvkm_trace(subdev, "P %d PWR %d U(AC) %d U(DC) %d A %d C %d T %d°C\n",
 		   pstate, clk->pwrsrc, clk->ustate_ac, clk->ustate_dc,
-		   clk->astate, clk->temp);
+		   clk->astate, clk->exp_cstateid, clk->temp);
 
 	pstate = clk->pwrsrc ? clk->ustate_ac : clk->ustate_dc;
 	if (clk->state_nr && pstate != -1) {
@@ -536,6 +545,7 @@ nvkm_clk_ustate(struct nvkm_clk *clk, int req, int pwr)
 	if (ret >= 0) {
 		if (ret -= 2, pwr) clk->ustate_ac = ret;
 		else		   clk->ustate_dc = ret;
+		clk->exp_cstateid = NVKM_CLK_CSTATE_HIGHEST;
 		return nvkm_clk_update(clk, true);
 	}
 	return ret;
@@ -548,6 +558,7 @@ nvkm_clk_astate(struct nvkm_clk *clk, int req, int rel, bool wait)
 	if ( rel) clk->astate += rel;
 	clk->astate = min(clk->astate, clk->state_nr - 1);
 	clk->astate = max(clk->astate, 0);
+	clk->exp_cstateid = NVKM_CLK_CSTATE_BASE;
 	return nvkm_clk_update(clk, wait);
 }
 
@@ -618,6 +629,8 @@ nvkm_clk_init(struct nvkm_subdev *subdev)
 
 	clk->astate = clk->state_nr - 1;
 	clk->pstate = NULL;
+	clk->exp_cstateid = NVKM_CLK_CSTATE_DEFAULT;
+	clk->cstate = NULL;
 	clk->temp = 90; /* reasonable default value */
 	nvkm_clk_update(clk, true);
 	return 0;
@@ -701,15 +714,20 @@ nvkm_clk_ctor(const struct nvkm_clk_func *func, struct nvkm_device *device,
 	if (mode) {
 		clk->ustate_ac = nvkm_clk_nstate(clk, mode, arglen);
 		clk->ustate_dc = nvkm_clk_nstate(clk, mode, arglen);
+		clk->exp_cstateid = NVKM_CLK_CSTATE_HIGHEST;
 	}
 
 	mode = nvkm_stropt(device->cfgopt, "NvClkModeAC", &arglen);
-	if (mode)
+	if (mode) {
 		clk->ustate_ac = nvkm_clk_nstate(clk, mode, arglen);
+		clk->exp_cstateid = NVKM_CLK_CSTATE_HIGHEST;
+	}
 
 	mode = nvkm_stropt(device->cfgopt, "NvClkModeDC", &arglen);
-	if (mode)
+	if (mode) {
 		clk->ustate_dc = nvkm_clk_nstate(clk, mode, arglen);
+		clk->exp_cstateid = NVKM_CLK_CSTATE_HIGHEST;
+	}
 
 	clk->boost_mode = nvkm_longopt(device->cfgopt, "NvBoost",
 				       NVKM_CLK_BOOST_NONE);
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20170915171129.5009-8-karolherbst-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org

Acked-by
#30 lore raw

Re: [RFC PATCH 07/29] clk: Hold information about the current cstate status

Quoted 138 lines · Karol Herbst

Later we will have situations where the expected and the current state isn't the same.

---
 drm/nouveau/include/nvkm/subdev/clk.h |  2 ++
 drm/nouveau/nvkm/subdev/clk/base.c    | 32 +++++++++++++++++++++++++-------
 2 files changed, 27 insertions(+), 7 deletions(-)
drm/nouveau/include/nvkm/subdev/clk.h +2 -0
index ec537e08..f35518c3 100644
@@ -101,6 +101,8 @@ struct nvkm_clk {
 	int ustate_ac; /* user-requested (-1 disabled, -2 perfmon) */
 	int ustate_dc; /* user-requested (-1 disabled, -2 perfmon) */
 	int astate; /* perfmon adjustment (base) */
+	struct nvkm_cstate *cstate;
+	int exp_cstateid;
 	u8  temp;
 
 	bool allow_reclock;
drm/nouveau/nvkm/subdev/clk/base.c +25 -7
index 0d4d9fdf..d37c13b7 100644
@@ -146,9 +146,14 @@ static struct nvkm_cstate *
 nvkm_cstate_get(struct nvkm_clk *clk, struct nvkm_pstate *pstate, int cstatei)
 {
 	struct nvkm_cstate *cstate;
-	if (cstatei == NVKM_CLK_CSTATE_HIGHEST)
+	switch (cstatei) {
+	case NVKM_CLK_CSTATE_HIGHEST:
 		return list_last_entry(&pstate->list, typeof(*cstate), head);
-	else {
+	case NVKM_CLK_CSTATE_BASE:
+		return &pstate->base;
+	case NVKM_CLK_CSTATE_DEFAULT:
+		return NULL;
+	default:
 		list_for_each_entry(cstate, &pstate->list, head) {
 			if (cstate->id == cstatei)
 				return cstate;
@@ -167,6 +172,9 @@ nvkm_cstate_prog(struct nvkm_clk *clk, struct nvkm_pstate *pstate, int cstatei)
 	struct nvkm_cstate *cstate;
 	int ret;
 
+	if (cstatei == NVKM_CLK_CSTATE_DEFAULT)
+		return 0;
+
 	if (!list_empty(&pstate->list)) {
 		cstate = nvkm_cstate_get(clk, pstate, cstatei);
 		cstate = nvkm_cstate_find_best(clk, pstate, cstate);
@@ -193,6 +201,7 @@ nvkm_cstate_prog(struct nvkm_clk *clk, struct nvkm_pstate *pstate, int cstatei)
 
 	ret = clk->func->calc(clk, cstate);
 	if (ret == 0) {
+		clk->cstate = cstate;
 		ret = clk->func->prog(clk);
 		clk->func->tidy(clk);
 	}
@@ -295,7 +304,7 @@ nvkm_pstate_prog(struct nvkm_clk *clk, int pstatei)
 		ram->func->tidy(ram);
 	}
 
-	return nvkm_cstate_prog(clk, pstate, NVKM_CLK_CSTATE_HIGHEST);
+	return nvkm_cstate_prog(clk, pstate, clk->exp_cstateid);
 }
 
 static void
@@ -313,9 +322,9 @@ nvkm_clk_update_work(struct work_struct *work)
 		pstate = clk->pstate->pstate;
 	else
 		pstate = NVKM_CLK_PSTATE_DEFAULT;
-	nvkm_trace(subdev, "P %d PWR %d U(AC) %d U(DC) %d A %d T %d°C\n",
+	nvkm_trace(subdev, "P %d PWR %d U(AC) %d U(DC) %d A %d C %d T %d°C\n",
 		   pstate, clk->pwrsrc, clk->ustate_ac, clk->ustate_dc,
-		   clk->astate, clk->temp);
+		   clk->astate, clk->exp_cstateid, clk->temp);
 
 	pstate = clk->pwrsrc ? clk->ustate_ac : clk->ustate_dc;
 	if (clk->state_nr && pstate != -1) {
@@ -536,6 +545,7 @@ nvkm_clk_ustate(struct nvkm_clk *clk, int req, int pwr)
 	if (ret >= 0) {
 		if (ret -= 2, pwr) clk->ustate_ac = ret;
 		else		   clk->ustate_dc = ret;
+		clk->exp_cstateid = NVKM_CLK_CSTATE_HIGHEST;
 		return nvkm_clk_update(clk, true);
 	}
 	return ret;
@@ -548,6 +558,7 @@ nvkm_clk_astate(struct nvkm_clk *clk, int req, int rel, bool wait)
 	if ( rel) clk->astate += rel;
 	clk->astate = min(clk->astate, clk->state_nr - 1);
 	clk->astate = max(clk->astate, 0);
+	clk->exp_cstateid = NVKM_CLK_CSTATE_BASE;
 	return nvkm_clk_update(clk, wait);
 }
 
@@ -618,6 +629,8 @@ nvkm_clk_init(struct nvkm_subdev *subdev)
 
 	clk->astate = clk->state_nr - 1;
 	clk->pstate = NULL;
+	clk->exp_cstateid = NVKM_CLK_CSTATE_DEFAULT;
+	clk->cstate = NULL;
 	clk->temp = 90; /* reasonable default value */
 	nvkm_clk_update(clk, true);
 	return 0;
@@ -701,15 +714,20 @@ nvkm_clk_ctor(const struct nvkm_clk_func *func, struct nvkm_device *device,
 	if (mode) {
 		clk->ustate_ac = nvkm_clk_nstate(clk, mode, arglen);
 		clk->ustate_dc = nvkm_clk_nstate(clk, mode, arglen);
+		clk->exp_cstateid = NVKM_CLK_CSTATE_HIGHEST;
 	}
 
 	mode = nvkm_stropt(device->cfgopt, "NvClkModeAC", &arglen);
-	if (mode)
+	if (mode) {
 		clk->ustate_ac = nvkm_clk_nstate(clk, mode, arglen);
+		clk->exp_cstateid = NVKM_CLK_CSTATE_HIGHEST;
+	}
 
 	mode = nvkm_stropt(device->cfgopt, "NvClkModeDC", &arglen);
-	if (mode)
+	if (mode) {
 		clk->ustate_dc = nvkm_clk_nstate(clk, mode, arglen);
+		clk->exp_cstateid = NVKM_CLK_CSTATE_HIGHEST;
+	}
 
 	clk->boost_mode = nvkm_longopt(device->cfgopt, "NvBoost",
 				       NVKM_CLK_BOOST_NONE);
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

#31 lore raw

RFC PATCH 8/29 clk: We should pass the pstate id around not the index in the list

In reply to a message not in the archive

This makes the code easier, because we can compare the id with pstate->pstate and saves us from the trouble of iterating over the pstates to match the index.

v2: reword commit message

---
 drm/nouveau/nouveau_debugfs.c      |  6 +--
 drm/nouveau/nvkm/subdev/clk/base.c | 78 +++++++++++++++++++-------------------
 2 files changed, 41 insertions(+), 43 deletions(-)
drm/nouveau/nouveau_debugfs.c +3 -3
index 963a4dba..27281c4e 100644
@@ -96,11 +96,11 @@ nouveau_debugfs_pstate_get(struct seq_file *m, void *data)
 		} while (attr.index);
 
 		if (state >= 0) {
-			if (info.ustate_ac == state)
+			if (info.ustate_ac == attr.state)
 				seq_printf(m, " AC");
-			if (info.ustate_dc == state)
+			if (info.ustate_dc == attr.state)
 				seq_printf(m, " DC");
-			if (info.pstate == state)
+			if (info.pstate == attr.state)
 				seq_printf(m, " *");
 		} else {
 			if (info.ustate_ac < -1)
drm/nouveau/nvkm/subdev/clk/base.c +38 -40

135 lines not on this page · raw message

Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20170915171129.5009-9-karolherbst-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org

#33 lore raw

Re: [RFC PATCH 08/29] clk: We should pass the pstate id around not the index in the list

Quoted 3 lines · Karol Herbst

This makes the code easier, because we can compare the id with pstate->pstate and saves us from the trouble of iterating over the pstates to match the index.

I don’t remember whether I have already done this comment before, but I am not sure where your iterating over the pstates savings are, as in this patch at least, you iterate as much as you did before.

A few more comments below

Quoted 112 lines

v2: reword commit message

---
 drm/nouveau/nouveau_debugfs.c      |  6 +--
 drm/nouveau/nvkm/subdev/clk/base.c | 78 +++++++++++++++++++-------------------
 2 files changed, 41 insertions(+), 43 deletions(-)
drm/nouveau/nouveau_debugfs.c +3 -3
index 963a4dba..27281c4e 100644
@@ -96,11 +96,11 @@ nouveau_debugfs_pstate_get(struct seq_file *m, void *data)
 		} while (attr.index);
 
 		if (state >= 0) {
-			if (info.ustate_ac == state)
+			if (info.ustate_ac == attr.state)
 				seq_printf(m, " AC");
-			if (info.ustate_dc == state)
+			if (info.ustate_dc == attr.state)
 				seq_printf(m, " DC");
-			if (info.pstate == state)
+			if (info.pstate == attr.state)
 				seq_printf(m, " *");
 		} else {
 			if (info.ustate_ac < -1)
drm/nouveau/nvkm/subdev/clk/base.c +9 -31
index d37c13b7..1d71bf09 100644
@@ -272,23 +272,26 @@ nvkm_cstate_new(struct nvkm_clk *clk, int idx, struct nvkm_pstate *pstate)
  * P-States
  *****************************************************************************/
 static int
-nvkm_pstate_prog(struct nvkm_clk *clk, int pstatei)
+nvkm_pstate_prog(struct nvkm_clk *clk, int pstateid)
 {
 	struct nvkm_subdev *subdev = &clk->subdev;
 	struct nvkm_fb *fb = subdev->device->fb;
 	struct nvkm_pci *pci = subdev->device->pci;
 	struct nvkm_pstate *pstate;
-	int ret, idx = 0;
+	int ret;
 
-	if (pstatei == NVKM_CLK_PSTATE_DEFAULT)
+	if (pstateid == NVKM_CLK_PSTATE_DEFAULT)
 		return 0;
 
 	list_for_each_entry(pstate, &clk->states, head) {
-		if (idx++ == pstatei)
+		if (pstate->pstate == pstateid)
 			break;
 	}
 
-	nvkm_debug(subdev, "setting performance state %d\n", pstatei);
+	if (!pstate)
+		return -EINVAL;
+
+	nvkm_debug(subdev, "setting performance state %x\n", pstateid);
 	clk->pstate = pstate;
 
 	nvkm_pcie_set_link(pci, pstate->pcie_speed, pstate->pcie_width);
@@ -329,7 +332,6 @@ nvkm_clk_update_work(struct work_struct *work)
 	pstate = clk->pwrsrc ? clk->ustate_ac : clk->ustate_dc;
 	if (clk->state_nr && pstate != -1) {
 		pstate = (pstate < 0) ? clk->astate : pstate;
-		pstate = min(pstate, clk->state_nr - 1);
 	} else {
 		pstate = NVKM_CLK_PSTATE_DEFAULT;
 	}
@@ -490,33 +492,10 @@ nvkm_pstate_new(struct nvkm_clk *clk, int idx)
 /******************************************************************************
  * Adjustment triggers
  *****************************************************************************/
-static int
-nvkm_clk_ustate_update(struct nvkm_clk *clk, int req)
-{
-	struct nvkm_pstate *pstate;
-	int i = 0;
-
-	if (!clk->allow_reclock)
-		return -ENOSYS;
-
-	if (req != -1 && req != -2) {
-		list_for_each_entry(pstate, &clk->states, head) {
-			if (pstate->pstate == req)
-				break;
-			i++;
-		}
-
-		if (pstate->pstate != req)
-			return -EINVAL;
-		req = i;
-	}
-
-	return req + 2;
-}
-
 static int
 nvkm_clk_nstate(struct nvkm_clk *clk, const char *mode, int arglen)
 {
+	struct nvkm_pstate *pstate;
 	int ret = 1;
 
 	if (clk->allow_reclock && !strncasecmpz(mode, "auto", arglen))
@@ -528,27 +507,46 @@ nvkm_clk_nstate(struct nvkm_clk *clk, const char *mode, int arglen)
 
 		((char *)mode)[arglen] = '\0';
 		if (!kstrtol(mode, 0, &v)) {
-			ret = nvkm_clk_ustate_update(clk, v);

drm/nouveau/nvkm/subdev/clk/base.c nvkm_clk_nstate(struct nvkm_clk *clk, const char *mode, int arglen) · line 518

Quoted 10 lines
drm/nouveau/nvkm/subdev/clk/base.c +3 -1
+			ret = v;
 			if (ret < 0)
 				ret = 1;
 		}
 		((char *)mode)[arglen] = save;
 	}
 
-	return ret - 2;
+	if (ret < 0)
+		return ret;

Don’t you need to check for clk->allow_reclock, as it was done in nvkm_clk_ustate_update()?

Quoted 9 lines
drm/nouveau/nvkm/subdev/clk/base.c +6 -0
+
+	list_for_each_entry(pstate, &clk->states, head) {
+		if (pstate->pstate == ret)
+			return ret;
+	}
+	return -EINVAL;
 }
 
 int

drm/nouveau/nvkm/subdev/clk/base.c nvkm_clk_nstate(struct nvkm_clk *clk, const char *mode, int arglen) · line 531

Quoted 10 lines
drm/nouveau/nvkm/subdev/clk/base.c +2 -6
 nvkm_clk_ustate(struct nvkm_clk *clk, int req, int pwr)
 {
-	int ret = nvkm_clk_ustate_update(clk, req);
-	if (ret >= 0) {
-		if (ret -= 2, pwr) clk->ustate_ac = ret;
-		else		   clk->ustate_dc = ret;
-		clk->exp_cstateid = NVKM_CLK_CSTATE_HIGHEST;
-		return nvkm_clk_update(clk, true);
+	struct nvkm_pstate *pstate;
+	bool valid = false;

Same here, don’t you need to check for clk->allow_reclock, as it was done in nvkm_clk_ustate_update()?

Quoted 38 lines
drm/nouveau/nvkm/subdev/clk/base.c +18 -2
+
+	list_for_each_entry(pstate, &clk->states, head) {
+		if (pstate->pstate == req) {
+			valid = true;
+			break;
+		}
 	}
-	return ret;
+
+	if (!valid)
+		return -EINVAL;
+
+	if (pwr)
+		clk->ustate_ac = req;
+	else
+		clk->ustate_dc = req;
+
+	clk->exp_cstateid = NVKM_CLK_CSTATE_HIGHEST;
+	return nvkm_clk_update(clk, true);
 }
 
 int
@@ -627,7 +625,7 @@ nvkm_clk_init(struct nvkm_subdev *subdev)
 	if (clk->func->init)
 		return clk->func->init(clk);
 
-	clk->astate = clk->state_nr - 1;
+	clk->astate = NVKM_CLK_PSTATE_DEFAULT;
 	clk->pstate = NULL;
 	clk->exp_cstateid = NVKM_CLK_CSTATE_DEFAULT;
 	clk->cstate = NULL;
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20171008142323.ybxla2z2yqsd6wfk-WLoDKDh+7sdAfugRpC6u6w@public.gmane.org

#35 lore raw

Re: [RFC PATCH 08/29] clk: We should pass the pstate id around not the index in the list

Quoted 9 lines · Pierre Moreau
Quoted 3 lines · Karol Herbst

This makes the code easier, because we can compare the id with pstate->pstate and saves us from the trouble of iterating over the pstates to match the index.

I don’t remember whether I have already done this comment before, but I am not sure where your iterating over the pstates savings are, as in this patch at least, you iterate as much as you did before.

yeah I think I ended up adding one loop again to check whether the input was actual an existing pstate or not, but it shouldn't be needed anymore. It was required before, now it's only there for error checking.

Quoted 121 lines

A few more comments below

Quoted 119 lines

v2: reword commit message

---
 drm/nouveau/nouveau_debugfs.c      |  6 +--
 drm/nouveau/nvkm/subdev/clk/base.c | 78 +++++++++++++++++++-------------------
 2 files changed, 41 insertions(+), 43 deletions(-)
drm/nouveau/nouveau_debugfs.c +3 -3
index 963a4dba..27281c4e 100644
@@ -96,11 +96,11 @@ nouveau_debugfs_pstate_get(struct seq_file *m, void *data)
              } while (attr.index);
 
              if (state >= 0) {
-                     if (info.ustate_ac == state)
+                     if (info.ustate_ac == attr.state)
                              seq_printf(m, " AC");
-                     if (info.ustate_dc == state)
+                     if (info.ustate_dc == attr.state)
                              seq_printf(m, " DC");
-                     if (info.pstate == state)
+                     if (info.pstate == attr.state)
                              seq_printf(m, " *");
              } else {
                      if (info.ustate_ac < -1)
drm/nouveau/nvkm/subdev/clk/base.c +10 -31
index d37c13b7..1d71bf09 100644
@@ -272,23 +272,26 @@ nvkm_cstate_new(struct nvkm_clk *clk, int idx, struct nvkm_pstate *pstate)
  * P-States
  *****************************************************************************/
 static int
-nvkm_pstate_prog(struct nvkm_clk *clk, int pstatei)
+nvkm_pstate_prog(struct nvkm_clk *clk, int pstateid)
 {
      struct nvkm_subdev *subdev = &clk->subdev;
      struct nvkm_fb *fb = subdev->device->fb;
      struct nvkm_pci *pci = subdev->device->pci;
      struct nvkm_pstate *pstate;
-     int ret, idx = 0;
+     int ret;
 
-     if (pstatei == NVKM_CLK_PSTATE_DEFAULT)
+     if (pstateid == NVKM_CLK_PSTATE_DEFAULT)
              return 0;
 
      list_for_each_entry(pstate, &clk->states, head) {
-             if (idx++ == pstatei)
+             if (pstate->pstate == pstateid)
                      break;
      }
 
-     nvkm_debug(subdev, "setting performance state %d\n", pstatei);
+     if (!pstate)
+             return -EINVAL;
+
+     nvkm_debug(subdev, "setting performance state %x\n", pstateid);
      clk->pstate = pstate;
 
      nvkm_pcie_set_link(pci, pstate->pcie_speed, pstate->pcie_width);
@@ -329,7 +332,6 @@ nvkm_clk_update_work(struct work_struct *work)
      pstate = clk->pwrsrc ? clk->ustate_ac : clk->ustate_dc;
      if (clk->state_nr && pstate != -1) {
              pstate = (pstate < 0) ? clk->astate : pstate;
-             pstate = min(pstate, clk->state_nr - 1);
      } else {
              pstate = NVKM_CLK_PSTATE_DEFAULT;
      }
@@ -490,33 +492,10 @@ nvkm_pstate_new(struct nvkm_clk *clk, int idx)
 /******************************************************************************
  * Adjustment triggers
  *****************************************************************************/
-static int
-nvkm_clk_ustate_update(struct nvkm_clk *clk, int req)
-{
-     struct nvkm_pstate *pstate;
-     int i = 0;
-
-     if (!clk->allow_reclock)
-             return -ENOSYS;
-
-     if (req != -1 && req != -2) {
-             list_for_each_entry(pstate, &clk->states, head) {
-                     if (pstate->pstate == req)
-                             break;
-                     i++;
-             }
-
-             if (pstate->pstate != req)
-                     return -EINVAL;
-             req = i;
-     }
-
-     return req + 2;
-}
-
 static int
 nvkm_clk_nstate(struct nvkm_clk *clk, const char *mode, int arglen)
 {
+     struct nvkm_pstate *pstate;
      int ret = 1;
 
      if (clk->allow_reclock && !strncasecmpz(mode, "auto", arglen))
@@ -528,27 +507,46 @@ nvkm_clk_nstate(struct nvkm_clk *clk, const char *mode, int arglen)
 
              ((char *)mode)[arglen] = '\0';
              if (!kstrtol(mode, 0, &v)) {
-                     ret = nvkm_clk_ustate_update(clk, v);
+                     ret = v;
                      if (ret < 0)
                              ret = 1;
              }
              ((char *)mode)[arglen] = save;
      }
 
Quoted 7 lines

drm/nouveau/nvkm/subdev/clk/base.c nvkm_clk_nstate(struct nvkm_clk *clk, const char *mode, int arglen) · line 518

Quoted 3 lines
drm/nouveau/nvkm/subdev/clk/base.c +2 -1
-     return ret - 2;
+     if (ret < 0)
+             return ret;

Don’t you need to check for clk->allow_reclock, as it was done in nvkm_clk_ustate_update()?

well ret ended up being 1 due to that check inside nvkm_clk_ustate_update.

Quoted 57 lines
Quoted 9 lines
drm/nouveau/nvkm/subdev/clk/base.c +6 -0
+
+     list_for_each_entry(pstate, &clk->states, head) {
+             if (pstate->pstate == ret)
+                     return ret;
+     }
+     return -EINVAL;
 }
 
 int

drm/nouveau/nvkm/subdev/clk/base.c nvkm_clk_nstate(struct nvkm_clk *clk, const char *mode, int arglen) · line 531

Quoted 10 lines
drm/nouveau/nvkm/subdev/clk/base.c +2 -6
 nvkm_clk_ustate(struct nvkm_clk *clk, int req, int pwr)
 {
-     int ret = nvkm_clk_ustate_update(clk, req);
-     if (ret >= 0) {
-             if (ret -= 2, pwr) clk->ustate_ac = ret;
-             else               clk->ustate_dc = ret;
-             clk->exp_cstateid = NVKM_CLK_CSTATE_HIGHEST;
-             return nvkm_clk_update(clk, true);
+     struct nvkm_pstate *pstate;
+     bool valid = false;

Same here, don’t you need to check for clk->allow_reclock, as it was done in nvkm_clk_ustate_update()?

Quoted 34 lines
drm/nouveau/nvkm/subdev/clk/base.c +18 -3
+
+     list_for_each_entry(pstate, &clk->states, head) {
+             if (pstate->pstate == req) {
+                     valid = true;
+                     break;
+             }
      }
-     return ret;
+
+     if (!valid)
+             return -EINVAL;
+
+     if (pwr)
+             clk->ustate_ac = req;
+     else
+             clk->ustate_dc = req;
+
+     clk->exp_cstateid = NVKM_CLK_CSTATE_HIGHEST;
+     return nvkm_clk_update(clk, true);
 }
 
 int
@@ -627,7 +625,7 @@ nvkm_clk_init(struct nvkm_subdev *subdev)
      if (clk->func->init)
              return clk->func->init(clk);
 
-     clk->astate = clk->state_nr - 1;
+     clk->astate = NVKM_CLK_PSTATE_DEFAULT;
      clk->pstate = NULL;
      clk->exp_cstateid = NVKM_CLK_CSTATE_DEFAULT;
      clk->cstate = NULL;
--

2.14.1

Quoted 4 lines
Quoted 4 lines

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

#36 lore raw

RFC PATCH 9/29 clk: Set clocks to pre suspend state after suspend

In reply to a message not in the archive

The idea is to clear out the saved state, because after a resume we can't know what the GPU is clocked to. The reclock is triggered by the call to nvkm_clk_update later in nvkm_clk_init.

v2: convert to C style comments

---
 drm/nouveau/nvkm/subdev/clk/base.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drm/nouveau/nvkm/subdev/clk/base.c +7 -3
index 1d71bf09..54188d2b 100644
@@ -625,11 +625,10 @@ nvkm_clk_init(struct nvkm_subdev *subdev)
 	if (clk->func->init)
 		return clk->func->init(clk);
 
-	clk->astate = NVKM_CLK_PSTATE_DEFAULT;
+	/* after a resume we have no idea what clocks are set, reset the state
+	 */
 	clk->pstate = NULL;
-	clk->exp_cstateid = NVKM_CLK_CSTATE_DEFAULT;
 	clk->cstate = NULL;
-	clk->temp = 90; /* reasonable default value */
 	nvkm_clk_update(clk, true);
 	return 0;
 }
@@ -683,8 +682,13 @@ nvkm_clk_ctor(const struct nvkm_clk_func *func, struct nvkm_device *device,
 	clk->func = func;
 	INIT_LIST_HEAD(&clk->states);
 	clk->domains = func->domains;
+
+	clk->astate = NVKM_CLK_PSTATE_DEFAULT;
 	clk->ustate_ac = -1;
 	clk->ustate_dc = -1;
+	clk->exp_cstateid = NVKM_CLK_CSTATE_DEFAULT;
+	clk->temp = 90; /* reasonable default value */
+
 	clk->allow_reclock = allow_reclock;
 
 	INIT_WORK(&clk->work, nvkm_clk_update_work);
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20170915171129.5009-10-karolherbst-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org

Reviewed-by
#38 lore raw

Re: [RFC PATCH 09/29] clk: Set clocks to pre suspend state after suspend

Quoted 51 lines · Karol Herbst

The idea is to clear out the saved state, because after a resume we can't know what the GPU is clocked to. The reclock is triggered by the call to nvkm_clk_update later in nvkm_clk_init.

v2: convert to C style comments

---
 drm/nouveau/nvkm/subdev/clk/base.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drm/nouveau/nvkm/subdev/clk/base.c +7 -3
index 1d71bf09..54188d2b 100644
@@ -625,11 +625,10 @@ nvkm_clk_init(struct nvkm_subdev *subdev)
 	if (clk->func->init)
 		return clk->func->init(clk);
 
-	clk->astate = NVKM_CLK_PSTATE_DEFAULT;
+	/* after a resume we have no idea what clocks are set, reset the state
+	 */
 	clk->pstate = NULL;
-	clk->exp_cstateid = NVKM_CLK_CSTATE_DEFAULT;
 	clk->cstate = NULL;
-	clk->temp = 90; /* reasonable default value */
 	nvkm_clk_update(clk, true);
 	return 0;
 }
@@ -683,8 +682,13 @@ nvkm_clk_ctor(const struct nvkm_clk_func *func, struct nvkm_device *device,
 	clk->func = func;
 	INIT_LIST_HEAD(&clk->states);
 	clk->domains = func->domains;
+
+	clk->astate = NVKM_CLK_PSTATE_DEFAULT;
 	clk->ustate_ac = -1;
 	clk->ustate_dc = -1;
+	clk->exp_cstateid = NVKM_CLK_CSTATE_DEFAULT;
+	clk->temp = 90; /* reasonable default value */
+
 	clk->allow_reclock = allow_reclock;
 
 	INIT_WORK(&clk->work, nvkm_clk_update_work);
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

#39 lore raw

RFC PATCH 10/29 core/device: Move therm behind clk

In reply to a message not in the archive

Later therm will depend on clk reporting new temperatures and triggereing reclocks for thermal throttling or therm related voltage/clock adjustments.

---
 drm/nouveau/include/nvkm/core/device.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drm/nouveau/include/nvkm/core/device.h +1 -1
index bb4c214f..44a99c3c 100644
@@ -24,8 +24,8 @@ enum nvkm_devidx {
 	NVKM_SUBDEV_PMU,
 	NVKM_SUBDEV_VOLT,
 	NVKM_SUBDEV_ICCSENSE,
-	NVKM_SUBDEV_THERM,
 	NVKM_SUBDEV_CLK,
+	NVKM_SUBDEV_THERM,
 	NVKM_SUBDEV_SECBOOT,
 
 	NVKM_ENGINE_BSP,
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau
#40 lore raw

RFC PATCH 11/29 debugfs: Wake up GPU before doing any reclocking

In reply to a message not in the archive

Fixes various reclocking related issues on prime systems

---
 drm/nouveau/nouveau_debugfs.c | 4 ++++
 1 file changed, 4 insertions(+)
drm/nouveau/nouveau_debugfs.c +4 -0
index 27281c4e..b0a598f9 100644
@@ -160,7 +160,11 @@ nouveau_debugfs_pstate_set(struct file *file, const char __user *ubuf,
 		args.ustate = value;
 	}
 
+	ret = pm_runtime_get_sync(drm->dev);
+	if (IS_ERR_VALUE(ret) && ret != -EACCES)
+		return ret;
 	ret = nvif_mthd(ctrl, NVIF_CONTROL_PSTATE_USER, &args, sizeof(args));
+	pm_runtime_put_autosuspend(drm->dev);
 	if (ret < 0)
 		return ret;
 
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau
#41 lore raw

RFC PATCH 12/29 therm: Don't cancel the timer

In reply to a message not in the archive

We will need a always running therm daemon to adjust the voltage/clocks on the fly.

---
 drm/nouveau/nvkm/subdev/therm/base.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)
drm/nouveau/nvkm/subdev/therm/base.c +2 -7
index 8fa691fb..4e69cd8e 100644
@@ -114,7 +114,6 @@ nvkm_therm_update(struct nvkm_therm *therm, int mode)
 	struct nvkm_timer *tmr = subdev->device->timer;
 	unsigned long flags;
 	bool immd = true;
-	bool poll = true;
 	int duty = -1;
 
 	spin_lock_irqsave(&therm->lock, flags);
@@ -124,11 +123,9 @@ nvkm_therm_update(struct nvkm_therm *therm, int mode)
 
 	switch (mode) {
 	case NVKM_THERM_CTRL_MANUAL:
-		nvkm_timer_alarm(tmr, 0, &therm->alarm);
 		duty = nvkm_therm_fan_get(therm);
 		if (duty < 0)
 			duty = 100;
-		poll = false;
 		break;
 	case NVKM_THERM_CTRL_AUTO:
 		switch(therm->fan->bios.fan_mode) {
@@ -143,18 +140,16 @@ nvkm_therm_update(struct nvkm_therm *therm, int mode)
 				duty = therm->cstate;
 			else
 				duty = nvkm_therm_update_linear_fallback(therm);
-			poll = false;
 			break;
 		}
 		immd = false;
 		break;
 	case NVKM_THERM_CTRL_NONE:
 	default:
-		nvkm_timer_alarm(tmr, 0, &therm->alarm);
-		poll = false;
+		break;
 	}
 
-	if (poll)
+	if (list_empty(&therm->alarm.head))
 		nvkm_timer_alarm(tmr, 1000000000ULL, &therm->alarm);
 	spin_unlock_irqrestore(&therm->lock, flags);
 
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau
#42 lore raw

RFC PATCH 13/29 therm: Move the temp readout into the alarm

In reply to a message not in the archive

It makes more sense to read out the temperature in the alarm, because we want to do various things with it:
1. adjust the fans
2. notify the clk subdev about the changed temperature

---
 drm/nouveau/include/nvkm/subdev/therm.h |  1 +
 drm/nouveau/nvkm/subdev/therm/base.c    | 43 +++++++++++++++------------------
 2 files changed, 21 insertions(+), 23 deletions(-)
drm/nouveau/include/nvkm/subdev/therm.h +1 -0
index 8c84017f..27670497 100644
@@ -56,6 +56,7 @@ struct nvkm_therm {
 	int mode;
 	int cstate;
 	int suspend;
+	u8  last_temp;
 
 	/* bios */
 	struct nvbios_therm_sensor bios_sensor;
drm/nouveau/nvkm/subdev/therm/base.c +20 -23

125 lines not on this page · raw message

Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau
#43 lore raw

RFC PATCH 14/29 therm: Trigger reclock in temperature daemon

In reply to a message not in the archive

Depending on the temperature, cstates might become unreachable or the maped voltage of a cstate changes. We want to adjust to that.

---
 drm/nouveau/nvkm/subdev/therm/base.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drm/nouveau/nvkm/subdev/therm/base.c +8 -0
index 59f01fec..c90b9cfc 100644
@@ -23,6 +23,8 @@
  */
 #include "priv.h"
 
+#include <subdev/clk.h>
+
 int
 nvkm_therm_temp_get(struct nvkm_therm *therm, int *val)
 {
@@ -168,9 +170,15 @@ nvkm_therm_alarm(struct nvkm_alarm *alarm)
 	int temp;
 	struct nvkm_therm *therm =
 	       container_of(alarm, struct nvkm_therm, alarm);
+	struct nvkm_clk *clk = therm->subdev.device->clk;
+
 	if (nvkm_therm_temp_get(therm, &temp) >= 0)
 		therm->last_temp = temp;
+
 	nvkm_therm_update(therm, therm->last_temp, -1);
+
+	if (clk)
+		nvkm_clk_tstate(clk, therm->last_temp);
 }
 
 int
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20170915171129.5009-15-karolherbst-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org

Reviewed-by
#45 lore raw

Re: [RFC PATCH 14/29] therm: Trigger reclock in temperature daemon

Quoted 45 lines · Karol Herbst

Depending on the temperature, cstates might become unreachable or the maped voltage of a cstate changes. We want to adjust to that.

---
 drm/nouveau/nvkm/subdev/therm/base.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drm/nouveau/nvkm/subdev/therm/base.c +8 -0
index 59f01fec..c90b9cfc 100644
@@ -23,6 +23,8 @@
  */
 #include "priv.h"
 
+#include <subdev/clk.h>
+
 int
 nvkm_therm_temp_get(struct nvkm_therm *therm, int *val)
 {
@@ -168,9 +170,15 @@ nvkm_therm_alarm(struct nvkm_alarm *alarm)
 	int temp;
 	struct nvkm_therm *therm =
 	       container_of(alarm, struct nvkm_therm, alarm);
+	struct nvkm_clk *clk = therm->subdev.device->clk;
+
 	if (nvkm_therm_temp_get(therm, &temp) >= 0)
 		therm->last_temp = temp;
+
 	nvkm_therm_update(therm, therm->last_temp, -1);
+
+	if (clk)
+		nvkm_clk_tstate(clk, therm->last_temp);
 }
 
 int
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

#46 lore raw

RFC PATCH 15/29 bios: add thermal policies table

In reply to a message not in the archive
---
 .../include/nvkm/subdev/bios/thermal_policies.h    | 27 ++++++++
 drm/nouveau/nvkm/subdev/bios/Kbuild                |  1 +
 drm/nouveau/nvkm/subdev/bios/thermal_policies.c    | 81 ++++++++++++++++++++++
 3 files changed, 109 insertions(+)
 create mode 100644 drm/nouveau/include/nvkm/subdev/bios/thermal_policies.h
 create mode 100644 drm/nouveau/nvkm/subdev/bios/thermal_policies.c
drm/nouveau/include/nvkm/subdev/bios/thermal_policies.h new file +27 -0
new file mode 100644
index 00000000..c9215fdd
@@ -0,0 +1,27 @@
+#ifndef __NVBIOS_THERMAL_POLICIES_H__
+#define __NVBIOS_THERMAL_POLICIES_H__
+
+struct nvbios_thermal_policies_header {
+	u32 offset;
+
+	u8 version;
+	u8 hlen;
+	u8 ecount;
+	u8 elen;
+};
+struct nvbios_thermal_policies_entry {
+	u8  mode;
+	u16 t0;
+	u16 t1;
+	u16 t2;
+	s16 down_offset;
+	s16 up_offset;
+};
+
+int nvbios_thermal_policies_parse(struct nvkm_bios *,
+				  struct nvbios_thermal_policies_header *);
+int nvbios_thermal_policies_entry(struct nvkm_bios *,
+				  struct nvbios_thermal_policies_header *,
+				  u8 idx,
+				  struct nvbios_thermal_policies_entry *);
+#endif
drm/nouveau/nvkm/subdev/bios/Kbuild +1 -0
index 6b4f1e06..38f31dd0 100644
@@ -30,6 +30,7 @@ nvkm-y += nvkm/subdev/bios/shadowramin.o
 nvkm-y += nvkm/subdev/bios/shadowrom.o
 nvkm-y += nvkm/subdev/bios/timing.o
 nvkm-y += nvkm/subdev/bios/therm.o
+nvkm-y += nvkm/subdev/bios/thermal_policies.o
 nvkm-y += nvkm/subdev/bios/vmap.o
 nvkm-y += nvkm/subdev/bios/volt.o
 nvkm-y += nvkm/subdev/bios/vpstate.o
drm/nouveau/nvkm/subdev/bios/thermal_policies.c new file +81 -0

81 lines not on this page · raw message

Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20170915171129.5009-16-karolherbst-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org

Acked-by
#48 lore raw

Re: [RFC PATCH 15/29] bios: add thermal policies table

Looking good. It would be nice to have some defines/enums for the different modes. Some comments about t0, t1 and t2 would be nice. I saw you are using t0 in patch 16, but I have no idea why use t0 rather than t1 or t2.

Otherwise,

Quoted 148 lines · Karol Herbst
---
 .../include/nvkm/subdev/bios/thermal_policies.h    | 27 ++++++++
 drm/nouveau/nvkm/subdev/bios/Kbuild                |  1 +
 drm/nouveau/nvkm/subdev/bios/thermal_policies.c    | 81 ++++++++++++++++++++++
 3 files changed, 109 insertions(+)
 create mode 100644 drm/nouveau/include/nvkm/subdev/bios/thermal_policies.h
 create mode 100644 drm/nouveau/nvkm/subdev/bios/thermal_policies.c
drm/nouveau/include/nvkm/subdev/bios/thermal_policies.h new file +27 -0
new file mode 100644
index 00000000..c9215fdd
@@ -0,0 +1,27 @@
+#ifndef __NVBIOS_THERMAL_POLICIES_H__
+#define __NVBIOS_THERMAL_POLICIES_H__
+
+struct nvbios_thermal_policies_header {
+	u32 offset;
+
+	u8 version;
+	u8 hlen;
+	u8 ecount;
+	u8 elen;
+};
+struct nvbios_thermal_policies_entry {
+	u8  mode;
+	u16 t0;
+	u16 t1;
+	u16 t2;
+	s16 down_offset;
+	s16 up_offset;
+};
+
+int nvbios_thermal_policies_parse(struct nvkm_bios *,
+				  struct nvbios_thermal_policies_header *);
+int nvbios_thermal_policies_entry(struct nvkm_bios *,
+				  struct nvbios_thermal_policies_header *,
+				  u8 idx,
+				  struct nvbios_thermal_policies_entry *);
+#endif
drm/nouveau/nvkm/subdev/bios/Kbuild +1 -0
index 6b4f1e06..38f31dd0 100644
@@ -30,6 +30,7 @@ nvkm-y += nvkm/subdev/bios/shadowramin.o
 nvkm-y += nvkm/subdev/bios/shadowrom.o
 nvkm-y += nvkm/subdev/bios/timing.o
 nvkm-y += nvkm/subdev/bios/therm.o
+nvkm-y += nvkm/subdev/bios/thermal_policies.o
 nvkm-y += nvkm/subdev/bios/vmap.o
 nvkm-y += nvkm/subdev/bios/volt.o
 nvkm-y += nvkm/subdev/bios/vpstate.o
drm/nouveau/nvkm/subdev/bios/thermal_policies.c new file +81 -0
new file mode 100644
index 00000000..5105194e
@@ -0,0 +1,81 @@
+/*
+ * Copyright 2017 Karol Herbst
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Karol Herbst
+ */
+#include <subdev/bios.h>
+#include <subdev/bios/bit.h>
+#include <subdev/bios/thermal_policies.h>
+
+static u32
+nvbios_thermal_policies_offset(struct nvkm_bios *b)
+{
+	struct bit_entry bit_P;
+
+	if (!bit_entry(b, 'P', &bit_P)) {
+		if (bit_P.version == 2 && bit_P.length >= 0x50)
+			return nvbios_rd32(b, bit_P.offset + 0x50);
+	}
+
+	return 0;
+}
+
+int
+nvbios_thermal_policies_parse(struct nvkm_bios *b, struct nvbios_thermal_policies_header *h)
+{
+	if (!h)
+		return -EINVAL;
+
+	h->offset = nvbios_thermal_policies_offset(b);
+	if (!h->offset)
+		return -ENODEV;
+
+	h->version = nvbios_rd08(b, h->offset);
+	switch (h->version) {
+	case 0x10:
+		h->hlen     = nvbios_rd08(b, h->offset + 0x1);
+		h->elen     = nvbios_rd08(b, h->offset + 0x2);
+		h->ecount   = nvbios_rd08(b, h->offset + 0x3);
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+int
+nvbios_thermal_policies_entry(struct nvkm_bios *b, struct nvbios_thermal_policies_header *h,
+		     u8 idx, struct nvbios_thermal_policies_entry *e)
+{
+	u32 offset;
+
+	if (!e || !h || idx > h->ecount)
+		return -EINVAL;
+
+	offset = h->offset + h->hlen + idx * h->elen;
+	e->mode = nvbios_rd08(b, offset);
+	e->t0 = nvbios_rd16(b, offset + 0x2);
+	e->t1 = nvbios_rd16(b, offset + 0x4);
+	e->t2 = nvbios_rd16(b, offset + 0x6);
+	e->down_offset = nvbios_rd16(b, offset + 0x12);
+	e->up_offset = nvbios_rd16(b, offset + 0x14);
+
+	return 0;
+}
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20171008184011.caivpkpoz2prju4c-WLoDKDh+7sdAfugRpC6u6w@public.gmane.org

#50 lore raw

Re: [RFC PATCH 15/29] bios: add thermal policies table

Quoted 4 lines · Pierre Moreau

Looking good. It would be nice to have some defines/enums for the different modes. Some comments about t0, t1 and t2 would be nice. I saw you are using t0 in patch 16, but I have no idea why use t0 rather than t1 or t2.

I think I will remove t1 and t2 for now, because I have no idea when they are used. I also have no idea what those modes are doing except changing things in a strange way. The only thing I know for sure is the mode == 1 case and the throttle limits. This table also defines how fast we should throttle, but for now, until we figure out more, we go with the jump to min immediately approach.

Quoted 148 lines

Otherwise,

Quoted 144 lines · Karol Herbst
---
 .../include/nvkm/subdev/bios/thermal_policies.h    | 27 ++++++++
 drm/nouveau/nvkm/subdev/bios/Kbuild                |  1 +
 drm/nouveau/nvkm/subdev/bios/thermal_policies.c    | 81 ++++++++++++++++++++++
 3 files changed, 109 insertions(+)
 create mode 100644 drm/nouveau/include/nvkm/subdev/bios/thermal_policies.h
 create mode 100644 drm/nouveau/nvkm/subdev/bios/thermal_policies.c
drm/nouveau/include/nvkm/subdev/bios/thermal_policies.h new file +27 -0
new file mode 100644
index 00000000..c9215fdd
@@ -0,0 +1,27 @@
+#ifndef __NVBIOS_THERMAL_POLICIES_H__
+#define __NVBIOS_THERMAL_POLICIES_H__
+
+struct nvbios_thermal_policies_header {
+     u32 offset;
+
+     u8 version;
+     u8 hlen;
+     u8 ecount;
+     u8 elen;
+};
+struct nvbios_thermal_policies_entry {
+     u8  mode;
+     u16 t0;
+     u16 t1;
+     u16 t2;
+     s16 down_offset;
+     s16 up_offset;
+};
+
+int nvbios_thermal_policies_parse(struct nvkm_bios *,
+                               struct nvbios_thermal_policies_header *);
+int nvbios_thermal_policies_entry(struct nvkm_bios *,
+                               struct nvbios_thermal_policies_header *,
+                               u8 idx,
+                               struct nvbios_thermal_policies_entry *);
+#endif
drm/nouveau/nvkm/subdev/bios/Kbuild +1 -0
index 6b4f1e06..38f31dd0 100644
@@ -30,6 +30,7 @@ nvkm-y += nvkm/subdev/bios/shadowramin.o
 nvkm-y += nvkm/subdev/bios/shadowrom.o
 nvkm-y += nvkm/subdev/bios/timing.o
 nvkm-y += nvkm/subdev/bios/therm.o
+nvkm-y += nvkm/subdev/bios/thermal_policies.o
 nvkm-y += nvkm/subdev/bios/vmap.o
 nvkm-y += nvkm/subdev/bios/volt.o
 nvkm-y += nvkm/subdev/bios/vpstate.o
drm/nouveau/nvkm/subdev/bios/thermal_policies.c new file +81 -1
new file mode 100644
index 00000000..5105194e
@@ -0,0 +1,81 @@
+/*
+ * Copyright 2017 Karol Herbst
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Karol Herbst
+ */
+#include <subdev/bios.h>
+#include <subdev/bios/bit.h>
+#include <subdev/bios/thermal_policies.h>
+
+static u32
+nvbios_thermal_policies_offset(struct nvkm_bios *b)
+{
+     struct bit_entry bit_P;
+
+     if (!bit_entry(b, 'P', &bit_P)) {
+             if (bit_P.version == 2 && bit_P.length >= 0x50)
+                     return nvbios_rd32(b, bit_P.offset + 0x50);
+     }
+
+     return 0;
+}
+
+int
+nvbios_thermal_policies_parse(struct nvkm_bios *b, struct nvbios_thermal_policies_header *h)
+{
+     if (!h)
+             return -EINVAL;
+
+     h->offset = nvbios_thermal_policies_offset(b);
+     if (!h->offset)
+             return -ENODEV;
+
+     h->version = nvbios_rd08(b, h->offset);
+     switch (h->version) {
+     case 0x10:
+             h->hlen     = nvbios_rd08(b, h->offset + 0x1);
+             h->elen     = nvbios_rd08(b, h->offset + 0x2);
+             h->ecount   = nvbios_rd08(b, h->offset + 0x3);
+             return 0;
+     default:
+             return -EINVAL;
+     }
+}
+
+int
+nvbios_thermal_policies_entry(struct nvkm_bios *b, struct nvbios_thermal_policies_header *h,
+                  u8 idx, struct nvbios_thermal_policies_entry *e)
+{
+     u32 offset;
+
+     if (!e || !h || idx > h->ecount)
+             return -EINVAL;
+
+     offset = h->offset + h->hlen + idx * h->elen;
+     e->mode = nvbios_rd08(b, offset);
+     e->t0 = nvbios_rd16(b, offset + 0x2);
+     e->t1 = nvbios_rd16(b, offset + 0x4);
+     e->t2 = nvbios_rd16(b, offset + 0x6);
+     e->down_offset = nvbios_rd16(b, offset + 0x12);
+     e->up_offset = nvbios_rd16(b, offset + 0x14);
+
+     return 0;
+}
--

2.14.1

Quoted 4 lines
Quoted 4 lines

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

#51 lore raw

RFC PATCH 16/29 clk: parse thermal policies for throttling thresholds

In reply to a message not in the archive

v2: use min_t

---
 drm/nouveau/include/nvkm/subdev/clk.h |  2 ++
 drm/nouveau/nvkm/subdev/clk/base.c    | 42 +++++++++++++++++++++++++++++++++++
 2 files changed, 44 insertions(+)
drm/nouveau/include/nvkm/subdev/clk.h +2 -0
index f35518c3..f5ff1fd9 100644
@@ -104,6 +104,8 @@ struct nvkm_clk {
 	struct nvkm_cstate *cstate;
 	int exp_cstateid;
 	u8  temp;
+	u8  max_temp;
+	u8  relax_temp;
 
 	bool allow_reclock;
 #define NVKM_CLK_BOOST_NONE 0x0
drm/nouveau/nvkm/subdev/clk/base.c +42 -0

60 lines not on this page · raw message

Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20170915171129.5009-17-karolherbst-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org

#53 lore raw

Re: [RFC PATCH 16/29] clk: parse thermal policies for throttling thresholds

Quoted 13 lines · Karol Herbst

v2: use min_t

---
 drm/nouveau/include/nvkm/subdev/clk.h |  2 ++
 drm/nouveau/nvkm/subdev/clk/base.c    | 42 +++++++++++++++++++++++++++++++++++
 2 files changed, 44 insertions(+)
drm/nouveau/include/nvkm/subdev/clk.h +0 -0
index f35518c3..f5ff1fd9 100644

drm/nouveau/include/nvkm/subdev/clk.h struct nvkm_clk { · line 108

Quoted 5 lines
drm/nouveau/include/nvkm/subdev/clk.h +2 -0
@@ -104,6 +104,8 @@ struct nvkm_clk {
 	struct nvkm_cstate *cstate;
 	int exp_cstateid;
 	u8  temp;
+	u8  max_temp;
+	u8  relax_temp;

I guess those should be int, similar to the changes you made in patch 1.

Quoted 19 lines
drm/nouveau/include/nvkm/subdev/clk.h +0 -0
 	bool allow_reclock;
 #define NVKM_CLK_BOOST_NONE 0x0
drm/nouveau/nvkm/subdev/clk/base.c +1 -0
index 54188d2b..54e14936 100644
@@ -27,6 +27,7 @@
 #include <subdev/bios/boost.h>
 #include <subdev/bios/cstep.h>
 #include <subdev/bios/perf.h>
+#include <subdev/bios/thermal_policies.h>
 #include <subdev/bios/vpstate.h>
 #include <subdev/fb.h>
 #include <subdev/therm.h>
@@ -659,6 +660,44 @@ nvkm_clk = {
 	.fini = nvkm_clk_fini,
 };
 

drm/nouveau/nvkm/subdev/clk/base.c nvkm_clk = { · line 672

Quoted 10 lines
drm/nouveau/nvkm/subdev/clk/base.c +10 -0
+static void
+nvkm_clk_parse_max_temp(struct nvkm_clk *clk)
+{
+	struct nvkm_subdev *subdev = &clk->subdev;
+	struct nvkm_bios *bios = subdev->device->bios;
+	struct nvbios_thermal_policies_header header;
+	struct nvbios_thermal_policies_entry entry;
+	u8 i;
+	s16 mt = 0xff;
+	s16 rt = 0xff;

Why 0xff? I mean, sure, there is a high possibility that the GPU won’t like temperatures above 255℃, but still.

Quoted 48 lines
drm/nouveau/nvkm/subdev/clk/base.c +31 -0
+
+	if (nvbios_thermal_policies_parse(bios, &header))
+		return;
+
+	if (!header.ecount)
+		return;
+
+	for (i = 0; i < header.ecount; i++) {
+		if (nvbios_thermal_policies_entry(bios, &header, i, &entry))
+			return;
+
+		if (entry.mode != 1)
+			continue;
+
+		mt = min_t(s16, mt, (entry.t0 + entry.down_offset) / 32);
+		rt = min_t(s16, rt, (entry.t0 + entry.up_offset) / 32);
+	}
+
+	if (mt == 0xff || rt == 0xff)
+		return;
+
+	clk->max_temp = mt;
+	clk->relax_temp = rt;
+
+	nvkm_debug(subdev, "setting up sw throttling thresholds (%u/%u°C)\n",
+		   clk->max_temp, clk->relax_temp);
+}
+
 int
 nvkm_clk_ctor(const struct nvkm_clk_func *func, struct nvkm_device *device,
 	      int index, bool allow_reclock, struct nvkm_clk *clk)
@@ -733,6 +772,9 @@ nvkm_clk_ctor(const struct nvkm_clk_func *func, struct nvkm_device *device,
 
 	clk->boost_mode = nvkm_longopt(device->cfgopt, "NvBoost",
 				       NVKM_CLK_BOOST_NONE);
+
+	nvkm_clk_parse_max_temp(clk);
+
 	return 0;
 }
 
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20171008183618.fvszybhbe2u3m2nv-WLoDKDh+7sdAfugRpC6u6w@public.gmane.org

#55 lore raw

Re: [RFC PATCH 16/29] clk: parse thermal policies for throttling thresholds

Quoted 41 lines · Pierre Moreau
Quoted 13 lines · Karol Herbst

v2: use min_t

---
 drm/nouveau/include/nvkm/subdev/clk.h |  2 ++
 drm/nouveau/nvkm/subdev/clk/base.c    | 42 +++++++++++++++++++++++++++++++++++
 2 files changed, 44 insertions(+)
drm/nouveau/include/nvkm/subdev/clk.h +0 -0
index f35518c3..f5ff1fd9 100644

drm/nouveau/include/nvkm/subdev/clk.h struct nvkm_clk { · line 108

Quoted 5 lines
drm/nouveau/include/nvkm/subdev/clk.h +2 -0
@@ -104,6 +104,8 @@ struct nvkm_clk {
      struct nvkm_cstate *cstate;
      int exp_cstateid;
      u8  temp;
+     u8  max_temp;
+     u8  relax_temp;

I guess those should be int, similar to the changes you made in patch 1.

Quoted 19 lines
drm/nouveau/include/nvkm/subdev/clk.h +0 -0
      bool allow_reclock;
 #define NVKM_CLK_BOOST_NONE 0x0
drm/nouveau/nvkm/subdev/clk/base.c +1 -0
index 54188d2b..54e14936 100644
@@ -27,6 +27,7 @@
 #include <subdev/bios/boost.h>
 #include <subdev/bios/cstep.h>
 #include <subdev/bios/perf.h>
+#include <subdev/bios/thermal_policies.h>
 #include <subdev/bios/vpstate.h>
 #include <subdev/fb.h>
 #include <subdev/therm.h>
@@ -659,6 +660,44 @@ nvkm_clk = {
      .fini = nvkm_clk_fini,
 };
 
Quoted 13 lines

drm/nouveau/nvkm/subdev/clk/base.c nvkm_clk = { · line 672

Quoted 10 lines
drm/nouveau/nvkm/subdev/clk/base.c +10 -0
+static void
+nvkm_clk_parse_max_temp(struct nvkm_clk *clk)
+{
+     struct nvkm_subdev *subdev = &clk->subdev;
+     struct nvkm_bios *bios = subdev->device->bios;
+     struct nvbios_thermal_policies_header header;
+     struct nvbios_thermal_policies_entry entry;
+     u8 i;
+     s16 mt = 0xff;
+     s16 rt = 0xff;

Why 0xff? I mean, sure, there is a high possibility that the GPU won’t like temperatures above 255℃, but still.

just a hack to properly check if we set any values we can use and make available.

Quoted 42 lines
Quoted 42 lines
drm/nouveau/nvkm/subdev/clk/base.c +31 -0
+
+     if (nvbios_thermal_policies_parse(bios, &header))
+             return;
+
+     if (!header.ecount)
+             return;
+
+     for (i = 0; i < header.ecount; i++) {
+             if (nvbios_thermal_policies_entry(bios, &header, i, &entry))
+                     return;
+
+             if (entry.mode != 1)
+                     continue;
+
+             mt = min_t(s16, mt, (entry.t0 + entry.down_offset) / 32);
+             rt = min_t(s16, rt, (entry.t0 + entry.up_offset) / 32);
+     }
+
+     if (mt == 0xff || rt == 0xff)
+             return;
+
+     clk->max_temp = mt;
+     clk->relax_temp = rt;
+
+     nvkm_debug(subdev, "setting up sw throttling thresholds (%u/%u°C)\n",
+                clk->max_temp, clk->relax_temp);
+}
+
 int
 nvkm_clk_ctor(const struct nvkm_clk_func *func, struct nvkm_device *device,
            int index, bool allow_reclock, struct nvkm_clk *clk)
@@ -733,6 +772,9 @@ nvkm_clk_ctor(const struct nvkm_clk_func *func, struct nvkm_device *device,
 
      clk->boost_mode = nvkm_longopt(device->cfgopt, "NvBoost",
                                     NVKM_CLK_BOOST_NONE);
+
+     nvkm_clk_parse_max_temp(clk);
+
      return 0;
 }
 
Quoted 7 lines
Quoted 7 lines

--
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

#56 lore raw

RFC PATCH 17/29 clk: thermal throttling

In reply to a message not in the archive

v2: make message about relaxed throttling an info
rework reporting about current clk state

---
 drm/nouveau/include/nvkm/subdev/clk.h |  1 +
 drm/nouveau/nvkm/subdev/clk/base.c    | 44 +++++++++++++++++++++++++----------
 2 files changed, 33 insertions(+), 12 deletions(-)
drm/nouveau/include/nvkm/subdev/clk.h +1 -0
index f5ff1fd9..b79bf657 100644
@@ -106,6 +106,7 @@ struct nvkm_clk {
 	u8  temp;
 	u8  max_temp;
 	u8  relax_temp;
+	bool throttled;
 
 	bool allow_reclock;
 #define NVKM_CLK_BOOST_NONE 0x0
drm/nouveau/nvkm/subdev/clk/base.c +32 -12

83 lines not on this page · raw message

Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

A message that is not in the archive (sent off-list or not yet received): 20170915171129.5009-18-karolherbst-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org

Reviewed-by
#58 lore raw

Re: [RFC PATCH 17/29] clk: thermal throttling

Quoted 120 lines · Karol Herbst

v2: make message about relaxed throttling an info
rework reporting about current clk state

---
 drm/nouveau/include/nvkm/subdev/clk.h |  1 +
 drm/nouveau/nvkm/subdev/clk/base.c    | 44 +++++++++++++++++++++++++----------
 2 files changed, 33 insertions(+), 12 deletions(-)
drm/nouveau/include/nvkm/subdev/clk.h +1 -0
index f5ff1fd9..b79bf657 100644
@@ -106,6 +106,7 @@ struct nvkm_clk {
 	u8  temp;
 	u8  max_temp;
 	u8  relax_temp;
+	bool throttled;
 
 	bool allow_reclock;
 #define NVKM_CLK_BOOST_NONE 0x0
drm/nouveau/nvkm/subdev/clk/base.c +32 -12
index 54e14936..72ca5e0c 100644
@@ -279,7 +279,7 @@ nvkm_pstate_prog(struct nvkm_clk *clk, int pstateid)
 	struct nvkm_fb *fb = subdev->device->fb;
 	struct nvkm_pci *pci = subdev->device->pci;
 	struct nvkm_pstate *pstate;
-	int ret;
+	int ret, cstate;
 
 	if (pstateid == NVKM_CLK_PSTATE_DEFAULT)
 		return 0;
@@ -308,7 +308,12 @@ nvkm_pstate_prog(struct nvkm_clk *clk, int pstateid)
 		ram->func->tidy(ram);
 	}
 
-	return nvkm_cstate_prog(clk, pstate, clk->exp_cstateid);
+	if (clk->throttled)
+		cstate = list_first_entry(&pstate->list, struct nvkm_cstate, head)->id;
+	else
+		cstate = clk->exp_cstateid;
+
+	return nvkm_cstate_prog(clk, pstate, cstate);
 }
 
 static void
@@ -322,22 +327,20 @@ nvkm_clk_update_work(struct work_struct *work)
 		return;
 	clk->pwrsrc = power_supply_is_system_supplied();
 
-	if (clk->pstate)
-		pstate = clk->pstate->pstate;
-	else
-		pstate = NVKM_CLK_PSTATE_DEFAULT;
-	nvkm_trace(subdev, "P %d PWR %d U(AC) %d U(DC) %d A %d C %d T %d°C\n",
-		   pstate, clk->pwrsrc, clk->ustate_ac, clk->ustate_dc,
-		   clk->astate, clk->exp_cstateid, clk->temp);
-
 	pstate = clk->pwrsrc ? clk->ustate_ac : clk->ustate_dc;
 	if (clk->state_nr && pstate != -1) {
-		pstate = (pstate < 0) ? clk->astate : pstate;
+		if (clk->throttled)
+			pstate = list_first_entry(&clk->states, struct nvkm_pstate, head)->pstate;
+		else
+			pstate = (pstate < 0) ? clk->astate : pstate;
 	} else {
 		pstate = NVKM_CLK_PSTATE_DEFAULT;
 	}
 
-	nvkm_trace(subdev, "-> %d\n", pstate);
+	nvkm_trace(subdev, "PWR %d U(AC) %d U(DC) %d A %d C %d T %d°C\n",
+		   clk->pwrsrc, clk->ustate_ac, clk->ustate_dc,
+		   clk->astate, clk->exp_cstateid, clk->temp);
+
 	if (!clk->pstate || pstate != clk->pstate->pstate) {
 		int ret = nvkm_pstate_prog(clk, pstate);
 		if (ret) {
@@ -564,9 +567,25 @@ nvkm_clk_astate(struct nvkm_clk *clk, int req, int rel, bool wait)
 int
 nvkm_clk_tstate(struct nvkm_clk *clk, u8 temp)
 {
+	struct nvkm_subdev *subdev = &clk->subdev;
 	if (clk->temp == temp)
 		return 0;
 	clk->temp = temp;
+	if (clk->max_temp && clk->relax_temp) {
+		if (!clk->throttled && temp > clk->max_temp) {
+			nvkm_warn(subdev,
+				  "temperature (%d C) hit the 'downclock' "
+				  "threshold\n",
+				  temp);
+			clk->throttled = true;
+		} else if (clk->throttled && temp < clk->relax_temp) {
+			nvkm_info(subdev,
+				  "temperature (%d C) went below the "
+				  "'relax' threshold\n",
+				  temp);
+			clk->throttled = false;
+		}
+	}
 	return nvkm_clk_update(clk, false);
 }
 
@@ -727,6 +746,7 @@ nvkm_clk_ctor(const struct nvkm_clk_func *func, struct nvkm_device *device,
 	clk->ustate_dc = -1;
 	clk->exp_cstateid = NVKM_CLK_CSTATE_DEFAULT;
 	clk->temp = 90; /* reasonable default value */
+	clk->throttled = false;
 
 	clk->allow_reclock = allow_reclock;
 
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau

#59 lore raw

RFC PATCH 18/29 clk: Only do partial reclocks as required

In reply to a message not in the archive
---
 drm/nouveau/nvkm/subdev/clk/base.c  | 26 ++++++++++++++++++--------
 drm/nouveau/nvkm/subdev/volt/base.c |  3 +++
 2 files changed, 21 insertions(+), 8 deletions(-)
drm/nouveau/nvkm/subdev/clk/base.c +18 -8
index 72ca5e0c..a154a425 100644
@@ -171,7 +171,7 @@ nvkm_cstate_prog(struct nvkm_clk *clk, struct nvkm_pstate *pstate, int cstatei)
 	struct nvkm_therm *therm = device->therm;
 	struct nvkm_volt *volt = device->volt;
 	struct nvkm_cstate *cstate;
-	int ret;
+	int ret = 0;
 
 	if (cstatei == NVKM_CLK_CSTATE_DEFAULT)
 		return 0;
@@ -183,6 +183,12 @@ nvkm_cstate_prog(struct nvkm_clk *clk, struct nvkm_pstate *pstate, int cstatei)
 		cstate = &pstate->base;
 	}
 
+	// if the cstate matches, just update the voltage
+	if (clk->cstate && clk->cstate == cstate)
+		return nvkm_volt_set_id(volt, clk->cstate->voltage,
+					clk->pstate->base.voltage, clk->temp,
+					0);
+
 	if (therm) {
 		ret = nvkm_therm_cstate(therm, pstate->fanspeed, +1);
 		if (ret && ret != -ENODEV) {
@@ -284,6 +290,11 @@ nvkm_pstate_prog(struct nvkm_clk *clk, int pstateid)
 	if (pstateid == NVKM_CLK_PSTATE_DEFAULT)
 		return 0;
 
+	if (clk->pstate && clk->pstate->pstate == pstateid) {
+		pstate = clk->pstate;
+		goto cstate;
+	}
+
 	list_for_each_entry(pstate, &clk->states, head) {
 		if (pstate->pstate == pstateid)
 			break;
@@ -308,6 +319,7 @@ nvkm_pstate_prog(struct nvkm_clk *clk, int pstateid)
 		ram->func->tidy(ram);
 	}
 
+cstate:
 	if (clk->throttled)
 		cstate = list_first_entry(&pstate->list, struct nvkm_cstate, head)->id;
 	else
@@ -321,7 +333,7 @@ nvkm_clk_update_work(struct work_struct *work)
 {
 	struct nvkm_clk *clk = container_of(work, typeof(*clk), work);
 	struct nvkm_subdev *subdev = &clk->subdev;
-	int pstate;
+	int pstate, ret;
 
 	if (!atomic_xchg(&clk->waiting, 0))
 		return;
@@ -341,12 +353,10 @@ nvkm_clk_update_work(struct work_struct *work)
 		   clk->pwrsrc, clk->ustate_ac, clk->ustate_dc,
 		   clk->astate, clk->exp_cstateid, clk->temp);
 
-	if (!clk->pstate || pstate != clk->pstate->pstate) {
-		int ret = nvkm_pstate_prog(clk, pstate);
-		if (ret) {
-			nvkm_error(subdev, "error setting pstate %d: %d\n",
-				   pstate, ret);
-		}
+	ret = nvkm_pstate_prog(clk, pstate);
+	if (ret) {
+		nvkm_error(subdev, "error setting pstate %d: %d\n",
+			   pstate, ret);
 	}
 
 	wake_up_all(&clk->wait);
drm/nouveau/nvkm/subdev/volt/base.c +3 -0
index e344901c..56a0f379 100644
@@ -162,6 +162,9 @@ nvkm_volt_set_id(struct nvkm_volt *volt, u8 id, u8 min_id, u8 temp,
 {
 	int ret;
 
+	if (!volt)
+		return -ENODEV;
+
 	if (volt->func->set_id)
 		return volt->func->set_id(volt, id, condition);
 
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau
#60 lore raw

RFC PATCH 19/29 secboot/acr352: reset PMU after secboot

In reply to a message not in the archive

This is needed for using Nouveaus PMU image after performing secboot. This will be helpfull for Maxwell2 reclocking on boards without externally controlled fans like on most laptops or fanless boards.

---
 drm/nouveau/nvkm/subdev/secboot/acr_r352.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
drm/nouveau/nvkm/subdev/secboot/acr_r352.c +13 -0
index a7213542..00095ef8 100644
@@ -924,6 +924,19 @@ acr_r352_bootstrap(struct acr_r352 *acr, struct nvkm_secboot *sb)
 		}
 	}
 
+	/* reset the PMU if needed */
+	if (acr->base.boot_falcon == NVKM_SECBOOT_FALCON_PMU &&
+	    !nvkm_secboot_is_managed(sb, NVKM_SECBOOT_FALCON_PMU)) {
+		struct nvkm_pmu *pmu = subdev->device->pmu;
+		if (pmu) {
+			ret = nvkm_subdev_init(&pmu->subdev);
+			if (ret < 0) {
+				nvkm_error(subdev, "Failed to reset PMU\n");
+				return ret;
+			}
+		}
+	}
+
 	return 0;
 }
 
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau
#61 lore raw

RFC PATCH 20/29 device: enable clk for Maxwell2

In reply to a message not in the archive

Reclokcing will only be enabled by setting NvFanless to true.

---
 drm/nouveau/nvkm/engine/device/base.c |  3 +++
 drm/nouveau/nvkm/subdev/clk/gk104.c   | 10 +++++++++-
 2 files changed, 12 insertions(+), 1 deletion(-)
drm/nouveau/nvkm/engine/device/base.c +3 -0
index 28fd4fa9..c1ede28a 100644
@@ -2029,6 +2029,7 @@ nv120_chipset = {
 	.bar = gf100_bar_new,
 	.bios = nvkm_bios_new,
 	.bus = gf100_bus_new,
+	.clk = gk104_clk_new,
 	.devinit = gm200_devinit_new,
 	.fb = gm200_fb_new,
 	.fuse = gm107_fuse_new,
@@ -2064,6 +2065,7 @@ nv124_chipset = {
 	.bar = gf100_bar_new,
 	.bios = nvkm_bios_new,
 	.bus = gf100_bus_new,
+	.clk = gk104_clk_new,
 	.devinit = gm200_devinit_new,
 	.fb = gm200_fb_new,
 	.fuse = gm107_fuse_new,
@@ -2099,6 +2101,7 @@ nv126_chipset = {
 	.bar = gf100_bar_new,
 	.bios = nvkm_bios_new,
 	.bus = gf100_bus_new,
+	.clk = gk104_clk_new,
 	.devinit = gm200_devinit_new,
 	.fb = gm200_fb_new,
 	.fuse = gm107_fuse_new,
drm/nouveau/nvkm/subdev/clk/gk104.c +9 -1
index 0b37e3da..be04463e 100644
@@ -25,6 +25,7 @@
 #include "priv.h"
 #include "pll.h"
 
+#include <core/option.h>
 #include <subdev/timer.h>
 #include <subdev/bios.h>
 #include <subdev/bios/pll.h>
@@ -507,10 +508,17 @@ int
 gk104_clk_new(struct nvkm_device *device, int index, struct nvkm_clk **pclk)
 {
 	struct gk104_clk *clk;
+	bool reclocking;
 
 	if (!(clk = kzalloc(sizeof(*clk), GFP_KERNEL)))
 		return -ENOMEM;
 	*pclk = &clk->base;
 
-	return nvkm_clk_ctor(&gk104_clk, device, index, true, &clk->base);
+	if (device->chipset >= 0x120)
+		reclocking = nvkm_boolopt(device->cfgopt, "NvFanless", false);
+	else
+		reclocking = true;
+
+	return nvkm_clk_ctor(&gk104_clk, device, index, reclocking,
+			     &clk->base);
 }
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau
#62 lore raw

RFC PATCH 21/29 clk: Save the max clock we can set

In reply to a message not in the archive

Saving the highest possible clock from the vpstate domain makes it easier to read it out whenever we want.

---
 drm/nouveau/include/nvkm/subdev/clk.h | 1 +
 drm/nouveau/nvkm/subdev/clk/base.c    | 2 ++
 2 files changed, 3 insertions(+)
drm/nouveau/include/nvkm/subdev/clk.h +1 -0
index b79bf657..4c225dcb 100644
@@ -115,6 +115,7 @@ struct nvkm_clk {
 	u8  boost_mode;
 	u32 base_khz;
 	u32 boost_khz;
+	u32 max_khz;
 
 	/*XXX: die, these are here *only* to support the completely
 	 *     bat-shit insane what-was-nouveau_hw.c code
drm/nouveau/nvkm/subdev/clk/base.c +2 -0
index a154a425..0fd92790 100644
@@ -267,6 +267,8 @@ nvkm_cstate_new(struct nvkm_clk *clk, int idx, struct nvkm_pstate *pstate)
 			u32 freq = nvkm_clk_adjust(clk, true, pstate->pstate,
 						   domain->bios, cstepX.freq);
 			cstate->domain[domain->name] = freq;
+			if (domain->flags & NVKM_CLK_DOM_FLAG_VPSTATE)
+				clk->max_khz = max(clk->max_khz, freq);
 		}
 		domain++;
 	}
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau
#63 lore raw

RFC PATCH 22/29 nvif: Add boost info and set operations

In reply to a message not in the archive

v5: Return ENODEV on devices without any vpstates.
Fail earlier if not supported.

---
 drm/nouveau/include/nvif/if0001.h     | 15 +++++++++
 drm/nouveau/nvkm/engine/device/ctrl.c | 61 +++++++++++++++++++++++++++++++++++
 2 files changed, 76 insertions(+)
drm/nouveau/include/nvif/if0001.h +15 -0
index bd5b6412..e4acd195 100644
@@ -4,6 +4,8 @@
 #define NVIF_CONTROL_PSTATE_INFO                                           0x00
 #define NVIF_CONTROL_PSTATE_ATTR                                           0x01
 #define NVIF_CONTROL_PSTATE_USER                                           0x02
+#define NVIF_CONTROL_BOOST_INFO                                            0x03
+#define NVIF_CONTROL_BOOST_SET                                             0x04
 
 struct nvif_control_pstate_info_v0 {
 	__u8  version;
@@ -43,4 +45,17 @@ struct nvif_control_pstate_user_v0 {
 	__s8  pwrsrc; /*  in: target power source */
 	__u8  pad03[5];
 };
+
+struct nvif_control_boost_info_v0 {
+	__u8  version;
+	__u8  mode;
+	__u16 base_mhz;
+	__u16 boost_mhz;
+	__u16 max_mhz;
+};
+
+struct nvif_control_boost_set_v0 {
+	__u8  version;
+	__u8  mode;
+};
 #endif
drm/nouveau/nvkm/engine/device/ctrl.c +61 -0

73 lines not on this page · raw message

Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau
#64 lore raw

RFC PATCH 23/29 debugfs: Add boost interface to change the boost_mode

In reply to a message not in the archive
---
 drm/nouveau/nouveau_debugfs.c | 80 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 80 insertions(+)
drm/nouveau/nouveau_debugfs.c +80 -0
index b0a598f9..c19cc535 100644
@@ -184,6 +184,85 @@ static const struct file_operations nouveau_pstate_fops = {
 	.write = nouveau_debugfs_pstate_set,
 };
 
+static void
+nouveau_debugfs_boost_get_entry(struct seq_file *m, u8 mode, u8 entry, u16 value)
+{
+	if (value) {
+		if (mode == entry)
+			seq_printf(m, "*%i", entry);
+		else
+			seq_printf(m, " %i", entry);
+		seq_printf(m, ": %u MHz\n", value);
+	}
+}
+
+static int
+nouveau_debugfs_boost_get(struct seq_file *m, void *data)
+{
+	struct drm_device *drm = m->private;
+	struct nouveau_debugfs *debugfs = nouveau_debugfs(drm);
+	struct nvif_object *ctrl = &debugfs->ctrl;
+	struct nvif_control_boost_info_v0 info = {};
+	int ret;
+
+	ret = nvif_mthd(ctrl, NVIF_CONTROL_BOOST_INFO, &info, sizeof(info));
+	if (ret)
+		return ret;
+
+	nouveau_debugfs_boost_get_entry(m, info.mode, 0, info.base_mhz);
+	nouveau_debugfs_boost_get_entry(m, info.mode, 1, info.boost_mhz);
+	nouveau_debugfs_boost_get_entry(m, info.mode, 2, info.max_mhz);
+	return 0;
+}
+
+static ssize_t
+nouveau_debugfs_boost_set(struct file *file, const char __user *ubuf,
+			  size_t len, loff_t *offp)
+{
+	struct seq_file *m = file->private_data;
+	struct drm_device *drm = m->private;
+	struct nouveau_debugfs *debugfs = nouveau_debugfs(drm);
+	struct nvif_object *ctrl = &debugfs->ctrl;
+	struct nvif_control_boost_set_v0 args = {};
+	char buf[3] = {};
+	long ret;
+	u8 value;
+
+	if (len >= sizeof(buf))
+		return -EINVAL;
+
+	if (copy_from_user(buf, ubuf, len))
+		return -EFAULT;
+
+	ret = kstrtou8(buf, 10, &value);
+	if (ret)
+		return ret;
+
+	args.mode = value;
+	ret = pm_runtime_get_sync(drm->dev);
+	if (IS_ERR_VALUE(ret) && ret != -EACCES)
+		return ret;
+	ret = nvif_mthd(ctrl, NVIF_CONTROL_BOOST_SET, &args, sizeof(args));
+	pm_runtime_put_autosuspend(drm->dev);
+	if (ret)
+		return ret;
+
+	return len;
+}
+
+static int
+nouveau_debugfs_boost_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, nouveau_debugfs_boost_get, inode->i_private);
+}
+
+static const struct file_operations nouveau_boost_fops = {
+	.owner = THIS_MODULE,
+	.open = nouveau_debugfs_boost_open,
+	.read = seq_read,
+	.write = nouveau_debugfs_boost_set,
+};
+
 static struct drm_info_list nouveau_debugfs_list[] = {
 	{ "vbios.rom", nouveau_debugfs_vbios_image, 0, NULL },
 };
@@ -193,6 +272,7 @@ static const struct nouveau_debugfs_files {
 	const char *name;
 	const struct file_operations *fops;
 } nouveau_debugfs_files[] = {
+	{"boost", &nouveau_boost_fops},
 	{"pstate", &nouveau_pstate_fops},
 };
 
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau
#65 lore raw

RFC PATCH 24/29 bios/vpstate: there are some fermi vbios with no boost or tdp entry

In reply to a message not in the archive
---
 drm/nouveau/nvkm/subdev/bios/vpstate.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
drm/nouveau/nvkm/subdev/bios/vpstate.c +8 -2
index 20b6fc82..71524548 100644
@@ -58,8 +58,14 @@ nvbios_vpstate_parse(struct nvkm_bios *b, struct nvbios_vpstate_header *h)
 		h->ecount   = nvbios_rd08(b, h->offset + 0x5);
 
 		h->base_id  = nvbios_rd08(b, h->offset + 0x0f);
-		h->boost_id = nvbios_rd08(b, h->offset + 0x10);
-		h->tdp_id   = nvbios_rd08(b, h->offset + 0x11);
+		if (h->hlen > 0x10)
+			h->boost_id = nvbios_rd08(b, h->offset + 0x10);
+		else
+			h->boost_id = 0xff;
+		if (h->hlen > 0x11)
+			h->tdp_id = nvbios_rd08(b, h->offset + 0x11);
+		else
+			h->tdp_id = 0xff;
 		return 0;
 	default:
 		return -EINVAL;
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau
#66 lore raw

RFC PATCH 25/29 bios/vpstate: parse max battery id

In reply to a message not in the archive
---
 drm/nouveau/include/nvkm/subdev/bios/vpstate.h | 1 +
 drm/nouveau/nvkm/subdev/bios/vpstate.c         | 3 ++-
 2 files changed, 3 insertions(+), 1 deletion(-)
drm/nouveau/include/nvkm/subdev/bios/vpstate.h +1 -0
index 87f804fc..181de47b 100644
@@ -10,6 +10,7 @@ struct nvbios_vpstate_header {
 	u8 scount;
 	u8 slen;
 
+	u8 battery_id;
 	u8 base_id;
 	u8 boost_id;
 	u8 tdp_id;
drm/nouveau/nvkm/subdev/bios/vpstate.c +2 -1
index 71524548..c1de6421 100644
@@ -57,7 +57,8 @@ nvbios_vpstate_parse(struct nvkm_bios *b, struct nvbios_vpstate_header *h)
 		h->scount   = nvbios_rd08(b, h->offset + 0x4);
 		h->ecount   = nvbios_rd08(b, h->offset + 0x5);
 
-		h->base_id  = nvbios_rd08(b, h->offset + 0x0f);
+		h->battery_id = nvbios_rd08(b, h->offset + 0x0c);
+		h->base_id    = nvbios_rd08(b, h->offset + 0x0f);
 		if (h->hlen > 0x10)
 			h->boost_id = nvbios_rd08(b, h->offset + 0x10);
 		else
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau
#67 lore raw

RFC PATCH 26/29 clk: refactor the base and boost clock limits so that we can limit pstates as well

In reply to a message not in the archive
---
 drm/nouveau/include/nvkm/subdev/clk.h |  9 +++++++--
 drm/nouveau/nvkm/engine/device/ctrl.c |  8 ++++----
 drm/nouveau/nvkm/subdev/clk/base.c    | 34 +++++++++++++++++++++++++---------
 3 files changed, 36 insertions(+), 15 deletions(-)
drm/nouveau/include/nvkm/subdev/clk.h +7 -2
index 4c225dcb..70505c9b 100644
@@ -81,6 +81,11 @@ struct nvkm_domain {
 	int mdiv;
 };
 
+struct nvkm_clk_limit {
+	u8  pstate;
+	u32 max_khz;
+};
+
 struct nvkm_clk {
 	const struct nvkm_clk_func *func;
 	struct nvkm_subdev subdev;
@@ -113,8 +118,8 @@ struct nvkm_clk {
 #define NVKM_CLK_BOOST_BIOS 0x1
 #define NVKM_CLK_BOOST_FULL 0x2
 	u8  boost_mode;
-	u32 base_khz;
-	u32 boost_khz;
+	struct nvkm_clk_limit base_limit;
+	struct nvkm_clk_limit boost_limit;
 	u32 max_khz;
 
 	/*XXX: die, these are here *only* to support the completely
drm/nouveau/nvkm/engine/device/ctrl.c +4 -4
index 0c44e4d2..d521cd05 100644
@@ -181,7 +181,7 @@ nvkm_control_mthd_boost_info(struct nvkm_control *ctrl, void *data, u32 size)
 	if (!clk)
 		return -ENODEV;
 
-	if (!clk->base_khz && !clk->boost_khz)
+	if (!clk->base_limit.max_khz && !clk->boost_limit.max_khz)
 		return -ENODEV;
 
 	nvif_ioctl(&ctrl->object, "control boost info size %d\n", size);
@@ -192,8 +192,8 @@ nvkm_control_mthd_boost_info(struct nvkm_control *ctrl, void *data, u32 size)
 		return ret;
 
 	args->v0.mode = clk->boost_mode;
-	args->v0.base_mhz = clk->base_khz / 2000;
-	args->v0.boost_mhz = clk->boost_khz / 2000;
+	args->v0.base_mhz = clk->base_limit.max_khz / 2000;
+	args->v0.boost_mhz = clk->boost_limit.max_khz / 2000;
 	args->v0.max_mhz = clk->max_khz / 2000;
 	return 0;
 }
@@ -210,7 +210,7 @@ nvkm_control_mthd_boost_set(struct nvkm_control *ctrl, void *data, u32 size)
 	if (!clk)
 		return -ENODEV;
 
-	if (!clk->base_khz && !clk->boost_khz)
+	if (!clk->base_limit.max_khz && !clk->boost_limit.max_khz)
 		return -ENODEV;
 
 	nvif_ioctl(&ctrl->object, "control boost set size %d\n", size);
drm/nouveau/nvkm/subdev/clk/base.c +25 -9
index 0fd92790..9f44ace0 100644
@@ -87,14 +87,22 @@ nvkm_cstate_valid(struct nvkm_clk *clk, struct nvkm_cstate *cstate,
 	while (domain && domain->name != nv_clk_src_max) {
 		if (domain->flags & NVKM_CLK_DOM_FLAG_VPSTATE) {
 			u32 freq = cstate->domain[domain->name];
+			u32 limit;
 			switch (clk->boost_mode) {
 			case NVKM_CLK_BOOST_NONE:
-				if (clk->base_khz && freq > clk->base_khz)
-					return false;
+				limit = clk->base_limit.max_khz;
+				if (limit)
+					break;
 			case NVKM_CLK_BOOST_BIOS:
-				if (clk->boost_khz && freq > clk->boost_khz)
-					return false;
+				limit = clk->boost_limit.max_khz;
+				break;
+			default:
+				limit = 0;
+				break;
 			}
+
+			if (limit && freq > limit)
+				return false;
 		}
 		domain++;
 	}
@@ -729,6 +737,14 @@ nvkm_clk_parse_max_temp(struct nvkm_clk *clk)
 		   clk->max_temp, clk->relax_temp);
 }
 
+void static
+nvkm_clk_fill_limit(struct nvkm_clk_limit *l,
+		    const struct nvbios_vpstate_entry *e)
+{
+	l->pstate = e->pstate;
+	l->max_khz = e->clock_mhz * 1000;
+}
+
 int
 nvkm_clk_ctor(const struct nvkm_clk_func *func, struct nvkm_device *device,
 	      int index, bool allow_reclock, struct nvkm_clk *clk)
@@ -742,11 +758,11 @@ nvkm_clk_ctor(const struct nvkm_clk_func *func, struct nvkm_device *device,
 	nvkm_subdev_ctor(&nvkm_clk, device, index, subdev);
 
 	if (bios && !nvbios_vpstate_parse(bios, &h)) {
-		struct nvbios_vpstate_entry base, boost;
-		if (!nvbios_vpstate_entry(bios, &h, h.boost_id, &boost))
-			clk->boost_khz = boost.clock_mhz * 1000;
-		if (!nvbios_vpstate_entry(bios, &h, h.base_id, &base))
-			clk->base_khz = base.clock_mhz * 1000;
+		struct nvbios_vpstate_entry vpe;
+		if (!nvbios_vpstate_entry(bios, &h, h.boost_id, &vpe))
+			nvkm_clk_fill_limit(&clk->boost_limit, &vpe);
+		if (!nvbios_vpstate_entry(bios, &h, h.base_id, &vpe))
+			nvkm_clk_fill_limit(&clk->base_limit, &vpe);
 	}
 
 	clk->func = func;
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau
#68 lore raw

RFC PATCH 27/29 clk: implement limiting pstates just like we do for cstates

In reply to a message not in the archive
---
 drm/nouveau/nvkm/subdev/clk/base.c | 62 ++++++++++++++++++++++++++++++++------
 1 file changed, 52 insertions(+), 10 deletions(-)
drm/nouveau/nvkm/subdev/clk/base.c +52 -10
index 9f44ace0..2a51c078 100644
@@ -288,6 +288,52 @@ nvkm_cstate_new(struct nvkm_clk *clk, int idx, struct nvkm_pstate *pstate)
 /******************************************************************************
  * P-States
  *****************************************************************************/
+static struct nvkm_pstate *
+nvkm_pstate_find_best(struct nvkm_clk *clk, struct nvkm_pstate *start)
+{
+	struct nvkm_pstate *pstate;
+	u8 limit;
+
+	switch (clk->boost_mode) {
+	case NVKM_CLK_BOOST_NONE:
+		limit = clk->base_limit.pstate;
+		if (limit)
+			break;
+	case NVKM_CLK_BOOST_BIOS:
+		limit = clk->boost_limit.pstate;
+		break;
+	default:
+		limit = 0;
+		break;
+	}
+
+	if (!limit)
+		return start;
+
+	for (pstate = start; &pstate->head != &clk->states;
+	     pstate = list_entry(pstate->head.prev, typeof(*pstate), head)) {
+		if (limit >= pstate->pstate)
+			break;
+	}
+	return pstate;
+}
+
+static struct nvkm_pstate *
+nvkm_pstate_get(struct nvkm_clk *clk, int pstateid)
+{
+	struct nvkm_pstate *pstate;
+	switch (pstateid) {
+	case NVKM_CLK_PSTATE_DEFAULT:
+		return NULL;
+	default:
+		list_for_each_entry(pstate, &clk->states, head) {
+			if (pstate->pstate == pstateid)
+				return pstate;
+		}
+	}
+	return NULL;
+}
+
 static int
 nvkm_pstate_prog(struct nvkm_clk *clk, int pstateid)
 {
@@ -300,20 +346,16 @@ nvkm_pstate_prog(struct nvkm_clk *clk, int pstateid)
 	if (pstateid == NVKM_CLK_PSTATE_DEFAULT)
 		return 0;
 
-	if (clk->pstate && clk->pstate->pstate == pstateid) {
-		pstate = clk->pstate;
-		goto cstate;
-	}
-
-	list_for_each_entry(pstate, &clk->states, head) {
-		if (pstate->pstate == pstateid)
-			break;
-	}
+	pstate = nvkm_pstate_get(clk, pstateid);
+	pstate = nvkm_pstate_find_best(clk, pstate);
 
 	if (!pstate)
 		return -EINVAL;
 
-	nvkm_debug(subdev, "setting performance state %x\n", pstateid);
+	if (clk->pstate && clk->pstate == pstate)
+		goto cstate;
+
+	nvkm_debug(subdev, "setting performance state %x\n", pstate->pstate);
 	clk->pstate = pstate;
 
 	nvkm_pcie_set_link(pci, pstate->pcie_speed, pstate->pcie_width);
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau
#69 lore raw

RFC PATCH 28/29 clk: move the switch out of the loop in nvkm_cstate_valid

In reply to a message not in the archive
---
 drm/nouveau/nvkm/subdev/clk/base.c | 36 +++++++++++++++++++-----------------
 1 file changed, 19 insertions(+), 17 deletions(-)
drm/nouveau/nvkm/subdev/clk/base.c +19 -17
index 2a51c078..994d32b9 100644
@@ -83,28 +83,30 @@ nvkm_cstate_valid(struct nvkm_clk *clk, struct nvkm_cstate *cstate,
 	const struct nvkm_domain *domain = clk->domains;
 	struct nvkm_volt *volt = clk->subdev.device->volt;
 	int voltage;
+	u32 limit;
 
-	while (domain && domain->name != nv_clk_src_max) {
-		if (domain->flags & NVKM_CLK_DOM_FLAG_VPSTATE) {
-			u32 freq = cstate->domain[domain->name];
-			u32 limit;
-			switch (clk->boost_mode) {
-			case NVKM_CLK_BOOST_NONE:
-				limit = clk->base_limit.max_khz;
-				if (limit)
-					break;
-			case NVKM_CLK_BOOST_BIOS:
-				limit = clk->boost_limit.max_khz;
-				break;
-			default:
-				limit = 0;
-				break;
-			}
+	switch (clk->boost_mode) {
+	case NVKM_CLK_BOOST_NONE:
+		limit = clk->base_limit.max_khz;
+		if (limit)
+			break;
+	case NVKM_CLK_BOOST_BIOS:
+		limit = clk->boost_limit.max_khz;
+		break;
+	default:
+		limit = 0;
+		break;
+	}
 
+	if (limit) {
+		for (; domain && domain->name != nv_clk_src_max; domain++) {
+			u32 freq;
+			if (!(domain->flags & NVKM_CLK_DOM_FLAG_VPSTATE))
+				continue;
+			freq = cstate->domain[domain->name];
 			if (limit && freq > limit)
 				return false;
 		}
-		domain++;
 	}
 
 	if (!volt)
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau
#70 lore raw

RFC PATCH 29/29 clk: limit clocks on battery

In reply to a message not in the archive
---
 drm/nouveau/include/nvkm/subdev/clk.h |  1 +
 drm/nouveau/nvkm/subdev/clk/base.c    | 18 ++++++++++++++++++
 2 files changed, 19 insertions(+)
drm/nouveau/include/nvkm/subdev/clk.h +1 -0
index 70505c9b..fae45e6e 100644
@@ -120,6 +120,7 @@ struct nvkm_clk {
 	u8  boost_mode;
 	struct nvkm_clk_limit base_limit;
 	struct nvkm_clk_limit boost_limit;
+	struct nvkm_clk_limit batt_limit;
 	u32 max_khz;
 
 	/*XXX: die, these are here *only* to support the completely
drm/nouveau/nvkm/subdev/clk/base.c +18 -0
index 994d32b9..0de5b3dc 100644
@@ -98,6 +98,14 @@ nvkm_cstate_valid(struct nvkm_clk *clk, struct nvkm_cstate *cstate,
 		break;
 	}
 
+	if (!clk->pwrsrc) {
+		u32 blimit = clk->batt_limit.max_khz;
+		if (!limit)
+			limit = blimit;
+		else if (blimit)
+			limit = min(blimit, limit);
+	}
+
 	if (limit) {
 		for (; domain && domain->name != nv_clk_src_max; domain++) {
 			u32 freq;
@@ -309,6 +317,14 @@ nvkm_pstate_find_best(struct nvkm_clk *clk, struct nvkm_pstate *start)
 		break;
 	}
 
+	if (!clk->pwrsrc) {
+		u8 blimit = clk->batt_limit.pstate;
+		if (!limit)
+			limit = blimit;
+		else if (blimit)
+			limit = min(blimit, limit);
+	}
+
 	if (!limit)
 		return start;
 
@@ -807,6 +823,8 @@ nvkm_clk_ctor(const struct nvkm_clk_func *func, struct nvkm_device *device,
 			nvkm_clk_fill_limit(&clk->boost_limit, &vpe);
 		if (!nvbios_vpstate_entry(bios, &h, h.base_id, &vpe))
 			nvkm_clk_fill_limit(&clk->base_limit, &vpe);
+		if (!nvbios_vpstate_entry(bios, &h, h.battery_id, &vpe))
+			nvkm_clk_fill_limit(&clk->batt_limit, &vpe);
 	}
 
 	clk->func = func;
Signature · 6 lines
2.14.1

_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau