drm/i915/cnl: Add support slice/subslice/eu configs
Subsystems (2)
Rodrigo Vivi
maintainerPATCH 1/2 drm/i915/cnl: Add support slice/subslice/eu configs
From: Ben Widawsky <[email protected]>
Cannonlake Slice and Subslice information has changed.
This patch initially provided by Ben adds the proper sseu initialization.
v2: This v2 done by Rodrigo includes:
- Fix on Total slices count by avoiding [1][2] and [2][2].
- Inclusion of EU Per Subslice.
- Commit message.
v3: This v3 done by Rodrigo includes:
- Handle all possible bits and extra fuse register.
- Use INTEL_GEN macro.
- Fully assume uniform distribution so remove union with eu_per_subslice and add proper the comment.
--- drivers/gpu/drm/i915/i915_reg.h | 8 +++++++ drivers/gpu/drm/i915/intel_device_info.c | 37 +++++++++++++++++++++++++++++++- 2 files changed, 44 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_reg.h +8 -0
@@ -2730,6 +2730,11 @@ enum i915_power_well_id {#define GEN9_F2_SS_DIS_SHIFT 20#define GEN9_F2_SS_DIS_MASK (0xf << GEN9_F2_SS_DIS_SHIFT) +#define GEN10_F2_S_ENA_SHIFT 22 +#define GEN10_F2_S_ENA_MASK (0xf << GEN10_F2_S_ENA_SHIFT) +#define GEN10_F2_SS_DIS_SHIFT 18 +#define GEN10_F2_SS_DIS_MASK (0x7 << GEN10_F2_SS_DIS_SHIFT) +#define GEN8_EU_DISABLE0 _MMIO(0x9134)#define GEN8_EU_DIS0_S0_MASK 0xffffff#define GEN8_EU_DIS0_S1_SHIFT 24
@@ -2745,6 +2750,9 @@ enum i915_power_well_id {#define GEN9_EU_DISABLE (slice) _MMIO(0x9134 + (slice)*0x4) +#define GEN10_EU_DISABLE3 _MMIO(0x9140) +#define GEN10_EU_DIS_SS_MASK 0xff +#define GEN6_BSD_SLEEP_PSMI_CONTROL _MMIO(0x12050)#define GEN6_BSD_SLEEP_MSG_DISABLE (1 << 0)#define GEN6_BSD_SLEEP_FLUSH_DISABLE (1 << 2)
drivers/gpu/drm/i915/intel_device_info.c +36 -1
@@ -82,6 +82,39 @@ void intel_device_info_dump(struct drm_i915_private *dev_priv)#undef PRINT_FLAG } +static void gen10_sseu_info_init (struct drm_i915_private *dev_priv) +{ +struct sseu_dev_info *sseu = &mkwrite_device_info (dev_priv)->sseu; +const u32 fuse2 =I915_READ (GEN8_FUSE2 ); + + sseu->slice_mask = (fuse2 &GEN10_F2_S_ENA_MASK ) >> +GEN10_F2_S_ENA_SHIFT ; + sseu->subslice_mask = (1 <<3 ) -1 ; + sseu->subslice_mask &= ~((fuse2 &GEN10_F2_SS_DIS_MASK ) >> +GEN10_F2_SS_DIS_SHIFT ); + + sseu->eu_total =hweight32 (~I915_READ (GEN8_EU_DISABLE0 )); + sseu->eu_total +=hweight32 (~I915_READ (GEN8_EU_DISABLE1 )); + sseu->eu_total +=hweight32 (~I915_READ (GEN8_EU_DISABLE2 )); + sseu->eu_total +=hweight8 (~(I915_READ (GEN10_EU_DISABLE3 ) & +GEN10_EU_DIS_SS_MASK )); + +/* +* CNL is expected to always have a uniform distribution +* of EU across subslices with the exception that any one +* EU in any one subslice may be fused off for die +* recovery. +*/ + sseu->eu_per_subslice =sseu_subslice_total (sseu) ? +DIV_ROUND_UP (sseu->eu_total, +sseu_subslice_total (sseu)) :0 ; + +/* No restrictions on Power Gating */ + sseu->has_slice_pg =1 ; + sseu->has_subslice_pg =1 ; + sseu->has_eu_pg =1 ; +} +static void cherryview_sseu_info_init (struct drm_i915_private *dev_priv) {struct sseu_dev_info *sseu = &mkwrite_device_info (dev_priv)->sseu;
@@ -409,8 +442,10 @@ void intel_device_info_runtime_init(struct drm_i915_private *dev_priv)cherryview_sseu_info_init (dev_priv); else if (IS_BROADWELL(dev_priv)) broadwell_sseu_info_init(dev_priv); - else if (INTEL_INFO(dev_priv)->gen >= 9) + else if (INTEL_GEN(dev_priv) == 9) gen9_sseu_info_init(dev_priv); + else if (INTEL_GEN(dev_priv) >= 10) + gen10_sseu_info_init(dev_priv);DRM_DEBUG_DRIVER ("slice mask: %04x\n" , info->sseu.slice_mask);DRM_DEBUG_DRIVER ("slice total: %u\n" ,hweight8 (info->sseu.slice_mask));
Signature · 6 lines
2.13.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerPATCH 2/2 drm/i915/cnl: Fix SSEU Device Status.
CNL adds an extra register for slice/subslice information. Although no SKU is planed with an extra slice let's already handle this extra piece of information so we don't have the risk in future of getting a part that might have chosen this part of the die instead of other slices or anything like that.
Also if subslice is disabled the information of eu ack for that is garbage, so let's skip checks for eu if subslice is disabled as we skip the subslice if slice is disabled.
The rest is pretty much like gen9.
--- drivers/gpu/drm/i915/i915_debugfs.c | 52 ++++++++++++++++++++++++++++++++++++- drivers/gpu/drm/i915/i915_reg.h | 6 +++++ 2 files changed, 57 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_debugfs.c +51 -1
@@ -4575,6 +4575,54 @@ static void cherryview_sseu_device_status(struct drm_i915_private *dev_priv, } } +static void gen10_sseu_device_status (struct drm_i915_private *dev_priv, +struct sseu_dev_info *sseu) +{ +const struct intel_device_info *info =INTEL_INFO (dev_priv); +int s_max =4 , ss_max =3 ; +int s, ss; +u32 s_reg[s_max], eu_reg[2 * s_max], eu_mask[2 ]; + +for (s =0 ; s < s_max; s++) { + s_reg[s] =I915_READ (GEN10_SLICE_PGCTL_ACK (s)); + eu_reg[2 * s] =I915_READ (GEN10_SS01_EU_PGCTL_ACK (s)); + eu_reg[2 * s +1 ] =I915_READ (GEN10_SS23_EU_PGCTL_ACK (s)); + } + + eu_mask[0 ] =GEN9_PGCTL_SSA_EU08_ACK | +GEN9_PGCTL_SSA_EU19_ACK | +GEN9_PGCTL_SSA_EU210_ACK | +GEN9_PGCTL_SSA_EU311_ACK ; + eu_mask[1 ] =GEN9_PGCTL_SSB_EU08_ACK | +GEN9_PGCTL_SSB_EU19_ACK | +GEN9_PGCTL_SSB_EU210_ACK | +GEN9_PGCTL_SSB_EU311_ACK ; + +for (s =0 ; s < s_max; s++) { +if ((s_reg[s] &GEN9_PGCTL_SLICE_ACK ) ==0 ) +/* skip disabled slice */ +continue ; + + sseu->slice_mask |=BIT (s); + sseu->subslice_mask = info->sseu.subslice_mask; + +for (ss =0 ; ss < ss_max; ss++) { +unsigned int eu_cnt; + +if (!(s_reg[s] & (GEN9_PGCTL_SS_ACK (ss)))) +/* skip disabled subslice */ +continue ; + + eu_cnt =2 *hweight32 (eu_reg[2 * s + ss /2 ] & + eu_mask[ss %2 ]); + sseu->eu_total += eu_cnt; + sseu->eu_per_subslice = max_t(unsigned int, + sseu->eu_per_subslice, + eu_cnt); + } + } +} +static void gen9_sseu_device_status (struct drm_i915_private *dev_priv,struct sseu_dev_info *sseu) {
@@ -4716,8 +4764,10 @@ static int i915_sseu_status(struct seq_file *m, void *unused)cherryview_sseu_device_status (dev_priv, &sseu); }else if (IS_BROADWELL (dev_priv)) {broadwell_sseu_device_status (dev_priv, &sseu); - }else if (INTEL_GEN (dev_priv) >=9 ) { + }else if (IS_GEN9 (dev_priv)) {gen9_sseu_device_status (dev_priv, &sseu); + }else if (INTEL_GEN (dev_priv) >=10 ) { +gen10_sseu_device_status (dev_priv, &sseu); }intel_runtime_pm_put (dev_priv);
drivers/gpu/drm/i915/i915_reg.h +6 -0
@@ -8018,11 +8018,17 @@ enum {#define CHV_EU311_PG_ENABLE (1<<1)#define GEN9_SLICE_PGCTL_ACK (slice) _MMIO(0x804c + (slice)*0x4) +#define GEN10_SLICE_PGCTL_ACK (slice) ((slice) == 3 ? _MMIO(0x8080) : \ + GEN9_SLICE_PGCTL_ACK((slice)))#define GEN9_PGCTL_SLICE_ACK (1 << 0)#define GEN9_PGCTL_SS_ACK (subslice) (1 << (2 + (subslice)*2))#define GEN9_SS01_EU_PGCTL_ACK (slice) _MMIO(0x805c + (slice)*0x8) +#define GEN10_SS01_EU_PGCTL_ACK (slice) ((slice) == 3 ? _MMIO(0x808c) : \ + GEN9_SS01_EU_PGCTL_ACK((slice)))#define GEN9_SS23_EU_PGCTL_ACK (slice) _MMIO(0x8060 + (slice)*0x8) +#define GEN10_SS23_EU_PGCTL_ACK (slice) ((slice) == 3 ? _MMIO(0x8090) : \ + GEN9_SS23_EU_PGCTL_ACK((slice)))#define GEN9_PGCTL_SSA_EU08_ACK (1 << 0)#define GEN9_PGCTL_SSA_EU19_ACK (1 << 2)#define GEN9_PGCTL_SSA_EU210_ACK (1 << 4)
Signature · 6 lines
2.13.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915/cnl: Fix SSEU Device Status.
Quoted 102 lines · Rodrigo Vivi
CNL adds an extra register for slice/subslice information. Although no SKU is planed with an extra slice let's already handle this extra piece of information so we don't have the risk in future of getting a part that might have chosen this part of the die instead of other slices or anything like that.
Also if subslice is disabled the information of eu ack for that is garbage, so let's skip checks for eu if subslice is disabled as we skip the subslice if slice is disabled.
The rest is pretty much like gen9.
Cc Oscar Mateo <[email protected]>Signed-off-by Rodrigo Vivi <[email protected]>--- drivers/gpu/drm/i915/i915_debugfs.c | 52 ++++++++++++++++++++++++++++++++++++- drivers/gpu/drm/i915/i915_reg.h | 6 +++++ 2 files changed, 57 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/i915_debugfs.c +51
-1@@ -4575,6 +4575,54 @@ static void cherryview_sseu_device_status(struct drm_i915_private *dev_priv, } } +static void gen10_sseu_device_status (struct drm_i915_private *dev_priv, +struct sseu_dev_info *sseu) +{ +const struct intel_device_info *info =INTEL_INFO (dev_priv); +int s_max =4 , ss_max =3 ; +int s, ss; +u32 s_reg[s_max], eu_reg[2 * s_max], eu_mask[2 ]; + +for (s =0 ; s < s_max; s++) { + s_reg[s] =I915_READ (GEN10_SLICE_PGCTL_ACK (s)); + eu_reg[2 * s] =I915_READ (GEN10_SS01_EU_PGCTL_ACK (s)); + eu_reg[2 * s +1 ] =I915_READ (GEN10_SS23_EU_PGCTL_ACK (s)); + } + + eu_mask[0 ] =GEN9_PGCTL_SSA_EU08_ACK | +GEN9_PGCTL_SSA_EU19_ACK | +GEN9_PGCTL_SSA_EU210_ACK | +GEN9_PGCTL_SSA_EU311_ACK ; + eu_mask[1 ] =GEN9_PGCTL_SSB_EU08_ACK | +GEN9_PGCTL_SSB_EU19_ACK | +GEN9_PGCTL_SSB_EU210_ACK | +GEN9_PGCTL_SSB_EU311_ACK ; + +for (s =0 ; s < s_max; s++) { +if ((s_reg[s] &GEN9_PGCTL_SLICE_ACK ) ==0 ) +/* skip disabled slice */ +continue ; + + sseu->slice_mask |=BIT (s); + sseu->subslice_mask = info->sseu.subslice_mask; + +for (ss =0 ; ss < ss_max; ss++) { +unsigned int eu_cnt; + +if (!(s_reg[s] & (GEN9_PGCTL_SS_ACK (ss)))) +/* skip disabled subslice */ +continue ; + + eu_cnt =2 *hweight32 (eu_reg[2 * s + ss /2 ] & + eu_mask[ss %2 ]); + sseu->eu_total += eu_cnt; + sseu->eu_per_subslice = max_t(unsigned int, + sseu->eu_per_subslice, + eu_cnt); + } + } +} +static void gen9_sseu_device_status (struct drm_i915_private *dev_priv,struct sseu_dev_info *sseu) {@@ -4716,8 +4764,10 @@ static int i915_sseu_status(struct seq_file *m, void *unused)cherryview_sseu_device_status (dev_priv, &sseu); }else if (IS_BROADWELL (dev_priv)) {broadwell_sseu_device_status (dev_priv, &sseu); - }else if (INTEL_GEN (dev_priv) >=9 ) { + }else if (IS_GEN9 (dev_priv)) {gen9_sseu_device_status (dev_priv, &sseu); + }else if (INTEL_GEN (dev_priv) >=10 ) { +gen10_sseu_device_status (dev_priv, &sseu); }intel_runtime_pm_put (dev_priv);drivers/gpu/drm/i915/i915_reg.h +2
-0@@ -8018,11 +8018,17 @@ enum {#define CHV_EU311_PG_ENABLE (1<<1)#define GEN9_SLICE_PGCTL_ACK (slice) _MMIO(0x804c + (slice)*0x4) +#define GEN10_SLICE_PGCTL_ACK (slice) ((slice) == 3 ? _MMIO(0x8080) : \ + GEN9_SLICE_PGCTL_ACK((slice)))#define GEN9_PGCTL_SLICE_ACK (1 << 0)#define GEN9_PGCTL_SS_ACK (subslice) (1 << (2 + (subslice)*2))
drivers/gpu/drm/i915/i915_reg.h enum { · line 8034
Quoted 10 lines
drivers/gpu/drm/i915/i915_reg.h +4
-0#define GEN9_SS01_EU_PGCTL_ACK (slice) _MMIO(0x805c + (slice)*0x8) +#define GEN10_SS01_EU_PGCTL_ACK (slice) ((slice) == 3 ? _MMIO(0x808c) : \ + GEN9_SS01_EU_PGCTL_ACK((slice)))#define GEN9_SS23_EU_PGCTL_ACK (slice) _MMIO(0x8060 + (slice)*0x8) +#define GEN10_SS23_EU_PGCTL_ACK (slice) ((slice) == 3 ? _MMIO(0x8090) : \ + GEN9_SS23_EU_PGCTL_ACK((slice)))#define GEN9_PGCTL_SSA_EU08_ACK (1 << 0)#define GEN9_PGCTL_SSA_EU19_ACK (1 << 2)#define GEN9_PGCTL_SSA_EU210_ACK (1 << 4)
Now there is an IS_CANNONLAKE check that can be removed from gen9_sseu_device_status (1dd7a3e, "drm/i915/cnl: Add slice and subslice information to debugfs").
Apart from that:
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915/cnl: Add support slice/subslice/eu configs
In reply to Rodrigo Vivi== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915/cnl: Add support slice/subslice/eu configs
URL : https://patchwork.freedesktop.org/series/30549/
State : success
== Summary ==
Series 30549v1 series starting with [1/2] drm/i915/cnl: Add support slice/subslice/eu configs
https://patchwork.freedesktop.org/api/1.0/series/30549/revisions/1/mbox/
Test chamelium:
Subgroup common-hpd-after-suspend:
dmesg-warn -> INCOMPLETE (fi-kbl-7500u) fdo#102505
Test pm_rpm:
Subgroup basic-rte:
pass -> DMESG-WARN (fi-cfl-s) fdo#102294
Test drv_module_reload:
Subgroup basic-reload-inject:
dmesg-warn -> INCOMPLETE (fi-cfl-s) k.org#196765fdo#102505 https://bugs.freedesktop.org/show_bug.cgi?id=102505
fdo#102294 https://bugs.freedesktop.org/show_bug.cgi?id=102294
k.org#196765 https://bugzilla.kernel.org/show_bug.cgi?id=196765
fi-bdw-5557u total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:457s fi-bdw-gvtdvm total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:473s fi-blb-e6850 total:289 pass:224 dwarn:1 dfail:0 fail:0 skip:64 time:418s fi-bsw-n3050 total:289 pass:243 dwarn:0 dfail:0 fail:0 skip:46 time:529s fi-bwr-2160 total:289 pass:184 dwarn:0 dfail:0 fail:0 skip:105 time:278s fi-bxt-j4205 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:501s fi-byt-j1900 total:289 pass:254 dwarn:1 dfail:0 fail:0 skip:34 time:500s fi-cfl-s total:288 pass:222 dwarn:34 dfail:0 fail:0 skip:31 fi-elk-e7500 total:289 pass:230 dwarn:0 dfail:0 fail:0 skip:59 time:427s fi-glk-1 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:575s fi-hsw-4770 total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:433s fi-hsw-4770r total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:412s fi-ilk-650 total:289 pass:229 dwarn:0 dfail:0 fail:0 skip:60 time:432s fi-ivb-3520m total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:495s fi-ivb-3770 total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:467s fi-kbl-7500u total:9 pass:3 dwarn:0 dfail:0 fail:0 skip:5 fi-kbl-7560u total:289 pass:270 dwarn:0 dfail:0 fail:0 skip:19 time:585s fi-kbl-r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:594s fi-pnv-d510 total:289 pass:223 dwarn:1 dfail:0 fail:0 skip:65 time:547s fi-skl-6260u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:456s fi-skl-6700k total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:759s fi-skl-6770hq total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:499s fi-skl-gvtdvm total:289 pass:266 dwarn:0 dfail:0 fail:0 skip:23 time:478s fi-snb-2520m total:289 pass:251 dwarn:0 dfail:0 fail:0 skip:38 time:576s fi-snb-2600 total:289 pass:250 dwarn:0 dfail:0 fail:0 skip:39 time:424s
fi-byt-n2820 failed to connect after reboot
a7b0939454cd452880780131dd4c121d89325ed7 drm-tip: 2017y-09m-19d-09h-18m-06s UTC integration manifest 7a1334f53da7 drm/i915/cnl: Fix SSEU Device Status.49dc06c6f975 drm/i915/cnl: Add support slice/subslice/eu configs
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5741/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for series starting with [1/2] drm/i915/cnl: Add support slice/subslice/eu configs
In reply to Rodrigo Vivi== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915/cnl: Add support slice/subslice/eu configs
URL : https://patchwork.freedesktop.org/series/30549/
State : success
== Summary ==
Test gem_cpu_reloc:
Subgroup full:
incomplete -> PASS (shard-hsw)shard-hsw total:2314 pass:1247 dwarn:0 dfail:0 fail:11 skip:1056 time:9640s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5741/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 65 lines · Rodrigo Vivi
From: Ben Widawsky <[email protected]>
Cannonlake Slice and Subslice information has changed.
This patch initially provided by Ben adds the proper sseu initialization.
v2: This v2 done by Rodrigo includes:
- Fix on Total slices count by avoiding [1][2] and [2][2].
- Inclusion of EU Per Subslice.
- Commit message.
v3: This v3 done by Rodrigo includes:
- Handle all possible bits and extra fuse register.
- UseINTEL_GENmacro.
- Fully assume uniform distribution so remove union witheu_per_subsliceand add proper the comment.Cc Oscar Mateo <[email protected]>Signed-off-by Ben Widawsky <[email protected]>Signed-off-by Rodrigo Vivi <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 8 +++++++ drivers/gpu/drm/i915/intel_device_info.c | 37 +++++++++++++++++++++++++++++++- 2 files changed, 44 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/i915_reg.h +8
-0@@ -2730,6 +2730,11 @@ enum i915_power_well_id {#define GEN9_F2_SS_DIS_SHIFT 20#define GEN9_F2_SS_DIS_MASK (0xf << GEN9_F2_SS_DIS_SHIFT) +#define GEN10_F2_S_ENA_SHIFT 22 +#define GEN10_F2_S_ENA_MASK (0xf << GEN10_F2_S_ENA_SHIFT) +#define GEN10_F2_SS_DIS_SHIFT 18 +#define GEN10_F2_SS_DIS_MASK (0x7 << GEN10_F2_SS_DIS_SHIFT) +#define GEN8_EU_DISABLE0 _MMIO(0x9134)#define GEN8_EU_DIS0_S0_MASK 0xffffff#define GEN8_EU_DIS0_S1_SHIFT 24@@ -2745,6 +2750,9 @@ enum i915_power_well_id {#define GEN9_EU_DISABLE (slice) _MMIO(0x9134 + (slice)*0x4) +#define GEN10_EU_DISABLE3 _MMIO(0x9140) +#define GEN10_EU_DIS_SS_MASK 0xff +#define GEN6_BSD_SLEEP_PSMI_CONTROL _MMIO(0x12050)#define GEN6_BSD_SLEEP_MSG_DISABLE (1 << 0)#define GEN6_BSD_SLEEP_FLUSH_DISABLE (1 << 2)drivers/gpu/drm/i915/intel_device_info.c +6
-0@@ -82,6 +82,39 @@ void intel_device_info_dump(struct drm_i915_private *dev_priv)#undef PRINT_FLAG } +static void gen10_sseu_info_init (struct drm_i915_private *dev_priv) +{ +struct sseu_dev_info *sseu = &mkwrite_device_info (dev_priv)->sseu; +const u32 fuse2 =I915_READ (GEN8_FUSE2 ); + + sseu->slice_mask = (fuse2 & GEN10_F2_S_ENA_MASK) >>
drivers/gpu/drm/i915/intel_device_info.c void intel_device_info_dump(struct drm_i915_private *dev_priv) · line 100
Quoted 10 lines
drivers/gpu/drm/i915/intel_device_info.c +10
-0+GEN10_F2_S_ENA_SHIFT ; + sseu->subslice_mask = (1 <<3 ) -1 ; + sseu->subslice_mask &= ~((fuse2 &GEN10_F2_SS_DIS_MASK ) >> +GEN10_F2_SS_DIS_SHIFT ); + + sseu->eu_total =hweight32 (~I915_READ (GEN8_EU_DISABLE0 )); + sseu->eu_total +=hweight32 (~I915_READ (GEN8_EU_DISABLE1 )); + sseu->eu_total +=hweight32 (~I915_READ (GEN8_EU_DISABLE2 )); + sseu->eu_total +=hweight8 (~(I915_READ (GEN10_EU_DISABLE3 ) & +GEN10_EU_DIS_SS_MASK ));
This looks better than before, but since we are only reading 4 bits for the slice mask (GEN10_F2_S_ENA_MASK = 0xf), why do we bother with slices 4 and 5 for the EU count?
Quoted 21 lines
drivers/gpu/drm/i915/intel_device_info.c +16
-0+/* +* CNL is expected to always have a uniform distribution +* of EU across subslices with the exception that any one +* EU in any one subslice may be fused off for die +* recovery. +*/ + sseu->eu_per_subslice =sseu_subslice_total (sseu) ? +DIV_ROUND_UP (sseu->eu_total, +sseu_subslice_total (sseu)) :0 ; + +/* No restrictions on Power Gating */ + sseu->has_slice_pg =1 ; + sseu->has_subslice_pg =1 ; + sseu->has_eu_pg =1 ; +} +static void cherryview_sseu_info_init (struct drm_i915_private *dev_priv) {struct sseu_dev_info *sseu = &mkwrite_device_info (dev_priv)->sseu;@@ -409,8 +442,10 @@ void intel_device_info_runtime_init(struct drm_i915_private *dev_priv)cherryview_sseu_info_init (dev_priv);
drivers/gpu/drm/i915/intel_device_info.c void intel_device_info_runtime_init(struct drm_i915_private *dev_priv) · line 451
Quoted 10 lines
drivers/gpu/drm/i915/intel_device_info.c +3
-1else if (IS_BROADWELL (dev_priv))broadwell_sseu_info_init (dev_priv); -else if (INTEL_INFO (dev_priv)->gen >=9 ) +else if (INTEL_GEN (dev_priv) ==9 )gen9_sseu_info_init (dev_priv); +else if (INTEL_GEN (dev_priv) >=10 ) +gen10_sseu_info_init (dev_priv);DRM_DEBUG_DRIVER ("slice mask: %04x\n" , info->sseu.slice_mask);DRM_DEBUG_DRIVER ("slice total: %u\n" ,hweight8 (info->sseu.slice_mask));
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerPATCH 1/2 drm/i915/cnl: Add support slice/subslice/eu configs
From: Ben Widawsky <[email protected]>
Cannonlake Slice and Subslice information has changed.
This patch initially provided by Ben adds the proper sseu initialization.
v2: This v2 done by Rodrigo includes:
- Fix on Total slices count by avoiding [1][2] and [2][2].
- Inclusion of EU Per Subslice.
- Commit message.
v3: This v3 done by Rodrigo includes:
- Handle all possible bits and extra fuse register.
- Use INTEL_GEN macro.
- Fully assume uniform distribution so remove union with eu_per_subslice and add proper the comment.
v4: This v4 done by Rodrigo includes:
- Consider all bits available: 6 bits for slices [27:22] and 4 for subslices [21:18].
--- drivers/gpu/drm/i915/i915_reg.h | 8 +++++++ drivers/gpu/drm/i915/intel_device_info.c | 37 +++++++++++++++++++++++++++++++- 2 files changed, 44 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_reg.h +8 -0
@@ -2730,6 +2730,11 @@ enum i915_power_well_id {#define GEN9_F2_SS_DIS_SHIFT 20#define GEN9_F2_SS_DIS_MASK (0xf << GEN9_F2_SS_DIS_SHIFT) +#define GEN10_F2_S_ENA_SHIFT 22 +#define GEN10_F2_S_ENA_MASK (0x3f << GEN10_F2_S_ENA_SHIFT) +#define GEN10_F2_SS_DIS_SHIFT 18 +#define GEN10_F2_SS_DIS_MASK (0xf << GEN10_F2_SS_DIS_SHIFT) +#define GEN8_EU_DISABLE0 _MMIO(0x9134)#define GEN8_EU_DIS0_S0_MASK 0xffffff#define GEN8_EU_DIS0_S1_SHIFT 24
@@ -2745,6 +2750,9 @@ enum i915_power_well_id {#define GEN9_EU_DISABLE (slice) _MMIO(0x9134 + (slice)*0x4) +#define GEN10_EU_DISABLE3 _MMIO(0x9140) +#define GEN10_EU_DIS_SS_MASK 0xff +#define GEN6_BSD_SLEEP_PSMI_CONTROL _MMIO(0x12050)#define GEN6_BSD_SLEEP_MSG_DISABLE (1 << 0)#define GEN6_BSD_SLEEP_FLUSH_DISABLE (1 << 2)
drivers/gpu/drm/i915/intel_device_info.c +36 -1
@@ -82,6 +82,39 @@ void intel_device_info_dump(struct drm_i915_private *dev_priv)#undef PRINT_FLAG } +static void gen10_sseu_info_init (struct drm_i915_private *dev_priv) +{ +struct sseu_dev_info *sseu = &mkwrite_device_info (dev_priv)->sseu; +const u32 fuse2 =I915_READ (GEN8_FUSE2 ); + + sseu->slice_mask = (fuse2 &GEN10_F2_S_ENA_MASK ) >> +GEN10_F2_S_ENA_SHIFT ; + sseu->subslice_mask = (1 <<3 ) -1 ; + sseu->subslice_mask &= ~((fuse2 &GEN10_F2_SS_DIS_MASK ) >> +GEN10_F2_SS_DIS_SHIFT ); + + sseu->eu_total =hweight32 (~I915_READ (GEN8_EU_DISABLE0 )); + sseu->eu_total +=hweight32 (~I915_READ (GEN8_EU_DISABLE1 )); + sseu->eu_total +=hweight32 (~I915_READ (GEN8_EU_DISABLE2 )); + sseu->eu_total +=hweight8 (~(I915_READ (GEN10_EU_DISABLE3 ) & +GEN10_EU_DIS_SS_MASK )); + +/* +* CNL is expected to always have a uniform distribution +* of EU across subslices with the exception that any one +* EU in any one subslice may be fused off for die +* recovery. +*/ + sseu->eu_per_subslice =sseu_subslice_total (sseu) ? +DIV_ROUND_UP (sseu->eu_total, +sseu_subslice_total (sseu)) :0 ; + +/* No restrictions on Power Gating */ + sseu->has_slice_pg =1 ; + sseu->has_subslice_pg =1 ; + sseu->has_eu_pg =1 ; +} +static void cherryview_sseu_info_init (struct drm_i915_private *dev_priv) {struct sseu_dev_info *sseu = &mkwrite_device_info (dev_priv)->sseu;
@@ -409,8 +442,10 @@ void intel_device_info_runtime_init(struct drm_i915_private *dev_priv)cherryview_sseu_info_init (dev_priv); else if (IS_BROADWELL(dev_priv)) broadwell_sseu_info_init(dev_priv); - else if (INTEL_INFO(dev_priv)->gen >= 9) + else if (INTEL_GEN(dev_priv) == 9) gen9_sseu_info_init(dev_priv); + else if (INTEL_GEN(dev_priv) >= 10) + gen10_sseu_info_init(dev_priv);DRM_DEBUG_DRIVER ("slice mask: %04x\n" , info->sseu.slice_mask);DRM_DEBUG_DRIVER ("slice total: %u\n" ,hweight8 (info->sseu.slice_mask));
Signature · 6 lines
2.13.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerPATCH 2/2 drm/i915/cnl: Fix SSEU Device Status.
CNL adds an extra register for slice/subslice information. Although no SKU is planed with an extra slice let's already handle this extra piece of information so we don't have the risk in future of getting a part that might have chosen this part of the die instead of other slices or anything like that.
Also if subslice is disabled the information of eu ack for that is garbage, so let's skip checks for eu if subslice is disabled as we skip the subslice if slice is disabled.
The rest is pretty much like gen9.
v2: Remove IS_CANNONLAKE from gen9 status function.
--- drivers/gpu/drm/i915/i915_debugfs.c | 54 +++++++++++++++++++++++++++++++++++-- drivers/gpu/drm/i915/i915_reg.h | 6 +++++ 2 files changed, 58 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +52 -2
@@ -4575,6 +4575,54 @@ static void cherryview_sseu_device_status(struct drm_i915_private *dev_priv, } } +static void gen10_sseu_device_status (struct drm_i915_private *dev_priv, +struct sseu_dev_info *sseu) +{ +const struct intel_device_info *info =INTEL_INFO (dev_priv); +int s_max =4 , ss_max =3 ; +int s, ss; +u32 s_reg[s_max], eu_reg[2 * s_max], eu_mask[2 ]; + +for (s =0 ; s < s_max; s++) { + s_reg[s] =I915_READ (GEN10_SLICE_PGCTL_ACK (s)); + eu_reg[2 * s] =I915_READ (GEN10_SS01_EU_PGCTL_ACK (s)); + eu_reg[2 * s +1 ] =I915_READ (GEN10_SS23_EU_PGCTL_ACK (s)); + } + + eu_mask[0 ] =GEN9_PGCTL_SSA_EU08_ACK | +GEN9_PGCTL_SSA_EU19_ACK | +GEN9_PGCTL_SSA_EU210_ACK | +GEN9_PGCTL_SSA_EU311_ACK ; + eu_mask[1 ] =GEN9_PGCTL_SSB_EU08_ACK | +GEN9_PGCTL_SSB_EU19_ACK | +GEN9_PGCTL_SSB_EU210_ACK | +GEN9_PGCTL_SSB_EU311_ACK ; + +for (s =0 ; s < s_max; s++) { +if ((s_reg[s] &GEN9_PGCTL_SLICE_ACK ) ==0 ) +/* skip disabled slice */ +continue ; + + sseu->slice_mask |=BIT (s); + sseu->subslice_mask = info->sseu.subslice_mask; + +for (ss =0 ; ss < ss_max; ss++) { +unsigned int eu_cnt; + +if (!(s_reg[s] & (GEN9_PGCTL_SS_ACK (ss)))) +/* skip disabled subslice */ +continue ; + + eu_cnt =2 *hweight32 (eu_reg[2 * s + ss /2 ] & + eu_mask[ss %2 ]); + sseu->eu_total += eu_cnt; + sseu->eu_per_subslice = max_t(unsigned int, + sseu->eu_per_subslice, + eu_cnt); + } + } +} +static void gen9_sseu_device_status (struct drm_i915_private *dev_priv,struct sseu_dev_info *sseu) {
@@ -4610,7 +4658,7 @@ static void gen9_sseu_device_status(struct drm_i915_private *dev_priv, sseu->slice_mask |=BIT (s); -if (IS_GEN9_BC (dev_priv) ||IS_CANNONLAKE (dev_priv)) +if (IS_GEN9_BC (dev_priv)) sseu->subslice_mask =INTEL_INFO (dev_priv)->sseu.subslice_mask;
@@ -4716,8 +4764,10 @@ static int i915_sseu_status(struct seq_file *m, void *unused)cherryview_sseu_device_status (dev_priv, &sseu); }else if (IS_BROADWELL (dev_priv)) {broadwell_sseu_device_status (dev_priv, &sseu); - }else if (INTEL_GEN (dev_priv) >=9 ) { + }else if (IS_GEN9 (dev_priv)) {gen9_sseu_device_status (dev_priv, &sseu); + }else if (INTEL_GEN (dev_priv) >=10 ) { +gen10_sseu_device_status (dev_priv, &sseu); }intel_runtime_pm_put (dev_priv);
drivers/gpu/drm/i915/i915_reg.h +6 -0
@@ -8018,11 +8018,17 @@ enum {#define CHV_EU311_PG_ENABLE (1<<1)#define GEN9_SLICE_PGCTL_ACK (slice) _MMIO(0x804c + (slice)*0x4) +#define GEN10_SLICE_PGCTL_ACK (slice) ((slice) == 3 ? _MMIO(0x8080) : \ + GEN9_SLICE_PGCTL_ACK((slice)))#define GEN9_PGCTL_SLICE_ACK (1 << 0)#define GEN9_PGCTL_SS_ACK (subslice) (1 << (2 + (subslice)*2))#define GEN9_SS01_EU_PGCTL_ACK (slice) _MMIO(0x805c + (slice)*0x8) +#define GEN10_SS01_EU_PGCTL_ACK (slice) ((slice) == 3 ? _MMIO(0x808c) : \ + GEN9_SS01_EU_PGCTL_ACK((slice)))#define GEN9_SS23_EU_PGCTL_ACK (slice) _MMIO(0x8060 + (slice)*0x8) +#define GEN10_SS23_EU_PGCTL_ACK (slice) ((slice) == 3 ? _MMIO(0x8090) : \ + GEN9_SS23_EU_PGCTL_ACK((slice)))#define GEN9_PGCTL_SSA_EU08_ACK (1 << 0)#define GEN9_PGCTL_SSA_EU19_ACK (1 << 2)#define GEN9_PGCTL_SSA_EU210_ACK (1 << 4)
Signature · 6 lines
2.13.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 33 lines · Rodrigo Vivi
From: Ben Widawsky <[email protected]>
Cannonlake Slice and Subslice information has changed.
This patch initially provided by Ben adds the proper sseu initialization.
v2: This v2 done by Rodrigo includes:
- Fix on Total slices count by avoiding [1][2] and [2][2].
- Inclusion of EU Per Subslice.
- Commit message.
v3: This v3 done by Rodrigo includes:
- Handle all possible bits and extra fuse register.
- UseINTEL_GENmacro.
- Fully assume uniform distribution so remove union witheu_per_subsliceand add proper the comment.
v4: This v4 done by Rodrigo includes:
- Consider all bits available: 6 bits for slices [27:22] and 4 for subslices [21:18].Cc Oscar Mateo <[email protected]>Signed-off-by Ben Widawsky <[email protected]>Signed-off-by Rodrigo Vivi <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 8 +++++++ drivers/gpu/drm/i915/intel_device_info.c | 37 +++++++++++++++++++++++++++++++- 2 files changed, 44 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/i915_reg.h +0
-0
drivers/gpu/drm/i915/i915_reg.h enum i915_power_well_id { · line 2736
Quoted 7 lines
drivers/gpu/drm/i915/i915_reg.h +4
-0@@ -2730,6 +2730,11 @@ enum i915_power_well_id {#define GEN9_F2_SS_DIS_SHIFT 20#define GEN9_F2_SS_DIS_MASK (0xf << GEN9_F2_SS_DIS_SHIFT) +#define GEN10_F2_S_ENA_SHIFT 22 +#define GEN10_F2_S_ENA_MASK (0x3f << GEN10_F2_S_ENA_SHIFT) +#define GEN10_F2_SS_DIS_SHIFT 18 +#define GEN10_F2_SS_DIS_MASK (0xf << GEN10_F2_SS_DIS_SHIFT)
Hmmmm... I thought you were going to read less registers for the EU count, but yes, this also works :)
Quoted 20 lines
drivers/gpu/drm/i915/i915_reg.h +4
-0+#define GEN8_EU_DISABLE0 _MMIO(0x9134)#define GEN8_EU_DIS0_S0_MASK 0xffffff#define GEN8_EU_DIS0_S1_SHIFT 24@@ -2745,6 +2750,9 @@ enum i915_power_well_id {#define GEN9_EU_DISABLE (slice) _MMIO(0x9134 + (slice)*0x4) +#define GEN10_EU_DISABLE3 _MMIO(0x9140) +#define GEN10_EU_DIS_SS_MASK 0xff +#define GEN6_BSD_SLEEP_PSMI_CONTROL _MMIO(0x12050)#define GEN6_BSD_SLEEP_MSG_DISABLE (1 << 0)#define GEN6_BSD_SLEEP_FLUSH_DISABLE (1 << 2)drivers/gpu/drm/i915/intel_device_info.c +0
-0@@ -82,6 +82,39 @@ void intel_device_info_dump(struct drm_i915_private *dev_priv)#undef PRINT_FLAG
drivers/gpu/drm/i915/intel_device_info.c void intel_device_info_dump(struct drm_i915_private *dev_priv) · line 92
Quoted 10 lines
drivers/gpu/drm/i915/intel_device_info.c +8
-0} +static void gen10_sseu_info_init (struct drm_i915_private *dev_priv) +{ +struct sseu_dev_info *sseu = &mkwrite_device_info (dev_priv)->sseu; +const u32 fuse2 =I915_READ (GEN8_FUSE2 ); + + sseu->slice_mask = (fuse2 &GEN10_F2_S_ENA_MASK ) >> +GEN10_F2_S_ENA_SHIFT ; + sseu->subslice_mask = (1 <<3 ) -1 ;
But this should be now: (1 << 4) - 1 (or maybe use a local ss_max for clarity, like in the other patch)
Quoted 30 lines
drivers/gpu/drm/i915/intel_device_info.c +25
-0+ sseu->subslice_mask &= ~((fuse2 &GEN10_F2_SS_DIS_MASK ) >> +GEN10_F2_SS_DIS_SHIFT ); + + sseu->eu_total =hweight32 (~I915_READ (GEN8_EU_DISABLE0 )); + sseu->eu_total +=hweight32 (~I915_READ (GEN8_EU_DISABLE1 )); + sseu->eu_total +=hweight32 (~I915_READ (GEN8_EU_DISABLE2 )); + sseu->eu_total +=hweight8 (~(I915_READ (GEN10_EU_DISABLE3 ) & +GEN10_EU_DIS_SS_MASK )); + +/* +* CNL is expected to always have a uniform distribution +* of EU across subslices with the exception that any one +* EU in any one subslice may be fused off for die +* recovery. +*/ + sseu->eu_per_subslice =sseu_subslice_total (sseu) ? +DIV_ROUND_UP (sseu->eu_total, +sseu_subslice_total (sseu)) :0 ; + +/* No restrictions on Power Gating */ + sseu->has_slice_pg =1 ; + sseu->has_subslice_pg =1 ; + sseu->has_eu_pg =1 ; +} +static void cherryview_sseu_info_init (struct drm_i915_private *dev_priv) {struct sseu_dev_info *sseu = &mkwrite_device_info (dev_priv)->sseu;@@ -409,8 +442,10 @@ void intel_device_info_runtime_init(struct drm_i915_private *dev_priv)cherryview_sseu_info_init (dev_priv);
drivers/gpu/drm/i915/intel_device_info.c void intel_device_info_runtime_init(struct drm_i915_private *dev_priv) · line 451
Quoted 10 lines
drivers/gpu/drm/i915/intel_device_info.c +3
-1else if (IS_BROADWELL (dev_priv))broadwell_sseu_info_init (dev_priv); -else if (INTEL_INFO (dev_priv)->gen >=9 ) +else if (INTEL_GEN (dev_priv) ==9 )gen9_sseu_info_init (dev_priv); +else if (INTEL_GEN (dev_priv) >=10 ) +gen10_sseu_info_init (dev_priv);DRM_DEBUG_DRIVER ("slice mask: %04x\n" , info->sseu.slice_mask);DRM_DEBUG_DRIVER ("slice total: %u\n" ,hweight8 (info->sseu.slice_mask));
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for series starting with [1/2] drm/i915/cnl: Add support slice/subslice/eu configs (rev2)
In reply to Rodrigo Vivi== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915/cnl: Add support slice/subslice/eu configs (rev2)
URL : https://patchwork.freedesktop.org/series/30549/
State : failure
== Summary ==
Series 30549v2 series starting with [1/2] drm/i915/cnl: Add support slice/subslice/eu configs
https://patchwork.freedesktop.org/api/1.0/series/30549/revisions/2/mbox/
Test gem_exec_suspend:
Subgroup basic-s3:
pass -> INCOMPLETE (fi-kbl-r) fdo#102850
Test kms_cursor_legacy:
Subgroup basic-busy-flip-before-cursor-atomic:
pass -> FAIL (fi-snb-2600) fdo#100215
Test kms_flip:
Subgroup basic-flip-vs-wf_vblank:
pass -> INCOMPLETE (fi-bxt-j4205)
Test kms_frontbuffer_tracking:
Subgroup basic:
dmesg-warn -> PASS (fi-kbl-7500u)
Test kms_pipe_crc_basic:
Subgroup hang-read-crc-pipe-b:
incomplete -> DMESG-WARN (fi-cfl-s) fdo#102294
Subgroup suspend-read-crc-pipe-a:
incomplete -> PASS (fi-kbl-7500u)
Test drv_module_reload:
Subgroup basic-reload-inject:
pass -> DMESG-WARN (fi-glk-1) fdo#102777fdo#102850 https://bugs.freedesktop.org/show_bug.cgi?id=102850
fdo#100215 https://bugs.freedesktop.org/show_bug.cgi?id=100215
fdo#102294 https://bugs.freedesktop.org/show_bug.cgi?id=102294
fdo#102777 https://bugs.freedesktop.org/show_bug.cgi?id=102777
fi-bdw-5557u total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:440s fi-bdw-gvtdvm total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:467s fi-blb-e6850 total:289 pass:224 dwarn:1 dfail:0 fail:0 skip:64 time:416s fi-bsw-n3050 total:289 pass:243 dwarn:0 dfail:0 fail:0 skip:46 time:509s fi-bwr-2160 total:289 pass:184 dwarn:0 dfail:0 fail:0 skip:105 time:278s fi-bxt-j4205 total:219 pass:197 dwarn:0 dfail:0 fail:0 skip:21 fi-byt-j1900 total:289 pass:254 dwarn:1 dfail:0 fail:0 skip:34 time:494s fi-byt-n2820 total:289 pass:250 dwarn:1 dfail:0 fail:0 skip:38 time:486s fi-cfl-s total:289 pass:222 dwarn:35 dfail:0 fail:0 skip:32 time:538s fi-elk-e7500 total:289 pass:230 dwarn:0 dfail:0 fail:0 skip:59 time:407s fi-glk-1 total:289 pass:259 dwarn:1 dfail:0 fail:0 skip:29 time:566s fi-hsw-4770 total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:424s fi-hsw-4770r total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:406s fi-ilk-650 total:289 pass:229 dwarn:0 dfail:0 fail:0 skip:60 time:432s fi-ivb-3520m total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:487s fi-ivb-3770 total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:459s fi-kbl-7500u total:289 pass:264 dwarn:1 dfail:0 fail:0 skip:24 time:470s fi-kbl-7560u total:289 pass:270 dwarn:0 dfail:0 fail:0 skip:19 time:576s fi-kbl-r total:118 pass:97 dwarn:0 dfail:0 fail:0 skip:20 fi-pnv-d510 total:289 pass:223 dwarn:1 dfail:0 fail:0 skip:65 time:544s fi-skl-6260u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:454s fi-skl-6700k total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:753s fi-skl-6770hq total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:490s fi-skl-gvtdvm total:289 pass:266 dwarn:0 dfail:0 fail:0 skip:23 time:482s fi-snb-2520m total:289 pass:251 dwarn:0 dfail:0 fail:0 skip:38 time:575s fi-snb-2600 total:289 pass:249 dwarn:0 dfail:0 fail:1 skip:39 time:412s
bf6ecf6d25c1c45e576643b7d7a65e8b1e6b4f01 drm-tip: 2017y-09m-19d-17h-23m-04s UTC integration manifest b954a7b1e47c drm/i915/cnl: Fix SSEU Device Status.1c6198647321 drm/i915/cnl: Add support slice/subslice/eu configs
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5757/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx