Skip to contentSkip to conversation

drm/i915: Implement ReadHitWriteOnlyDisable.

PATCH Superseded Rafael Antognolli 3 participants 7 messages Nov 1, 2017

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/i915: Implement ReadHitWriteOnlyDisable.

The workaround for this is described as:

"if RenderSurfaceState.Num_Multisamples > 1, disable RCC clock gating if RenderSurfaceState.Num_Multisamples == 1, set 0x7010[14] = 1"

So it looks like the userspace should be responsible for setting these, based on the number of multisamples dependency. However, the register that controls RCC clock gating is not a context register, and cannot be set by userspace.

Since we would end up setting one or another based on the number of multisamples anyway, it seems harmless to just set both all the time.

This change (specially the GEN10_READ_HIT_WRITEONLY_DISABLE bit) improves CNL stability by avoiding some of the hangs seen in the platform.

---
 drivers/gpu/drm/i915/i915_reg.h        | 2 ++
 drivers/gpu/drm/i915/intel_engine_cs.c | 5 +++++
 2 files changed, 7 insertions(+)
drivers/gpu/drm/i915/i915_reg.h +2 -0
index 8c775e96b4e4..d9a65cebefaa 100644
@@ -3837,6 +3837,7 @@ enum {
  */
 #define SLICE_UNIT_LEVEL_CLKGATE	_MMIO(0x94d4)
 #define  SARBUNIT_CLKGATE_DIS		(1 << 5)
+#define  RCCUNIT_CLKGATE_DIS		(1 << 7)
 
 /*
  * Display engine regs
@@ -7016,6 +7017,7 @@ enum {
 #define GEN7_COMMON_SLICE_CHICKEN1		_MMIO(0x7010)
 # define GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC	((1<<10) | (1<<26))
 # define GEN9_RHWO_OPTIMIZATION_DISABLE		(1<<14)
+# define GEN10_READ_HIT_WRITEONLY_DISABLE	(1<<14)
 #define COMMON_SLICE_CHICKEN2			_MMIO(0x7014)
 # define GEN9_PBE_COMPRESSED_HASH_SELECTION	(1<<13)
 # define GEN9_DISABLE_GATHER_AT_SET_SHADER_COMMON_SLICE (1<<12)
drivers/gpu/drm/i915/intel_engine_cs.c +5 -0
index f31f2d6384c3..0d8e25a4623a 100644
@@ -1320,6 +1320,11 @@ static int cnl_init_workarounds(struct intel_engine_cs *engine)
 	WA_SET_FIELD_MASKED(GEN8_CS_CHICKEN1, GEN9_PREEMPT_GPGPU_LEVEL_MASK,
 			    GEN9_PREEMPT_GPGPU_COMMAND_LEVEL);
 
+	/* ReadHitWriteOnlyDisable: cnl */
+	WA_SET_BIT_MASKED(GEN7_COMMON_SLICE_CHICKEN1,
+			  GEN10_READ_HIT_WRITEONLY_DISABLE);
+	WA_SET_BIT_MASKED(SLICE_UNIT_LEVEL_CLKGATE, RCCUNIT_CLKGATE_DIS);
+
 	/* WaEnablePreemptionGranularityControlByUMD:cnl */
 	I915_WRITE(GEN7_FF_SLICE_CS_CHICKEN1,
 		   _MASKED_BIT_ENABLE(GEN9_FFSC_PERCTX_PREEMPT_CTRL));
Signature · 6 lines
2.13.6

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

✓ Fi.CI.BAT: success for drm/i915: Implement ReadHitWriteOnlyDisable.

== Series Details ==

== Series Details ==

Series: drm/i915: Implement ReadHitWriteOnlyDisable.
URL : https://patchwork.freedesktop.org/series/32991/
State : success

== Summary ==

Series 32991v1 drm/i915: Implement ReadHitWriteOnlyDisable.
https://patchwork.freedesktop.org/api/1.0/series/32991/revisions/1/mbox/

fi-bdw-5557u     total:289  pass:268  dwarn:0   dfail:0   fail:0   skip:21  time:449s
fi-bdw-gvtdvm    total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:457s
fi-blb-e6850     total:289  pass:223  dwarn:1   dfail:0   fail:0   skip:65  time:380s
fi-bsw-n3050     total:289  pass:243  dwarn:0   dfail:0   fail:0   skip:46  time:531s
fi-bwr-2160      total:289  pass:183  dwarn:0   dfail:0   fail:0   skip:106 time:277s
fi-bxt-dsi       total:289  pass:259  dwarn:0   dfail:0   fail:0   skip:30  time:505s
fi-bxt-j4205     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:508s
fi-byt-j1900     total:289  pass:253  dwarn:1   dfail:0   fail:0   skip:35  time:510s
fi-byt-n2820     total:289  pass:249  dwarn:1   dfail:0   fail:0   skip:39  time:491s
fi-cfl-s         total:289  pass:253  dwarn:4   dfail:0   fail:0   skip:32  time:567s
fi-cnl-y         total:217  pass:196  dwarn:0   dfail:0   fail:0   skip:20 
fi-elk-e7500     total:289  pass:229  dwarn:0   dfail:0   fail:0   skip:60  time:431s
fi-gdg-551       total:289  pass:178  dwarn:1   dfail:0   fail:1   skip:109 time:264s
fi-glk-1         total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:590s
fi-glk-dsi       total:289  pass:258  dwarn:0   dfail:0   fail:1   skip:30  time:495s
fi-hsw-4770      total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:432s
fi-hsw-4770r     total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:429s
fi-ilk-650       total:289  pass:228  dwarn:0   dfail:0   fail:0   skip:61  time:428s
fi-ivb-3520m     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:499s
fi-ivb-3770      total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:468s
fi-kbl-7500u     total:289  pass:264  dwarn:1   dfail:0   fail:0   skip:24  time:500s
fi-kbl-7560u     total:289  pass:270  dwarn:0   dfail:0   fail:0   skip:19  time:573s
fi-kbl-7567u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:480s
fi-kbl-r         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:590s
fi-pnv-d510      total:289  pass:222  dwarn:1   dfail:0   fail:0   skip:66  time:572s
fi-skl-6260u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:459s
fi-skl-6600u     total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:600s
fi-skl-6700hq    total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:650s
fi-skl-6700k     total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:520s
fi-skl-6770hq    total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:499s
fi-skl-gvtdvm    total:289  pass:266  dwarn:0   dfail:0   fail:0   skip:23  time:457s
fi-snb-2520m     total:289  pass:250  dwarn:0   dfail:0   fail:0   skip:39  time:572s
fi-snb-2600      total:289  pass:249  dwarn:0   dfail:0   fail:0   skip:40  time:418s

7da46c0a019ebaec3f67a8a6ccc60a56c2d521b1 drm-tip: 2017y-11m-01d-17h-32m-50s UTC integration manifest e0e862794bb5 drm/i915: Implement ReadHitWriteOnlyDisable.

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6300/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#2 lore raw

✗ Fi.CI.IGT: failure for drm/i915: Implement ReadHitWriteOnlyDisable.

In reply to Rafael Antognolli
== Series Details ==

== Series Details ==

Series: drm/i915: Implement ReadHitWriteOnlyDisable.
URL : https://patchwork.freedesktop.org/series/32991/
State : failure

== Summary ==

Test kms_flip:

        Subgroup plain-flip-fb-recreate-interruptible:
                pass       -> FAIL       (shard-hsw) fdo#100368
        Subgroup modeset-vs-vblank-race-interruptible:
                fail       -> PASS       (shard-hsw) fdo#103060
Test kms_setmode:
        Subgroup basic:
                fail       -> PASS       (shard-hsw) fdo#99912
Test perf:
        Subgroup oa-exponents:
                fail       -> PASS       (shard-hsw) fdo#102254
Test drv_module_reload:
        Subgroup basic-reload:
                pass       -> DMESG-WARN (shard-hsw) fdo#102707
Test kms_frontbuffer_tracking:
        Subgroup fbc-1p-pri-indfb-multidraw:
                pass       -> FAIL       (shard-hsw)

fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
fdo#102254 https://bugs.freedesktop.org/show_bug.cgi?id=102254
fdo#102707 https://bugs.freedesktop.org/show_bug.cgi?id=102707

shard-hsw total:2539 pass:1430 dwarn:2 dfail:0 fail:10 skip:1097 time:9227s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6300/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#3 lore raw

Re: ✗ Fi.CI.IGT: failure for drm/i915: Implement ReadHitWriteOnlyDisable.

Quoted 9 lines · Patchwork

== Series Details ==

Series: drm/i915: Implement ReadHitWriteOnlyDisable.
URL : https://patchwork.freedesktop.org/series/32991/
State : failure

== Summary ==

Test kms_flip:

Quoted 16 lines
        Subgroup plain-flip-fb-recreate-interruptible:
                pass       -> FAIL       (shard-hsw) fdo#100368
        Subgroup modeset-vs-vblank-race-interruptible:
                fail       -> PASS       (shard-hsw) fdo#103060
Test kms_setmode:
        Subgroup basic:
                fail       -> PASS       (shard-hsw) fdo#99912
Test perf:
        Subgroup oa-exponents:
                fail       -> PASS       (shard-hsw) fdo#102254
Test drv_module_reload:
        Subgroup basic-reload:
                pass       -> DMESG-WARN (shard-hsw) fdo#102707
Test kms_frontbuffer_tracking:
        Subgroup fbc-1p-pri-indfb-multidraw:
                pass       -> FAIL       (shard-hsw)

A false positive here. I triggered the patch retest. Altough we don't cnl on full igt run anyways...

Quoted 9 lines

fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
fdo#102254 https://bugs.freedesktop.org/show_bug.cgi?id=102254
fdo#102707 https://bugs.freedesktop.org/show_bug.cgi?id=102707

shard-hsw total:2539 pass:1430 dwarn:2 dfail:0 fail:10 skip:1097 time:9227s

Quoted 7 lines

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6300/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#4 lore raw
In reply to Rafael Antognolli
Quoted 10 lines · Rafael Antognolli

The workaround for this is described as:

"if RenderSurfaceState.Num_Multisamples > 1, disable RCC clock gating if RenderSurfaceState.Num_Multisamples == 1, set 0x7010[14] = 1"

So it looks like the userspace should be responsible for setting these, based on the number of multisamples dependency. However, the register that controls RCC clock gating is not a context register, and cannot be set by userspace.

Quoted 4 lines

Since we would end up setting one or another based on the number of multisamples anyway, it seems harmless to just set both all the time.

This change (specially the GEN10_READ_HIT_WRITEONLY_DISABLE bit)

I wonder if we shouldn't stay only with this bit. For me it looks like one or another.

Quoted 2 lines

improves CNL stability by avoiding some of the hangs seen in the platform.

But this is what matters. If this is the safest option for us let's do it.

Quoted 20 lines
---
 drivers/gpu/drm/i915/i915_reg.h        | 2 ++
 drivers/gpu/drm/i915/intel_engine_cs.c | 5 +++++
 2 files changed, 7 insertions(+)
drivers/gpu/drm/i915/i915_reg.h +1 -0
index 8c775e96b4e4..d9a65cebefaa 100644
@@ -3837,6 +3837,7 @@ enum {
  */
 #define SLICE_UNIT_LEVEL_CLKGATE	_MMIO(0x94d4)
 #define  SARBUNIT_CLKGATE_DIS		(1 << 5)
+#define  RCCUNIT_CLKGATE_DIS		(1 << 7)
 
 /*
  * Display engine regs

drivers/gpu/drm/i915/i915_reg.h enum { · line 7020

Quoted 4 lines
drivers/gpu/drm/i915/i915_reg.h +1 -0
@@ -7016,6 +7017,7 @@ enum {
 #define GEN7_COMMON_SLICE_CHICKEN1		_MMIO(0x7010)
 # define GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC	((1<<10) | (1<<26))
 # define GEN9_RHWO_OPTIMIZATION_DISABLE		(1<<14)
+# define GEN10_READ_HIT_WRITEONLY_DISABLE	(1<<14)

I don't believe you need to redefine this.
It is same as GEN9_RHWO_OPTIMIZATION_DISABLE.

RCC Read Hit Write Only Optimization Disabled, SKL+ o spec.

drivers/gpu/drm/i915/intel_engine_cs.c static int cnl_init_workarounds(struct intel_engine_cs *engine) · line 1323

Quoted 12 lines
drivers/gpu/drm/i915/i915_reg.h +0 -0
 #define COMMON_SLICE_CHICKEN2			_MMIO(0x7014)
 # define GEN9_PBE_COMPRESSED_HASH_SELECTION	(1<<13)
 # define GEN9_DISABLE_GATHER_AT_SET_SHADER_COMMON_SLICE (1<<12)
drivers/gpu/drm/i915/intel_engine_cs.c +1 -0
index f31f2d6384c3..0d8e25a4623a 100644
@@ -1320,6 +1320,11 @@ static int cnl_init_workarounds(struct intel_engine_cs *engine)
 	WA_SET_FIELD_MASKED(GEN8_CS_CHICKEN1, GEN9_PREEMPT_GPGPU_LEVEL_MASK,
 			    GEN9_PREEMPT_GPGPU_COMMAND_LEVEL);
 
+	/* ReadHitWriteOnlyDisable: cnl */

I was going to complain about the name but I saw on bspec it is really ReadHitWriteOnlyDisable while on wa_database it is WaReadHitWriteOnlyDisable

I would tend to prefer the second one, but with the first one the search on Bspec works and search on wa_database also works... while second one it would be found on BSpec. So let it be: ReadHitWriteOnlyDisable

Thanks,
Rodrigo.

Quoted 7 lines
drivers/gpu/drm/i915/intel_engine_cs.c +4 -0
+	WA_SET_BIT_MASKED(GEN7_COMMON_SLICE_CHICKEN1,
+			  GEN10_READ_HIT_WRITEONLY_DISABLE);
+	WA_SET_BIT_MASKED(SLICE_UNIT_LEVEL_CLKGATE, RCCUNIT_CLKGATE_DIS);
+
 
 	/* WaEnablePreemptionGranularityControlByUMD:cnl */
 	I915_WRITE(GEN7_FF_SLICE_CS_CHICKEN1,
Quoted 8 lines

_MASKED_BIT_ENABLE(GEN9_FFSC_PERCTX_PREEMPT_CTRL));

Signature · 6 lines
2.13.6

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#5 lore raw
Quoted 11 lines · Rodrigo Vivi
Quoted 10 lines · Rafael Antognolli

The workaround for this is described as:

"if RenderSurfaceState.Num_Multisamples > 1, disable RCC clock gating if RenderSurfaceState.Num_Multisamples == 1, set 0x7010[14] = 1"

So it looks like the userspace should be responsible for setting these, based on the number of multisamples dependency. However, the register that controls RCC clock gating is not a context register, and cannot be set by userspace.

Quoted 7 lines
Quoted 4 lines

Since we would end up setting one or another based on the number of multisamples anyway, it seems harmless to just set both all the time.

This change (specially the GEN10_READ_HIT_WRITEONLY_DISABLE bit)

I wonder if we shouldn't stay only with this bit. For me it looks like one or another.

I would say we need at least the GEN10_READ_HIT_WRITEONLY_DISABLE bit, and then we can decide if we are adding the other one or not. Within the same program (I think sometimes even within a single draw call), it's possible that we have some surfaces that are multisampled while others are not, so in that case we would probably have to set both anyway.

However, I don't have a test case that proves that the workaround for the multisampled case is required...

Quoted 34 lines
Quoted 2 lines

improves CNL stability by avoiding some of the hangs seen in the platform.

But this is what matters. If this is the safest option for us let's do it.

Quoted 20 lines
---
 drivers/gpu/drm/i915/i915_reg.h        | 2 ++
 drivers/gpu/drm/i915/intel_engine_cs.c | 5 +++++
 2 files changed, 7 insertions(+)
drivers/gpu/drm/i915/i915_reg.h +1 -0
index 8c775e96b4e4..d9a65cebefaa 100644
@@ -3837,6 +3837,7 @@ enum {
  */
 #define SLICE_UNIT_LEVEL_CLKGATE	_MMIO(0x94d4)
 #define  SARBUNIT_CLKGATE_DIS		(1 << 5)
+#define  RCCUNIT_CLKGATE_DIS		(1 << 7)
 
 /*
  * Display engine regs

drivers/gpu/drm/i915/i915_reg.h enum { · line 7020

Quoted 4 lines
drivers/gpu/drm/i915/i915_reg.h +1 -0
@@ -7016,6 +7017,7 @@ enum {
 #define GEN7_COMMON_SLICE_CHICKEN1		_MMIO(0x7010)
 # define GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC	((1<<10) | (1<<26))
 # define GEN9_RHWO_OPTIMIZATION_DISABLE		(1<<14)
+# define GEN10_READ_HIT_WRITEONLY_DISABLE	(1<<14)

I don't believe you need to redefine this.
It is same as GEN9_RHWO_OPTIMIZATION_DISABLE.

Quoted 1 line

RCC Read Hit Write Only Optimization Disabled, SKL+ o spec.

Oh, I haven't noticed that! Will fix it in the next version...

Quoted 16 lines

drivers/gpu/drm/i915/intel_engine_cs.c static int cnl_init_workarounds(struct intel_engine_cs *engine) · line 1323

Quoted 12 lines
drivers/gpu/drm/i915/i915_reg.h +0 -0
 #define COMMON_SLICE_CHICKEN2			_MMIO(0x7014)
 # define GEN9_PBE_COMPRESSED_HASH_SELECTION	(1<<13)
 # define GEN9_DISABLE_GATHER_AT_SET_SHADER_COMMON_SLICE (1<<12)
drivers/gpu/drm/i915/intel_engine_cs.c +1 -0
index f31f2d6384c3..0d8e25a4623a 100644
@@ -1320,6 +1320,11 @@ static int cnl_init_workarounds(struct intel_engine_cs *engine)
 	WA_SET_FIELD_MASKED(GEN8_CS_CHICKEN1, GEN9_PREEMPT_GPGPU_LEVEL_MASK,
 			    GEN9_PREEMPT_GPGPU_COMMAND_LEVEL);
 
+	/* ReadHitWriteOnlyDisable: cnl */

I was going to complain about the name but I saw on bspec it is really ReadHitWriteOnlyDisable while on wa_database it is WaReadHitWriteOnlyDisable

Quoted 22 lines

I would tend to prefer the second one, but with the first one the search on Bspec works and search on wa_database also works... while second one it would be found on BSpec. So let it be: ReadHitWriteOnlyDisable

Thanks,
Rodrigo.

Quoted 15 lines
drivers/gpu/drm/i915/intel_engine_cs.c +4 -0
+	WA_SET_BIT_MASKED(GEN7_COMMON_SLICE_CHICKEN1,
+			  GEN10_READ_HIT_WRITEONLY_DISABLE);
+	WA_SET_BIT_MASKED(SLICE_UNIT_LEVEL_CLKGATE, RCCUNIT_CLKGATE_DIS);
+
 
 	/* WaEnablePreemptionGranularityControlByUMD:cnl */
 	I915_WRITE(GEN7_FF_SLICE_CS_CHICKEN1,

_MASKED_BIT_ENABLE(GEN9_FFSC_PERCTX_PREEMPT_CTRL));

Signature · 6 lines
2.13.6

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#6 lore raw

✓ Fi.CI.BAT: success for drm/i915: Implement ReadHitWriteOnlyDisable.

In reply to Rafael Antognolli
== Series Details ==

== Series Details ==

Series: drm/i915: Implement ReadHitWriteOnlyDisable.
URL : https://patchwork.freedesktop.org/series/32991/
State : success

== Summary ==

Series 32991v1 drm/i915: Implement ReadHitWriteOnlyDisable.
https://patchwork.freedesktop.org/api/1.0/series/32991/revisions/1/mbox/

fi-bdw-5557u     total:289  pass:268  dwarn:0   dfail:0   fail:0   skip:21  time:447s
fi-bdw-gvtdvm    total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:456s
fi-blb-e6850     total:289  pass:223  dwarn:1   dfail:0   fail:0   skip:65  time:382s
fi-bsw-n3050     total:289  pass:243  dwarn:0   dfail:0   fail:0   skip:46  time:543s
fi-bwr-2160      total:289  pass:183  dwarn:0   dfail:0   fail:0   skip:106 time:276s
fi-bxt-dsi       total:289  pass:259  dwarn:0   dfail:0   fail:0   skip:30  time:508s
fi-bxt-j4205     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:503s
fi-byt-j1900     total:289  pass:253  dwarn:1   dfail:0   fail:0   skip:35  time:508s
fi-byt-n2820     total:289  pass:249  dwarn:1   dfail:0   fail:0   skip:39  time:490s
fi-cfl-s         total:289  pass:253  dwarn:4   dfail:0   fail:0   skip:32  time:557s
fi-cnl-y         total:217  pass:196  dwarn:0   dfail:0   fail:0   skip:20 
fi-elk-e7500     total:289  pass:229  dwarn:0   dfail:0   fail:0   skip:60  time:442s
fi-gdg-551       total:289  pass:178  dwarn:1   dfail:0   fail:1   skip:109 time:263s
fi-glk-1         total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:585s
fi-glk-dsi       total:289  pass:258  dwarn:0   dfail:0   fail:1   skip:30  time:492s
fi-hsw-4770      total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:430s
fi-hsw-4770r     total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:430s
fi-ilk-650       total:289  pass:228  dwarn:0   dfail:0   fail:0   skip:61  time:425s
fi-ivb-3520m     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:500s
fi-ivb-3770      total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:470s
fi-kbl-7500u     total:289  pass:264  dwarn:1   dfail:0   fail:0   skip:24  time:496s
fi-kbl-7560u     total:289  pass:270  dwarn:0   dfail:0   fail:0   skip:19  time:575s
fi-kbl-7567u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:486s
fi-kbl-r         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:586s
fi-pnv-d510      total:289  pass:222  dwarn:1   dfail:0   fail:0   skip:66  time:567s
fi-skl-6260u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:459s
fi-skl-6600u     total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:600s
fi-skl-6700hq    total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:649s
fi-skl-6700k     total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:520s
fi-skl-6770hq    total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:502s
fi-skl-gvtdvm    total:289  pass:266  dwarn:0   dfail:0   fail:0   skip:23  time:458s
fi-snb-2520m     total:289  pass:250  dwarn:0   dfail:0   fail:0   skip:39  time:571s
fi-snb-2600      total:289  pass:249  dwarn:0   dfail:0   fail:0   skip:40  time:423s

7da46c0a019ebaec3f67a8a6ccc60a56c2d521b1 drm-tip: 2017y-11m-01d-17h-32m-50s UTC integration manifest b474a1ebd14f drm/i915: Implement ReadHitWriteOnlyDisable.

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6306/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx