drm/i915: Implement ReadHitWriteOnlyDisable.
Subsystems (2)
PATCH 1/1 drm/i915: Implement ReadHitWriteOnlyDisable.
The workaround for this is described as:
"if RenderSurfaceState.Num_Multisamples > 1, disable RCC clock gating if RenderSurfaceState.Num_Multisamples == 1, set 0x7010[14] = 1"
So it looks like the userspace should be responsible for setting these, based on the number of multisamples dependency. However, the register that controls RCC clock gating is not a context register, and cannot be set by userspace.
Since we would end up setting one or another based on the number of multisamples anyway, it seems harmless to just set both all the time.
This change (specially the GEN10_READ_HIT_WRITEONLY_DISABLE bit) improves CNL stability by avoiding some of the hangs seen in the platform.
--- drivers/gpu/drm/i915/i915_reg.h | 2 ++ drivers/gpu/drm/i915/intel_engine_cs.c | 5 +++++ 2 files changed, 7 insertions(+)
drivers/gpu/drm/i915/i915_reg.h +2 -0
@@ -3837,6 +3837,7 @@ enum {*/ #define SLICE_UNIT_LEVEL_CLKGATE _MMIO(0x94d4)#define SARBUNIT_CLKGATE_DIS (1 << 5) +#define RCCUNIT_CLKGATE_DIS (1 << 7)/* * Display engine regs
@@ -7016,6 +7017,7 @@ enum {#define GEN7_COMMON_SLICE_CHICKEN1 _MMIO(0x7010)# define GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC ((1<<10) | (1<<26))# define GEN9_RHWO_OPTIMIZATION_DISABLE (1<<14) +# define GEN10_READ_HIT_WRITEONLY_DISABLE (1<<14)#define COMMON_SLICE_CHICKEN2 _MMIO(0x7014)# define GEN9_PBE_COMPRESSED_HASH_SELECTION (1<<13)# define GEN9_DISABLE_GATHER_AT_SET_SHADER_COMMON_SLICE (1<<12)
drivers/gpu/drm/i915/intel_engine_cs.c +5 -0
@@ -1320,6 +1320,11 @@ static int cnl_init_workarounds(struct intel_engine_cs *engine)WA_SET_FIELD_MASKED (GEN8_CS_CHICKEN1 ,GEN9_PREEMPT_GPGPU_LEVEL_MASK ,GEN9_PREEMPT_GPGPU_COMMAND_LEVEL ); +/* ReadHitWriteOnlyDisable: cnl */ +WA_SET_BIT_MASKED (GEN7_COMMON_SLICE_CHICKEN1 , +GEN10_READ_HIT_WRITEONLY_DISABLE ); +WA_SET_BIT_MASKED (SLICE_UNIT_LEVEL_CLKGATE ,RCCUNIT_CLKGATE_DIS ); +/* WaEnablePreemptionGranularityControlByUMD:cnl */ I915_WRITE (GEN7_FF_SLICE_CS_CHICKEN1 ,_MASKED_BIT_ENABLE (GEN9_FFSC_PERCTX_PREEMPT_CTRL ));
Signature · 6 lines
2.13.6 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915: Implement ReadHitWriteOnlyDisable.
== Series Details ==
== Series Details ==
Series: drm/i915: Implement ReadHitWriteOnlyDisable.
URL : https://patchwork.freedesktop.org/series/32991/
State : success
== Summary ==
Series 32991v1 drm/i915: Implement ReadHitWriteOnlyDisable.
https://patchwork.freedesktop.org/api/1.0/series/32991/revisions/1/mbox/
fi-bdw-5557u total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:449s fi-bdw-gvtdvm total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:457s fi-blb-e6850 total:289 pass:223 dwarn:1 dfail:0 fail:0 skip:65 time:380s fi-bsw-n3050 total:289 pass:243 dwarn:0 dfail:0 fail:0 skip:46 time:531s fi-bwr-2160 total:289 pass:183 dwarn:0 dfail:0 fail:0 skip:106 time:277s fi-bxt-dsi total:289 pass:259 dwarn:0 dfail:0 fail:0 skip:30 time:505s fi-bxt-j4205 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:508s fi-byt-j1900 total:289 pass:253 dwarn:1 dfail:0 fail:0 skip:35 time:510s fi-byt-n2820 total:289 pass:249 dwarn:1 dfail:0 fail:0 skip:39 time:491s fi-cfl-s total:289 pass:253 dwarn:4 dfail:0 fail:0 skip:32 time:567s fi-cnl-y total:217 pass:196 dwarn:0 dfail:0 fail:0 skip:20 fi-elk-e7500 total:289 pass:229 dwarn:0 dfail:0 fail:0 skip:60 time:431s fi-gdg-551 total:289 pass:178 dwarn:1 dfail:0 fail:1 skip:109 time:264s fi-glk-1 total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:590s fi-glk-dsi total:289 pass:258 dwarn:0 dfail:0 fail:1 skip:30 time:495s fi-hsw-4770 total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:432s fi-hsw-4770r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:429s fi-ilk-650 total:289 pass:228 dwarn:0 dfail:0 fail:0 skip:61 time:428s fi-ivb-3520m total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:499s fi-ivb-3770 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:468s fi-kbl-7500u total:289 pass:264 dwarn:1 dfail:0 fail:0 skip:24 time:500s fi-kbl-7560u total:289 pass:270 dwarn:0 dfail:0 fail:0 skip:19 time:573s fi-kbl-7567u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:480s fi-kbl-r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:590s fi-pnv-d510 total:289 pass:222 dwarn:1 dfail:0 fail:0 skip:66 time:572s fi-skl-6260u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:459s fi-skl-6600u total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:600s fi-skl-6700hq total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:650s fi-skl-6700k total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:520s fi-skl-6770hq total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:499s fi-skl-gvtdvm total:289 pass:266 dwarn:0 dfail:0 fail:0 skip:23 time:457s fi-snb-2520m total:289 pass:250 dwarn:0 dfail:0 fail:0 skip:39 time:572s fi-snb-2600 total:289 pass:249 dwarn:0 dfail:0 fail:0 skip:40 time:418s
7da46c0a019ebaec3f67a8a6ccc60a56c2d521b1 drm-tip: 2017y-11m-01d-17h-32m-50s UTC integration manifest e0e862794bb5 drm/i915: Implement ReadHitWriteOnlyDisable.
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6300/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.IGT: failure for drm/i915: Implement ReadHitWriteOnlyDisable.
In reply to Rafael Antognolli== Series Details ==
== Series Details ==
Series: drm/i915: Implement ReadHitWriteOnlyDisable.
URL : https://patchwork.freedesktop.org/series/32991/
State : failure
== Summary ==
Test kms_flip:
Subgroup plain-flip-fb-recreate-interruptible:
pass -> FAIL (shard-hsw) fdo#100368
Subgroup modeset-vs-vblank-race-interruptible:
fail -> PASS (shard-hsw) fdo#103060
Test kms_setmode:
Subgroup basic:
fail -> PASS (shard-hsw) fdo#99912
Test perf:
Subgroup oa-exponents:
fail -> PASS (shard-hsw) fdo#102254
Test drv_module_reload:
Subgroup basic-reload:
pass -> DMESG-WARN (shard-hsw) fdo#102707
Test kms_frontbuffer_tracking:
Subgroup fbc-1p-pri-indfb-multidraw:
pass -> FAIL (shard-hsw)fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
fdo#102254 https://bugs.freedesktop.org/show_bug.cgi?id=102254
fdo#102707 https://bugs.freedesktop.org/show_bug.cgi?id=102707
shard-hsw total:2539 pass:1430 dwarn:2 dfail:0 fail:10 skip:1097 time:9227s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6300/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerRe: ✗ Fi.CI.IGT: failure for drm/i915: Implement ReadHitWriteOnlyDisable.
Quoted 9 lines · Patchwork
== Series Details ==
Series: drm/i915: Implement ReadHitWriteOnlyDisable.
URL : https://patchwork.freedesktop.org/series/32991/
State : failure== Summary ==
Test
kms_flip:
Quoted 16 lines
Subgroup plain-flip-fb-recreate-interruptible:
pass -> FAIL (shard-hsw) fdo#100368
Subgroup modeset-vs-vblank-race-interruptible:
fail -> PASS (shard-hsw) fdo#103060
Test kms_setmode:
Subgroup basic:
fail -> PASS (shard-hsw) fdo#99912
Test perf:
Subgroup oa-exponents:
fail -> PASS (shard-hsw) fdo#102254
Test drv_module_reload:
Subgroup basic-reload:
pass -> DMESG-WARN (shard-hsw) fdo#102707
Test kms_frontbuffer_tracking:
Subgroup fbc-1p-pri-indfb-multidraw:
pass -> FAIL (shard-hsw)A false positive here. I triggered the patch retest. Altough we don't cnl on full igt run anyways...
Quoted 9 lines
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
fdo#102254 https://bugs.freedesktop.org/show_bug.cgi?id=102254
fdo#102707 https://bugs.freedesktop.org/show_bug.cgi?id=102707shard-hsw total:2539 pass:1430 dwarn:2 dfail:0 fail:10 skip:1097 time:9227s
Quoted 7 lines
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6300/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerQuoted 10 lines · Rafael Antognolli
The workaround for this is described as:
"if RenderSurfaceState.Num_Multisamples > 1, disable RCC clock gating if RenderSurfaceState.Num_Multisamples == 1, set 0x7010[14] = 1"
So it looks like the userspace should be responsible for setting these, based on the number of multisamples dependency. However, the register that controls RCC clock gating is not a context register, and cannot be set by userspace.
Quoted 4 lines
Since we would end up setting one or another based on the number of multisamples anyway, it seems harmless to just set both all the time.
This change (specially the
GEN10_READ_HIT_WRITEONLY_DISABLEbit)
I wonder if we shouldn't stay only with this bit. For me it looks like one or another.
Quoted 2 lines
improves CNL stability by avoiding some of the hangs seen in the platform.
But this is what matters. If this is the safest option for us let's do it.
Quoted 20 lines
Signed-off-by Rafael Antognolli <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 2 ++ drivers/gpu/drm/i915/intel_engine_cs.c | 5 +++++ 2 files changed, 7 insertions(+)drivers/gpu/drm/i915/i915_reg.h +1
-0@@ -3837,6 +3837,7 @@ enum {*/ #define SLICE_UNIT_LEVEL_CLKGATE _MMIO(0x94d4)#define SARBUNIT_CLKGATE_DIS (1 << 5) +#define RCCUNIT_CLKGATE_DIS (1 << 7)/* * Display engine regs
drivers/gpu/drm/i915/i915_reg.h enum { · line 7020
Quoted 4 lines
drivers/gpu/drm/i915/i915_reg.h +1
-0@@ -7016,6 +7017,7 @@ enum {#define GEN7_COMMON_SLICE_CHICKEN1 _MMIO(0x7010)# define GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC ((1<<10) | (1<<26))# define GEN9_RHWO_OPTIMIZATION_DISABLE (1<<14) +# define GEN10_READ_HIT_WRITEONLY_DISABLE (1<<14)
I don't believe you need to redefine this.
It is same as GEN9_RHWO_OPTIMIZATION_DISABLE.
RCC Read Hit Write Only Optimization Disabled, SKL+ o spec.
drivers/gpu/drm/i915/intel_engine_cs.c static int cnl_init_workarounds(struct intel_engine_cs *engine) · line 1323
Quoted 12 lines
drivers/gpu/drm/i915/i915_reg.h +0
-0#define COMMON_SLICE_CHICKEN2 _MMIO(0x7014)# define GEN9_PBE_COMPRESSED_HASH_SELECTION (1<<13)# define GEN9_DISABLE_GATHER_AT_SET_SHADER_COMMON_SLICE (1<<12)drivers/gpu/drm/i915/intel_engine_cs.c +1
-0@@ -1320,6 +1320,11 @@ static int cnl_init_workarounds(struct intel_engine_cs *engine)WA_SET_FIELD_MASKED (GEN8_CS_CHICKEN1 ,GEN9_PREEMPT_GPGPU_LEVEL_MASK ,GEN9_PREEMPT_GPGPU_COMMAND_LEVEL ); +/* ReadHitWriteOnlyDisable: cnl */
I was going to complain about the name but I saw on bspec it is really ReadHitWriteOnlyDisable while on wa_database it is WaReadHitWriteOnlyDisable
I would tend to prefer the second one, but with the first one the search on Bspec works and search on wa_database also works... while second one it would be found on BSpec. So let it be: ReadHitWriteOnlyDisable
Thanks,
Rodrigo.
Quoted 7 lines
drivers/gpu/drm/i915/intel_engine_cs.c +4
-0+WA_SET_BIT_MASKED (GEN7_COMMON_SLICE_CHICKEN1 , +GEN10_READ_HIT_WRITEONLY_DISABLE ); +WA_SET_BIT_MASKED (SLICE_UNIT_LEVEL_CLKGATE ,RCCUNIT_CLKGATE_DIS ); +/* WaEnablePreemptionGranularityControlByUMD:cnl */ I915_WRITE(GEN7_FF_SLICE_CS_CHICKEN1,
Quoted 8 lines
_MASKED_BIT_ENABLE(GEN9_FFSC_PERCTX_PREEMPT_CTRL));Signature · 6 lines
2.13.6 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 11 lines · Rodrigo Vivi
Quoted 10 lines · Rafael Antognolli
The workaround for this is described as:
"if RenderSurfaceState.Num_Multisamples > 1, disable RCC clock gating if RenderSurfaceState.Num_Multisamples == 1, set 0x7010[14] = 1"
So it looks like the userspace should be responsible for setting these, based on the number of multisamples dependency. However, the register that controls RCC clock gating is not a context register, and cannot be set by userspace.
Quoted 7 lines
Quoted 4 lines
Since we would end up setting one or another based on the number of multisamples anyway, it seems harmless to just set both all the time.
This change (specially the
GEN10_READ_HIT_WRITEONLY_DISABLEbit)I wonder if we shouldn't stay only with this bit. For me it looks like one or another.
I would say we need at least the GEN10_READ_HIT_WRITEONLY_DISABLE bit, and then we can decide if we are adding the other one or not. Within the same program (I think sometimes even within a single draw call), it's possible that we have some surfaces that are multisampled while others are not, so in that case we would probably have to set both anyway.
However, I don't have a test case that proves that the workaround for the multisampled case is required...
Quoted 34 lines
Quoted 2 lines
improves CNL stability by avoiding some of the hangs seen in the platform.
But this is what matters. If this is the safest option for us let's do it.
Quoted 20 lines
Signed-off-by Rafael Antognolli <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 2 ++ drivers/gpu/drm/i915/intel_engine_cs.c | 5 +++++ 2 files changed, 7 insertions(+)drivers/gpu/drm/i915/i915_reg.h +1
-0@@ -3837,6 +3837,7 @@ enum {*/ #define SLICE_UNIT_LEVEL_CLKGATE _MMIO(0x94d4)#define SARBUNIT_CLKGATE_DIS (1 << 5) +#define RCCUNIT_CLKGATE_DIS (1 << 7)/* * Display engine regs drivers/gpu/drm/i915/i915_reg.h enum { · line 7020
Quoted 4 lines
drivers/gpu/drm/i915/i915_reg.h +1
-0@@ -7016,6 +7017,7 @@ enum {#define GEN7_COMMON_SLICE_CHICKEN1 _MMIO(0x7010)# define GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC ((1<<10) | (1<<26))# define GEN9_RHWO_OPTIMIZATION_DISABLE (1<<14) +# define GEN10_READ_HIT_WRITEONLY_DISABLE (1<<14)I don't believe you need to redefine this.
It is same asGEN9_RHWO_OPTIMIZATION_DISABLE.
Quoted 1 line
RCC Read Hit Write Only Optimization Disabled, SKL+ o spec.
Oh, I haven't noticed that! Will fix it in the next version...
Quoted 16 lines
drivers/gpu/drm/i915/intel_engine_cs.c static int cnl_init_workarounds(struct intel_engine_cs *engine) · line 1323
Quoted 12 lines
drivers/gpu/drm/i915/i915_reg.h +0
-0#define COMMON_SLICE_CHICKEN2 _MMIO(0x7014)# define GEN9_PBE_COMPRESSED_HASH_SELECTION (1<<13)# define GEN9_DISABLE_GATHER_AT_SET_SHADER_COMMON_SLICE (1<<12)drivers/gpu/drm/i915/intel_engine_cs.c +1
-0@@ -1320,6 +1320,11 @@ static int cnl_init_workarounds(struct intel_engine_cs *engine)WA_SET_FIELD_MASKED (GEN8_CS_CHICKEN1 ,GEN9_PREEMPT_GPGPU_LEVEL_MASK ,GEN9_PREEMPT_GPGPU_COMMAND_LEVEL ); +/* ReadHitWriteOnlyDisable: cnl */ I was going to complain about the name but I saw on bspec it is really ReadHitWriteOnlyDisable while on
wa_databaseit is WaReadHitWriteOnlyDisable
Quoted 22 lines
I would tend to prefer the second one, but with the first one the search on Bspec works and search on
wa_databasealso works... while second one it would be found on BSpec. So let it be: ReadHitWriteOnlyDisableThanks,
Rodrigo.Quoted 15 lines
drivers/gpu/drm/i915/intel_engine_cs.c +4
-0+WA_SET_BIT_MASKED (GEN7_COMMON_SLICE_CHICKEN1 , +GEN10_READ_HIT_WRITEONLY_DISABLE ); +WA_SET_BIT_MASKED (SLICE_UNIT_LEVEL_CLKGATE ,RCCUNIT_CLKGATE_DIS ); +/* WaEnablePreemptionGranularityControlByUMD:cnl */ I915_WRITE(GEN7_FF_SLICE_CS_CHICKEN1,
_MASKED_BIT_ENABLE(GEN9_FFSC_PERCTX_PREEMPT_CTRL));Signature · 6 lines
2.13.6 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915: Implement ReadHitWriteOnlyDisable.
In reply to Rafael Antognolli== Series Details ==
== Series Details ==
Series: drm/i915: Implement ReadHitWriteOnlyDisable.
URL : https://patchwork.freedesktop.org/series/32991/
State : success
== Summary ==
Series 32991v1 drm/i915: Implement ReadHitWriteOnlyDisable.
https://patchwork.freedesktop.org/api/1.0/series/32991/revisions/1/mbox/
fi-bdw-5557u total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:447s fi-bdw-gvtdvm total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:456s fi-blb-e6850 total:289 pass:223 dwarn:1 dfail:0 fail:0 skip:65 time:382s fi-bsw-n3050 total:289 pass:243 dwarn:0 dfail:0 fail:0 skip:46 time:543s fi-bwr-2160 total:289 pass:183 dwarn:0 dfail:0 fail:0 skip:106 time:276s fi-bxt-dsi total:289 pass:259 dwarn:0 dfail:0 fail:0 skip:30 time:508s fi-bxt-j4205 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:503s fi-byt-j1900 total:289 pass:253 dwarn:1 dfail:0 fail:0 skip:35 time:508s fi-byt-n2820 total:289 pass:249 dwarn:1 dfail:0 fail:0 skip:39 time:490s fi-cfl-s total:289 pass:253 dwarn:4 dfail:0 fail:0 skip:32 time:557s fi-cnl-y total:217 pass:196 dwarn:0 dfail:0 fail:0 skip:20 fi-elk-e7500 total:289 pass:229 dwarn:0 dfail:0 fail:0 skip:60 time:442s fi-gdg-551 total:289 pass:178 dwarn:1 dfail:0 fail:1 skip:109 time:263s fi-glk-1 total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:585s fi-glk-dsi total:289 pass:258 dwarn:0 dfail:0 fail:1 skip:30 time:492s fi-hsw-4770 total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:430s fi-hsw-4770r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:430s fi-ilk-650 total:289 pass:228 dwarn:0 dfail:0 fail:0 skip:61 time:425s fi-ivb-3520m total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:500s fi-ivb-3770 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:470s fi-kbl-7500u total:289 pass:264 dwarn:1 dfail:0 fail:0 skip:24 time:496s fi-kbl-7560u total:289 pass:270 dwarn:0 dfail:0 fail:0 skip:19 time:575s fi-kbl-7567u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:486s fi-kbl-r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:586s fi-pnv-d510 total:289 pass:222 dwarn:1 dfail:0 fail:0 skip:66 time:567s fi-skl-6260u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:459s fi-skl-6600u total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:600s fi-skl-6700hq total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:649s fi-skl-6700k total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:520s fi-skl-6770hq total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:502s fi-skl-gvtdvm total:289 pass:266 dwarn:0 dfail:0 fail:0 skip:23 time:458s fi-snb-2520m total:289 pass:250 dwarn:0 dfail:0 fail:0 skip:39 time:571s fi-snb-2600 total:289 pass:249 dwarn:0 dfail:0 fail:0 skip:40 time:423s
7da46c0a019ebaec3f67a8a6ccc60a56c2d521b1 drm-tip: 2017y-11m-01d-17h-32m-50s UTC integration manifest b474a1ebd14f drm/i915: Implement ReadHitWriteOnlyDisable.
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6306/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx