arm/dts/trats2: add bcm4334 device node
Subsystems (2)
PATCH v2 1/1 arm/dts/trats2: add bcm4334 device node
This patch allows the bcm4334 to power on and enables wifi functionality on trats2.
Signed-off-by Simon Shields <[email protected]>
--- arch/arm/boot/dts/exynos4412-trats2.dts | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
arch/arm/boot/dts/exynos4412-trats2.dts +28 -0
@@ -240,6 +240,13 @@ }; + wlan_pwrseq: sdhci3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>; + clocks = <&max77686 MAX77686_CLK_PMIC>; + clock-names = "ext_clock"; + }; + sound { compatible = "samsung,trats2-audio"; samsung,i2s-controller = <&i2s0>;
@@ -1238,6 +1245,27 @@ status = "okay"; }; +&sdhci_3 { + #address-cells = <1>; + #size-cells = <0>; + non-removable; + bus-width = <4>; + + mmc-pwrseq = <&wlan_pwrseq>; + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; + vmmc-supply = <&ldo21_reg>; + status = "okay"; + + brcmf: brcmf at 1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpx2>; + interrupts = <5 0>; + interrupt-names = "host-wake"; + }; +}; + &serial_0 { status = "okay"; };
Signature · 1 line
2.15.0