Add Exynos4412-based midas boards support
Subsystems (5)
v2 cover Add Exynos4412-based midas boards support
Hi,
This patch series adds support for a new set of boards, codenamed "midas". These are the Galaxy S3 (m0/m3) and the Galaxy Note 2 (t0). These boards are closely related to trats2 - m0 is a trats2 but with a bootloader geared towards booting Android rather than a traditional Linux distribution - and because of this, the dts files are largely based off what is already in-place for trats2. Trats2 is modified to use the dts files added by this series.
Patch #1 adds documentation for the bindings used by the boards. Patch #2 splits the existing trats2 DTS into the common midas, m0/m3/trats2-specific, and trats2-specific parts. Patch #3 adds the device-tree files for the other boards. Patch #4 enables cpuidle support for all added boards.
Changes since v1:
* Include trats2 in inheritance
* Add the new dtbs to the makefile
* Cleanup style per Krzysztof's comments
Cheers,
Simon
Simon Shields (4):
dt-bindings: samsung: document bindings for Midas family boards
ARM: dts: split trats2 dts in preparation for midas boards
ARM: dts: add Samsung's exynos4412-based midas boards
ARM: exynos: extend cpuidle support to midas boards
.../bindings/arm/samsung/samsung-boards.txt | 4 + arch/arm/boot/dts/Makefile | 3 + arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 144 +++ arch/arm/boot/dts/exynos4412-m0.dts | 14 + arch/arm/boot/dts/exynos4412-m3.dts | 19 + arch/arm/boot/dts/exynos4412-midas.dtsi | 1291 ++++++++++++++++++ arch/arm/boot/dts/exynos4412-t0.dts | 50 + arch/arm/boot/dts/exynos4412-trats2.dts | 1364 +------------------- arch/arm/mach-exynos/exynos.c | 2 +- 9 files changed, 1532 insertions(+), 1359 deletions(-) create mode 100644 arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi create mode 100644 arch/arm/boot/dts/exynos4412-m0.dts create mode 100644 arch/arm/boot/dts/exynos4412-m3.dts create mode 100644 arch/arm/boot/dts/exynos4412-midas.dtsi create mode 100644 arch/arm/boot/dts/exynos4412-t0.dts
Signature · 1 line
2.15.1
A message that is not in the archive (sent off-list or not yet received): 20171214125015.2611-1-simon-WP75azK+jQYgsBAKwltoeQ@public.gmane.org
PATCH v2 1/4 dt-bindings: samsung: document bindings for Midas family boards
Document GT-I9300, GT-I9305, GT-N7100, and GT-N7105 bindings, along with the shared "midas" binding.
--- Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt | 4 ++++ 1 file changed, 4 insertions(+)
Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +4 -0
@@ -9,7 +9,11 @@ Required root node properties: - "samsung,smdkv310" - for Exynos4210-based Samsung SMDKV310 eval board. - "samsung,trats" - for Exynos4210-based Tizen Reference board. - "samsung,universal_c210" - for Exynos4210-based Samsung board. + - "samsung,m0" - for Exynos4412-based Samsung GT-I9300 board. + - "samsung,m3" - for Exynos4412-based Samsung GT-I9305 board. + - "samsung,midas" - for Exynos4412-based Samsung Midas board. - "samsung,smdk4412", - for Exynos4412-based Samsung SMDK4412 eval board. + - "samsung,t0" - for Exynos4412-based Samsung GT-N7100/GT-N7105 board. - "samsung,trats2" - for Exynos4412-based Tizen Reference board. - "samsung,smdk5250" - for Exynos5250-based Samsung SMDK5250 eval board. - "samsung,xyref5260" - for Exynos5260-based Samsung board.
Signature · 6 lines
2.15.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 20171214125015.2611-2-simon-WP75azK+jQYgsBAKwltoeQ@public.gmane.org
Re: [PATCH v2 1/4] dt-bindings: samsung: document bindings for Midas family boards
Quoted 13 lines · Simon Shields
Document GT-I9300, GT-I9305, GT-N7100, and GT-N7105 bindings, along with the shared "midas" binding.
Signed-off-by Simon Shields <[email protected]>--- Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt | 4 ++++ 1 file changed, 4 insertions(+)Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +0
-0
Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt Required root node properties: · line 13
Quoted 5 lines
Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +2
-0@@ -9,7 +9,11 @@ Required root node properties: - "samsung,smdkv310" - for Exynos4210-based Samsung SMDKV310 eval board. - "samsung,trats" - for Exynos4210-based Tizen Reference board. - "samsung,universal_c210" - for Exynos4210-based Samsung board. + - "samsung,m0" - for Exynos4412-based Samsung GT-I9300 board. + - "samsung,m3" - for Exynos4412-based Samsung GT-I9305 board.
Kind of short and it is not clear how "m3" relates to GT-I9305
Quoted 13 lines
Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +2
-0+ - "samsung,midas" - for Exynos4412-based Samsung Midas board. - "samsung,smdk4412", - for Exynos4412-based Samsung SMDK4412 eval board. + - "samsung,t0" - for Exynos4412-based Samsung GT-N7100/GT-N7105 board. - "samsung,trats2" - for Exynos4412-based Tizen Reference board. - "samsung,smdk5250" - for Exynos5250-based Samsung SMDK5250 eval board. - "samsung,xyref5260" - for Exynos5260-based Samsung board.Signature · 6 lines
2.15.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH v2 2/4 ARM: dts: split trats2 dts in preparation for midas boards
In reply to Simon ShieldsThe midas boards share a lot with trats2. Split the common parts out of trats2 into a common midas dtsi and a common "galaxy s3" dts.
--- arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 144 +++ arch/arm/boot/dts/exynos4412-midas.dtsi | 1291 +++++++++++++++++++++++++ arch/arm/boot/dts/exynos4412-trats2.dts | 1364 +-------------------------- 3 files changed, 1441 insertions(+), 1358 deletions(-) create mode 100644 arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi create mode 100644 arch/arm/boot/dts/exynos4412-midas.dtsi
arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi new file +144 -0
@@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "exynos4412-midas.dtsi" + +/ { + regulators { + lcd_vdd3_reg: voltage-regulator-10 { + compatible = "regulator-fixed"; + regulator-name = "LCD_VDD_2.2V"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + enable-active-high; + gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; + }; + + ps_als_reg: voltage-regulator-11 { + compatible = "regulator-fixed"; + regulator-name = "LED_A_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + enable-active-high; + gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>; + }; + }; + + i2c_ak8975: i2c-gpio-10 { + compatible = "i2c-gpio"; + gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ak8975@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; + }; + }; + + i2c_cm36651: i2c-gpio-11 { + compatible = "i2c-gpio"; + gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + cm36651@18 { + compatible = "capella,cm36651"; + reg = <0x18>; + interrupt-parent = <&gpx0>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + vled-supply = <&ps_als_reg>; + }; + }; +}; + +&buck9_reg { + maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; +}; + +&cam_af_reg { + gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&cam_io_reg { + gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&dsi_0 { + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + samsung,burst-clock-frequency = <500000000>; + samsung,esc-clock-frequency = <20000000>; + samsung,pll-clock-frequency = <24000000>; + status = "okay"; + + panel@0 { + compatible = "samsung,s6e8aa0"; + reg = <0>; + vdd3-supply = <&lcd_vdd3_reg>; + vci-supply = <&ldo25_reg>; + reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>; + power-on-delay= <50>; + reset-delay = <100>; + init-delay = <100>; + flip-horizontal; + flip-vertical; + panel-width-mm = <58>; + panel-height-mm = <103>; + + display-timings { + timing-0 { + clock-frequency = <57153600>; + hactive = <720>; + vactive = <1280>; + hfront-porch = <5>; + hback-porch = <5>; + hsync-len = <5>; + vfront-porch = <13>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + }; +}; + +&i2c_0 { + status = "okay"; +}; + +&i2c_3 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + mms114-touchscreen@48 { + compatible = "melfas,mms114"; + reg = <0x48>; + interrupt-parent = <&gpm2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + x-size = <720>; + y-size = <1280>; + avdd-supply = <&ldo23_reg>; + vdd-supply = <&ldo24_reg>; + }; +}; + +&ldo17_reg { + regulator-name = "CAM_SENSOR_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; +}; + +&ldo25_reg { + regulator-name = "LCD_VCC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; +
arch/arm/boot/dts/exynos4412-midas.dtsi new file +1291 -0
1,291 lines not on this page · raw message
arch/arm/boot/dts/exynos4412-trats2.dts +6 -1358
1,380 lines not on this page · raw message
Signature · 1 line
2.15.1
Krzysztof Kozlowski
maintainerRe: [PATCH v2 2/4] ARM: dts: split trats2 dts in preparation for midas boards
Quoted 8 lines · Simon Shields
The midas boards share a lot with trats2. Split the common parts out of trats2 into a common midas dtsi and a common "galaxy s3" dts.
Signed-off-by Simon Shields <[email protected]>--- arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 144 +++ arch/arm/boot/dts/exynos4412-midas.dtsi | 1291 +++++++++++++++++++++++++ arch/arm/boot/dts/exynos4412-trats2.dts | 1364 +--------------------------
Manual review whether you copied the contents directly or with any errors would be a quite big task. Run format-patch with -B30% or try to experiment with other options (most important is -B, but also you can play with -M and -C).
arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi line 1
Quoted 11 lines
3 files changed, 1441 insertions(+), 1358 deletions(-) create mode 100644 arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi create mode 100644 arch/arm/boot/dts/exynos4412-midas.dtsiarch/arm/boot/dts/exynos4412-galaxy-s3.dtsi new file +1
-0@@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0
You need to retain original copyrights because the contents is directly copied.
Quoted 149 lines
arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi new file +143
-0+/dts-v1/; +#include "exynos4412-midas.dtsi" + +/ { + regulators { + lcd_vdd3_reg: voltage-regulator-10 { + compatible = "regulator-fixed"; + regulator-name = "LCD_VDD_2.2V"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + enable-active-high; + gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; + }; + + ps_als_reg: voltage-regulator-11 { + compatible = "regulator-fixed"; + regulator-name = "LED_A_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + enable-active-high; + gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>; + }; + }; + + i2c_ak8975: i2c-gpio-10 { + compatible = "i2c-gpio"; + gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ak8975@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; + }; + }; + + i2c_cm36651: i2c-gpio-11 { + compatible = "i2c-gpio"; + gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + cm36651@18 { + compatible = "capella,cm36651"; + reg = <0x18>; + interrupt-parent = <&gpx0>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + vled-supply = <&ps_als_reg>; + }; + }; +}; + +&buck9_reg { + maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; +}; + +&cam_af_reg { + gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&cam_io_reg { + gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&dsi_0 { + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + samsung,burst-clock-frequency = <500000000>; + samsung,esc-clock-frequency = <20000000>; + samsung,pll-clock-frequency = <24000000>; + status = "okay"; + + panel@0 { + compatible = "samsung,s6e8aa0"; + reg = <0>; + vdd3-supply = <&lcd_vdd3_reg>; + vci-supply = <&ldo25_reg>; + reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>; + power-on-delay= <50>; + reset-delay = <100>; + init-delay = <100>; + flip-horizontal; + flip-vertical; + panel-width-mm = <58>; + panel-height-mm = <103>; + + display-timings { + timing-0 { + clock-frequency = <57153600>; + hactive = <720>; + vactive = <1280>; + hfront-porch = <5>; + hback-porch = <5>; + hsync-len = <5>; + vfront-porch = <13>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + }; +}; + +&i2c_0 { + status = "okay"; +}; + +&i2c_3 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + mms114-touchscreen@48 { + compatible = "melfas,mms114"; + reg = <0x48>; + interrupt-parent = <&gpm2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + x-size = <720>; + y-size = <1280>; + avdd-supply = <&ldo23_reg>; + vdd-supply = <&ldo24_reg>; + }; +}; + +&ldo17_reg { + regulator-name = "CAM_SENSOR_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; +}; + +&ldo25_reg { + regulator-name = "LCD_VCC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; +arch/arm/boot/dts/exynos4412-midas.dtsi new file +0
-0
arch/arm/boot/dts/exynos4412-midas.dtsi line 1
Quoted 1 line
arch/arm/boot/dts/exynos4412-midas.dtsi new file +1
-0@@ -0,0 +1,1291 @@ +// SPDX-License-Identifier: GPL-2.0
You need to retain original copyrights because the contents is directly copied.
Quickly looking at other differences this seems to be a rewrite, not a copy. Basically you are changing Trats2 without mentioning even the changes.
I did not run dtx_diff but I have doubts that it is okay. I expect the same output between two DTBs (if not the same then at least equivalent from functional point of view).
Best regards,
Krzysztof
Krzysztof Kozlowski
maintainerRe: [PATCH v2 2/4] ARM: dts: split trats2 dts in preparation for midas boards
Quoted 10 lines · Krzysztof Kozlowski
Quoted 8 lines · Simon Shields
The midas boards share a lot with trats2. Split the common parts out of trats2 into a common midas dtsi and a common "galaxy s3" dts.
Signed-off-by Simon Shields <[email protected]>--- arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 144 +++ arch/arm/boot/dts/exynos4412-midas.dtsi | 1291 +++++++++++++++++++++++++ arch/arm/boot/dts/exynos4412-trats2.dts | 1364 +--------------------------
Quoted 5 lines
Manual review whether you copied the contents directly or with any errors would be a quite big task. Run format-patch with -B30% or try to experiment with other options (most important is -B, but also you can play with -M and -C).
BTW, you have some whitespace errors:
150: new blank line at EOF.
+
warning: 1 line adds whitespace errors.
Krzysztof
PATCH v2 3/4 ARM: dts: add Samsung's exynos4412-based midas boards
In reply to Simon Shields"midas" is the codename for a family of smartphones released by Samsung Mobile. It includes the Galaxy S3 (GT-I9300/I9305) and the Galaxy Note 2 (GT-N7100/N7105). The boards largely have the same peripherals:
the main differences are touchscreen, display panel and cellular modem.
--- arch/arm/boot/dts/Makefile | 3 +++ arch/arm/boot/dts/exynos4412-m0.dts | 14 +++++++++++ arch/arm/boot/dts/exynos4412-m3.dts | 19 ++++++++++++++ arch/arm/boot/dts/exynos4412-t0.dts | 50 +++++++++++++++++++++++++++++++++++++ 4 files changed, 86 insertions(+) create mode 100644 arch/arm/boot/dts/exynos4412-m0.dts create mode 100644 arch/arm/boot/dts/exynos4412-m3.dts create mode 100644 arch/arm/boot/dts/exynos4412-t0.dts
arch/arm/boot/dts/Makefile +3 -0
@@ -164,11 +164,14 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \ exynos4210-trats.dtb \ exynos4210-universal_c210.dtb \ exynos4412-itop-elite.dtb \ + exynos4412-m0.dtb \ + exynos4412-m3.dtb \ exynos4412-odroidu3.dtb \ exynos4412-odroidx.dtb \ exynos4412-odroidx2.dtb \ exynos4412-origen.dtb \ exynos4412-smdk4412.dtb \ + exynos4412-t0.dtb \ exynos4412-tiny4412.dtb \ exynos4412-trats2.dtb dtb-$(CONFIG_ARCH_EXYNOS5) += \
arch/arm/boot/dts/exynos4412-m0.dts new file +14 -0
@@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "exynos4412-galaxy-s3.dtsi" + +/ { + compatible = "samsung,m0", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; + model = "Samsung M0 (GT-I9300) based on Exynos4412"; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x40000000>; + }; +}; +
arch/arm/boot/dts/exynos4412-m3.dts new file +19 -0
@@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "exynos4412-galaxy-s3.dtsi" + +/ { + compatible = "samsung,m3", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; + model = "Samsung M3 (GT-I9305) based on Exynos4412"; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x80000000>; + }; +}; + +&i2c0_bus { + /* SCL and SDA pins are swapped */ + samsung,pins = "gpd1-1", "gpd1-0"; +}; +
arch/arm/boot/dts/exynos4412-t0.dts new file +50 -0
50 lines not on this page · raw message
Signature · 1 line
2.15.1
PATCH v2 4/4 ARM: exynos: extend cpuidle support to midas boards
In reply to Simon ShieldsExynos4412 can only use cpuidle when running under a compatible bootloader/firmware. The midas family of boards, including trats2, have such a firmware, so allow them to use cpuidle.
--- arch/arm/mach-exynos/exynos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-exynos/exynos.c +1 -1
@@ -196,7 +196,7 @@ static void __init exynos_dt_machine_init(void)#endif if (of_machine_is_compatible ("samsung,exynos4210" ) || (of_machine_is_compatible ("samsung,exynos4412" ) && -of_machine_is_compatible ("samsung,trats2" )) || +of_machine_is_compatible ("samsung,midas" )) ||of_machine_is_compatible ("samsung,exynos3250" ) ||of_machine_is_compatible ("samsung,exynos5250" ))platform_device_register (&exynos_cpuidle);
Signature · 1 line
2.15.1
A message that is not in the archive (sent off-list or not yet received): 20171214125015.2611-5-simon-WP75azK+jQYgsBAKwltoeQ@public.gmane.org
Re: [PATCH v2 4/4] ARM: exynos: extend cpuidle support to midas boards
Quoted 14 lines · Simon Shields
Exynos4412 can only use cpuidle when running under a compatible bootloader/firmware. The midas family of boards, including trats2, have such a firmware, so allow them to use cpuidle.
Signed-off-by Simon Shields <[email protected]>--- arch/arm/mach-exynos/exynos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/mach-exynos/exynos.c +0
-0
arch/arm/mach-exynos/exynos.c static void __init exynos_dt_machine_init(void) · line 199
Quoted 4 lines
arch/arm/mach-exynos/exynos.c +0
-1@@ -196,7 +196,7 @@ static void __init exynos_dt_machine_init(void)#endif if (of_machine_is_compatible("samsung,exynos4210") || (of_machine_is_compatible("samsung,exynos4412") && - of_machine_is_compatible("samsung,trats2")) ||
Please leave trats2 compatible for compatibility with older DTBs, as part of ABI.
Best regards,
Krzysztof
Quoted 7 lines
arch/arm/mach-exynos/exynos.c +1
-1+ of_machine_is_compatible("samsung,midas")) || of_machine_is_compatible("samsung,exynos3250") || of_machine_is_compatible("samsung,exynos5250"))platform_device_register (&exynos_cpuidle); --2.15.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html