Skip to contentSkip to conversation

Fix find_first_zero_bit() usage

PATCH Applied Niklas Cassel 3 participants 7 messages Dec 14, 2017 – Dec 15, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v5 cover Fix find_first_zero_bit() usage

find_first_zero_bit()'s parameter 'size' is defined in bits, not in bytes.

Calling find_first_zero_bit() with the wrong size unit will lead to insidious bugs.

Fix all uses of find_first_zero_bit() called with
sizeof() as size argument in drivers/pci.

Niklas Cassel (3):
PCI: designware-ep: Fix find_first_zero_bit() usage
PCI: endpoint: Populate func_no before calling pci_epc_add_epf()
PCI: endpoint: Fix find_first_zero_bit() usage

 drivers/pci/dwc/pcie-designware-ep.c | 34 ++++++++++++++++++++++++++--------
 drivers/pci/dwc/pcie-designware.h    |  8 ++++++--
 drivers/pci/endpoint/pci-ep-cfs.c    | 19 ++++++++++---------
 3 files changed, 42 insertions(+), 19 deletions(-)
Signature · 1 line
2.14.2
#1 lore raw

PATCH v5 1/3 PCI: designware-ep: Fix find_first_zero_bit() usage

find_first_zero_bit()'s parameter 'size' is defined in bits, not in bytes.

find_first_zero_bit() is called with size in bytes rather than bits, which thus defines a too low upper limit, causing dw_pcie_ep_inbound_atu() to assign iatu index #4 to both bar 4 and bar 5, which makes bar 5 overwrite the settings set by bar 4.

Since the sizes of the bitmaps are known, dynamically allocate the bitmaps, and use the correct size when calling find_first_zero_bit().

Additionally, make sure that ep->num_ob_windows and ep->num_ib_windows, which are obtained from device tree, are smaller than the maximum number of iATUs (MAX_IATU_IN/MAX_IATU_OUT).

Fixes f8aed6ec624f ("PCI: dwc: designware: Add EP mode support")
---
 drivers/pci/dwc/pcie-designware-ep.c | 34 ++++++++++++++++++++++++++--------
 drivers/pci/dwc/pcie-designware.h    |  8 ++++++--
 2 files changed, 32 insertions(+), 10 deletions(-)
drivers/pci/dwc/pcie-designware-ep.c +26 -8
index d53d5f168363..d5eb143040e3 100644
@@ -70,8 +70,7 @@ static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, enum pci_barno bar,
 	u32 free_win;
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
 
-	free_win = find_first_zero_bit(&ep->ib_window_map,
-				       sizeof(ep->ib_window_map));
+	free_win = find_first_zero_bit(ep->ib_window_map, ep->num_ib_windows);
 	if (free_win >= ep->num_ib_windows) {
 		dev_err(pci->dev, "no free inbound window\n");
 		return -EINVAL;
@@ -85,7 +84,7 @@ static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, enum pci_barno bar,
 	}
 
 	ep->bar_to_atu[bar] = free_win;
-	set_bit(free_win, &ep->ib_window_map);
+	set_bit(free_win, ep->ib_window_map);
 
 	return 0;
 }
@@ -96,8 +95,7 @@ static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, phys_addr_t phys_addr,
 	u32 free_win;
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
 
-	free_win = find_first_zero_bit(&ep->ob_window_map,
-				       sizeof(ep->ob_window_map));
+	free_win = find_first_zero_bit(ep->ob_window_map, ep->num_ob_windows);
 	if (free_win >= ep->num_ob_windows) {
 		dev_err(pci->dev, "no free outbound window\n");
 		return -EINVAL;
@@ -106,7 +104,7 @@ static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, phys_addr_t phys_addr,
 	dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM,
 				  phys_addr, pci_addr, size);
 
-	set_bit(free_win, &ep->ob_window_map);
+	set_bit(free_win, ep->ob_window_map);
 	ep->outbound_addr[free_win] = phys_addr;
 
 	return 0;
@@ -121,7 +119,7 @@ static void dw_pcie_ep_clear_bar(struct pci_epc *epc, enum pci_barno bar)
 	dw_pcie_ep_reset_bar(pci, bar);
 
 	dw_pcie_disable_atu(pci, atu_index, DW_PCIE_REGION_INBOUND);
-	clear_bit(atu_index, &ep->ib_window_map);
+	clear_bit(atu_index, ep->ib_window_map);
 }
 
 static int dw_pcie_ep_set_bar(struct pci_epc *epc, enum pci_barno bar,
@@ -175,7 +173,7 @@ static void dw_pcie_ep_unmap_addr(struct pci_epc *epc, phys_addr_t addr)
 		return;
 
 	dw_pcie_disable_atu(pci, atu_index, DW_PCIE_REGION_OUTBOUND);
-	clear_bit(atu_index, &ep->ob_window_map);
+	clear_bit(atu_index, ep->ob_window_map);
 }
 
 static int dw_pcie_ep_map_addr(struct pci_epc *epc, phys_addr_t addr,
@@ -298,12 +296,32 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 		dev_err(dev, "unable to read *num-ib-windows* property\n");
 		return ret;
 	}
+	if (ep->num_ib_windows > MAX_IATU_IN) {
+		dev_err(dev, "invalid *num-ib-windows*\n");
+		return -EINVAL;
+	}
 
 	ret = of_property_read_u32(np, "num-ob-windows", &ep->num_ob_windows);
 	if (ret < 0) {
 		dev_err(dev, "unable to read *num-ob-windows* property\n");
 		return ret;
 	}
+	if (ep->num_ob_windows > MAX_IATU_OUT) {
+		dev_err(dev, "invalid *num-ob-windows*\n");
+		return -EINVAL;
+	}
+
+	ep->ib_window_map = devm_kzalloc(dev, sizeof(long) *
+					 BITS_TO_LONGS(ep->num_ib_windows),
+					 GFP_KERNEL);
+	if (!ep->ib_window_map)
+		return -ENOMEM;
+
+	ep->ob_window_map = devm_kzalloc(dev, sizeof(long) *
+					 BITS_TO_LONGS(ep->num_ob_windows),
+					 GFP_KERNEL);
+	if (!ep->ob_window_map)
+		return -ENOMEM;
 
 	addr = devm_kzalloc(dev, sizeof(phys_addr_t) * ep->num_ob_windows,
 			    GFP_KERNEL);
drivers/pci/dwc/pcie-designware.h +6 -2
index e5d9d77b778e..e6fd0b024b21 100644
@@ -113,6 +113,10 @@
 #define MAX_MSI_IRQS			32
 #define MAX_MSI_CTRLS			(MAX_MSI_IRQS / 32)
 
+/* Maximum number of inbound/outbound iATUs */
+#define MAX_IATU_IN			256
+#define MAX_IATU_OUT			256
+
 struct pcie_port;
 struct dw_pcie;
 struct dw_pcie_ep;
@@ -192,8 +196,8 @@ struct dw_pcie_ep {
 	size_t			page_size;
 	u8			bar_to_atu[6];
 	phys_addr_t		*outbound_addr;
-	unsigned long		ib_window_map;
-	unsigned long		ob_window_map;
+	unsigned long		*ib_window_map;
+	unsigned long		*ob_window_map;
 	u32			num_ib_windows;
 	u32			num_ob_windows;
 };
Signature · 1 line
2.14.2
#2 lore raw

PATCH v5 2/3 PCI: endpoint: Populate func_no before calling pci_epc_add_epf()

In reply to Niklas Cassel

func_no is a member of struct pci_epf.
struct pci_epf is used as an argument to pci_epc_add_epf(), therefore func_no should be populated before calling pci_epc_add_epf().

Fixes d74679911610 ("PCI: endpoint: Introduce configfs entry for configuring EP functions")
---
 drivers/pci/endpoint/pci-ep-cfs.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)
drivers/pci/endpoint/pci-ep-cfs.c +6 -8
index 4f74386c1ced..e8f65eb51c1a 100644
@@ -97,22 +97,20 @@ static int pci_epc_epf_link(struct config_item *epc_item,
 {
 	int ret;
 	u32 func_no = 0;
-	struct pci_epc *epc;
-	struct pci_epf *epf;
 	struct pci_epf_group *epf_group = to_pci_epf_group(epf_item);
 	struct pci_epc_group *epc_group = to_pci_epc_group(epc_item);
-
-	epc = epc_group->epc;
-	epf = epf_group->epf;
-	ret = pci_epc_add_epf(epc, epf);
-	if (ret)
-		goto err_add_epf;
+	struct pci_epc *epc = epc_group->epc;
+	struct pci_epf *epf = epf_group->epf;
 
 	func_no = find_first_zero_bit(&epc_group->function_num_map,
 				      sizeof(epc_group->function_num_map));
 	set_bit(func_no, &epc_group->function_num_map);
 	epf->func_no = func_no;
 
+	ret = pci_epc_add_epf(epc, epf);
+	if (ret)
+		goto err_add_epf;
+
 	ret = pci_epf_bind(epf);
 	if (ret)
 		goto err_epf_bind;
Signature · 1 line
2.14.2
Acked-by on v5 2/3
#3 lore raw

Re: [PATCH v5 2/3] PCI: endpoint: Populate func_no before calling pci_epc_add_epf()

Quoted 7 lines · Niklas Cassel

func_no is a member of struct pci_epf.
struct pci_epf is used as an argument to pci_epc_add_epf(), therefore func_no should be populated before calling pci_epc_add_epf().

Fixes d74679911610 ("PCI: endpoint: Introduce configfs entry for configuring EP functions")
Quoted 38 lines
---
 drivers/pci/endpoint/pci-ep-cfs.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)
drivers/pci/endpoint/pci-ep-cfs.c +6 -8
index 4f74386c1ced..e8f65eb51c1a 100644
@@ -97,22 +97,20 @@ static int pci_epc_epf_link(struct config_item *epc_item,
 {
 	int ret;
 	u32 func_no = 0;
-	struct pci_epc *epc;
-	struct pci_epf *epf;
 	struct pci_epf_group *epf_group = to_pci_epf_group(epf_item);
 	struct pci_epc_group *epc_group = to_pci_epc_group(epc_item);
-
-	epc = epc_group->epc;
-	epf = epf_group->epf;
-	ret = pci_epc_add_epf(epc, epf);
-	if (ret)
-		goto err_add_epf;
+	struct pci_epc *epc = epc_group->epc;
+	struct pci_epf *epf = epf_group->epf;
 
 	func_no = find_first_zero_bit(&epc_group->function_num_map,
 				      sizeof(epc_group->function_num_map));
 	set_bit(func_no, &epc_group->function_num_map);
 	epf->func_no = func_no;
 
+	ret = pci_epc_add_epf(epc, epf);
+	if (ret)
+		goto err_add_epf;
+
 	ret = pci_epf_bind(epf);
 	if (ret)
 		goto err_epf_bind;
#4 lore raw

PATCH v5 3/3 PCI: endpoint: Fix find_first_zero_bit() usage

In reply to Niklas Cassel

find_first_zero_bit()'s parameter 'size' is defined in bits, not in bytes.

Calling find_first_zero_bit() with the wrong size unit will lead to insidious bugs.

Fix this by calling find_first_zero_bit() with size BITS_PER_LONG, rather than sizeof() and add missing find_first_zero_bit() return handling.

Fixes d74679911610 ("PCI: endpoint: Introduce configfs entry for configuring EP functions")
---
 drivers/pci/endpoint/pci-ep-cfs.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/pci/endpoint/pci-ep-cfs.c +4 -1
index e8f65eb51c1a..c9a2fb9dd49d 100644
@@ -103,7 +103,10 @@ static int pci_epc_epf_link(struct config_item *epc_item,
 	struct pci_epf *epf = epf_group->epf;
 
 	func_no = find_first_zero_bit(&epc_group->function_num_map,
-				      sizeof(epc_group->function_num_map));
+				      BITS_PER_LONG);
+	if (func_no >= BITS_PER_LONG)
+		return -EINVAL;
+
 	set_bit(func_no, &epc_group->function_num_map);
 	epf->func_no = func_no;
 
Signature · 1 line
2.14.2
Acked-by on v5 3/3
#5 lore raw

Re: [PATCH v5 3/3] PCI: endpoint: Fix find_first_zero_bit() usage

Quoted 6 lines · Niklas Cassel

find_first_zero_bit()'s parameter 'size' is defined in bits, not in bytes.

Calling find_first_zero_bit() with the wrong size unit will lead to insidious bugs.

Quoted 6 lines

Fix this by calling find_first_zero_bit() with size BITS_PER_LONG, rather than sizeof() and add missing find_first_zero_bit() return handling.

Fixes d74679911610 ("PCI: endpoint: Introduce configfs entry for configuring EP functions")
Quoted 21 lines
---
 drivers/pci/endpoint/pci-ep-cfs.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/pci/endpoint/pci-ep-cfs.c +4 -1
index e8f65eb51c1a..c9a2fb9dd49d 100644
@@ -103,7 +103,10 @@ static int pci_epc_epf_link(struct config_item *epc_item,
 	struct pci_epf *epf = epf_group->epf;
 
 	func_no = find_first_zero_bit(&epc_group->function_num_map,
-				      sizeof(epc_group->function_num_map));
+				      BITS_PER_LONG);
+	if (func_no >= BITS_PER_LONG)
+		return -EINVAL;
+
 	set_bit(func_no, &epc_group->function_num_map);
 	epf->func_no = func_no;
 
#6 lore raw
In reply to Niklas Cassel
Quoted 14 lines · Niklas Cassel

find_first_zero_bit()'s parameter 'size' is defined in bits, not in bytes.

Calling find_first_zero_bit() with the wrong size unit will lead to insidious bugs.

Fix all uses of find_first_zero_bit() called with
sizeof() as size argument in drivers/pci.

Niklas Cassel (3):
PCI: designware-ep: Fix find_first_zero_bit() usage
PCI: endpoint: Populate func_no before calling pci_epc_add_epf()
PCI: endpoint: Fix find_first_zero_bit() usage

Quoted 4 lines
 drivers/pci/dwc/pcie-designware-ep.c | 34 ++++++++++++++++++++++++++--------
 drivers/pci/dwc/pcie-designware.h    |  8 ++++++--
 drivers/pci/endpoint/pci-ep-cfs.c    | 19 ++++++++++---------
 3 files changed, 42 insertions(+), 19 deletions(-)

Applied to pci/endpoint for v4.16 (updated some commit logs) with Kishon's ACKs.

Thanks,
Lorenzo