Fix find_first_zero_bit() usage
Subsystems (2)
v5 cover Fix find_first_zero_bit() usage
find_first_zero_bit()'s parameter 'size' is defined in bits, not in bytes.
Calling find_first_zero_bit() with the wrong size unit will lead to insidious bugs.
Fix all uses of find_first_zero_bit() called withsizeof() as size argument in drivers/pci.
Niklas Cassel (3):
PCI: designware-ep: Fix find_first_zero_bit() usage
PCI: endpoint: Populate func_no before calling pci_epc_add_epf()
PCI: endpoint: Fix find_first_zero_bit() usage
drivers/pci/dwc/pcie-designware-ep.c | 34 ++++++++++++++++++++++++++-------- drivers/pci/dwc/pcie-designware.h | 8 ++++++-- drivers/pci/endpoint/pci-ep-cfs.c | 19 ++++++++++--------- 3 files changed, 42 insertions(+), 19 deletions(-)
Signature · 1 line
2.14.2
PATCH v5 1/3 PCI: designware-ep: Fix find_first_zero_bit() usage
find_first_zero_bit()'s parameter 'size' is defined in bits, not in bytes.
find_first_zero_bit() is called with size in bytes rather than bits, which thus defines a too low upper limit, causing dw_pcie_ep_inbound_atu() to assign iatu index #4 to both bar 4 and bar 5, which makes bar 5 overwrite the settings set by bar 4.
Since the sizes of the bitmaps are known, dynamically allocate the bitmaps, and use the correct size when calling find_first_zero_bit().
Additionally, make sure that ep->num_ob_windows and ep->num_ib_windows, which are obtained from device tree, are smaller than the maximum number of iATUs (MAX_IATU_IN/MAX_IATU_OUT).
--- drivers/pci/dwc/pcie-designware-ep.c | 34 ++++++++++++++++++++++++++-------- drivers/pci/dwc/pcie-designware.h | 8 ++++++-- 2 files changed, 32 insertions(+), 10 deletions(-)
drivers/pci/dwc/pcie-designware-ep.c +26 -8
@@ -70,8 +70,7 @@ static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, enum pci_barno bar,u32 free_win;struct dw_pcie *pci =to_dw_pcie_from_ep (ep); - free_win =find_first_zero_bit (&ep->ib_window_map, -sizeof (ep->ib_window_map)); + free_win =find_first_zero_bit (ep->ib_window_map, ep->num_ib_windows);if (free_win >= ep->num_ib_windows) {dev_err (pci->dev,"no free inbound window\n" );return -EINVAL ;
@@ -85,7 +84,7 @@ static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, enum pci_barno bar, } ep->bar_to_atu[bar] = free_win; -set_bit (free_win, &ep->ib_window_map); +set_bit (free_win, ep->ib_window_map);return 0 ; }
@@ -96,8 +95,7 @@ static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, phys_addr_t phys_addr,u32 free_win;struct dw_pcie *pci =to_dw_pcie_from_ep (ep); - free_win =find_first_zero_bit (&ep->ob_window_map, -sizeof (ep->ob_window_map)); + free_win =find_first_zero_bit (ep->ob_window_map, ep->num_ob_windows);if (free_win >= ep->num_ob_windows) {dev_err (pci->dev,"no free outbound window\n" );return -EINVAL ;
@@ -106,7 +104,7 @@ static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, phys_addr_t phys_addr,dw_pcie_prog_outbound_atu (pci, free_win,PCIE_ATU_TYPE_MEM , phys_addr, pci_addr, size); -set_bit (free_win, &ep->ob_window_map); +set_bit (free_win, ep->ob_window_map); ep->outbound_addr[free_win] = phys_addr;return 0 ;
@@ -121,7 +119,7 @@ static void dw_pcie_ep_clear_bar(struct pci_epc *epc, enum pci_barno bar)dw_pcie_ep_reset_bar (pci, bar);dw_pcie_disable_atu (pci, atu_index,DW_PCIE_REGION_INBOUND ); -clear_bit (atu_index, &ep->ib_window_map); +clear_bit (atu_index, ep->ib_window_map); } static int dw_pcie_ep_set_bar(struct pci_epc *epc, enum pci_barno bar,
@@ -175,7 +173,7 @@ static void dw_pcie_ep_unmap_addr(struct pci_epc *epc, phys_addr_t addr)return ;dw_pcie_disable_atu (pci, atu_index,DW_PCIE_REGION_OUTBOUND ); -clear_bit (atu_index, &ep->ob_window_map); +clear_bit (atu_index, ep->ob_window_map); } static int dw_pcie_ep_map_addr(struct pci_epc *epc, phys_addr_t addr,
@@ -298,12 +296,32 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)dev_err (dev,"unable to read *num-ib-windows* property\n" );return ret; } +if (ep->num_ib_windows >MAX_IATU_IN ) { +dev_err (dev,"invalid *num-ib-windows*\n" ); +return -EINVAL ; + } ret =of_property_read_u32 (np,"num-ob-windows" , &ep->num_ob_windows);if (ret <0 ) {dev_err (dev,"unable to read *num-ob-windows* property\n" );return ret; } +if (ep->num_ob_windows >MAX_IATU_OUT ) { +dev_err (dev,"invalid *num-ob-windows*\n" ); +return -EINVAL ; + } + + ep->ib_window_map =devm_kzalloc (dev,sizeof (long ) * +BITS_TO_LONGS (ep->num_ib_windows), +GFP_KERNEL ); +if (!ep->ib_window_map) +return -ENOMEM ; + + ep->ob_window_map =devm_kzalloc (dev,sizeof (long ) * +BITS_TO_LONGS (ep->num_ob_windows), +GFP_KERNEL ); +if (!ep->ob_window_map) +return -ENOMEM ; addr =devm_kzalloc (dev,sizeof (phys_addr_t) * ep->num_ob_windows,GFP_KERNEL );
drivers/pci/dwc/pcie-designware.h +6 -2
@@ -113,6 +113,10 @@#define MAX_MSI_IRQS 32#define MAX_MSI_CTRLS (MAX_MSI_IRQS / 32) +/* Maximum number of inbound/outbound iATUs */ +#define MAX_IATU_IN 256 +#define MAX_IATU_OUT 256 +struct pcie_port ;struct dw_pcie ;struct dw_pcie_ep ;
@@ -192,8 +196,8 @@ struct dw_pcie_ep {size_t page_size;u8 bar_to_atu[6 ];phys_addr_t *outbound_addr; -unsigned long ib_window_map; -unsigned long ob_window_map; +unsigned long *ib_window_map; +unsigned long *ob_window_map;u32 num_ib_windows;u32 num_ob_windows; };
Signature · 1 line
2.14.2
PATCH v5 2/3 PCI: endpoint: Populate func_no before calling pci_epc_add_epf()
In reply to Niklas Casselfunc_no is a member of struct pci_epf.
struct pci_epf is used as an argument to pci_epc_add_epf(), therefore func_no should be populated before calling pci_epc_add_epf().
--- drivers/pci/endpoint/pci-ep-cfs.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)
drivers/pci/endpoint/pci-ep-cfs.c +6 -8
@@ -97,22 +97,20 @@ static int pci_epc_epf_link(struct config_item *epc_item, {int ret;u32 func_no =0 ; -struct pci_epc *epc; -struct pci_epf *epf;struct pci_epf_group *epf_group =to_pci_epf_group (epf_item);struct pci_epc_group *epc_group =to_pci_epc_group (epc_item); - - epc = epc_group->epc; - epf = epf_group->epf; - ret =pci_epc_add_epf (epc, epf); -if (ret) - goto err_add_epf; +struct pci_epc *epc = epc_group->epc; +struct pci_epf *epf = epf_group->epf; func_no =find_first_zero_bit (&epc_group->function_num_map,sizeof (epc_group->function_num_map));set_bit (func_no, &epc_group->function_num_map); epf->func_no = func_no; + ret =pci_epc_add_epf (epc, epf); +if (ret) + goto err_add_epf; + ret =pci_epf_bind (epf);if (ret) goto err_epf_bind;
Signature · 1 line
2.14.2
Re: [PATCH v5 2/3] PCI: endpoint: Populate func_no before calling pci_epc_add_epf()
Quoted 7 lines · Niklas Cassel
func_nois a member of structpci_epf.
structpci_epfis used as an argument topci_epc_add_epf(), thereforefunc_noshould be populated before callingpci_epc_add_epf().Fixes d74679911610 ("PCI: endpoint: Introduce configfs entry for configuring EP functions")Signed-off-by Niklas Cassel <[email protected]>Suggested-by Kishon Vijay Abraham I <[email protected]>
Quoted 38 lines
--- drivers/pci/endpoint/pci-ep-cfs.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)drivers/pci/endpoint/pci-ep-cfs.c +6
-8@@ -97,22 +97,20 @@ static int pci_epc_epf_link(struct config_item *epc_item, {int ret;u32 func_no =0 ; -struct pci_epc *epc; -struct pci_epf *epf;struct pci_epf_group *epf_group =to_pci_epf_group (epf_item);struct pci_epc_group *epc_group =to_pci_epc_group (epc_item); - - epc = epc_group->epc; - epf = epf_group->epf; - ret =pci_epc_add_epf (epc, epf); -if (ret) - goto err_add_epf; +struct pci_epc *epc = epc_group->epc; +struct pci_epf *epf = epf_group->epf; func_no =find_first_zero_bit (&epc_group->function_num_map,sizeof (epc_group->function_num_map));set_bit (func_no, &epc_group->function_num_map); epf->func_no = func_no; + ret =pci_epc_add_epf (epc, epf); +if (ret) + goto err_add_epf; + ret =pci_epf_bind (epf);if (ret) goto err_epf_bind;
PATCH v5 3/3 PCI: endpoint: Fix find_first_zero_bit() usage
In reply to Niklas Casselfind_first_zero_bit()'s parameter 'size' is defined in bits, not in bytes.
Calling find_first_zero_bit() with the wrong size unit will lead to insidious bugs.
Fix this by calling find_first_zero_bit() with size BITS_PER_LONG, rather than sizeof() and add missing find_first_zero_bit() return handling.
--- drivers/pci/endpoint/pci-ep-cfs.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/pci/endpoint/pci-ep-cfs.c +4 -1
@@ -103,7 +103,10 @@ static int pci_epc_epf_link(struct config_item *epc_item,struct pci_epf *epf = epf_group->epf; func_no =find_first_zero_bit (&epc_group->function_num_map, -sizeof (epc_group->function_num_map)); +BITS_PER_LONG ); +if (func_no >=BITS_PER_LONG ) +return -EINVAL ; +set_bit (func_no, &epc_group->function_num_map); epf->func_no = func_no;
Signature · 1 line
2.14.2
Re: [PATCH v5 3/3] PCI: endpoint: Fix find_first_zero_bit() usage
Quoted 6 lines · Niklas Cassel
find_first_zero_bit()'s parameter 'size' is defined in bits, not in bytes.
Calling
find_first_zero_bit()with the wrong size unit will lead to insidious bugs.
Quoted 6 lines
Fix this by calling
find_first_zero_bit()with sizeBITS_PER_LONG, rather thansizeof()and add missingfind_first_zero_bit()return handling.Fixes d74679911610 ("PCI: endpoint: Introduce configfs entry for configuring EP functions")Signed-off-by Niklas Cassel <[email protected]>
Quoted 21 lines
--- drivers/pci/endpoint/pci-ep-cfs.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)drivers/pci/endpoint/pci-ep-cfs.c +4
-1@@ -103,7 +103,10 @@ static int pci_epc_epf_link(struct config_item *epc_item,struct pci_epf *epf = epf_group->epf; func_no =find_first_zero_bit (&epc_group->function_num_map, -sizeof (epc_group->function_num_map)); +BITS_PER_LONG ); +if (func_no >=BITS_PER_LONG ) +return -EINVAL ; +set_bit (func_no, &epc_group->function_num_map); epf->func_no = func_no;
Lorenzo Pieralisi
AppliedQuoted 14 lines · Niklas Cassel
find_first_zero_bit()'s parameter 'size' is defined in bits, not in bytes.
Calling
find_first_zero_bit()with the wrong size unit will lead to insidious bugs.Fix all uses of
find_first_zero_bit()called withsizeof()as size argument indrivers/pci.Niklas Cassel (3):
PCI: designware-ep: Fixfind_first_zero_bit()usage
PCI: endpoint: Populatefunc_nobefore callingpci_epc_add_epf()
PCI: endpoint: Fixfind_first_zero_bit()usage
Quoted 4 lines
drivers/pci/dwc/pcie-designware-ep.c | 34 ++++++++++++++++++++++++++-------- drivers/pci/dwc/pcie-designware.h | 8 ++++++-- drivers/pci/endpoint/pci-ep-cfs.c | 19 ++++++++++--------- 3 files changed, 42 insertions(+), 19 deletions(-)
Applied to pci/endpoint for v4.16 (updated some commit logs) with Kishon's ACKs.
Thanks,
Lorenzo