Skip to contentSkip to conversation

qmp: 'wakeup-suspend-support' in query-target

PATCH Superseded Daniel Henrique Barboza 2 participants 6 messages Jan 3, 2018 – Jan 4, 2018

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v3 cover qmp: 'wakeup-suspend-support' in query-target

v3:
- added a "(since 2.12)" notation in the new flag, as suggested by Eric Blake
- added a "backwards compatible" note in the commit msg
- previous version link:
https://lists.gnu.org/archive/html/qemu-devel/2018-01/msg00093.html

v2:
- changed the approach based on v1 discussions: instead of a new API, add the required flag in QMP query-target
- dropped patch 2 since query-target does not have an HMP counterpart
- previous version link:
https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg00889.html

Daniel Henrique Barboza (2):
qmp: adding 'wakeup-suspend-support' in query-target
qga: update guest-suspend-ram and guest-suspend-hybrid descriptions

 arch_init.c             |  1 +
 include/sysemu/sysemu.h |  1 +
 qapi-schema.json        |  4 +++-
 qga/qapi-schema.json    | 14 ++++++++++----
 vl.c                    |  5 +++++
 5 files changed, 20 insertions(+), 5 deletions(-)
Signature · 1 line
2.13.6
#1 lore raw

PATCH v3 1/2 qmp: adding 'wakeup-suspend-support' in query-target

When issuing the qmp/hmp 'system_wakeup' command, what happens in a nutshell is:

- qmp_system_wakeup_request set runstate to RUNNING, sets a wakeup_reason and notify the event
- in the main_loop, all vcpus are paused, a system reset is issued, all subscribers of wakeup_notifiers receives a notification, vcpus are then resumed and the wake up QAPI event is fired

Note that this procedure alone doesn't ensure that the guest will awake from SUSPENDED state - the subscribers of the wake up event must take action to resume the guest, otherwise the guest will simply reboot.

At this moment there are only two subscribers of the wake up event: one in hw/acpi/core.c and another one in hw/i386/xen/xen-hvm.c. This means that system_wakeup does not work as intended with other architectures.

However, only the presence of 'system_wakeup' is required for QGA to support 'guest-suspend-ram' and 'guest-suspend-hybrid' at this moment. This means that the user/management will expect to suspend the guest using one of those suspend commands and then resume execution using system_wakeup, regardless of the support offered in system_wakeup in the first place.

This patch adds a new flag called 'wakeup-suspend-support' in TargetInfo that allows the caller to query if the guest supports wake up from suspend via system_wakeup. It goes over the subscribers of the wake up event and, if it's empty, it assumes that the guest does not support wake up from suspend (and thus, pm-suspend itself).

This is the expected output of query-target when running a x86 guest:

{"execute" : "query-target"}
{"return": {"arch": "x86_64", "wakeup-suspend-support": true}}

This is the output when running a pseries guest:

{"execute" : "query-target"}
{"return": {"arch": "ppc64", "wakeup-suspend-support": false}}

Given that the TargetInfo structure is read-only, adding a new flag to it is backwards compatible. There is no need to deprecate the old TargetInfo format.

With this extra tool, management can avoid situations where a guest that does not have proper suspend/wake capabilities ends up in inconsistent state (e.g.
https://github.com/open-power-host-os/qemu/issues/31).

---
 arch_init.c             | 1 +
 include/sysemu/sysemu.h | 1 +
 qapi-schema.json        | 4 +++-
 vl.c                    | 5 +++++
 4 files changed, 10 insertions(+), 1 deletion(-)
arch_init.c +1 -0
index a0b8ed6167..9c5c519d9d 100644
@@ -109,6 +109,7 @@ TargetInfo *qmp_query_target(Error **errp)
     TargetInfo *info = g_malloc0(sizeof(*info));
 
     info->arch = g_strdup(TARGET_NAME);
+    info->wakeup_suspend_support = !qemu_wakeup_notifier_is_empty();
 
     return info;
 }
include/sysemu/sysemu.h +1 -0
index 31612caf10..b15374e0b8 100644
@@ -69,6 +69,7 @@ typedef enum WakeupReason {
 void qemu_system_reset_request(ShutdownCause reason);
 void qemu_system_suspend_request(void);
 void qemu_register_suspend_notifier(Notifier *notifier);
+bool qemu_wakeup_notifier_is_empty(void);
 void qemu_system_wakeup_request(WakeupReason reason);
 void qemu_system_wakeup_enable(WakeupReason reason, bool enabled);
 void qemu_register_wakeup_notifier(Notifier *notifier);
qapi-schema.json +3 -1
index 5c06745c79..2f1c08fde7 100644
@@ -2388,11 +2388,13 @@
 # Information describing the QEMU target.
 #
 # @arch: the target architecture (eg "x86_64", "i386", etc)
+# @wakeup-suspend-support: true if the target supports wake up from
+#                          suspend (since 2.12)
 #
 # Since: 1.2.0
 ##
 { 'struct': 'TargetInfo',
-  'data': { 'arch': 'str' } }
+  'data': { 'arch': 'str', 'wakeup-suspend-support': 'bool' } }
 
 ##
 # @query-target:
vl.c +5 -0
index d3a5c5d021..871c1f9bd1 100644
@@ -1844,6 +1844,11 @@ void qemu_register_wakeup_notifier(Notifier *notifier)
     notifier_list_add(&wakeup_notifiers, notifier);
 }
 
+bool qemu_wakeup_notifier_is_empty(void)
+{
+    return QLIST_EMPTY(&wakeup_notifiers.notifiers);
+}
+
 void qemu_system_killed(int signal, pid_t pid)
 {
     shutdown_signal = signal;
Signature · 1 line
2.13.6
#2 lore raw

Re: [Qemu-devel] [PATCH v3 1/2] qmp: adding 'wakeup-suspend-support' in query-target

Quoting Daniel Henrique Barboza (2018-01-03 05:54:54)

Quoted 43 lines

When issuing the qmp/hmp 'system_wakeup' command, what happens in a nutshell is:

- qmp_system_wakeup_request set runstate to RUNNING, sets a wakeup_reason and notify the event
- in the main_loop, all vcpus are paused, a system reset is issued, all subscribers of wakeup_notifiers receives a notification, vcpus are then resumed and the wake up QAPI event is fired

Note that this procedure alone doesn't ensure that the guest will awake from SUSPENDED state - the subscribers of the wake up event must take action to resume the guest, otherwise the guest will simply reboot.

At this moment there are only two subscribers of the wake up event: one in hw/acpi/core.c and another one in hw/i386/xen/xen-hvm.c. This means that system_wakeup does not work as intended with other architectures.

However, only the presence of 'system_wakeup' is required for QGA to support 'guest-suspend-ram' and 'guest-suspend-hybrid' at this moment. This means that the user/management will expect to suspend the guest using one of those suspend commands and then resume execution using system_wakeup, regardless of the support offered in system_wakeup in the first place.

This patch adds a new flag called 'wakeup-suspend-support' in TargetInfo that allows the caller to query if the guest supports wake up from suspend via system_wakeup. It goes over the subscribers of the wake up event and, if it's empty, it assumes that the guest does not support wake up from suspend (and thus, pm-suspend itself).

This is the expected output of query-target when running a x86 guest:

{"execute" : "query-target"}
{"return": {"arch": "x86_64", "wakeup-suspend-support": true}}

This is the output when running a pseries guest:

{"execute" : "query-target"}
{"return": {"arch": "ppc64", "wakeup-suspend-support": false}}

Given that the TargetInfo structure is read-only, adding a new flag to it is backwards compatible. There is no need to deprecate the old TargetInfo format.

Quoted 6 lines

With this extra tool, management can avoid situations where a guest that does not have proper suspend/wake capabilities ends up in inconsistent state (e.g.
https://github.com/open-power-host-os/qemu/issues/31).

Looks good to me, but I'm a little concerned that someone might register a wakeup notifier in the future for some reason other than actually supporting wakeup (perhaps as an informational thing, or as as part of some change to general lifecycle event tracking). I'm not sure it's currently worth adding an explicit flag that users need to set, but maybe at least some comments around qemu_register_wakeup_notifier() noting the potential side-effects of doing such a thing would be warranted.

Quoted 69 lines
---
 arch_init.c             | 1 +
 include/sysemu/sysemu.h | 1 +
 qapi-schema.json        | 4 +++-
 vl.c                    | 5 +++++
 4 files changed, 10 insertions(+), 1 deletion(-)
arch_init.c +1 -0
index a0b8ed6167..9c5c519d9d 100644
@@ -109,6 +109,7 @@ TargetInfo *qmp_query_target(Error **errp)
     TargetInfo *info = g_malloc0(sizeof(*info));
 
     info->arch = g_strdup(TARGET_NAME);
+    info->wakeup_suspend_support = !qemu_wakeup_notifier_is_empty();
 
     return info;
 }
include/sysemu/sysemu.h +1 -0
index 31612caf10..b15374e0b8 100644
@@ -69,6 +69,7 @@ typedef enum WakeupReason {
 void qemu_system_reset_request(ShutdownCause reason);
 void qemu_system_suspend_request(void);
 void qemu_register_suspend_notifier(Notifier *notifier);
+bool qemu_wakeup_notifier_is_empty(void);
 void qemu_system_wakeup_request(WakeupReason reason);
 void qemu_system_wakeup_enable(WakeupReason reason, bool enabled);
 void qemu_register_wakeup_notifier(Notifier *notifier);
qapi-schema.json +3 -1
index 5c06745c79..2f1c08fde7 100644
@@ -2388,11 +2388,13 @@
 # Information describing the QEMU target.
 #
 # @arch: the target architecture (eg "x86_64", "i386", etc)
+# @wakeup-suspend-support: true if the target supports wake up from
+#                          suspend (since 2.12)
 #
 # Since: 1.2.0
 ##
 { 'struct': 'TargetInfo',
-  'data': { 'arch': 'str' } }
+  'data': { 'arch': 'str', 'wakeup-suspend-support': 'bool' } }
 
 ##
 # @query-target:
vl.c +5 -0
index d3a5c5d021..871c1f9bd1 100644
@@ -1844,6 +1844,11 @@ void qemu_register_wakeup_notifier(Notifier *notifier)
     notifier_list_add(&wakeup_notifiers, notifier);
 }
 
+bool qemu_wakeup_notifier_is_empty(void)
+{
+    return QLIST_EMPTY(&wakeup_notifiers.notifiers);
+}
+
 void qemu_system_killed(int signal, pid_t pid)
 {
     shutdown_signal = signal;
Signature · 1 line
2.13.6
#3 lore raw

Re: [Qemu-devel] [PATCH v3 1/2] qmp: adding 'wakeup-suspend-support' in query-target

Quoted 50 lines · Michael Roth

Quoting Daniel Henrique Barboza (2018-01-03 05:54:54)

Quoted 43 lines

When issuing the qmp/hmp 'system_wakeup' command, what happens in a nutshell is:

- qmp_system_wakeup_request set runstate to RUNNING, sets a wakeup_reason and notify the event
- in the main_loop, all vcpus are paused, a system reset is issued, all subscribers of wakeup_notifiers receives a notification, vcpus are then resumed and the wake up QAPI event is fired

Note that this procedure alone doesn't ensure that the guest will awake from SUSPENDED state - the subscribers of the wake up event must take action to resume the guest, otherwise the guest will simply reboot.

At this moment there are only two subscribers of the wake up event: one in hw/acpi/core.c and another one in hw/i386/xen/xen-hvm.c. This means that system_wakeup does not work as intended with other architectures.

However, only the presence of 'system_wakeup' is required for QGA to support 'guest-suspend-ram' and 'guest-suspend-hybrid' at this moment. This means that the user/management will expect to suspend the guest using one of those suspend commands and then resume execution using system_wakeup, regardless of the support offered in system_wakeup in the first place.

This patch adds a new flag called 'wakeup-suspend-support' in TargetInfo that allows the caller to query if the guest supports wake up from suspend via system_wakeup. It goes over the subscribers of the wake up event and, if it's empty, it assumes that the guest does not support wake up from suspend (and thus, pm-suspend itself).

This is the expected output of query-target when running a x86 guest:

{"execute" : "query-target"}
{"return": {"arch": "x86_64", "wakeup-suspend-support": true}}

This is the output when running a pseries guest:

{"execute" : "query-target"}
{"return": {"arch": "ppc64", "wakeup-suspend-support": false}}

Given that the TargetInfo structure is read-only, adding a new flag to it is backwards compatible. There is no need to deprecate the old TargetInfo format.

Quoted 6 lines

With this extra tool, management can avoid situations where a guest that does not have proper suspend/wake capabilities ends up in inconsistent state (e.g.
https://github.com/open-power-host-os/qemu/issues/31).

Quoted 8 lines

Looks good to me, but I'm a little concerned that someone might register a wakeup notifier in the future for some reason other than actually supporting wakeup (perhaps as an informational thing, or as as part of some change to general lifecycle event tracking). I'm not sure it's currently worth adding an explicit flag that users need to set, but maybe at least some comments around qemu_register_wakeup_notifier() noting the potential side-effects of doing such a thing would be warranted.

Noted. I'll add a disclaimer in qemu_register_wakeup_notifier to inform that the presence/absence of a notifier is being used to determine whether an architecture supports wake up from suspend. That way we can at least inform what will happen if someone adds a new notifier without including the proper support.

Thanks,

Daniel

Quoted 71 lines
Quoted 70 lines
---
  arch_init.c             | 1 +
  include/sysemu/sysemu.h | 1 +
  qapi-schema.json        | 4 +++-
  vl.c                    | 5 +++++
  4 files changed, 10 insertions(+), 1 deletion(-)
arch_init.c +1 -0
index a0b8ed6167..9c5c519d9d 100644
@@ -109,6 +109,7 @@ TargetInfo *qmp_query_target(Error **errp)
      TargetInfo *info = g_malloc0(sizeof(*info));
 
      info->arch = g_strdup(TARGET_NAME);
+    info->wakeup_suspend_support = !qemu_wakeup_notifier_is_empty();
 
      return info;
  }
include/sysemu/sysemu.h +1 -0
index 31612caf10..b15374e0b8 100644
@@ -69,6 +69,7 @@ typedef enum WakeupReason {
  void qemu_system_reset_request(ShutdownCause reason);
  void qemu_system_suspend_request(void);
  void qemu_register_suspend_notifier(Notifier *notifier);
+bool qemu_wakeup_notifier_is_empty(void);
  void qemu_system_wakeup_request(WakeupReason reason);
  void qemu_system_wakeup_enable(WakeupReason reason, bool enabled);
  void qemu_register_wakeup_notifier(Notifier *notifier);
qapi-schema.json +3 -1
index 5c06745c79..2f1c08fde7 100644
@@ -2388,11 +2388,13 @@
  # Information describing the QEMU target.
  #
  # @arch: the target architecture (eg "x86_64", "i386", etc)
+# @wakeup-suspend-support: true if the target supports wake up from
+#                          suspend (since 2.12)
  #
  # Since: 1.2.0
  ##
  { 'struct': 'TargetInfo',
-  'data': { 'arch': 'str' } }
+  'data': { 'arch': 'str', 'wakeup-suspend-support': 'bool' } }
 
  ##
  # @query-target:
vl.c +5 -0
index d3a5c5d021..871c1f9bd1 100644
@@ -1844,6 +1844,11 @@ void qemu_register_wakeup_notifier(Notifier *notifier)
      notifier_list_add(&wakeup_notifiers, notifier);
  }
 
+bool qemu_wakeup_notifier_is_empty(void)
+{
+    return QLIST_EMPTY(&wakeup_notifiers.notifiers);
+}
+
  void qemu_system_killed(int signal, pid_t pid)
  {
      shutdown_signal = signal;
Signature · 1 line
2.13.6
#4 lore raw

PATCH v3 2/2 qga: update guest-suspend-ram and guest-suspend-hybrid descriptions

In reply to Daniel Henrique Barboza

This patch updates the descriptions of 'guest-suspend-ram' and 'guest-suspend-hybrid' to mention that both commands relies now on the existence of 'system_wakeup' and also on the proper support for wake up from suspend, retrieved by the 'wakeup-suspend-support' attribute of the 'query-target' QMP command.

---
 qga/qapi-schema.json | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
qga/qapi-schema.json +10 -4
index 17884c7c70..e3fb8adfce 100644
@@ -566,8 +566,11 @@
 # package installed in the guest.
 #
 # IMPORTANT: guest-suspend-ram requires QEMU to support the 'system_wakeup'
-# command.  Thus, it's *required* to query QEMU for the presence of the
-# 'system_wakeup' command before issuing guest-suspend-ram.
+# command and the guest to support wake up from suspend. Thus, it's
+# *required* to query QEMU for the presence of the 'system_wakeup' command
+# and to verify that wake up from suspend is enabled by checking the
+# 'wakeup-suspend-support' flag of 'query-target' QMP command, before issuing
+# guest-suspend-ram.
 #
 # This command does NOT return a response on success. There are two options
 # to check for success:
@@ -593,8 +596,11 @@
 # This command requires the pm-utils package to be installed in the guest.
 #
 # IMPORTANT: guest-suspend-hybrid requires QEMU to support the 'system_wakeup'
-# command.  Thus, it's *required* to query QEMU for the presence of the
-# 'system_wakeup' command before issuing guest-suspend-hybrid.
+# command and the guest to support wake up from suspend. Thus, it's
+# *required* to query QEMU for the presence of the 'system_wakeup' command
+# and to verify that wake up from suspend is enabled by checking the
+# 'wakeup-suspend-support' flag of 'query-target' QMP command, before issuing
+# guest-suspend-hybrid.
 #
 # This command does NOT return a response on success. There are two options
 # to check for success:
Signature · 1 line
2.13.6
Reviewed-by on v3 2/2
#5 lore raw

Re: [Qemu-devel] [PATCH v3 2/2] qga: update guest-suspend-ram and guest-suspend-hybrid descriptions

Quoting Daniel Henrique Barboza (2018-01-03 05:54:55)

Quoted 7 lines

This patch updates the descriptions of 'guest-suspend-ram' and 'guest-suspend-hybrid' to mention that both commands relies now on the existence of 'system_wakeup' and also on the proper support for wake up from suspend, retrieved by the 'wakeup-suspend-support' attribute of the 'query-target' QMP command.

Quoted 39 lines
---
 qga/qapi-schema.json | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
qga/qapi-schema.json +10 -4
index 17884c7c70..e3fb8adfce 100644
@@ -566,8 +566,11 @@
 # package installed in the guest.
 #
 # IMPORTANT: guest-suspend-ram requires QEMU to support the 'system_wakeup'
-# command.  Thus, it's *required* to query QEMU for the presence of the
-# 'system_wakeup' command before issuing guest-suspend-ram.
+# command and the guest to support wake up from suspend. Thus, it's
+# *required* to query QEMU for the presence of the 'system_wakeup' command
+# and to verify that wake up from suspend is enabled by checking the
+# 'wakeup-suspend-support' flag of 'query-target' QMP command, before issuing
+# guest-suspend-ram.
 #
 # This command does NOT return a response on success. There are two options
 # to check for success:
@@ -593,8 +596,11 @@
 # This command requires the pm-utils package to be installed in the guest.
 #
 # IMPORTANT: guest-suspend-hybrid requires QEMU to support the 'system_wakeup'
-# command.  Thus, it's *required* to query QEMU for the presence of the
-# 'system_wakeup' command before issuing guest-suspend-hybrid.
+# command and the guest to support wake up from suspend. Thus, it's
+# *required* to query QEMU for the presence of the 'system_wakeup' command
+# and to verify that wake up from suspend is enabled by checking the
+# 'wakeup-suspend-support' flag of 'query-target' QMP command, before issuing
+# guest-suspend-hybrid.
 #
 # This command does NOT return a response on success. There are two options
 # to check for success:
Signature · 1 line
2.13.6