Skip to contentSkip to conversation

ath10: Add support for Ubiquiti-branded QCA988X

PATCH Superseded Tobias Schramm 3 participants 7 messages Jan 24, 2018 – Jan 25, 2018

Subsystems (2)

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

cover ath10: Add support for Ubiquiti-branded QCA988X

A lot of more modern Ubiquiti AirMAX wireless devices contain a rebranded QCA988X with changed PCI vendor and device id.
This patch adds support for those chips by treating them as QCA988X rev2 radios.

Tobias Schramm (2):
pci: Add vendor id of Ubiquiti Networks
ath10k: Add support for Uiquiti rebranded QCA988X v2

 drivers/net/wireless/ath/ath10k/core.c | 24 ++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/hw.h   |  1 +
 drivers/net/wireless/ath/ath10k/pci.c  |  4 ++++
 include/linux/pci_ids.h                |  2 ++
 4 files changed, 31 insertions(+)
Signature · 7 lines
2.16.0


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#1 lore raw

PATCH 1/2 pci: Add vendor id of Ubiquiti Networks

---
 include/linux/pci_ids.h | 2 ++
 1 file changed, 2 insertions(+)
include/linux/pci_ids.h +2 -0
index ab20dc5db423..6b01ac1e9bce 100644
@@ -149,6 +149,8 @@
 #define PCI_VENDOR_ID_DYNALINK		0x0675
 #define PCI_DEVICE_ID_DYNALINK_IS64PH	0x1702
 
+#define PCI_VENDOR_ID_UBNT		0x0777
+
 #define PCI_VENDOR_ID_BERKOM			0x0871
 #define PCI_DEVICE_ID_BERKOM_A1T		0xffa1
 #define PCI_DEVICE_ID_BERKOM_T_CONCEPT		0xffa2
Signature · 7 lines
2.16.0


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#2 lore raw

PATCH 2/2 ath10k: Add support for Uiquiti rebranded QCA988X v2

In reply to Tobias Schramm

Some modern Ubiquiti devices contain a rebranded QCA988X rev2 with a custom Ubiquiti vendor and device id. This patch adds support for those devices, treating them as a QCA988X v2.

---
 drivers/net/wireless/ath/ath10k/core.c | 24 ++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/hw.h   |  1 +
 drivers/net/wireless/ath/ath10k/pci.c  |  4 ++++
 3 files changed, 29 insertions(+)
drivers/net/wireless/ath/ath10k/core.c +24 -0
index b29fdbd21ead..9fb38f2c1d6e 100644
@@ -52,6 +52,30 @@ MODULE_PARM_DESC(cryptmode, "Crypto mode: 0-hardware, 1-software");
 MODULE_PARM_DESC(rawmode, "Use raw 802.11 frame datapath");
 
 static const struct ath10k_hw_params ath10k_hw_params_list[] = {
+	{
+		.id = QCA988X_HW_2_0_VERSION,
+		.dev_id = QCA988X_2_0_DEVICE_ID_UBNT,
+		.name = "qca988x hw2.0",
+		.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
+		.uart_pin = 7,
+		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
+		.otp_exe_param = 0,
+		.channel_counters_freq_hz = 88000,
+		.max_probe_resp_desc_thres = 0,
+		.cal_data_len = 2116,
+		.fw = {
+			.dir = QCA988X_HW_2_0_FW_DIR,
+			.board = QCA988X_HW_2_0_BOARD_DATA_FILE,
+			.board_size = QCA988X_BOARD_DATA_SZ,
+			.board_ext_size = QCA988X_BOARD_EXT_DATA_SZ,
+		},
+		.hw_ops = &qca988x_ops,
+		.decap_align_bytes = 4,
+		.spectral_bin_discard = 0,
+		.vht160_mcs_rx_highest = 0,
+		.vht160_mcs_tx_highest = 0,
+		.n_cipher_suites = 8,
+	},
 	{
 		.id = QCA988X_HW_2_0_VERSION,
 		.dev_id = QCA988X_2_0_DEVICE_ID,
drivers/net/wireless/ath/ath10k/hw.h +1 -0
index 05f26e5858ad..5ae3b56acc19 100644
@@ -22,6 +22,7 @@
 
 #define ATH10K_FW_DIR			"ath10k"
 
+#define QCA988X_2_0_DEVICE_ID_UBNT   (0x11ac)
 #define QCA988X_2_0_DEVICE_ID   (0x003c)
 #define QCA6164_2_1_DEVICE_ID   (0x0041)
 #define QCA6174_2_1_DEVICE_ID   (0x003e)
drivers/net/wireless/ath/ath10k/pci.c +4 -0
index ffea348b2190..ccac6740795d 100644
@@ -52,6 +52,7 @@ MODULE_PARM_DESC(reset_mode, "0: auto, 1: warm only (default: 0)");
 #define ATH10K_PCI_NUM_WARM_RESET_ATTEMPTS 3
 
 static const struct pci_device_id ath10k_pci_id_table[] = {
+	{ PCI_VDEVICE(UBNT, QCA988X_2_0_DEVICE_ID_UBNT) }, /* PCI-E QCA988X V2 (Ubiquiti branded) */
 	{ PCI_VDEVICE(ATHEROS, QCA988X_2_0_DEVICE_ID) }, /* PCI-E QCA988X V2 */
 	{ PCI_VDEVICE(ATHEROS, QCA6164_2_1_DEVICE_ID) }, /* PCI-E QCA6164 V2.1 */
 	{ PCI_VDEVICE(ATHEROS, QCA6174_2_1_DEVICE_ID) }, /* PCI-E QCA6174 V2.1 */
@@ -68,6 +69,7 @@ static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = {
 	 * hacks. ath10k doesn't have them and these devices crash horribly
 	 * because of that.
 	 */
+	{ QCA988X_2_0_DEVICE_ID_UBNT, QCA988X_HW_2_0_CHIP_ID_REV },
 	{ QCA988X_2_0_DEVICE_ID, QCA988X_HW_2_0_CHIP_ID_REV },
 
 	{ QCA6164_2_1_DEVICE_ID, QCA6174_HW_2_1_CHIP_ID_REV },
@@ -1977,6 +1979,7 @@ static int ath10k_pci_get_num_banks(struct ath10k *ar)
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 
 	switch (ar_pci->pdev->device) {
+	case QCA988X_2_0_DEVICE_ID_UBNT:
 	case QCA988X_2_0_DEVICE_ID:
 	case QCA99X0_2_0_DEVICE_ID:
 	case QCA9888_2_0_DEVICE_ID:
@@ -3208,6 +3211,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	u32 (*targ_cpu_to_ce_addr)(struct ath10k *ar, u32 addr);
 
 	switch (pci_dev->device) {
+	case QCA988X_2_0_DEVICE_ID_UBNT:
 	case QCA988X_2_0_DEVICE_ID:
 		hw_rev = ATH10K_HW_QCA988X;
 		pci_ps = false;
Signature · 7 lines
2.16.0


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#3 lore raw
In reply to Tobias Schramm
Quoted 8 lines · Tobias Schramm

A lot of more modern Ubiquiti AirMAX wireless devices contain a rebranded QCA988X with changed PCI vendor and device id.
This patch adds support for those chips by treating them as QCA988X rev2 radios.

Tobias Schramm (2):
pci: Add vendor id of Ubiquiti Networks
ath10k: Add support for Uiquiti rebranded QCA988X v2

Please resend (as v2) and include more lists/people:

[email protected]
[email protected]
Bjorn Helgaas <[email protected]>
[email protected]

Signature · 5 lines
Kalle Valo
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#4 lore raw

ubiquiti did not change the pci vendor and device id. just the subvendor and subdevice id is individual and this is not unusual for most vendors all ubiquiti cards have 0x0777
and yes i know all these airmax devices and have them and running ath10k on it without any issue

Am 25.01.2018 um 06:25 schrieb Kalle Valo:

Quoted 17 lines
Quoted 8 lines · Tobias Schramm

A lot of more modern Ubiquiti AirMAX wireless devices contain a rebranded QCA988X with changed PCI vendor and device id.
This patch adds support for those chips by treating them as QCA988X rev2 radios.

Tobias Schramm (2):
pci: Add vendor id of Ubiquiti Networks
ath10k: Add support for Uiquiti rebranded QCA988X v2

Please resend (as v2) and include more lists/people:

[email protected]
[email protected]
Bjorn Helgaas <[email protected]>
[email protected]

Signature · 17 lines
Mit freundlichen Grüssen / Regards

Sebastian Gottschall / CTO

NewMedia-NET GmbH - DD-WRT
Firmensitz:  Stubenwaldallee 21a, 64625 Bensheim
Registergericht: Amtsgericht Darmstadt, HRB 25473
Geschäftsführer: Peter Steinhäuser, Christian Scheele
http://www.dd-wrt.com
email: [email protected]
Tel.: +496251-582650 / Fax: +496251-5826565


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#5 lore raw

Yes, they did in fact do that for some devices like the UniFi AC LITE. But at least one AirMAX device - namely the Ubiquiti NanoStation AC - has the PCI vendor id 0777 and the pci device id 11ac:

root@OpenWrt:~# lspci -nn
00:00.0 Network controller [0280]: Ubiquiti Networks, Inc. Device [0777:11ac]

I'm not sure why exactly the did that but I got confirmation from another OpenWrt developer that Ubiquiti is doing the same on the Litebeam 5AC.

2018-01-25 10:34 GMT+01:00 Sebastian Gottschall <[email protected]>:

Quoted 41 lines

ubiquiti did not change the pci vendor and device id. just the subvendor and subdevice id is individual and this is not unusual for most vendors all ubiquiti cards have 0x0777
and yes i know all these airmax devices and have them and running ath10k on it without any issue

Am 25.01.2018 um 06:25 schrieb Kalle Valo:

Quoted 12 lines
Quoted 8 lines · Tobias Schramm

A lot of more modern Ubiquiti AirMAX wireless devices contain a rebranded QCA988X with changed PCI vendor and device id.
This patch adds support for those chips by treating them as QCA988X rev2 radios.

Tobias Schramm (2):
pci: Add vendor id of Ubiquiti Networks
ath10k: Add support for Uiquiti rebranded QCA988X v2

Quoted 7 lines

Please resend (as v2) and include more lists/people:

[email protected]
[email protected]
Bjorn Helgaas <[email protected]>
[email protected]

--
Mit freundlichen Grüssen / Regards

Sebastian Gottschall / CTO

NewMedia-NET GmbH - DD-WRT
Firmensitz: Stubenwaldallee 21a, 64625 Bensheim
Registergericht: Amtsgericht Darmstadt, HRB 25473 Geschäftsführer: Peter Steinhäuser, Christian Scheele
http://www.dd-wrt.com
email: [email protected]
Tel.: +496251-582650 / Fax: +496251-5826565

Quoted 4 lines

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#6 lore raw

Am 25.01.2018 um 11:34 schrieb Tobias Schramm:

Quoted 10 lines

Yes, they did in fact do that for some devices like the UniFi AC LITE. But at least one AirMAX device - namely the Ubiquiti NanoStation AC - has the PCI vendor id 0777 and the pci device id 11ac:

root@OpenWrt:~# lspci -nn
00:00.0 Network controller [0280]: Ubiquiti Networks, Inc. Device [0777:11ac]

I'm not sure why exactly the did that but I got confirmation from another OpenWrt developer that Ubiquiti is doing the same on the Litebeam 5AC.

that must be really new because i have such a device without such hacks.

Quoted 44 lines

2018-01-25 10:34 GMT+01:00 Sebastian Gottschall <[email protected]>:

Quoted 42 lines

ubiquiti did not change the pci vendor and device id. just the subvendor and subdevice id is individual and this is not unusual for most vendors all ubiquiti cards have 0x0777
and yes i know all these airmax devices and have them and running ath10k on it without any issue

Am 25.01.2018 um 06:25 schrieb Kalle Valo:

Quoted 10 lines
Quoted 8 lines · Tobias Schramm

A lot of more modern Ubiquiti AirMAX wireless devices contain a rebranded QCA988X with changed PCI vendor and device id.
This patch adds support for those chips by treating them as QCA988X rev2 radios.

Tobias Schramm (2):
pci: Add vendor id of Ubiquiti Networks
ath10k: Add support for Uiquiti rebranded QCA988X v2

Quoted 7 lines

Please resend (as v2) and include more lists/people:

[email protected]
[email protected]
Bjorn Helgaas <[email protected]>
[email protected]

--
Mit freundlichen Grüssen / Regards

Sebastian Gottschall / CTO

NewMedia-NET GmbH - DD-WRT
Firmensitz: Stubenwaldallee 21a, 64625 Bensheim
Registergericht: Amtsgericht Darmstadt, HRB 25473 Geschäftsführer: Peter Steinhäuser, Christian Scheele
http://www.dd-wrt.com
email: [email protected]
Tel.: +496251-582650 / Fax: +496251-5826565

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

Signature · 17 lines
Mit freundlichen Grüssen / Regards

Sebastian Gottschall / CTO

NewMedia-NET GmbH - DD-WRT
Firmensitz:  Stubenwaldallee 21a, 64625 Bensheim
Registergericht: Amtsgericht Darmstadt, HRB 25473
Geschäftsführer: Peter Steinhäuser, Christian Scheele
http://www.dd-wrt.com
email: [email protected]
Tel.: +496251-582650 / Fax: +496251-5826565


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k