ath10: Add support for Ubiquiti-branded QCA988X
Subsystems (2)
cover ath10: Add support for Ubiquiti-branded QCA988X
A lot of more modern Ubiquiti AirMAX wireless devices contain a rebranded QCA988X with changed PCI vendor and device id.
This patch adds support for those chips by treating them as QCA988X rev2 radios.
Tobias Schramm (2):
pci: Add vendor id of Ubiquiti Networks
ath10k: Add support for Uiquiti rebranded QCA988X v2
drivers/net/wireless/ath/ath10k/core.c | 24 ++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/hw.h | 1 + drivers/net/wireless/ath/ath10k/pci.c | 4 ++++ include/linux/pci_ids.h | 2 ++ 4 files changed, 31 insertions(+)
Signature · 7 lines
2.16.0 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
PATCH 1/2 pci: Add vendor id of Ubiquiti Networks
--- include/linux/pci_ids.h | 2 ++ 1 file changed, 2 insertions(+)
include/linux/pci_ids.h +2 -0
@@ -149,6 +149,8 @@#define PCI_VENDOR_ID_DYNALINK 0x0675#define PCI_DEVICE_ID_DYNALINK_IS64PH 0x1702 +#define PCI_VENDOR_ID_UBNT 0x0777 +#define PCI_VENDOR_ID_BERKOM 0x0871#define PCI_DEVICE_ID_BERKOM_A1T 0xffa1#define PCI_DEVICE_ID_BERKOM_T_CONCEPT 0xffa2
Signature · 7 lines
2.16.0 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
PATCH 2/2 ath10k: Add support for Uiquiti rebranded QCA988X v2
In reply to Tobias SchrammSome modern Ubiquiti devices contain a rebranded QCA988X rev2 with a custom Ubiquiti vendor and device id. This patch adds support for those devices, treating them as a QCA988X v2.
--- drivers/net/wireless/ath/ath10k/core.c | 24 ++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/hw.h | 1 + drivers/net/wireless/ath/ath10k/pci.c | 4 ++++ 3 files changed, 29 insertions(+)
drivers/net/wireless/ath/ath10k/core.c +24 -0
@@ -52,6 +52,30 @@ MODULE_PARM_DESC(cryptmode, "Crypto mode: 0-hardware, 1-software");MODULE_PARM_DESC (rawmode,"Use raw 802.11 frame datapath" );static const struct ath10k_hw_params ath10k_hw_params_list[] = { + { + .id =QCA988X_HW_2_0_VERSION , + .dev_id =QCA988X_2_0_DEVICE_ID_UBNT , + .name ="qca988x hw2.0" , + .patch_load_addr =QCA988X_HW_2_0_PATCH_LOAD_ADDR , + .uart_pin =7 , + .cc_wraparound_type =ATH10K_HW_CC_WRAP_SHIFTED_ALL , + .otp_exe_param =0 , + .channel_counters_freq_hz =88000 , + .max_probe_resp_desc_thres =0 , + .cal_data_len =2116 , + .fw = { + .dir =QCA988X_HW_2_0_FW_DIR , + .board =QCA988X_HW_2_0_BOARD_DATA_FILE , + .board_size =QCA988X_BOARD_DATA_SZ , + .board_ext_size =QCA988X_BOARD_EXT_DATA_SZ , + }, + .hw_ops = &qca988x_ops, + .decap_align_bytes =4 , + .spectral_bin_discard =0 , + .vht160_mcs_rx_highest =0 , + .vht160_mcs_tx_highest =0 , + .n_cipher_suites =8 , + }, { .id =QCA988X_HW_2_0_VERSION , .dev_id =QCA988X_2_0_DEVICE_ID ,
drivers/net/wireless/ath/ath10k/hw.h +1 -0
@@ -22,6 +22,7 @@#define ATH10K_FW_DIR "ath10k" +#define QCA988X_2_0_DEVICE_ID_UBNT (0x11ac)#define QCA988X_2_0_DEVICE_ID (0x003c)#define QCA6164_2_1_DEVICE_ID (0x0041)#define QCA6174_2_1_DEVICE_ID (0x003e)
drivers/net/wireless/ath/ath10k/pci.c +4 -0
@@ -52,6 +52,7 @@ MODULE_PARM_DESC(reset_mode, "0: auto, 1: warm only (default: 0)");#define ATH10K_PCI_NUM_WARM_RESET_ATTEMPTS 3static const struct pci_device_id ath10k_pci_id_table[] = { + {PCI_VDEVICE (UBNT ,QCA988X_2_0_DEVICE_ID_UBNT ) },/* PCI-E QCA988X V2 (Ubiquiti branded) */ {PCI_VDEVICE (ATHEROS ,QCA988X_2_0_DEVICE_ID ) },/* PCI-E QCA988X V2 */ {PCI_VDEVICE (ATHEROS ,QCA6164_2_1_DEVICE_ID ) },/* PCI-E QCA6164 V2.1 */ {PCI_VDEVICE (ATHEROS ,QCA6174_2_1_DEVICE_ID ) },/* PCI-E QCA6174 V2.1 */
@@ -68,6 +69,7 @@ static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = {* hacks. ath10k doesn't have them and these devices crash horribly * because of that. */ + { QCA988X_2_0_DEVICE_ID_UBNT, QCA988X_HW_2_0_CHIP_ID_REV }, { QCA988X_2_0_DEVICE_ID, QCA988X_HW_2_0_CHIP_ID_REV }, { QCA6164_2_1_DEVICE_ID, QCA6174_HW_2_1_CHIP_ID_REV },
@@ -1977,6 +1979,7 @@ static int ath10k_pci_get_num_banks(struct ath10k *ar)struct ath10k_pci *ar_pci =ath10k_pci_priv (ar);switch (ar_pci->pdev->device) { +case QCA988X_2_0_DEVICE_ID_UBNT :case QCA988X_2_0_DEVICE_ID :case QCA99X0_2_0_DEVICE_ID :case QCA9888_2_0_DEVICE_ID :
@@ -3208,6 +3211,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,u32 (*targ_cpu_to_ce_addr)(struct ath10k *ar,u32 addr);switch (pci_dev->device) { +case QCA988X_2_0_DEVICE_ID_UBNT :case QCA988X_2_0_DEVICE_ID : hw_rev =ATH10K_HW_QCA988X ; pci_ps = false;
Signature · 7 lines
2.16.0 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 8 lines · Tobias Schramm
A lot of more modern Ubiquiti AirMAX wireless devices contain a rebranded QCA988X with changed PCI vendor and device id.
This patch adds support for those chips by treating them as QCA988X rev2 radios.Tobias Schramm (2):
pci: Add vendor id of Ubiquiti Networks
ath10k: Add support for Uiquiti rebranded QCA988X v2
Please resend (as v2) and include more lists/people:
[email protected]
[email protected]
Bjorn Helgaas <[email protected]>
[email protected]
Signature · 5 lines
Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
ubiquiti did not change the pci vendor and device id. just the subvendor and subdevice id is individual and this is not unusual for most vendors all ubiquiti cards have 0x0777
and yes i know all these airmax devices and have them and running ath10k on it without any issue
Am 25.01.2018 um 06:25 schrieb Kalle Valo:
Quoted 17 lines
Quoted 8 lines · Tobias Schramm
A lot of more modern Ubiquiti AirMAX wireless devices contain a rebranded QCA988X with changed PCI vendor and device id.
This patch adds support for those chips by treating them as QCA988X rev2 radios.Tobias Schramm (2):
pci: Add vendor id of Ubiquiti Networks
ath10k: Add support for Uiquiti rebranded QCA988X v2Please resend (as v2) and include more lists/people:
[email protected]
[email protected]
Bjorn Helgaas <[email protected]>
[email protected]
Signature · 17 lines
Mit freundlichen Grüssen / Regards Sebastian Gottschall / CTO NewMedia-NET GmbH - DD-WRT Firmensitz: Stubenwaldallee 21a, 64625 Bensheim Registergericht: Amtsgericht Darmstadt, HRB 25473 Geschäftsführer: Peter Steinhäuser, Christian Scheele http://www.dd-wrt.com email: [email protected] Tel.: +496251-582650 / Fax: +496251-5826565 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Yes, they did in fact do that for some devices like the UniFi AC LITE. But at least one AirMAX device - namely the Ubiquiti NanoStation AC - has the PCI vendor id 0777 and the pci device id 11ac:
root@OpenWrt:~# lspci -nn 00:00.0 Network controller [0280]: Ubiquiti Networks, Inc. Device [0777:11ac]
I'm not sure why exactly the did that but I got confirmation from another OpenWrt developer that Ubiquiti is doing the same on the Litebeam 5AC.
2018-01-25 10:34 GMT+01:00 Sebastian Gottschall <[email protected]>:
Quoted 41 lines
ubiquiti did not change the pci vendor and device id. just the subvendor and subdevice id is individual and this is not unusual for most vendors all ubiquiti cards have
0x0777
and yes i know all these airmax devices and have them and running ath10k on it without any issueAm 25.01.2018 um 06:25 schrieb Kalle Valo:
Quoted 12 lines
Quoted 8 lines · Tobias Schramm
A lot of more modern Ubiquiti AirMAX wireless devices contain a rebranded QCA988X with changed PCI vendor and device id.
This patch adds support for those chips by treating them as QCA988X rev2 radios.Tobias Schramm (2):
pci: Add vendor id of Ubiquiti Networks
ath10k: Add support for Uiquiti rebranded QCA988X v2Quoted 7 lines
Please resend (as v2) and include more lists/people:
[email protected]
[email protected]
Bjorn Helgaas <[email protected]>
[email protected]--
Mit freundlichen Grüssen / RegardsSebastian Gottschall / CTO
NewMedia-NET GmbH - DD-WRT
Firmensitz: Stubenwaldallee 21a, 64625 Bensheim
Registergericht: Amtsgericht Darmstadt, HRB 25473 Geschäftsführer: Peter Steinhäuser, Christian Scheele
http://www.dd-wrt.com
email: [email protected]
Tel.: +496251-582650 / Fax: +496251-5826565
Quoted 4 lines
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Am 25.01.2018 um 11:34 schrieb Tobias Schramm:
Quoted 10 lines
Yes, they did in fact do that for some devices like the UniFi AC LITE. But at least one AirMAX device - namely the Ubiquiti NanoStation AC - has the PCI vendor id 0777 and the pci device id 11ac:
root@OpenWrt:~# lspci -nn 00:00.0 Network controller [0280]: Ubiquiti Networks, Inc. Device [0777:11ac]I'm not sure why exactly the did that but I got confirmation from another OpenWrt developer that Ubiquiti is doing the same on the Litebeam 5AC.
that must be really new because i have such a device without such hacks.
Quoted 44 lines
2018-01-25 10:34 GMT+01:00 Sebastian Gottschall <[email protected]>:
Quoted 42 lines
ubiquiti did not change the pci vendor and device id. just the subvendor and subdevice id is individual and this is not unusual for most vendors all ubiquiti cards have
0x0777
and yes i know all these airmax devices and have them and running ath10k on it without any issueAm 25.01.2018 um 06:25 schrieb Kalle Valo:
Quoted 10 lines
Quoted 8 lines · Tobias Schramm
A lot of more modern Ubiquiti AirMAX wireless devices contain a rebranded QCA988X with changed PCI vendor and device id.
This patch adds support for those chips by treating them as QCA988X rev2 radios.Tobias Schramm (2):
pci: Add vendor id of Ubiquiti Networks
ath10k: Add support for Uiquiti rebranded QCA988X v2Quoted 7 lines
Please resend (as v2) and include more lists/people:
[email protected]
[email protected]
Bjorn Helgaas <[email protected]>
[email protected]--
Mit freundlichen Grüssen / RegardsSebastian Gottschall / CTO
NewMedia-NET GmbH - DD-WRT
Firmensitz: Stubenwaldallee 21a, 64625 Bensheim
Registergericht: Amtsgericht Darmstadt, HRB 25473 Geschäftsführer: Peter Steinhäuser, Christian Scheele
http://www.dd-wrt.com
email: [email protected]
Tel.: +496251-582650 / Fax: +496251-5826565_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Signature · 17 lines
Mit freundlichen Grüssen / Regards Sebastian Gottschall / CTO NewMedia-NET GmbH - DD-WRT Firmensitz: Stubenwaldallee 21a, 64625 Bensheim Registergericht: Amtsgericht Darmstadt, HRB 25473 Geschäftsführer: Peter Steinhäuser, Christian Scheele http://www.dd-wrt.com email: [email protected] Tel.: +496251-582650 / Fax: +496251-5826565 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k