ARM: dts: imx27-eukrea-mbimxsd27-baseboard: Pass missing unit address

From: Fabio Estevam <[email protected]>

ads7846 is connected to SPI chip select 0, so pass the unit address accordingly to fix the following build warning with W=1:

arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dtb: Warning (unit_address_vs_reg): Node /soc/aipi at 10000000/cspi at 1000e000/ads7846 has a reg or ranges property, but no unit name

---
 arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index f565357..15145e7 100644
@@ -84,7 +84,7 @@
 	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	ads7846 {
+	ads7846 at 0 {
 		compatible = "ti,ads7846";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_touch>;

2.7.4

From: Fabio Estevam <[email protected]>

clock node should not have a 'simple-bus' compatible string, so remove it in order to fix the following build warning with W=1:

arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dtb: Warning (simple_bus_reg): Node /clocks/osc26m missing or empty reg/ranges property

---
 arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi | 1 -
 1 file changed, 1 deletion(-)

index 2cf896c..7c75147 100644
@@ -23,7 +23,6 @@
 	clocks {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "simple-bus";
 
 		clk14745600: clock at 0 {
 			#clock-cells = <0>;

2.7.4

Applied, thanks.