Skip to contentSkip to conversation

tests/migration: Add source to PC boot block

PATCH Superseded Dr. David Alan Gilbert (git) 2 participants 3 messages Jan 31, 2018 – Feb 5, 2018

v1 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 tests/migration: Add source to PC boot block

From: "Dr. David Alan Gilbert" <[email protected]>

The boot block used in the migration test is currently only shipped as a hex (with the source in the git commit message), change this to actually include the source.

A makefile rule is added, but the expectation is that the generated hex is shipped as well as the .s, so that there's no requirement to have just the right assembler etc.

---
 tests/Makefile.include              | 18 ++++++++
 tests/migration-test.c              | 46 +------------------
 tests/migration/x86-a-b-bootblock.h | 52 +++++++++++++++++++++
 tests/migration/x86-a-b-bootblock.s | 92 +++++++++++++++++++++++++++++++++++++
 4 files changed, 163 insertions(+), 45 deletions(-)
 create mode 100644 tests/migration/x86-a-b-bootblock.h
 create mode 100644 tests/migration/x86-a-b-bootblock.s
tests/Makefile.include +18 -0
index 851aafe9d1..2a0889479c 100644
@@ -831,6 +831,24 @@ tests/migration/initrd-stress.img: tests/migration/stress$(EXESUF)
 	rm $(INITRD_WORK_DIR)/init
 	rmdir $(INITRD_WORK_DIR)
 
+ASM_WORK_DIR=tests/asm-temp
+$(SRC_PATH)/tests/migration/x86-a-b-bootblock.h: $(SRC_PATH)/tests/migration/x86-a-b-bootblock.s
+	mkdir $(ASM_WORK_DIR)
+	as --32 -march=i486 $< -o $(ASM_WORK_DIR).o
+	objcopy -O binary $(ASM_WORK_DIR).o $(ASM_WORK_DIR).boot
+	dd if=$(ASM_WORK_DIR).boot of=$(ASM_WORK_DIR).bootsect bs=256 count=2 skip=124
+	xxd -i $(ASM_WORK_DIR).bootsect | \
+            sed -e 's/tests_asm_temp_bootsect/bootsect/' -e 's/.*int.*//' > $(ASM_WORK_DIR).hex
+	echo -e "/* This file is automatically generated from\n" \
+             " * tests/migration/x86-a-b-bootblock.s, edit that and then\n" \
+             " * make tests/migration/x86-a-b-bootblock.h to update,\n" \
+             " * and then remember to send both in your patch submission.\n" \
+             " */\n" | cat - $(ASM_WORK_DIR).hex > $@
+	rm $(ASM_WORK_DIR).hex $(ASM_WORK_DIR).bootsect $(ASM_WORK_DIR).boot
+	rm $(ASM_WORK_DIR).o
+	rmdir $(ASM_WORK_DIR)
+
+
 ifeq ($(CONFIG_POSIX),y)
 LIBS += -lutil
 endif
tests/migration-test.c +1 -45

52 lines not on this page · raw message

tests/migration/x86-a-b-bootblock.h new file +52 -0

52 lines not on this page · raw message

tests/migration/x86-a-b-bootblock.s new file +92 -0

92 lines not on this page · raw message

Signature · 1 line
2.14.3
#1 lore raw
Quoted 36 lines · Dr. David Alan Gilbert (git)

From: "Dr. David Alan Gilbert" <[email protected]>

The boot block used in the migration test is currently only shipped as a hex (with the source in the git commit message), change this to actually include the source.

A makefile rule is added, but the expectation is that the generated hex is shipped as well as the .s, so that there's no requirement to have just the right assembler etc.

---
 tests/Makefile.include              | 18 ++++++++
 tests/migration-test.c              | 46 +------------------
 tests/migration/x86-a-b-bootblock.h | 52 +++++++++++++++++++++
 tests/migration/x86-a-b-bootblock.s | 92 +++++++++++++++++++++++++++++++++++++
 4 files changed, 163 insertions(+), 45 deletions(-)
 create mode 100644 tests/migration/x86-a-b-bootblock.h
 create mode 100644 tests/migration/x86-a-b-bootblock.s
tests/Makefile.include +8 -0
index 851aafe9d1..2a0889479c 100644
@@ -831,6 +831,24 @@ tests/migration/initrd-stress.img: tests/migration/stress$(EXESUF)
 	rm $(INITRD_WORK_DIR)/init
 	rmdir $(INITRD_WORK_DIR)
 
+ASM_WORK_DIR=tests/asm-temp
+$(SRC_PATH)/tests/migration/x86-a-b-bootblock.h: $(SRC_PATH)/tests/migration/x86-a-b-bootblock.s
+	mkdir $(ASM_WORK_DIR)
+	as --32 -march=i486 $< -o $(ASM_WORK_DIR).o
+	objcopy -O binary $(ASM_WORK_DIR).o $(ASM_WORK_DIR).boot
+	dd if=$(ASM_WORK_DIR).boot of=$(ASM_WORK_DIR).bootsect bs=256 count=2 skip=124
+	xxd -i $(ASM_WORK_DIR).bootsect | \
+            sed -e 's/tests_asm_temp_bootsect/bootsect/' -e 's/.*int.*//' > $(ASM_WORK_DIR).hex

tests/Makefile.include tests/migration/initrd-stress.img: tests/migration/stress$(EXESUF) · line 851

Quoted 10 lines
tests/Makefile.include +10 -0
+	echo -e "/* This file is automatically generated from\n" \
+             " * tests/migration/x86-a-b-bootblock.s, edit that and then\n" \
+             " * make tests/migration/x86-a-b-bootblock.h to update,\n" \
+             " * and then remember to send both in your patch submission.\n" \
+             " */\n" | cat - $(ASM_WORK_DIR).hex > $@
+	rm $(ASM_WORK_DIR).hex $(ASM_WORK_DIR).bootsect $(ASM_WORK_DIR).boot
+	rm $(ASM_WORK_DIR).o
+	rmdir $(ASM_WORK_DIR)
+
+

Could we create a new Makefile.include under tests/migration/ and move the code above there? The code above is very large and can distract people working on tests/Makefile.include.

Quoted 66 lines
tests/Makefile.include +0 -0
 ifeq ($(CONFIG_POSIX),y)
 LIBS += -lutil
 endif
tests/migration-test.c +1 -45
index 799e24ebc6..7550fd8d56 100644
@@ -79,51 +79,7 @@ static const char *tmpfs;
 /* A simple PC boot sector that modifies memory (1-100MB) quickly
  * outputing a 'B' every so often if it's still running.
  */
-unsigned char bootsect[] = {
-  0xfa, 0x0f, 0x01, 0x16, 0x74, 0x7c, 0x66, 0xb8, 0x01, 0x00, 0x00, 0x00,
-  0x0f, 0x22, 0xc0, 0x66, 0xea, 0x20, 0x7c, 0x00, 0x00, 0x08, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe4, 0x92, 0x0c, 0x02,
-  0xe6, 0x92, 0xb8, 0x10, 0x00, 0x00, 0x00, 0x8e, 0xd8, 0x66, 0xb8, 0x41,
-  0x00, 0x66, 0xba, 0xf8, 0x03, 0xee, 0xb3, 0x00, 0xb8, 0x00, 0x00, 0x10,
-  0x00, 0xfe, 0x00, 0x05, 0x00, 0x10, 0x00, 0x00, 0x3d, 0x00, 0x00, 0x40,
-  0x06, 0x7c, 0xf2, 0xfe, 0xc3, 0x75, 0xe9, 0x66, 0xb8, 0x42, 0x00, 0x66,
-  0xba, 0xf8, 0x03, 0xee, 0xeb, 0xde, 0x66, 0x90, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x9a, 0xcf, 0x00,
-  0xff, 0xff, 0x00, 0x00, 0x00, 0x92, 0xcf, 0x00, 0x27, 0x00, 0x5c, 0x7c,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xaa
-};
+#include "tests/migration/x86-a-b-bootblock.h"
 
 static void init_bootfile_x86(const char *bootpath)
 {
tests/migration/x86-a-b-bootblock.h new file +0 -0
new file mode 100644
index 0000000000..e45c8dd5b3

tests/migration/x86-a-b-bootblock.h line 7

Quoted 7 lines
tests/migration/x86-a-b-bootblock.h new file +7 -0
@@ -0,0 +1,52 @@
+/* This file is automatically generated from
+  * tests/migration/x86-a-b-bootblock.s, edit that and then
+  * make tests/migration/x86-a-b-bootblock.h to update,
+  * and then remember to send both in your patch submission.
+  */
+
+unsigned char bootsect[] = {

Given that this is arch-dependent, I think it will be better to add "x86_" as prefix to this variable.

Quoted 144 lines
tests/migration/x86-a-b-bootblock.h new file +45 -0
+  0xfa, 0x0f, 0x01, 0x16, 0x74, 0x7c, 0x66, 0xb8, 0x01, 0x00, 0x00, 0x00,
+  0x0f, 0x22, 0xc0, 0x66, 0xea, 0x20, 0x7c, 0x00, 0x00, 0x08, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe4, 0x92, 0x0c, 0x02,
+  0xe6, 0x92, 0xb8, 0x10, 0x00, 0x00, 0x00, 0x8e, 0xd8, 0x66, 0xb8, 0x41,
+  0x00, 0x66, 0xba, 0xf8, 0x03, 0xee, 0xb3, 0x00, 0xb8, 0x00, 0x00, 0x10,
+  0x00, 0xfe, 0x00, 0x05, 0x00, 0x10, 0x00, 0x00, 0x3d, 0x00, 0x00, 0x40,
+  0x06, 0x7c, 0xf2, 0xfe, 0xc3, 0x75, 0xe9, 0x66, 0xb8, 0x42, 0x00, 0x66,
+  0xba, 0xf8, 0x03, 0xee, 0xeb, 0xde, 0x66, 0x90, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x9a, 0xcf, 0x00,
+  0xff, 0xff, 0x00, 0x00, 0x00, 0x92, 0xcf, 0x00, 0x27, 0x00, 0x5c, 0x7c,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xaa
+};
+
tests/migration/x86-a-b-bootblock.s new file +92 -0
new file mode 100644
index 0000000000..7f290014af
@@ -0,0 +1,92 @@
+# x86 bootblock used in migration test
+#  repeatedly increments the first byte of each page in a 100MB
+#  range.
+#  Outputs an initial 'A' on serial followed by repeated 'B's
+#
+# run   make tests/migration/x86-a-b-bootblock.h
+#   to regenerate the hex, and remember to include both the .h and .s
+#   in any patches.
+#
+# Copyright (c) 2016 Red Hat, Inc. and/or its affiliates
+# This work is licensed under the terms of the GNU GPL, version 2 or later.
+# See the COPYING file in the top-level directory.
+#
+# Author: [email protected]
+
+
+.code16
+.org 0x7c00
+        .file   "fill.s"
+        .text
+        .globl  start
+        .type   start, @function
+start:             # at 0x7c00 ?
+        cli
+        lgdt gdtdesc
+        mov $1,%eax
+        mov %eax,%cr0  # Protected mode enable
+        data32 ljmp $8,$0x7c20
+
+.org 0x7c20
+.code32
+        # A20 enable - not sure I actually need this
+        inb $0x92,%al
+        or  $2,%al
+        outb %al, $0x92
+
+        # set up DS for the whole of RAM (needed on KVM)
+        mov $16,%eax
+        mov %eax,%ds
+
+        mov $65,%ax
+        mov $0x3f8,%dx
+        outb %al,%dx
+
+        # bl keeps a counter so we limit the output speed
+        mov $0, %bl
+mainloop:
+        # Start from 1MB
+        mov $(1024*1024),%eax
+innerloop:
+        incb (%eax)
+        add $4096,%eax
+        cmp $(100*1024*1024),%eax
+        jl innerloop
+
+        inc %bl
+        jnz mainloop
+
+        mov $66,%ax
+        mov $0x3f8,%dx
+        outb %al,%dx
+
+        jmp mainloop
+
+        # GDT magic from old (GPLv2)  Grub startup.S
+        .p2align        2       /* force 4-byte alignment */
+gdt:
+        .word   0, 0
+        .byte   0, 0, 0, 0
+
+        /* -- code segment --
+         * base = 0x00000000, limit = 0xFFFFF (4 KiB Granularity), present
+         * type = 32bit code execute/read, DPL = 0
+         */
+        .word   0xFFFF, 0
+        .byte   0, 0x9A, 0xCF, 0
+
+        /* -- data segment --
+         * base = 0x00000000, limit 0xFFFFF (4 KiB Granularity), present
+         * type = 32 bit data read/write, DPL = 0
+         */
+        .word   0xFFFF, 0
+        .byte   0, 0x92, 0xCF, 0
+
+gdtdesc:
+        .word   0x27                    /* limit */
+        .long   gdt                     /* addr */
+
+/* I'm a bootable disk */
+.org 0x7dfe
+        .byte 0x55
+        .byte 0xAA
#2 lore raw
Quoted 45 lines · * Wei Huang ([email protected]) wrote:
Quoted 42 lines · Dr. David Alan Gilbert (git)

From: "Dr. David Alan Gilbert" <[email protected]>

The boot block used in the migration test is currently only shipped as a hex (with the source in the git commit message), change this to actually include the source.

A makefile rule is added, but the expectation is that the generated hex is shipped as well as the .s, so that there's no requirement to have just the right assembler etc.

---
 tests/Makefile.include              | 18 ++++++++
 tests/migration-test.c              | 46 +------------------
 tests/migration/x86-a-b-bootblock.h | 52 +++++++++++++++++++++
 tests/migration/x86-a-b-bootblock.s | 92 +++++++++++++++++++++++++++++++++++++
 4 files changed, 163 insertions(+), 45 deletions(-)
 create mode 100644 tests/migration/x86-a-b-bootblock.h
 create mode 100644 tests/migration/x86-a-b-bootblock.s
tests/Makefile.include +14 -0
index 851aafe9d1..2a0889479c 100644
@@ -831,6 +831,24 @@ tests/migration/initrd-stress.img: tests/migration/stress$(EXESUF)
 	rm $(INITRD_WORK_DIR)/init
 	rmdir $(INITRD_WORK_DIR)
 
+ASM_WORK_DIR=tests/asm-temp
+$(SRC_PATH)/tests/migration/x86-a-b-bootblock.h: $(SRC_PATH)/tests/migration/x86-a-b-bootblock.s
+	mkdir $(ASM_WORK_DIR)
+	as --32 -march=i486 $< -o $(ASM_WORK_DIR).o
+	objcopy -O binary $(ASM_WORK_DIR).o $(ASM_WORK_DIR).boot
+	dd if=$(ASM_WORK_DIR).boot of=$(ASM_WORK_DIR).bootsect bs=256 count=2 skip=124
+	xxd -i $(ASM_WORK_DIR).bootsect | \
+            sed -e 's/tests_asm_temp_bootsect/bootsect/' -e 's/.*int.*//' > $(ASM_WORK_DIR).hex
+	echo -e "/* This file is automatically generated from\n" \
+             " * tests/migration/x86-a-b-bootblock.s, edit that and then\n" \
+             " * make tests/migration/x86-a-b-bootblock.h to update,\n" \
+             " * and then remember to send both in your patch submission.\n" \
+             " */\n" | cat - $(ASM_WORK_DIR).hex > $@
+	rm $(ASM_WORK_DIR).hex $(ASM_WORK_DIR).bootsect $(ASM_WORK_DIR).boot
Quoted 8 lines

tests/Makefile.include tests/migration/initrd-stress.img: tests/migration/stress$(EXESUF) · line 851

Quoted 4 lines
tests/Makefile.include +4 -0
+	rm $(ASM_WORK_DIR).o
+	rmdir $(ASM_WORK_DIR)
+
+

Could we create a new Makefile.include under tests/migration/ and move the code above there? The code above is very large and can distract people working on tests/Makefile.include.

I've split that out into a separate script and removed the Makefile entry altogether; that way it also doesn't accidentally become a dependency if the times on the .s/.h get screwed up.

Quoted 68 lines
Quoted 68 lines
tests/Makefile.include +0 -0
 ifeq ($(CONFIG_POSIX),y)
 LIBS += -lutil
 endif
tests/migration-test.c +1 -45
index 799e24ebc6..7550fd8d56 100644
@@ -79,51 +79,7 @@ static const char *tmpfs;
 /* A simple PC boot sector that modifies memory (1-100MB) quickly
  * outputing a 'B' every so often if it's still running.
  */
-unsigned char bootsect[] = {
-  0xfa, 0x0f, 0x01, 0x16, 0x74, 0x7c, 0x66, 0xb8, 0x01, 0x00, 0x00, 0x00,
-  0x0f, 0x22, 0xc0, 0x66, 0xea, 0x20, 0x7c, 0x00, 0x00, 0x08, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe4, 0x92, 0x0c, 0x02,
-  0xe6, 0x92, 0xb8, 0x10, 0x00, 0x00, 0x00, 0x8e, 0xd8, 0x66, 0xb8, 0x41,
-  0x00, 0x66, 0xba, 0xf8, 0x03, 0xee, 0xb3, 0x00, 0xb8, 0x00, 0x00, 0x10,
-  0x00, 0xfe, 0x00, 0x05, 0x00, 0x10, 0x00, 0x00, 0x3d, 0x00, 0x00, 0x40,
-  0x06, 0x7c, 0xf2, 0xfe, 0xc3, 0x75, 0xe9, 0x66, 0xb8, 0x42, 0x00, 0x66,
-  0xba, 0xf8, 0x03, 0xee, 0xeb, 0xde, 0x66, 0x90, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x9a, 0xcf, 0x00,
-  0xff, 0xff, 0x00, 0x00, 0x00, 0x92, 0xcf, 0x00, 0x27, 0x00, 0x5c, 0x7c,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xaa
-};
+#include "tests/migration/x86-a-b-bootblock.h"
 
 static void init_bootfile_x86(const char *bootpath)
 {
tests/migration/x86-a-b-bootblock.h new file +2 -0
new file mode 100644
index 0000000000..e45c8dd5b3
@@ -0,0 +1,52 @@
+/* This file is automatically generated from
+  * tests/migration/x86-a-b-bootblock.s, edit that and then
Quoted 8 lines

tests/migration/x86-a-b-bootblock.h line 7

Quoted 5 lines
tests/migration/x86-a-b-bootblock.h new file +5 -0
+  * make tests/migration/x86-a-b-bootblock.h to update,
+  * and then remember to send both in your patch submission.
+  */
+
+unsigned char bootsect[] = {

Given that this is arch-dependent, I think it will be better to add "x86_" as prefix to this variable.

Done.

V2 coming up.

Dave

Quoted 136 lines
Quoted 136 lines
tests/migration/x86-a-b-bootblock.h new file +45 -0
+  0xfa, 0x0f, 0x01, 0x16, 0x74, 0x7c, 0x66, 0xb8, 0x01, 0x00, 0x00, 0x00,
+  0x0f, 0x22, 0xc0, 0x66, 0xea, 0x20, 0x7c, 0x00, 0x00, 0x08, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe4, 0x92, 0x0c, 0x02,
+  0xe6, 0x92, 0xb8, 0x10, 0x00, 0x00, 0x00, 0x8e, 0xd8, 0x66, 0xb8, 0x41,
+  0x00, 0x66, 0xba, 0xf8, 0x03, 0xee, 0xb3, 0x00, 0xb8, 0x00, 0x00, 0x10,
+  0x00, 0xfe, 0x00, 0x05, 0x00, 0x10, 0x00, 0x00, 0x3d, 0x00, 0x00, 0x40,
+  0x06, 0x7c, 0xf2, 0xfe, 0xc3, 0x75, 0xe9, 0x66, 0xb8, 0x42, 0x00, 0x66,
+  0xba, 0xf8, 0x03, 0xee, 0xeb, 0xde, 0x66, 0x90, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x9a, 0xcf, 0x00,
+  0xff, 0xff, 0x00, 0x00, 0x00, 0x92, 0xcf, 0x00, 0x27, 0x00, 0x5c, 0x7c,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xaa
+};
+
tests/migration/x86-a-b-bootblock.s new file +85 -0
new file mode 100644
index 0000000000..7f290014af
@@ -0,0 +1,92 @@
+# x86 bootblock used in migration test
+#  repeatedly increments the first byte of each page in a 100MB
+#  range.
+#  Outputs an initial 'A' on serial followed by repeated 'B's
+#
+# run   make tests/migration/x86-a-b-bootblock.h
+#   to regenerate the hex, and remember to include both the .h and .s
+#   in any patches.
+#
+# Copyright (c) 2016 Red Hat, Inc. and/or its affiliates
+# This work is licensed under the terms of the GNU GPL, version 2 or later.
+# See the COPYING file in the top-level directory.
+#
+# Author: [email protected]
+
+
+.code16
+.org 0x7c00
+        .file   "fill.s"
+        .text
+        .globl  start
+        .type   start, @function
+start:             # at 0x7c00 ?
+        cli
+        lgdt gdtdesc
+        mov $1,%eax
+        mov %eax,%cr0  # Protected mode enable
+        data32 ljmp $8,$0x7c20
+
+.org 0x7c20
+.code32
+        # A20 enable - not sure I actually need this
+        inb $0x92,%al
+        or  $2,%al
+        outb %al, $0x92
+
+        # set up DS for the whole of RAM (needed on KVM)
+        mov $16,%eax
+        mov %eax,%ds
+
+        mov $65,%ax
+        mov $0x3f8,%dx
+        outb %al,%dx
+
+        # bl keeps a counter so we limit the output speed
+        mov $0, %bl
+mainloop:
+        # Start from 1MB
+        mov $(1024*1024),%eax
+innerloop:
+        incb (%eax)
+        add $4096,%eax
+        cmp $(100*1024*1024),%eax
+        jl innerloop
+
+        inc %bl
+        jnz mainloop
+
+        mov $66,%ax
+        mov $0x3f8,%dx
+        outb %al,%dx
+
+        jmp mainloop
+
+        # GDT magic from old (GPLv2)  Grub startup.S
+        .p2align        2       /* force 4-byte alignment */
+gdt:
+        .word   0, 0
+        .byte   0, 0, 0, 0
+
+        /* -- code segment --
+         * base = 0x00000000, limit = 0xFFFFF (4 KiB Granularity), present
+         * type = 32bit code execute/read, DPL = 0
+         */
+        .word   0xFFFF, 0
+        .byte   0, 0x9A, 0xCF, 0
+
+        /* -- data segment --
+         * base = 0x00000000, limit 0xFFFFF (4 KiB Granularity), present
+         * type = 32 bit data read/write, DPL = 0
+         */
+        .word   0xFFFF, 0
+        .byte   0, 0x92, 0xCF, 0
+
+gdtdesc:
Quoted 8 lines

tests/migration/x86-a-b-bootblock.s line 92

Quoted 8 lines
tests/migration/x86-a-b-bootblock.s new file +7 -0
+        .word   0x27                    /* limit */
+        .long   gdt                     /* addr */
+
+/* I'm a bootable disk */
+.org 0x7dfe
+        .byte 0x55
+        .byte 0xAA

--
Dr. David Alan Gilbert / [email protected] / Manchester, UK