ARM: dts: imx: Add support for Advantech DMS-BA16
Subsystems (3)
PATCH v4 1/1 ARM: dts: imx: Add support for Advantech DMS-BA16
Add support for Advantech DMS-BA16 board, which uses the Advantech BA-16 module.
Signed-off-by Ken Lin <[email protected]>
---
Changes in v4:
- Fix the pinctrl entries order issue
- Correct the USB_OTG_ID pinmux
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-dms-ba16.dts | 139 +++++++++++++++++++++++++++++++++++ 2 files changed, 140 insertions(+) create mode 100644 arch/arm/boot/dts/imx6q-dms-ba16.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -435,6 +435,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-dfi-fs700-m60.dtb \ imx6q-display5-tianma-tm070-1280x768.dtb \ imx6q-dmo-edmqmx6.dtb \ + imx6q-dms-ba16.dtb \ imx6q-evi.dtb \ imx6q-gk802.dtb \ imx6q-gw51xx.dtb \
arch/arm/boot/dts/imx6q-dms-ba16.dts new file +139 -0
139 lines not on this page · raw message
Signature · 1 line
2.11.0
Quoted 4 lines · Ken Lin
Add support for Advantech DMS-BA16 board, which uses the Advantech BA-16 module.
Signed-off-by Ken Lin <[email protected]>
Reviewed-by Fabio Estevam <[email protected]>
Shawn Guo
AppliedQuoted 4 lines · Ken Lin
Add support for Advantech DMS-BA16 board, which uses the Advantech BA-16 module.
Signed-off-by Ken Lin <[email protected]>
Applied, thanks.