tests/perf_pmu: Use perf timestamps in a few more places
PATCH 1/3 tests/perf_pmu: Use perf timestamps in a few more places
From: Tvrtko Ursulin <[email protected]>
Use perf timestamps in more places where possible.
--- tests/perf_pmu.c | 48 +++++++++++++++++++++++------------------------- 1 file changed, 23 insertions(+), 25 deletions(-)
tests/perf_pmu.c +23 -25
@@ -203,9 +203,8 @@ single(int gem_fd, const struct intel_execution_engine2 *e, unsigned int flags)static void busy_start (int gem_fd,const struct intel_execution_engine2 *e) { -unsigned long slept; +uint64_t val, ts[2 ];igt_spin_t *spin; -uint64_t val;int fd;/*
@@ -224,14 +223,14 @@ busy_start(int gem_fd, const struct intel_execution_engine2 *e) fd =open_pmu (I915_PMU_ENGINE_BUSY (e->class, e->instance)); - val =pmu_read_single (fd); - slept =measured_usleep (batch_duration_ns /1000 ); - val =pmu_read_single (fd) - val; + val =__pmu_read_single (fd, &ts[0 ]); +measured_usleep (batch_duration_ns /1000 ); + val =__pmu_read_single (fd, &ts[1 ]) - val;igt_spin_batch_free (gem_fd, spin);close (fd); -assert_within_epsilon (val, slept, tolerance); +assert_within_epsilon (val, ts[1 ] - ts[0 ], tolerance);gem_quiescent_gpu (gem_fd); }
@@ -243,9 +242,8 @@ busy_start(int gem_fd, const struct intel_execution_engine2 *e)static void busy_double_start (int gem_fd,const struct intel_execution_engine2 *e) { -unsigned long slept; +uint64_t val, val2, ts[2 ];igt_spin_t *spin[2 ]; -uint64_t val, val2;uint32_t ctx;int fd;
@@ -272,9 +270,9 @@ busy_double_start(int gem_fd, const struct intel_execution_engine2 *e)*/ fd =open_pmu (I915_PMU_ENGINE_BUSY (e->class, e->instance)); - val =pmu_read_single (fd); - slept =measured_usleep (batch_duration_ns /1000 ); - val =pmu_read_single (fd) - val; + val =__pmu_read_single (fd, &ts[0 ]); +measured_usleep (batch_duration_ns /1000 ); + val =__pmu_read_single (fd, &ts[1 ]) - val;igt_spin_batch_end (spin[0 ]);igt_spin_batch_end (spin[1 ]);
@@ -295,7 +293,7 @@ busy_double_start(int gem_fd, const struct intel_execution_engine2 *e)gem_context_destroy (gem_fd, ctx); -assert_within_epsilon (val, slept, tolerance); +assert_within_epsilon (val, ts[1 ] - ts[0 ], tolerance);igt_assert_eq (val2,0 );gem_quiescent_gpu (gem_fd);
@@ -821,9 +819,8 @@ static void multi_client(int gem_fd, const struct intel_execution_engine2 *e) { uint64_t config = I915_PMU_ENGINE_BUSY(e->class, e->instance); -unsigned int slept[2 ]; +uint64_t val[2 ], ts[2 ], slept[2 ];igt_spin_t *spin; -uint64_t val[2 ];int fd[2 ];gem_quiescent_gpu (gem_fd);
@@ -839,13 +836,15 @@ multi_client(int gem_fd, const struct intel_execution_engine2 *e) spin =igt_spin_batch_new (gem_fd,0 ,e2ring (gem_fd, e),0 ); - val[0 ] = val[1 ] =pmu_read_single (fd[0 ]); - slept[1 ] =measured_usleep (batch_duration_ns /1000 ); - val[1 ] =pmu_read_single (fd[1 ]) - val[1 ]; + val[0 ] = val[1 ] =__pmu_read_single (fd[0 ], &ts[0 ]); +measured_usleep (batch_duration_ns /1000 ); + val[1 ] =__pmu_read_single (fd[1 ], &ts[1 ]) - val[1 ]; + slept[1 ] = ts[1 ] - ts[0 ];close (fd[1 ]); - slept[0 ] =measured_usleep (batch_duration_ns /1000 ) + slept[1 ]; - val[0 ] =pmu_read_single (fd[0 ]) - val[0 ]; +measured_usleep (batch_duration_ns /1000 ); + val[0 ] =__pmu_read_single (fd[0 ], &ts[1 ]) - val[0 ]; + slept[0 ] = ts[1 ] - ts[0 ];igt_spin_batch_end (spin);gem_sync (gem_fd, spin->handle);
@@ -1252,8 +1251,7 @@ static void test_rc6(int gem_fd, unsigned int flags) { int64_t duration_ns = 2e9; -uint64_t idle, busy, prev; -unsigned int slept; +uint64_t idle, busy, prev, ts[2 ];int fd, fw;gem_quiescent_gpu (gem_fd);
@@ -1288,11 +1286,11 @@ test_rc6(int gem_fd, unsigned int flags)igt_require (wait_for_rc6 (fd));/* While idle check full RC6. */ - prev =pmu_read_single (fd); - slept =measured_usleep (duration_ns /1000 ); - idle =pmu_read_single (fd); + prev =__pmu_read_single (fd, &ts[0 ]); +measured_usleep (duration_ns /1000 ); + idle =__pmu_read_single (fd, &ts[1 ]); -assert_within_epsilon (idle - prev, slept, tolerance); +assert_within_epsilon (idle - prev, ts[1 ] - ts[0 ], tolerance);/* Wake up device and check no RC6. */ fw =igt_open_forcewake_handle (gem_fd);
Signature · 6 lines
2.14.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 2/3 tests/perf_pmu: Handle thermally throttled devices
From: Tvrtko Ursulin <[email protected]>
Some systems cannot reach the advertised maximum frequency due throttling. Handle them by considering a 100MHz lower limit.
--- tests/perf_pmu.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
tests/perf_pmu.c +6 -1
@@ -1222,8 +1222,13 @@ test_frequency(int gem_fd) min[0], min[1]);igt_info ("Max frequency: requested %.1f, actual %.1f\n" , max[0 ], max[1 ]); +assert_within_epsilon (min[0 ], min_freq, tolerance); -assert_within_epsilon (max[0 ], max_freq, tolerance); +/* +* On thermally throttled devices we cannot be sure maximum frequency +* can be reached so use a lower limit. +*/ +igt_assert (max[0 ] >= ((double )max_freq -100.0 )); }static bool wait_for_rc6 (int fd)
Signature · 6 lines
2.14.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t 2/3] tests/perf_pmu: Handle thermally throttled devices
Quoting Tvrtko Ursulin (2018-02-08 08:01:30)
Quoted 16 lines
From: Tvrtko Ursulin <[email protected]>
Some systems cannot reach the advertised maximum frequency due throttling. Handle them by considering a 100MHz lower limit.
Signed-off-by Tvrtko Ursulin <[email protected]>--- tests/perf_pmu.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)tests/perf_pmu.c +0
-0@@ -1222,8 +1222,13 @@ test_frequency(int gem_fd) min[0], min[1]);
tests/perf_pmu.c test_frequency(int gem_fd) · line 1231
Quoted 10 lines
tests/perf_pmu.c +6
-1igt_info ("Max frequency: requested %.1f, actual %.1f\n" , max[0 ], max[1 ]); +assert_within_epsilon (min[0 ], min_freq, tolerance); -assert_within_epsilon (max[0 ], max_freq, tolerance); +/* +* On thermally throttled devices we cannot be sure maximum frequency +* can be reached so use a lower limit. +*/ +igt_assert (max[0 ] >= ((double )max_freq -100.0 ));
We still want a 2-sided check though. We shouldn't be reporting max > max_freq (beyond reasonable calculation errors).
-Chris
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH v2 2/3 tests/perf_pmu: Handle thermally throttled devices
From: Tvrtko Ursulin <[email protected]>
Some systems cannot reach the advertised maximum frequency due throttling. Handle them by considering a 100MHz lower limit.
v2: Use more relaxed tolerance only in the downward direction.
(Chris Wilson)
--- tests/perf_pmu.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-)
tests/perf_pmu.c +15 -5
@@ -120,11 +120,16 @@ static uint64_t pmu_read_multi(int fd, unsigned int num, uint64_t *val)return buf[1 ]; } +#define __assert_within_epsilon (x, ref, tol_up, tol_down) \ + igt_assert_f((double)(x) <= (1.0 + (tol_up)) * (double)(ref) && \ + (double)(x) >= (1.0 - (tol_down)) * (double)(ref), \ + "'%s' != '%s' (%f not within %f%%/%f%% tolerance of %f)\n",\ + #x, #ref, (double)(x), \ + (tol_up) * 100.0, (tol_down) * 100.0, \ + (double)(ref)) +#define assert_within_epsilon (x, ref, tolerance) \ - igt_assert_f((double)(x) <= (1.0 + (tolerance)) * (double)(ref) && \ - (double)(x) >= (1.0 - (tolerance)) * (double)(ref), \ - "'%s' != '%s' (%f not within %f%% tolerance of %f)\n",\ - #x, #ref, (double)(x), (tolerance) * 100.0, (double)(ref)) + __assert_within_epsilon(x, ref, tolerance, tolerance)/* * Helper for cases where we assert on time spent sleeping (directly or
@@ -1229,8 +1234,13 @@ test_frequency(int gem_fd) min[0], min[1]);igt_info ("Max frequency: requested %.1f, actual %.1f\n" , max[0 ], max[1 ]); +assert_within_epsilon (min[0 ], min_freq, tolerance); -assert_within_epsilon (max[0 ], max_freq, tolerance); +/* +* On thermally throttled devices we cannot be sure maximum frequency +* can be reached so use larger tolerance downards. +*/ +__assert_within_epsilon (max[0 ], max_freq, tolerance,0.15f ); }static bool wait_for_rc6 (int fd)
Signature · 6 lines
2.14.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t v2 2/3] tests/perf_pmu: Handle thermally throttled devices
Quoting Tvrtko Ursulin (2018-02-12 09:47:24)
Quoted 18 lines
From: Tvrtko Ursulin <[email protected]>
Some systems cannot reach the advertised maximum frequency due throttling. Handle them by considering a 100MHz lower limit.
v2: Use more relaxed tolerance only in the downward direction.
(Chris Wilson)Signed-off-by Tvrtko Ursulin <[email protected]>--- tests/perf_pmu.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-)tests/perf_pmu.c +0
-0
tests/perf_pmu.c static uint64_t pmu_read_multi(int fd, unsigned int num, uint64_t *val) · line 126
Quoted 7 lines
tests/perf_pmu.c +4
-0@@ -120,11 +120,16 @@ static uint64_t pmu_read_multi(int fd, unsigned int num, uint64_t *val)return buf[1 ]; } +#define __assert_within_epsilon (x, ref, tol_up, tol_down) \ + igt_assert_f((double)(x) <= (1.0 + (tol_up)) * (double)(ref) && \ + (double)(x) >= (1.0 - (tol_down)) * (double)(ref), \ + "'%s' != '%s' (%f not within %f%%/%f%% tolerance of %f)\n",\
Would "not within (-%%, +%%)" or "...(%% below, %% above)" read better?
-Chris
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH v3 2/3 tests/perf_pmu: Handle thermally throttled devices
From: Tvrtko Ursulin <[email protected]>
Some systems cannot reach the advertised maximum frequency due throttling. Handle them by considering a 100MHz lower limit.
v2: Use more relaxed tolerance only in the downward direction.
(Chris Wilson)
v3: Improved assert message. (Chris Wilson)
--- tests/perf_pmu.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-)
tests/perf_pmu.c +15 -5
@@ -120,11 +120,16 @@ static uint64_t pmu_read_multi(int fd, unsigned int num, uint64_t *val)return buf[1 ]; } +#define __assert_within_epsilon (x, ref, tol_up, tol_down) \ + igt_assert_f((double)(x) <= (1.0 + (tol_up)) * (double)(ref) && \ + (double)(x) >= (1.0 - (tol_down)) * (double)(ref), \ + "'%s' != '%s' (%f not within +%f%%/-%f%% tolerance of %f)\n",\ + #x, #ref, (double)(x), \ + (tol_up) * 100.0, (tol_down) * 100.0, \ + (double)(ref)) +#define assert_within_epsilon (x, ref, tolerance) \ - igt_assert_f((double)(x) <= (1.0 + (tolerance)) * (double)(ref) && \ - (double)(x) >= (1.0 - (tolerance)) * (double)(ref), \ - "'%s' != '%s' (%f not within %f%% tolerance of %f)\n",\ - #x, #ref, (double)(x), (tolerance) * 100.0, (double)(ref)) + __assert_within_epsilon(x, ref, tolerance, tolerance)/* * Helper for cases where we assert on time spent sleeping (directly or
@@ -1229,8 +1234,13 @@ test_frequency(int gem_fd) min[0], min[1]);igt_info ("Max frequency: requested %.1f, actual %.1f\n" , max[0 ], max[1 ]); +assert_within_epsilon (min[0 ], min_freq, tolerance); -assert_within_epsilon (max[0 ], max_freq, tolerance); +/* +* On thermally throttled devices we cannot be sure maximum frequency +* can be reached so use larger tolerance downards. +*/ +__assert_within_epsilon (max[0 ], max_freq, tolerance,0.15f ); }static bool wait_for_rc6 (int fd)
Signature · 6 lines
2.14.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 3/3 tests/perf_pmu: Give sampling more time
In reply to Tvrtko UrsulinFrom: Tvrtko Ursulin <[email protected]>
We get occasional errors like:
(perf_pmu:21315) CRITICAL: Test assertion failure function sema_wait, file perf_pmu.c:631:
(perf_pmu:21315) CRITICAL: Failed assertion: (double)(val[1] - val[0]) <= (1.0 + (tolerance)) * (double)(slept) && (double)(val[1] - val[0]) >= (1.0 - (tolerance)) * (double)(slept) (perf_pmu:21315) CRITICAL: 'val[1] - val[0]' != 'slept' (450000000.000000 not within 5.000000% tolerance of 500129618.000000)
Suggesting a time disagreement between userspace and the PMU.
At the moment I got no better ideas than fiddling with delays to see if it improves things.
--- tests/perf_pmu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
tests/perf_pmu.c +3 -1
@@ -608,7 +608,9 @@ sema_wait(int gem_fd, const struct intel_execution_engine2 *e,do {/* wait for the batch to start executing */ usleep (5e3 ); }while (!obj_ptr[1 ]); -usleep (5e3 );/* wait for the register sampling */ + +pmu_read_single (fd);/* dummy read to prime pmu? */ +usleep (50e3 );/* wait for the register sampling */ val[0 ] =pmu_read_single (fd); slept =measured_usleep (batch_duration_ns /1000 );
Signature · 6 lines
2.14.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t 3/3] tests/perf_pmu: Give sampling more time
Quoting Tvrtko Ursulin (2018-02-08 08:01:31)
Quoted 7 lines
From: Tvrtko Ursulin <[email protected]>
We get occasional errors like:
(perf_pmu:21315) CRITICAL: Test assertion failure function
sema_wait, file perf_pmu.c:631:
(perf_pmu:21315) CRITICAL: Failed assertion: (double)(val[1] - val[0]) <= (1.0 + (tolerance)) * (double)(slept) && (double)(val[1] - val[0]) >= (1.0 - (tolerance)) * (double)(slept) (perf_pmu:21315) CRITICAL: 'val[1] - val[0]' != 'slept' (450000000.000000 not within 5.000000% tolerance of 500129618.000000)
Something to remember when reporting pmu errors is whether it's sampling. In this case sema_wait is always sampling... But I wonder if we can report it from pmu somehow?
-Chris
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t 3/3] tests/perf_pmu: Give sampling more time
Quoted 5 lines · Chris Wilson
Quoting Tvrtko Ursulin (2018-02-08 08:01:31)
Quoted 4 lines
From: Tvrtko Ursulin <[email protected]>
We get occasional errors like:
Quoted 7 lines
Quoted 3 lines
(perf_pmu:21315) CRITICAL: Test assertion failure function
sema_wait, file perf_pmu.c:631:
(perf_pmu:21315) CRITICAL: Failed assertion: (double)(val[1] - val[0]) <= (1.0 + (tolerance)) * (double)(slept) && (double)(val[1] - val[0]) >= (1.0 - (tolerance)) * (double)(slept) (perf_pmu:21315) CRITICAL: 'val[1] - val[0]' != 'slept' (450000000.000000 not within 5.000000% tolerance of 500129618.000000)Something to remember when reporting pmu errors is whether it's sampling. In this case
sema_waitis always sampling... But I wonder if we can report it from pmu somehow?
Theoretically I think we could add our own file to sysfs, alongside <counter-name>(.unit|.scale) etc.. like ".resolution" or something. Not sure how polite that would be though.. not very I think. Alternative would be to create additional pmu hierarchy in debugfs with this data.
Regards,
Tvrtko
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t 3/3] tests/perf_pmu: Give sampling more time
In reply to Tvrtko UrsulinQuoting Tvrtko Ursulin (2018-02-08 08:01:31)
Quoted 23 lines
From: Tvrtko Ursulin <[email protected]>
We get occasional errors like:
(perf_pmu:21315) CRITICAL: Test assertion failure function
sema_wait, file perf_pmu.c:631:
(perf_pmu:21315) CRITICAL: Failed assertion: (double)(val[1] - val[0]) <= (1.0 + (tolerance)) * (double)(slept) && (double)(val[1] - val[0]) >= (1.0 - (tolerance)) * (double)(slept) (perf_pmu:21315) CRITICAL: 'val[1] - val[0]' != 'slept' (450000000.000000 not within 5.000000% tolerance of 500129618.000000)Suggesting a time disagreement between userspace and the PMU.
At the moment I got no better ideas than fiddling with delays to see if it improves things.
Signed-off-by Tvrtko Ursulin <[email protected]>--- tests/perf_pmu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)tests/perf_pmu.c +0
-0
tests/perf_pmu.c sema_wait(int gem_fd, const struct intel_execution_engine2 *e, · line 613
Quoted 7 lines
tests/perf_pmu.c +3
-1@@ -608,7 +608,9 @@ sema_wait(int gem_fd, const struct intel_execution_engine2 *e,do {/* wait for the batch to start executing */ usleep (5e3 ); }while (!obj_ptr[1 ]); -usleep (5e3 );/* wait for the register sampling */ + +pmu_read_single (fd);/* dummy read to prime pmu? */ +usleep (50e3 );/* wait for the register sampling */
Maybe something like igt_assert_f(igt_wait(pmu_read_single(fd) != val[0], 10),
"sampling failed to start within 10msecs");
Bonus is that we will get an igt_debug() telling us how long it took. -Chris
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH v2 3/3 tests/perf_pmu: Give sampling more time
From: Tvrtko Ursulin <[email protected]>
We get occasional errors like:
(perf_pmu:21315) CRITICAL: Test assertion failure function sema_wait, file perf_pmu.c:631:
(perf_pmu:21315) CRITICAL: Failed assertion: (double)(val[1] - val[0]) <= (1.0 + (tolerance)) * (double)(slept) && (double)(val[1] - val[0]) >= (1.0 - (tolerance)) * (double)(slept) (perf_pmu:21315) CRITICAL: 'val[1] - val[0]' != 'slept' (450000000.000000 not within 5.000000% tolerance of 500129618.000000)
Suggesting a time disagreement between userspace and the PMU.
At the moment I got no better ideas than fiddling with delays to see if it improves things.
v2: Wait for sampling to start instead of hardcoded sleep. (Chris Wilson)
--- tests/perf_pmu.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
tests/perf_pmu.c +5 -1
@@ -613,11 +613,15 @@ sema_wait(int gem_fd, const struct intel_execution_engine2 *e, fd =open_pmu (I915_PMU_ENGINE_SEMA (e->class, e->instance)); + val[0 ] =pmu_read_single (fd); +gem_execbuf (gem_fd, &eb);do {/* wait for the batch to start executing */ usleep (5e3 ); }while (!obj_ptr[1 ]); -usleep (5e3 );/* wait for the register sampling */ + +igt_assert_f (igt_wait (pmu_read_single (fd) != val[0 ],10 ,1 ), +"sampling failed to start withing 10ms" ); val[0 ] =pmu_read_single (fd); slept =measured_usleep (batch_duration_ns /1000 );
Signature · 6 lines
2.14.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t v2 3/3] tests/perf_pmu: Give sampling more time
Quoting Tvrtko Ursulin (2018-02-12 11:36:07)
Quoted 8 lines
From: Tvrtko Ursulin <[email protected]>
We get occasional errors like:
(perf_pmu:21315) CRITICAL: Test assertion failure function
sema_wait, file perf_pmu.c:631:
(perf_pmu:21315) CRITICAL: Failed assertion: (double)(val[1] - val[0]) <= (1.0 + (tolerance)) * (double)(slept) && (double)(val[1] - val[0]) >= (1.0 - (tolerance)) * (double)(slept) (perf_pmu:21315) CRITICAL: 'val[1] - val[0]' != 'slept' (450000000.000000 not within 5.000000% tolerance of 500129618.000000)
Quoted 8 lines
Suggesting a time disagreement between userspace and the PMU.
At the moment I got no better ideas than fiddling with delays to see if it improves things.
v2: Wait for sampling to start instead of hardcoded sleep. (Chris Wilson)
Signed-off-by Tvrtko Ursulin <[email protected]>
Sadly a consequence is going to be that 1ms minimum delay, but shucks. I'm looking at the open-coded wait for batch to start next :) -Chris
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoting Tvrtko Ursulin (2018-02-08 08:01:29)
Quoted 3 lines
From: Tvrtko Ursulin <[email protected]>
Use perf timestamps in more places where possible.
Minor request, keep ulong slept around and igt_debug the difference between slept and ts[].
-Chris
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH v2 1/3 tests/perf_pmu: Use perf timestamps in a few more places
From: Tvrtko Ursulin <[email protected]>
Use perf timestamps in more places where possible.
v2: Log measure_usleep vs perf timestamps. (Chris Wilson)
--- tests/perf_pmu.c | 47 +++++++++++++++++++++++++++-------------------- 1 file changed, 27 insertions(+), 20 deletions(-)
tests/perf_pmu.c +27 -20
@@ -204,8 +204,8 @@ static void busy_start(int gem_fd, const struct intel_execution_engine2 *e) { unsigned long slept; +uint64_t val, ts[2 ];igt_spin_t *spin; -uint64_t val;int fd;/*
@@ -224,14 +224,15 @@ busy_start(int gem_fd, const struct intel_execution_engine2 *e) fd =open_pmu (I915_PMU_ENGINE_BUSY (e->class, e->instance)); - val =pmu_read_single (fd); + val =__pmu_read_single (fd, &ts[0 ]); slept =measured_usleep (batch_duration_ns /1000 ); - val =pmu_read_single (fd) - val; + val =__pmu_read_single (fd, &ts[1 ]) - val; +igt_debug ("slept=%lu perf=%" PRIu64"\n" , slept, ts[1 ] - ts[0 ]);igt_spin_batch_free (gem_fd, spin);close (fd); -assert_within_epsilon (val, slept, tolerance); +assert_within_epsilon (val, ts[1 ] - ts[0 ], tolerance);gem_quiescent_gpu (gem_fd); }
@@ -244,8 +245,8 @@ static void busy_double_start(int gem_fd, const struct intel_execution_engine2 *e) { unsigned long slept; +uint64_t val, val2, ts[2 ];igt_spin_t *spin[2 ]; -uint64_t val, val2;uint32_t ctx;int fd;
@@ -272,9 +273,10 @@ busy_double_start(int gem_fd, const struct intel_execution_engine2 *e)*/ fd =open_pmu (I915_PMU_ENGINE_BUSY (e->class, e->instance)); - val =pmu_read_single (fd); + val =__pmu_read_single (fd, &ts[0 ]); slept =measured_usleep (batch_duration_ns /1000 ); - val =pmu_read_single (fd) - val; + val =__pmu_read_single (fd, &ts[1 ]) - val; +igt_debug ("slept=%lu perf=%" PRIu64"\n" , slept, ts[1 ] - ts[0 ]);igt_spin_batch_end (spin[0 ]);igt_spin_batch_end (spin[1 ]);
@@ -295,7 +297,7 @@ busy_double_start(int gem_fd, const struct intel_execution_engine2 *e)gem_context_destroy (gem_fd, ctx); -assert_within_epsilon (val, slept, tolerance); +assert_within_epsilon (val, ts[1 ] - ts[0 ], tolerance);igt_assert_eq (val2,0 );gem_quiescent_gpu (gem_fd);
@@ -821,9 +823,9 @@ static void multi_client(int gem_fd, const struct intel_execution_engine2 *e) { uint64_t config = I915_PMU_ENGINE_BUSY(e->class, e->instance); -unsigned int slept[2 ]; +unsigned long slept[2 ]; +uint64_t val[2 ], ts[2 ], perf_slept[2 ];igt_spin_t *spin; -uint64_t val[2 ];int fd[2 ];gem_quiescent_gpu (gem_fd);
@@ -839,21 +841,25 @@ multi_client(int gem_fd, const struct intel_execution_engine2 *e) spin =igt_spin_batch_new (gem_fd,0 ,e2ring (gem_fd, e),0 ); - val[0 ] = val[1 ] =pmu_read_single (fd[0 ]); + val[0 ] = val[1 ] =__pmu_read_single (fd[0 ], &ts[0 ]); slept[1 ] =measured_usleep (batch_duration_ns /1000 ); - val[1 ] =pmu_read_single (fd[1 ]) - val[1 ]; + val[1 ] =__pmu_read_single (fd[1 ], &ts[1 ]) - val[1 ]; + perf_slept[1 ] = ts[1 ] - ts[0 ]; +igt_debug ("slept=%lu perf=%" PRIu64"\n" , slept[1 ], perf_slept[1 ]);close (fd[1 ]); slept[0 ] =measured_usleep (batch_duration_ns /1000 ) + slept[1 ]; - val[0 ] =pmu_read_single (fd[0 ]) - val[0 ]; + val[0 ] =__pmu_read_single (fd[0 ], &ts[1 ]) - val[0 ]; + perf_slept[0 ] = ts[1 ] - ts[0 ]; +igt_debug ("slept=%lu perf=%" PRIu64"\n" , slept[0 ], perf_slept[0 ]);igt_spin_batch_end (spin);gem_sync (gem_fd, spin->handle);igt_spin_batch_free (gem_fd, spin);close (fd[0 ]); -assert_within_epsilon (val[0 ], slept[0 ], tolerance); -assert_within_epsilon (val[1 ], slept[1 ], tolerance); +assert_within_epsilon (val[0 ], perf_slept[0 ], tolerance); +assert_within_epsilon (val[1 ], perf_slept[1 ], tolerance); }/**
@@ -1252,8 +1258,8 @@ static void test_rc6(int gem_fd, unsigned int flags) { int64_t duration_ns = 2e9; -uint64_t idle, busy, prev; -unsigned int slept; +uint64_t idle, busy, prev, ts[2 ]; +unsigned long slept;int fd, fw;gem_quiescent_gpu (gem_fd);
@@ -1288,11 +1294,12 @@ test_rc6(int gem_fd, unsigned int flags)igt_require (wait_for_rc6 (fd));/* While idle check full RC6. */ - prev =pmu_read_single (fd); + prev =__pmu_read_single (fd, &ts[0 ]); slept =measured_usleep (duration_ns /1000 ); - idle =pmu_read_single (fd); + idle =__pmu_read_single (fd, &ts[1 ]); +igt_debug ("slept=%lu perf=%" PRIu64"\n" , slept, ts[1 ] - ts[0 ]); -assert_within_epsilon (idle - prev, slept, tolerance); +assert_within_epsilon (idle - prev, ts[1 ] - ts[0 ], tolerance);/* Wake up device and check no RC6. */ fw =igt_open_forcewake_handle (gem_fd);
Signature · 6 lines
2.14.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoting Tvrtko Ursulin (2018-02-12 09:46:38)
Quoted 7 lines
From: Tvrtko Ursulin <[email protected]>
Use perf timestamps in more places where possible.
v2: Log
measure_usleepvs perf timestamps. (Chris Wilson)Signed-off-by Tvrtko Ursulin <[email protected]>
-Chris
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,1/3] tests/perf_pmu: Use perf timestamps in a few more places
In reply to Tvrtko Ursulin== Series Details ==
== Series Details ==
Series: series starting with [i-g-t,1/3] tests/perf_pmu: Use perf timestamps in a few more places
URL : https://patchwork.freedesktop.org/series/37874/
State : success
== Summary ==
IGT patchset tested on top of latest successful build3af87d45da24015b7a6124b59b2c4b854381cab6 tools/intel_aubdump: Simulate "enhanced execlist" submission for gen11+
with latest DRM-Tip kernel build CI_DRM_374102138262c598 drm-tip: 2018y-02m-08d-09h-37m-41s UTC integration manifest
No testlist changes.
Test debugfs_test:
Subgroup read_all_entries:
incomplete -> PASS (fi-snb-2520m) fdo#103713
Test kms_frontbuffer_tracking:
Subgroup basic:
pass -> FAIL (fi-cnl-y3) fdo#103167fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
fi-bdw-5557u total:288 pass:267 dwarn:0 dfail:0 fail:0 skip:21 time:420s fi-bdw-gvtdvm total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:426s fi-blb-e6850 total:288 pass:223 dwarn:1 dfail:0 fail:0 skip:64 time:377s fi-bsw-n3050 total:288 pass:242 dwarn:0 dfail:0 fail:0 skip:46 time:494s fi-bwr-2160 total:288 pass:183 dwarn:0 dfail:0 fail:0 skip:105 time:288s fi-bxt-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:485s fi-bxt-j4205 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:491s fi-byt-j1900 total:288 pass:253 dwarn:0 dfail:0 fail:0 skip:35 time:473s fi-byt-n2820 total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:457s fi-cfl-s2 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:564s fi-cnl-y3 total:288 pass:261 dwarn:0 dfail:0 fail:1 skip:26 time:581s fi-elk-e7500 total:288 pass:229 dwarn:0 dfail:0 fail:0 skip:59 time:418s fi-gdg-551 total:288 pass:179 dwarn:0 dfail:0 fail:1 skip:108 time:286s fi-glk-1 total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:515s fi-hsw-4770 total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:394s fi-ilk-650 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:60 time:415s fi-ivb-3520m total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:461s fi-ivb-3770 total:288 pass:255 dwarn:0 dfail:0 fail:0 skip:33 time:419s fi-kbl-7500u total:288 pass:263 dwarn:1 dfail:0 fail:0 skip:24 time:460s fi-kbl-7560u total:288 pass:269 dwarn:0 dfail:0 fail:0 skip:19 time:499s fi-kbl-7567u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:454s fi-kbl-r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:501s fi-pnv-d510 total:288 pass:222 dwarn:1 dfail:0 fail:0 skip:65 time:603s fi-skl-6260u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:431s fi-skl-6600u total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:508s fi-skl-6700hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:528s fi-skl-6700k2 total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:488s fi-skl-6770hq total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:488s fi-skl-guc total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:417s fi-skl-gvtdvm total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:23 time:434s fi-snb-2520m total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:524s fi-snb-2600 total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:402s
Blacklisted hosts:
fi-glk-dsi total:288 pass:152 dwarn:1 dfail:4 fail:0 skip:131 time:280s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_888/issues.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✗ Fi.CI.IGT: failure for series starting with [i-g-t,1/3] tests/perf_pmu: Use perf timestamps in a few more places
In reply to Tvrtko Ursulin== Series Details ==
== Series Details ==
Series: series starting with [i-g-t,1/3] tests/perf_pmu: Use perf timestamps in a few more places
URL : https://patchwork.freedesktop.org/series/37874/
State : failure
== Summary ==
Test kms_flip:
Subgroup 2x-flip-vs-expired-vblank:
fail -> PASS (shard-hsw) fdo#102887
Subgroup 2x-plain-flip-ts-check-interruptible:
pass -> FAIL (shard-hsw) fdo#100368
Test drv_suspend:
Subgroup debugfs-reader:
skip -> PASS (shard-snb) fdo#102365 +2
Test gem_softpin:
Subgroup noreloc-s3:
pass -> SKIP (shard-snb) fdo#103375 +1
Test gem_eio:
Subgroup suspend:
pass -> INCOMPLETE (shard-hsw)fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#102365 https://bugs.freedesktop.org/show_bug.cgi?id=102365
fdo#103375 https://bugs.freedesktop.org/show_bug.cgi?id=103375
shard-hsw total:3414 pass:1744 dwarn:1 dfail:0 fail:11 skip:1656 time:11484s shard-snb total:3444 pass:1349 dwarn:1 dfail:0 fail:10 skip:2084 time:6391s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_888/shards.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,v2,1/3] tests/perf_pmu: Use perf timestamps in a few more places (rev3)
In reply to Tvrtko Ursulin== Series Details ==
== Series Details ==
Series: series starting with [i-g-t,v2,1/3] tests/perf_pmu: Use perf timestamps in a few more places (rev3)
URL : https://patchwork.freedesktop.org/series/37874/
State : success
== Summary ==
IGT patchset tested on top of latest successful build 8b9f68a13442c9307ef602cb9f0282e0c4ec43e2 igt/pm_rc6_residency: Check debugfs existence before reading
with latest DRM-Tip kernel build CI_DRM_375428dc2a502747 drm-tip: 2018y-02m-12d-09h-02m-17s UTC integration manifest
No testlist changes.
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-a:
dmesg-warn -> PASS (fi-cnl-y3) fdo#103191fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fi-bdw-5557u total:288 pass:267 dwarn:0 dfail:0 fail:0 skip:21 time:430s fi-bdw-gvtdvm total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:425s fi-blb-e6850 total:288 pass:223 dwarn:1 dfail:0 fail:0 skip:64 time:376s fi-bsw-n3050 total:288 pass:242 dwarn:0 dfail:0 fail:0 skip:46 time:496s fi-bwr-2160 total:288 pass:183 dwarn:0 dfail:0 fail:0 skip:105 time:291s fi-bxt-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:485s fi-bxt-j4205 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:487s fi-byt-j1900 total:288 pass:253 dwarn:0 dfail:0 fail:0 skip:35 time:474s fi-byt-n2820 total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:460s fi-cfl-s2 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:574s fi-cnl-y3 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:570s fi-elk-e7500 total:288 pass:229 dwarn:0 dfail:0 fail:0 skip:59 time:419s fi-gdg-551 total:288 pass:179 dwarn:0 dfail:0 fail:1 skip:108 time:282s fi-glk-1 total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:511s fi-hsw-4770 total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:393s fi-ilk-650 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:60 time:418s fi-ivb-3520m total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:463s fi-ivb-3770 total:288 pass:255 dwarn:0 dfail:0 fail:0 skip:33 time:414s fi-kbl-7500u total:288 pass:263 dwarn:1 dfail:0 fail:0 skip:24 time:461s fi-kbl-7560u total:288 pass:269 dwarn:0 dfail:0 fail:0 skip:19 time:498s fi-kbl-r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:502s fi-pnv-d510 total:288 pass:222 dwarn:1 dfail:0 fail:0 skip:65 time:592s fi-skl-6260u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:433s fi-skl-6600u total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:509s fi-skl-6700hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:532s fi-skl-6700k2 total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:485s fi-skl-6770hq total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:484s fi-skl-guc total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:416s fi-skl-gvtdvm total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:23 time:432s fi-snb-2520m total:3 pass:2 dwarn:0 dfail:0 fail:0 skip:0 fi-snb-2600 total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:401s
Blacklisted hosts:
fi-glk-dsi total:288 pass:256 dwarn:0 dfail:0 fail:2 skip:30 time:491s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_901/issues.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✗ Fi.CI.IGT: warning for series starting with [i-g-t,v2,1/3] tests/perf_pmu: Use perf timestamps in a few more places (rev3)
In reply to Tvrtko Ursulin== Series Details ==
== Series Details ==
Series: series starting with [i-g-t,v2,1/3] tests/perf_pmu: Use perf timestamps in a few more places (rev3)
URL : https://patchwork.freedesktop.org/series/37874/
State : warning
== Summary ==
Test kms_frontbuffer_tracking:
Subgroup fbc-rgb565-draw-blt:
fail -> PASS (shard-apl) fdo#101623 +1
Test kms_fbcon_fbt:
Subgroup fbc-suspend:
pass -> DMESG-WARN (shard-snb)
Test kms_cursor_legacy:
Subgroup flip-vs-cursor-atomic:
fail -> PASS (shard-hsw) fdo#102670
Subgroup cursor-vs-flip-atomic-transitions:
fail -> PASS (shard-apl) fdo#103355
Test kms_flip:
Subgroup modeset-vs-vblank-race:
pass -> FAIL (shard-hsw) fdo#103060 +1
Subgroup basic-flip-vs-wf_vblank:
pass -> FAIL (shard-hsw) fdo#103928
Subgroup flip-vs-expired-vblank-interruptible:
pass -> FAIL (shard-apl) fdo#102887
Test gem_softpin:
Subgroup noreloc-s3:
dmesg-warn -> PASS (shard-snb) fdo#103375
Test gem_eio:
Subgroup in-flight-suspend:
fail -> PASS (shard-hsw) fdo#104676
Test perf:
Subgroup buffer-fill:
pass -> FAIL (shard-apl) fdo#103755
Subgroup blocking:
pass -> FAIL (shard-hsw) fdo#102252
Test perf_pmu:
Subgroup rc6:
skip -> PASS (shard-hsw)
Test kms_sysfs_edid_timing:
pass -> WARN (shard-apl) fdo#100047
Test pm_rps:
Subgroup min-max-config-loaded:
fail -> PASS (shard-apl) fdo#104060fdo#101623 https://bugs.freedesktop.org/show_bug.cgi?id=101623
fdo#102670 https://bugs.freedesktop.org/show_bug.cgi?id=102670
fdo#103355 https://bugs.freedesktop.org/show_bug.cgi?id=103355
fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#103928 https://bugs.freedesktop.org/show_bug.cgi?id=103928
fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#103375 https://bugs.freedesktop.org/show_bug.cgi?id=103375
fdo#104676 https://bugs.freedesktop.org/show_bug.cgi?id=104676
fdo#103755 https://bugs.freedesktop.org/show_bug.cgi?id=103755
fdo#102252 https://bugs.freedesktop.org/show_bug.cgi?id=102252
fdo#100047 https://bugs.freedesktop.org/show_bug.cgi?id=100047
fdo#104060 https://bugs.freedesktop.org/show_bug.cgi?id=104060
shard-apl total:3405 pass:1759 dwarn:1 dfail:0 fail:24 skip:1619 time:12542s shard-hsw total:3444 pass:1758 dwarn:1 dfail:0 fail:13 skip:1671 time:11822s shard-snb total:3444 pass:1350 dwarn:2 dfail:0 fail:10 skip:2082 time:6750s
Blacklisted hosts:
shard-kbl total:3444 pass:1895 dwarn:19 dfail:2 fail:22 skip:1506 time:9724s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_901/shards.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,v2,1/3] tests/perf_pmu: Use perf timestamps in a few more places (rev5)
In reply to Tvrtko Ursulin== Series Details ==
== Series Details ==
Series: series starting with [i-g-t,v2,1/3] tests/perf_pmu: Use perf timestamps in a few more places (rev5)
URL : https://patchwork.freedesktop.org/series/37874/
State : success
== Summary ==
IGT patchset tested on top of latest successful build 3f62e3da85b792ff74c0420e62f2d39a09ddcc1f tests/kms_rotation_crc: Test all pixel formats on all planes.
with latest DRM-Tip kernel build CI_DRM_37569c365b708180 drm-tip: 2018y-02m-12d-15h-35m-40s UTC integration manifest
No testlist changes.
fi-bdw-5557u total:288 pass:265 dwarn:0 dfail:0 fail:2 skip:21 time:441s fi-bdw-gvtdvm total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:432s fi-blb-e6850 total:288 pass:223 dwarn:1 dfail:0 fail:0 skip:64 time:377s fi-bsw-n3050 total:288 pass:242 dwarn:0 dfail:0 fail:0 skip:46 time:499s fi-bwr-2160 total:288 pass:183 dwarn:0 dfail:0 fail:0 skip:105 time:291s fi-bxt-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:486s fi-bxt-j4205 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:484s fi-byt-j1900 total:288 pass:253 dwarn:0 dfail:0 fail:0 skip:35 time:474s fi-byt-n2820 total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:463s fi-cfl-s2 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:577s fi-cnl-y3 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:592s fi-elk-e7500 total:288 pass:229 dwarn:0 dfail:0 fail:0 skip:59 time:417s fi-gdg-551 total:288 pass:179 dwarn:0 dfail:0 fail:1 skip:108 time:284s fi-glk-1 total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:512s fi-hsw-4770 total:288 pass:259 dwarn:0 dfail:0 fail:2 skip:27 time:412s fi-ilk-650 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:60 time:413s fi-ivb-3520m total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:448s fi-ivb-3770 total:288 pass:255 dwarn:0 dfail:0 fail:0 skip:33 time:413s fi-kbl-7500u total:288 pass:263 dwarn:1 dfail:0 fail:0 skip:24 time:461s fi-kbl-7560u total:288 pass:269 dwarn:0 dfail:0 fail:0 skip:19 time:499s fi-kbl-r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:500s fi-pnv-d510 total:288 pass:222 dwarn:1 dfail:0 fail:0 skip:65 time:595s fi-skl-6260u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:429s fi-skl-6600u total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:508s fi-skl-6700hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:529s fi-skl-6700k2 total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:495s fi-skl-6770hq total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:478s fi-skl-gvtdvm total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:23 time:432s fi-snb-2520m total:245 pass:211 dwarn:0 dfail:0 fail:0 skip:33 fi-snb-2600 total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:402s
Blacklisted hosts:
fi-glk-dsi total:117 pass:105 dwarn:0 dfail:0 fail:0 skip:12
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_902/issues.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,v2,1/3] tests/perf_pmu: Use perf timestamps in a few more places (rev5)
In reply to Tvrtko Ursulin== Series Details ==
== Series Details ==
Series: series starting with [i-g-t,v2,1/3] tests/perf_pmu: Use perf timestamps in a few more places (rev5)
URL : https://patchwork.freedesktop.org/series/37874/
State : success
== Summary ==
IGT patchset tested on top of latest successful build 3f62e3da85b792ff74c0420e62f2d39a09ddcc1f tests/kms_rotation_crc: Test all pixel formats on all planes.
with latest DRM-Tip kernel build CI_DRM_37569c365b708180 drm-tip: 2018y-02m-12d-15h-35m-40s UTC integration manifest
No testlist changes.
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-b:
pass -> INCOMPLETE (fi-bdw-5557u) fdo#104162fdo#104162 https://bugs.freedesktop.org/show_bug.cgi?id=104162
fi-bdw-5557u total:245 pass:227 dwarn:0 dfail:0 fail:0 skip:17 fi-bdw-gvtdvm total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:430s fi-blb-e6850 total:288 pass:223 dwarn:1 dfail:0 fail:0 skip:64 time:377s fi-bsw-n3050 total:288 pass:242 dwarn:0 dfail:0 fail:0 skip:46 time:493s fi-bwr-2160 total:288 pass:183 dwarn:0 dfail:0 fail:0 skip:105 time:289s fi-bxt-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:485s fi-bxt-j4205 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:486s fi-byt-j1900 total:288 pass:253 dwarn:0 dfail:0 fail:0 skip:35 time:478s fi-byt-n2820 total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:462s fi-cfl-s2 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:567s fi-cnl-y3 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:580s fi-elk-e7500 total:288 pass:229 dwarn:0 dfail:0 fail:0 skip:59 time:419s fi-gdg-551 total:288 pass:179 dwarn:0 dfail:0 fail:1 skip:108 time:292s fi-glk-1 total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:516s fi-hsw-4770 total:288 pass:259 dwarn:0 dfail:0 fail:2 skip:27 time:411s fi-ilk-650 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:60 time:417s fi-ivb-3520m total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:462s fi-ivb-3770 total:288 pass:255 dwarn:0 dfail:0 fail:0 skip:33 time:413s fi-kbl-7500u total:288 pass:263 dwarn:1 dfail:0 fail:0 skip:24 time:460s fi-kbl-7560u total:288 pass:269 dwarn:0 dfail:0 fail:0 skip:19 time:500s fi-kbl-r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:500s fi-pnv-d510 total:288 pass:222 dwarn:1 dfail:0 fail:0 skip:65 time:589s fi-skl-6260u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:430s fi-skl-6600u total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:516s fi-skl-6700hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:532s fi-skl-6700k2 total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:493s fi-skl-6770hq total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:475s fi-skl-gvtdvm total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:23 time:437s fi-snb-2520m total:245 pass:211 dwarn:0 dfail:0 fail:0 skip:33 fi-snb-2600 total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:407s
Blacklisted hosts:
fi-glk-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:470s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_903/issues.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✗ Fi.CI.IGT: failure for series starting with [i-g-t,v2,1/3] tests/perf_pmu: Use perf timestamps in a few more places (rev5)
In reply to Tvrtko Ursulin== Series Details ==
== Series Details ==
Series: series starting with [i-g-t,v2,1/3] tests/perf_pmu: Use perf timestamps in a few more places (rev5)
URL : https://patchwork.freedesktop.org/series/37874/
State : failure
== Summary ==
Test pm_rpm:
Subgroup modeset-non-lpsp:
fail -> PASS (shard-hsw)
Subgroup gem-execbuf:
fail -> PASS (shard-hsw)
Test perf:
Subgroup enable-disable:
pass -> FAIL (shard-apl) fdo#103715
Subgroup blocking:
pass -> FAIL (shard-hsw) fdo#102252
Test kms_vblank:
Subgroup pipe-c-ts-continuation-dpms-rpm:
fail -> PASS (shard-hsw)
Test kms_flip:
Subgroup 2x-flip-vs-expired-vblank-interruptible:
pass -> FAIL (shard-hsw) fdo#102887
Subgroup dpms-vs-vblank-race:
pass -> FAIL (shard-apl) fdo#103060 +2
Test gem_eio:
Subgroup in-flight-external:
fail -> PASS (shard-hsw) fdo#104676 +1
Test kms_rotation_crc:
Subgroup sprite-rotation-180:
pass -> FAIL (shard-apl)fdo#103715 https://bugs.freedesktop.org/show_bug.cgi?id=103715
fdo#102252 https://bugs.freedesktop.org/show_bug.cgi?id=102252
fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#104676 https://bugs.freedesktop.org/show_bug.cgi?id=104676
shard-apl total:3351 pass:1731 dwarn:1 dfail:0 fail:23 skip:1595 time:13565s shard-hsw total:3427 pass:1717 dwarn:1 dfail:0 fail:54 skip:1654 time:14802s shard-snb total:3427 pass:1349 dwarn:1 dfail:0 fail:10 skip:2067 time:7708s
Blacklisted hosts:
shard-kbl total:3427 pass:1906 dwarn:1 dfail:0 fail:21 skip:1499 time:11032s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_902/shards.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✗ Fi.CI.IGT: failure for series starting with [i-g-t,v2,1/3] tests/perf_pmu: Use perf timestamps in a few more places (rev5)
In reply to Tvrtko Ursulin== Series Details ==
== Series Details ==
Series: series starting with [i-g-t,v2,1/3] tests/perf_pmu: Use perf timestamps in a few more places (rev5)
URL : https://patchwork.freedesktop.org/series/37874/
State : failure
== Summary ==
Test gem_softpin:
Subgroup noreloc-s3:
pass -> SKIP (shard-snb) fdo#103375
Test kms_flip:
Subgroup 2x-plain-flip-fb-recreate:
pass -> FAIL (shard-hsw) fdo#100368
Subgroup flip-vs-expired-vblank:
pass -> FAIL (shard-apl) fdo#102887
Subgroup modeset-vs-vblank-race:
fail -> PASS (shard-hsw) fdo#103060
Test pm_rpm:
Subgroup modeset-stress-extra-wait:
fail -> PASS (shard-hsw)
Test kms_vblank:
Subgroup pipe-c-ts-continuation-dpms-rpm:
fail -> PASS (shard-hsw)
Test gem_eio:
Subgroup in-flight-external:
fail -> PASS (shard-hsw) fdo#104676 +1
Test pm_rc6_residency:
Subgroup rc6-accuracy:
skip -> PASS (shard-snb)
Test kms_rotation_crc:
Subgroup sprite-rotation-180:
pass -> FAIL (shard-snb)
Test gem_linear_blits:
Subgroup interruptible:
pass -> SKIP (shard-apl)fdo#103375 https://bugs.freedesktop.org/show_bug.cgi?id=103375
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#104676 https://bugs.freedesktop.org/show_bug.cgi?id=104676
shard-apl total:3338 pass:1730 dwarn:1 dfail:0 fail:20 skip:1586 time:13781s shard-hsw total:3427 pass:1716 dwarn:1 dfail:0 fail:55 skip:1654 time:14776s shard-snb total:3427 pass:1348 dwarn:1 dfail:0 fail:11 skip:2067 time:7639s
Blacklisted hosts:
shard-kbl total:3427 pass:1907 dwarn:1 dfail:0 fail:21 skip:1498 time:11025s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_903/shards.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev