lib/igt_kms: Add functions to get only a single output for a pipe.
PATCH 1/4 lib/igt_kms: Add functions to get only a single output for a pipe.
igt_get_single_output_for_pipe() will give a valid output for a pipe, for_each_pipe_with_single_output will iterate over all pipes, and will be called for each pipe with an output once.
--- lib/igt_kms.c | 93 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ lib/igt_kms.h | 26 +++++++++++++++++ 2 files changed, 119 insertions(+)
lib/igt_kms.c +93 -0
@@ -2195,6 +2195,99 @@ igt_plane_t *igt_pipe_get_plane_type(igt_pipe_t *pipe, int plane_type)return &pipe->planes[plane_idx]; } +static bool output_is_internal_panel (igt_output_t *output) +{ +switch (output->config.connector->connector_type) { +case DRM_MODE_CONNECTOR_LVDS : +case DRM_MODE_CONNECTOR_eDP: +case DRM_MODE_CONNECTOR_DSI : +case DRM_MODE_CONNECTOR_DPI : +return true; +default : +return false; + } +} + +igt_output_t **__igt_pipe_populate_outputs (igt_display_t *display,igt_output_t **chosen_outputs) +{ +unsigned full_pipe_mask = (1 << (display->n_pipes)) -1 , assigned_pipes =0 ; +igt_output_t *output; +int i, j; + +memset (chosen_outputs,0 ,sizeof (*chosen_outputs) * display->n_pipes); + +/* +* Try to assign all outputs to the first available CRTC for +* it, start with the outputs restricted to 1 pipe, then increase +* number of pipes until we assign connectors to all pipes. +*/ +for (i =0 ; i <= display->n_pipes; i++) { +for_each_connected_output (display, output) { +uint32_t pipe_mask = output->config.valid_crtc_idx_mask & full_pipe_mask; +bool found = false; + +if (output_is_internal_panel (output)) { +/* +* Internal panel should be assigned to pipe A +* if possible, so make sure they're enumerated +* first. +*/ + +if (i) +continue ; + }else if (__builtin_popcount (pipe_mask) != i) +continue ; + +for (j =0 ; j < display->n_pipes; j++) { +bool pipe_assigned = assigned_pipes & (1 << j); + +if (pipe_assigned || !(pipe_mask & (1 << j))) +continue ; + +if (!found) { +/* We found an unassigned pipe, use it! */ + found = true; + assigned_pipes |=1 << j; + chosen_outputs[j] = output; + }else if (!chosen_outputs[j] || +/* +* Overwrite internal panel if not assigned, +* external outputs are faster to do modesets +*/ +output_is_internal_panel (chosen_outputs[j])) + chosen_outputs[j] = output; + } + +if (!found) +igt_warn ("Output %s could not be assigned to a pipe\n" , +igt_output_name (output)); + } + } + +return chosen_outputs; +} + +/** +* igt_get_single_output_for_pipe: +* @display: a pointer to an #igt_display_t structure +* @pipe: The pipe for which an #igt_output_t must be returned. +* +* Get a compatible output for a pipe. +* +* Returns: A compatible output for a given pipe, or NULL. +*/ +igt_output_t *igt_get_single_output_for_pipe (igt_display_t *display,enum pipe pipe) +{ +igt_output_t *chosen_outputs[display->n_pipes]; + +igt_assert (pipe !=PIPE_NONE ); +igt_require (pipe < display->n_pipes); + +__igt_pipe_populate_outputs (display, chosen_outputs); + +return chosen_outputs[pipe]; +} +static igt_output_t *igt_pipe_get_output (igt_pipe_t *pipe) {igt_display_t *display = pipe->display;
lib/igt_kms.h +26 -0
@@ -380,7 +380,9 @@ igt_plane_t *igt_output_get_plane(igt_output_t *output, int plane_idx);igt_plane_t *igt_output_get_plane_type (igt_output_t *output,int plane_type);igt_output_t *igt_output_from_connector (igt_display_t *display,drmModeConnector *connector); +igt_plane_t *igt_pipe_get_plane_type (igt_pipe_t *pipe,int plane_type); +igt_output_t *igt_get_single_output_for_pipe (igt_display_t *display,enum pipe pipe);void igt_pipe_request_out_fence (igt_pipe_t *pipe);
@@ -468,6 +470,10 @@ static inline bool igt_output_is_connected(igt_output_t *output)* * This for loop is called over all connected outputs. This function * will try every combination of @pipe and @output. +* +* If you only need to test a single output for each pipe, use +* for_each_pipe_with_single_output(), if you only need an +* output for a single pipe, use igt_get_single_output_for_pipe(). */ #define for_each_pipe_with_valid_output (display, pipe, output) \ for (int con__ = (pipe) = 0; \
@@ -476,6 +482,26 @@ static inline bool igt_output_is_connected(igt_output_t *output)for_each_if ((((output) = &(display)->outputs[con__]), \ igt_pipe_connector_valid((pipe), (output)))) +igt_output_t **__igt_pipe_populate_outputs (igt_display_t *display, +igt_output_t **chosen_outputs); + +/** +* for_each_pipe_with_single_output: +* @display: a pointer to an #igt_display_t structure +* @pipe: The pipe for which this @pipe / @output combination is valid. +* @output: The output for which this @pipe / @output combination is valid. +* +* This loop is called over all pipes, and will try to find a compatible output +* for each pipe. Unlike for_each_pipe_with_valid_output(), this function will +* be called at most once for each pipe. +*/ +#define for_each_pipe_with_single_output (display, pipe, output) \ + for (igt_output_t *__outputs[(display)->n_pipes], \ + **__output = __igt_pipe_populate_outputs((display), __outputs); \ + __output < &__outputs[(display)->n_pipes]; __output++) \ + for_each_if (*__output && \ + ((pipe) = (__outputs - __output), (output) = *__output, 1)) +/** * for_each_valid_output_on_pipe: * @display: a pointer to an #igt_display_t structure
Signature · 6 lines
2.16.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 2/4 tests/kms_rmfb: Use for_each_pipe_with_single_output.
A single output on every pipe will do for testing.
--- tests/kms_rmfb.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
tests/kms_rmfb.c +2 -6
@@ -129,15 +129,10 @@ static void run_rmfb_test(struct rmfb_data *data, bool reopen) {igt_output_t *output; -int valid_tests =0 ;enum pipe pipe; -for_each_pipe_with_valid_output (&data->display, pipe, output) { +for_each_pipe_with_single_output (&data->display, pipe, output)test_rmfb (data, output, pipe, reopen); - valid_tests =1 ; - } - -igt_require_f (valid_tests,"no valid crtc/connector combinations found\n" ); } igt_main
@@ -152,6 +147,7 @@ igt_mainkmstest_set_vt_graphics_mode ();igt_display_init (&data.display, data.drm_fd); +igt_display_require_output (&data.display); }igt_subtest_f ("rmfb-ioctl" )
Signature · 6 lines
2.16.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 3/4 tests/kms_busy: Convert to using igt_get_single_output_for_pipe.
In reply to Maarten LankhorstPut a single igt_display_require_output_on_pipe in the fixture, so we know we always have an output on the pipe and can always assume it's not NULL.
--- tests/kms_busy.c | 38 +++++++++++++++----------------------- 1 file changed, 15 insertions(+), 23 deletions(-)
tests/kms_busy.c +15 -23
@@ -35,31 +35,23 @@ IGT_TEST_DESCRIPTION("Basic check of KMS ABI with busy framebuffers.");static igt_output_t *set_fb_on_crtc (igt_display_t *dpy,int pipe,struct igt_fb *fb) { +drmModeModeInfoPtr mode; +igt_plane_t *primary;igt_output_t *output; -for_each_valid_output_on_pipe (dpy, pipe, output) { -drmModeModeInfoPtr mode; -igt_plane_t *primary; - -if (output->pending_pipe !=PIPE_NONE ) -continue ; - -igt_output_set_pipe (output, pipe); - mode =igt_output_get_mode (output); + output =igt_get_single_output_for_pipe (dpy, pipe); -igt_create_pattern_fb (dpy->drm_fd, - mode->hdisplay, mode->vdisplay, -DRM_FORMAT_XRGB8888 , -LOCAL_I915_FORMAT_MOD_X_TILED , - fb); +igt_output_set_pipe (output, pipe); + mode =igt_output_get_mode (output); - primary =igt_output_get_plane_type (output,DRM_PLANE_TYPE_PRIMARY ); -igt_plane_set_fb (primary, fb); +igt_create_pattern_fb (dpy->drm_fd, mode->hdisplay, mode->vdisplay, +DRM_FORMAT_XRGB8888 , +LOCAL_I915_FORMAT_MOD_X_TILED , fb); -return output; - } + primary =igt_output_get_plane_type (output,DRM_PLANE_TYPE_PRIMARY ); +igt_plane_set_fb (primary, fb); -return NULL ; +return output; }static void do_cleanup_display (igt_display_t *dpy)
@@ -168,7 +160,7 @@ static void test_flip(igt_display_t *dpy, unsigned ring, int pipe, bool modeset)signal (SIGALRM , sighandler); -igt_require ((output =set_fb_on_crtc (dpy, pipe, &fb[0 ]))); + output =set_fb_on_crtc (dpy, pipe, &fb[0 ]);igt_display_commit2 (dpy,COMMIT_LEGACY ); igt_create_pattern_fb(dpy->drm_fd,
@@ -246,7 +238,7 @@ static void test_hang(igt_display_t *dpy, unsigned ring,igt_output_t *output;igt_plane_t *primary; -igt_require ((output =set_fb_on_crtc (dpy, pipe, &fb[0 ]))); + output =set_fb_on_crtc (dpy, pipe, &fb[0 ]);igt_display_commit2 (dpy,COMMIT_ATOMIC ); primary =igt_output_get_plane_type (output,DRM_PLANE_TYPE_PRIMARY );
@@ -290,7 +282,7 @@ static void test_pageflip_modeset_hang(igt_display_t *dpy,igt_plane_t *primary;igt_spin_t *t; -igt_require ((output =set_fb_on_crtc (dpy, pipe, &fb))); + output =set_fb_on_crtc (dpy, pipe, &fb); primary =igt_output_get_plane_type (output,DRM_PLANE_TYPE_PRIMARY );igt_display_commit2 (dpy, dpy->is_atomic ?COMMIT_ATOMIC :COMMIT_LEGACY );
@@ -337,7 +329,7 @@ igt_main errno =0 ; igt_fixture { -igt_skip_on (n >= display.n_pipes); +igt_display_require_output_on_pipe (&display, n); } igt_subtest_f("basic-flip-%s",
Signature · 6 lines
2.16.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 4/4 tests/kms_chv_cursor_fail: Reorder tests, and use igt_display_require_output_on_pipe.
In reply to Maarten LankhorstThis test is purely about the pipe fifo underrun, so not all outputs need to be tested. Reorder the tests to run per pipe first, this will save a modeset for all different sizes when the tests are run per-binary, and another modeset on each subtest when more than 1 output is connected.
--- tests/kms_chv_cursor_fail.c | 85 ++++++++++++++++++--------------------------- 1 file changed, 34 insertions(+), 51 deletions(-)
tests/kms_chv_cursor_fail.c +34 -51
@@ -246,7 +246,7 @@ static void prepare_crtc(data_t *data) primary =igt_output_get_plane_type (data->output,DRM_PLANE_TYPE_PRIMARY );igt_plane_set_fb (primary, &data->primary_fb); -igt_display_commit (display); +igt_display_commit2 (display, display->is_atomic ?COMMIT_ATOMIC :COMMIT_LEGACY ); data->jump_x = (mode->hdisplay - data->curw) /2 ; data->jump_y = (mode->vdisplay - data->curh) /2 ;
@@ -262,34 +262,15 @@ static void prepare_crtc(data_t *data)static void test_crtc (data_t *data,unsigned int edges) { -igt_display_t *display = &data->display; -int valid_tests =0 ; -cleanup_crtc (data);create_cursor_fb (data, data->curw, data->curh); -for_each_valid_output_on_pipe (display, data->pipe, data->output) { -prepare_crtc (data); - - valid_tests++; - -igt_info ("Beginning %s on pipe %s, connector %s\n" , -igt_subtest_name (), -kmstest_pipe_name (data->pipe), -igt_output_name (data->output)); +prepare_crtc (data); -test_edges (data, edges); - -igt_info ("\n%s on pipe %s, connector %s: PASSED\n\n" , -igt_subtest_name (), -kmstest_pipe_name (data->pipe), -igt_output_name (data->output)); - } +test_edges (data, edges);igt_remove_fb (data->drm_fd, &data->fb); - -igt_require_f (valid_tests,"no valid crtc/connector combinations found\n" ); }static int opt_handler (int opt,int opt_index,void *_data)
@@ -354,36 +335,38 @@ int main(int argc, char **argv)igt_display_init (&data.display, data.drm_fd); } -for (data.curw =64 ; data.curw <=256 ; data.curw *=2 ) { - data.curh = data.curw; -for (data.pipe =PIPE_A ; data.pipe <=PIPE_C ; data.pipe++) { -igt_subtest_f ("pipe-%s-%dx%d-left-edge" , -kmstest_pipe_name (data.pipe), - data.curw, data.curh) { -igt_require (data.pipe < data.display.n_pipes); -igt_require (data.curw <= max_curw && data.curh <= max_curh); -test_crtc (&data,EDGE_LEFT ); - } -igt_subtest_f ("pipe-%s-%dx%d-right-edge" , -kmstest_pipe_name (data.pipe), - data.curw, data.curh) { -igt_require (data.pipe < data.display.n_pipes); -igt_require (data.curw <= max_curw && data.curh <= max_curh); -test_crtc (&data,EDGE_RIGHT ); +for_each_pipe_static (data.pipe) { + igt_subtest_group { + igt_fixture { +igt_display_require_output_on_pipe (&data.display, data.pipe); + data.output =igt_get_single_output_for_pipe (&data.display, data.pipe); } -igt_subtest_f ("pipe-%s-%dx%d-top-edge" , -kmstest_pipe_name (data.pipe), - data.curw, data.curh) { -igt_require (data.pipe < data.display.n_pipes); -igt_require (data.curw <= max_curw && data.curh <= max_curh); -test_crtc (&data,EDGE_TOP ); - } -igt_subtest_f ("pipe-%s-%dx%d-bottom-edge" , -kmstest_pipe_name (data.pipe), - data.curw, data.curh) { -igt_require (data.pipe < data.display.n_pipes); -igt_require (data.curw <= max_curw && data.curh <= max_curh); -test_crtc (&data,EDGE_BOTTOM ); + +for (data.curw =64 ; data.curw <=256 ; data.curw *=2 ) { + data.curh = data.curw; + +igt_fixture + igt_require(data.curw <= max_curw && data.curh <= max_curh); + +igt_subtest_f ("pipe-%s-%dx%d-left-edge" , +kmstest_pipe_name (data.pipe), + data.curw, data.curh) +test_crtc (&data,EDGE_LEFT ); + +igt_subtest_f ("pipe-%s-%dx%d-right-edge" , +kmstest_pipe_name (data.pipe), + data.curw, data.curh) +test_crtc (&data,EDGE_RIGHT ); + +igt_subtest_f ("pipe-%s-%dx%d-top-edge" , +kmstest_pipe_name (data.pipe), + data.curw, data.curh) +test_crtc (&data,EDGE_TOP ); + +igt_subtest_f ("pipe-%s-%dx%d-bottom-edge" , +kmstest_pipe_name (data.pipe), + data.curw, data.curh) +test_crtc (&data,EDGE_BOTTOM ); } } }
Signature · 6 lines
2.16.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✗ Fi.CI.BAT: failure for series starting with [i-g-t,1/4] lib/igt_kms: Add functions to get only a single output for a pipe.
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: series starting with [i-g-t,1/4] lib/igt_kms: Add functions to get only a single output for a pipe.
URL : https://patchwork.freedesktop.org/series/38687/
State : failure
== Summary ==
IGT patchset tested on top of latest successful build 960e55a87d7b7d7385063e37cc9f281df2be8037 igt/gem_ctx_isolation: Check isolation of registers between contexts
with latest DRM-Tip kernel build CI_DRM_381642d073db2a85 drm-tip: 2018y-02m-21d-14h-03m-58s UTC integration manifest
Testlist changes:
+igt@kms_chv_cursor_fail@pipe-d-64x64-bottom-edge +igt@kms_chv_cursor_fail@pipe-d-64x64-left-edge +igt@kms_chv_cursor_fail@pipe-d-64x64-right-edge +igt@kms_chv_cursor_fail@pipe-d-64x64-top-edge +igt@kms_chv_cursor_fail@pipe-d-128x128-bottom-edge +igt@kms_chv_cursor_fail@pipe-d-128x128-left-edge +igt@kms_chv_cursor_fail@pipe-d-128x128-right-edge +igt@kms_chv_cursor_fail@pipe-d-128x128-top-edge +igt@kms_chv_cursor_fail@pipe-d-256x256-bottom-edge +igt@kms_chv_cursor_fail@pipe-d-256x256-left-edge +igt@kms_chv_cursor_fail@pipe-d-256x256-right-edge +igt@kms_chv_cursor_fail@pipe-d-256x256-top-edge +igt@kms_chv_cursor_fail@pipe-e-64x64-bottom-edge +igt@kms_chv_cursor_fail@pipe-e-64x64-left-edge +igt@kms_chv_cursor_fail@pipe-e-64x64-right-edge +igt@kms_chv_cursor_fail@pipe-e-64x64-top-edge +igt@kms_chv_cursor_fail@pipe-e-128x128-bottom-edge +igt@kms_chv_cursor_fail@pipe-e-128x128-left-edge +igt@kms_chv_cursor_fail@pipe-e-128x128-right-edge +igt@kms_chv_cursor_fail@pipe-e-128x128-top-edge +igt@kms_chv_cursor_fail@pipe-e-256x256-bottom-edge +igt@kms_chv_cursor_fail@pipe-e-256x256-left-edge +igt@kms_chv_cursor_fail@pipe-e-256x256-right-edge +igt@kms_chv_cursor_fail@pipe-e-256x256-top-edge +igt@kms_chv_cursor_fail@pipe-f-64x64-bottom-edge +igt@kms_chv_cursor_fail@pipe-f-64x64-left-edge +igt@kms_chv_cursor_fail@pipe-f-64x64-right-edge +igt@kms_chv_cursor_fail@pipe-f-64x64-top-edge +igt@kms_chv_cursor_fail@pipe-f-128x128-bottom-edge +igt@kms_chv_cursor_fail@pipe-f-128x128-left-edge +igt@kms_chv_cursor_fail@pipe-f-128x128-right-edge +igt@kms_chv_cursor_fail@pipe-f-128x128-top-edge +igt@kms_chv_cursor_fail@pipe-f-256x256-bottom-edge +igt@kms_chv_cursor_fail@pipe-f-256x256-left-edge +igt@kms_chv_cursor_fail@pipe-f-256x256-right-edge +igt@kms_chv_cursor_fail@pipe-f-256x256-top-edge
Test gem_exec_suspend:
Subgroup basic-s4-devices:
pass -> INCOMPLETE (fi-skl-guc)
Test gem_mmap_gtt:
Subgroup basic-small-bo-tiledx:
pass -> FAIL (fi-gdg-551) fdo#102575
Test kms_busy:
Subgroup basic-flip-c:
pass -> SKIP (fi-bsw-n3050)
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-a:
fail -> PASS (fi-ivb-3520m)
Subgroup suspend-read-crc-pipe-b:
incomplete -> PASS (fi-snb-2520m) fdo#103713
fail -> PASS (fi-ivb-3520m)
Subgroup suspend-read-crc-pipe-c:
fail -> PASS (fi-ivb-3520m)fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fi-bdw-5557u total:288 pass:267 dwarn:0 dfail:0 fail:0 skip:21 time:419s fi-bdw-gvtdvm total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:423s fi-blb-e6850 total:288 pass:223 dwarn:1 dfail:0 fail:0 skip:64 time:374s fi-bsw-n3050 total:288 pass:241 dwarn:0 dfail:0 fail:0 skip:47 time:485s fi-bwr-2160 total:288 pass:183 dwarn:0 dfail:0 fail:0 skip:105 time:286s fi-bxt-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:479s fi-bxt-j4205 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:486s fi-byt-j1900 total:288 pass:253 dwarn:0 dfail:0 fail:0 skip:35 time:469s fi-byt-n2820 total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:466s fi-cfl-s2 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:562s fi-elk-e7500 total:288 pass:229 dwarn:0 dfail:0 fail:0 skip:59 time:418s fi-gdg-551 total:288 pass:179 dwarn:0 dfail:0 fail:1 skip:108 time:286s fi-glk-1 total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:513s fi-hsw-4770 total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:387s fi-ilk-650 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:60 time:411s fi-ivb-3520m total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:449s fi-ivb-3770 total:288 pass:255 dwarn:0 dfail:0 fail:0 skip:33 time:413s fi-kbl-7500u total:288 pass:263 dwarn:1 dfail:0 fail:0 skip:24 time:455s fi-kbl-7560u total:288 pass:269 dwarn:0 dfail:0 fail:0 skip:19 time:483s fi-kbl-7567u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:451s fi-kbl-r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:493s fi-pnv-d510 total:288 pass:222 dwarn:1 dfail:0 fail:0 skip:65 time:590s fi-skl-6260u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:431s fi-skl-6600u total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:504s fi-skl-6700hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:525s fi-skl-6700k2 total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:487s fi-skl-6770hq total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:472s fi-skl-guc total:109 pass:97 dwarn:0 dfail:0 fail:0 skip:11 fi-skl-gvtdvm total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:23 time:429s fi-snb-2520m total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:531s fi-snb-2600 total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:392s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_970/issues.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✗ Fi.CI.BAT: warning for series starting with [i-g-t,1/4] lib/igt_kms: Add functions to get only a single output for a pipe.
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: series starting with [i-g-t,1/4] lib/igt_kms: Add functions to get only a single output for a pipe.
URL : https://patchwork.freedesktop.org/series/38687/
State : warning
== Summary ==
IGT patchset tested on top of latest successful build ec872b7dc1fe68d153aaceaf74d55865719a76da tests/perf_pmu: Handle CPU hotplug failures better
with latest DRM-Tip kernel build CI_DRM_3868c07ef2c77d14 drm-tip: 2018y-03m-03d-08h-39m-05s UTC integration manifest
Testlist changes:
+igt@kms_chv_cursor_fail@pipe-d-64x64-bottom-edge +igt@kms_chv_cursor_fail@pipe-d-64x64-left-edge +igt@kms_chv_cursor_fail@pipe-d-64x64-right-edge +igt@kms_chv_cursor_fail@pipe-d-64x64-top-edge +igt@kms_chv_cursor_fail@pipe-d-128x128-bottom-edge +igt@kms_chv_cursor_fail@pipe-d-128x128-left-edge +igt@kms_chv_cursor_fail@pipe-d-128x128-right-edge +igt@kms_chv_cursor_fail@pipe-d-128x128-top-edge +igt@kms_chv_cursor_fail@pipe-d-256x256-bottom-edge +igt@kms_chv_cursor_fail@pipe-d-256x256-left-edge +igt@kms_chv_cursor_fail@pipe-d-256x256-right-edge +igt@kms_chv_cursor_fail@pipe-d-256x256-top-edge +igt@kms_chv_cursor_fail@pipe-e-64x64-bottom-edge +igt@kms_chv_cursor_fail@pipe-e-64x64-left-edge +igt@kms_chv_cursor_fail@pipe-e-64x64-right-edge +igt@kms_chv_cursor_fail@pipe-e-64x64-top-edge +igt@kms_chv_cursor_fail@pipe-e-128x128-bottom-edge +igt@kms_chv_cursor_fail@pipe-e-128x128-left-edge +igt@kms_chv_cursor_fail@pipe-e-128x128-right-edge +igt@kms_chv_cursor_fail@pipe-e-128x128-top-edge +igt@kms_chv_cursor_fail@pipe-e-256x256-bottom-edge +igt@kms_chv_cursor_fail@pipe-e-256x256-left-edge +igt@kms_chv_cursor_fail@pipe-e-256x256-right-edge +igt@kms_chv_cursor_fail@pipe-e-256x256-top-edge +igt@kms_chv_cursor_fail@pipe-f-64x64-bottom-edge +igt@kms_chv_cursor_fail@pipe-f-64x64-left-edge +igt@kms_chv_cursor_fail@pipe-f-64x64-right-edge +igt@kms_chv_cursor_fail@pipe-f-64x64-top-edge +igt@kms_chv_cursor_fail@pipe-f-128x128-bottom-edge +igt@kms_chv_cursor_fail@pipe-f-128x128-left-edge +igt@kms_chv_cursor_fail@pipe-f-128x128-right-edge +igt@kms_chv_cursor_fail@pipe-f-128x128-top-edge +igt@kms_chv_cursor_fail@pipe-f-256x256-bottom-edge +igt@kms_chv_cursor_fail@pipe-f-256x256-left-edge +igt@kms_chv_cursor_fail@pipe-f-256x256-right-edge +igt@kms_chv_cursor_fail@pipe-f-256x256-top-edge
---- Possible new issues:
Test kms_busy:
Subgroup basic-flip-c:
pass -> SKIP (fi-bsw-n3050)---- Known issues:
Test debugfs_test:
Subgroup read_all_entries:
incomplete -> PASS (fi-snb-2520m) fdo#103713
Test gem_mmap_gtt:
Subgroup basic-small-bo-tiledx:
pass -> FAIL (fi-gdg-551) fdo#102575
Test kms_chamelium:
Subgroup dp-edid-read:
fail -> PASS (fi-kbl-7500u) fdo#102505fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
fdo#102505 https://bugs.freedesktop.org/show_bug.cgi?id=102505
fi-bdw-5557u total:288 pass:267 dwarn:0 dfail:0 fail:0 skip:21 time:415s fi-bdw-gvtdvm total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:432s fi-blb-e6850 total:288 pass:223 dwarn:1 dfail:0 fail:0 skip:64 time:373s fi-bsw-n3050 total:288 pass:241 dwarn:0 dfail:0 fail:0 skip:47 time:493s fi-bwr-2160 total:288 pass:183 dwarn:0 dfail:0 fail:0 skip:105 time:279s fi-bxt-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:481s fi-bxt-j4205 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:489s fi-byt-j1900 total:288 pass:253 dwarn:0 dfail:0 fail:0 skip:35 time:470s fi-byt-n2820 total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:457s fi-cfl-8700k total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:400s fi-cfl-s2 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:565s fi-elk-e7500 total:288 pass:229 dwarn:0 dfail:0 fail:0 skip:59 time:412s fi-gdg-551 total:288 pass:179 dwarn:0 dfail:0 fail:1 skip:108 time:289s fi-glk-1 total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:507s fi-hsw-4770 total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:387s fi-ilk-650 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:60 time:407s fi-ivb-3520m total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:446s fi-ivb-3770 total:288 pass:255 dwarn:0 dfail:0 fail:0 skip:33 time:412s fi-kbl-7500u total:288 pass:263 dwarn:1 dfail:0 fail:0 skip:24 time:450s fi-kbl-7560u total:288 pass:269 dwarn:0 dfail:0 fail:0 skip:19 time:493s fi-kbl-7567u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:448s fi-kbl-r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:501s fi-pnv-d510 total:288 pass:222 dwarn:1 dfail:0 fail:0 skip:65 time:585s fi-skl-6260u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:422s fi-skl-6600u total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:504s fi-skl-6700hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:518s fi-skl-6700k2 total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:491s fi-skl-6770hq total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:478s fi-skl-guc total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:407s fi-skl-gvtdvm total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:23 time:430s fi-snb-2520m total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:518s fi-snb-2600 total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:392s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_1053/issues.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev