Skip to contentSkip to conversation

lib/igt_kms: Add functions to get only a single output for a pipe.

PATCH New Maarten Lankhorst 2 participants 6 messages Feb 21, 2018 – Mar 5, 2018 Library code

lore
Share & tools
lore
#0 lore raw

PATCH 1/4 lib/igt_kms: Add functions to get only a single output for a pipe.

igt_get_single_output_for_pipe() will give a valid output for a pipe, for_each_pipe_with_single_output will iterate over all pipes, and will be called for each pipe with an output once.

---
 lib/igt_kms.c | 93 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 lib/igt_kms.h | 26 +++++++++++++++++
 2 files changed, 119 insertions(+)
lib/igt_kms.c +93 -0
index 8c10eb5b67e9..6148d32beef6 100644
@@ -2195,6 +2195,99 @@ igt_plane_t *igt_pipe_get_plane_type(igt_pipe_t *pipe, int plane_type)
 	return &pipe->planes[plane_idx];
 }
 
+static bool output_is_internal_panel(igt_output_t *output)
+{
+	switch (output->config.connector->connector_type) {
+	case DRM_MODE_CONNECTOR_LVDS:
+	case DRM_MODE_CONNECTOR_eDP:
+	case DRM_MODE_CONNECTOR_DSI:
+	case DRM_MODE_CONNECTOR_DPI:
+		return true;
+	default:
+		return false;
+	}
+}
+
+igt_output_t **__igt_pipe_populate_outputs(igt_display_t *display, igt_output_t **chosen_outputs)
+{
+	unsigned full_pipe_mask = (1 << (display->n_pipes)) - 1, assigned_pipes = 0;
+	igt_output_t *output;
+	int i, j;
+
+	memset(chosen_outputs, 0, sizeof(*chosen_outputs) * display->n_pipes);
+
+	/*
+	 * Try to assign all outputs to the first available CRTC for
+	 * it, start with the outputs restricted to 1 pipe, then increase
+	 * number of pipes until we assign connectors to all pipes.
+	 */
+	for (i = 0; i <= display->n_pipes; i++) {
+		for_each_connected_output(display, output) {
+			uint32_t pipe_mask = output->config.valid_crtc_idx_mask & full_pipe_mask;
+			bool found = false;
+
+			if (output_is_internal_panel(output)) {
+				/*
+				 * Internal panel should be assigned to pipe A
+				 * if possible, so make sure they're enumerated
+				 * first.
+				 */
+
+				if (i)
+					continue;
+			} else if (__builtin_popcount(pipe_mask) != i)
+				continue;
+
+			for (j = 0; j < display->n_pipes; j++) {
+				bool pipe_assigned = assigned_pipes & (1 << j);
+
+				if (pipe_assigned || !(pipe_mask & (1 << j)))
+					continue;
+
+				if (!found) {
+					/* We found an unassigned pipe, use it! */
+					found = true;
+					assigned_pipes |= 1 << j;
+					chosen_outputs[j] = output;
+				} else if (!chosen_outputs[j] ||
+					   /*
+					    * Overwrite internal panel if not assigned,
+					    * external outputs are faster to do modesets
+					    */
+					   output_is_internal_panel(chosen_outputs[j]))
+					chosen_outputs[j] = output;
+			}
+
+			if (!found)
+				igt_warn("Output %s could not be assigned to a pipe\n",
+					 igt_output_name(output));
+		}
+	}
+
+	return chosen_outputs;
+}
+
+/**
+ * igt_get_single_output_for_pipe:
+ * @display: a pointer to an #igt_display_t structure
+ * @pipe: The pipe for which an #igt_output_t must be returned.
+ *
+ * Get a compatible output for a pipe.
+ *
+ * Returns: A compatible output for a given pipe, or NULL.
+ */
+igt_output_t *igt_get_single_output_for_pipe(igt_display_t *display, enum pipe pipe)
+{
+	igt_output_t *chosen_outputs[display->n_pipes];
+
+	igt_assert(pipe != PIPE_NONE);
+	igt_require(pipe < display->n_pipes);
+
+	__igt_pipe_populate_outputs(display, chosen_outputs);
+
+	return chosen_outputs[pipe];
+}
+
 static igt_output_t *igt_pipe_get_output(igt_pipe_t *pipe)
 {
 	igt_display_t *display = pipe->display;
lib/igt_kms.h +26 -0
index eb147152128a..8654d45e6603 100644
@@ -380,7 +380,9 @@ igt_plane_t *igt_output_get_plane(igt_output_t *output, int plane_idx);
 igt_plane_t *igt_output_get_plane_type(igt_output_t *output, int plane_type);
 igt_output_t *igt_output_from_connector(igt_display_t *display,
     drmModeConnector *connector);
+
 igt_plane_t *igt_pipe_get_plane_type(igt_pipe_t *pipe, int plane_type);
+igt_output_t *igt_get_single_output_for_pipe(igt_display_t *display, enum pipe pipe);
 
 void igt_pipe_request_out_fence(igt_pipe_t *pipe);
 
@@ -468,6 +470,10 @@ static inline bool igt_output_is_connected(igt_output_t *output)
  *
  * This for loop is called over all connected outputs. This function
  * will try every combination of @pipe and @output.
+ *
+ * If you only need to test a single output for each pipe, use
+ * for_each_pipe_with_single_output(), if you only need an
+ * output for a single pipe, use igt_get_single_output_for_pipe().
  */
 #define for_each_pipe_with_valid_output(display, pipe, output) \
 	for (int con__ = (pipe) = 0; \
@@ -476,6 +482,26 @@ static inline bool igt_output_is_connected(igt_output_t *output)
 		for_each_if ((((output) = &(display)->outputs[con__]), \
 			     igt_pipe_connector_valid((pipe), (output))))
 
+igt_output_t **__igt_pipe_populate_outputs(igt_display_t *display,
+					   igt_output_t **chosen_outputs);
+
+/**
+ * for_each_pipe_with_single_output:
+ * @display: a pointer to an #igt_display_t structure
+ * @pipe: The pipe for which this @pipe / @output combination is valid.
+ * @output: The output for which this @pipe / @output combination is valid.
+ *
+ * This loop is called over all pipes, and will try to find a compatible output
+ * for each pipe. Unlike for_each_pipe_with_valid_output(), this function will
+ * be called at most once for each pipe.
+ */
+#define for_each_pipe_with_single_output(display, pipe, output) \
+	for (igt_output_t *__outputs[(display)->n_pipes], \
+	     **__output = __igt_pipe_populate_outputs((display), __outputs); \
+	     __output < &__outputs[(display)->n_pipes]; __output++) \
+		for_each_if (*__output && \
+			     ((pipe) = (__outputs - __output), (output) = *__output, 1))
+
 /**
  * for_each_valid_output_on_pipe:
  * @display: a pointer to an #igt_display_t structure
Signature · 6 lines
2.16.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#1 lore raw

PATCH 2/4 tests/kms_rmfb: Use for_each_pipe_with_single_output.

A single output on every pipe will do for testing.

---
 tests/kms_rmfb.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
tests/kms_rmfb.c +2 -6
index c97adceea761..f3461cc919e9 100644
@@ -129,15 +129,10 @@ static void
 run_rmfb_test(struct rmfb_data *data, bool reopen)
 {
 	igt_output_t *output;
-	int valid_tests = 0;
 	enum pipe pipe;
 
-	for_each_pipe_with_valid_output(&data->display, pipe, output) {
+	for_each_pipe_with_single_output(&data->display, pipe, output)
 		test_rmfb(data, output, pipe, reopen);
-		valid_tests = 1;
-	}
-
-	igt_require_f(valid_tests, "no valid crtc/connector combinations found\n");
 }
 
 igt_main
@@ -152,6 +147,7 @@ igt_main
 		kmstest_set_vt_graphics_mode();
 
 		igt_display_init(&data.display, data.drm_fd);
+		igt_display_require_output(&data.display);
 	}
 
 	igt_subtest_f("rmfb-ioctl")
Signature · 6 lines
2.16.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#2 lore raw

PATCH 3/4 tests/kms_busy: Convert to using igt_get_single_output_for_pipe.

In reply to Maarten Lankhorst

Put a single igt_display_require_output_on_pipe in the fixture, so we know we always have an output on the pipe and can always assume it's not NULL.

---
 tests/kms_busy.c | 38 +++++++++++++++-----------------------
 1 file changed, 15 insertions(+), 23 deletions(-)
tests/kms_busy.c +15 -23
index 0828a8b38a06..5b4959681025 100644
@@ -35,31 +35,23 @@ IGT_TEST_DESCRIPTION("Basic check of KMS ABI with busy framebuffers.");
 static igt_output_t *
 set_fb_on_crtc(igt_display_t *dpy, int pipe, struct igt_fb *fb)
 {
+	drmModeModeInfoPtr mode;
+	igt_plane_t *primary;
 	igt_output_t *output;
 
-	for_each_valid_output_on_pipe(dpy, pipe, output) {
-		drmModeModeInfoPtr mode;
-		igt_plane_t *primary;
-
-		if (output->pending_pipe != PIPE_NONE)
-			continue;
-
-		igt_output_set_pipe(output, pipe);
-		mode = igt_output_get_mode(output);
+	output = igt_get_single_output_for_pipe(dpy, pipe);
 
-		igt_create_pattern_fb(dpy->drm_fd,
-				      mode->hdisplay, mode->vdisplay,
-				      DRM_FORMAT_XRGB8888,
-				      LOCAL_I915_FORMAT_MOD_X_TILED,
-				      fb);
+	igt_output_set_pipe(output, pipe);
+	mode = igt_output_get_mode(output);
 
-		primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
-		igt_plane_set_fb(primary, fb);
+	igt_create_pattern_fb(dpy->drm_fd, mode->hdisplay, mode->vdisplay,
+			      DRM_FORMAT_XRGB8888,
+			      LOCAL_I915_FORMAT_MOD_X_TILED, fb);
 
-		return output;
-	}
+	primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
+	igt_plane_set_fb(primary, fb);
 
-	return NULL;
+	return output;
 }
 
 static void do_cleanup_display(igt_display_t *dpy)
@@ -168,7 +160,7 @@ static void test_flip(igt_display_t *dpy, unsigned ring, int pipe, bool modeset)
 
 	signal(SIGALRM, sighandler);
 
-	igt_require((output = set_fb_on_crtc(dpy, pipe, &fb[0])));
+	output = set_fb_on_crtc(dpy, pipe, &fb[0]);
 	igt_display_commit2(dpy, COMMIT_LEGACY);
 
 	igt_create_pattern_fb(dpy->drm_fd,
@@ -246,7 +238,7 @@ static void test_hang(igt_display_t *dpy, unsigned ring,
 	igt_output_t *output;
 	igt_plane_t *primary;
 
-	igt_require((output = set_fb_on_crtc(dpy, pipe, &fb[0])));
+	output = set_fb_on_crtc(dpy, pipe, &fb[0]);
 	igt_display_commit2(dpy, COMMIT_ATOMIC);
 	primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
 
@@ -290,7 +282,7 @@ static void test_pageflip_modeset_hang(igt_display_t *dpy,
 	igt_plane_t *primary;
 	igt_spin_t *t;
 
-	igt_require((output = set_fb_on_crtc(dpy, pipe, &fb)));
+	output = set_fb_on_crtc(dpy, pipe, &fb);
 	primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
 
 	igt_display_commit2(dpy, dpy->is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
@@ -337,7 +329,7 @@ igt_main
 		errno = 0;
 
 		igt_fixture {
-			igt_skip_on(n >= display.n_pipes);
+			igt_display_require_output_on_pipe(&display, n);
 		}
 
 		igt_subtest_f("basic-flip-%s",
Signature · 6 lines
2.16.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#3 lore raw

PATCH 4/4 tests/kms_chv_cursor_fail: Reorder tests, and use igt_display_require_output_on_pipe.

In reply to Maarten Lankhorst

This test is purely about the pipe fifo underrun, so not all outputs need to be tested. Reorder the tests to run per pipe first, this will save a modeset for all different sizes when the tests are run per-binary, and another modeset on each subtest when more than 1 output is connected.

---
 tests/kms_chv_cursor_fail.c | 85 ++++++++++++++++++---------------------------
 1 file changed, 34 insertions(+), 51 deletions(-)
tests/kms_chv_cursor_fail.c +34 -51
index ffbe39d0c41b..0dd366c3b4b1 100644
@@ -246,7 +246,7 @@ static void prepare_crtc(data_t *data)
 	primary = igt_output_get_plane_type(data->output, DRM_PLANE_TYPE_PRIMARY);
 	igt_plane_set_fb(primary, &data->primary_fb);
 
-	igt_display_commit(display);
+	igt_display_commit2(display, display->is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
 
 	data->jump_x = (mode->hdisplay - data->curw) / 2;
 	data->jump_y = (mode->vdisplay - data->curh) / 2;
@@ -262,34 +262,15 @@ static void prepare_crtc(data_t *data)
 
 static void test_crtc(data_t *data, unsigned int edges)
 {
-	igt_display_t *display = &data->display;
-	int valid_tests = 0;
-
 	cleanup_crtc(data);
 
 	create_cursor_fb(data, data->curw, data->curh);
 
-	for_each_valid_output_on_pipe(display, data->pipe, data->output) {
-		prepare_crtc(data);
-
-		valid_tests++;
-
-		igt_info("Beginning %s on pipe %s, connector %s\n",
-			 igt_subtest_name(),
-			 kmstest_pipe_name(data->pipe),
-			 igt_output_name(data->output));
+	prepare_crtc(data);
 
-		test_edges(data, edges);
-
-		igt_info("\n%s on pipe %s, connector %s: PASSED\n\n",
-			 igt_subtest_name(),
-			 kmstest_pipe_name(data->pipe),
-			 igt_output_name(data->output));
-	}
+	test_edges(data, edges);
 
 	igt_remove_fb(data->drm_fd, &data->fb);
-
-	igt_require_f(valid_tests, "no valid crtc/connector combinations found\n");
 }
 
 static int opt_handler(int opt, int opt_index, void *_data)
@@ -354,36 +335,38 @@ int main(int argc, char **argv)
 		igt_display_init(&data.display, data.drm_fd);
 	}
 
-	for (data.curw = 64; data.curw <= 256; data.curw *= 2) {
-		data.curh = data.curw;
-		for (data.pipe = PIPE_A; data.pipe <= PIPE_C; data.pipe++) {
-			igt_subtest_f("pipe-%s-%dx%d-left-edge",
-				      kmstest_pipe_name(data.pipe),
-				      data.curw, data.curh) {
-				igt_require(data.pipe < data.display.n_pipes);
-				igt_require(data.curw <= max_curw && data.curh <= max_curh);
-				test_crtc(&data, EDGE_LEFT);
-			}
-			igt_subtest_f("pipe-%s-%dx%d-right-edge",
-				      kmstest_pipe_name(data.pipe),
-				      data.curw, data.curh) {
-				igt_require(data.pipe < data.display.n_pipes);
-				igt_require(data.curw <= max_curw && data.curh <= max_curh);
-				test_crtc(&data, EDGE_RIGHT);
+	for_each_pipe_static(data.pipe) {
+		igt_subtest_group {
+			igt_fixture {
+				igt_display_require_output_on_pipe(&data.display, data.pipe);
+				data.output = igt_get_single_output_for_pipe(&data.display, data.pipe);
 			}
-			igt_subtest_f("pipe-%s-%dx%d-top-edge",
-				      kmstest_pipe_name(data.pipe),
-				      data.curw, data.curh) {
-				igt_require(data.pipe < data.display.n_pipes);
-				igt_require(data.curw <= max_curw && data.curh <= max_curh);
-				test_crtc(&data, EDGE_TOP);
-			}
-			igt_subtest_f("pipe-%s-%dx%d-bottom-edge",
-				      kmstest_pipe_name(data.pipe),
-				      data.curw, data.curh) {
-				igt_require(data.pipe < data.display.n_pipes);
-				igt_require(data.curw <= max_curw && data.curh <= max_curh);
-				test_crtc(&data, EDGE_BOTTOM);
+
+			for (data.curw = 64; data.curw <= 256; data.curw *= 2) {
+				data.curh = data.curw;
+
+				igt_fixture
+					igt_require(data.curw <= max_curw && data.curh <= max_curh);
+
+				igt_subtest_f("pipe-%s-%dx%d-left-edge",
+					kmstest_pipe_name(data.pipe),
+					data.curw, data.curh)
+					test_crtc(&data, EDGE_LEFT);
+
+				igt_subtest_f("pipe-%s-%dx%d-right-edge",
+					kmstest_pipe_name(data.pipe),
+					data.curw, data.curh)
+					test_crtc(&data, EDGE_RIGHT);
+
+				igt_subtest_f("pipe-%s-%dx%d-top-edge",
+					kmstest_pipe_name(data.pipe),
+					data.curw, data.curh)
+					test_crtc(&data, EDGE_TOP);
+
+				igt_subtest_f("pipe-%s-%dx%d-bottom-edge",
+					kmstest_pipe_name(data.pipe),
+					data.curw, data.curh)
+					test_crtc(&data, EDGE_BOTTOM);
 			}
 		}
 	}
Signature · 6 lines
2.16.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#4 lore raw

[igt-dev] ✗ Fi.CI.BAT: failure for series starting with [i-g-t,1/4] lib/igt_kms: Add functions to get only a single output for a pipe.

In reply to Maarten Lankhorst
== Series Details ==

== Series Details ==

Series: series starting with [i-g-t,1/4] lib/igt_kms: Add functions to get only a single output for a pipe.
URL : https://patchwork.freedesktop.org/series/38687/
State : failure

== Summary ==

IGT patchset tested on top of latest successful build 960e55a87d7b7d7385063e37cc9f281df2be8037 igt/gem_ctx_isolation: Check isolation of registers between contexts

with latest DRM-Tip kernel build CI_DRM_3816
42d073db2a85 drm-tip: 2018y-02m-21d-14h-03m-58s UTC integration manifest

Testlist changes:
+igt@kms_chv_cursor_fail@pipe-d-64x64-bottom-edge +igt@kms_chv_cursor_fail@pipe-d-64x64-left-edge +igt@kms_chv_cursor_fail@pipe-d-64x64-right-edge +igt@kms_chv_cursor_fail@pipe-d-64x64-top-edge +igt@kms_chv_cursor_fail@pipe-d-128x128-bottom-edge +igt@kms_chv_cursor_fail@pipe-d-128x128-left-edge +igt@kms_chv_cursor_fail@pipe-d-128x128-right-edge +igt@kms_chv_cursor_fail@pipe-d-128x128-top-edge +igt@kms_chv_cursor_fail@pipe-d-256x256-bottom-edge +igt@kms_chv_cursor_fail@pipe-d-256x256-left-edge +igt@kms_chv_cursor_fail@pipe-d-256x256-right-edge +igt@kms_chv_cursor_fail@pipe-d-256x256-top-edge +igt@kms_chv_cursor_fail@pipe-e-64x64-bottom-edge +igt@kms_chv_cursor_fail@pipe-e-64x64-left-edge +igt@kms_chv_cursor_fail@pipe-e-64x64-right-edge +igt@kms_chv_cursor_fail@pipe-e-64x64-top-edge +igt@kms_chv_cursor_fail@pipe-e-128x128-bottom-edge +igt@kms_chv_cursor_fail@pipe-e-128x128-left-edge +igt@kms_chv_cursor_fail@pipe-e-128x128-right-edge +igt@kms_chv_cursor_fail@pipe-e-128x128-top-edge +igt@kms_chv_cursor_fail@pipe-e-256x256-bottom-edge +igt@kms_chv_cursor_fail@pipe-e-256x256-left-edge +igt@kms_chv_cursor_fail@pipe-e-256x256-right-edge +igt@kms_chv_cursor_fail@pipe-e-256x256-top-edge +igt@kms_chv_cursor_fail@pipe-f-64x64-bottom-edge +igt@kms_chv_cursor_fail@pipe-f-64x64-left-edge +igt@kms_chv_cursor_fail@pipe-f-64x64-right-edge +igt@kms_chv_cursor_fail@pipe-f-64x64-top-edge +igt@kms_chv_cursor_fail@pipe-f-128x128-bottom-edge +igt@kms_chv_cursor_fail@pipe-f-128x128-left-edge +igt@kms_chv_cursor_fail@pipe-f-128x128-right-edge +igt@kms_chv_cursor_fail@pipe-f-128x128-top-edge +igt@kms_chv_cursor_fail@pipe-f-256x256-bottom-edge +igt@kms_chv_cursor_fail@pipe-f-256x256-left-edge +igt@kms_chv_cursor_fail@pipe-f-256x256-right-edge +igt@kms_chv_cursor_fail@pipe-f-256x256-top-edge

Test gem_exec_suspend:

        Subgroup basic-s4-devices:
                pass       -> INCOMPLETE (fi-skl-guc)
Test gem_mmap_gtt:
        Subgroup basic-small-bo-tiledx:
                pass       -> FAIL       (fi-gdg-551) fdo#102575
Test kms_busy:
        Subgroup basic-flip-c:
                pass       -> SKIP       (fi-bsw-n3050)
Test kms_pipe_crc_basic:
        Subgroup suspend-read-crc-pipe-a:
                fail       -> PASS       (fi-ivb-3520m)
        Subgroup suspend-read-crc-pipe-b:
                incomplete -> PASS       (fi-snb-2520m) fdo#103713
                fail       -> PASS       (fi-ivb-3520m)
        Subgroup suspend-read-crc-pipe-c:
                fail       -> PASS       (fi-ivb-3520m)

fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713

fi-bdw-5557u     total:288  pass:267  dwarn:0   dfail:0   fail:0   skip:21  time:419s
fi-bdw-gvtdvm    total:288  pass:264  dwarn:0   dfail:0   fail:0   skip:24  time:423s
fi-blb-e6850     total:288  pass:223  dwarn:1   dfail:0   fail:0   skip:64  time:374s
fi-bsw-n3050     total:288  pass:241  dwarn:0   dfail:0   fail:0   skip:47  time:485s
fi-bwr-2160      total:288  pass:183  dwarn:0   dfail:0   fail:0   skip:105 time:286s
fi-bxt-dsi       total:288  pass:258  dwarn:0   dfail:0   fail:0   skip:30  time:479s
fi-bxt-j4205     total:288  pass:259  dwarn:0   dfail:0   fail:0   skip:29  time:486s
fi-byt-j1900     total:288  pass:253  dwarn:0   dfail:0   fail:0   skip:35  time:469s
fi-byt-n2820     total:288  pass:249  dwarn:0   dfail:0   fail:0   skip:39  time:466s
fi-cfl-s2        total:288  pass:262  dwarn:0   dfail:0   fail:0   skip:26  time:562s
fi-elk-e7500     total:288  pass:229  dwarn:0   dfail:0   fail:0   skip:59  time:418s
fi-gdg-551       total:288  pass:179  dwarn:0   dfail:0   fail:1   skip:108 time:286s
fi-glk-1         total:288  pass:260  dwarn:0   dfail:0   fail:0   skip:28  time:513s
fi-hsw-4770      total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:387s
fi-ilk-650       total:288  pass:228  dwarn:0   dfail:0   fail:0   skip:60  time:411s
fi-ivb-3520m     total:288  pass:259  dwarn:0   dfail:0   fail:0   skip:29  time:449s
fi-ivb-3770      total:288  pass:255  dwarn:0   dfail:0   fail:0   skip:33  time:413s
fi-kbl-7500u     total:288  pass:263  dwarn:1   dfail:0   fail:0   skip:24  time:455s
fi-kbl-7560u     total:288  pass:269  dwarn:0   dfail:0   fail:0   skip:19  time:483s
fi-kbl-7567u     total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:451s
fi-kbl-r         total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:493s
fi-pnv-d510      total:288  pass:222  dwarn:1   dfail:0   fail:0   skip:65  time:590s
fi-skl-6260u     total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:431s
fi-skl-6600u     total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:504s
fi-skl-6700hq    total:288  pass:262  dwarn:0   dfail:0   fail:0   skip:26  time:525s
fi-skl-6700k2    total:288  pass:264  dwarn:0   dfail:0   fail:0   skip:24  time:487s
fi-skl-6770hq    total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:472s
fi-skl-guc       total:109  pass:97   dwarn:0   dfail:0   fail:0   skip:11 
fi-skl-gvtdvm    total:288  pass:265  dwarn:0   dfail:0   fail:0   skip:23  time:429s
fi-snb-2520m     total:288  pass:248  dwarn:0   dfail:0   fail:0   skip:40  time:531s
fi-snb-2600      total:288  pass:248  dwarn:0   dfail:0   fail:0   skip:40  time:392s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_970/issues.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#5 lore raw

[igt-dev] ✗ Fi.CI.BAT: warning for series starting with [i-g-t,1/4] lib/igt_kms: Add functions to get only a single output for a pipe.

In reply to Maarten Lankhorst
== Series Details ==

== Series Details ==

Series: series starting with [i-g-t,1/4] lib/igt_kms: Add functions to get only a single output for a pipe.
URL : https://patchwork.freedesktop.org/series/38687/
State : warning

== Summary ==

IGT patchset tested on top of latest successful build ec872b7dc1fe68d153aaceaf74d55865719a76da tests/perf_pmu: Handle CPU hotplug failures better

with latest DRM-Tip kernel build CI_DRM_3868
c07ef2c77d14 drm-tip: 2018y-03m-03d-08h-39m-05s UTC integration manifest

Testlist changes:
+igt@kms_chv_cursor_fail@pipe-d-64x64-bottom-edge +igt@kms_chv_cursor_fail@pipe-d-64x64-left-edge +igt@kms_chv_cursor_fail@pipe-d-64x64-right-edge +igt@kms_chv_cursor_fail@pipe-d-64x64-top-edge +igt@kms_chv_cursor_fail@pipe-d-128x128-bottom-edge +igt@kms_chv_cursor_fail@pipe-d-128x128-left-edge +igt@kms_chv_cursor_fail@pipe-d-128x128-right-edge +igt@kms_chv_cursor_fail@pipe-d-128x128-top-edge +igt@kms_chv_cursor_fail@pipe-d-256x256-bottom-edge +igt@kms_chv_cursor_fail@pipe-d-256x256-left-edge +igt@kms_chv_cursor_fail@pipe-d-256x256-right-edge +igt@kms_chv_cursor_fail@pipe-d-256x256-top-edge +igt@kms_chv_cursor_fail@pipe-e-64x64-bottom-edge +igt@kms_chv_cursor_fail@pipe-e-64x64-left-edge +igt@kms_chv_cursor_fail@pipe-e-64x64-right-edge +igt@kms_chv_cursor_fail@pipe-e-64x64-top-edge +igt@kms_chv_cursor_fail@pipe-e-128x128-bottom-edge +igt@kms_chv_cursor_fail@pipe-e-128x128-left-edge +igt@kms_chv_cursor_fail@pipe-e-128x128-right-edge +igt@kms_chv_cursor_fail@pipe-e-128x128-top-edge +igt@kms_chv_cursor_fail@pipe-e-256x256-bottom-edge +igt@kms_chv_cursor_fail@pipe-e-256x256-left-edge +igt@kms_chv_cursor_fail@pipe-e-256x256-right-edge +igt@kms_chv_cursor_fail@pipe-e-256x256-top-edge +igt@kms_chv_cursor_fail@pipe-f-64x64-bottom-edge +igt@kms_chv_cursor_fail@pipe-f-64x64-left-edge +igt@kms_chv_cursor_fail@pipe-f-64x64-right-edge +igt@kms_chv_cursor_fail@pipe-f-64x64-top-edge +igt@kms_chv_cursor_fail@pipe-f-128x128-bottom-edge +igt@kms_chv_cursor_fail@pipe-f-128x128-left-edge +igt@kms_chv_cursor_fail@pipe-f-128x128-right-edge +igt@kms_chv_cursor_fail@pipe-f-128x128-top-edge +igt@kms_chv_cursor_fail@pipe-f-256x256-bottom-edge +igt@kms_chv_cursor_fail@pipe-f-256x256-left-edge +igt@kms_chv_cursor_fail@pipe-f-256x256-right-edge +igt@kms_chv_cursor_fail@pipe-f-256x256-top-edge

---- Possible new issues:

Test kms_busy:

        Subgroup basic-flip-c:
                pass       -> SKIP       (fi-bsw-n3050)

---- Known issues:

Test debugfs_test:

        Subgroup read_all_entries:
                incomplete -> PASS       (fi-snb-2520m) fdo#103713
Test gem_mmap_gtt:
        Subgroup basic-small-bo-tiledx:
                pass       -> FAIL       (fi-gdg-551) fdo#102575
Test kms_chamelium:
        Subgroup dp-edid-read:
                fail       -> PASS       (fi-kbl-7500u) fdo#102505

fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
fdo#102505 https://bugs.freedesktop.org/show_bug.cgi?id=102505

fi-bdw-5557u     total:288  pass:267  dwarn:0   dfail:0   fail:0   skip:21  time:415s
fi-bdw-gvtdvm    total:288  pass:264  dwarn:0   dfail:0   fail:0   skip:24  time:432s
fi-blb-e6850     total:288  pass:223  dwarn:1   dfail:0   fail:0   skip:64  time:373s
fi-bsw-n3050     total:288  pass:241  dwarn:0   dfail:0   fail:0   skip:47  time:493s
fi-bwr-2160      total:288  pass:183  dwarn:0   dfail:0   fail:0   skip:105 time:279s
fi-bxt-dsi       total:288  pass:258  dwarn:0   dfail:0   fail:0   skip:30  time:481s
fi-bxt-j4205     total:288  pass:259  dwarn:0   dfail:0   fail:0   skip:29  time:489s
fi-byt-j1900     total:288  pass:253  dwarn:0   dfail:0   fail:0   skip:35  time:470s
fi-byt-n2820     total:288  pass:249  dwarn:0   dfail:0   fail:0   skip:39  time:457s
fi-cfl-8700k     total:288  pass:260  dwarn:0   dfail:0   fail:0   skip:28  time:400s
fi-cfl-s2        total:288  pass:262  dwarn:0   dfail:0   fail:0   skip:26  time:565s
fi-elk-e7500     total:288  pass:229  dwarn:0   dfail:0   fail:0   skip:59  time:412s
fi-gdg-551       total:288  pass:179  dwarn:0   dfail:0   fail:1   skip:108 time:289s
fi-glk-1         total:288  pass:260  dwarn:0   dfail:0   fail:0   skip:28  time:507s
fi-hsw-4770      total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:387s
fi-ilk-650       total:288  pass:228  dwarn:0   dfail:0   fail:0   skip:60  time:407s
fi-ivb-3520m     total:288  pass:259  dwarn:0   dfail:0   fail:0   skip:29  time:446s
fi-ivb-3770      total:288  pass:255  dwarn:0   dfail:0   fail:0   skip:33  time:412s
fi-kbl-7500u     total:288  pass:263  dwarn:1   dfail:0   fail:0   skip:24  time:450s
fi-kbl-7560u     total:288  pass:269  dwarn:0   dfail:0   fail:0   skip:19  time:493s
fi-kbl-7567u     total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:448s
fi-kbl-r         total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:501s
fi-pnv-d510      total:288  pass:222  dwarn:1   dfail:0   fail:0   skip:65  time:585s
fi-skl-6260u     total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:422s
fi-skl-6600u     total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:504s
fi-skl-6700hq    total:288  pass:262  dwarn:0   dfail:0   fail:0   skip:26  time:518s
fi-skl-6700k2    total:288  pass:264  dwarn:0   dfail:0   fail:0   skip:24  time:491s
fi-skl-6770hq    total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:478s
fi-skl-guc       total:288  pass:260  dwarn:0   dfail:0   fail:0   skip:28  time:407s
fi-skl-gvtdvm    total:288  pass:265  dwarn:0   dfail:0   fail:0   skip:23  time:430s
fi-snb-2520m     total:288  pass:248  dwarn:0   dfail:0   fail:0   skip:40  time:518s
fi-snb-2600      total:288  pass:248  dwarn:0   dfail:0   fail:0   skip:40  time:392s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_1053/issues.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev