Kconfig: cmd: Make networking command dependent on NET
Subsystems (7)
PATCH v2 1/1 Kconfig: cmd: Make networking command dependent on NET
Enable networking command only when NET is enabled. And remove selecting NET for CMD_NET
---
Changes in v2:
- Check several boards by hand.
There is a huge impact on defconfigs because of select NET. But this change makes sense to do but it just needs to be syncup properly. Do we have a tool for this kind of change?
--- cmd/Kconfig | 5 ++++- configs/aspenite_defconfig | 2 -- configs/at91sam9rlek_dataflash_defconfig | 2 -- configs/at91sam9rlek_mmc_defconfig | 2 -- configs/at91sam9rlek_nandflash_defconfig | 2 -- configs/bcm23550_w1d_defconfig | 2 -- configs/bcm28155_ap_defconfig | 2 -- configs/cairo_defconfig | 5 ++--- configs/mx23evk_defconfig | 2 -- configs/omap3_pandora_defconfig | 2 -- configs/origen_defconfig | 4 ++-- configs/s5p_goni_defconfig | 2 -- configs/s5pc210_universal_defconfig | 5 ++--- configs/thunderx_88xx_defconfig | 4 +--- configs/topic_miami_defconfig | 2 -- configs/topic_miamilite_defconfig | 2 -- configs/trats2_defconfig | 5 ++--- configs/trats_defconfig | 5 ++--- configs/tricorder_defconfig | 2 -- configs/tricorder_flash_defconfig | 2 -- configs/warp_defconfig | 2 -- configs/zynq_zc770_xm011_defconfig | 2 -- configs/zynq_zc770_xm011_x16_defconfig | 2 -- 23 files changed, 15 insertions(+), 50 deletions(-)
cmd/Kconfig +4 -1
@@ -1012,9 +1012,10 @@ endmenu menu "Network commands" +if NET + config CMD_NET bool "bootp, tftpboot" - select NET default y help Network commands.
@@ -1091,6 +1092,8 @@ config CMD_ETHSW operations such as enabling / disabling a port and viewing/maintaining the filtering database (FDB) +endif + endmenu menu "Misc commands"
configs/aspenite_defconfig +0 -2
@@ -7,8 +7,6 @@ CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set # CONFIG_MMC is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/at91sam9rlek_dataflash_defconfig +0 -2
@@ -23,8 +23,6 @@ CONFIG_CMD_NAND=y CONFIG_CMD_SF=y # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y
configs/at91sam9rlek_mmc_defconfig +0 -2
@@ -23,8 +23,6 @@ CONFIG_CMD_NAND=y CONFIG_CMD_SF=y # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_FAT=y
configs/at91sam9rlek_nandflash_defconfig +0 -2
@@ -23,8 +23,6 @@ CONFIG_CMD_NAND=y CONFIG_CMD_SF=y # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_NAND=y
configs/bcm23550_w1d_defconfig +0 -2
@@ -19,8 +19,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y CONFIG_CMD_FAT=y CONFIG_EFI_PARTITION=y
configs/bcm28155_ap_defconfig +0 -2
@@ -20,8 +20,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y CONFIG_CMD_FAT=y CONFIG_EFI_PARTITION=y
configs/cairo_defconfig +2 -3
@@ -23,16 +23,15 @@ CONFIG_CMD_NAND=y CONFIG_CMD_NAND_LOCK_UNLOCK=y CONFIG_CMD_SPI=y # CONFIG_CMD_NET is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_MTDPARTS=y CONFIG_ENV_IS_IN_NAND=y +CONFIG_NET=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SYS_NS16550=y CONFIG_OMAP3_SPI=y CONFIG_FAT_WRITE=y +# CONFIG_REGEX is not set CONFIG_OF_LIBFDT=y
configs/mx23evk_defconfig +0 -2
@@ -20,8 +20,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_BMP=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y
configs/omap3_pandora_defconfig +0 -2
@@ -17,8 +17,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
configs/origen_defconfig +2 -2
@@ -19,13 +19,12 @@ CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_NET is not set -CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set -CONFIG_CMD_MII=y CONFIG_CMD_CACHE=y # CONFIG_CMD_MISC is not set CONFIG_CMD_EXT4_WRITE=y CONFIG_OF_CONTROL=y +CONFIG_NET=y CONFIG_DFU_MMC=y CONFIG_DM_MMC=y CONFIG_MMC_DW=y
@@ -41,3 +40,4 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x6601 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_USB_FUNCTION_THOR=y +# CONFIG_REGEX is not set
configs/s5p_goni_defconfig +0 -2
@@ -20,8 +20,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_ONENAND=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y # CONFIG_CMD_MISC is not set CONFIG_CMD_EXT4=y
configs/s5pc210_universal_defconfig +2 -3
@@ -19,15 +19,13 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_NET is not set -CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y # CONFIG_CMD_MISC is not set CONFIG_CMD_EXT4_WRITE=y CONFIG_MTDPARTS_DEFAULT="mtdparts=samsung-onenand:128k(s-boot),896k(bootloader),256k(params),2816k(config),8m(csa),7m(kernel),1m(log),12m(modem),60m(qboot),-(UBI)" CONFIG_OF_CONTROL=y +CONFIG_NET=y CONFIG_DFU_MMC=y CONFIG_SYS_I2C_S3C24X0=y CONFIG_DM_MMC=y
@@ -46,3 +44,4 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x6601 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_USB_FUNCTION_THOR=y +# CONFIG_REGEX is not set
configs/thunderx_88xx_defconfig +1 -3
@@ -18,8 +18,7 @@ CONFIG_SYS_PROMPT="ThunderX_88XX> " # CONFIG_CMD_SAVEENV is not set # CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_FLASH is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set +CONFIG_NET=y CONFIG_DM=y # CONFIG_MMC is not set CONFIG_DM_SERIAL=y
@@ -27,4 +26,3 @@ CONFIG_DEBUG_UART_PL011=y CONFIG_DEBUG_UART_BASE=0x87e024000000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART_SKIP_INIT=y -CONFIG_REGEX=y
configs/topic_miami_defconfig +0 -2
@@ -23,8 +23,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y CONFIG_OF_EMBED=y CONFIG_SPL_DM_SEQ_ALIAS=y
configs/topic_miamilite_defconfig +0 -2
@@ -23,8 +23,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y CONFIG_OF_EMBED=y CONFIG_SPL_DM_SEQ_ALIAS=y
configs/trats2_defconfig +2 -3
@@ -22,14 +22,12 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_NET is not set -CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y # CONFIG_CMD_MISC is not set CONFIG_CMD_EXT4_WRITE=y CONFIG_OF_CONTROL=y +CONFIG_NET=y CONFIG_DFU_MMC=y CONFIG_DM_I2C_GPIO=y CONFIG_SYS_I2C_S3C24X0=y
@@ -49,4 +47,5 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x6601 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_USB_FUNCTION_THOR=y +# CONFIG_REGEX is not set CONFIG_LIB_HW_RAND=y
configs/trats_defconfig +2 -3
@@ -21,14 +21,12 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_NET is not set -CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y # CONFIG_CMD_MISC is not set CONFIG_CMD_EXT4_WRITE=y CONFIG_OF_CONTROL=y +CONFIG_NET=y CONFIG_DFU_MMC=y CONFIG_DM_I2C_GPIO=y CONFIG_SYS_I2C_S3C24X0=y
@@ -48,4 +46,5 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x6601 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_USB_FUNCTION_THOR=y +# CONFIG_REGEX is not set CONFIG_LIB_HW_RAND=y
configs/tricorder_defconfig +0 -2
@@ -15,8 +15,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_LOCK_UNLOCK=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
configs/tricorder_flash_defconfig +0 -2
@@ -15,8 +15,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_LOCK_UNLOCK=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
configs/warp_defconfig +0 -2
@@ -18,8 +18,6 @@ CONFIG_CMD_PART=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y
configs/zynq_zc770_xm011_defconfig +0 -2
@@ -24,8 +24,6 @@ CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y CONFIG_CMD_NAND_LOCK_UNLOCK=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set
configs/zynq_zc770_xm011_x16_defconfig +0 -2
@@ -24,8 +24,6 @@ CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y CONFIG_CMD_NAND_LOCK_UNLOCK=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set
Signature · 1 line
1.9.1
PATCH v2 1/1 Kconfig: cmd: Make networking command dependent on NET
Quoted 4 lines · Michal Simek
Enable networking command only when NET is enabled. And remove selecting NET for
CMD_NETSigned-off-by Michal Simek <[email protected]>
Quoted 8 lines
---
Changes in v2:
- Check several boards by hand.There is a huge impact on defconfigs because of select NET. But this change makes sense to do but it just needs to be syncup properly. Do we have a tool for this kind of change?
So, I've applied this patch, with a good bit of modification. What I wasn't clear about before, sorry, was that we need to make NET default y in here too. However, we also have some decent areas of the code that use "CONFIG_CMD_NET" when it really means "CONFIG_NET", at least conceptually. But in order to make everything work as-is today, and leave these fixes to a later point in time (as they are fixes and should happen) we change some areas today that reference CONFIG_NET to reference CONFIG_CMD_NET. Once net/ gets cleaned up, we can use CONFIG_NET without CONFIG_CMD_NET in more area. It's also not quite 100% size-neutral as the topic_miami* boards were playing some games that can't quite be done as they were before, but I believe the end result is they can now more easily and thoroughly disable the networking stuff that intended to be removed.
Kconfig +9 -9
@@ -69,22 +69,22 @@ config DISTRO_DEFAULTS imply USE_BOOTCOMMAND select CMD_BOOTZ if ARM && !ARM64 select CMD_BOOTI if ARM64 - select CMD_DHCP if NET - select CMD_PXE if NET + select CMD_DHCP if NET && CMD_NET + select CMD_PXE if NET && CMD_NET select CMD_EXT2 select CMD_EXT4 select CMD_FAT select CMD_FS_GENERIC - select CMD_MII if NET + imply CMD_MII if NET select CMD_PING if NET select CMD_PART if PARTITIONS select HUSH_PARSER - select BOOTP_BOOTPATH if NET - select BOOTP_DNS if NET - select BOOTP_GATEWAY if NET - select BOOTP_HOSTNAME if NET - select BOOTP_PXE if NET - select BOOTP_SUBNETMASK if NET + select BOOTP_BOOTPATH if NET && CMD_NET + select BOOTP_DNS if NET && CMD_NET + select BOOTP_GATEWAY if NET && CMD_NET + select BOOTP_HOSTNAME if NET && CMD_NET + select BOOTP_PXE if NET && CMD_NET + select BOOTP_SUBNETMASK if NET && CMD_NET select CMDLINE_EDITING select AUTO_COMPLETE select SYS_LONGHELP
cmd/Kconfig +2 -0
@@ -1039,11 +1039,13 @@ config CMD_RARP config CMD_DHCP bool "dhcp" + depends on CMD_NET help Boot image via network using DHCP/TFTP protocol config CMD_PXE bool "pxe" + depends on CMD_NET select MENU help Boot image via network using PXE protocol
cmd/bootefi.c +2 -2
@@ -42,7 +42,7 @@ static void efi_init_obj_list(void)#if defined(CONFIG_LCD ) || defined(CONFIG_DM_VIDEO )efi_gop_register ();#endif -#ifdef CONFIG_NET +#ifdef CONFIG_CMD_NET efi_net_register ();#endif #ifdef CONFIG_GENERATE_SMBIOS_TABLE
@@ -450,7 +450,7 @@ void efi_set_bootdev(const char *dev, const char *devnr, const char *path) bootefi_device_path =efi_dp_from_part (desc, part); }else { -#ifdef CONFIG_NET +#ifdef CONFIG_CMD_NET bootefi_device_path =efi_dp_from_eth ();#endif }
configs/M52277EVB_defconfig +1 -2
@@ -12,12 +12,11 @@ CONFIG_CMD_I2C=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y CONFIG_CMD_JFFS2=y CONFIG_ENV_IS_IN_FLASH=y +# CONFIG_NET is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y
configs/M52277EVB_stmicro_defconfig +1 -2
@@ -11,12 +11,11 @@ CONFIG_CMD_I2C=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y CONFIG_CMD_JFFS2=y CONFIG_ENV_IS_IN_SPI_FLASH=y +# CONFIG_NET is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y
configs/M5249EVB_defconfig +1 -1
@@ -8,6 +8,6 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_CMD_IMLS=y CONFIG_LOOPW=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set CONFIG_CMD_CACHE=y +# CONFIG_NET is not set CONFIG_MTD_NOR_FLASH=y
configs/M5253EVBE_defconfig +1 -1
@@ -8,9 +8,9 @@ CONFIG_BOOTDELAY=5 CONFIG_CMD_IMLS=y CONFIG_CMD_IDE=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MAC_PARTITION=y +# CONFIG_NET is not set CONFIG_MTD_NOR_FLASH=y
configs/am335x_pdu001_defconfig +1 -2
@@ -28,13 +28,12 @@ CONFIG_CMD_MEMINFO=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_EMBED=y +# CONFIG_NET is not set CONFIG_SPL_DM=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y
configs/am3517_crane_defconfig +1 -1
@@ -20,7 +20,6 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set CONFIG_CMD_DHCP=y -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_CMD_JFFS2=y
@@ -34,3 +33,4 @@ CONFIG_USB=y CONFIG_USB_MUSB_HCD=y CONFIG_USB_AM35X=y CONFIG_USB_STORAGE=y +# CONFIG_REGEX is not set
configs/amcore_defconfig +1 -2
@@ -13,12 +13,11 @@ CONFIG_CMD_IMLS=y # CONFIG_CMD_XIMG is not set CONFIG_LOOPW=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIMER=y CONFIG_CMD_DIAG=y CONFIG_ENV_IS_IN_FLASH=y +# CONFIG_NET is not set CONFIG_DM=y CONFIG_MTD_NOR_FLASH=y CONFIG_DM_SERIAL=y
configs/ap143_defconfig +1 -2
@@ -22,13 +22,12 @@ CONFIG_SYS_PROMPT="ap143 # " # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nor0=spi-flash.0" CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-flash.0:256k(u-boot),64k(u-boot-env),6336k(rootfs),1472k(uImage),64k(ART)" # CONFIG_ISO_PARTITION is not set CONFIG_ENV_IS_IN_SPI_FLASH=y +# CONFIG_NET is not set CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y
configs/aspenite_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set +# CONFIG_NET is not set # CONFIG_MMC is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/astro_mcf5373l_defconfig +1 -2
@@ -12,11 +12,10 @@ CONFIG_CMD_IMLS=y CONFIG_CMD_FPGA_LOADMK=y CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y CONFIG_CMD_JFFS2=y +# CONFIG_NET is not set CONFIG_FPGA_ALTERA=y CONFIG_FPGA_CYCLON2=y CONFIG_FPGA_XILINX=y
configs/at91sam9rlek_dataflash_defconfig +1 -0
@@ -26,6 +26,7 @@ CONFIG_CMD_SF=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y +# CONFIG_NET is not set CONFIG_DM=y CONFIG_CLK=y CONFIG_CLK_AT91=y
configs/at91sam9rlek_mmc_defconfig +1 -0
@@ -26,6 +26,7 @@ CONFIG_CMD_SF=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_FAT=y +# CONFIG_NET is not set CONFIG_DM=y CONFIG_CLK=y CONFIG_CLK_AT91=y
configs/at91sam9rlek_nandflash_defconfig +1 -0
@@ -26,6 +26,7 @@ CONFIG_CMD_SF=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_NAND=y +# CONFIG_NET is not set CONFIG_DM=y CONFIG_CLK=y CONFIG_CLK_AT91=y
configs/bcm11130_defconfig +1 -2
@@ -14,13 +14,12 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y CONFIG_CMD_FAT=y CONFIG_EFI_PARTITION=y # CONFIG_PARTITION_UUIDS is not set CONFIG_ENV_IS_IN_MMC=y +# CONFIG_NET is not set CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_KONA=y
configs/bcm11130_nand_defconfig +1 -2
@@ -13,13 +13,12 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y CONFIG_CMD_FAT=y CONFIG_EFI_PARTITION=y # CONFIG_PARTITION_UUIDS is not set CONFIG_ENV_IS_IN_MMC=y +# CONFIG_NET is not set CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_KONA=y
configs/bcm23550_w1d_defconfig +1 -0
@@ -24,6 +24,7 @@ CONFIG_CMD_FAT=y CONFIG_EFI_PARTITION=y # CONFIG_PARTITION_UUIDS is not set CONFIG_ENV_IS_IN_MMC=y +# CONFIG_NET is not set CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_KONA=y
configs/bcm28155_ap_defconfig +1 -0
@@ -25,6 +25,7 @@ CONFIG_CMD_FAT=y CONFIG_EFI_PARTITION=y # CONFIG_PARTITION_UUIDS is not set CONFIG_ENV_IS_IN_MMC=y +# CONFIG_NET is not set CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_KONA=y
configs/cairo_defconfig +0 -1
@@ -26,7 +26,6 @@ CONFIG_CMD_SPI=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_MTDPARTS=y CONFIG_ENV_IS_IN_NAND=y -CONFIG_NET=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y CONFIG_SPL_NAND_SIMPLE=y
configs/comtrend_ar5315u_ram_defconfig +1 -2
@@ -27,9 +27,8 @@ CONFIG_CMD_MEMINFO=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set +# CONFIG_NET is not set # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_DM_GPIO=y CONFIG_LED=y
configs/comtrend_ar5387un_ram_defconfig +1 -2
@@ -27,9 +27,8 @@ CONFIG_CMD_MEMINFO=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set +# CONFIG_NET is not set # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_DM_GPIO=y CONFIG_LED=y
configs/comtrend_ct5361_ram_defconfig +1 -2
@@ -24,9 +24,8 @@ CONFIG_CMD_LICENSE=y # CONFIG_CMD_CRC32 is not set CONFIG_CMD_MEMINFO=y # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set +# CONFIG_NET is not set # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_DM_GPIO=y CONFIG_BCM6345_GPIO=y
configs/comtrend_vr3032u_ram_defconfig +1 -2
@@ -25,9 +25,8 @@ CONFIG_CMD_LICENSE=y CONFIG_CMD_MEMINFO=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set +# CONFIG_NET is not set # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_DM_GPIO=y CONFIG_LED=y
configs/comtrend_wap5813n_ram_defconfig +1 -2
@@ -24,9 +24,8 @@ CONFIG_CMD_LICENSE=y # CONFIG_CMD_CRC32 is not set CONFIG_CMD_MEMINFO=y # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set +# CONFIG_NET is not set # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_DM_GPIO=y CONFIG_BCM6345_GPIO=y
configs/efi-x86_defconfig +1 -0
@@ -33,5 +33,6 @@ CONFIG_DEBUG_EFI_CONSOLE=y CONFIG_DEBUG_UART_BASE=0 CONFIG_DEBUG_UART_CLOCK=0 CONFIG_ICH_SPI=y +# CONFIG_REGEX is not set CONFIG_EFI=y # CONFIG_EFI_LOADER is not set
configs/huawei_hg556a_ram_defconfig +1 -2
@@ -24,9 +24,8 @@ CONFIG_CMD_LICENSE=y # CONFIG_CMD_CRC32 is not set CONFIG_CMD_MEMINFO=y # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set +# CONFIG_NET is not set # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_DM_GPIO=y CONFIG_BCM6345_GPIO=y
configs/mpr2_defconfig +1 -2
@@ -21,10 +21,9 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y # CONFIG_CMD_MISC is not set +# CONFIG_NET is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y
configs/ms7720se_defconfig +1 -2
@@ -24,12 +24,11 @@ CONFIG_CMD_SDRAM=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y # CONFIG_CMD_MISC is not set CONFIG_CMD_EXT2=y CONFIG_DOS_PARTITION=y +# CONFIG_NET is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y
configs/ms7750se_defconfig +1 -2
@@ -21,10 +21,9 @@ CONFIG_BOOTARGS="console=ttySC0,38400" # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set CONFIG_ENV_IS_IN_FLASH=y +# CONFIG_NET is not set CONFIG_MTD_NOR_FLASH=y CONFIG_BAUDRATE=38400 CONFIG_SCIF_CONSOLE=y
configs/mx23evk_defconfig +1 -0
@@ -25,6 +25,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_ENV_IS_IN_MMC=y +# CONFIG_NET is not set CONFIG_MMC_MXS=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y
configs/mx6memcal_defconfig +1 -2
@@ -30,9 +30,8 @@ CONFIG_CMD_MEMTEST=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y +# CONFIG_NET is not set # CONFIG_MMC is not set CONFIG_USB=y CONFIG_USB_GADGET=y
configs/netgear_cg3100d_ram_defconfig +1 -2
@@ -26,9 +26,8 @@ CONFIG_CMD_MEMINFO=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set +# CONFIG_NET is not set # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_DM_GPIO=y CONFIG_BCM6345_GPIO=y
configs/nokia_rx51_defconfig +1 -2
@@ -17,11 +17,10 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y +# CONFIG_NET is not set CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y CONFIG_OMAP3_SPI=y
configs/omap3_pandora_defconfig +3 -0
@@ -17,6 +17,8 @@ CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_MII is not set CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
@@ -30,3 +32,4 @@ CONFIG_SYS_NS16550=y CONFIG_OMAP3_SPI=y CONFIG_FAT_WRITE=y CONFIG_OF_LIBFDT=y +# CONFIG_REGEX is not set
configs/omap4_sdp4430_defconfig +0 -2
@@ -20,13 +20,11 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y # CONFIG_EFI_PARTITION is not set CONFIG_SPL_PARTITION_UUIDS=y CONFIG_ENV_IS_IN_MMC=y -CONFIG_NET=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y CONFIG_OMAP3_SPI=y
configs/origen_defconfig +0 -1
@@ -24,7 +24,6 @@ CONFIG_CMD_CACHE=y # CONFIG_CMD_MISC is not set CONFIG_CMD_EXT4_WRITE=y CONFIG_OF_CONTROL=y -CONFIG_NET=y CONFIG_DFU_MMC=y CONFIG_DM_MMC=y CONFIG_MMC_DW=y
configs/s5p_goni_defconfig +1 -0
@@ -26,6 +26,7 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_ENV_IS_IN_MMC=y +# CONFIG_NET is not set CONFIG_DFU_MMC=y CONFIG_DM_I2C_GPIO=y CONFIG_MMC_SDHCI=y
configs/s5pc210_universal_defconfig +0 -1
@@ -25,7 +25,6 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_MTDPARTS_DEFAULT="mtdparts=samsung-onenand:128k(s-boot),896k(bootloader),256k(params),2816k(config),8m(csa),7m(kernel),1m(log),12m(modem),60m(qboot),-(UBI)" CONFIG_OF_CONTROL=y -CONFIG_NET=y CONFIG_DFU_MMC=y CONFIG_SYS_I2C_S3C24X0=y CONFIG_DM_MMC=y
configs/sagem_f at st1704_ram_defconfig +1 -2
@@ -27,9 +27,8 @@ CONFIG_CMD_MEMINFO=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set +# CONFIG_NET is not set # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_DM_GPIO=y CONFIG_BCM6345_GPIO=y
configs/sfr_nb4-ser_ram_defconfig +1 -2
@@ -25,9 +25,8 @@ CONFIG_CMD_LICENSE=y # CONFIG_CMD_CRC32 is not set CONFIG_CMD_MEMINFO=y # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set +# CONFIG_NET is not set # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_DM_GPIO=y CONFIG_BCM6345_GPIO=y
configs/stm32h743-disco_defconfig +1 -2
@@ -19,8 +19,6 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_TIMER=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y
@@ -29,6 +27,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y +# CONFIG_NET is not set CONFIG_DM_MMC=y CONFIG_STM32_SDMMC2=y # CONFIG_PINCTRL_FULL is not set
configs/stm32h743-eval_defconfig +1 -2
@@ -19,8 +19,6 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_TIMER=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y
@@ -29,6 +27,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y +# CONFIG_NET is not set CONFIG_DM_MMC=y CONFIG_STM32_SDMMC2=y # CONFIG_PINCTRL_FULL is not set
configs/stmark2_defconfig +1 -2
@@ -15,13 +15,12 @@ CONFIG_SYS_PROMPT="stmark2 $ " CONFIG_CMD_SF=y CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nor0=spi-flash.0" CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-flash.0:1m(u-boot),7m(kernel),-(rootfs)" CONFIG_ENV_IS_IN_SPI_FLASH=y +# CONFIG_NET is not set CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MTD=y CONFIG_CF_SPI=y
configs/thunderx_88xx_defconfig +3 -1
@@ -18,7 +18,8 @@ CONFIG_SYS_PROMPT="ThunderX_88XX> " # CONFIG_CMD_SAVEENV is not set # CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_FLASH is not set -CONFIG_NET=y +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set CONFIG_DM=y # CONFIG_MMC is not set CONFIG_DM_SERIAL=y
@@ -26,3 +27,4 @@ CONFIG_DEBUG_UART_PL011=y CONFIG_DEBUG_UART_BASE=0x87e024000000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_REGEX=y
configs/topic_miami_defconfig +3 -0
@@ -23,6 +23,8 @@ CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_MII is not set CONFIG_CMD_CACHE=y CONFIG_OF_EMBED=y CONFIG_SPL_DM_SEQ_ALIAS=y
@@ -52,3 +54,4 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_USB_FUNCTION_THOR=y +# CONFIG_REGEX is not set
configs/topic_miamilite_defconfig +3 -0
@@ -23,6 +23,8 @@ CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_MII is not set CONFIG_CMD_CACHE=y CONFIG_OF_EMBED=y CONFIG_SPL_DM_SEQ_ALIAS=y
@@ -53,3 +55,4 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_USB_FUNCTION_THOR=y +# CONFIG_REGEX is not set
configs/trats2_defconfig +0 -1
@@ -27,7 +27,6 @@ CONFIG_CMD_CACHE=y # CONFIG_CMD_MISC is not set CONFIG_CMD_EXT4_WRITE=y CONFIG_OF_CONTROL=y -CONFIG_NET=y CONFIG_DFU_MMC=y CONFIG_DM_I2C_GPIO=y CONFIG_SYS_I2C_S3C24X0=y
configs/trats_defconfig +0 -1
@@ -26,7 +26,6 @@ CONFIG_CMD_CACHE=y # CONFIG_CMD_MISC is not set CONFIG_CMD_EXT4_WRITE=y CONFIG_OF_CONTROL=y -CONFIG_NET=y CONFIG_DFU_MMC=y CONFIG_DM_I2C_GPIO=y CONFIG_SYS_I2C_S3C24X0=y
configs/tricorder_defconfig +1 -0
@@ -21,6 +21,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0" CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:128k(SPL),1m(u-boot),384k(u-boot-env1),1152k(mtdoops),384k(u-boot-env2),5m(kernel),2m(fdt),-(ubi)" CONFIG_CMD_UBI=y CONFIG_ENV_IS_IN_NAND=y +# CONFIG_NET is not set CONFIG_LED_STATUS=y CONFIG_LED_STATUS0=y CONFIG_LED_STATUS_BIT=1
configs/tricorder_flash_defconfig +1 -0
@@ -20,6 +20,7 @@ CONFIG_CMD_FAT=y CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0" CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:128k(SPL),1m(u-boot),384k(u-boot-env1),1152k(mtdoops),384k(u-boot-env2),5m(kernel),2m(fdt),-(ubi)" CONFIG_CMD_UBI=y +# CONFIG_NET is not set CONFIG_LED_STATUS=y CONFIG_LED_STATUS0=y CONFIG_LED_STATUS_BIT=1
configs/vct_platinum_onenand_small_defconfig +1 -2
@@ -19,8 +19,6 @@ CONFIG_CMD_ONENAND=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set CONFIG_CMD_JFFS2=y CONFIG_MTDIDS_DEFAULT="onenand0=onenand"
@@ -29,4 +27,5 @@ CONFIG_CMD_UBI=y # CONFIG_CMD_UBIFS is not set # CONFIG_ISO_PARTITION is not set CONFIG_ENV_IS_IN_ONENAND=y +# CONFIG_NET is not set CONFIG_SYS_NS16550=y
configs/vct_platinum_small_defconfig +1 -2
@@ -17,10 +17,9 @@ CONFIG_CMD_IMLS=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set # CONFIG_ISO_PARTITION is not set CONFIG_ENV_IS_IN_FLASH=y +# CONFIG_NET is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y
configs/vct_platinumavc_defconfig +1 -0
@@ -16,3 +16,4 @@ CONFIG_CMD_DHCP=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y +# CONFIG_REGEX is not set
configs/vct_platinumavc_onenand_defconfig +1 -0
@@ -22,3 +22,4 @@ CONFIG_CMD_UBI=y # CONFIG_ISO_PARTITION is not set CONFIG_ENV_IS_IN_ONENAND=y CONFIG_SYS_NS16550=y +# CONFIG_REGEX is not set
configs/vct_platinumavc_onenand_small_defconfig +1 -2
@@ -19,8 +19,6 @@ CONFIG_CMD_ONENAND=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set CONFIG_CMD_JFFS2=y CONFIG_MTDIDS_DEFAULT="onenand0=onenand"
@@ -29,4 +27,5 @@ CONFIG_CMD_UBI=y # CONFIG_CMD_UBIFS is not set # CONFIG_ISO_PARTITION is not set CONFIG_ENV_IS_IN_ONENAND=y +# CONFIG_NET is not set CONFIG_SYS_NS16550=y
configs/vct_platinumavc_small_defconfig +1 -2
@@ -17,10 +17,9 @@ CONFIG_CMD_IMLS=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set # CONFIG_ISO_PARTITION is not set CONFIG_ENV_IS_IN_FLASH=y +# CONFIG_NET is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y
configs/vct_premium_onenand_small_defconfig +1 -2
@@ -19,8 +19,6 @@ CONFIG_CMD_ONENAND=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set CONFIG_CMD_JFFS2=y CONFIG_MTDIDS_DEFAULT="onenand0=onenand"
@@ -29,4 +27,5 @@ CONFIG_CMD_UBI=y # CONFIG_CMD_UBIFS is not set # CONFIG_ISO_PARTITION is not set CONFIG_ENV_IS_IN_ONENAND=y +# CONFIG_NET is not set CONFIG_SYS_NS16550=y
configs/vct_premium_small_defconfig +1 -2
@@ -17,10 +17,9 @@ CONFIG_CMD_IMLS=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set # CONFIG_ISO_PARTITION is not set CONFIG_ENV_IS_IN_FLASH=y +# CONFIG_NET is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y
configs/warp_defconfig +1 -0
@@ -25,6 +25,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_ENV_IS_IN_MMC=y +# CONFIG_NET is not set CONFIG_DFU_MMC=y CONFIG_USB=y CONFIG_USB_STORAGE=y
configs/xilinx_zynqmp_mini_emmc_defconfig +1 -2
@@ -35,11 +35,10 @@ CONFIG_CMD_MMC=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_EMBED=y +# CONFIG_NET is not set # CONFIG_DM_WARN is not set # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_DM_MMC=y
configs/xilinx_zynqmp_mini_nand_defconfig +1 -2
@@ -35,10 +35,9 @@ CONFIG_SYS_PROMPT="ZynqMP> " # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set # CONFIG_PARTITIONS is not set CONFIG_OF_EMBED=y +# CONFIG_NET is not set # CONFIG_DM_WARN is not set # CONFIG_DM_DEVICE_REMOVE is not set # CONFIG_MMC is not set
configs/zipitz2_defconfig +1 -2
@@ -13,12 +13,11 @@ CONFIG_CMD_MMC=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_ENV_IS_IN_FLASH=y +# CONFIG_NET is not set CONFIG_MTD_NOR_FLASH=y CONFIG_PXA_SERIAL=y CONFIG_USB=y
configs/zynq_cse_qspi_defconfig +1 -2
@@ -40,11 +40,10 @@ CONFIG_CMD_SF=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set # CONFIG_PARTITIONS is not set CONFIG_OF_EMBED=y +# CONFIG_NET is not set # CONFIG_DM_WARN is not set # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_SPL_DM_SEQ_ALIAS=y
configs/zynq_zc770_xm011_defconfig +1 -0
@@ -24,6 +24,7 @@ CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y CONFIG_CMD_NAND_LOCK_UNLOCK=y # CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set CONFIG_CMD_CACHE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set
configs/zynq_zc770_xm011_x16_defconfig +1 -0
@@ -24,6 +24,7 @@ CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y CONFIG_CMD_NAND_LOCK_UNLOCK=y # CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set CONFIG_CMD_CACHE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set
include/configs/topic_miami.h +0 -3
@@ -133,7 +133,4 @@ "fi; fi; run $modeboot"#undef CONFIG_DISPLAY_BOARDINFO -/* Further tweaks to reduce image size */ -#undef CONFIG_CMD_NET -#endif /* __CONFIG_TOPIC_MIAMI_H */
include/env_callback.h +1 -1
@@ -45,7 +45,7 @@#define DNS_CALLBACK #endif -#ifdef CONFIG_NET +#ifdef CONFIG_CMD_NET #define NET_CALLBACKS \ "bootfile:bootfile," \ "ipaddr:ipaddr," \
lib/efi_loader/Makefile +1 -1
@@ -21,5 +21,5 @@ obj-y += efi_file.o efi_variable.o efi_bootmgr.o efi_watchdog.o obj-$(CONFIG_LCD) += efi_gop.o obj-$(CONFIG_DM_VIDEO) += efi_gop.o obj-$(CONFIG_PARTITIONS) += efi_disk.o -obj-$(CONFIG_NET) += efi_net.o +obj-$(CONFIG_CMD_NET) += efi_net.o obj-$(CONFIG_GENERATE_SMBIOS_TABLE) += efi_smbios.o
lib/efi_loader/efi_device_path.c +1 -1
@@ -746,7 +746,7 @@ struct efi_device_path *efi_dp_from_file(struct blk_desc *desc, int part,return start; } -#ifdef CONFIG_NET +#ifdef CONFIG_CMD_NET struct efi_device_path *efi_dp_from_eth (void ) {struct efi_device_path_mac_addr *ndp;
net/Kconfig +11 -0
@@ -4,6 +4,7 @@ menuconfig NET bool "Networking support" + default y if NET
@@ -23,6 +24,7 @@ config NETCONSOLE config NET_TFTP_VARS bool "Control TFTP timeout and count through environment" + depends on CMD_NET default y help If set, allows controlling the TFTP timeout through the
@@ -33,30 +35,39 @@ config NET_TFTP_VARS config BOOTP_BOOTPATH bool "Enable BOOTP BOOTPATH" + depends on CMD_NET config BOOTP_DNS bool "Enable bootp DNS" + depends on CMD_NET config BOOTP_GATEWAY bool "Enable BOOTP gateway" + depends on CMD_NET config BOOTP_HOSTNAME bool "Enable BOOTP hostname" + depends on CMD_NET config BOOTP_PXE bool "Enable BOOTP PXE" + depends on CMD_NET config BOOTP_SUBNETMASK bool "Enable BOOTP subnetmask" + depends on CMD_NET + depends on CMD_NET config BOOTP_PXE_CLIENTARCH hex + depends on CMD_NET default 0x16 if ARM64 default 0x15 if ARM default 0 if X86 config BOOTP_VCI_STRING string + depends on CMD_NET default "U-Boot.armv7" if CPU_V7 || CPU_V7M default "U-Boot.armv8" if ARM64 default "U-Boot.arm" if ARM
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180227/23740448/attachment.sig>
PATCH v2 1/1 Kconfig: cmd: Make networking command dependent on NET
Quoted 15 lines · Tom Rini
Quoted 4 lines · Michal Simek
Enable networking command only when NET is enabled. And remove selecting NET for
CMD_NETSigned-off-by Michal Simek <[email protected]>Quoted 8 lines
---
Changes in v2:
- Check several boards by hand.There is a huge impact on defconfigs because of select NET. But this change makes sense to do but it just needs to be syncup properly. Do we have a tool for this kind of change?
Quoted 15 lines
So, I've applied this patch, with a good bit of modification. What I wasn't clear about before, sorry, was that we need to make NET default y in here too. However, we also have some decent areas of the code that use "
CONFIG_CMD_NET" when it really means "CONFIG_NET", at least conceptually. But in order to make everything work as-is today, and leave these fixes to a later point in time (as they are fixes and should happen) we change some areas today that referenceCONFIG_NETto referenceCONFIG_CMD_NET. Oncenet/gets cleaned up, we can useCONFIG_NETwithoutCONFIG_CMD_NETin more area. It's also not quite 100% size-neutral as the topic_miami* boards were playing some games that can't quite be done as they were before, but I believe the end result is they can now more easily and thoroughly disable the networking stuff that intended to be removed.
Hello Tom,
in spite of you comments above I do not understand why you changed cmd/bootefi.c to depend on CONFIG_CMD_NET instead of CONFIG_NET.
This was not part of Michal's patch.
I would prefer if changes would be sent to the list for review *before* being applied.
As the patch that you applied is not Michal's patch your authorship should be documented in the git log.
I cannot see any reason why network support should be disabled in bootefi if there are no network commands available.
Please, undo this change.
Best regards
Heinrich
PATCH v2 1/1 Kconfig: cmd: Make networking command dependent on NET
Quoted 32 lines · Heinrich Schuchardt
Quoted 15 lines · Tom Rini
Quoted 4 lines · Michal Simek
Enable networking command only when NET is enabled. And remove selecting NET for
CMD_NETSigned-off-by Michal Simek <[email protected]>Quoted 8 lines
---
Changes in v2:
- Check several boards by hand.There is a huge impact on defconfigs because of select NET. But this change makes sense to do but it just needs to be syncup properly. Do we have a tool for this kind of change?
Quoted 15 lines
So, I've applied this patch, with a good bit of modification. What I wasn't clear about before, sorry, was that we need to make NET default y in here too. However, we also have some decent areas of the code that use "
CONFIG_CMD_NET" when it really means "CONFIG_NET", at least conceptually. But in order to make everything work as-is today, and leave these fixes to a later point in time (as they are fixes and should happen) we change some areas today that referenceCONFIG_NETto referenceCONFIG_CMD_NET. Oncenet/gets cleaned up, we can useCONFIG_NETwithoutCONFIG_CMD_NETin more area. It's also not quite 100% size-neutral as the topic_miami* boards were playing some games that can't quite be done as they were before, but I believe the end result is they can now more easily and thoroughly disable the networking stuff that intended to be removed.
Quoted 4 lines
Hello Tom,
in spite of you comments above I do not understand why you changed
cmd/bootefi.cto depend onCONFIG_CMD_NETinstead ofCONFIG_NET.
Because the underlying generic network functionality that efi_loader uses is actually gated under CONFIG_CMD_NET and not CONFIG_NET. This should be corrected, in the long term.
Quoted 7 lines
This was not part of Michal's patch.
I would prefer if changes would be sent to the list for review *before* being applied.
As the patch that you applied is not Michal's patch your authorship should be documented in the git log.
Ah, I forgot to add my S-o-B? Oops, that was unintentional.
Quoted 2 lines
I cannot see any reason why network support should be disabled in bootefi if there are no network commands available.
In theory and concept, I agree. In current implementation, that is not the case and I would welcome further changes that make the code reflect the general intention.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180228/2dc49d1b/attachment.sig>
PATCH v2 1/1 Kconfig: cmd: Make networking command dependent on NET
Quoted 44 lines · Tom Rini
Quoted 32 lines · Heinrich Schuchardt
Quoted 15 lines · Tom Rini
Quoted 4 lines · Michal Simek
Enable networking command only when NET is enabled. And remove selecting NET for
CMD_NETSigned-off-by Michal Simek <[email protected]>Quoted 8 lines
---
Changes in v2:
- Check several boards by hand.There is a huge impact on defconfigs because of select NET. But this change makes sense to do but it just needs to be syncup properly. Do we have a tool for this kind of change?
Quoted 15 lines
So, I've applied this patch, with a good bit of modification. What I wasn't clear about before, sorry, was that we need to make NET default y in here too. However, we also have some decent areas of the code that use "
CONFIG_CMD_NET" when it really means "CONFIG_NET", at least conceptually. But in order to make everything work as-is today, and leave these fixes to a later point in time (as they are fixes and should happen) we change some areas today that referenceCONFIG_NETto referenceCONFIG_CMD_NET. Oncenet/gets cleaned up, we can useCONFIG_NETwithoutCONFIG_CMD_NETin more area. It's also not quite 100% size-neutral as the topic_miami* boards were playing some games that can't quite be done as they were before, but I believe the end result is they can now more easily and thoroughly disable the networking stuff that intended to be removed.Quoted 4 lines
Hello Tom,
in spite of you comments above I do not understand why you changed
cmd/bootefi.cto depend onCONFIG_CMD_NETinstead ofCONFIG_NET.Because the underlying generic network functionality that
efi_loaderuses is actually gated underCONFIG_CMD_NETand notCONFIG_NET. This should be corrected, in the long term.Quoted 2 lines
This was not part of Michal's patch.
Quoted 7 lines
Quoted 5 lines
I would prefer if changes would be sent to the list for review *before* being applied.
As the patch that you applied is not Michal's patch your authorship should be documented in the git log.
Ah, I forgot to add my S-o-B? Oops, that was unintentional.
It is not that your Signed-of-by is missing. But your signature follows directly Michal's. So it looks as if you applied the patch signed by Michal unchanged.
Best regards
Heinrich
Quoted 8 lines
Quoted 3 lines
I cannot see any reason why network support should be disabled in bootefi if there are no network commands available.
In theory and concept, I agree. In current implementation, that is not the case and I would welcome further changes that make the code reflect the general intention.
PATCH v2 1/1 Kconfig: cmd: Make networking command dependent on NET
In reply to Heinrich SchuchardtHi Heinrich,
Quoted 41 lines · Heinrich Schuchardt
Quoted 17 lines · Tom Rini
Quoted 4 lines · Michal Simek
Enable networking command only when NET is enabled. And remove selecting NET for
CMD_NETSigned-off-by Michal Simek <[email protected]>Quoted 8 lines
---
Changes in v2:
- Check several boards by hand.There is a huge impact on defconfigs because of select NET. But this change makes sense to do but it just needs to be syncup properly. Do we have a tool for this kind of change?
Quoted 15 lines
So, I've applied this patch, with a good bit of modification. What I wasn't clear about before, sorry, was that we need to make NET default y in here too. However, we also have some decent areas of the code that use "
CONFIG_CMD_NET" when it really means "CONFIG_NET", at least conceptually. But in order to make everything work as-is today, and leave these fixes to a later point in time (as they are fixes and should happen) we change some areas today that referenceCONFIG_NETto referenceCONFIG_CMD_NET. Oncenet/gets cleaned up, we can useCONFIG_NETwithoutCONFIG_CMD_NETin more area. It's also not quite 100% size-neutral as the topic_miami* boards were playing some games that can't quite be done as they were before, but I believe the end result is they can now more easily and thoroughly disable the networking stuff that intended to be removed.Hello Tom,
in spite of you comments above I do not understand why you changed
cmd/bootefi.cto depend onCONFIG_CMD_NETinstead ofCONFIG_NET.This was not part of Michal's patch.
Quoted 8 lines
I would prefer if changes would be sent to the list for review *before* being applied.
As the patch that you applied is not Michal's patch your authorship should be documented in the git log.
I cannot see any reason why network support should be disabled in bootefi if there are no network commands available.
I think there is a fair amount of conflation since some of the basic functions like bootp and dhcp are only accessible through the commands, but you're right that it should be possible to use networking with a static IP and no network commands.
Quoted 11 lines
Please, undo this change.
Best regards
Heinrich
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
PATCH v2 1/1 Kconfig: cmd: Make networking command dependent on NET
Quoted 51 lines · Joe Hershberger
Hi Heinrich,
Quoted 47 lines · Heinrich Schuchardt
Quoted 17 lines · Tom Rini
Quoted 4 lines · Michal Simek
Enable networking command only when NET is enabled. And remove selecting NET for
CMD_NETSigned-off-by Michal Simek <[email protected]>Quoted 8 lines
---
Changes in v2:
- Check several boards by hand.There is a huge impact on defconfigs because of select NET. But this change makes sense to do but it just needs to be syncup properly. Do we have a tool for this kind of change?
Quoted 15 lines
So, I've applied this patch, with a good bit of modification. What I wasn't clear about before, sorry, was that we need to make NET default y in here too. However, we also have some decent areas of the code that use "
CONFIG_CMD_NET" when it really means "CONFIG_NET", at least conceptually. But in order to make everything work as-is today, and leave these fixes to a later point in time (as they are fixes and should happen) we change some areas today that referenceCONFIG_NETto referenceCONFIG_CMD_NET. Oncenet/gets cleaned up, we can useCONFIG_NETwithoutCONFIG_CMD_NETin more area. It's also not quite 100% size-neutral as the topic_miami* boards were playing some games that can't quite be done as they were before, but I believe the end result is they can now more easily and thoroughly disable the networking stuff that intended to be removed.Hello Tom,
in spite of you comments above I do not understand why you changed
cmd/bootefi.cto depend onCONFIG_CMD_NETinstead ofCONFIG_NET.This was not part of Michal's patch.
I would prefer if changes would be sent to the list for review *before* being applied.
As the patch that you applied is not Michal's patch your authorship should be documented in the git log.
Quoted 7 lines
Quoted 2 lines
I cannot see any reason why network support should be disabled in bootefi if there are no network commands available.
I think there is a fair amount of conflation since some of the basic functions like bootp and dhcp are only accessible through the commands, but you're right that it should be possible to use networking with a static IP and no network commands.
Can you please be more specific how you can use network without network commands?
Thanks,
Michal
PATCH v2 1/1 Kconfig: cmd: Make networking command dependent on NET
Quoted 55 lines · Michal Simek
Quoted 54 lines · Joe Hershberger
Hi Heinrich,
Quoted 49 lines · Heinrich Schuchardt
Quoted 17 lines · Tom Rini
Quoted 4 lines · Michal Simek
Enable networking command only when NET is enabled. And remove selecting NET for
CMD_NETSigned-off-by Michal Simek <[email protected]>Quoted 8 lines
---
Changes in v2:
- Check several boards by hand.There is a huge impact on defconfigs because of select NET. But this change makes sense to do but it just needs to be syncup properly. Do we have a tool for this kind of change?
Quoted 15 lines
So, I've applied this patch, with a good bit of modification. What I wasn't clear about before, sorry, was that we need to make NET default y in here too. However, we also have some decent areas of the code that use "
CONFIG_CMD_NET" when it really means "CONFIG_NET", at least conceptually. But in order to make everything work as-is today, and leave these fixes to a later point in time (as they are fixes and should happen) we change some areas today that referenceCONFIG_NETto referenceCONFIG_CMD_NET. Oncenet/gets cleaned up, we can useCONFIG_NETwithoutCONFIG_CMD_NETin more area. It's also not quite 100% size-neutral as the topic_miami* boards were playing some games that can't quite be done as they were before, but I believe the end result is they can now more easily and thoroughly disable the networking stuff that intended to be removed.Hello Tom,
in spite of you comments above I do not understand why you changed
cmd/bootefi.cto depend onCONFIG_CMD_NETinstead ofCONFIG_NET.This was not part of Michal's patch.
I would prefer if changes would be sent to the list for review *before* being applied.
As the patch that you applied is not Michal's patch your authorship should be documented in the git log.
I cannot see any reason why network support should be disabled in bootefi if there are no network commands available.
Quoted 7 lines
Quoted 4 lines
I think there is a fair amount of conflation since some of the basic functions like bootp and dhcp are only accessible through the commands, but you're right that it should be possible to use networking with a static IP and no network commands.
Can you please be more specific how you can use network without network commands?
In this case, if EFI is using the network, then U-Boot need not have any commands that use it. NetConsole is probably another example.
-Joe