Set name of regmap_config
Subsystems (9)
v3 cover Set name of regmap_config
After 9b947a13e7f6 ("regmap: use debugfs even when no device"), we are allowing regmap to create debugfs without a valid device. Some of them would end up using "dummy*" as debugfs name.
This series try to set names in some regmap_config to avoid that.
Changes in v3:
Modify commit message.
Jeffy Chen (4):
mfd: syscon: Set name of regmap_config
rtc: at91sam9: Pass pdev->dev to regmap_init_mmio()
clk: lpc32xx: Set name of regmap_config
ARM: rockchip: Set name of regmap_config
arch/arm/mach-rockchip/platsmp.c | 1 + drivers/clk/nxp/clk-lpc32xx.c | 1 + drivers/mfd/syscon.c | 1 + drivers/rtc/rtc-at91sam9.c | 2 +- 4 files changed, 4 insertions(+), 1 deletion(-)
Signature · 1 line
2.11.0
PATCH v3 1/4 mfd: syscon: Set name of regmap_config
We are now allowing to register debugfs without a valid device, and not having a valid name will end up using "dummy*" to create debugfs dir.
---
Changes in v3:
Modify commit message.
drivers/mfd/syscon.c | 1 + 1 file changed, 1 insertion(+)
drivers/mfd/syscon.c +1 -0
@@ -110,6 +110,7 @@ static struct syscon *of_syscon_register(struct device_node *np) syscon_config.reg_stride = reg_io_width; syscon_config.val_bits = reg_io_width *8 ; syscon_config.max_register =resource_size (&res) - reg_io_width; + syscon_config.name =of_node_full_name (np); regmap =regmap_init_mmio (NULL , base, &syscon_config);if (IS_ERR (regmap)) {
Signature · 1 line
2.11.0
PATCH v3 2/4 rtc: at91sam9: Pass pdev->dev to regmap_init_mmio()
In reply to Jeffy ChenOtherwise it would use "dummy*" to create regmap debugfs dir.
---
Changes in v3: None
drivers/rtc/rtc-at91sam9.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/rtc/rtc-at91sam9.c +1 -1
@@ -402,7 +402,7 @@ static int at91_rtc_probe(struct platform_device *pdev)if (IS_ERR (gpbr))return PTR_ERR (gpbr); - rtc->gpbr =regmap_init_mmio (NULL , gpbr, + rtc->gpbr =regmap_init_mmio (&pdev->dev, gpbr, &gpbr_regmap_config); }else {struct of_phandle_args args;
Signature · 1 line
2.11.0
Alexandre Belloni
maintainerRe: [PATCH v3 2/4] rtc: at91sam9: Pass pdev->dev to regmap_init_mmio()
Quoted 15 lines · Jeffy Chen
Otherwise it would use "dummy*" to create regmap debugfs dir.
Signed-off-by Jeffy Chen <[email protected]>---
Changes in v3: None
drivers/rtc/rtc-at91sam9.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/rtc/rtc-at91sam9.c +0
-0
drivers/rtc/rtc-at91sam9.c static int at91_rtc_probe(struct platform_device *pdev) · line 406
Quoted 6 lines
drivers/rtc/rtc-at91sam9.c +1
-1@@ -402,7 +402,7 @@ static int at91_rtc_probe(struct platform_device *pdev)if (IS_ERR (gpbr))return PTR_ERR (gpbr); - rtc->gpbr =regmap_init_mmio (NULL , gpbr, + rtc->gpbr =regmap_init_mmio (&pdev->dev, gpbr, &gpbr_regmap_config);
This would be misleading as the gpbr is not directly related to the rtc.
Signature · 3 lines
Alexandre Belloni, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com
Re: [PATCH v3 2/4] rtc: at91sam9: Pass pdev->dev to regmap_init_mmio()
Hi Alexandre,
Quoted 19 lines · Alexandre Belloni
Quoted 18 lines · Jeffy Chen
Otherwise it would use "dummy*" to create regmap debugfs dir.
Signed-off-by Jeffy Chen <[email protected]>---
Changes in v3: None
drivers/rtc/rtc-at91sam9.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/rtc/rtc-at91sam9.c +0
-0@@ -402,7 +402,7 @@ static int at91_rtc_probe(struct platform_device *pdev)if (IS_ERR (gpbr))return PTR_ERR (gpbr);
Quoted 5 lines
drivers/rtc/rtc-at91sam9.c static int at91_rtc_probe(struct platform_device *pdev) · line 406
Quoted 3 lines
drivers/rtc/rtc-at91sam9.c +1
-1- rtc->gpbr =regmap_init_mmio (NULL , gpbr, + rtc->gpbr =regmap_init_mmio (&pdev->dev, gpbr, &gpbr_regmap_config);This would be misleading as the gpbr is not directly related to the rtc.
ok, will fix that, thanks.
Quoted 1 line
PATCH v3 3/4 clk: lpc32xx: Set name of regmap_config
In reply to Jeffy ChenWe are now allowing to register debugfs without a valid device, and not having a valid name will end up using "dummy*" to create debugfs dir.
---
Changes in v3: None
drivers/clk/nxp/clk-lpc32xx.c | 1 + 1 file changed, 1 insertion(+)
drivers/clk/nxp/clk-lpc32xx.c +1 -0
@@ -67,6 +67,7 @@#define LPC32XX_USB_CLK_STS 0xF8static struct regmap_config lpc32xx_scb_regmap_config = { + .name ="lpc32xx-scb" , .reg_bits =32 , .val_bits =32 , .reg_stride =4 ,
Signature · 1 line
2.11.0
PATCH v3 4/4 ARM: rockchip: Set name of regmap_config
In reply to Jeffy ChenWe are now allowing to register debugfs without a valid device, and not having a valid name will end up using "dummy*" to create debugfs dir.
---
Changes in v3: None
arch/arm/mach-rockchip/platsmp.c | 1 + 1 file changed, 1 insertion(+)
arch/arm/mach-rockchip/platsmp.c +1 -0
@@ -208,6 +208,7 @@ static int __init rockchip_smp_prepare_sram(struct device_node *node) }static const struct regmap_config rockchip_pmu_regmap_config = { + .name ="rockchip-pmu" , .reg_bits =32 , .val_bits =32 , .reg_stride =4 ,
Signature · 1 line
2.11.0