iotests: Avoid realpath, for CentOS 6
PATCH v2 1/1 iotests: Avoid realpath, for CentOS 6
CentOS 6 lacks a realpath binary on the base install, which makes all iotests runs fail since the 2.11 release:
001 - output mismatch (see 001.out.bad)
./check: line 815: realpath: command not found
diff: missing operand after `/home/dummy/qemu/tests/qemu-iotests/001.out'
diff: Try `diff --help' for more information.
Many of the uses of 'realpath' in the check script were being used on the output of 'type -p' - but that is already an absolute file name. While a canonical name can often be shorter (realpath gets rid of /../), it can also be longer (due to symlink expansion); and we really don't care if the name is canonical, merely that it was an executable file with an absolute path. These were broken in commit cceaf1db.
The remaining use of realpath was to convert a possibly relative filename into an absolute one before calling diff to make it easier to copy-and-paste the filename for moving the .bad file into place as the new reference file even when running iotests out-of-tree (see commit 93e53fb6), but $PWD can achieve the same purpose.
---
v2: Don't revert 93e53fb6, add commit id mentions in commit message, retitle
--- tests/qemu-iotests/check | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
tests/qemu-iotests/check +6 -6
@@ -92,7 +92,7 @@ set_prog_path() { p=`command -v $1 2> /dev/null` if [ -n "$p" -a -x "$p" ]; then - realpath -- "$(type -p "$p")" + type -p "$p" else return 1 fi
@@ -554,7 +554,7 @@ then [ "$QEMU_PROG" = "" ] && _init_error "qemu not found" fi fi -export QEMU_PROG=$(realpath -- "$(type -p "$QEMU_PROG")") +export QEMU_PROG="$(type -p "$QEMU_PROG")" if [ -z "$QEMU_IMG_PROG" ]; then if [ -x "$build_iotests/qemu-img" ]; then
@@ -565,7 +565,7 @@ if [ -z "$QEMU_IMG_PROG" ]; then _init_error "qemu-img not found" fi fi -export QEMU_IMG_PROG=$(realpath -- "$(type -p "$QEMU_IMG_PROG")") +export QEMU_IMG_PROG="$(type -p "$QEMU_IMG_PROG")" if [ -z "$QEMU_IO_PROG" ]; then if [ -x "$build_iotests/qemu-io" ]; then
@@ -576,7 +576,7 @@ if [ -z "$QEMU_IO_PROG" ]; then _init_error "qemu-io not found" fi fi -export QEMU_IO_PROG=$(realpath -- "$(type -p "$QEMU_IO_PROG")") +export QEMU_IO_PROG="$(type -p "$QEMU_IO_PROG")" if [ -z $QEMU_NBD_PROG ]; then if [ -x "$build_iotests/qemu-nbd" ]; then
@@ -587,7 +587,7 @@ if [ -z $QEMU_NBD_PROG ]; then _init_error "qemu-nbd not found" fi fi -export QEMU_NBD_PROG=$(realpath -- "$(type -p "$QEMU_NBD_PROG")") +export QEMU_NBD_PROG="$(type -p "$QEMU_NBD_PROG")" if [ -z "$QEMU_VXHS_PROG" ]; then export QEMU_VXHS_PROG="`set_prog_path qnio_server`"
@@ -811,7 +811,7 @@ do else echo " - output mismatch (see $seq.out.bad)" mv $tmp.out $seq.out.bad - $diff -w "$reference" $(realpath $seq.out.bad) + $diff -w "$reference" "$PWD"/$seq.out.bad err=true fi fi
Signature · 1 line
2.14.3
Quoted 83 lines · Eric Blake
CentOS 6 lacks a realpath binary on the base install, which makes all iotests runs fail since the 2.11 release:
001 - output mismatch (see 001.out.bad)
./check: line 815: realpath: command not found
diff: missing operand after `/home/dummy/qemu/tests/qemu-iotests/001.out'
diff: Try `diff --help' for more information.Many of the uses of 'realpath' in the check script were being used on the output of 'type -p' - but that is already an absolute file name. While a canonical name can often be shorter (realpath gets rid of /../), it can also be longer (due to symlink expansion); and we really don't care if the name is canonical, merely that it was an executable file with an absolute path. These were broken in commit
cceaf1db.The remaining use of realpath was to convert a possibly relative filename into an absolute one before calling diff to make it easier to copy-and-paste the filename for moving the .bad file into place as the new reference file even when running iotests out-of-tree (see commit
93e53fb6), but $PWD can achieve the same purpose.Signed-off-by Eric Blake <[email protected]>---
v2: Don't revert93e53fb6, add commit id mentions in commit message, retitle--- tests/qemu-iotests/check | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)tests/qemu-iotests/check +5
-5@@ -92,7 +92,7 @@ set_prog_path() { p=`command -v $1 2> /dev/null` if [ -n "$p" -a -x "$p" ]; then - realpath -- "$(type -p "$p")" + type -p "$p" else return 1 fi@@ -554,7 +554,7 @@ then [ "$QEMU_PROG" = "" ] && _init_error "qemu not found" fi fi -export QEMU_PROG=$(realpath -- "$(type -p "$QEMU_PROG")") +export QEMU_PROG="$(type -p "$QEMU_PROG")" if [ -z "$QEMU_IMG_PROG" ]; then if [ -x "$build_iotests/qemu-img" ]; then@@ -565,7 +565,7 @@ if [ -z "$QEMU_IMG_PROG" ]; then _init_error "qemu-img not found" fi fi -export QEMU_IMG_PROG=$(realpath -- "$(type -p "$QEMU_IMG_PROG")") +export QEMU_IMG_PROG="$(type -p "$QEMU_IMG_PROG")" if [ -z "$QEMU_IO_PROG" ]; then if [ -x "$build_iotests/qemu-io" ]; then@@ -576,7 +576,7 @@ if [ -z "$QEMU_IO_PROG" ]; then _init_error "qemu-io not found" fi fi -export QEMU_IO_PROG=$(realpath -- "$(type -p "$QEMU_IO_PROG")") +export QEMU_IO_PROG="$(type -p "$QEMU_IO_PROG")" if [ -z $QEMU_NBD_PROG ]; then if [ -x "$build_iotests/qemu-nbd" ]; then@@ -587,7 +587,7 @@ if [ -z $QEMU_NBD_PROG ]; then _init_error "qemu-nbd not found" fi fi -export QEMU_NBD_PROG=$(realpath -- "$(type -p "$QEMU_NBD_PROG")") +export QEMU_NBD_PROG="$(type -p "$QEMU_NBD_PROG")" if [ -z "$QEMU_VXHS_PROG" ]; then export QEMU_VXHS_PROG="`set_prog_path qnio_server`"
tests/qemu-iotests/check do · line 817
Quoted 8 lines
tests/qemu-iotests/check +1
-1@@ -811,7 +811,7 @@ do else echo " - output mismatch (see $seq.out.bad)" mv $tmp.out $seq.out.bad - $diff -w "$reference" $(realpath $seq.out.bad) + $diff -w "$reference" "$PWD"/$seq.out.bad err=true fi fi
Quoted 94 lines · Eric Blake
CentOS 6 lacks a realpath binary on the base install, which makes all iotests runs fail since the 2.11 release:
001 - output mismatch (see 001.out.bad)
./check: line 815: realpath: command not found
diff: missing operand after `/home/dummy/qemu/tests/qemu-iotests/001.out'
diff: Try `diff --help' for more information.Many of the uses of 'realpath' in the check script were being used on the output of 'type -p' - but that is already an absolute file name. While a canonical name can often be shorter (realpath gets rid of /../), it can also be longer (due to symlink expansion); and we really don't care if the name is canonical, merely that it was an executable file with an absolute path. These were broken in commit
cceaf1db.The remaining use of realpath was to convert a possibly relative filename into an absolute one before calling diff to make it easier to copy-and-paste the filename for moving the .bad file into place as the new reference file even when running iotests out-of-tree (see commit
93e53fb6), but $PWD can achieve the same purpose.Signed-off-by Eric Blake <[email protected]>---
v2: Don't revert93e53fb6, add commit id mentions in commit message, retitle--- tests/qemu-iotests/check | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)tests/qemu-iotests/check +6
-6@@ -92,7 +92,7 @@ set_prog_path() { p=`command -v $1 2> /dev/null` if [ -n "$p" -a -x "$p" ]; then - realpath -- "$(type -p "$p")" + type -p "$p" else return 1 fi@@ -554,7 +554,7 @@ then [ "$QEMU_PROG" = "" ] && _init_error "qemu not found" fi fi -export QEMU_PROG=$(realpath -- "$(type -p "$QEMU_PROG")") +export QEMU_PROG="$(type -p "$QEMU_PROG")" if [ -z "$QEMU_IMG_PROG" ]; then if [ -x "$build_iotests/qemu-img" ]; then@@ -565,7 +565,7 @@ if [ -z "$QEMU_IMG_PROG" ]; then _init_error "qemu-img not found" fi fi -export QEMU_IMG_PROG=$(realpath -- "$(type -p "$QEMU_IMG_PROG")") +export QEMU_IMG_PROG="$(type -p "$QEMU_IMG_PROG")" if [ -z "$QEMU_IO_PROG" ]; then if [ -x "$build_iotests/qemu-io" ]; then@@ -576,7 +576,7 @@ if [ -z "$QEMU_IO_PROG" ]; then _init_error "qemu-io not found" fi fi -export QEMU_IO_PROG=$(realpath -- "$(type -p "$QEMU_IO_PROG")") +export QEMU_IO_PROG="$(type -p "$QEMU_IO_PROG")" if [ -z $QEMU_NBD_PROG ]; then if [ -x "$build_iotests/qemu-nbd" ]; then@@ -587,7 +587,7 @@ if [ -z $QEMU_NBD_PROG ]; then _init_error "qemu-nbd not found" fi fi -export QEMU_NBD_PROG=$(realpath -- "$(type -p "$QEMU_NBD_PROG")") +export QEMU_NBD_PROG="$(type -p "$QEMU_NBD_PROG")" if [ -z "$QEMU_VXHS_PROG" ]; then export QEMU_VXHS_PROG="`set_prog_path qnio_server`"@@ -811,7 +811,7 @@ do else echo " - output mismatch (see $seq.out.bad)" mv $tmp.out $seq.out.bad - $diff -w "$reference" $(realpath $seq.out.bad) + $diff -w "$reference" "$PWD"/$seq.out.bad err=true fi fiSignature · 1 line
2.14.3
Quoted 16 lines · Eric Blake
CentOS 6 lacks a realpath binary on the base install, which makes all iotests runs fail since the 2.11 release:
001 - output mismatch (see 001.out.bad)
./check: line 815: realpath: command not found
diff: missing operand after `/home/dummy/qemu/tests/qemu-iotests/001.out'
diff: Try `diff --help' for more information.Many of the uses of 'realpath' in the check script were being used on the output of 'type -p' - but that is already an absolute file name. While a canonical name can often be shorter (realpath gets rid of /../), it can also be longer (due to symlink expansion); and we really don't care if the name is canonical, merely that it was an executable file with an absolute path. These were broken in commit
cceaf1db.
Quoted 8 lines
The remaining use of realpath was to convert a possibly relative filename into an absolute one before calling diff to make it easier to copy-and-paste the filename for moving the .bad file into place as the new reference file even when running iotests out-of-tree (see commit
93e53fb6), but $PWD can achieve the same purpose.Signed-off-by Eric Blake <[email protected]>
TIL type -p :)
Quoted 67 lines
---
v2: Don't revert93e53fb6, add commit id mentions in commit message, retitle--- tests/qemu-iotests/check | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)tests/qemu-iotests/check +6
-6@@ -92,7 +92,7 @@ set_prog_path() { p=`command -v $1 2> /dev/null` if [ -n "$p" -a -x "$p" ]; then - realpath -- "$(type -p "$p")" + type -p "$p" else return 1 fi@@ -554,7 +554,7 @@ then [ "$QEMU_PROG" = "" ] && _init_error "qemu not found" fi fi -export QEMU_PROG=$(realpath -- "$(type -p "$QEMU_PROG")") +export QEMU_PROG="$(type -p "$QEMU_PROG")" if [ -z "$QEMU_IMG_PROG" ]; then if [ -x "$build_iotests/qemu-img" ]; then@@ -565,7 +565,7 @@ if [ -z "$QEMU_IMG_PROG" ]; then _init_error "qemu-img not found" fi fi -export QEMU_IMG_PROG=$(realpath -- "$(type -p "$QEMU_IMG_PROG")") +export QEMU_IMG_PROG="$(type -p "$QEMU_IMG_PROG")" if [ -z "$QEMU_IO_PROG" ]; then if [ -x "$build_iotests/qemu-io" ]; then@@ -576,7 +576,7 @@ if [ -z "$QEMU_IO_PROG" ]; then _init_error "qemu-io not found" fi fi -export QEMU_IO_PROG=$(realpath -- "$(type -p "$QEMU_IO_PROG")") +export QEMU_IO_PROG="$(type -p "$QEMU_IO_PROG")" if [ -z $QEMU_NBD_PROG ]; then if [ -x "$build_iotests/qemu-nbd" ]; then@@ -587,7 +587,7 @@ if [ -z $QEMU_NBD_PROG ]; then _init_error "qemu-nbd not found" fi fi -export QEMU_NBD_PROG=$(realpath -- "$(type -p "$QEMU_NBD_PROG")") +export QEMU_NBD_PROG="$(type -p "$QEMU_NBD_PROG")" if [ -z "$QEMU_VXHS_PROG" ]; then export QEMU_VXHS_PROG="`set_prog_path qnio_server`"@@ -811,7 +811,7 @@ do else echo " - output mismatch (see $seq.out.bad)" mv $tmp.out $seq.out.bad - $diff -w "$reference" $(realpath $seq.out.bad) + $diff -w "$reference" "$PWD"/$seq.out.bad err=true fi fi
Kevin Wolf
AppliedAm 15.03.2018 um 12:51 hat Eric Blake geschrieben:
Quoted 16 lines
CentOS 6 lacks a realpath binary on the base install, which makes all iotests runs fail since the 2.11 release:
001 - output mismatch (see 001.out.bad)
./check: line 815: realpath: command not found
diff: missing operand after `/home/dummy/qemu/tests/qemu-iotests/001.out'
diff: Try `diff --help' for more information.Many of the uses of 'realpath' in the check script were being used on the output of 'type -p' - but that is already an absolute file name. While a canonical name can often be shorter (realpath gets rid of /../), it can also be longer (due to symlink expansion); and we really don't care if the name is canonical, merely that it was an executable file with an absolute path. These were broken in commit
cceaf1db.
Quoted 8 lines
The remaining use of realpath was to convert a possibly relative filename into an absolute one before calling diff to make it easier to copy-and-paste the filename for moving the .bad file into place as the new reference file even when running iotests out-of-tree (see commit
93e53fb6), but $PWD can achieve the same purpose.Signed-off-by Eric Blake <[email protected]>
Thanks, applied to the block branch.
Kevin