Skip to contentSkip to conversation

iotests: Avoid realpath, for CentOS 6

PATCH Applied Eric Blake 5 participants 5 messages Mar 15, 2018 – Mar 16, 2018

lore
Share & tools
lore

Eric Blake

author
#0 lore raw

PATCH v2 1/1 iotests: Avoid realpath, for CentOS 6

CentOS 6 lacks a realpath binary on the base install, which makes all iotests runs fail since the 2.11 release:

001 - output mismatch (see 001.out.bad)
./check: line 815: realpath: command not found
diff: missing operand after `/home/dummy/qemu/tests/qemu-iotests/001.out'
diff: Try `diff --help' for more information.

Many of the uses of 'realpath' in the check script were being used on the output of 'type -p' - but that is already an absolute file name. While a canonical name can often be shorter (realpath gets rid of /../), it can also be longer (due to symlink expansion); and we really don't care if the name is canonical, merely that it was an executable file with an absolute path. These were broken in commit cceaf1db.

The remaining use of realpath was to convert a possibly relative filename into an absolute one before calling diff to make it easier to copy-and-paste the filename for moving the .bad file into place as the new reference file even when running iotests out-of-tree (see commit 93e53fb6), but $PWD can achieve the same purpose.

---
v2: Don't revert 93e53fb6, add commit id mentions in commit message, retitle

---
 tests/qemu-iotests/check | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
tests/qemu-iotests/check +6 -6
index 469142cd586..ec8033350d1 100755
@@ -92,7 +92,7 @@ set_prog_path()
 {
     p=`command -v $1 2> /dev/null`
     if [ -n "$p" -a -x "$p" ]; then
-        realpath -- "$(type -p "$p")"
+        type -p "$p"
     else
         return 1
     fi
@@ -554,7 +554,7 @@ then
         [ "$QEMU_PROG" = "" ] && _init_error "qemu not found"
     fi
 fi
-export QEMU_PROG=$(realpath -- "$(type -p "$QEMU_PROG")")
+export QEMU_PROG="$(type -p "$QEMU_PROG")"
 
 if [ -z "$QEMU_IMG_PROG" ]; then
     if [ -x "$build_iotests/qemu-img" ]; then
@@ -565,7 +565,7 @@ if [ -z "$QEMU_IMG_PROG" ]; then
         _init_error "qemu-img not found"
     fi
 fi
-export QEMU_IMG_PROG=$(realpath -- "$(type -p "$QEMU_IMG_PROG")")
+export QEMU_IMG_PROG="$(type -p "$QEMU_IMG_PROG")"
 
 if [ -z "$QEMU_IO_PROG" ]; then
     if [ -x "$build_iotests/qemu-io" ]; then
@@ -576,7 +576,7 @@ if [ -z "$QEMU_IO_PROG" ]; then
         _init_error "qemu-io not found"
     fi
 fi
-export QEMU_IO_PROG=$(realpath -- "$(type -p "$QEMU_IO_PROG")")
+export QEMU_IO_PROG="$(type -p "$QEMU_IO_PROG")"
 
 if [ -z $QEMU_NBD_PROG ]; then
     if [ -x "$build_iotests/qemu-nbd" ]; then
@@ -587,7 +587,7 @@ if [ -z $QEMU_NBD_PROG ]; then
         _init_error "qemu-nbd not found"
     fi
 fi
-export QEMU_NBD_PROG=$(realpath -- "$(type -p "$QEMU_NBD_PROG")")
+export QEMU_NBD_PROG="$(type -p "$QEMU_NBD_PROG")"
 
 if [ -z "$QEMU_VXHS_PROG" ]; then
   export QEMU_VXHS_PROG="`set_prog_path qnio_server`"
@@ -811,7 +811,7 @@ do
                 else
                     echo " - output mismatch (see $seq.out.bad)"
                     mv $tmp.out $seq.out.bad
-                    $diff -w "$reference" $(realpath $seq.out.bad)
+                    $diff -w "$reference" "$PWD"/$seq.out.bad
                     err=true
                 fi
             fi
Signature · 1 line
2.14.3
Reviewed-by on v2 1/1
#1 lore raw
Quoted 83 lines · Eric Blake

CentOS 6 lacks a realpath binary on the base install, which makes all iotests runs fail since the 2.11 release:

001 - output mismatch (see 001.out.bad)
./check: line 815: realpath: command not found
diff: missing operand after `/home/dummy/qemu/tests/qemu-iotests/001.out'
diff: Try `diff --help' for more information.

Many of the uses of 'realpath' in the check script were being used on the output of 'type -p' - but that is already an absolute file name. While a canonical name can often be shorter (realpath gets rid of /../), it can also be longer (due to symlink expansion); and we really don't care if the name is canonical, merely that it was an executable file with an absolute path. These were broken in commit cceaf1db.

The remaining use of realpath was to convert a possibly relative filename into an absolute one before calling diff to make it easier to copy-and-paste the filename for moving the .bad file into place as the new reference file even when running iotests out-of-tree (see commit 93e53fb6), but $PWD can achieve the same purpose.

---
v2: Don't revert 93e53fb6, add commit id mentions in commit message, retitle

---
 tests/qemu-iotests/check | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
tests/qemu-iotests/check +5 -5
index 469142cd586..ec8033350d1 100755
@@ -92,7 +92,7 @@ set_prog_path()
 {
     p=`command -v $1 2> /dev/null`
     if [ -n "$p" -a -x "$p" ]; then
-        realpath -- "$(type -p "$p")"
+        type -p "$p"
     else
         return 1
     fi
@@ -554,7 +554,7 @@ then
         [ "$QEMU_PROG" = "" ] && _init_error "qemu not found"
     fi
 fi
-export QEMU_PROG=$(realpath -- "$(type -p "$QEMU_PROG")")
+export QEMU_PROG="$(type -p "$QEMU_PROG")"
 
 if [ -z "$QEMU_IMG_PROG" ]; then
     if [ -x "$build_iotests/qemu-img" ]; then
@@ -565,7 +565,7 @@ if [ -z "$QEMU_IMG_PROG" ]; then
         _init_error "qemu-img not found"
     fi
 fi
-export QEMU_IMG_PROG=$(realpath -- "$(type -p "$QEMU_IMG_PROG")")
+export QEMU_IMG_PROG="$(type -p "$QEMU_IMG_PROG")"
 
 if [ -z "$QEMU_IO_PROG" ]; then
     if [ -x "$build_iotests/qemu-io" ]; then
@@ -576,7 +576,7 @@ if [ -z "$QEMU_IO_PROG" ]; then
         _init_error "qemu-io not found"
     fi
 fi
-export QEMU_IO_PROG=$(realpath -- "$(type -p "$QEMU_IO_PROG")")
+export QEMU_IO_PROG="$(type -p "$QEMU_IO_PROG")"
 
 if [ -z $QEMU_NBD_PROG ]; then
     if [ -x "$build_iotests/qemu-nbd" ]; then
@@ -587,7 +587,7 @@ if [ -z $QEMU_NBD_PROG ]; then
         _init_error "qemu-nbd not found"
     fi
 fi
-export QEMU_NBD_PROG=$(realpath -- "$(type -p "$QEMU_NBD_PROG")")
+export QEMU_NBD_PROG="$(type -p "$QEMU_NBD_PROG")"
 
 if [ -z "$QEMU_VXHS_PROG" ]; then
   export QEMU_VXHS_PROG="`set_prog_path qnio_server`"

tests/qemu-iotests/check do · line 817

Quoted 8 lines
tests/qemu-iotests/check +1 -1
@@ -811,7 +811,7 @@ do
                 else
                     echo " - output mismatch (see $seq.out.bad)"
                     mv $tmp.out $seq.out.bad
-                    $diff -w "$reference" $(realpath $seq.out.bad)
+                    $diff -w "$reference" "$PWD"/$seq.out.bad
                     err=true
                 fi
             fi
Reviewed-by on v2 1/1
#2 lore raw
In reply to Eric Blake
Quoted 94 lines · Eric Blake

CentOS 6 lacks a realpath binary on the base install, which makes all iotests runs fail since the 2.11 release:

001 - output mismatch (see 001.out.bad)
./check: line 815: realpath: command not found
diff: missing operand after `/home/dummy/qemu/tests/qemu-iotests/001.out'
diff: Try `diff --help' for more information.

Many of the uses of 'realpath' in the check script were being used on the output of 'type -p' - but that is already an absolute file name. While a canonical name can often be shorter (realpath gets rid of /../), it can also be longer (due to symlink expansion); and we really don't care if the name is canonical, merely that it was an executable file with an absolute path. These were broken in commit cceaf1db.

The remaining use of realpath was to convert a possibly relative filename into an absolute one before calling diff to make it easier to copy-and-paste the filename for moving the .bad file into place as the new reference file even when running iotests out-of-tree (see commit 93e53fb6), but $PWD can achieve the same purpose.

---
v2: Don't revert 93e53fb6, add commit id mentions in commit message, retitle

---
 tests/qemu-iotests/check | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
tests/qemu-iotests/check +6 -6
index 469142cd586..ec8033350d1 100755
@@ -92,7 +92,7 @@ set_prog_path()
 {
     p=`command -v $1 2> /dev/null`
     if [ -n "$p" -a -x "$p" ]; then
-        realpath -- "$(type -p "$p")"
+        type -p "$p"
     else
         return 1
     fi
@@ -554,7 +554,7 @@ then
         [ "$QEMU_PROG" = "" ] && _init_error "qemu not found"
     fi
 fi
-export QEMU_PROG=$(realpath -- "$(type -p "$QEMU_PROG")")
+export QEMU_PROG="$(type -p "$QEMU_PROG")"
 
 if [ -z "$QEMU_IMG_PROG" ]; then
     if [ -x "$build_iotests/qemu-img" ]; then
@@ -565,7 +565,7 @@ if [ -z "$QEMU_IMG_PROG" ]; then
         _init_error "qemu-img not found"
     fi
 fi
-export QEMU_IMG_PROG=$(realpath -- "$(type -p "$QEMU_IMG_PROG")")
+export QEMU_IMG_PROG="$(type -p "$QEMU_IMG_PROG")"
 
 if [ -z "$QEMU_IO_PROG" ]; then
     if [ -x "$build_iotests/qemu-io" ]; then
@@ -576,7 +576,7 @@ if [ -z "$QEMU_IO_PROG" ]; then
         _init_error "qemu-io not found"
     fi
 fi
-export QEMU_IO_PROG=$(realpath -- "$(type -p "$QEMU_IO_PROG")")
+export QEMU_IO_PROG="$(type -p "$QEMU_IO_PROG")"
 
 if [ -z $QEMU_NBD_PROG ]; then
     if [ -x "$build_iotests/qemu-nbd" ]; then
@@ -587,7 +587,7 @@ if [ -z $QEMU_NBD_PROG ]; then
         _init_error "qemu-nbd not found"
     fi
 fi
-export QEMU_NBD_PROG=$(realpath -- "$(type -p "$QEMU_NBD_PROG")")
+export QEMU_NBD_PROG="$(type -p "$QEMU_NBD_PROG")"
 
 if [ -z "$QEMU_VXHS_PROG" ]; then
   export QEMU_VXHS_PROG="`set_prog_path qnio_server`"
@@ -811,7 +811,7 @@ do
                 else
                     echo " - output mismatch (see $seq.out.bad)"
                     mv $tmp.out $seq.out.bad
-                    $diff -w "$reference" $(realpath $seq.out.bad)
+                    $diff -w "$reference" "$PWD"/$seq.out.bad
                     err=true
                 fi
             fi
Signature · 1 line
2.14.3
Reviewed-by on v2 1/1
#3 lore raw
In reply to Eric Blake
Quoted 16 lines · Eric Blake

CentOS 6 lacks a realpath binary on the base install, which makes all iotests runs fail since the 2.11 release:

001 - output mismatch (see 001.out.bad)
./check: line 815: realpath: command not found
diff: missing operand after `/home/dummy/qemu/tests/qemu-iotests/001.out'
diff: Try `diff --help' for more information.

Many of the uses of 'realpath' in the check script were being used on the output of 'type -p' - but that is already an absolute file name. While a canonical name can often be shorter (realpath gets rid of /../), it can also be longer (due to symlink expansion); and we really don't care if the name is canonical, merely that it was an executable file with an absolute path. These were broken in commit cceaf1db.

Quoted 8 lines

The remaining use of realpath was to convert a possibly relative filename into an absolute one before calling diff to make it easier to copy-and-paste the filename for moving the .bad file into place as the new reference file even when running iotests out-of-tree (see commit 93e53fb6), but $PWD can achieve the same purpose.

TIL type -p :)

Quoted 67 lines

---
v2: Don't revert 93e53fb6, add commit id mentions in commit message, retitle

---
 tests/qemu-iotests/check | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
tests/qemu-iotests/check +6 -6
index 469142cd586..ec8033350d1 100755
@@ -92,7 +92,7 @@ set_prog_path()
 {
     p=`command -v $1 2> /dev/null`
     if [ -n "$p" -a -x "$p" ]; then
-        realpath -- "$(type -p "$p")"
+        type -p "$p"
     else
         return 1
     fi
@@ -554,7 +554,7 @@ then
         [ "$QEMU_PROG" = "" ] && _init_error "qemu not found"
     fi
 fi
-export QEMU_PROG=$(realpath -- "$(type -p "$QEMU_PROG")")
+export QEMU_PROG="$(type -p "$QEMU_PROG")"
 
 if [ -z "$QEMU_IMG_PROG" ]; then
     if [ -x "$build_iotests/qemu-img" ]; then
@@ -565,7 +565,7 @@ if [ -z "$QEMU_IMG_PROG" ]; then
         _init_error "qemu-img not found"
     fi
 fi
-export QEMU_IMG_PROG=$(realpath -- "$(type -p "$QEMU_IMG_PROG")")
+export QEMU_IMG_PROG="$(type -p "$QEMU_IMG_PROG")"
 
 if [ -z "$QEMU_IO_PROG" ]; then
     if [ -x "$build_iotests/qemu-io" ]; then
@@ -576,7 +576,7 @@ if [ -z "$QEMU_IO_PROG" ]; then
         _init_error "qemu-io not found"
     fi
 fi
-export QEMU_IO_PROG=$(realpath -- "$(type -p "$QEMU_IO_PROG")")
+export QEMU_IO_PROG="$(type -p "$QEMU_IO_PROG")"
 
 if [ -z $QEMU_NBD_PROG ]; then
     if [ -x "$build_iotests/qemu-nbd" ]; then
@@ -587,7 +587,7 @@ if [ -z $QEMU_NBD_PROG ]; then
         _init_error "qemu-nbd not found"
     fi
 fi
-export QEMU_NBD_PROG=$(realpath -- "$(type -p "$QEMU_NBD_PROG")")
+export QEMU_NBD_PROG="$(type -p "$QEMU_NBD_PROG")"
 
 if [ -z "$QEMU_VXHS_PROG" ]; then
   export QEMU_VXHS_PROG="`set_prog_path qnio_server`"
@@ -811,7 +811,7 @@ do
                 else
                     echo " - output mismatch (see $seq.out.bad)"
                     mv $tmp.out $seq.out.bad
-                    $diff -w "$reference" $(realpath $seq.out.bad)
+                    $diff -w "$reference" "$PWD"/$seq.out.bad
                     err=true
                 fi
             fi
Applied
#4 lore raw
In reply to Eric Blake

Am 15.03.2018 um 12:51 hat Eric Blake geschrieben:

Quoted 16 lines

CentOS 6 lacks a realpath binary on the base install, which makes all iotests runs fail since the 2.11 release:

001 - output mismatch (see 001.out.bad)
./check: line 815: realpath: command not found
diff: missing operand after `/home/dummy/qemu/tests/qemu-iotests/001.out'
diff: Try `diff --help' for more information.

Many of the uses of 'realpath' in the check script were being used on the output of 'type -p' - but that is already an absolute file name. While a canonical name can often be shorter (realpath gets rid of /../), it can also be longer (due to symlink expansion); and we really don't care if the name is canonical, merely that it was an executable file with an absolute path. These were broken in commit cceaf1db.

Quoted 8 lines

The remaining use of realpath was to convert a possibly relative filename into an absolute one before calling diff to make it easier to copy-and-paste the filename for moving the .bad file into place as the new reference file even when running iotests out-of-tree (see commit 93e53fb6), but $PWD can achieve the same purpose.

Thanks, applied to the block branch.

Kevin