ARM: dts: aspeed: Add Portwell Neptune machine

Initial introduction of Portwell Neptune family equipped with Aspeed 2500 BMC SoC. Neptune is a x86 server development kit with a ASPEED ast2500 BMC manufactured by Portwell. Specifically, This adds the neptune platform device tree file including the flash layout used by the neptune machines.

Signed-off-by Amithash Prasad <[email protected]>

---
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 arch/arm/boot/dts/Makefile                         |   3 +-
 arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts  | 159 +++++++++++++++++++++
 3 files changed, 162 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts

(quoted diff) renamed from Documentation/devicetree/bindings/vendor-prefixes.txt +0 -0

Documentation/devicetree/bindings/vendor-prefixes.txt index daf465be..ad3406d 100644

Documentation/devicetree/bindings/vendor-prefixes.txt +1 -0

@@ -255,6 +255,7 @@ pine64	Pine64
 pixcir  PIXCIR MICROELECTRONICS Co., Ltd
 plathome	Plat'Home Co., Ltd.
 plda	PLDA
+portwell	Portwell Inc.
 poslab	Poslab Technology Co., Ltd.
 powervr	PowerVR (deprecated, use img)
 pulsedlight	PulsedLight, Inc

arch/arm/boot/dts/Makefile +2 -1

index 5cfee25..4746060 100644
@@ -1061,7 +1061,8 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-opp-romulus.dtb \
 	aspeed-bmc-opp-witherspoon.dtb \
 	aspeed-bmc-opp-zaius.dtb \
-	aspeed-bmc-quanta-q71l.dtb
+	aspeed-bmc-quanta-q71l.dtb \
+	aspeed-bmc-portwell-neptune.dtb
 endif
 
 dtstree		:= $(srctree)/$(src)

arch/ renamed from arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts +0 -0

arm/boot/dts/aspeed-bmc-portwell-neptune.dts
new file mode 100644
index 0000000..43ed139

arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts new file +159 -0

@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Portwell Neptune BMC";
+	compatible = "portwell,neptune-bmc", "aspeed,ast2500";
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		postcode0 {
+			label="BMC_UP";
+			gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		postcode1 {
+			label="BMC_HB";
+			gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+		postcode2 {
+			label="FAULT";
+			gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		};
+		// postcode3-7 are GPIOH3-H7
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart1 {
+	// Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default
+		     &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default>;
+	use-ncsi;
+};
+
+&i2c1 {
+	status = "okay";
+	// To PCIe slot SMBUS
+};
+
+&i2c2 {
+	status = "okay";
+	// To LAN I210
+};
+
+&i2c3 {
+	status = "okay";
+	// SMBus to COMe AB
+};
+
+&i2c4 {
+	status = "okay";
+	// I2C to COMe AB
+};
+
+&i2c5 {
+	status = "okay";
+// 	USB Debug card
+	pca9555@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+	};
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+};

Signature · 1 line

2.9.5

Quoted 7 lines · Amithash Prasad

Initial introduction of Portwell Neptune family equipped with Aspeed 2500 BMC SoC. Neptune is a x86 server development kit with a ASPEED ast2500 BMC manufactured by Portwell. Specifically, This adds the neptune platform device tree file including the flash layout used by the neptune machines.

Signed-off-by Amithash Prasad <[email protected]>

Acked-by Andrew Jeffery <[email protected]>