drm/arm/malidp: Enhance support for system and runtime power management on malidp.
Subsystems (3)
cover drm/arm/malidp: Enhance support for system and runtime power management on malidp.
This patch series enhances and fixes certain issues relevant to system and runtime power management on malidp.
Ayan Kumar Halder (8):
drm/arm/malidp: Modified the prototype of malidp_de_irq_fini drm/arm/malidp: Modified the prototype of malidp_se_irq_fini drm/arm/malidp: Split malidp_de_irq_init drm/arm/malidp: Split malidp_se_irq_init drm/arm/malidp: Enable/disable interrupts in runtime pm drm/arm/malidp: Enable/disable the scaling engine interrupts with
memory writeback
drm/arm/malidp: Set the output_depth register in modeset drm/arm/malidp: Added the late system pm functions
drivers/gpu/drm/arm/malidp_drv.c | 33 ++++++++++++++++++++---- drivers/gpu/drm/arm/malidp_hw.c | 55 +++++++++++++++++++++++++++------------- drivers/gpu/drm/arm/malidp_hw.h | 6 +++-- 3 files changed, 70 insertions(+), 24 deletions(-)
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 1/8 drm/arm/malidp: Modified the prototype of malidp_de_irq_fini
'struct drm_device' is being replaced with 'struct malidp_hw_device' as the function argument. The reason being the dependency of malidp_de_irq_fini on 'struct drm_device' needs to be removed so as to enable it to call from functions which receives 'struct malidp_hw_device' as argument. Furthermore, there is no way to retrieve 'struct drm_device' from 'struct malidp_hw_device'.
--- drivers/gpu/drm/arm/malidp_drv.c | 9 ++++++--- drivers/gpu/drm/arm/malidp_hw.c | 5 +---- drivers/gpu/drm/arm/malidp_hw.h | 2 +- 3 files changed, 8 insertions(+), 8 deletions(-)
drivers/gpu/drm/arm/malidp_drv.c +6 -3
@@ -295,6 +295,8 @@ static int malidp_irq_init(struct platform_device *pdev) {int irq_de, irq_se, ret =0 ;struct drm_device *drm =dev_get_drvdata (&pdev->dev); +struct malidp_drm *malidp = drm->dev_private; +struct malidp_hw_device *hwdev = malidp->dev;/* fetch the interrupts from DT */ irq_de =platform_get_irq_byname (pdev,"DE" );
@@ -314,7 +316,7 @@ static int malidp_irq_init(struct platform_device *pdev) ret =malidp_se_irq_init (drm, irq_se);if (ret) { -malidp_de_irq_fini (drm); +malidp_de_irq_fini (hwdev);return ret; }
@@ -652,7 +654,7 @@ static int malidp_bind(struct device *dev)pm_runtime_get_sync (dev); vblank_fail:malidp_se_irq_fini (drm); -malidp_de_irq_fini (drm); +malidp_de_irq_fini (hwdev); drm->irq_enabled = false; irq_init_fail:component_unbind_all (dev, drm);
@@ -681,6 +683,7 @@ static void malidp_unbind(struct device *dev) {struct drm_device *drm =dev_get_drvdata (dev);struct malidp_drm *malidp = drm->dev_private; +struct malidp_hw_device *hwdev = malidp->dev;drm_dev_unregister (drm);drm_fb_cma_fbdev_fini (drm);
@@ -688,7 +691,7 @@ static void malidp_unbind(struct device *dev)pm_runtime_get_sync (dev);drm_crtc_vblank_off (&malidp->crtc);malidp_se_irq_fini (drm); -malidp_de_irq_fini (drm); +malidp_de_irq_fini (hwdev); drm->irq_enabled = false;component_unbind_all (dev, drm);of_node_put (malidp->crtc.port);
drivers/gpu/drm/arm/malidp_hw.c +1 -4
@@ -900,11 +900,8 @@ int malidp_de_irq_init(struct drm_device *drm, int irq)return 0 ; } -void malidp_de_irq_fini (struct drm_device *drm) +void malidp_de_irq_fini (struct malidp_hw_device *hwdev) { -struct malidp_drm *malidp = drm->dev_private; -struct malidp_hw_device *hwdev = malidp->dev; -malidp_hw_disable_irq (hwdev,MALIDP_DE_BLOCK , hwdev->hw->map.de_irq_map.irq_mask); malidp_hw_disable_irq(hwdev, MALIDP_DC_BLOCK,
drivers/gpu/drm/arm/malidp_hw.h +1 -1
@@ -297,7 +297,7 @@ static inline void malidp_hw_enable_irq(struct malidp_hw_device *hwdev, }int malidp_de_irq_init (struct drm_device *drm,int irq); -void malidp_de_irq_fini (struct drm_device *drm); +void malidp_de_irq_fini (struct malidp_hw_device *hwdev);int malidp_se_irq_init (struct drm_device *drm,int irq);void malidp_se_irq_fini (struct drm_device *drm);
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 2/8 drm/arm/malidp: Modified the prototype of malidp_se_irq_fini
In reply to Ayan Kumar Halder'struct drm_device' is being replaced with 'struct malidp_hw_device' as the function argument.The reason being the dependency of malidp_se_irq_fini on 'struct drm_device' needs to be removed so as to enable it to call from functions which receives 'struct malidp_hw_device' as argument. Furthermore, there is no way to retrieve 'struct drm_device' from 'struct malidp_hw_device'
--- drivers/gpu/drm/arm/malidp_drv.c | 4 ++-- drivers/gpu/drm/arm/malidp_hw.c | 5 +---- drivers/gpu/drm/arm/malidp_hw.h | 2 +- 3 files changed, 4 insertions(+), 7 deletions(-)
drivers/gpu/drm/arm/malidp_drv.c +2 -2
@@ -653,7 +653,7 @@ static int malidp_bind(struct device *dev) fbdev_fail:pm_runtime_get_sync (dev); vblank_fail: -malidp_se_irq_fini (drm); +malidp_se_irq_fini (hwdev);malidp_de_irq_fini (hwdev); drm->irq_enabled = false; irq_init_fail:
@@ -690,7 +690,7 @@ static void malidp_unbind(struct device *dev)drm_kms_helper_poll_fini (drm);pm_runtime_get_sync (dev);drm_crtc_vblank_off (&malidp->crtc); -malidp_se_irq_fini (drm); +malidp_se_irq_fini (hwdev);malidp_de_irq_fini (hwdev); drm->irq_enabled = false;component_unbind_all (dev, drm);
drivers/gpu/drm/arm/malidp_hw.c +1 -4
@@ -970,11 +970,8 @@ int malidp_se_irq_init(struct drm_device *drm, int irq)return 0 ; } -void malidp_se_irq_fini (struct drm_device *drm) +void malidp_se_irq_fini (struct malidp_hw_device *hwdev) { -struct malidp_drm *malidp = drm->dev_private; -struct malidp_hw_device *hwdev = malidp->dev; -malidp_hw_disable_irq (hwdev,MALIDP_SE_BLOCK , hwdev->hw->map.se_irq_map.irq_mask); }
drivers/gpu/drm/arm/malidp_hw.h +1 -1
@@ -299,7 +299,7 @@ static inline void malidp_hw_enable_irq(struct malidp_hw_device *hwdev,int malidp_de_irq_init (struct drm_device *drm,int irq);void malidp_de_irq_fini (struct malidp_hw_device *hwdev);int malidp_se_irq_init (struct drm_device *drm,int irq); -void malidp_se_irq_fini (struct drm_device *drm); +void malidp_se_irq_fini (struct malidp_hw_device *hwdev);u8 malidp_hw_get_format_id (const struct malidp_hw_regmap *map,u8 layer_id,u32 format);
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 3/8 drm/arm/malidp: Split malidp_de_irq_init
In reply to Ayan Kumar HalderExtract the hardware initialisation part from malidp_de_irq_init() into the malidp_de_irq_hw_init() which will be later invoked from runtime_pm_resume function when it needs to re-enable the interrupts.
--- drivers/gpu/drm/arm/malidp_hw.c | 25 ++++++++++++++++++------- drivers/gpu/drm/arm/malidp_hw.h | 1 + 2 files changed, 19 insertions(+), 7 deletions(-)
drivers/gpu/drm/arm/malidp_hw.c +18 -7
@@ -869,6 +869,23 @@ static irqreturn_t malidp_de_irq_thread_handler(int irq, void *arg)return IRQ_HANDLED ; } +void malidp_de_irq_hw_init (struct malidp_hw_device *hwdev) +{ +/* ensure interrupts are disabled */ +malidp_hw_disable_irq (hwdev,MALIDP_DE_BLOCK ,0xffffffff ); +malidp_hw_clear_irq (hwdev,MALIDP_DE_BLOCK ,0xffffffff ); +malidp_hw_disable_irq (hwdev,MALIDP_DC_BLOCK ,0xffffffff ); +malidp_hw_clear_irq (hwdev,MALIDP_DC_BLOCK ,0xffffffff ); + +/* first enable the DC block IRQs */ +malidp_hw_enable_irq (hwdev,MALIDP_DC_BLOCK , + hwdev->hw->map.dc_irq_map.irq_mask); + +/* now enable the DE block IRQs */ +malidp_hw_enable_irq (hwdev,MALIDP_DE_BLOCK , + hwdev->hw->map.de_irq_map.irq_mask); +} +int malidp_de_irq_init (struct drm_device *drm,int irq) {struct malidp_drm *malidp = drm->dev_private;
@@ -889,13 +906,7 @@ int malidp_de_irq_init(struct drm_device *drm, int irq)return ret; } -/* first enable the DC block IRQs */ -malidp_hw_enable_irq (hwdev,MALIDP_DC_BLOCK , - hwdev->hw->map.dc_irq_map.irq_mask); - -/* now enable the DE block IRQs */ -malidp_hw_enable_irq (hwdev,MALIDP_DE_BLOCK , - hwdev->hw->map.de_irq_map.irq_mask); +malidp_de_irq_hw_init (hwdev);return 0 ; }
drivers/gpu/drm/arm/malidp_hw.h +1 -0
@@ -297,6 +297,7 @@ static inline void malidp_hw_enable_irq(struct malidp_hw_device *hwdev, }int malidp_de_irq_init (struct drm_device *drm,int irq); +void malidp_de_irq_hw_init (struct malidp_hw_device *hwdev);void malidp_de_irq_fini (struct malidp_hw_device *hwdev);int malidp_se_irq_init (struct drm_device *drm,int irq);void malidp_se_irq_fini (struct malidp_hw_device *hwdev);
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 4/8 drm/arm/malidp: Split malidp_se_irq_init
In reply to Ayan Kumar HalderExtract the hardware initialisation part from malidp_se_irq_init() into the malidp_se_irq_hw_init() which will be later invoked from malidpxxx_enable_memwrite() when it needs to re-enable the interrupts.
--- drivers/gpu/drm/arm/malidp_hw.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)
drivers/gpu/drm/arm/malidp_hw.c +12 -2
@@ -163,6 +163,7 @@ static const u16 dp500_se_scaling_coeffs[][SE_N_SCALING_COEFFS] = { };#define MALIDP_DE_DEFAULT_PREFETCH_START 5 +static void malidp_se_irq_hw_init (struct malidp_hw_device *hwdev);static int malidp500_query_hw (struct malidp_hw_device *hwdev) {
@@ -952,6 +953,16 @@ static irqreturn_t malidp_se_irq(int irq, void *arg)return IRQ_HANDLED ; } +static void malidp_se_irq_hw_init (struct malidp_hw_device *hwdev) +{ +/* ensure interrupts are disabled */ +malidp_hw_disable_irq (hwdev,MALIDP_SE_BLOCK ,0xffffffff ); +malidp_hw_clear_irq (hwdev,MALIDP_SE_BLOCK ,0xffffffff ); + +malidp_hw_enable_irq (hwdev,MALIDP_SE_BLOCK , + hwdev->hw->map.se_irq_map.irq_mask); +} +static irqreturn_t malidp_se_irq_thread_handler (int irq,void *arg) {return IRQ_HANDLED ;
@@ -975,8 +986,7 @@ int malidp_se_irq_init(struct drm_device *drm, int irq)return ret; } -malidp_hw_enable_irq (hwdev,MALIDP_SE_BLOCK , - hwdev->hw->map.se_irq_map.irq_mask); +malidp_se_irq_hw_init (hwdev);return 0 ; }
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 5/8 drm/arm/malidp: Enable/disable interrupts in runtime pm
In reply to Ayan Kumar HalderDisplay engine and core interrupts need to be disabled when the system invokes malidp_runtime_pm_suspend. Consequently, they need to be enabled in malidp_runtime_pm_resume.
--- drivers/gpu/drm/arm/malidp_drv.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/arm/malidp_drv.c +2 -0
@@ -470,6 +470,7 @@ static int malidp_runtime_pm_suspend(struct device *dev)/* we can only suspend if the hardware is in config mode */ WARN_ON (!hwdev->hw->in_config_mode (hwdev)); +malidp_de_irq_fini (hwdev); hwdev->pm_suspended = true;clk_disable_unprepare (hwdev->mclk);clk_disable_unprepare (hwdev->aclk);
@@ -488,6 +489,7 @@ static int malidp_runtime_pm_resume(struct device *dev)clk_prepare_enable (hwdev->aclk);clk_prepare_enable (hwdev->mclk); hwdev->pm_suspended = false; +malidp_de_irq_hw_init (hwdev);return 0 ; }
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 6/8 drm/arm/malidp: Enable/disable the scaling engine interrupts with memory writeback
In reply to Ayan Kumar HalderScaling engine interrupts need to be enabled/disabled as and when memwrite is enabled and disabled. The reason being scaling engine interrupts are used only by the memory writeout layer.
This patch depends on:
"[Patch v5,1/3] drm: mali-dp: Add support for writeback on DP550/DP650"
--- drivers/gpu/drm/arm/malidp_hw.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/arm/malidp_hw.c +2 -0
@@ -621,12 +621,14 @@ static int malidp550_enable_memwrite(struct malidp_hw_device *hwdev,malidp_hw_setbits (hwdev,MALIDP550_SE_MEMWRITE_ONESHOT |MALIDP_SE_MEMWRITE_EN ,MALIDP550_SE_CONTROL ); +malidp_se_irq_hw_init (hwdev);return 0 ; }static void malidp550_disable_memwrite (struct malidp_hw_device *hwdev) {u32 base =malidp_get_block_base (hwdev,MALIDP_DE_BLOCK ); +malidp_se_irq_fini (hwdev);malidp_hw_clearbits (hwdev,MALIDP550_SE_MEMWRITE_ONESHOT |MALIDP_SE_MEMWRITE_EN ,MALIDP550_SE_CONTROL );malidp_hw_clearbits (hwdev,MALIDP_SCALE_ENGINE_EN , base +MALIDP_DE_DISPLAY_FUNC );
Signature · 1 line
2.7.4
PATCH 7/8 drm/arm/malidp: Set the output_depth register in modeset
In reply to Ayan Kumar HalderOne needs to store the value of the OUTPUT_DEPTH that one has parsed from device tree, so that it can be restored on system resume. This value is set in the modeset function as this gets reset when the system suspends.
--- drivers/gpu/drm/arm/malidp_drv.c | 1 + drivers/gpu/drm/arm/malidp_hw.c | 4 ++++ drivers/gpu/drm/arm/malidp_hw.h | 1 + 3 files changed, 6 insertions(+)
drivers/gpu/drm/arm/malidp_drv.c +1 -0
@@ -601,6 +601,7 @@ static int malidp_bind(struct device *dev)for (i =0 ; i <MAX_OUTPUT_CHANNELS ; i++) out_depth = (out_depth <<8 ) | (output_width[i] &0xf );malidp_hw_write (hwdev, out_depth, hwdev->hw->map.out_depth_base); + hwdev->output_color_depth = out_depth;atomic_set (&malidp->config_valid,0 );init_waitqueue_head (&malidp->wq);
drivers/gpu/drm/arm/malidp_hw.c +4 -0
@@ -234,6 +234,8 @@ static void malidp500_modeset(struct malidp_hw_device *hwdev, struct videomode * {u32 val =0 ; +malidp_hw_write (hwdev, hwdev->output_color_depth, + hwdev->hw->map.out_depth_base);malidp_hw_clearbits (hwdev,MALIDP500_DC_CLEAR_MASK ,MALIDP500_DC_CONTROL );if (mode->flags &DISPLAY_FLAGS_HSYNC_HIGH ) val |=MALIDP500_HSYNCPOL ;
@@ -458,6 +460,8 @@ static void malidp550_modeset(struct malidp_hw_device *hwdev, struct videomode * {u32 val =MALIDP_DE_DEFAULT_PREFETCH_START ; +malidp_hw_write (hwdev, hwdev->output_color_depth, + hwdev->hw->map.out_depth_base);malidp_hw_write (hwdev, val,MALIDP550_DE_CONTROL );/* * Mali-DP550 and Mali-DP650 encode the background color like this:
drivers/gpu/drm/arm/malidp_hw.h +1 -0
@@ -228,6 +228,7 @@ struct malidp_hw_device {u8 min_line_size;u16 max_line_size; +u32 output_color_depth;/* track the device PM state */ bool pm_suspended;
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 8/8 drm/arm/malidp: Added the late system pm functions
In reply to Ayan Kumar Haldermalidp_pm_suspend_late checks if the runtime status is not suspended and if so, invokes malidp_runtime_pm_suspend which disables the display engine/core interrupts and the clocks. It sets the runtime status as suspended. Subsequently, malidp_pm_resume_early will invoke malidp_runtime_pm_resume which enables the clocks and the interrupts (previously disabled) and sets the runtime status as active.
--- drivers/gpu/drm/arm/malidp_drv.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
drivers/gpu/drm/arm/malidp_drv.c +17 -0
@@ -766,8 +766,25 @@ static int __maybe_unused malidp_pm_resume(struct device *dev)return 0 ; } +static int __maybe_unused malidp_pm_suspend_late (struct device *dev) +{ +if (!pm_runtime_status_suspended (dev)) { +malidp_runtime_pm_suspend (dev); +pm_runtime_set_suspended (dev); + } +return 0 ; +} + +static int __maybe_unused malidp_pm_resume_early (struct device *dev) +{ +malidp_runtime_pm_resume (dev); +pm_runtime_set_active (dev); +return 0 ; +} +static const struct dev_pm_ops malidp_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(malidp_pm_suspend, malidp_pm_resume) \ + SET_LATE_SYSTEM_SLEEP_PM_OPS(malidp_pm_suspend_late, malidp_pm_resume_early) \SET_RUNTIME_PM_OPS (malidp_runtime_pm_suspend, malidp_runtime_pm_resume,NULL ) };
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 8/8] drm/arm/malidp: Added the late system pm functions
Quoted 9 lines · Ayan Kumar Halder
malidp_pm_suspend_latechecks if the runtime status is not suspended and if so, invokesmalidp_runtime_pm_suspendwhich disables the display engine/core interrupts and the clocks. It sets the runtime status as suspended. Subsequently,malidp_pm_resume_earlywill invokemalidp_runtime_pm_resumewhich enables the clocks and the interrupts (previously disabled) and sets the runtime status as active.Signed-off-by Ayan Kumar Halder <[email protected]>Change-Id I5f8c3d28f076314a1c9da2a46760a9c37039ccda
Why exactly do you need late/early hooks? If you have dependencies with other devices, pls consider adding device_links instead. This here shouldn't be necessary.
-Daniel
Quoted 41 lines
--- drivers/gpu/drm/arm/malidp_drv.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)drivers/gpu/drm/arm/malidp_drv.c +17
-0@@ -766,8 +766,25 @@ static int __maybe_unused malidp_pm_resume(struct device *dev)return 0 ; } +static int __maybe_unused malidp_pm_suspend_late (struct device *dev) +{ +if (!pm_runtime_status_suspended (dev)) { +malidp_runtime_pm_suspend (dev); +pm_runtime_set_suspended (dev); + } +return 0 ; +} + +static int __maybe_unused malidp_pm_resume_early (struct device *dev) +{ +malidp_runtime_pm_resume (dev); +pm_runtime_set_active (dev); +return 0 ; +} +static const struct dev_pm_ops malidp_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(malidp_pm_suspend, malidp_pm_resume) \ + SET_LATE_SYSTEM_SLEEP_PM_OPS(malidp_pm_suspend_late, malidp_pm_resume_early) \SET_RUNTIME_PM_OPS (malidp_runtime_pm_suspend, malidp_runtime_pm_resume,NULL ) };Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 8/8] drm/arm/malidp: Added the late system pm functions
Quoted 8 lines · Daniel Vetter
Quoted 7 lines · Ayan Kumar Halder
malidp_pm_suspend_latechecks if the runtime status is not suspended and if so, invokesmalidp_runtime_pm_suspendwhich disables the display engine/core interrupts and the clocks. It sets the runtime status as suspended. Subsequently,malidp_pm_resume_earlywill invokemalidp_runtime_pm_resumewhich enables the clocks and the interrupts (previously disabled) and sets the runtime status as active.
Quoted 7 lines
Quoted 2 lines
Signed-off-by Ayan Kumar Halder <[email protected]>Change-Id I5f8c3d28f076314a1c9da2a46760a9c37039ccdaWhy exactly do you need late/early hooks? If you have dependencies with other devices, pls consider adding
device_linksinstead. This here shouldn't be necessary.
-Daniel
We need to late/early hooks to disable malidp interrupts and the clocks.
Quoted 37 lines
Quoted 37 lines
--- drivers/gpu/drm/arm/malidp_drv.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)drivers/gpu/drm/arm/malidp_drv.c +17
-1@@ -766,8 +766,25 @@ static int __maybe_unused malidp_pm_resume(struct device *dev)return 0 ; } +static int __maybe_unused malidp_pm_suspend_late (struct device *dev) +{ +if (!pm_runtime_status_suspended (dev)) { +malidp_runtime_pm_suspend (dev); +pm_runtime_set_suspended (dev); + } +return 0 ; +} + +static int __maybe_unused malidp_pm_resume_early (struct device *dev) +{ +malidp_runtime_pm_resume (dev); +pm_runtime_set_active (dev); +return 0 ; +} +static const struct dev_pm_ops malidp_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(malidp_pm_suspend, malidp_pm_resume) \ + SET_LATE_SYSTEM_SLEEP_PM_OPS(malidp_pm_suspend_late, malidp_pm_resume_early) \SET_RUNTIME_PM_OPS (malidp_runtime_pm_suspend, malidp_runtime_pm_resume,NULL ) }; --2.7.4
Quoted 13 lines
Quoted 4 lines
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 8/8] drm/arm/malidp: Added the late system pm functions
Quoted 12 lines · Ayan Halder
Quoted 11 lines · Daniel Vetter
Quoted 9 lines · Ayan Kumar Halder
malidp_pm_suspend_latechecks if the runtime status is not suspended and if so, invokesmalidp_runtime_pm_suspendwhich disables the display engine/core interrupts and the clocks. It sets the runtime status as suspended. Subsequently,malidp_pm_resume_earlywill invokemalidp_runtime_pm_resumewhich enables the clocks and the interrupts (previously disabled) and sets the runtime status as active.Signed-off-by Ayan Kumar Halder <[email protected]>Change-Id I5f8c3d28f076314a1c9da2a46760a9c37039ccda
Quoted 6 lines
Quoted 4 lines
Why exactly do you need late/early hooks? If you have dependencies with other devices, pls consider adding
device_linksinstead. This here shouldn't be necessary.
-DanielWe need to late/early hooks to disable malidp interrupts and the clocks.
Yes, but why this ordering constraint? Why can't you just disable the interrupts/clocks in the normal suspend code. I see that the patch does this, I want to understand why it does it.
-Daniel
Quoted 55 lines
Quoted 37 lines
Quoted 37 lines
--- drivers/gpu/drm/arm/malidp_drv.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)drivers/gpu/drm/arm/malidp_drv.c +17
-1@@ -766,8 +766,25 @@ static int __maybe_unused malidp_pm_resume(struct device *dev)return 0 ; } +static int __maybe_unused malidp_pm_suspend_late (struct device *dev) +{ +if (!pm_runtime_status_suspended (dev)) { +malidp_runtime_pm_suspend (dev); +pm_runtime_set_suspended (dev); + } +return 0 ; +} + +static int __maybe_unused malidp_pm_resume_early (struct device *dev) +{ +malidp_runtime_pm_resume (dev); +pm_runtime_set_active (dev); +return 0 ; +} +static const struct dev_pm_ops malidp_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(malidp_pm_suspend, malidp_pm_resume) \ + SET_LATE_SYSTEM_SLEEP_PM_OPS(malidp_pm_suspend_late, malidp_pm_resume_early) \SET_RUNTIME_PM_OPS (malidp_runtime_pm_suspend, malidp_runtime_pm_resume,NULL ) }; --2.7.4
Quoted 13 lines
Quoted 4 lines
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-develIMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Re: [PATCH 8/8] drm/arm/malidp: Added the late system pm functions
Quoted 17 lines · Daniel Vetter
Quoted 16 lines · Ayan Halder
Quoted 15 lines · Daniel Vetter
Quoted 9 lines · Ayan Kumar Halder
malidp_pm_suspend_latechecks if the runtime status is not suspended and if so, invokesmalidp_runtime_pm_suspendwhich disables the display engine/core interrupts and the clocks. It sets the runtime status as suspended. Subsequently,malidp_pm_resume_earlywill invokemalidp_runtime_pm_resumewhich enables the clocks and the interrupts (previously disabled) and sets the runtime status as active.Signed-off-by Ayan Kumar Halder <[email protected]>Change-Id I5f8c3d28f076314a1c9da2a46760a9c37039ccdaWhy exactly do you need late/early hooks? If you have dependencies with other devices, pls consider adding
device_linksinstead. This here shouldn't be necessary.
-Daniel
Quoted 7 lines
Quoted 2 lines
We need to late/early hooks to disable malidp interrupts and the clocks.
Yes, but why this ordering constraint? Why can't you just disable the interrupts/clocks in the normal suspend code. I see that the patch does this, I want to understand why it does it.
-Daniel
Apologies for my delayed response on this.
With reference to https://lwn.net/Articles/505683/ :-
1. "suspend() should leave the device in a quiescent state." We invoke drm_mode_config_helper_suspend() which deactivates the crtc. I understand that this is the quiescent state.
2. "suspend_late() can often be the same as runtime_suspend()." We invoke runtime suspend/resume calls in late/early hooks.
Quoted 50 lines
Quoted 50 lines
Quoted 50 lines
Quoted 37 lines
--- drivers/gpu/drm/arm/malidp_drv.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)drivers/gpu/drm/arm/malidp_drv.c +17
-1@@ -766,8 +766,25 @@ static int __maybe_unused malidp_pm_resume(struct device *dev)return 0 ; } +static int __maybe_unused malidp_pm_suspend_late (struct device *dev) +{ +if (!pm_runtime_status_suspended (dev)) { +malidp_runtime_pm_suspend (dev); +pm_runtime_set_suspended (dev); + } +return 0 ; +} + +static int __maybe_unused malidp_pm_resume_early (struct device *dev) +{ +malidp_runtime_pm_resume (dev); +pm_runtime_set_active (dev); +return 0 ; +} +static const struct dev_pm_ops malidp_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(malidp_pm_suspend, malidp_pm_resume) \ + SET_LATE_SYSTEM_SLEEP_PM_OPS(malidp_pm_suspend_late, malidp_pm_resume_early) \SET_RUNTIME_PM_OPS (malidp_runtime_pm_suspend, malidp_runtime_pm_resume,NULL ) }; --2.7.4
Quoted 4 lines
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 12 lines
Quoted 5 lines
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-develSignature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 8/8] drm/arm/malidp: Added the late system pm functions
Quoted 27 lines · Ayan Halder
Quoted 17 lines · Daniel Vetter
Quoted 16 lines · Ayan Halder
Quoted 15 lines · Daniel Vetter
Quoted 9 lines · Ayan Kumar Halder
malidp_pm_suspend_latechecks if the runtime status is not suspended and if so, invokesmalidp_runtime_pm_suspendwhich disables the display engine/core interrupts and the clocks. It sets the runtime status as suspended. Subsequently,malidp_pm_resume_earlywill invokemalidp_runtime_pm_resumewhich enables the clocks and the interrupts (previously disabled) and sets the runtime status as active.Signed-off-by Ayan Kumar Halder <[email protected]>Change-Id I5f8c3d28f076314a1c9da2a46760a9c37039ccdaWhy exactly do you need late/early hooks? If you have dependencies with other devices, pls consider adding
device_linksinstead. This here shouldn't be necessary.
-DanielQuoted 7 lines
Quoted 2 lines
We need to late/early hooks to disable malidp interrupts and the clocks.
Yes, but why this ordering constraint? Why can't you just disable the interrupts/clocks in the normal suspend code. I see that the patch does this, I want to understand why it does it.
-DanielApologies for my delayed response on this.
Quoted 7 lines
With reference to https://lwn.net/Articles/505683/ :-
1. "suspend()should leave the device in a quiescent state." We invokedrm_mode_config_helper_suspend()which deactivates the crtc. I understand that this is the quiescent state.2. "
suspend_late()can often be the same asruntime_suspend()." We invoke runtime suspend/resume calls in late/early hooks.
This article is from 2012. That's not really recommended best practices anymore. device_links have only been added a few years ago, so ofc an article from 2012 can't tell you that you should use those instead :-)
That's why I brought this up, we have much better ways to handle device dependencies now.
Also, you still haven't explained what exactly the dependency is. -Daniel
Quoted 63 lines
Quoted 63 lines
Quoted 56 lines
Quoted 38 lines
Quoted 38 lines
--- drivers/gpu/drm/arm/malidp_drv.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)drivers/gpu/drm/arm/malidp_drv.c +17
-1@@ -766,8 +766,25 @@ static int __maybe_unused malidp_pm_resume(struct device *dev)return 0 ; } +static int __maybe_unused malidp_pm_suspend_late (struct device *dev) +{ +if (!pm_runtime_status_suspended (dev)) { +malidp_runtime_pm_suspend (dev); +pm_runtime_set_suspended (dev); + } +return 0 ; +} + +static int __maybe_unused malidp_pm_resume_early (struct device *dev) +{ +malidp_runtime_pm_resume (dev); +pm_runtime_set_active (dev); +return 0 ; +} +static const struct dev_pm_ops malidp_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(malidp_pm_suspend, malidp_pm_resume) \ + SET_LATE_SYSTEM_SLEEP_PM_OPS(malidp_pm_suspend_late, malidp_pm_resume_early) \SET_RUNTIME_PM_OPS (malidp_runtime_pm_suspend, malidp_runtime_pm_resume,NULL ) }; --2.7.4
Quoted 13 lines
Quoted 4 lines
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-develIMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-develSignature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 8/8] drm/arm/malidp: Added the late system pm functions
Hi Daniel,
Quoted 36 lines · Daniel Vetter
Quoted 27 lines · Ayan Halder
Quoted 17 lines · Daniel Vetter
Quoted 16 lines · Ayan Halder
Quoted 15 lines · Daniel Vetter
Quoted 9 lines · Ayan Kumar Halder
malidp_pm_suspend_latechecks if the runtime status is not suspended and if so, invokesmalidp_runtime_pm_suspendwhich disables the display engine/core interrupts and the clocks. It sets the runtime status as suspended. Subsequently,malidp_pm_resume_earlywill invokemalidp_runtime_pm_resumewhich enables the clocks and the interrupts (previously disabled) and sets the runtime status as active.Signed-off-by Ayan Kumar Halder <[email protected]>Change-Id I5f8c3d28f076314a1c9da2a46760a9c37039ccdaWhy exactly do you need late/early hooks? If you have dependencies with other devices, pls consider adding
device_linksinstead. This here shouldn't be necessary.
-DanielQuoted 7 lines
Quoted 2 lines
We need to late/early hooks to disable malidp interrupts and the clocks.
Yes, but why this ordering constraint? Why can't you just disable the interrupts/clocks in the normal suspend code. I see that the patch does this, I want to understand why it does it.
-DanielApologies for my delayed response on this.
Quoted 7 lines
With reference to https://lwn.net/Articles/505683/ :-
1. "suspend()should leave the device in a quiescent state." We invokedrm_mode_config_helper_suspend()which deactivates the crtc. I understand that this is the quiescent state.2. "
suspend_late()can often be the same asruntime_suspend()." We invoke runtime suspend/resume calls in late/early hooks.
Quoted 7 lines
This article is from 2012. That's not really recommended best practices anymore.
device_linkshave only been added a few years ago, so ofc an article from 2012 can't tell you that you should use those instead :-)That's why I brought this up, we have much better ways to handle device dependencies now.
We aren't trying to manage any device dependencies here, I don't know where that idea came from?
The kernel-doc on drm-next this afternoon says effectively the same thing:
* @suspend: Executed before putting the system into a sleep state in which the
* contents of main memory are preserved. The exact action to perform * depends on the device's subsystem (PM domain, device type, class or bus * type), but generally the device must be quiescent after subsystem-level * @suspend() has returned, so that it doesn't do any I/O or DMA. * Subsystem-level @suspend() is executed for all devices after invoking * subsystem-level @prepare() for all of them.
(i.e. suspend() makes the device quiescent).
* @suspend_late: Continue operations started by @suspend(). For a number of
* devices @suspend_late() may point to the same callback routine as the
* runtime suspend callback.
(suggests suspend_late() be assigned to the same function as runtime suspend).
As for why, my understanding is like so:
For ->suspend(), we use the DRM helper, which disables the CRTC. Normally disabling the CRTC would be enough to also invoke our pm_runtime callback to do the final clock disable etc., however when a system suspend is in-progress, the core forcibly takes a runtime reference on all devices - preventing any pm_runtime paths from running.
This means that after the CRTC is disabled in ->suspend(), our normal pm_runtime path will not be invoked, and so the things done in malidp_runtime_pm_suspend() will never happen.
We were just following the advice in the kernel-doc to deal with this.
The alternative would be to call malidp_runtime_pm_{suspend,resume} from the "not late" hooks, but I'd ask why?
Quoted 1 line
Also, you still haven't explained what exactly the dependency is.
Because there isn't one :-)
Thanks,
-Brian
Quoted 61 lines
-Daniel
Quoted 59 lines
Quoted 59 lines
Quoted 56 lines
Quoted 38 lines
Quoted 38 lines
--- drivers/gpu/drm/arm/malidp_drv.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)drivers/gpu/drm/arm/malidp_drv.c +17
-1@@ -766,8 +766,25 @@ static int __maybe_unused malidp_pm_resume(struct device *dev)return 0 ; } +static int __maybe_unused malidp_pm_suspend_late (struct device *dev) +{ +if (!pm_runtime_status_suspended (dev)) { +malidp_runtime_pm_suspend (dev); +pm_runtime_set_suspended (dev); + } +return 0 ; +} + +static int __maybe_unused malidp_pm_resume_early (struct device *dev) +{ +malidp_runtime_pm_resume (dev); +pm_runtime_set_active (dev); +return 0 ; +} +static const struct dev_pm_ops malidp_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(malidp_pm_suspend, malidp_pm_resume) \ + SET_LATE_SYSTEM_SLEEP_PM_OPS(malidp_pm_suspend_late, malidp_pm_resume_early) \SET_RUNTIME_PM_OPS (malidp_runtime_pm_suspend, malidp_runtime_pm_resume,NULL ) }; --2.7.4
Quoted 13 lines
Quoted 4 lines
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-develIMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 9 lines
Quoted 4 lines
Quoted 4 lines
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.chSignature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 8/8] drm/arm/malidp: Added the late system pm functions
Quoted 70 lines · Brian Starkey
Hi Daniel,
Quoted 36 lines · Daniel Vetter
Quoted 27 lines · Ayan Halder
Quoted 17 lines · Daniel Vetter
Quoted 16 lines · Ayan Halder
Quoted 15 lines · Daniel Vetter
Quoted 9 lines · Ayan Kumar Halder
malidp_pm_suspend_latechecks if the runtime status is not suspended and if so, invokesmalidp_runtime_pm_suspendwhich disables the display engine/core interrupts and the clocks. It sets the runtime status as suspended. Subsequently,malidp_pm_resume_earlywill invokemalidp_runtime_pm_resumewhich enables the clocks and the interrupts (previously disabled) and sets the runtime status as active.Signed-off-by Ayan Kumar Halder <[email protected]>Change-Id I5f8c3d28f076314a1c9da2a46760a9c37039ccdaWhy exactly do you need late/early hooks? If you have dependencies with other devices, pls consider adding
device_linksinstead. This here shouldn't be necessary.
-DanielQuoted 7 lines
Quoted 2 lines
We need to late/early hooks to disable malidp interrupts and the clocks.
Yes, but why this ordering constraint? Why can't you just disable the interrupts/clocks in the normal suspend code. I see that the patch does this, I want to understand why it does it.
-DanielApologies for my delayed response on this.
Quoted 7 lines
With reference to https://lwn.net/Articles/505683/ :-
1. "suspend()should leave the device in a quiescent state." We invokedrm_mode_config_helper_suspend()which deactivates the crtc. I understand that this is the quiescent state.2. "
suspend_late()can often be the same asruntime_suspend()." We invoke runtime suspend/resume calls in late/early hooks.Quoted 7 lines
This article is from 2012. That's not really recommended best practices anymore.
device_linkshave only been added a few years ago, so ofc an article from 2012 can't tell you that you should use those instead :-)That's why I brought this up, we have much better ways to handle device dependencies now.
We aren't trying to manage any device dependencies here, I don't know where that idea came from?
The kernel-doc on drm-next this afternoon says effectively the same thing:
* @suspend: Executed before putting the system into a sleep state in which the
* contents of main memory are preserved. The exact action to perform * depends on the device's subsystem (PM domain, device type, class or bus * type), but generally the device must be quiescent after subsystem-level * @suspend() has returned, so that it doesn't do any I/O or DMA. * Subsystem-level @suspend() is executed for all devices after invoking * subsystem-level @prepare() for all of them.(i.e.
suspend()makes the device quiescent).* @suspend_late: Continue operations started by @suspend(). For a number of
* devices @suspend_late() may point to the same callback routine as the
* runtime suspend callback.(suggests
suspend_late()be assigned to the same function as runtime suspend).
Quoted 8 lines
As for why, my understanding is like so:
For ->suspend(), we use the DRM helper, which disables the CRTC. Normally disabling the CRTC would be enough to also invoke our
pm_runtimecallback to do the final clock disable etc., however when a system suspend is in-progress, the core forcibly takes a runtime reference on all devices - preventing anypm_runtimepaths from running.
I thought this was fixed. At least I remember we had to add some special calls to i915 to opt out of the "do runtime pm as part of suspend/resume" behaviour, since it doesn't match what we needed.
See
commit aae4518b3124b29f8dc81c829c704fd2df72e98b
Author: Rafael J. Wysocki <[email protected]> Date: Fri May 16 02:46:50 2014 +0200
PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily
So I thought this stuff was supposed to work now. Adding Rafael Wyzocki, he's done plenty presentations recently about exactly this.
Quoted 4 lines
This means that after the CRTC is disabled in ->suspend(), our normal
pm_runtimepath will not be invoked, and so the things done inmalidp_runtime_pm_suspend()will never happen.
Quoted 8 lines
We were just following the advice in the kernel-doc to deal with this.
The alternative would be to call malidp_runtime_pm_{suspend,resume} from the "not late" hooks, but I'd ask why?
Quoted 1 line
Also, you still haven't explained what exactly the dependency is.
Because there isn't one :-)
Hm, if there really isn't one, then I guess it's ok. But it's way too easy to screw this up, have an accidental depency on a different device. And then you try to fix this up. Having a suspend_late hook still smells fishy to me, but I might be out of the loop.
-Daniel
Quoted 74 lines
Thanks,
-BrianQuoted 70 lines
-Daniel
Quoted 63 lines
Quoted 63 lines
Quoted 51 lines
Quoted 38 lines
Quoted 38 lines
--- drivers/gpu/drm/arm/malidp_drv.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)drivers/gpu/drm/arm/malidp_drv.c +17
-1@@ -766,8 +766,25 @@ static int __maybe_unused malidp_pm_resume(struct device *dev)return 0 ; } +static int __maybe_unused malidp_pm_suspend_late (struct device *dev) +{ +if (!pm_runtime_status_suspended (dev)) { +malidp_runtime_pm_suspend (dev); +pm_runtime_set_suspended (dev); + } +return 0 ; +} + +static int __maybe_unused malidp_pm_resume_early (struct device *dev) +{ +malidp_runtime_pm_resume (dev); +pm_runtime_set_active (dev); +return 0 ; +} +static const struct dev_pm_ops malidp_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(malidp_pm_suspend, malidp_pm_resume) \ + SET_LATE_SYSTEM_SLEEP_PM_OPS(malidp_pm_suspend_late, malidp_pm_resume_early) \SET_RUNTIME_PM_OPS (malidp_runtime_pm_suspend, malidp_runtime_pm_resume,NULL ) }; --2.7.4
Quoted 13 lines
Quoted 4 lines
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-develQuoted 5 lines
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.chSignature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 8/8] drm/arm/malidp: Added the late system pm functions
Hi Daniel,
Quoted 7 lines · Daniel Vetter
Quoted 6 lines · Brian Starkey
Hi Daniel,
Quoted 3 lines · Daniel Vetter
Quoted 2 lines · Ayan Halder
Quoted 1 line · Daniel Vetter
On Tue, Mar 27, 2018 at 11:59 AM, Ayan Halder <[email protected]> wrote:
[snip]
Quoted 16 lines
Quoted 9 lines
As for why, my understanding is like so:
For ->suspend(), we use the DRM helper, which disables the CRTC. Normally disabling the CRTC would be enough to also invoke our
pm_runtimecallback to do the final clock disable etc., however when a system suspend is in-progress, the core forcibly takes a runtime reference on all devices - preventing anypm_runtimepaths from running.I thought this was fixed. At least I remember we had to add some special calls to i915 to opt out of the "do runtime pm as part of suspend/resume" behaviour, since it doesn't match what we needed.
See
Quoted 8 lines
commit
aae4518b3124b29f8dc81c829c704fd2df72e98bAuthor: Rafael J. Wysocki <[email protected]> Date: Fri May 16 02:46:50 2014 +0200PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily
So I thought this stuff was supposed to work now. Adding Rafael Wyzocki, he's done plenty presentations recently about exactly this.
AFAIK direct-complete is a different thing - related, but not involved here.
Ayan's patch is to deal with the case where the device is active (runtime state = active), when a system suspend is triggered.
The core takes its reference (leaving direct-complete devices 'suspended' if possible, but our device is 'active' and so direct-complete doesn't apply) and then we start the system suspend and disable the CRTC.
Normally, after the CRTC is disabled, we rely on PM-core to notice we can be runtime suspended, but it won't do this during system suspend because of the reference PM-core took, and so we need to force the suspend ourselves.
Quoted 12 lines
Quoted 12 lines
This means that after the CRTC is disabled in ->suspend(), our normal
pm_runtimepath will not be invoked, and so the things done inmalidp_runtime_pm_suspend()will never happen.We were just following the advice in the kernel-doc to deal with this.
The alternative would be to call malidp_runtime_pm_{suspend,resume} from the "not late" hooks, but I'd ask why?
Quoted 1 line
Also, you still haven't explained what exactly the dependency is.
Quoted 8 lines
Quoted 1 line
Because there isn't one :-)
Hm, if there really isn't one, then I guess it's ok. But it's way too easy to screw this up, have an accidental depency on a different device. And then you try to fix this up. Having a
suspend_latehook still smells fishy to me, but I might be out of the loop.
-Daniel
Hopefully Rafael can set us straight. The kerneldoc doesn't make suspend_late sound exceptional, but kernel-doc isn't perfect :-)
Thanks for the review,
-Brian
Quoted 72 lines
Quoted 72 lines
Thanks,
-BrianQuoted 66 lines
-Daniel
Quoted 63 lines
Quoted 63 lines
Quoted 51 lines
Quoted 38 lines
Quoted 38 lines
--- drivers/gpu/drm/arm/malidp_drv.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)drivers/gpu/drm/arm/malidp_drv.c +17
-1@@ -766,8 +766,25 @@ static int __maybe_unused malidp_pm_resume(struct device *dev)return 0 ; } +static int __maybe_unused malidp_pm_suspend_late (struct device *dev) +{ +if (!pm_runtime_status_suspended (dev)) { +malidp_runtime_pm_suspend (dev); +pm_runtime_set_suspended (dev); + } +return 0 ; +} + +static int __maybe_unused malidp_pm_resume_early (struct device *dev) +{ +malidp_runtime_pm_resume (dev); +pm_runtime_set_active (dev); +return 0 ; +} +static const struct dev_pm_ops malidp_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(malidp_pm_suspend, malidp_pm_resume) \ + SET_LATE_SYSTEM_SLEEP_PM_OPS(malidp_pm_suspend_late, malidp_pm_resume_early) \SET_RUNTIME_PM_OPS (malidp_runtime_pm_suspend, malidp_runtime_pm_resume,NULL ) }; --2.7.4
Quoted 13 lines
Quoted 4 lines
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-develQuoted 5 lines
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
Quoted 9 lines
Quoted 4 lines
Quoted 4 lines
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.chSignature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel