Skip to contentSkip to conversation

Hyper-V netvsc PMD and VMBus support

PATCH Superseded Stephen Hemminger 2 participants 7 messages May 15, 2018 – May 16, 2018

Subsystems (2)

v8 of 12 Superseded Latest is v12 →

lore
Share & tools
lore
#0 lore raw

v8 cover Hyper-V netvsc PMD and VMBus support

This is a revised version of the Hyper-V native bus (VMBus) and network device (netvsc) drivers. This virtual device is used in Microsoft Hyper-V in Windows 10, Windows Server 2016 and Azure. Most of this code was extracted from FreeBSD and some of this is from earlier code donated by Brocade.

Only Linux is supported at present, but the code is split to allow future FreeBSD and Windows support.

This version works with upstream kernel (4.16) but in that mode only a single queue is supported. With additional patches that are pending for 5.0 kernel, multi-queue support works as well.

Device binding is best done via driverctl; this required some additional fixes to kernel and driverctl to work correctly. Linux kernel vmbus support needed to support sysfs driver_override and driverctl needed to handle non-PCI bus from udev.
https://gitlab.com/driverctl/driverctl/merge_requests/3
http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2018-April/118889.html

v8
- targeted for 18.08, move release notes
- use Ted's libuuid (not FreeBSD) because that is 3 clause BSD license versus 2 clause in FreeBSD
- minor checkpatch whitespace fixes

v7
- add EAL UUID functions from BSD to remove dependency on libuuid this means device can be enabled by default and eliminates build issues
- add support for latest NetVSP protocol (from hayaingz)
- add probe finish for compatability with 18.05
- rebase to 18.05-rc3

v6
- rebase to current 18.05-rc2
- fix RSS initialization
- minor documentation fixes

v5
- rebase to current 18.05-rc1
- fix message from vmbus due to race on sysfs for sub channel

v4
- don't enable by default because of uuid library dependency
- api's are internal no need to mark experimental
- add netvsc ini file
- fix MAINTAINERS entry

v3
- fix documentation to format correctly and include more info about binding
- fix build on 32 bit
- minor white space and indentation fixes

Stephen Hemminger (5):
eal: add rte_uuid support
bus/vmbus: add hyper-v virtual bus support net/netvsc: add hyper-v netvsc network device net/netvsc: add documentation
bus/vmbus and net/netvsc: add meson build support

 MAINTAINERS                                   |   11 +
 config/common_base                            |   13 +
 config/common_linuxapp                        |    3 +
 config/meson.build                            |    7 +
 doc/guides/nics/features/netvsc.ini           |   23 +
 doc/guides/nics/index.rst                     |    1 +
 doc/guides/nics/netvsc.rst                    |  103 ++
 doc/guides/rel_notes/release_18_05.rst        |    5 +
 drivers/bus/Makefile                          |    1 +
 drivers/bus/meson.build                       |    2 +-
 drivers/bus/vmbus/Makefile                    |   36 +
 drivers/bus/vmbus/linux/Makefile              |    3 +
 drivers/bus/vmbus/linux/vmbus_bus.c           |  355 +++++
 drivers/bus/vmbus/linux/vmbus_uio.c           |  390 ++++++
 drivers/bus/vmbus/meson.build                 |   16 +
 drivers/bus/vmbus/private.h                   |  132 ++
 drivers/bus/vmbus/rte_bus_vmbus.h             |  396 ++++++
 drivers/bus/vmbus/rte_bus_vmbus_version.map   |   28 +
 drivers/bus/vmbus/rte_vmbus_reg.h             |  344 +++++
 drivers/bus/vmbus/vmbus_bufring.c             |  241 ++++
 drivers/bus/vmbus/vmbus_channel.c             |  406 ++++++
 drivers/bus/vmbus/vmbus_common.c              |  286 ++++
 drivers/bus/vmbus/vmbus_common_uio.c          |  232 ++++
 drivers/net/Makefile                          |    1 +
 drivers/net/meson.build                       |    2 +-
 drivers/net/netvsc/Makefile                   |   23 +
 drivers/net/netvsc/hn_ethdev.c                |  761 ++++++++++
 drivers/net/netvsc/hn_logs.h                  |   35 +
 drivers/net/netvsc/hn_nvs.c                   |  535 ++++++++
 drivers/net/netvsc/hn_nvs.h                   |  245 ++++
 drivers/net/netvsc/hn_rndis.c                 | 1101 +++++++++++++++
 drivers/net/netvsc/hn_rndis.h                 |   26 +
 drivers/net/netvsc/hn_rxtx.c                  | 1221 +++++++++++++++++
 drivers/net/netvsc/hn_var.h                   |  139 ++
 drivers/net/netvsc/meson.build                |   13 +
 drivers/net/netvsc/ndis.h                     |  378 +++++
 drivers/net/netvsc/rndis.h                    |  414 ++++++
 drivers/net/netvsc/rte_pmd_netvsc_version.map |    5 +
 lib/librte_eal/bsdapp/eal/Makefile            |    1 +
 lib/librte_eal/common/Makefile                |    2 +-
 lib/librte_eal/common/eal_common_uuid.c       |  193 +++
 lib/librte_eal/common/include/rte_uuid.h      |  129 ++
 lib/librte_eal/common/meson.build             |    2 +
 lib/librte_eal/linuxapp/eal/Makefile          |    1 +
 mk/rte.app.mk                                 |    2 +
 45 files changed, 8260 insertions(+), 3 deletions(-)
 create mode 100644 doc/guides/nics/features/netvsc.ini
 create mode 100644 doc/guides/nics/netvsc.rst
 create mode 100644 drivers/bus/vmbus/Makefile
 create mode 100644 drivers/bus/vmbus/linux/Makefile
 create mode 100644 drivers/bus/vmbus/linux/vmbus_bus.c
 create mode 100644 drivers/bus/vmbus/linux/vmbus_uio.c
 create mode 100644 drivers/bus/vmbus/meson.build
 create mode 100644 drivers/bus/vmbus/private.h
 create mode 100644 drivers/bus/vmbus/rte_bus_vmbus.h
 create mode 100644 drivers/bus/vmbus/rte_bus_vmbus_version.map
 create mode 100644 drivers/bus/vmbus/rte_vmbus_reg.h
 create mode 100644 drivers/bus/vmbus/vmbus_bufring.c
 create mode 100644 drivers/bus/vmbus/vmbus_channel.c
 create mode 100644 drivers/bus/vmbus/vmbus_common.c
 create mode 100644 drivers/bus/vmbus/vmbus_common_uio.c
 create mode 100644 drivers/net/netvsc/Makefile
 create mode 100644 drivers/net/netvsc/hn_ethdev.c
 create mode 100644 drivers/net/netvsc/hn_logs.h
 create mode 100644 drivers/net/netvsc/hn_nvs.c
 create mode 100644 drivers/net/netvsc/hn_nvs.h
 create mode 100644 drivers/net/netvsc/hn_rndis.c
 create mode 100644 drivers/net/netvsc/hn_rndis.h
 create mode 100644 drivers/net/netvsc/hn_rxtx.c
 create mode 100644 drivers/net/netvsc/hn_var.h
 create mode 100644 drivers/net/netvsc/meson.build
 create mode 100644 drivers/net/netvsc/ndis.h
 create mode 100644 drivers/net/netvsc/rndis.h
 create mode 100644 drivers/net/netvsc/rte_pmd_netvsc_version.map
 create mode 100644 lib/librte_eal/common/eal_common_uuid.c
 create mode 100644 lib/librte_eal/common/include/rte_uuid.h
Signature · 1 line
2.17.0
#1 lore raw

PATCH v8 1/5 eal: add rte_uuid support

Since uuid functions may not be available everywhere, implement uuid functions in DPDK. These are based off the BSD licensed libuuid in util-link.

---
 lib/librte_eal/bsdapp/eal/Makefile       |   1 +
 lib/librte_eal/common/Makefile           |   2 +-
 lib/librte_eal/common/eal_common_uuid.c  | 193 +++++++++++++++++++++++
 lib/librte_eal/common/include/rte_uuid.h | 129 +++++++++++++++
 lib/librte_eal/common/meson.build        |   2 +
 lib/librte_eal/linuxapp/eal/Makefile     |   1 +
 6 files changed, 327 insertions(+), 1 deletion(-)
 create mode 100644 lib/librte_eal/common/eal_common_uuid.c
 create mode 100644 lib/librte_eal/common/include/rte_uuid.h
lib/librte_eal/bsdapp/eal/Makefile +1 -0
index 3fd33f1e4318..13eafca61243 100644
@@ -58,6 +58,7 @@ SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_options.c
 SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_thread.c
 SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_proc.c
 SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_fbarray.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += eal_common_uuid.c
 SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += rte_malloc.c
 SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += malloc_elem.c
 SRCS-$(CONFIG_RTE_EXEC_ENV_BSDAPP) += malloc_heap.c
lib/librte_eal/common/Makefile +1 -1
index 48f870f24bef..68a680bcb934 100644
@@ -16,7 +16,7 @@ INC += rte_pci_dev_feature_defs.h rte_pci_dev_features.h
 INC += rte_malloc.h rte_keepalive.h rte_time.h
 INC += rte_service.h rte_service_component.h
 INC += rte_bitmap.h rte_vfio.h rte_hypervisor.h rte_test.h
-INC += rte_reciprocal.h rte_fbarray.h
+INC += rte_reciprocal.h rte_fbarray.h rte_uuid.h
 
 GENERIC_INC := rte_atomic.h rte_byteorder.h rte_cycles.h rte_prefetch.h
 GENERIC_INC += rte_spinlock.h rte_memcpy.h rte_cpuflags.h rte_rwlock.h
lib/librte_eal/common/eal_common_uuid.c new file +193 -0

193 lines not on this page · raw message

lib/librte_eal/common/include/rte_uuid.h new file +129 -0

129 lines not on this page · raw message

lib/librte_eal/common/meson.build +2 -0
index 8a3dcfee091b..e184e4d7413d 100644
@@ -25,6 +25,7 @@ common_sources = files(
 	'eal_common_tailqs.c',
 	'eal_common_thread.c',
 	'eal_common_timer.c',
+	'eal_common_uuid.c',
 	'malloc_elem.c',
 	'malloc_heap.c',
 	'malloc_mp.c',
@@ -75,6 +76,7 @@ common_headers = files(
 	'include/rte_string_fns.h',
 	'include/rte_tailq.h',
 	'include/rte_time.h',
+	'include/rte_uuid.h',
 	'include/rte_version.h')
 
 # special case install the generic headers, since they go in a subdir
lib/librte_eal/linuxapp/eal/Makefile +1 -0
index 3719ec9d7d53..927a80fec907 100644
@@ -66,6 +66,7 @@ SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_options.c
 SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_thread.c
 SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_proc.c
 SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_fbarray.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_uuid.c
 SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += rte_malloc.c
 SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += malloc_elem.c
 SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += malloc_heap.c
Signature · 1 line
2.17.0
#2 lore raw

PATCH v8 2/5 bus/vmbus: add hyper-v virtual bus support

In reply to Stephen Hemminger

This patch adds support for an additional bus type Virtual Machine BUS (VMBUS) on Microsoft Hyper-V in Windows 10, Windows Server 2016 and Azure. Most of this code was extracted from FreeBSD and some of this is from earlier code donated by Brocade.

Only Linux is supported at present, but the code is split to allow future FreeBSD and Windows support.

The bus support relies on the uio_hv_generic driver from Linux kernel 4.16. Multiple queue support requires additional sysfs interfaces which is in kernel 5.0 (a.k.a 4.17).

---
 MAINTAINERS                                 |   3 +
 config/common_base                          |   5 +
 drivers/bus/Makefile                        |   1 +
 drivers/bus/vmbus/Makefile                  |  36 ++
 drivers/bus/vmbus/linux/Makefile            |   3 +
 drivers/bus/vmbus/linux/vmbus_bus.c         | 355 +++++++++++++++++
 drivers/bus/vmbus/linux/vmbus_uio.c         | 390 +++++++++++++++++++
 drivers/bus/vmbus/private.h                 | 132 +++++++
 drivers/bus/vmbus/rte_bus_vmbus.h           | 396 +++++++++++++++++++
 drivers/bus/vmbus/rte_bus_vmbus_version.map |  28 ++
 drivers/bus/vmbus/rte_vmbus_reg.h           | 344 +++++++++++++++++
 drivers/bus/vmbus/vmbus_bufring.c           | 241 ++++++++++++
 drivers/bus/vmbus/vmbus_channel.c           | 406 ++++++++++++++++++++
 drivers/bus/vmbus/vmbus_common.c            | 286 ++++++++++++++
 drivers/bus/vmbus/vmbus_common_uio.c        | 232 +++++++++++
 mk/rte.app.mk                               |   1 +
 16 files changed, 2859 insertions(+)
 create mode 100644 drivers/bus/vmbus/Makefile
 create mode 100644 drivers/bus/vmbus/linux/Makefile
 create mode 100644 drivers/bus/vmbus/linux/vmbus_bus.c
 create mode 100644 drivers/bus/vmbus/linux/vmbus_uio.c
 create mode 100644 drivers/bus/vmbus/private.h
 create mode 100644 drivers/bus/vmbus/rte_bus_vmbus.h
 create mode 100644 drivers/bus/vmbus/rte_bus_vmbus_version.map
 create mode 100644 drivers/bus/vmbus/rte_vmbus_reg.h
 create mode 100644 drivers/bus/vmbus/vmbus_bufring.c
 create mode 100644 drivers/bus/vmbus/vmbus_channel.c
 create mode 100644 drivers/bus/vmbus/vmbus_common.c
 create mode 100644 drivers/bus/vmbus/vmbus_common_uio.c
MAINTAINERS +3 -0
index 2663f1c037d7..e20411f0921a 100644
@@ -417,6 +417,9 @@ F: drivers/bus/pci/
 VDEV bus driver
 F: drivers/bus/vdev/
 
+VMBUS bus driver
+M: Stephen Hemminger <[email protected]>
+F: drivers/bus/vmbus/
 
 Networking Drivers
 ------------------
config/common_base +5 -0
index c4dba709d152..3031f6e17ecf 100644
@@ -401,6 +401,11 @@ CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
 CONFIG_RTE_LIBRTE_MVPP2_PMD=n
 
 #
+# Compile support for VMBus library
+#
+CONFIG_RTE_LIBRTE_VMBUS=n
+
+
 # Compile virtual device driver for NetVSC on Hyper-V/Azure
 #
 CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
drivers/bus/Makefile +1 -0
index ef7f24751974..cea3b55e60c9 100644
@@ -10,5 +10,6 @@ endif
 DIRS-$(CONFIG_RTE_LIBRTE_IFPGA_BUS) += ifpga
 DIRS-$(CONFIG_RTE_LIBRTE_PCI_BUS) += pci
 DIRS-$(CONFIG_RTE_LIBRTE_VDEV_BUS) += vdev
+DIRS-$(CONFIG_RTE_LIBRTE_VMBUS) += vmbus
 
 include $(RTE_SDK)/mk/rte.subdir.mk
drivers/bus/vmbus/Makefile new file +36 -0
new file mode 100644
index 000000000000..bd18a71154af
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: BSD-3-Clause
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+LIB = librte_bus_vmbus.a
+LIBABIVER := 1
+EXPORT_MAP := rte_bus_vmbus_version.map
+
+CFLAGS += -I$(SRCDIR)
+CFLAGS += -O3 $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
+
+ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),)
+SYSTEM := linux
+endif
+ifneq ($(CONFIG_RTE_EXEC_ENV_BSDAPP),)
+$(error "VMBUS not implemented for BSD yet")
+endif
+
+CFLAGS += -I$(RTE_SDK)/drivers/bus/vmbus/$(SYSTEM)
+CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common
+CFLAGS += -I$(RTE_SDK)/lib/librte_eal/$(SYSTEM)app/eal
+
+LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
+LDLIBS += -lrte_ethdev -luuid
+
+include $(RTE_SDK)/drivers/bus/vmbus/$(SYSTEM)/Makefile
+SRCS-$(CONFIG_RTE_LIBRTE_VMBUS) := $(addprefix $(SYSTEM)/,$(SRCS))
+SRCS-$(CONFIG_RTE_LIBRTE_VMBUS) += vmbus_common.c
+SRCS-$(CONFIG_RTE_LIBRTE_VMBUS) += vmbus_channel.c vmbus_bufring.c
+SRCS-$(CONFIG_RTE_LIBRTE_VMBUS) += vmbus_common_uio.c
+
+SYMLINK-$(CONFIG_RTE_LIBRTE_VMBUS)-include += rte_bus_vmbus.h
+SYMLINK-$(CONFIG_RTE_LIBRTE_VMBUS)-include += rte_vmbus_reg.h
+
+include $(RTE_SDK)/mk/rte.lib.mk
drivers/bus/vmbus/linux/Makefile new file +3 -0
new file mode 100644
index 000000000000..ef0d30b2d3aa
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: BSD-3-Clause
+
+SRCS += vmbus_bus.c vmbus_uio.c
drivers/bus/vmbus/linux/vmbus_bus.c new file +355 -0

355 lines not on this page · raw message

drivers/bus/vmbus/linux/vmbus_uio.c new file +390 -0

390 lines not on this page · raw message

drivers/bus/vmbus/private.h new file +132 -0

132 lines not on this page · raw message

drivers/bus/vmbus/rte_bus_vmbus.h new file +396 -0

396 lines not on this page · raw message

drivers/bus/vmbus/rte_bus_vmbus_version.map new file +28 -0
new file mode 100644
index 000000000000..445081ae2f8c
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+DPDK_18.05 {
+	global:
+
+	rte_vmbus_chan_close;
+	rte_vmbus_chan_open;
+	rte_vmbus_chan_recv;
+	rte_vmbus_chan_recv_raw;
+	rte_vmbus_chan_rx_empty;
+	rte_vmbus_chan_send;
+	rte_vmbus_chan_send_sglist;
+	rte_vmbus_chan_signal_tx;
+	rte_vmbus_irq_mask;
+	rte_vmbus_irq_read;
+	rte_vmbus_irq_unmask;
+	rte_vmbus_map_device;
+	rte_vmbus_max_channels;
+	rte_vmbus_probe;
+	rte_vmbus_probe_one;
+	rte_vmbus_register;
+	rte_vmbus_scan;
+	rte_vmbus_sub_channel_index;
+	rte_vmbus_subchan_open;
+	rte_vmbus_unmap_device;
+	rte_vmbus_unregister;
+
+	local: *;
+};
drivers/bus/vmbus/rte_vmbus_reg.h new file +344 -0

344 lines not on this page · raw message

drivers/bus/vmbus/vmbus_bufring.c new file +241 -0

241 lines not on this page · raw message

drivers/bus/vmbus/vmbus_channel.c new file +406 -0

406 lines not on this page · raw message

drivers/bus/vmbus/vmbus_common.c new file +286 -0

286 lines not on this page · raw message

drivers/bus/vmbus/vmbus_common_uio.c new file +232 -0

232 lines not on this page · raw message

mk/rte.app.mk +1 -0
index 438f99d8712e..76a1033881d8 100644
@@ -197,6 +197,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_IFCVF_VDPA_PMD) += -lrte_ifcvf_vdpa
 endif # $(CONFIG_RTE_EAL_VFIO)
 endif # $(CONFIG_RTE_LIBRTE_VHOST)
 _LDLIBS-$(CONFIG_RTE_LIBRTE_VMXNET3_PMD)    += -lrte_pmd_vmxnet3_uio
+_LDLIBS-$(CONFIG_RTE_LIBRTE_VMBUS)	    += -lrte_bus_vmbus
 
 ifeq ($(CONFIG_RTE_LIBRTE_BBDEV),y)
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL)     += -lrte_pmd_bbdev_null
Signature · 1 line
2.17.0
#3 lore raw

PATCH v8 3/5 net/netvsc: add hyper-v netvsc network device

In reply to Stephen Hemminger

The driver supports Hyper-V networking directly like virtio for KVM or vmxnet3 for VMware.

This code is based off of the FreeBSD driver. The file and variable names are kept the same to help with understanding (with most of the BSD style warts removed).

This version supports the latest NetVSP 6.1 version and older versions.

---
 MAINTAINERS                                   |    8 +
 config/common_base                            |    8 +
 config/common_linuxapp                        |    3 +
 drivers/net/Makefile                          |    1 +
 drivers/net/netvsc/Makefile                   |   23 +
 drivers/net/netvsc/hn_ethdev.c                |  761 ++++++++++
 drivers/net/netvsc/hn_logs.h                  |   35 +
 drivers/net/netvsc/hn_nvs.c                   |  535 ++++++++
 drivers/net/netvsc/hn_nvs.h                   |  245 ++++
 drivers/net/netvsc/hn_rndis.c                 | 1101 +++++++++++++++
 drivers/net/netvsc/hn_rndis.h                 |   26 +
 drivers/net/netvsc/hn_rxtx.c                  | 1221 +++++++++++++++++
 drivers/net/netvsc/hn_var.h                   |  139 ++
 drivers/net/netvsc/ndis.h                     |  378 +++++
 drivers/net/netvsc/rndis.h                    |  414 ++++++
 drivers/net/netvsc/rte_pmd_netvsc_version.map |    5 +
 mk/rte.app.mk                                 |    1 +
 17 files changed, 4904 insertions(+)
 create mode 100644 drivers/net/netvsc/Makefile
 create mode 100644 drivers/net/netvsc/hn_ethdev.c
 create mode 100644 drivers/net/netvsc/hn_logs.h
 create mode 100644 drivers/net/netvsc/hn_nvs.c
 create mode 100644 drivers/net/netvsc/hn_nvs.h
 create mode 100644 drivers/net/netvsc/hn_rndis.c
 create mode 100644 drivers/net/netvsc/hn_rndis.h
 create mode 100644 drivers/net/netvsc/hn_rxtx.c
 create mode 100644 drivers/net/netvsc/hn_var.h
 create mode 100644 drivers/net/netvsc/ndis.h
 create mode 100644 drivers/net/netvsc/rndis.h
 create mode 100644 drivers/net/netvsc/rte_pmd_netvsc_version.map
MAINTAINERS +8 -0
index e20411f0921a..ec735cff2a36 100644
@@ -594,6 +594,14 @@ F: drivers/net/vdev_netvsc/
 F: doc/guides/nics/vdev_netvsc.rst
 F: doc/guides/nics/features/vdev_netvsc.ini
 
+Microsoft Hyper-V netvsc - EXPERIMENTAL
+M: Stephen Hemminger <[email protected]>
+M: "K. Y. Srinivasan" <[email protected]>
+M: Haiyang Zhang <[email protected]>
+F: drivers/net/hyperv/
+F: doc/guides/nics/netvsc.rst
+F: doc/guides/nics/features/netvsc.ini
+
 Netcope szedata2
 M: Matej Vido <[email protected]>
 F: drivers/net/szedata2/
config/common_base +8 -0
index 3031f6e17ecf..03b7b0ed7f5d 100644
@@ -405,7 +405,15 @@ CONFIG_RTE_LIBRTE_MVPP2_PMD=n
 #
 CONFIG_RTE_LIBRTE_VMBUS=n
 
+#
+# Compile native PMD for Hyper-V/Azure
+#
+CONFIG_RTE_LIBRTE_NETVSC_PMD=n
+CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
 
+#
 # Compile virtual device driver for NetVSC on Hyper-V/Azure
 #
 CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
config/common_linuxapp +3 -0
index 5c68cc0ff440..b452ccd87990 100644
@@ -25,6 +25,9 @@ CONFIG_RTE_LIBRTE_POWER=y
 CONFIG_RTE_VIRTIO_USER=y
 CONFIG_RTE_PROC_INFO=y
 
+CONFIG_RTE_LIBRTE_VMBUS=y
+CONFIG_RTE_LIBRTE_NETVSC_PMD=y
+
 # NXP DPAA BUS and drivers
 CONFIG_RTE_LIBRTE_DPAA_BUS=y
 CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=y
drivers/net/Makefile +1 -0
index 9f9da665173a..7cfc08d6f340 100644
@@ -33,6 +33,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_LIO_PMD) += liquidio
 DIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += mlx4
 DIRS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5
 DIRS-$(CONFIG_RTE_LIBRTE_MVPP2_PMD) += mvpp2
+DIRS-$(CONFIG_RTE_LIBRTE_NETVSC_PMD) += netvsc
 DIRS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += nfp
 DIRS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += null
drivers/net/netvsc/Makefile new file +23 -0
new file mode 100644
index 000000000000..3c713af3c8fc
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: BSD-3-Clause
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+LIB = librte_pmd_netvsc.a
+
+CFLAGS += -O3 $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
+
+EXPORT_MAP := rte_pmd_netvsc_version.map
+
+LIBABIVER := 1
+
+SRCS-$(CONFIG_RTE_LIBRTE_NETVSC_PMD) += hn_ethdev.c
+SRCS-$(CONFIG_RTE_LIBRTE_NETVSC_PMD) += hn_rxtx.c
+SRCS-$(CONFIG_RTE_LIBRTE_NETVSC_PMD) += hn_rndis.c
+SRCS-$(CONFIG_RTE_LIBRTE_NETVSC_PMD) += hn_nvs.c
+
+LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
+LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs
+LDLIBS += -lrte_bus_vmbus
+
+include $(RTE_SDK)/mk/rte.lib.mk
drivers/net/netvsc/hn_ethdev.c new file +761 -0

761 lines not on this page · raw message

drivers/net/netvsc/hn_logs.h new file +35 -0
new file mode 100644
index 000000000000..f821655b83a6
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+
+#ifndef _HN_LOGS_H_
+#define _HN_LOGS_H_
+
+#include <rte_log.h>
+
+extern int hn_logtype_init;
+
+#define PMD_INIT_LOG(level, fmt, args...) \
+	rte_log(RTE_LOG_ ## level, hn_logtype_init, "%s(): " fmt "\n",\
+		__func__, ## args)
+#define PMD_INIT_FUNC_TRACE() PMD_INIT_LOG(DEBUG, " >>")
+
+#ifdef RTE_LIBRTE_NETVSC_DEBUG_RX
+#define PMD_RX_LOG(level, fmt, args...) \
+	RTE_LOG(level, PMD, "%s() rx: " fmt "\n", __func__, ## args)
+#else
+#define PMD_RX_LOG(level, fmt, args...) do { } while (0)
+#endif
+
+#ifdef RTE_LIBRTE_NETVSC_DEBUG_TX
+#define PMD_TX_LOG(level, fmt, args...) \
+	RTE_LOG(level, PMD, "%s() tx: " fmt "\n", __func__, ## args)
+#else
+#define PMD_TX_LOG(level, fmt, args...) do { } while (0)
+#endif
+
+
+extern int hn_logtype_driver;
+#define PMD_DRV_LOG(level, fmt, args...) \
+	rte_log(RTE_LOG_ ## level, hn_logtype_driver, "%s(): " fmt "\n", \
+		__func__, ## args)
+
+#endif /* _HN_LOGS_H_ */
drivers/net/netvsc/hn_nvs.c new file +535 -0

535 lines not on this page · raw message

drivers/net/netvsc/hn_nvs.h new file +245 -0

245 lines not on this page · raw message

drivers/net/netvsc/hn_rndis.c new file +1101 -0

1,101 lines not on this page · raw message

drivers/net/netvsc/hn_rndis.h new file +26 -0
new file mode 100644
index 000000000000..f82f6d69d490
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+
+#include "rndis.h"
+
+struct hn_data;
+
+void hn_rndis_receive_response(struct hn_data *hv,
+			      const void *data, uint32_t len);
+void	hn_rndis_link_status(struct hn_data *hv, const void *data);
+int	hn_rndis_attach(struct hn_data *hv);
+void	hn_rndis_detach(struct hn_data *hv);
+int	hn_rndis_get_eaddr(struct hn_data *hv, uint8_t *eaddr);
+int	hn_rndis_get_linkstatus(struct hn_data *hv);
+int	hn_rndis_get_linkspeed(struct hn_data *hv);
+int	hn_rndis_set_rxfilter(struct hn_data *hv, uint32_t filter);
+void	hn_rndis_rx_ctrl(struct hn_data *hv, const void *data,
+			 int dlen);
+int	hn_rndis_get_offload(struct hn_data *hv,
+			     struct rte_eth_dev_info *dev_info);
+int	hn_rndis_conf_offload(struct hn_data *hv,
+			      uint64_t tx_offloads,
+			      uint64_t rx_offloads);
+int	hn_rndis_query_rsscaps(struct hn_data *hv,
+			       unsigned int *rxr_cnt0);
+int	hn_rndis_conf_rss(struct hn_data *hv,
+			  const struct rte_eth_rss_conf *rss_conf);
drivers/net/netvsc/hn_rxtx.c new file +1221 -0

229 lines not on this page · raw message

drivers/net/netvsc/hn_var.h new file +139 -0

139 lines not on this page · raw message

drivers/net/netvsc/ndis.h new file +378 -0

378 lines not on this page · raw message

drivers/net/netvsc/rndis.h new file +414 -0

414 lines not on this page · raw message

drivers/net/netvsc/rte_pmd_netvsc_version.map new file +5 -0
new file mode 100644
index 000000000000..916e924c2093

Lines of this file are not shown. View the raw message.

mk/rte.app.mk +1 -0
index 76a1033881d8..e22047d8ca43 100644

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.17.0

Part of the diff is not shown here. View the raw message.

#4 lore raw

PATCH v8 4/5 net/netvsc: add documentation

In reply to Stephen Hemminger

From: Stephen Hemminger <[email protected]>

Matching documentation for new netvsc device.

---
 doc/guides/nics/features/netvsc.ini    |  23 ++++++
 doc/guides/nics/index.rst              |   1 +
 doc/guides/nics/netvsc.rst             | 103 +++++++++++++++++++++++++
 doc/guides/rel_notes/release_18_08.rst |  49 ++++++++++++
 4 files changed, 176 insertions(+)
 create mode 100644 doc/guides/nics/features/netvsc.ini
 create mode 100644 doc/guides/nics/netvsc.rst
 create mode 100644 doc/guides/rel_notes/release_18_08.rst
doc/guides/nics/features/netvsc.ini new file +23 -0
new file mode 100644
index 000000000000..2ff6042bf47b
@@ -0,0 +1,23 @@
+;
+; Supported features of the 'netvsc' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Speed capabilities   = P
+Link status          = Y
+Queue start/stop     = Y
+Scattered Rx         = Y
+Promiscuous mode     = Y
+Allmulticast mode    = Y
+Basic stats          = Y
+Stats per queue      = Y
+Extended stats       = Y
+Multiprocess aware   = Y
+Other kdrv           = Y
+ARMv7                = Y
+ARMv8                = Y
+x86-32               = Y
+x86-64               = Y
+Usage doc            = Y
+MTU update           = Y
doc/guides/nics/index.rst +1 -0
index ddb9eb7a922e..d4eae2b8f046 100644
@@ -33,6 +33,7 @@ Network Interface Controller Drivers
     mlx4
     mlx5
     mvpp2
+    netvsc
     nfp
     octeontx
     qede
doc/guides/nics/netvsc.rst new file +103 -0

103 lines not on this page · raw message

doc/guides/rel_notes/release_18_08.rst new file +49 -0

49 lines not on this page · raw message

Signature · 1 line
2.17.0
#5 lore raw

Re: [PATCH v8 4/5] net/netvsc: add documentation

Quoted 22 lines

-----Original Message-----
From: dev [mailto:[email protected]] On Behalf Of Stephen Hemminger
Sent: Tuesday, May 15, 2018 10:20 PM
To: [email protected]
Cc: Stephen Hemminger <[email protected]>
Subject: [dpdk-dev] [PATCH v8 4/5] net/netvsc: add documentation

From: Stephen Hemminger <[email protected]>

Matching documentation for new netvsc device.

---
 doc/guides/nics/features/netvsc.ini    |  23 ++++++
 doc/guides/nics/index.rst              |   1 +
 doc/guides/nics/netvsc.rst             | 103 +++++++++++++++++++++++++
 doc/guides/rel_notes/release_18_08.rst |  49 ++++++++++++
 4 files changed, 176 insertions(+)
 create mode 100644 doc/guides/nics/features/netvsc.ini
 create mode 100644 doc/guides/nics/netvsc.rst  create mode 100644
Quoted 2 lines

doc/guides/rel_notes/release_18_08.rst

Question is this targeting 18.08 release if so there is some inconsistencies in your other patch Sets as the drivers/bus/vmbus/rte_bus_vmbus_version.map has a DPDK_18.05 tag on it and drivers/net/netvsc/rte_pmd_netvsc_version.map has one too ??

Marko K

#6 lore raw

PATCH v8 5/5 bus/vmbus and net/netvsc: add meson build support

In reply to Stephen Hemminger

From: Stephen Hemminger <[email protected]>

Update meson build files for new netvsc and vmbus drivers.

---
 config/meson.build             |  7 +++++++
 drivers/bus/meson.build        |  2 +-
 drivers/bus/vmbus/meson.build  | 16 ++++++++++++++++
 drivers/net/meson.build        |  2 +-
 drivers/net/netvsc/meson.build | 13 +++++++++++++
 5 files changed, 38 insertions(+), 2 deletions(-)
 create mode 100644 drivers/bus/vmbus/meson.build
 create mode 100644 drivers/net/netvsc/meson.build
config/meson.build +7 -0
index 2179c689c14d..34759d505881 100644
@@ -50,6 +50,13 @@ if host_machine.system() == 'linux' and cc.find_library('bsd',
 	dpdk_extra_ldflags += '-lbsd'
 endif
 
+# vmbus depends on lib uuid
+uuid_dep = cc.find_library('uuid', required: false)
+if uuid_dep.found() and cc.has_header('uuid/uuid.h')
+	add_project_link_arguments('-luuid', language: 'c')
+	dpdk_extra_ldflags += '-luuid'
+endif
+
 # add -include rte_config to cflags
 add_project_arguments('-include', 'rte_config.h', language: 'c')
 
drivers/bus/meson.build +1 -1
index 52c755dcfd8e..80de2d91d52d 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017 Intel Corporation
 
-drivers = ['dpaa', 'fslmc', 'ifpga', 'pci', 'vdev']
+drivers = ['dpaa', 'fslmc', 'ifpga', 'pci', 'vdev', 'vmbus']
 std_deps = ['eal']
 config_flag_fmt = 'RTE_LIBRTE_@0@_BUS'
 driver_name_fmt = 'rte_bus_@0@'
drivers/bus/vmbus/meson.build new file +16 -0
new file mode 100644
index 000000000000..8a17be828a32
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: BSD-3-Clause
+
+install_headers('rte_bus_vmbus.h','rte_vmbus_reg.h')
+
+sources = files('vmbus_common.c',
+		'vmbus_channel.c',
+		'vmbus_bufring.c',
+		'vmbus_common_uio.c')
+
+if host_machine.system() == 'linux'
+	sources += files('linux/vmbus_bus.c',
+			'linux/vmbus_uio.c')
+	includes += include_directories('linux')
+else
+	build = false
+endif
drivers/net/meson.build +1 -1
index b7d00a04c8ef..74d6c0f7cabf 100644
@@ -3,7 +3,7 @@
 
 drivers = ['af_packet', 'axgbe', 'bonding', 'dpaa', 'dpaa2',
 	'e1000', 'enic', 'fm10k', 'i40e', 'ixgbe',
-	'mvpp2', 'null', 'octeontx', 'pcap', 'ring',
+	'mvpp2', 'netvsc', 'null', 'octeontx', 'pcap', 'ring',
 	'sfc', 'thunderx', 'virtio']
 std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc
 std_deps += ['bus_pci']         # very many PMDs depend on PCI, so make std
drivers/net/netvsc/meson.build new file +13 -0
new file mode 100644
index 000000000000..44926b20e973
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Microsoft Corporation
+
+version = 2
+
+allow_experimental_apis = true
+
+sources = files('hn_ethdev.c',
+		'hn_rxtx.c',
+		'hn_rndis.c',
+		'hn_nvs.c')
+
+deps += ['bus_vmbus' ]
Signature · 1 line
2.17.0