Iotrace improvements
cover Iotrace improvements
These set of patches add few improvements to iotrace.
* Region limiting - allows setting an address and size where only
io operations that falls into that address are logged.
* Timestamping - Timestamp every iotrace record with current timestamp
* dumping - iotrace dump command for dumping all records from buffer
in a readable fashion.
In terms of backwards compatibility, the timestamp is not backward compatible as it changes the iotrace record. so if one developed an offline parsing tool it will be broken.
I though of adding #ifdef specific for that, but eventually I didn't.
Ramon Fried (5):
cmd: iotrace: add set region command
iotrace: add IO region limit
common: iotrace: add timestamp to iotrace records
iotrace: move record definitons to header file
cmd: iotrace: add dump trace command
cmd/iotrace.c | 58 ++++++++++++++++++++++++++++++++++++++++++++++- common/iotrace.c | 53 +++++++++++++++++++++++-------------------- include/iotrace.h | 52 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 137 insertions(+), 26 deletions(-)
Signature · 1 line
2.17.0
PATCH 1/5 cmd: iotrace: add set region command
--- cmd/iotrace.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
cmd/iotrace.c +22 -0
@@ -15,6 +15,9 @@ static void do_print_stats(void)iotrace_get_buffer (&start, &size, &offset, &count);printf ("Start: %08lx\n" , start);printf ("Size: %08lx\n" , size); +iotrace_get_region (&start, &size); +printf ("Region: %08lx\n" , start); +printf ("Size: %08lx\n" , size);printf ("Offset: %08lx\n" , offset);printf ("Output: %08lx\n" , start + offset);printf ("Count: %08lx\n" , count);
@@ -37,6 +40,22 @@ static int do_set_buffer(int argc, char * const argv[])return 0 ; } +static int do_set_region (int argc,char *const argv[]) +{ +ulong addr =0 , size =0 ; + +if (argc ==2 ) { + addr =simple_strtoul (*argv++,NULL ,16 ); + size =simple_strtoul (*argv++,NULL ,16 ); + }else if (argc !=0 ) { +return CMD_RET_USAGE ; + } + +iotrace_set_region (addr, size); + +return 0 ; +} +int do_iotrace (cmd_tbl_t *cmdtp,int flag,int argc,char *const argv[]) {const char *cmd = argc <2 ?NULL : argv[1 ];
@@ -46,6 +65,8 @@ int do_iotrace(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])switch (*cmd) {case 'b' :return do_set_buffer (argc -2 , argv +2 ); +case 'l' : +return do_set_region (argc -2 , argv +2 );case 'p' :iotrace_set_enabled (0 );break ;
@@ -67,6 +88,7 @@ U_BOOT_CMD("iotrace utility commands" ,"stats - display iotrace stats\n" "iotrace buffer <address> <size> - set iotrace buffer\n" +"iotrace limit <address> <size> - set iotrace region limit\n" "iotrace pause - pause tracing\n" "iotrace resume - resume tracing" );
Signature · 1 line
2.17.0
PATCH 2/5 iotrace: add IO region limit
In reply to Ramon FriedWhen dealing with a lot of IO regions, sometimes
it makes sense only to trace a specific one.
This patch adds support for region limits.
If region is not set, the iotrace works the same as it was. If region is set, the iotrace only logs io operation that falls in the defined region.
--- common/iotrace.c | 27 +++++++++++++++++++++++++++ include/iotrace.h | 24 ++++++++++++++++++++++++ 2 files changed, 51 insertions(+)
common/iotrace.c +27 -0
@@ -42,6 +42,8 @@ struct iotrace_record {* @start: Start address of iotrace buffer * @size: Size of iotrace buffer in bytes * @offset: Current write offset into iotrace buffer +* @region_start: Address of IO region to trace +* @region_size: Size of region to trace. if 0 will trace all address space * @crc32: Current value of CRC chceksum of trace records * @enabled: true if enabled, false if disabled */
@@ -49,6 +51,8 @@ static struct iotrace {ulong start;ulong size;ulong offset; +ulong region_start; +ulong region_size;u32 crc32;bool enabled; } iotrace;
@@ -66,6 +70,11 @@ static void add_record(int flags, const void *ptr, ulong value)if (!(gd->flags &GD_FLG_RELOC ) || !iotrace.enabled)return ; +if (iotrace.region_size) +if ((ulong )ptr < iotrace.region_start || + (ulong )ptr > iotrace.region_start + iotrace.region_size) +return ; +/* Store it if there is room */ if (iotrace.offset +sizeof (*rec) < iotrace.size) { rec = (struct iotrace_record *)map_sysmem(
@@ -142,6 +151,24 @@ u32 iotrace_get_checksum(void)return iotrace.crc32; } +void iotrace_set_region (ulong start,ulong size) +{ + iotrace.region_start = start; + iotrace.region_size = size; +} + +void iotrace_reset_region (void ) +{ + iotrace.region_start =0 ; + iotrace.region_size =0 ; +} + +void iotrace_get_region (ulong *start,ulong *size) +{ + *start = iotrace.region_start; + *size = iotrace.region_size; +} +void iotrace_set_enabled (int enable) { iotrace.enabled = enable;
include/iotrace.h +24 -0
@@ -58,6 +58,30 @@ void iotrace_reset_checksum(void);*/ u32 iotrace_get_checksum (void ); +/** +* iotrace_set_region() - Set whether iotrace is limited to a specific +* io region. +* +* Defines the address and size of the limited region. +* +* @start: address of the beginning of the region +* @size: size of the region in bytes. +*/ +void iotrace_set_region (ulong start,ulong size); + +/** +* iotrace_reset_region() - Reset the region limit +*/ +void iotrace_reset_region (void ); + +/** +* iotrace_get_region() - Get region information +* +* @start: Returns start address of region +* @size: Returns size of region in bytes +*/ +void iotrace_get_region (ulong *start,ulong *size); +/** * iotrace_set_enabled() - Set whether iotracing is enabled or not *
Signature · 1 line
2.17.0
PATCH 3/5 common: iotrace: add timestamp to iotrace records
In reply to Ramon FriedAdd timestamp to each iotrace record to aid in debugging of IO timing access bugs.
--- common/iotrace.c | 3 +++ 1 file changed, 3 insertions(+)
common/iotrace.c +3 -0
@@ -27,11 +27,13 @@ enum iotrace_flags {* struct iotrace_record - Holds a single I/O trace record * * @flags: I/O access type +* @timestamp: Timestamp of access * @addr: Address of access * @value: Value written or read */ struct iotrace_record {enum iotrace_flags flags; +u64 timestamp;phys_addr_t addr;iovalue_t value; };
@@ -82,6 +84,7 @@ static void add_record(int flags, const void *ptr, ulong value) sizeof(value)); } + rec->timestamp =get_ticks (); rec->flags = flags; rec->addr =map_to_sysmem (ptr); rec->value = value;
Signature · 1 line
2.17.0
PATCH 4/5 iotrace: move record definitons to header file
In reply to Ramon FriedThe header definitions are needed for reading
record information in cmd/iotrace.c
--- common/iotrace.c | 27 --------------------------- include/iotrace.h | 28 ++++++++++++++++++++++++++++ 2 files changed, 28 insertions(+), 27 deletions(-)
common/iotrace.c +0 -27
@@ -11,33 +11,6 @@DECLARE_GLOBAL_DATA_PTR ; -/* Support up to the machine word length for now */ -typedef ulong iovalue_t ; - -enum iotrace_flags { -IOT_8 =0 , -IOT_16 , -IOT_32 , - -IOT_READ =0 <<3 , -IOT_WRITE =1 <<3 , -}; - -/** -* struct iotrace_record - Holds a single I/O trace record -* -* @flags: I/O access type -* @timestamp: Timestamp of access -* @addr: Address of access -* @value: Value written or read -*/ -struct iotrace_record { -enum iotrace_flags flags; -u64 timestamp; -phys_addr_t addr; -iovalue_t value; -}; -/** * struct iotrace - current trace status and checksum *
include/iotrace.h +28 -0
@@ -7,6 +7,34 @@#define __IOTRACE_H#include <linux/types.h> +#include <common.h> + +/* Support up to the machine word length for now */ +typedef ulong iovalue_t ; + +enum iotrace_flags { +IOT_8 =0 , +IOT_16 , +IOT_32 , + +IOT_READ =0 <<3 , +IOT_WRITE =1 <<3 , +}; + +/** +* struct iotrace_record - Holds a single I/O trace record +* +* @flags: I/O access type +* @timestamp: Timestamp of access +* @addr: Address of access +* @value: Value written or read +*/ +struct iotrace_record { +enum iotrace_flags flags; +u64 timestamp; +phys_addr_t addr; +iovalue_t value; +};/* * This file is designed to be included in arch/<arch>/include/asm/io.h.
Signature · 1 line
2.17.0
PATCH 5/5 cmd: iotrace: add dump trace command
In reply to Ramon FriedAdd dump trace command which dump all trace
buffer content in a much more readable fashion
than md.
--- cmd/iotrace.c | 36 +++++++++++++++++++++++++++++++++++- 1 file changed, 35 insertions(+), 1 deletion(-)
cmd/iotrace.c +35 -1
@@ -24,6 +24,36 @@ static void do_print_stats(void)printf ("CRC32: %08lx\n" , (ulong )iotrace_get_checksum ()); } +static void do_print_trace (void ) +{ +ulong start, size, offset, count; + +struct iotrace_record *cur_record; + +iotrace_get_buffer (&start, &size, &offset, &count); + +if (!start || !size || !count) +return ; + +printf ("Timestamp Value Address\n" ); + + cur_record = (struct iotrace_record *)start; +for (int i =0 ; i < count; i++) { +if (cur_record->flags &IOT_WRITE ) +printf ("%08llu: 0x%08lx --> 0x%lx08\n" , + cur_record->timestamp, + cur_record->value, + cur_record->addr); +else +printf ("%08llu: 0x%08lx <-- 0x%lx08\n" , + cur_record->timestamp, + cur_record->value, + cur_record->addr); + + cur_record++; + } +} +static int do_set_buffer (int argc,char *const argv[]) {ulong addr =0 , size =0 ;
@@ -76,6 +106,9 @@ int do_iotrace(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])case 's' :do_print_stats ();break ; +case 'd' : +do_print_trace (); +break ;default :return CMD_RET_USAGE ; }
@@ -90,5 +123,6 @@ U_BOOT_CMD("iotrace buffer <address> <size> - set iotrace buffer\n" "iotrace limit <address> <size> - set iotrace region limit\n" "iotrace pause - pause tracing\n" -"iotrace resume - resume tracing" +"iotrace resume - resume tracing\n" +"iotrace dump - dump iotrace buffer" );
Signature · 1 line
2.17.0
PATCH 5/5 cmd: iotrace: add dump trace command
Hi Ramon,
Quoted 9 lines · Ramon Fried
Add dump trace command which dump all trace
buffer content in a much more readable fashion
than md.Signed-off-by Ramon Fried <[email protected]>--- cmd/iotrace.c | 36 +++++++++++++++++++++++++++++++++++- 1 file changed, 35 insertions(+), 1 deletion(-)
Please see bootstage - I think the timestamp should be in microseconds.
Regards,
Simon