Skip to contentSkip to conversation

drm/i915/crt: make intel_crt_reset() static again

PATCH In review Jani Nikula 4 participants 8 messages Jun 21, 2018 – Jun 28, 2018

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/i915/crt: make intel_crt_reset() static again

Commit 9504a8924759 ("drm/i915/vlv: Reset the ADPA in vlv_display_power_well_init()") started calling intel_crt_reset() directly, while we could just as well use the hooks and keep the function static.

Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/intel_crt.c        | 2 +-
 drivers/gpu/drm/i915/intel_drv.h        | 1 -
 drivers/gpu/drm/i915/intel_runtime_pm.c | 2 +-
 3 files changed, 2 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_crt.c +1 -1
index 0c6bf82bb059..c2cb3b7a255b 100644
@@ -881,7 +881,7 @@ static int intel_crt_get_modes(struct drm_connector *connector)
 	return ret;
 }
 
-void intel_crt_reset(struct drm_encoder *encoder)
+static void intel_crt_reset(struct drm_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->dev);
 	struct intel_crt *crt = intel_encoder_to_crt(to_intel_encoder(encoder));
drivers/gpu/drm/i915/intel_drv.h +0 -1
index 0c3ac0eafde0..b2002fee1b58 100644
@@ -1373,7 +1373,6 @@ void gen9_disable_guc_interrupts(struct drm_i915_private *dev_priv);
 bool intel_crt_port_enabled(struct drm_i915_private *dev_priv,
 			    i915_reg_t adpa_reg, enum pipe *pipe);
 void intel_crt_init(struct drm_i915_private *dev_priv);
-void intel_crt_reset(struct drm_encoder *encoder);
 
 /* intel_ddi.c */
 void intel_ddi_fdi_post_disable(struct intel_encoder *intel_encoder,
drivers/gpu/drm/i915/intel_runtime_pm.c +1 -1
index de3a81034f77..0b3da5818383 100644
@@ -972,7 +972,7 @@ static void vlv_display_power_well_init(struct drm_i915_private *dev_priv)
 	/* Re-enable the ADPA, if we have one */
 	for_each_intel_encoder(&dev_priv->drm, encoder) {
 		if (encoder->type == INTEL_OUTPUT_ANALOG)
-			intel_crt_reset(&encoder->base);
+			encoder->base.funcs->reset(&encoder->base);
 	}
 
 	i915_redisable_vga_power_on(dev_priv);
Signature · 6 lines
2.11.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

✗ Fi.CI.BAT: failure for drm/i915/crt: make intel_crt_reset() static again

== Series Details ==

== Series Details ==

Series: drm/i915/crt: make intel_crt_reset() static again
URL : https://patchwork.freedesktop.org/series/45167/
State : failure

== Summary ==

= CI Bug Log - changes from CI_DRM_4359 -> Patchwork_9382 =

== Summary - FAILURE ==

Serious unknown changes coming with Patchwork_9382 absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_9382, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://patchwork.freedesktop.org/api/1.0/series/45167/revisions/1/mbox/

== Possible new issues ==

Here are the unknown changes that may have been introduced in Patchwork_9382:

=== IGT changes ===

    ==== Possible regressions ====

    igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
      fi-kbl-7560u:       PASS -> INCOMPLETE

== Known issues ==

Here are the changes found in Patchwork_9382 that come from known issues:

=== IGT changes ===

    ==== Warnings ====

    igt@gem_ctx_create@basic-files:
      fi-skl-gvtdvm:      INCOMPLETE (fdo#106988, fdo#105600) -> DMESG-WARN (fdo#106954)

fdo#105600 https://bugs.freedesktop.org/show_bug.cgi?id=105600
fdo#106954 https://bugs.freedesktop.org/show_bug.cgi?id=106954
fdo#106988 https://bugs.freedesktop.org/show_bug.cgi?id=106988

== Participating hosts (42 -> 37) ==

Missing (5): fi-byt-squawks fi-kbl-x1275 fi-ilk-m540 fi-glk-dsi fi-hsw-4200u

== Build changes ==

* Linux: CI_DRM_4359 -> Patchwork_9382

CI_DRM_4359: fe0300c16bff0f9c82050e56cdbc3880f87e39bd @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4527: 04afec3ccfcb35e994f2e78254ff499f6b94f097 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9382: caeefc8eeaf8ad18927a9bd623d3bfe35b0570f2 @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

caeefc8eeaf8 drm/i915/crt: make intel_crt_reset() static again

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9382/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reviewed-by on v1 1/1
#2 lore raw
In reply to Jani Nikula
Quoted 44 lines · Jani Nikula

Commit 9504a8924759 ("drm/i915/vlv: Reset the ADPA in vlv_display_power_well_init()") started calling intel_crt_reset() directly, while we could just as well use the hooks and keep the function static.

Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/intel_crt.c        | 2 +-
 drivers/gpu/drm/i915/intel_drv.h        | 1 -
 drivers/gpu/drm/i915/intel_runtime_pm.c | 2 +-
 3 files changed, 2 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_crt.c +1 -1
index 0c6bf82bb059..c2cb3b7a255b 100644
@@ -881,7 +881,7 @@ static int intel_crt_get_modes(struct drm_connector *connector)
 	return ret;
 }
 
-void intel_crt_reset(struct drm_encoder *encoder)
+static void intel_crt_reset(struct drm_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->dev);
 	struct intel_crt *crt = intel_encoder_to_crt(to_intel_encoder(encoder));
drivers/gpu/drm/i915/intel_drv.h +0 -1
index 0c3ac0eafde0..b2002fee1b58 100644
@@ -1373,7 +1373,6 @@ void gen9_disable_guc_interrupts(struct drm_i915_private *dev_priv);
 bool intel_crt_port_enabled(struct drm_i915_private *dev_priv,
 			    i915_reg_t adpa_reg, enum pipe *pipe);
 void intel_crt_init(struct drm_i915_private *dev_priv);
-void intel_crt_reset(struct drm_encoder *encoder);
 
 /* intel_ddi.c */
 void intel_ddi_fdi_post_disable(struct intel_encoder *intel_encoder,
drivers/gpu/drm/i915/intel_runtime_pm.c +0 -0
index de3a81034f77..0b3da5818383 100644

drivers/gpu/drm/i915/intel_runtime_pm.c static void vlv_display_power_well_init(struct drm_i915_private *dev_priv) · line 975

Quoted 5 lines
drivers/gpu/drm/i915/intel_runtime_pm.c +1 -1
@@ -972,7 +972,7 @@ static void vlv_display_power_well_init(struct drm_i915_private *dev_priv)
 	/* Re-enable the ADPA, if we have one */
 	for_each_intel_encoder(&dev_priv->drm, encoder) {
 		if (encoder->type == INTEL_OUTPUT_ANALOG)
-			intel_crt_reset(&encoder->base);
+			encoder->base.funcs->reset(&encoder->base);

I have a feeling I requested the direct call to make it less annoying to figure out what it's actually calling. But if people prefer the function pointer version I can live with that too.

Quoted 5 lines
drivers/gpu/drm/i915/intel_runtime_pm.c +0 -0
 	}
 
 	i915_redisable_vga_power_on(dev_priv);
Signature · 1 line
2.11.0
Signature · 6 lines
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw
Quoted 38 lines · Ville Syrjälä
Quoted 37 lines · Jani Nikula

Commit 9504a8924759 ("drm/i915/vlv: Reset the ADPA in vlv_display_power_well_init()") started calling intel_crt_reset() directly, while we could just as well use the hooks and keep the function static.

Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/intel_crt.c        | 2 +-
 drivers/gpu/drm/i915/intel_drv.h        | 1 -
 drivers/gpu/drm/i915/intel_runtime_pm.c | 2 +-
 3 files changed, 2 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_crt.c +1 -1
index 0c6bf82bb059..c2cb3b7a255b 100644
@@ -881,7 +881,7 @@ static int intel_crt_get_modes(struct drm_connector *connector)
 	return ret;
 }
 
-void intel_crt_reset(struct drm_encoder *encoder)
+static void intel_crt_reset(struct drm_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->dev);
 	struct intel_crt *crt = intel_encoder_to_crt(to_intel_encoder(encoder));
drivers/gpu/drm/i915/intel_drv.h +0 -1
index 0c3ac0eafde0..b2002fee1b58 100644
@@ -1373,7 +1373,6 @@ void gen9_disable_guc_interrupts(struct drm_i915_private *dev_priv);
 bool intel_crt_port_enabled(struct drm_i915_private *dev_priv,
 			    i915_reg_t adpa_reg, enum pipe *pipe);
 void intel_crt_init(struct drm_i915_private *dev_priv);
-void intel_crt_reset(struct drm_encoder *encoder);
 
Quoted 16 lines

drivers/gpu/drm/i915/intel_runtime_pm.c static void vlv_display_power_well_init(struct drm_i915_private *dev_priv) · line 975

Quoted 12 lines
drivers/gpu/drm/i915/intel_drv.h +0 -0
 /* intel_ddi.c */
 void intel_ddi_fdi_post_disable(struct intel_encoder *intel_encoder,
drivers/gpu/drm/i915/intel_runtime_pm.c +1 -1
index de3a81034f77..0b3da5818383 100644
@@ -972,7 +972,7 @@ static void vlv_display_power_well_init(struct drm_i915_private *dev_priv)
 	/* Re-enable the ADPA, if we have one */
 	for_each_intel_encoder(&dev_priv->drm, encoder) {
 		if (encoder->type == INTEL_OUTPUT_ANALOG)
-			intel_crt_reset(&encoder->base);
+			encoder->base.funcs->reset(&encoder->base);

I have a feeling I requested the direct call to make it less annoying to figure out what it's actually calling. But if people prefer the function pointer version I can live with that too.

True that, but I thought the direct call was a layering violation.

To push, or not to push, that is the question.

BR,
Jani.

Quoted 8 lines
Quoted 5 lines
drivers/gpu/drm/i915/intel_runtime_pm.c +0 -0
 	}
 
 	i915_redisable_vga_power_on(dev_priv);
Signature · 1 line
2.11.0
Signature · 5 lines
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw
Quoted 56 lines · Jani Nikula
Quoted 38 lines · Ville Syrjälä
Quoted 37 lines · Jani Nikula

Commit 9504a8924759 ("drm/i915/vlv: Reset the ADPA in vlv_display_power_well_init()") started calling intel_crt_reset() directly, while we could just as well use the hooks and keep the function static.

Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/intel_crt.c        | 2 +-
 drivers/gpu/drm/i915/intel_drv.h        | 1 -
 drivers/gpu/drm/i915/intel_runtime_pm.c | 2 +-
 3 files changed, 2 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_crt.c +1 -1
index 0c6bf82bb059..c2cb3b7a255b 100644
@@ -881,7 +881,7 @@ static int intel_crt_get_modes(struct drm_connector *connector)
 	return ret;
 }
 
-void intel_crt_reset(struct drm_encoder *encoder)
+static void intel_crt_reset(struct drm_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->dev);
 	struct intel_crt *crt = intel_encoder_to_crt(to_intel_encoder(encoder));
drivers/gpu/drm/i915/intel_drv.h +0 -1
index 0c3ac0eafde0..b2002fee1b58 100644
@@ -1373,7 +1373,6 @@ void gen9_disable_guc_interrupts(struct drm_i915_private *dev_priv);
 bool intel_crt_port_enabled(struct drm_i915_private *dev_priv,
 			    i915_reg_t adpa_reg, enum pipe *pipe);
 void intel_crt_init(struct drm_i915_private *dev_priv);
-void intel_crt_reset(struct drm_encoder *encoder);
 
Quoted 16 lines

drivers/gpu/drm/i915/intel_runtime_pm.c static void vlv_display_power_well_init(struct drm_i915_private *dev_priv) · line 975

Quoted 12 lines
drivers/gpu/drm/i915/intel_drv.h +0 -0
 /* intel_ddi.c */
 void intel_ddi_fdi_post_disable(struct intel_encoder *intel_encoder,
drivers/gpu/drm/i915/intel_runtime_pm.c +1 -1
index de3a81034f77..0b3da5818383 100644
@@ -972,7 +972,7 @@ static void vlv_display_power_well_init(struct drm_i915_private *dev_priv)
 	/* Re-enable the ADPA, if we have one */
 	for_each_intel_encoder(&dev_priv->drm, encoder) {
 		if (encoder->type == INTEL_OUTPUT_ANALOG)
-			intel_crt_reset(&encoder->base);
+			encoder->base.funcs->reset(&encoder->base);

I have a feeling I requested the direct call to make it less annoying to figure out what it's actually calling. But if people prefer the function pointer version I can live with that too.

Quoted 3 lines

True that, but I thought the direct call was a layering violation.

To push, or not to push, that is the question.

Lemma pile my bikeshed on top: Given that we specifically filter for the CRT encoder I think a direct call is better here, since a bit more clear what's going on. hw occasionally encouragse layering violations ... -Daniel

Quoted 19 lines

BR,
Jani.

Quoted 8 lines
Quoted 5 lines
drivers/gpu/drm/i915/intel_runtime_pm.c +0 -0
 	}
 
 	i915_redisable_vga_power_on(dev_priv);
Signature · 1 line
2.11.0
Signature · 5 lines
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw
Quoted 57 lines · Daniel Vetter
Quoted 56 lines · Jani Nikula
Quoted 54 lines · Ville Syrjälä
Quoted 44 lines · Jani Nikula

Commit 9504a8924759 ("drm/i915/vlv: Reset the ADPA in vlv_display_power_well_init()") started calling intel_crt_reset() directly, while we could just as well use the hooks and keep the function static.

Cc Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/intel_crt.c        | 2 +-
 drivers/gpu/drm/i915/intel_drv.h        | 1 -
 drivers/gpu/drm/i915/intel_runtime_pm.c | 2 +-
 3 files changed, 2 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_crt.c +1 -1
index 0c6bf82bb059..c2cb3b7a255b 100644
@@ -881,7 +881,7 @@ static int intel_crt_get_modes(struct drm_connector *connector)
 	return ret;
 }
 
-void intel_crt_reset(struct drm_encoder *encoder)
+static void intel_crt_reset(struct drm_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->dev);
 	struct intel_crt *crt = intel_encoder_to_crt(to_intel_encoder(encoder));
drivers/gpu/drm/i915/intel_drv.h +0 -1
index 0c3ac0eafde0..b2002fee1b58 100644
@@ -1373,7 +1373,6 @@ void gen9_disable_guc_interrupts(struct drm_i915_private *dev_priv);
 bool intel_crt_port_enabled(struct drm_i915_private *dev_priv,
 			    i915_reg_t adpa_reg, enum pipe *pipe);
 void intel_crt_init(struct drm_i915_private *dev_priv);
-void intel_crt_reset(struct drm_encoder *encoder);
 
 /* intel_ddi.c */
 void intel_ddi_fdi_post_disable(struct intel_encoder *intel_encoder,
drivers/gpu/drm/i915/intel_runtime_pm.c +0 -0
index de3a81034f77..0b3da5818383 100644

drivers/gpu/drm/i915/intel_runtime_pm.c static void vlv_display_power_well_init(struct drm_i915_private *dev_priv) · line 975

Quoted 5 lines
drivers/gpu/drm/i915/intel_runtime_pm.c +1 -1
@@ -972,7 +972,7 @@ static void vlv_display_power_well_init(struct drm_i915_private *dev_priv)
 	/* Re-enable the ADPA, if we have one */
 	for_each_intel_encoder(&dev_priv->drm, encoder) {
 		if (encoder->type == INTEL_OUTPUT_ANALOG)
-			intel_crt_reset(&encoder->base);
+			encoder->base.funcs->reset(&encoder->base);

I have a feeling I requested the direct call to make it less annoying to figure out what it's actually calling. But if people prefer the function pointer version I can live with that too.

Quoted 7 lines
Quoted 3 lines

True that, but I thought the direct call was a layering violation.

To push, or not to push, that is the question.

Lemma pile my bikeshed on top: Given that we specifically filter for the CRT encoder I think a direct call is better here, since a bit more clear what's going on. hw occasionally encouragse layering violations ...

Okay, I'll drop the patch for now.

BR,
Jani.

Quoted 21 lines

-Daniel

Quoted 19 lines

BR,
Jani.

Quoted 8 lines
Quoted 5 lines
drivers/gpu/drm/i915/intel_runtime_pm.c +0 -0
 	}
 
 	i915_redisable_vga_power_on(dev_priv);
Signature · 1 line
2.11.0
Signature · 5 lines
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 5 lines
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw

✓ Fi.CI.BAT: success for drm/i915/crt: make intel_crt_reset() static again

In reply to Jani Nikula
== Series Details ==

== Series Details ==

Series: drm/i915/crt: make intel_crt_reset() static again
URL : https://patchwork.freedesktop.org/series/45167/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_4372 -> Patchwork_9408 =

== Summary - SUCCESS ==

No regressions found.

External URL: https://patchwork.freedesktop.org/api/1.0/series/45167/revisions/1/mbox/

== Changes ==

No changes found

== Participating hosts (41 -> 36) ==

Additional (2): fi-bxt-dsi fi-snb-2520m
Missing (7): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-glk-dsi fi-bsw-cyan fi-ctg-p8600 fi-kbl-x1275

== Build changes ==

* Linux: CI_DRM_4372 -> Patchwork_9408

CI_DRM_4372: d4ce215cacf172e6b8f1424d3750ea116c3c4abe @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4529: 23d50a49413aff619d00ec50fc2e051e9b45baa5 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9408: 72abddeed6c5b783387862b60ef83854d44d2690 @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

72abddeed6c5 drm/i915/crt: make intel_crt_reset() static again

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9408/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#7 lore raw

✓ Fi.CI.IGT: success for drm/i915/crt: make intel_crt_reset() static again

In reply to Jani Nikula
== Series Details ==

== Series Details ==

Series: drm/i915/crt: make intel_crt_reset() static again
URL : https://patchwork.freedesktop.org/series/45167/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_4372_full -> Patchwork_9408_full =

== Summary - WARNING ==

Minor unknown changes coming with Patchwork_9408_full need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_9408_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

== Possible new issues ==

Here are the unknown changes that may have been introduced in Patchwork_9408_full:

=== IGT changes ===

    ==== Warnings ====

    igt@gem_exec_schedule@deep-blt:
      shard-kbl:          SKIP -> PASS

    igt@gem_mocs_settings@mocs-rc6-bsd1:
      shard-kbl:          PASS -> SKIP +1

    igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-spr-indfb-draw-mmap-cpu:
      shard-hsw:          PASS -> SKIP

== Known issues ==

Here are the changes found in Patchwork_9408_full that come from known issues:

=== IGT changes ===

    ==== Issues hit ====

    igt@drv_selftest@live_gtt:
      shard-glk:          PASS -> INCOMPLETE (fdo#103359, k.org#198133) +1

    igt@kms_cursor_legacy@cursor-vs-flip-toggle:
      shard-hsw:          PASS -> FAIL (fdo#103355)

    igt@kms_flip@dpms-vs-vblank-race-interruptible:
      shard-hsw:          PASS -> FAIL (fdo#103060)

    igt@kms_flip@flip-vs-expired-vblank:
      shard-hsw:          PASS -> FAIL (fdo#102887, fdo#105363)

    igt@kms_flip_tiling@flip-to-y-tiled:
      shard-glk:          PASS -> FAIL (fdo#104724) +1

    igt@kms_flip_tiling@flip-x-tiled:
      shard-glk:          PASS -> FAIL (fdo#104724, fdo#103822)

    igt@kms_setmode@basic:
      shard-kbl:          PASS -> FAIL (fdo#99912)

    igt@perf_pmu@idle-no-semaphores-rcs0:
      shard-snb:          NOTRUN -> INCOMPLETE (fdo#105411)

    
    ==== Possible fixes ====

    igt@drv_selftest@live_hangcheck:
      shard-kbl:          DMESG-FAIL (fdo#106947, fdo#106560) -> PASS

    igt@gem_exec_params@rs-invalid-on-bsd-ring:
      shard-snb:          INCOMPLETE (fdo#105411) -> SKIP

    igt@kms_cursor_legacy@2x-nonblocking-modeset-vs-cursor-atomic:
      shard-glk:          FAIL (fdo#106509, fdo#105454) -> PASS

    igt@kms_flip@2x-plain-flip-fb-recreate:
      shard-hsw:          FAIL (fdo#100368) -> PASS

    igt@kms_flip@flip-vs-expired-vblank:
      shard-apl:          FAIL (fdo#102887, fdo#105363) -> PASS

    igt@kms_flip@plain-flip-fb-recreate:
      shard-glk:          FAIL (fdo#100368) -> PASS

fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#103355 https://bugs.freedesktop.org/show_bug.cgi?id=103355
fdo#103359 https://bugs.freedesktop.org/show_bug.cgi?id=103359
fdo#103822 https://bugs.freedesktop.org/show_bug.cgi?id=103822
fdo#104724 https://bugs.freedesktop.org/show_bug.cgi?id=104724
fdo#105363 https://bugs.freedesktop.org/show_bug.cgi?id=105363
fdo#105411 https://bugs.freedesktop.org/show_bug.cgi?id=105411
fdo#105454 https://bugs.freedesktop.org/show_bug.cgi?id=105454
fdo#106509 https://bugs.freedesktop.org/show_bug.cgi?id=106509
fdo#106560 https://bugs.freedesktop.org/show_bug.cgi?id=106560
fdo#106947 https://bugs.freedesktop.org/show_bug.cgi?id=106947
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
k.org#198133 https://bugzilla.kernel.org/show_bug.cgi?id=198133

== Participating hosts (5 -> 5) ==

No changes in participating hosts

== Build changes ==

* Linux: CI_DRM_4372 -> Patchwork_9408

CI_DRM_4372: d4ce215cacf172e6b8f1424d3750ea116c3c4abe @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4529: 23d50a49413aff619d00ec50fc2e051e9b45baa5 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9408: 72abddeed6c5b783387862b60ef83854d44d2690 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9408/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx