Skip to contentSkip to conversation

ndctl, test: add a new unit test for monitor

PATCH In review QI Fuli 2 participants 4 messages Jul 10, 2018 libnvdimm: non-volatile memory device

lore
Share & tools
lore

QI Fuli

author
#0 lore raw

PATCH v4 1/1 ndctl, test: add a new unit test for monitor

Add a new unit test to test the following options of the monitor command.
--dimm
--bus
--region
--namespace
--logfile
--config-file

---
v3 -> v4:
Add list-smart-dimm() helper to list and filter smart supported dimms
v2 -> v3:
- Add filter_obj instead of hard-coded values
v1 -> v2:
- Add init()
- Add get_filter_dimm() to get the filter dimms by ndctl list command instead of hard-cording
- Add sleep to call_notify()

 .gitignore             |   1 +
 test/Makefile.am       |  14 +++-
 test/list-smart-dimm.c | 117 +++++++++++++++++++++++++++++++++
 test/monitor.sh        | 146 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 276 insertions(+), 2 deletions(-)
 create mode 100644 test/list-smart-dimm.c
 create mode 100755 test/monitor.sh
.gitignore +1 -0
index 1016b3b..0baace4 100644
@@ -56,3 +56,4 @@ test/smart-notify
 test/fio.job
 test/local-write-0-verify.state
 test/ack-shutdown-count-set
+test/list-smart-dimm
test/Makefile.am +12 -2
index cd451e9..8c55056 100644
@@ -21,7 +21,8 @@ TESTS =\
 	btt-pad-compat.sh \
 	firmware-update.sh \
 	ack-shutdown-count-set \
-	rescan-partitions.sh
+	rescan-partitions.sh \
+	monitor.sh
 
 check_PROGRAMS =\
 	libndctl \
@@ -34,7 +35,8 @@ check_PROGRAMS =\
 	smart-listen \
 	hugetlb \
 	daxdev-errors \
-	ack-shutdown-count-set
+	ack-shutdown-count-set \
+	list-smart-dimm
 
 if ENABLE_DESTRUCTIVE
 TESTS +=\
@@ -151,3 +153,11 @@ multi_pmem_LDADD = \
 		$(UUID_LIBS) \
 		$(KMOD_LIBS) \
 		../libutil.a
+
+list_smart_dimm_SOURCES = \
+		list-smart-dimm.c \
+		../util/json.c
+list_smart_dimm_LDADD = \
+		$(LIBNDCTL_LIB) \
+		$(JSON_LIBS) \
+		../libutil.a
test/list-smart-dimm.c new file +117 -0

117 lines not on this page · raw message

test/monitor.sh new file +146 -0

146 lines not on this page · raw message

Signature · 7 lines
2.18.0


_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm
#1 lore raw

Hi Qi

Thank you for creating the v4 test, but unfortunately the test has failed...

Quoted 300 lines · QI Fuli

Add a new unit test to test the following options of the monitor command.
--dimm
--bus
--region
--namespace
--logfile
--config-file

---
v3 -> v4:
Add list-smart-dimm() helper to list and filter smart supported dimms
v2 -> v3:
- Add filter_obj instead of hard-coded values
v1 -> v2:
- Add init()
- Add get_filter_dimm() to get the filter dimms by ndctl list command instead of hard-cording
- Add sleep to call_notify()

 .gitignore             |   1 +
 test/Makefile.am       |  14 +++-
 test/list-smart-dimm.c | 117 +++++++++++++++++++++++++++++++++
 test/monitor.sh        | 146 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 276 insertions(+), 2 deletions(-)
 create mode 100644 test/list-smart-dimm.c
 create mode 100755 test/monitor.sh
.gitignore +1 -0
index 1016b3b..0baace4 100644
@@ -56,3 +56,4 @@ test/smart-notify
 test/fio.job
 test/local-write-0-verify.state
 test/ack-shutdown-count-set
+test/list-smart-dimm
test/Makefile.am +12 -2
index cd451e9..8c55056 100644
@@ -21,7 +21,8 @@ TESTS =\
 	btt-pad-compat.sh \
 	firmware-update.sh \
 	ack-shutdown-count-set \
-	rescan-partitions.sh
+	rescan-partitions.sh \
+	monitor.sh
 
 check_PROGRAMS =\
 	libndctl \
@@ -34,7 +35,8 @@ check_PROGRAMS =\
 	smart-listen \
 	hugetlb \
 	daxdev-errors \
-	ack-shutdown-count-set
+	ack-shutdown-count-set \
+	list-smart-dimm
 
 if ENABLE_DESTRUCTIVE
 TESTS +=\
@@ -151,3 +153,11 @@ multi_pmem_LDADD = \
 		$(UUID_LIBS) \
 		$(KMOD_LIBS) \
 		../libutil.a
+
+list_smart_dimm_SOURCES = \
+		list-smart-dimm.c \
+		../util/json.c
+list_smart_dimm_LDADD = \
+		$(LIBNDCTL_LIB) \
+		$(JSON_LIBS) \
+		../libutil.a
test/list-smart-dimm.c new file +117 -0
new file mode 100644
index 0000000..c9982d5
@@ -0,0 +1,117 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 2018, FUJITSU LIMITED. All rights reserved. */
+
+#include <stdio.h>
+#include <errno.h>
+#include <util/json.h>
+#include <util/filter.h>
+#include <json-c/json.h>
+#include <ndctl/libndctl.h>
+#include <util/parse-options.h>
+#include <ndctl.h>
+
+struct util_filter_params param;
+static int did_fail;
+static int jflag = JSON_C_TO_STRING_PRETTY;
+
+#define fail(fmt, ...) \
+do { \
+	did_fail = 1; \
+	fprintf(stderr, "ndctl-%s:%s:%d: " fmt, \
+			VERSION, __func__, __LINE__, ##__VA_ARGS__); \
+} while (0)
+
+static bool filter_region(struct ndctl_region *region,
+		struct util_filter_ctx *ctx)
+{
+	return true;
+}
+
+static void filter_dimm(struct ndctl_dimm *dimm, struct util_filter_ctx *ctx)
+{
+	struct list_filter_arg *lfa = ctx->list;
+	struct json_object *jdimm;
+
+	if (!ndctl_dimm_is_cmd_supported(dimm, ND_CMD_SMART))
+		return;
+	if (!ndctl_dimm_is_cmd_supported(dimm, ND_CMD_SMART_THRESHOLD))
+		return;
+	if (!ndctl_dimm_is_flag_supported(dimm, ND_SMART_ALARM_VALID))
+		return;
+
+	if (!lfa->jdimms) {
+		lfa->jdimms = json_object_new_array();
+		if (!lfa->jdimms) {
+			fail("\n");
+			return;
+		}
+	}
+
+	jdimm = util_dimm_to_json(dimm, lfa->flags);
+	if (!jdimm) {
+		fail("\n");
+		return;
+	}
+
+	json_object_array_add(lfa->jdimms, jdimm);
+}
+
+static bool filter_bus(struct ndctl_bus *bus, struct util_filter_ctx *ctx)
+{
+	return true;
+}
+
+static int list_display(struct list_filter_arg *lfa)
+{
+	struct json_object *jdimms = lfa->jdimms;
+
+	if (jdimms)
+		util_display_json_array(stdout, jdimms, jflag);
+	return 0;
+}
+
+int main(int argc, const char *argv[])
+{
+	struct ndctl_ctx *ctx;
+	int i, rc;
+	const struct option options[] = {
+		OPT_STRING('b', "bus", &param.bus, "bus-id", "filter by bus"),
+		OPT_STRING('r', "region", &param.region, "region-id",
+				"filter by region"),
+		OPT_STRING('d', "dimm", &param.dimm, "dimm-id",
+				"filter by dimm"),
+		OPT_STRING('n', "namespace", &param.namespace, "namespace-id",
+				"filter by namespace id"),
+		OPT_END(),
+	};
+	const char * const u[] = {
+		"list-smart-dimm [<options>]",
+		NULL
+	};
+	struct util_filter_ctx fctx = { 0 };
+	struct list_filter_arg lfa = { 0 };
+
+	rc = ndctl_new(&ctx);
+	if (rc < 0)
+		return EXIT_FAILURE;
+        argc = parse_options(argc, argv, options, u, 0);
+	for (i = 0; i < argc; i++)
+		error("unknown parameter \"%s\"\n", argv[i]);
+	if (argc)
+		usage_with_options(u, options);
+
+	fctx.filter_bus = filter_bus;
+	fctx.filter_dimm = filter_dimm;
+	fctx.filter_region = filter_region;
+	fctx.filter_namespace = NULL;
+	fctx.list = &lfa;
+	lfa.flags = 0;
+
+	rc = util_filter_walk(ctx, &fctx, &param);
+	if (rc)
+		return rc;
+
+	if (list_display(&lfa) || did_fail)
+		return -ENOMEM;
+	return 0;
+}
test/monitor.sh new file +97 -0
new file mode 100755
index 0000000..1401983
@@ -0,0 +1,146 @@
+#!/bin/bash -Ex
+
+# SPDX-License-Identifier: GPL-2.0
+# Copyright(c) 2018, FUJITSU LIMITED. All rights reserved.
+
+rc=77
+logfile=""
+conf_file=""
+monitor_dimms=""
+monitor_regions=""
+monitor_namespace=""
+monitor_pid=65536
+
+. ./common
+
+trap 'err $LINENO' ERR
+
+check_min_kver "4.15" || do_skip "kernel $KVER may not support monitor service"
+
+start_monitor()
+{
+	logfile=$(mktemp)
+	$NDCTL monitor -l $logfile $1 &
+	monitor_pid=$!
+	truncate --size 0 $logfile #remove startup log
+}
+
+get_monitor_dimm()
+{
+	jlist=$(./list-smart-dimm -b $smart_supported_bus $1)
+	monitor_dimms=$(jq '.[]."dev"?, ."dev"?' <<<$jlist | sort | uniq | xargs)
+}
+
+call_notify()
+{
+	./smart-notify $smart_supported_bus
+	sync; sleep 3
+}
+
+check_result()
+{
+	jlog=$(cat $logfile)
+	notify_dimms=$(jq ."dimm"."dev" <<<$jlog | sort | uniq | xargs)
+	[[ $monitor_dimms == $notify_dimms ]]
+}
+
+stop_monitor()
+{
+	kill $monitor_pid
+	rm $logfile
+}
+
+create_conf_file()
+{
+	conf_file=$(mktemp)
+	echo "dimm = $1" > $conf_file
+}
+
+test_filter_dimm()
+{
+	smart_supported_bus=$NFIT_TEST_BUS0
+	monitor_dimms=$(./list-smart-dimm -b $smart_supported_bus | jq -r .[0].dev)
+	if [ -z $monitor_dimms ]; then
+		smart_supported_bus=$NFIT_TEST_BUS1
+		monitor_dimms=$(./list-smart-dimm -b $smart_supported_bus | jq -r .[0].dev)
+	fi
+	start_monitor "-d $monitor_dimms"
+	call_notify
+	check_result
+	stop_monitor
+}
+
+test_filter_bus()
+{
+	monitor_dimms=""
+	get_monitor_dimm
+	start_monitor "-b $smart_supported_bus"
+	call_notify
+	check_result
+	stop_monitor
+}
+
+test_filter_region()
+{
+	monitor_dimms=""
+	monitor_region=""
+	count=$($NDCTL list -R -b $smart_supported_bus | jq -r .[].dev | wc -l)
+	i=0
+	while [ $i -lt $count ]; do
+		monitor_region=$($NDCTL list -R -b $smart_supported_bus | jq -r .[$i].dev)
+		get_monitor_dimm "-r $monitor_region"
+		[ ! -z $monitor_dimms ] && break
+		i=$[$i+1]
+	done
+	start_monitor "-r $monitor_region"
+	call_notify
+	check_result

test/monitor.sh line 106

Quoted 10 lines
test/monitor.sh new file +9 -0
+	stop_monitor
+}
+
+test_filter_namespace()
+{
+	monitor_dimms=""
 
+	monitor_namespace=$($NDCTL list -N -b $smart_supported_bus | jq -r .[0].dev)
+	[ -z $monitor_namespace ] && monitor_namespace="namespace1.0"
+	$NDCTL create-namespace -b $smart_supported_bus -n $monitor_namespace

namespace1.0 may be used by the other bus. Actually my test failed because namespace1.0 was used by the other bus.
How about the following instead?

-       monitor_namespace=$($NDCTL list -N -b $smart_supported_bus | jq -r .[0].dev)
-       [ -z $monitor_namespace ] && monitor_namespace="namespace1.0"
-       $NDCTL create-namespace -b $smart_supported_bus -n $monitor_namespace
+       init
+       monitor_namespace=$($NDCTL create-namespace -b $smart_supported_bus | jq -r .dev)

Thanks,
Masa

Quoted 31 lines
test/monitor.sh new file +30 -0
+	get_monitor_dimm "-n $monitor_namespace"
+	start_monitor "-n $monitor_namespace"
+	call_notify
+	check_result
+	stop_monitor
+	$NDCTL destroy-namespace $monitor_namespace -f
+}
+
+test_conf_file()
+{
+	create_conf_file  "$monitor_dimms"
+	start_monitor "-c $conf_file"
+	call_notify
+	check_result
+	stop_monitor
+	rm $conf_file
+}
+
+do_tests()
+{
+	test_filter_dimm
+	test_filter_bus
+	test_filter_region
+	test_filter_namespace
+	test_conf_file
+}
+
+init()
+{
+	$NDCTL disable-region -b $NFIT_TEST_BUS0 all

test/monitor.sh line 146

Quoted 10 lines
test/monitor.sh new file +10 -0
+	$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
+	$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+}
+
+modprobe nfit_test
+rc=1
+init
+do_tests
+_cleanup
+exit 0

_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm

author
#2 lore raw
Quoted 322 lines

-----Original Message-----
From: Masayoshi Mizuma [mailto:[email protected]]
Sent: Wednesday, July 11, 2018 12:11 AM
To: Qi, Fuli/斉 福利 <[email protected]>; [email protected]
Subject: Re: [ndctl PATCH v4] ndctl, test: add a new unit test for monitor

Hi Qi

Thank you for creating the v4 test, but unfortunately the test has failed...

Quoted 250 lines · QI Fuli

Add a new unit test to test the following options of the monitor command.
--dimm
--bus
--region
--namespace
--logfile
--config-file

---
v3 -> v4:
Add list-smart-dimm() helper to list and filter smart supported
dimms
v2 -> v3:
- Add filter_obj instead of hard-coded values
v1 -> v2:
- Add init()
- Add get_filter_dimm() to get the filter dimms by ndctl list command instead of hard-cording
- Add sleep to call_notify()

 .gitignore             |   1 +
 test/Makefile.am       |  14 +++-
 test/list-smart-dimm.c | 117 +++++++++++++++++++++++++++++++++
 test/monitor.sh        | 146 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 276 insertions(+), 2 deletions(-)  create mode

100644 test/list-smart-dimm.c create mode 100755 test/monitor.sh

.gitignore +1 -0
index 1016b3b..0baace4 100644
@@ -56,3 +56,4 @@ test/smart-notify
 test/fio.job
 test/local-write-0-verify.state
 test/ack-shutdown-count-set
+test/list-smart-dimm
test/Makefile.am index renamed from test/Makefile.am +0 -0

cd451e9..8c55056 100644

test/Makefile.am +12 -2
@@ -21,7 +21,8 @@ TESTS =\
 	btt-pad-compat.sh \
 	firmware-update.sh \
 	ack-shutdown-count-set \
-	rescan-partitions.sh
+	rescan-partitions.sh \
+	monitor.sh
 
 check_PROGRAMS =\
 	libndctl \
@@ -34,7 +35,8 @@ check_PROGRAMS =\
 	smart-listen \
 	hugetlb \
 	daxdev-errors \
-	ack-shutdown-count-set
+	ack-shutdown-count-set \
+	list-smart-dimm
 
 if ENABLE_DESTRUCTIVE
 TESTS +=\
@@ -151,3 +153,11 @@ multi_pmem_LDADD = \
 		$(UUID_LIBS) \
 		$(KMOD_LIBS) \
 		../libutil.a
+
+list_smart_dimm_SOURCES = \
+		list-smart-dimm.c \
+		../util/json.c
+list_smart_dimm_LDADD = \
+		$(LIBNDCTL_LIB) \
+		$(JSON_LIBS) \
+		../libutil.a
test/list-smart-dimm.c new file renamed from test/list-smart-dimm.c +0 -0

mode 100644 index 0000000..c9982d5

test/list-smart-dimm.c new file +113 -0
@@ -0,0 +1,117 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 2018, FUJITSU LIMITED. All rights reserved. */
+
+#include <stdio.h>
+#include <errno.h>
+#include <util/json.h>
+#include <util/filter.h>
+#include <json-c/json.h>
+#include <ndctl/libndctl.h>
+#include <util/parse-options.h>
+#include <ndctl.h>
+
+struct util_filter_params param;
+static int did_fail;
+static int jflag = JSON_C_TO_STRING_PRETTY;
+
+#define fail(fmt, ...) \
+do { \
+	did_fail = 1; \
+	fprintf(stderr, "ndctl-%s:%s:%d: " fmt, \
+			VERSION, __func__, __LINE__, ##__VA_ARGS__); \ } while (0)
+
+static bool filter_region(struct ndctl_region *region,
+		struct util_filter_ctx *ctx)
+{
+	return true;
+}
+
+static void filter_dimm(struct ndctl_dimm *dimm, struct
+util_filter_ctx *ctx) {
+	struct list_filter_arg *lfa = ctx->list;
+	struct json_object *jdimm;
+
+	if (!ndctl_dimm_is_cmd_supported(dimm, ND_CMD_SMART))
+		return;
+	if (!ndctl_dimm_is_cmd_supported(dimm, ND_CMD_SMART_THRESHOLD))
+		return;
+	if (!ndctl_dimm_is_flag_supported(dimm, ND_SMART_ALARM_VALID))
+		return;
+
+	if (!lfa->jdimms) {
+		lfa->jdimms = json_object_new_array();
+		if (!lfa->jdimms) {
+			fail("\n");
+			return;
+		}
+	}
+
+	jdimm = util_dimm_to_json(dimm, lfa->flags);
+	if (!jdimm) {
+		fail("\n");
+		return;
+	}
+
+	json_object_array_add(lfa->jdimms, jdimm); }
+
+static bool filter_bus(struct ndctl_bus *bus, struct util_filter_ctx
+*ctx) {
+	return true;
+}
+
+static int list_display(struct list_filter_arg *lfa) {
+	struct json_object *jdimms = lfa->jdimms;
+
+	if (jdimms)
+		util_display_json_array(stdout, jdimms, jflag);
+	return 0;
+}
+
+int main(int argc, const char *argv[]) {
+	struct ndctl_ctx *ctx;
+	int i, rc;
+	const struct option options[] = {
+		OPT_STRING('b', "bus", &param.bus, "bus-id", "filter by bus"),
+		OPT_STRING('r', "region", &param.region, "region-id",
+				"filter by region"),
+		OPT_STRING('d', "dimm", &param.dimm, "dimm-id",
+				"filter by dimm"),
+		OPT_STRING('n', "namespace", &param.namespace, "namespace-id",
+				"filter by namespace id"),
+		OPT_END(),
+	};
+	const char * const u[] = {
+		"list-smart-dimm [<options>]",
+		NULL
+	};
+	struct util_filter_ctx fctx = { 0 };
+	struct list_filter_arg lfa = { 0 };
+
+	rc = ndctl_new(&ctx);
+	if (rc < 0)
+		return EXIT_FAILURE;
+        argc = parse_options(argc, argv, options, u, 0);
+	for (i = 0; i < argc; i++)
+		error("unknown parameter \"%s\"\n", argv[i]);
+	if (argc)
+		usage_with_options(u, options);
+
+	fctx.filter_bus = filter_bus;
+	fctx.filter_dimm = filter_dimm;
+	fctx.filter_region = filter_region;
+	fctx.filter_namespace = NULL;
+	fctx.list = &lfa;
+	lfa.flags = 0;
+
+	rc = util_filter_walk(ctx, &fctx, &param);
+	if (rc)
+		return rc;
+
+	if (list_display(&lfa) || did_fail)
+		return -ENOMEM;
+	return 0;
+}
test/monitor.sh new file +53 -0
index 0000000..1401983
@@ -0,0 +1,146 @@
+#!/bin/bash -Ex
+
+# SPDX-License-Identifier: GPL-2.0
+# Copyright(c) 2018, FUJITSU LIMITED. All rights reserved.
+
+rc=77
+logfile=""
+conf_file=""
+monitor_dimms=""
+monitor_regions=""
+monitor_namespace=""
+monitor_pid=65536
+
+. ./common
+
+trap 'err $LINENO' ERR
+
+check_min_kver "4.15" || do_skip "kernel $KVER may not support monitor service"
+
+start_monitor()
+{
+	logfile=$(mktemp)
+	$NDCTL monitor -l $logfile $1 &
+	monitor_pid=$!
+	truncate --size 0 $logfile #remove startup log }
+
+get_monitor_dimm()
+{
+	jlist=$(./list-smart-dimm -b $smart_supported_bus $1)
+	monitor_dimms=$(jq '.[]."dev"?, ."dev"?' <<<$jlist | sort | uniq |
+xargs) }
+
+call_notify()
+{
+	./smart-notify $smart_supported_bus
+	sync; sleep 3
+}
+
+check_result()
+{
+	jlog=$(cat $logfile)
+	notify_dimms=$(jq ."dimm"."dev" <<<$jlog | sort | uniq | xargs)
+	[[ $monitor_dimms == $notify_dimms ]] }
+
+stop_monitor()
+{
+	kill $monitor_pid
+	rm $logfile
+}
+
+create_conf_file()
+{
+	conf_file=$(mktemp)

test/monitor.sh line 63

Quoted 10 lines
test/monitor.sh new file +10 -0
+	echo "dimm = $1" > $conf_file
+}
+
+test_filter_dimm()
+{
+	smart_supported_bus=$NFIT_TEST_BUS0
+	monitor_dimms=$(./list-smart-dimm -b $smart_supported_bus | jq -r .[0].dev)
+	if [ -z $monitor_dimms ]; then
+		smart_supported_bus=$NFIT_TEST_BUS1
+		monitor_dimms=$(./list-smart-dimm -b $smart_supported_bus | jq

-r .[0].dev)

Quoted 15 lines
test/monitor.sh new file +15 -0
+	fi
+	start_monitor "-d $monitor_dimms"
+	call_notify
+	check_result
+	stop_monitor
+}
+
+test_filter_bus()
+{
+	monitor_dimms=""
+	get_monitor_dimm
+	start_monitor "-b $smart_supported_bus"
+	call_notify
+	check_result
+	stop_monitor

test/monitor.sh

Quoted 10 lines
test/monitor.sh new file +10 -0
+}
+
+test_filter_region()
+{
+	monitor_dimms=""
+	monitor_region=""
+	count=$($NDCTL list -R -b $smart_supported_bus | jq -r .[].dev | wc -l)
+	i=0
+	while [ $i -lt $count ]; do
+		monitor_region=$($NDCTL list -R -b $smart_supported_bus | jq

-r .[$i].dev)

Quoted 8 lines
test/monitor.sh new file +8 -0
+		get_monitor_dimm "-r $monitor_region"
+		[ ! -z $monitor_dimms ] && break
+		i=$[$i+1]
+	done
+	start_monitor "-r $monitor_region"
+	call_notify
+	check_result
+	stop_monitor

test/monitor.sh

Quoted 10 lines
test/monitor.sh new file +9 -0
+}
+
+test_filter_namespace()
+{
+	monitor_dimms=""
 
+	monitor_namespace=$($NDCTL list -N -b $smart_supported_bus | jq -r .[0].dev)
+	[ -z $monitor_namespace ] && monitor_namespace="namespace1.0"
+	$NDCTL create-namespace -b $smart_supported_bus -n
+$monitor_namespace

namespace1.0 may be used by the other bus. Actually my test failed because namespace1.0 was used by the other bus.
How about the following instead?

Review

Quoted 7 lines
(quoted diff) +3 -4
-       monitor_namespace=$($NDCTL list -N -b $smart_supported_bus | jq
-r .[0].dev)
-       [ -z $monitor_namespace ] && monitor_namespace="namespace1.0"
-       $NDCTL create-namespace -b $smart_supported_bus -n $monitor_namespace
+       init
+       monitor_namespace=$($NDCTL create-namespace -b
+ $smart_supported_bus | jq -r .dev)

Hi Masa,

Thank you very much for your comments.

Yes, this is a bug.
I will fix it.

Thanks,
QI

_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm

#3 lore raw
In reply to QI Fuli
Quoted 7 lines · QI Fuli

Add a new unit test to test the following options of the monitor command.
--dimm
--bus
--region
--namespace
--logfile
--config-file

Why don't you add '-D' option test? Like as:

test_filter_dimmevent()
{
get_monitor_dimm
monitor_dimms="$(echo $monitor_dimms | awk '{print $1}')" start_monitor "-d $monitor_dimms -D dimm-unclean-shutdown" $NDCTL inject-smart -U $monitor_dimms check_result
stop_monitor
}

Thanks,
Masa

Quoted 333 lines

---
v3 -> v4:
Add list-smart-dimm() helper to list and filter smart supported dimms
v2 -> v3:
- Add filter_obj instead of hard-coded values
v1 -> v2:
- Add init()
- Add get_filter_dimm() to get the filter dimms by ndctl list command instead of hard-cording
- Add sleep to call_notify()

 .gitignore             |   1 +
 test/Makefile.am       |  14 +++-
 test/list-smart-dimm.c | 117 +++++++++++++++++++++++++++++++++
 test/monitor.sh        | 146 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 276 insertions(+), 2 deletions(-)
 create mode 100644 test/list-smart-dimm.c
 create mode 100755 test/monitor.sh
.gitignore +1 -0
index 1016b3b..0baace4 100644
@@ -56,3 +56,4 @@ test/smart-notify
 test/fio.job
 test/local-write-0-verify.state
 test/ack-shutdown-count-set
+test/list-smart-dimm
test/Makefile.am +12 -2
index cd451e9..8c55056 100644
@@ -21,7 +21,8 @@ TESTS =\
 	btt-pad-compat.sh \
 	firmware-update.sh \
 	ack-shutdown-count-set \
-	rescan-partitions.sh
+	rescan-partitions.sh \
+	monitor.sh
 
 check_PROGRAMS =\
 	libndctl \
@@ -34,7 +35,8 @@ check_PROGRAMS =\
 	smart-listen \
 	hugetlb \
 	daxdev-errors \
-	ack-shutdown-count-set
+	ack-shutdown-count-set \
+	list-smart-dimm
 
 if ENABLE_DESTRUCTIVE
 TESTS +=\
@@ -151,3 +153,11 @@ multi_pmem_LDADD = \
 		$(UUID_LIBS) \
 		$(KMOD_LIBS) \
 		../libutil.a
+
+list_smart_dimm_SOURCES = \
+		list-smart-dimm.c \
+		../util/json.c
+list_smart_dimm_LDADD = \
+		$(LIBNDCTL_LIB) \
+		$(JSON_LIBS) \
+		../libutil.a
test/list-smart-dimm.c new file +117 -0
new file mode 100644
index 0000000..c9982d5
@@ -0,0 +1,117 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 2018, FUJITSU LIMITED. All rights reserved. */
+
+#include <stdio.h>
+#include <errno.h>
+#include <util/json.h>
+#include <util/filter.h>
+#include <json-c/json.h>
+#include <ndctl/libndctl.h>
+#include <util/parse-options.h>
+#include <ndctl.h>
+
+struct util_filter_params param;
+static int did_fail;
+static int jflag = JSON_C_TO_STRING_PRETTY;
+
+#define fail(fmt, ...) \
+do { \
+	did_fail = 1; \
+	fprintf(stderr, "ndctl-%s:%s:%d: " fmt, \
+			VERSION, __func__, __LINE__, ##__VA_ARGS__); \
+} while (0)
+
+static bool filter_region(struct ndctl_region *region,
+		struct util_filter_ctx *ctx)
+{
+	return true;
+}
+
+static void filter_dimm(struct ndctl_dimm *dimm, struct util_filter_ctx *ctx)
+{
+	struct list_filter_arg *lfa = ctx->list;
+	struct json_object *jdimm;
+
+	if (!ndctl_dimm_is_cmd_supported(dimm, ND_CMD_SMART))
+		return;
+	if (!ndctl_dimm_is_cmd_supported(dimm, ND_CMD_SMART_THRESHOLD))
+		return;
+	if (!ndctl_dimm_is_flag_supported(dimm, ND_SMART_ALARM_VALID))
+		return;
+
+	if (!lfa->jdimms) {
+		lfa->jdimms = json_object_new_array();
+		if (!lfa->jdimms) {
+			fail("\n");
+			return;
+		}
+	}
+
+	jdimm = util_dimm_to_json(dimm, lfa->flags);
+	if (!jdimm) {
+		fail("\n");
+		return;
+	}
+
+	json_object_array_add(lfa->jdimms, jdimm);
+}
+
+static bool filter_bus(struct ndctl_bus *bus, struct util_filter_ctx *ctx)
+{
+	return true;
+}
+
+static int list_display(struct list_filter_arg *lfa)
+{
+	struct json_object *jdimms = lfa->jdimms;
+
+	if (jdimms)
+		util_display_json_array(stdout, jdimms, jflag);
+	return 0;
+}
+
+int main(int argc, const char *argv[])
+{
+	struct ndctl_ctx *ctx;
+	int i, rc;
+	const struct option options[] = {
+		OPT_STRING('b', "bus", &param.bus, "bus-id", "filter by bus"),
+		OPT_STRING('r', "region", &param.region, "region-id",
+				"filter by region"),
+		OPT_STRING('d', "dimm", &param.dimm, "dimm-id",
+				"filter by dimm"),
+		OPT_STRING('n', "namespace", &param.namespace, "namespace-id",
+				"filter by namespace id"),
+		OPT_END(),
+	};
+	const char * const u[] = {
+		"list-smart-dimm [<options>]",
+		NULL
+	};
+	struct util_filter_ctx fctx = { 0 };
+	struct list_filter_arg lfa = { 0 };
+
+	rc = ndctl_new(&ctx);
+	if (rc < 0)
+		return EXIT_FAILURE;
+        argc = parse_options(argc, argv, options, u, 0);
+	for (i = 0; i < argc; i++)
+		error("unknown parameter \"%s\"\n", argv[i]);
+	if (argc)
+		usage_with_options(u, options);
+
+	fctx.filter_bus = filter_bus;
+	fctx.filter_dimm = filter_dimm;
+	fctx.filter_region = filter_region;
+	fctx.filter_namespace = NULL;
+	fctx.list = &lfa;
+	lfa.flags = 0;
+
+	rc = util_filter_walk(ctx, &fctx, &param);
+	if (rc)
+		return rc;
+
+	if (list_display(&lfa) || did_fail)
+		return -ENOMEM;
+	return 0;
+}
test/monitor.sh new file +136 -0
new file mode 100755
index 0000000..1401983
@@ -0,0 +1,146 @@
+#!/bin/bash -Ex
+
+# SPDX-License-Identifier: GPL-2.0
+# Copyright(c) 2018, FUJITSU LIMITED. All rights reserved.
+
+rc=77
+logfile=""
+conf_file=""
+monitor_dimms=""
+monitor_regions=""
+monitor_namespace=""
+monitor_pid=65536
+
+. ./common
+
+trap 'err $LINENO' ERR
+
+check_min_kver "4.15" || do_skip "kernel $KVER may not support monitor service"
+
+start_monitor()
+{
+	logfile=$(mktemp)
+	$NDCTL monitor -l $logfile $1 &
+	monitor_pid=$!
+	truncate --size 0 $logfile #remove startup log
+}
+
+get_monitor_dimm()
+{
+	jlist=$(./list-smart-dimm -b $smart_supported_bus $1)
+	monitor_dimms=$(jq '.[]."dev"?, ."dev"?' <<<$jlist | sort | uniq | xargs)
+}
+
+call_notify()
+{
+	./smart-notify $smart_supported_bus
+	sync; sleep 3
+}
+
+check_result()
+{
+	jlog=$(cat $logfile)
+	notify_dimms=$(jq ."dimm"."dev" <<<$jlog | sort | uniq | xargs)
+	[[ $monitor_dimms == $notify_dimms ]]
+}
+
+stop_monitor()
+{
+	kill $monitor_pid
+	rm $logfile
+}
+
+create_conf_file()
+{
+	conf_file=$(mktemp)
+	echo "dimm = $1" > $conf_file
+}
+
+test_filter_dimm()
+{
+	smart_supported_bus=$NFIT_TEST_BUS0
+	monitor_dimms=$(./list-smart-dimm -b $smart_supported_bus | jq -r .[0].dev)
+	if [ -z $monitor_dimms ]; then
+		smart_supported_bus=$NFIT_TEST_BUS1
+		monitor_dimms=$(./list-smart-dimm -b $smart_supported_bus | jq -r .[0].dev)
+	fi
+	start_monitor "-d $monitor_dimms"
+	call_notify
+	check_result
+	stop_monitor
+}
+
+test_filter_bus()
+{
+	monitor_dimms=""
+	get_monitor_dimm
+	start_monitor "-b $smart_supported_bus"
+	call_notify
+	check_result
+	stop_monitor
+}
+
+test_filter_region()
+{
+	monitor_dimms=""
+	monitor_region=""
+	count=$($NDCTL list -R -b $smart_supported_bus | jq -r .[].dev | wc -l)
+	i=0
+	while [ $i -lt $count ]; do
+		monitor_region=$($NDCTL list -R -b $smart_supported_bus | jq -r .[$i].dev)
+		get_monitor_dimm "-r $monitor_region"
+		[ ! -z $monitor_dimms ] && break
+		i=$[$i+1]
+	done
+	start_monitor "-r $monitor_region"
+	call_notify
+	check_result
+	stop_monitor
+}
+
+test_filter_namespace()
+{
+	monitor_dimms=""
+	monitor_namespace=$($NDCTL list -N -b $smart_supported_bus | jq -r .[0].dev)
+	[ -z $monitor_namespace ] && monitor_namespace="namespace1.0"
+	$NDCTL create-namespace -b $smart_supported_bus -n $monitor_namespace
+	get_monitor_dimm "-n $monitor_namespace"
+	start_monitor "-n $monitor_namespace"
+	call_notify
+	check_result
+	stop_monitor
+	$NDCTL destroy-namespace $monitor_namespace -f
+}
+
+test_conf_file()
+{
+	create_conf_file  "$monitor_dimms"
+	start_monitor "-c $conf_file"
+	call_notify
+	check_result
+	stop_monitor
+	rm $conf_file
+}
+
+do_tests()
+{
+	test_filter_dimm
+	test_filter_bus
+	test_filter_region
+	test_filter_namespace
+	test_conf_file
+}
+
+init()
+{
+	$NDCTL disable-region -b $NFIT_TEST_BUS0 all

test/monitor.sh line 146

Quoted 10 lines
test/monitor.sh new file +10 -0
+	$NDCTL zero-labels -b $NFIT_TEST_BUS0 all
+	$NDCTL enable-region -b $NFIT_TEST_BUS0 all
+}
+
+modprobe nfit_test
+rc=1
+init
+do_tests
+_cleanup
+exit 0

_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm