ndctl, test: add a new unit test for monitor
PATCH v3 1/1 ndctl, test: add a new unit test for monitor
Add a new unit test to test the following options of the monitor command.
--dimm
--bus
--region
--namespace
--logfile
--config-file
---
v2 -> v3:
- Add filter_obj instead of hard-coded values
v1 -> v2:
- Add init()
- Add get_filter_dimm() to get the filter dimms by ndctl list command instead of hard-cording
- Add sleep to call_notify()
test/Makefile.am | 3 +- test/monitor.sh | 134 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 136 insertions(+), 1 deletion(-) create mode 100755 test/monitor.sh
test/Makefile.am +2 -1
@@ -21,7 +21,8 @@ TESTS =\ btt-pad-compat.sh \ firmware-update.sh \ ack-shutdown-count-set \ - rescan-partitions.sh + rescan-partitions.sh \ + monitor.sh check_PROGRAMS =\ libndctl \
test/monitor.sh new file +134 -0
134 lines not on this page · raw message
Signature · 7 lines
2.18.0 _______________________________________________ Linux-nvdimm mailing list [email protected] https://lists.01.org/mailman/listinfo/linux-nvdimm
Quoted 19 lines · QI Fuli
Add a new unit test to test the following options of the monitor command.
--dimm
--bus
--region
--namespace
--logfile
--config-fileBased-on-patch-by Yasunori Goto <[email protected]>Signed-off-by QI Fuli <[email protected]>---
v2 -> v3:
- Addfilter_objinstead of hard-coded values
v1 -> v2:
- Addinit()
- Addget_filter_dimm()to get the filter dimms by ndctl list command instead of hard-cording
- Add sleep tocall_notify()
Quoted 4 lines
test/Makefile.am | 3 +- test/monitor.sh | 134 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 136 insertions(+), 1 deletion(-) create mode 100755 test/monitor.sh
This test is still failing for me, here is the tail of the test/test-suite.log output:
+ sync
+ sleep 3
+ check_result
++ cat /tmp/tmp.dT3TJ4l5IE
+ jlog='nmem0: no smart support
no dimms to monitor'
++ jq .dimm.dev
++ sort
++ uniq
++ sed -e ':loop; N; $!b loop; s/\n/:/g'
++ sed 's/\"//g'
parse error: Invalid literal at line 1, column 6
+ notify_dimms=
+ [[ '' == '' ]]
+ stop_monitor
+ kill 39414
./monitor.sh: line 48: kill: (39414) - No such process ++ err 48
+++ basename ./monitor.sh
++ echo test/monitor.sh: failed at line 48 test/monitor.sh: failed at line 48
++ '[' -n '' ']'
++ exit 1
FAIL monitor.sh (exit status: 1)
I notice errors around get_filter_dimm(). Why is that function needed, it seems redundant now that $filter_obj is being used?
Hmm, if I just delete get_filter_dimm() I get this;
++ jq .dimm.dev
++ sort
++ uniq
++ sed -e ':loop; N; $!b loop; s/\n/:/g'
++ sed 's/\"//g'
+ notify_dimms=nmem3
+ [[ '' == nmem3 ]]
++ err 34
+++ basename ./monitor.sh
++ echo test/monitor.sh: failed at line 34test/monitor.sh: failed at line 34
++ '[' -n '' ']'
++ exit 1
FAIL monitor.sh (exit status: 1)
I assume this test is passing for you? Can you try running it inside a virtual machine that has a virtual NVDIMM so you can debug the collisions between the nfit_test.0 bus objects and the ACPI.NFIT ones?
Here is my test environment where this unit test is failing:
https://gist.github.com/djbw/144dc5ddaf5e935ad58bd66a702a5ea8
Quoted 42 lines
test/Makefile.am +2
-1@@ -21,7 +21,8 @@ TESTS =\ btt-pad-compat.sh \ firmware-update.sh \ ack-shutdown-count-set \ - rescan-partitions.sh + rescan-partitions.sh \ + monitor.sh check_PROGRAMS =\ libndctl \test/monitor.sh new file +21
-0@@ -0,0 +1,134 @@ +#!/bin/bash -Ex + +# SPDX-License-Identifier: GPL-2.0 +# Copyright(c) 2018, FUJITSU LIMITED. All rights reserved. + +rc=77 +logfile="" +conf_file="" +filter_dimms="" +filter_obj="" +monitor_pid=65536 + +. ./common + +trap 'err $LINENO' ERR + +check_min_kver "4.15" || do_skip "kernel $KVER may not support monitor service" + +start_monitor() +{ + logfile=$(mktemp)
test/monitor.sh line 31
Quoted 10 lines
test/monitor.sh new file +10
-0+ $NDCTL monitor -l $logfile $1 & + monitor_pid=$! + truncate --size 0 $logfile #remove startup log +} + +get_filter_dimm() +{ + jlist=$($NDCTL list -D -b $NFIT_TEST_BUS0 $1) + filter_dimms=$(jq '.[]."dev"?, ."dev"?' <<<$jlist | sort | uniq | sed -e ':loop; N; $!b loop; s/\n/:/g' | sed 's/\"//g') +}
Can we just remove this?
test/monitor.sh line 42
Quoted 11 lines
test/monitor.sh new file +11
-0+ +call_notify() +{ + ./smart-notify $NFIT_TEST_BUS0 + sync; sleep 3 +} + +check_result() +{ + jlog=$(cat $logfile) + notify_dimms=$(jq ."dimm"."dev" <<<$jlog | sort | uniq | sed -e ':loop; N; $!b loop; s/\n/:/g' | sed 's/\"//g')
Can you add a comment here about that sed script is trying to do? If it's just filtering json I'd rather it just jq directly.
_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm
Hi Dan,
Thanks for your comments.
Quoted 33 lines
-----Original Message-----
From: Dan Williams [mailto:[email protected]]
Sent: Sunday, July 8, 2018 3:56 AM
To: Qi, Fuli/斉 福利 <[email protected]>
Cc: linux-nvdimm <[email protected]>
Subject: Re: [ndctl PATCH v3] ndctl, test: add a new unit test for monitorQuoted 19 lines · QI Fuli
Add a new unit test to test the following options of the monitor command.
--dimm
--bus
--region
--namespace
--logfile
--config-fileBased-on-patch-by Yasunori Goto <[email protected]>Signed-off-by QI Fuli <[email protected]>---
v2 -> v3:
- Addfilter_objinstead of hard-coded values
v1 -> v2:
- Addinit()
- Addget_filter_dimm()to get the filter dimms by ndctl list command instead of hard-cording
- Add sleep tocall_notify()Quoted 5 lines
test/Makefile.am | 3 +- test/monitor.sh | 134 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 136 insertions(+), 1 deletion(-) create mode 100755
test/monitor.sh
Quoted 8 lines
This test is still failing for me, here is the tail of the test/test-suite.log output:
+ sync
+ sleep 3
+check_result
++ cat/tmp/tmp.dT3TJ4l5IE
+ jlog='nmem0: no smart support
My idea of [--dimm option] unit test is try to get the first dimm on bus nfit_test.0, then let
monitor to run [-d] option with it, the same as:
ndctl monitor -b nfit_test.0 -d nmem0
but in your environment, since the "nmem0" didn't support smart, then the monitor outputted the following error message and stopped.
Quoted 21 lines
no dimms to monitor'
++ jq .dimm.dev
++ sort
++ uniq
++ sed -e ':loop; N; $!b loop; s/\n/:/g'
++ sed 's/\"//g'
parse error: Invalid literal at line 1, column 6
+ notify_dimms=
+ [[ '' == '' ]]
+stop_monitor
+ kill 39414
./monitor.sh: line 48: kill: (39414) - No such process ++ err 48
+++ basename ./monitor.sh
++ echotest/monitor.sh: failed at line 48test/monitor.sh: failed at line 48
++ '[' -n '' ']'
++ exit 1
FAILmonitor.sh(exit status: 1)
Quoted 3 lines
I notice errors around
get_filter_dimm(). Why is that function needed, it seems redundant now that $filter_obj is being used?
I am sorry that the "filter_dimm" is not a suitable name, maybe changing it to "monitor_dimm" will be better to understand. This function is used to get dimms to be monitored from "ndctl list -D -b nfit_test.0 $1".
After "./smart-notify nfit_test.0", get "notify dimms" from output notifications.
Then compare the "monitor dimms" with the "notify dimms", if same that means the unit test option works well. I will add the a filter to make sure that the "monitor dimms" support smart event in next version.
Quoted 17 lines
Hmm, if I just delete
get_filter_dimm()I get this;++ jq .dimm.dev
++ sort
++ uniq
++ sed -e ':loop; N; $!b loop; s/\n/:/g'
++ sed 's/\"//g'
+ notify_dimms=nmem3
+ [[ '' == nmem3 ]]
++ err 34
+++ basename ./monitor.sh
++ echotest/monitor.sh: failed at line 34test/monitor.sh: failed at line 34
++ '[' -n '' ']'
++ exit 1
FAILmonitor.sh(exit status: 1)
Quoted 4 lines
I assume this test is passing for you? Can you try running it inside a virtual machine that has a virtual NVDIMM so you can debug the collisions between the nfit_test.0 bus objects and the ACPI.NFIT ones?
I passed this unit test on a virtual machine, which has a virtual NVDIMM. Here is the buses and dimms list of my test environment.
$ sudo ndctl list -BD
[
{
"provider":"nfit_test.0",
"dev":"ndbus1",
"scrub_state":"idle",
"dimms":[
{
"dev":"nmem1",
"id":"cdab-0a-07e0-feffffff",
"handle":1,
"phys_id":1
},
{
"dev":"nmem3",
"id":"cdab-0a-07e0-fefeffff",
"handle":257,
"phys_id":3
},
{
"dev":"nmem0",
"id":"cdab-0a-07e0-ffffffff",
"handle":0,
"phys_id":0
},
{
"dev":"nmem2",
"id":"cdab-0a-07e0-fffeffff",
"handle":256,
"phys_id":2
}
]
},
{
"provider":"e820",
"dev":"ndbus0"
},
{
"provider":"nfit_test.1",
"dev":"ndbus2",
"scrub_state":"idle",
"dimms":[
{
"dev":"nmem5",
"id":"cdab-0a-07e0-fefffeff",
"handle":65537,
"phys_id":0,
"flag_failed_map":true
},
{
"dev":"nmem4",
"id":"cdab-0a-07e0-fffffeff",
"handle":65536,
"phys_id":0,
"flag_failed_save":true,
"flag_failed_arm":true,
"flag_failed_restore":true,
"flag_failed_flush":true,
"flag_smart_event":true
}
]
}
]Quoted 48 lines
Here is my test environment where this unit test is failing:
https://gist.github.com/djbw/144dc5ddaf5e935ad58bd66a702a5ea8
Quoted 44 lines
test/Makefile.am index renamed from test/Makefile.am +0
-0cd451e9..8c76462 100644
test/Makefile.am +2
-1@@ -21,7 +21,8 @@ TESTS =\ btt-pad-compat.sh \ firmware-update.sh \ ack-shutdown-count-set \ - rescan-partitions.sh + rescan-partitions.sh \ + monitor.sh check_PROGRAMS =\ libndctl \test/monitor.sh new file +24
-0@@ -0,0 +1,134 @@ +#!/bin/bash -Ex + +# SPDX-License-Identifier: GPL-2.0 +# Copyright(c) 2018, FUJITSU LIMITED. All rights reserved. + +rc=77 +logfile="" +conf_file="" +filter_dimms="" +filter_obj="" +monitor_pid=65536 + +. ./common + +trap 'err $LINENO' ERR + +check_min_kver "4.15" || do_skip "kernel $KVER may not support monitor service" + +start_monitor() +{ + logfile=$(mktemp) + $NDCTL monitor -l $logfile $1 & + monitor_pid=$! + truncate --size 0 $logfile #remove startup log }
Quoted 8 lines
test/monitor.sh
Quoted 6 lines
test/monitor.sh new file +6
-0+ +get_filter_dimm() +{ + jlist=$($NDCTL list -D -b $NFIT_TEST_BUS0 $1) + filter_dimms=$(jq '.[]."dev"?, ."dev"?' <<<$jlist | sort | +uniq | sed -e ':loop; N; $!b loop; s/\n/:/g' | sed 's/\"//g') }Can we just remove this?
As I mentioned above, I don't think so.
Quoted 16 lines
test/monitor.sh
Quoted 13 lines
test/monitor.sh new file +12
-0+ +call_notify() +{ + ./smart-notify $NFIT_TEST_BUS0 + sync; sleep 3 +} + +check_result() +{ + jlog=$(cat $logfile) + notify_dimms=$(jq ."dimm"."dev" <<<$jlog | sort | uniq | sed +-e ':loop; N; $!b loop; s/\n/:/g' | sed 's/\"//g')Can you add a comment here about that sed script is trying to do? If it's just filtering json I'd rather it just jq directly.
These sed scripts are used to format "monitor dimms" and "notify dimms".
The first one is task to replace "\n" with ":", and the second one is used to remove ' " '. After these processes, the format will become "nmem0:nmem1:nmem2".
_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm
Quoted 45 lines · Fuli
Hi Dan,
Thanks for your comments.Quoted 33 lines
-----Original Message-----
From: Dan Williams [mailto:[email protected]]
Sent: Sunday, July 8, 2018 3:56 AM
To: Qi, Fuli/斉 福利 <[email protected]>
Cc: linux-nvdimm <[email protected]>
Subject: Re: [ndctl PATCH v3] ndctl, test: add a new unit test for monitorQuoted 19 lines · QI Fuli
Add a new unit test to test the following options of the monitor command.
--dimm
--bus
--region
--namespace
--logfile
--config-fileBased-on-patch-by Yasunori Goto <[email protected]>Signed-off-by QI Fuli <[email protected]>---
v2 -> v3:
- Addfilter_objinstead of hard-coded values
v1 -> v2:
- Addinit()
- Addget_filter_dimm()to get the filter dimms by ndctl list command instead of hard-cording
- Add sleep tocall_notify()Quoted 5 lines
test/Makefile.am | 3 +- test/monitor.sh | 134 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 136 insertions(+), 1 deletion(-) create mode 100755
test/monitor.shQuoted 8 lines
This test is still failing for me, here is the tail of the test/test-suite.log output:
+ sync
+ sleep 3
+check_result
++ cat/tmp/tmp.dT3TJ4l5IE
+ jlog='nmem0: no smart support
Quoted 4 lines
My idea of [--dimm option] unit test is try to get the first dimm on bus nfit_test.0, then let
monitor to run [-d] option with it, the same as:
ndctl monitor -b nfit_test.0 -d nmem0
but in your environment, since the "nmem0" didn't support smart, then the monitor outputted the following error message and stopped.
Right, the test is fragile if it tries to guess nmemX device names.
Quoted 22 lines
Quoted 22 lines
no dimms to monitor'
++ jq .dimm.dev
++ sort
++ uniq
++ sed -e ':loop; N; $!b loop; s/\n/:/g'
++ sed 's/\"//g'
parse error: Invalid literal at line 1, column 6
+ notify_dimms=
+ [[ '' == '' ]]
+stop_monitor
+ kill 39414
./monitor.sh: line 48: kill: (39414) - No such process ++ err 48
+++ basename ./monitor.sh
++ echotest/monitor.sh: failed at line 48test/monitor.sh: failed at line 48
++ '[' -n '' ']'
++ exit 1
FAILmonitor.sh(exit status: 1)
Quoted 9 lines
Quoted 3 lines
I notice errors around
get_filter_dimm(). Why is that function needed, it seems redundant now that $filter_obj is being used?I am sorry that the "
filter_dimm" is not a suitable name, maybe changing it to "monitor_dimm" will be better to understand. This function is used to get dimms to be monitored from "ndctl list -D -b nfit_test.0 $1".
After "./smart-notify nfit_test.0", get "notify dimms" from output notifications.
Then compare the "monitor dimms" with the "notify dimms", if same that means the unit test option works well. I will add the a filter to make sure that the "monitor dimms" support smart event in next version.
I'm confused, how does checking for smart event support get around the fact that the test is looking for the wrong DIMM names in the first place?
Quoted 23 lines
Quoted 22 lines
Hmm, if I just delete
get_filter_dimm()I get this;++ jq .dimm.dev
++ sort
++ uniq
++ sed -e ':loop; N; $!b loop; s/\n/:/g'
++ sed 's/\"//g'
+ notify_dimms=nmem3
+ [[ '' == nmem3 ]]
++ err 34
+++ basename ./monitor.sh
++ echotest/monitor.sh: failed at line 34test/monitor.sh: failed at line 34
++ '[' -n '' ']'
++ exit 1
FAILmonitor.sh(exit status: 1)I assume this test is passing for you? Can you try running it inside a virtual machine that has a virtual NVDIMM so you can debug the collisions between the nfit_test.0 bus objects and the ACPI.NFIT ones?
[..]
Quoted 8 lines
Quoted 6 lines
test/monitor.sh
Quoted 4 lines
test/monitor.sh new file +4
-0+{ + jlist=$($NDCTL list -D -b $NFIT_TEST_BUS0 $1) + filter_dimms=$(jq '.[]."dev"?, ."dev"?' <<<$jlist | sort | +uniq | sed -e ':loop; N; $!b loop; s/\n/:/g' | sed 's/\"//g') }Can we just remove this?
As I mentioned above, I don't think so.
Again, I don't see how you can achieve the verification you want without first discovering the names of the possible DIMMs on nfit_test.0. There is no reliable way that you can hard code the DIMM names.
Quoted 18 lines
Quoted 17 lines
Quoted 4 lines
test/monitor.sh new file +2
-0+ +call_notify()test/monitor.sh
Quoted 10 lines
test/monitor.sh new file +10
-0+{ + ./smart-notify $NFIT_TEST_BUS0 + sync; sleep 3 +} + +check_result() +{ + jlog=$(cat $logfile) + notify_dimms=$(jq ."dimm"."dev" <<<$jlog | sort | uniq | sed +-e ':loop; N; $!b loop; s/\n/:/g' | sed 's/\"//g')Can you add a comment here about that sed script is trying to do? If it's just filtering json I'd rather it just jq directly.
Quoted 3 lines
These sed scripts are used to format "monitor dimms" and "notify dimms".
The first one is task to replace "\n" with ":", and the second one is used to remove ' " '. After these processes, the format will become "nmem0:nmem1:nmem2".
That shell script just seems too dense for what it is trying to do. How about something like:
# ndctl list -D | jq -r .[].dev | xargs
That will take the output of 'list' and produce a space separated list.
_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm
Quoted 93 lines
-----Original Message-----
From: Dan Williams [mailto:[email protected]]
Sent: Tuesday, July 10, 2018 12:46 AM
To: Qi, Fuli/斉 福利 <[email protected]>
Cc: linux-nvdimm <[email protected]>
Subject: Re: [ndctl PATCH v3] ndctl, test: add a new unit test for monitorQuoted 38 lines · Fuli
Hi Dan,
Thanks for your comments.Quoted 35 lines
-----Original Message-----
From: Dan Williams [mailto:[email protected]]
Sent: Sunday, July 8, 2018 3:56 AM
To: Qi, Fuli/斉 福利 <[email protected]>
Cc: linux-nvdimm <[email protected]>
Subject: Re: [ndctl PATCH v3] ndctl, test: add a new unit test for monitorQuoted 19 lines · QI Fuli
Add a new unit test to test the following options of the monitor command.
--dimm
--bus
--region
--namespace
--logfile
--config-fileBased-on-patch-by Yasunori Goto <[email protected]>Signed-off-by QI Fuli <[email protected]>---
v2 -> v3:
- Addfilter_objinstead of hard-coded values
v1 -> v2:
- Addinit()
- Addget_filter_dimm()to get the filter dimms by ndctl list command instead of hard-cording
- Add sleep tocall_notify()Quoted 5 lines
test/Makefile.am | 3 +- test/monitor.sh | 134 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 136 insertions(+), 1 deletion(-) create mode100755
test/monitor.shThis test is still failing for me, here is the tail of the test/test-suite.log
output:
Quoted 8 lines
Quoted 7 lines
+ sync
+ sleep 3
+check_result
++ cat/tmp/tmp.dT3TJ4l5IE
+ jlog='nmem0: no smart supportQuoted 4 lines
My idea of [--dimm option] unit test is try to get the first dimm on bus nfit_test.0, then let monitor to run [-d] option with it, the same as:
ndctl monitor -b nfit_test.0 -d nmem0 but in your environment,
since the "nmem0" didn't support smart, then the monitor outputted the followingerror message and stopped.
Right, the test is fragile if it tries to guess nmemX device names.
Quoted 22 lines
Quoted 22 lines
no dimms to monitor'
++ jq .dimm.dev
++ sort
++ uniq
++ sed -e ':loop; N; $!b loop; s/\n/:/g'
++ sed 's/\"//g'
parse error: Invalid literal at line 1, column 6
+ notify_dimms=
+ [[ '' == '' ]]
+stop_monitor
+ kill 39414
./monitor.sh: line 48: kill: (39414) - No such process ++ err 48
+++ basename ./monitor.sh
++ echotest/monitor.sh: failed at line 48test/monitor.sh: failed at line 48
++ '[' -n '' ']'
++ exit 1
FAILmonitor.sh(exit status: 1)Quoted 5 lines
Quoted 3 lines
I notice errors around
get_filter_dimm(). Why is that function needed, it seems redundant now that $filter_obj is being used?I am sorry that the "
filter_dimm" is not a suitable name, maybe changing it to"
monitor_dimm" will be better to understand.Quoted 1 line
This function is used to get dimms to be monitored from "ndctl list -D -b nfit_test.0
$1".
Quoted 9 lines
Quoted 2 lines
After "./smart-notify nfit_test.0", get "notify dimms" from output notifications. Then compare the "monitor dimms" with the "notify dimms", if same that means the
unit test option works well.
Quoted 1 line
I will add the a filter to make sure that the "monitor dimms" support smart event
in next version.
I'm confused, how does checking for smart event support get around the fact that the test is looking for the wrong DIMM names in the first place?
I want to add a helper function "list-smart-dimm", which can list and filter all of the smart supported dimms. The "list-smart-dimm" could have the [-d] [-b] [-n] [-r] options the same as list.
For example to test the [-r] option of monitor:
First, we can get the "monitor_dimms = list-smart-dimm -b nfit_test.0 -r regionX".
If "monitor_dimms" is NULL, then get the "monitor_dimms" form "list-smart-dimm -b nfit_test.1 -r regionX". Next, start monitor "ndctl monitor -b nfit_test.0 -r regionX".
We can get the "notify_dimms" logged by monitor after do the "smart-notify nfit_test.0(1)". Then check the result, if "monitor_dimms" is the same as "notify_dimms", it means the monitor works well.
Quoted 59 lines
Quoted 23 lines
Quoted 22 lines
Hmm, if I just delete
get_filter_dimm()I get this;++ jq .dimm.dev
++ sort
++ uniq
++ sed -e ':loop; N; $!b loop; s/\n/:/g'
++ sed 's/\"//g'
+ notify_dimms=nmem3
+ [[ '' == nmem3 ]]
++ err 34
+++ basename ./monitor.sh
++ echotest/monitor.sh: failed at line 34test/monitor.sh: failed at line 34
++ '[' -n '' ']'
++ exit 1
FAILmonitor.sh(exit status: 1)I assume this test is passing for you? Can you try running it inside a virtual machine that has a virtual NVDIMM so you can debug the collisions between the nfit_test.0 bus objects and the ACPI.NFIT ones?
[..]
Quoted 8 lines
Quoted 6 lines
test/monitor.sh
Quoted 4 lines
test/monitor.sh new file +4
-0+{ + jlist=$($NDCTL list -D -b $NFIT_TEST_BUS0 $1) + filter_dimms=$(jq '.[]."dev"?, ."dev"?' <<<$jlist | sort | +uniq | sed -e ':loop; N; $!b loop; s/\n/:/g' | sed 's/\"//g') }Can we just remove this?
As I mentioned above, I don't think so.
Again, I don't see how you can achieve the verification you want without first discovering the names of the possible DIMMs on nfit_test.0. There is no reliable way that you can hard code the DIMM names.
Quoted 18 lines
Quoted 17 lines
Quoted 4 lines
test/monitor.sh new file +2
-0+ +call_notify()test/monitor.sh
Quoted 10 lines
test/monitor.sh new file +10
-0+{ + ./smart-notify $NFIT_TEST_BUS0 + sync; sleep 3 +} + +check_result() +{ + jlog=$(cat $logfile) + notify_dimms=$(jq ."dimm"."dev" <<<$jlog | sort | uniq | +sed -e ':loop; N; $!b loop; s/\n/:/g' | sed 's/\"//g')Can you add a comment here about that sed script is trying to do? If it's just filtering json I'd rather it just jq directly.
Quoted 2 lines
These sed scripts are used to format "monitor dimms" and "notify dimms". The first one is task to replace "\n" with ":", and the second one is used to remove
' " '.
Quoted 9 lines
Quoted 1 line
After these processes, the format will become "nmem0:nmem1:nmem2".
That shell script just seems too dense for what it is trying to do. How about something like:
# ndctl list -D | jq -r .[].dev | xargsThat will take the output of 'list' and produce a space separated list.
Yes, I will replace the sed scripts with xargs.
Thank you very much.
_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm