staging:rtl8192u: Refactor enums r8192U_dm.h -Style
cover staging:rtl8192u: Refactor enums r8192U_dm.h -Style
What was intended as a clean up of the file drivers/staging/rtl8192u/r8192U_dm.h turned into refactoring of most of the enumerated types defined in the file. Most of the enumerated types were simply used to define a collection of constants, rather then actually using the types as enumerated types.
So the variables which used the enums were all defined as being of type u8. This removes the ability of the compiler to do type checking of the types used. To correct this all u8 types have been changed to enums where appropriate.
Whilst I've called these patches refactoring they are all essentially coding style changes.
John Whitmore (10):
staging:rtl8192u: Remove unused DM_check_fsync_time_interval - Style staging:rtl8192u: Refactor use of enum dm_dig_sta_e - Style staging:rtl8192u: Refactor enum dm_ratr_sta_e usage - Style staging:rtl8192u: Remove enum dm_dig_op_e staging:rtl8192u: Refactor enum dm_dig_alg_e - Style staging:rtl8192u: Remove unused enum dm_dig_dbg_e - Style staging:rtl8192u: Refactor dm_dig_connect_e - Style staging:rtl8192u: Refactor enum dm_dig_pd_th_e - Style staging:rtl8192u: Refactor enum dm_dig_cs_ratio_e - Style staging:rtl8192u: Refactor enum DM_CCK_Rx_Path_Method - Style
drivers/staging/rtl8192u/r8192U.h | 10 ++- drivers/staging/rtl8192u/r8192U_dm.c | 91 ------------------- drivers/staging/rtl8192u/r8192U_dm.h | 125 +++++++++------------------ 3 files changed, 51 insertions(+), 175 deletions(-)
Signature · 1 line
2.18.0
PATCH 1/10 staging:rtl8192u: Remove unused DM_check_fsync_time_interval - Style
Remove the unused definition for DM_check_fsync_time_interval.
This is a coding style change which should have no impact on runtime code execution.
--- drivers/staging/rtl8192u/r8192U_dm.h | 3 --- 1 file changed, 3 deletions(-)
drivers/staging/rtl8192u/r8192U_dm.h +0 -3
@@ -32,9 +32,6 @@#define BW_AUTO_SWITCH_HIGH_LOW 25#define BW_AUTO_SWITCH_LOW_HIGH 30 -#define DM_check_fsync_time_interval 500 - -#define DM_DIG_BACKOFF 12#define DM_DIG_MAX 0x36#define DM_DIG_MIN 0x1c
Signature · 1 line
2.18.0
PATCH 2/10 staging:rtl8192u: Refactor use of enum dm_dig_sta_e - Style
In reply to John WhitmoreRefactor the use of the enumerated type dm_dig_sta_e, which is not actually used for type checking by the compiler.
The enumerated type defines values for the enumeration, which are used by both dig_state and dig_highpwr_state, (members of the struct dig). Both of those variables were defined as being of type u8. This negates any usefulness of the use of the enumeration, (compiler type checking).
To make use of the compiler's type-checking the two member variables, dig_state and dig_highpwr_state have been changed to being of type enum dm_dig_sta_e. The enumerated type has been moved above the struct dig definition so that the enumeration is already defined when compiler reaches the two types using the enumerated type.
In addition the 'typedef' of the enumerated type has been removed to clear the checkpatch issue with declaring new types.
These changes, whilst convoluted, are purely coding style in nature and should not impact runtime code execution.
--- drivers/staging/rtl8192u/r8192U_dm.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/staging/rtl8192u/r8192U_dm.h +9 -9
@@ -64,6 +64,13 @@/*------------------------------Define structure----------------------------*/ + +enum dm_dig_sta_e { +DM_STA_DIG_OFF =0 , +DM_STA_DIG_ON , +DM_STA_DIG_MAX +}; +/* 2007/10/04 MH Define upper and lower threshold of DIG enable or disable. */ struct dig {u8 dig_enable_flag;
@@ -77,8 +84,8 @@ struct dig {long rssi_high_power_lowthresh;long rssi_high_power_highthresh; -u8 dig_state; -u8 dig_highpwr_state; +enum dm_dig_sta_e dig_state; +enum dm_dig_sta_e dig_highpwr_state;u8 cur_connect_state;u8 pre_connect_state;
@@ -98,13 +105,6 @@ struct dig {long rssi_val; }; -typedef enum tag_dynamic_init_gain_state_definition { -DM_STA_DIG_OFF =0 , -DM_STA_DIG_ON , -DM_STA_DIG_MAX -}dm_dig_sta_e ; - -/* 2007/10/08 MH Define RATR state. */ typedef enum tag_dynamic_ratr_state_definition { DM_RATR_STA_HIGH = 0,
Signature · 1 line
2.18.0
Greg KH
maintainerRe: [PATCH 02/10] staging:rtl8192u: Refactor use of enum dm_dig_sta_e - Style
Quoted 30 lines · John Whitmore
Refactor the use of the enumerated type
dm_dig_sta_e, which is not actually used for type checking by the compiler.The enumerated type defines values for the enumeration, which are used by both
dig_stateanddig_highpwr_state, (members of the struct dig). Both of those variables were defined as being of type u8. This negates any usefulness of the use of the enumeration, (compiler type checking).To make use of the compiler's type-checking the two member variables,
dig_stateanddig_highpwr_statehave been changed to being of type enumdm_dig_sta_e. The enumerated type has been moved above the struct dig definition so that the enumeration is already defined when compiler reaches the two types using the enumerated type.In addition the 'typedef' of the enumerated type has been removed to clear the checkpatch issue with declaring new types.
These changes, whilst convoluted, are purely coding style in nature and should not impact runtime code execution.
Signed-off-by John Whitmore <[email protected]>--- drivers/staging/rtl8192u/r8192U_dm.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)drivers/staging/rtl8192u/r8192U_dm.h +0
-0
drivers/staging/rtl8192u/r8192U_dm.h line 68
Quoted 5 lines
drivers/staging/rtl8192u/r8192U_dm.h +2
-0@@ -64,6 +64,13 @@/*------------------------------Define structure----------------------------*/ + +enum dm_dig_sta_e {
Don't end an enum with "_e", as that's not needed at all.
thanks,
greg k-h
Re: [PATCH 02/10] staging:rtl8192u: Refactor use of enum dm_dig_sta_e - Style
Quoted 39 lines · Greg KH
Quoted 30 lines · John Whitmore
Refactor the use of the enumerated type
dm_dig_sta_e, which is not actually used for type checking by the compiler.The enumerated type defines values for the enumeration, which are used by both
dig_stateanddig_highpwr_state, (members of the struct dig). Both of those variables were defined as being of type u8. This negates any usefulness of the use of the enumeration, (compiler type checking).To make use of the compiler's type-checking the two member variables,
dig_stateanddig_highpwr_statehave been changed to being of type enumdm_dig_sta_e. The enumerated type has been moved above the struct dig definition so that the enumeration is already defined when compiler reaches the two types using the enumerated type.In addition the 'typedef' of the enumerated type has been removed to clear the checkpatch issue with declaring new types.
These changes, whilst convoluted, are purely coding style in nature and should not impact runtime code execution.
Signed-off-by John Whitmore <[email protected]>--- drivers/staging/rtl8192u/r8192U_dm.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)drivers/staging/rtl8192u/r8192U_dm.h +0
-0drivers/staging/rtl8192u/r8192U_dm.h line 68
Quoted 5 lines
drivers/staging/rtl8192u/r8192U_dm.h +2
-0@@ -64,6 +64,13 @@/*------------------------------Define structure----------------------------*/ + +enum dm_dig_sta_e {Don't end an enum with "_e", as that's not needed at all.
Quoted 3 lines
thanks,
greg k-h
Oh! Thanks for that, it never occured to me that the '_e' was notation. Again I'll fix up all those affected and resend.
jwhitmore
PATCH 3/10 staging:rtl8192u: Refactor enum dm_ratr_sta_e usage - Style
In reply to John WhitmoreThe enumerated type dm_ratr_sta_e was defined in the file drivers/staging/rtl8192u/r8192U_dm.h but never actually used in that file. The only variable which uses this enumerated type is 'ratr_state', a member variable of the _rate_adaptive structure defined in the file drivers/staging/rtl8192u/r8192U.h.
To clarify and place the enumerated type close to where it is used the type was moved to the drivers/staging/rtl8192u/r8192U.h file.
In addition the member variable 'ratr_state' which uses the enumerated constants was declared as being of type 'u8'. This negates any advantage of the enumerated type, compiler type-checking, so that member variable's type has been changed to being of the enumerated type.
Additionally the typedef from the enumerated type has been removed to clear the checkpatch issue with defining new types.
This is a coding style change and should have no impact on runtime code execution.
--- drivers/staging/rtl8192u/r8192U.h | 10 +++++++++- drivers/staging/rtl8192u/r8192U_dm.h | 8 -------- 2 files changed, 9 insertions(+), 9 deletions(-)
drivers/staging/rtl8192u/r8192U.h +9 -1
@@ -662,9 +662,17 @@ typedef enum _RT_RF_TYPE_819xU {RF_PSEUDO_11N =4 , } RT_RF_TYPE_819xU, *PRT_RF_TYPE_819xU; +/* 2007/10/08 MH Define RATR state. */ +enum dm_ratr_sta_e { +DM_RATR_STA_HIGH =0 , +DM_RATR_STA_MIDDLE =1 , +DM_RATR_STA_LOW =2 , +DM_RATR_STA_MAX +}; + typedef struct _rate_adaptive { u8 rate_adaptive_disabled; - u8 ratr_state; + enum dm_ratr_sta_e ratr_state; u16 reserve; u32 high_rssi_thresh_for_ra;
drivers/staging/rtl8192u/r8192U_dm.h +0 -8
@@ -105,14 +105,6 @@ struct dig {long rssi_val; }; -/* 2007/10/08 MH Define RATR state. */ -typedef enum tag_dynamic_ratr_state_definition { -DM_RATR_STA_HIGH =0 , -DM_RATR_STA_MIDDLE =1 , -DM_RATR_STA_LOW =2 , -DM_RATR_STA_MAX -}dm_ratr_sta_e ; -/* 2007/10/11 MH Define DIG operation type. */ typedef enum tag_dynamic_init_gain_operation_type_definition { DIG_TYPE_THRESH_HIGH = 0,
Signature · 1 line
2.18.0
PATCH 4/10 staging:rtl8192u: Remove enum dm_dig_op_e
In reply to John WhitmoreRemove the enumerated type dm_dig_op_e. The type is only used as a parameter to the function dm_change_dynamic_initgain_thresh(), but that function is never referenced in the code at all.
I would consider this to be a coding style change as the function is never referenced and as a result the enumeration is never used. In any case there should be no impact on runtime code execution.
--- drivers/staging/rtl8192u/r8192U_dm.c | 91 ---------------------------- drivers/staging/rtl8192u/r8192U_dm.h | 20 ------ 2 files changed, 111 deletions(-)
drivers/staging/rtl8192u/r8192U_dm.c +0 -91
@@ -1613,97 +1613,6 @@ static void dm_bb_initialgain_backup(struct net_device *dev) } /* dm_BBInitialGainBakcup */#endif -/*----------------------------------------------------------------------------- -* Function: dm_change_dynamic_initgain_thresh() -* -* Overview: -* -* Input: NONE -* -* Output: NONE -* -* Return: NONE -* -* Revised History: -* When Who Remark -* 05/29/2008 amy Create Version 0 porting from windows code. -* -*---------------------------------------------------------------------------*/ - -void dm_change_dynamic_initgain_thresh (struct net_device *dev,u32 dm_type, -u32 dm_value) -{ -switch (dm_type) { -case DIG_TYPE_THRESH_HIGH : - dm_digtable.rssi_high_thresh = dm_value; -break ; - -case DIG_TYPE_THRESH_LOW : - dm_digtable.rssi_low_thresh = dm_value; -break ; - -case DIG_TYPE_THRESH_HIGHPWR_HIGH : - dm_digtable.rssi_high_power_highthresh = dm_value; -break ; - -case DIG_TYPE_THRESH_HIGHPWR_LOW : - dm_digtable.rssi_high_power_lowthresh = dm_value; -break ; - -case DIG_TYPE_ENABLE : - dm_digtable.dig_state =DM_STA_DIG_MAX ; - dm_digtable.dig_enable_flag = true; -break ; - -case DIG_TYPE_DISABLE : - dm_digtable.dig_state =DM_STA_DIG_MAX ; - dm_digtable.dig_enable_flag = false; -break ; - -case DIG_TYPE_DBG_MODE : -if (dm_value >=DM_DBG_MAX ) - dm_value =DM_DBG_OFF ; - dm_digtable.dbg_mode = (u8 )dm_value; -break ; - -case DIG_TYPE_RSSI : -if (dm_value >100 ) - dm_value =30 ; - dm_digtable.rssi_val = (long )dm_value; -break ; - -case DIG_TYPE_ALGORITHM : -if (dm_value >=DIG_ALGO_MAX ) - dm_value =DIG_ALGO_BY_FALSE_ALARM ; -if (dm_digtable.dig_algorithm != (u8 )dm_value) - dm_digtable.dig_algorithm_switch =1 ; - dm_digtable.dig_algorithm = (u8 )dm_value; -break ; - -case DIG_TYPE_BACKOFF : -if (dm_value >30 ) - dm_value =30 ; - dm_digtable.backoff_val = (u8 )dm_value; -break ; - -case DIG_TYPE_RX_GAIN_MIN : -if (dm_value ==0 ) - dm_value =0x1 ; - dm_digtable.rx_gain_range_min = (u8 )dm_value; -break ; - -case DIG_TYPE_RX_GAIN_MAX : -if (dm_value >0x50 ) - dm_value =0x50 ; - dm_digtable.rx_gain_range_max = (u8 )dm_value; -break ; - -default : -break ; - } - -}/* DM_ChangeDynamicInitGainThresh */ -/*----------------------------------------------------------------------------- * Function: dm_dig_init() *
drivers/staging/rtl8192u/r8192U_dm.h +0 -20
@@ -105,24 +105,6 @@ struct dig {long rssi_val; }; -/* 2007/10/11 MH Define DIG operation type. */ -typedef enum tag_dynamic_init_gain_operation_type_definition { -DIG_TYPE_THRESH_HIGH =0 , -DIG_TYPE_THRESH_LOW =1 , -DIG_TYPE_THRESH_HIGHPWR_HIGH =2 , -DIG_TYPE_THRESH_HIGHPWR_LOW =3 , -DIG_TYPE_DBG_MODE =4 , -DIG_TYPE_RSSI =5 , -DIG_TYPE_ALGORITHM =6 , -DIG_TYPE_BACKOFF =7 , -DIG_TYPE_PWDB_FACTOR =8 , -DIG_TYPE_RX_GAIN_MIN =9 , -DIG_TYPE_RX_GAIN_MAX =10 , -DIG_TYPE_ENABLE =20 , -DIG_TYPE_DISABLE =30 , -DIG_OP_TYPE_MAX -}dm_dig_op_e ; - typedef enum tag_dig_algorithm_definition { DIG_ALGO_BY_FALSE_ALARM = 0, DIG_ALGO_BY_RSSI = 1,
@@ -209,8 +191,6 @@ void init_rate_adaptive(struct net_device *dev);void dm_txpower_trackingcallback (struct work_struct *work);void dm_restore_dynamic_mechanism_state (struct net_device *dev);void dm_backup_dynamic_mechanism_state (struct net_device *dev); -void dm_change_dynamic_initgain_thresh (struct net_device *dev, -u32 dm_type,u32 dm_value);void dm_force_tx_fw_info (struct net_device *dev,u32 force_type,u32 force_value);void dm_init_edca_turbo (struct net_device *dev);
Signature · 1 line
2.18.0
PATCH 5/10 staging:rtl8192u: Refactor enum dm_dig_alg_e - Style
In reply to John WhitmoreThe enumerated type dm_dig_alg_e is only used by one variable in the code, 'dig_algorithm', a member variable of the structure dig. That member variable was defined to be of type 'u8' thus negating any advantage of the use of an enumerated type, (compiler type-checking).
The type of the variable 'dig_algorithm' has been change to reflect its use of the enumeration and the enumerated type moved in the file so that it appears before it is used in the file.
Additionally the 'typedef' has been removed to clear the checkpatch issue with defining new types.
These changes are all coding style in nature and as such should have no impact on runtime code execution.
--- drivers/staging/rtl8192u/r8192U_dm.h | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)
drivers/staging/rtl8192u/r8192U_dm.h +6 -7
@@ -65,6 +65,11 @@/*------------------------------Define structure----------------------------*/ +enum dm_dig_alg_e { +DIG_ALGO_BY_FALSE_ALARM =0 , +DIG_ALGO_BY_RSSI =1 , +}; +enum dm_dig_sta_e {DM_STA_DIG_OFF =0 ,DM_STA_DIG_ON ,
@@ -74,7 +79,7 @@ enum dm_dig_sta_e {/* 2007/10/04 MH Define upper and lower threshold of DIG enable or disable. */ struct dig {u8 dig_enable_flag; -u8 dig_algorithm; +enum dm_dig_alg_e dig_algorithm;u8 dbg_mode;u8 dig_algorithm_switch;
@@ -105,12 +110,6 @@ struct dig {long rssi_val; }; -typedef enum tag_dig_algorithm_definition { -DIG_ALGO_BY_FALSE_ALARM =0 , -DIG_ALGO_BY_RSSI =1 , -DIG_ALGO_MAX -}dm_dig_alg_e ; - typedef enum tag_dig_dbgmode_definition { DIG_DBG_OFF = 0, DIG_DBG_ON = 1,
Signature · 1 line
2.18.0
PATCH 6/10 staging:rtl8192u: Remove unused enum dm_dig_dbg_e - Style
In reply to John WhitmoreThe enumerated type dm_dig_dbg_e is never used in code so has simply been removed from the source code.
this is a coding style change which should have no impact on runtime code execution.
--- drivers/staging/rtl8192u/r8192U_dm.h | 6 ------ 1 file changed, 6 deletions(-)
drivers/staging/rtl8192u/r8192U_dm.h +0 -6
@@ -110,12 +110,6 @@ struct dig {long rssi_val; }; -typedef enum tag_dig_dbgmode_definition { -DIG_DBG_OFF =0 , -DIG_DBG_ON =1 , -DIG_DBG_MAX -}dm_dig_dbg_e ; - typedef enum tag_dig_connect_definition { DIG_DISCONNECT = 0, DIG_CONNECT = 1,
Signature · 1 line
2.18.0
PATCH 7/10 staging:rtl8192u: Refactor dm_dig_connect_e - Style
In reply to John WhitmoreThe enumerated type dm_dig_connect_e is only used to group constant values, as the actual type is never used as the type for the variables which use the defined constants (cur_connect_state and pre_connect_state).
These two member variables have had there defined types changed to properly reflect there usage and to permit compiler type checks to be performed.
In addition the definition of the enumerated type has been moved above the structure which uses the type. The typedef of the enumerated type has been removed to clear the checkpatch issue with defining new types and the enumerated value DIG_CONNECT_MAX has been removed since it is never used in code.
The resulting changes are all coding style in nature and should not impact runtime code execution.
--- drivers/staging/rtl8192u/r8192U_dm.h | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-)
drivers/staging/rtl8192u/r8192U_dm.h +7 -8
@@ -76,6 +76,11 @@ enum dm_dig_sta_e {DM_STA_DIG_MAX }; +enum dm_dig_connect_e { +DIG_DISCONNECT =0 , +DIG_CONNECT =1 , +}; +/* 2007/10/04 MH Define upper and lower threshold of DIG enable or disable. */ struct dig {u8 dig_enable_flag;
@@ -91,8 +96,8 @@ struct dig {enum dm_dig_sta_e dig_state;enum dm_dig_sta_e dig_highpwr_state; -u8 cur_connect_state; -u8 pre_connect_state; +enum dm_dig_connect_e cur_connect_state; +enum dm_dig_connect_e pre_connect_state;u8 curpd_thstate;u8 prepd_thstate;
@@ -110,12 +115,6 @@ struct dig {long rssi_val; }; -typedef enum tag_dig_connect_definition { -DIG_DISCONNECT =0 , -DIG_CONNECT =1 , -DIG_CONNECT_MAX -}dm_dig_connect_e ; - typedef enum tag_dig_packetdetection_threshold_definition { DIG_PD_AT_LOW_POWER = 0, DIG_PD_AT_NORMAL_POWER = 1,
Signature · 1 line
2.18.0
PATCH 8/10 staging:rtl8192u: Refactor enum dm_dig_pd_th_e - Style
In reply to John WhitmoreThe enumerated type dm_dig_pd_th_e is never actually used as the type for the two variables which use the constants, which the enumeration defines. This omission removes the possibility of taking advantage of compiler type checking.
To correct this the two member variables, (curpd_thstate & prepd_thstate) have been changed to use the type enum dm_dig_pd_th_e rather then u8.
Additionally the enum's declaration has been moved above the dig structure, where the type is used, the 'typedef' has been removed to clear the checkpatch issue with defining new types, and the value 'DIG_PD_MAX' has been removed from the enumeration, since it is never used in code.
--- drivers/staging/rtl8192u/r8192U_dm.h | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-)
drivers/staging/rtl8192u/r8192U_dm.h +8 -9
@@ -81,6 +81,12 @@ enum dm_dig_connect_e { DIG_CONNECT = 1, }; +enum dm_dig_pd_th_e { +DIG_PD_AT_LOW_POWER =0 , +DIG_PD_AT_NORMAL_POWER =1 , +DIG_PD_AT_HIGH_POWER =2 , +}; +/* 2007/10/04 MH Define upper and lower threshold of DIG enable or disable. */ struct dig {u8 dig_enable_flag;
@@ -99,8 +105,8 @@ struct dig {enum dm_dig_connect_e cur_connect_state;enum dm_dig_connect_e pre_connect_state; -u8 curpd_thstate; -u8 prepd_thstate; +enum dm_dig_pd_th_e curpd_thstate; +enum dm_dig_pd_th_e prepd_thstate;u8 curcs_ratio_state;u8 precs_ratio_state;
@@ -115,13 +121,6 @@ struct dig {long rssi_val; }; -typedef enum tag_dig_packetdetection_threshold_definition { -DIG_PD_AT_LOW_POWER =0 , -DIG_PD_AT_NORMAL_POWER =1 , -DIG_PD_AT_HIGH_POWER =2 , -DIG_PD_MAX -}dm_dig_pd_th_e ; - typedef enum tag_dig_cck_cs_ratio_state_definition { DIG_CS_RATIO_LOWER = 0, DIG_CS_RATIO_HIGHER = 1,
Signature · 1 line
2.18.0
PATCH 9/10 staging:rtl8192u: Refactor enum dm_dig_cs_ratio_e - Style
In reply to John WhitmoreThe enumerated type dm_dig_cs_ratio_e is never actually used as a type, but only as a collection of related constants. This is because the variables, which use the defined constant values, are defined as being of type u8 rather then enum dm_dig_cs_ratio_e. This omission negates the possibility of taking advantage of compiler type checking.
To enable the use of compiler type checking of the enumeration the two variables, (curcs_ratio_state & precs_ratio_state), which use the type's constants have their types changed from u8 to enum dm_dig_cs_ratio_e.
Additionally the types declaration has been moved above the dig structure, where the type is used. The 'typedef' keyword has been removed from the type to clear the checkpatch issue with defining new types. And the constant DIG_CS_MAX has been removed since this is never used in the code.
These changes are purely coding style changes and should not impact on runtime code execution.
--- drivers/staging/rtl8192u/r8192U_dm.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/staging/rtl8192u/r8192U_dm.h +7 -7
@@ -87,6 +87,11 @@ enum dm_dig_pd_th_e { DIG_PD_AT_HIGH_POWER = 2, }; +enum dm_dig_cs_ratio_e { +DIG_CS_RATIO_LOWER =0 , +DIG_CS_RATIO_HIGHER =1 , +}; +/* 2007/10/04 MH Define upper and lower threshold of DIG enable or disable. */ struct dig {u8 dig_enable_flag;
@@ -107,8 +112,8 @@ struct dig {enum dm_dig_pd_th_e curpd_thstate;enum dm_dig_pd_th_e prepd_thstate; -u8 curcs_ratio_state; -u8 precs_ratio_state; +enum dm_dig_cs_ratio_e curcs_ratio_state; +enum dm_dig_cs_ratio_e precs_ratio_state;u32 pre_ig_value;u32 cur_ig_value;
@@ -121,11 +126,6 @@ struct dig {long rssi_val; }; -typedef enum tag_dig_cck_cs_ratio_state_definition { -DIG_CS_RATIO_LOWER =0 , -DIG_CS_RATIO_HIGHER =1 , -DIG_CS_MAX -}dm_dig_cs_ratio_e ;struct dynamic_rx_path_sel {u8 Enable;u8 DbgMode;
Signature · 1 line
2.18.0
PATCH 10/10 staging:rtl8192u: Refactor enum DM_CCK_Rx_Path_Method - Style
In reply to John WhitmoreThe enumerated type DM_CCK_Rx_Path_Method is used as a container for constant definitions, rather then an enumerated type enabling compiler type checking. To correct this, the variable which uses the constants, defined by the enumeration, has had its type changed from a u8 to the enumeration.
Additionally the type has been moved above the structure where the type is used, to avoid compiler error. The typedef has been removed from the enumerated type to clear the checkpatch issue with defining new types. The name of the type has been changed to dm_cck_rx_path_method to clear the checkpatch issue with CamelCase naming. And the enumerated constant CCK_Rx_Version_MAX has been removed, since it is never used in code.
The changes are all coding style in nature and so should have no impact on runtime code execution.
--- drivers/staging/rtl8192u/r8192U_dm.h | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)
drivers/staging/rtl8192u/r8192U_dm.h +6 -7
@@ -126,10 +126,15 @@ struct dig {long rssi_val; }; +enum dm_cck_rx_path_method { + CCK_Rx_Version_1 =0 , + CCK_Rx_Version_2 =1 , +}; +struct dynamic_rx_path_sel {u8 Enable;u8 DbgMode; -u8 cck_method; +enum dm_cck_rx_path_method cck_method;u8 cck_Rx_path;u8 SS_TH_low;
@@ -142,12 +147,6 @@ struct dynamic_rx_path_sel {long cck_pwdb_sta[4 ]; }; -typedef enum tag_CCK_Rx_Path_Method_Definition { - CCK_Rx_Version_1 =0 , - CCK_Rx_Version_2 =1 , - CCK_Rx_Version_MAX -}DM_CCK_Rx_Path_Method ; - typedef enum tag_DM_DbgMode_Definition { DM_DBG_OFF = 0, DM_DBG_ON = 1,
Signature · 1 line
2.18.0