drm: drm/i915: Add connector property to limit max bpc
Subsystems (3)
PATCH v3 1/2 drm: drm/i915: Add connector property to limit max bpc
At times 12bpc HDMI cannot be driven due to faulty cables, dongles level shifters etc. To workaround them we may need to drive the output at a lower bpc. Currently the user space does not have a way to limit the bpc. The default bpc to be programmed is decided by the driver and is run against connector limitations.
Creating a new connector property "max bpc" in order to limit the bpc with which the pixels are scanned out. xrandr can make use of this connector property to make sure that bpc does not exceed the configured value. This property can be used by userspace to set the bpc.
V2: Initialize max_bpc to satisfy kms_properties
V3: Move the property to drm_connector
--- drivers/gpu/drm/drm_atomic.c | 4 ++++ drivers/gpu/drm/drm_atomic_helper.c | 4 ++++ drivers/gpu/drm/i915/intel_drv.h | 2 ++ drivers/gpu/drm/i915/intel_hdmi.c | 11 +++++++++++ drivers/gpu/drm/i915/intel_modes.c | 20 ++++++++++++++++++++ include/drm/drm_connector.h | 6 ++++++ include/drm/drm_mode_config.h | 5 +++++ 7 files changed, 52 insertions(+)
drivers/gpu/drm/drm_atomic.c +4 -0
@@ -1416,6 +1416,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,return set_out_fence_for_connector (state->state, connector, fence_ptr); + }else if (property == config->max_bpc_property) { + state->max_bpc = val; }else if (connector->funcs->atomic_set_property) {return connector->funcs->atomic_set_property (connector, state, property, val);
@@ -1511,6 +1513,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector, *val =0 ; }else if (property == config->writeback_out_fence_ptr_property) { *val =0 ; + }else if (property == config->max_bpc_property) { + *val = state->max_bpc; }else if (connector->funcs->atomic_get_property) {return connector->funcs->atomic_get_property (connector, state, property, val);
drivers/gpu/drm/drm_atomic_helper.c +4 -0
@@ -638,6 +638,10 @@ drm_atomic_helper_check_modeset(struct drm_device *dev,if (old_connector_state->link_status != new_connector_state->link_status) new_crtc_state->connectors_changed = true; + +if (old_connector_state->max_bpc != + new_connector_state->max_bpc) + new_crtc_state->connectors_changed = true; }if (funcs->atomic_check)
drivers/gpu/drm/i915/intel_drv.h +2 -0
@@ -1862,6 +1862,8 @@ int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter);void intel_attach_force_audio_property (struct drm_connector *connector);void intel_attach_broadcast_rgb_property (struct drm_connector *connector);void intel_attach_aspect_ratio_property (struct drm_connector *connector); +void intel_attach_max_bpc_property (struct drm_connector *connector,int min,int + max);/* intel_overlay.c */
drivers/gpu/drm/i915/intel_hdmi.c +11 -0
@@ -2097,11 +2097,22 @@ static const struct drm_encoder_funcs intel_hdmi_enc_funcs = {static void intel_hdmi_add_properties (struct intel_hdmi *intel_hdmi,struct drm_connector *connector) { +struct drm_i915_private *dev_priv =to_i915 (connector->dev); +intel_attach_force_audio_property (connector);intel_attach_broadcast_rgb_property (connector);intel_attach_aspect_ratio_property (connector);drm_connector_attach_content_type_property (connector); connector->state->picture_aspect_ratio =HDMI_PICTURE_ASPECT_NONE ; + +if (IS_G4X (dev_priv) ||IS_VALLEYVIEW (dev_priv) || +IS_CHERRYVIEW (dev_priv)) { +intel_attach_max_bpc_property (connector,8 ,10 ); + connector->state->max_bpc =10 ; + }else if (INTEL_GEN (dev_priv) >=5 ) { +intel_attach_max_bpc_property (connector,8 ,12 ); + connector->state->max_bpc =12 ; + } }/*
drivers/gpu/drm/i915/intel_modes.c +20 -0
@@ -133,3 +133,23 @@ intel_attach_aspect_ratio_property(struct drm_connector *connector) connector->dev->mode_config.aspect_ratio_property, DRM_MODE_PICTURE_ASPECT_NONE); } + +void +intel_attach_max_bpc_property (struct drm_connector *connector,int min,int + max) +{ +struct drm_device *dev = connector->dev; +struct drm_mode_config *config = &dev->mode_config; +struct drm_property *prop; + + prop = config->max_bpc_property; +if (prop ==NULL ) { + prop =drm_property_create_range (dev,0 ,"max bpc" , min, max); +if (prop ==NULL ) +return ; + + config->max_bpc_property = prop; + } + +drm_object_attach_property (&connector->base, prop, max); +}
include/drm/drm_connector.h +6 -0
@@ -460,6 +460,12 @@ struct drm_connector_state {* drm_writeback_signal_completion() */ struct drm_writeback_job *writeback_job; + +/** +* @max_bpc: Connector property to limit the maximum bit depth of +* the pixels being scanned out. +*/ +unsigned int max_bpc; };/**
include/drm/drm_mode_config.h +5 -0
@@ -562,6 +562,11 @@ struct drm_mode_config {*/ struct drm_property *link_status_property;/** +* @max_bpc_property: Default connector property for the max bpc to be +* driven out of the connector. +*/ +struct drm_property *max_bpc_property; +/** * @plane_type_property: Default plane property to differentiate * CURSOR, PRIMARY and OVERLAY legacy uses of planes. */
Signature · 6 lines
2.9.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 2/2 drm/i915: Allow "max bpc" property to limit pipe_bpp
From: "Sripada, Radhakrishna" <[email protected]>
Use the newly added "max bpc" connector property to limit pipe bpp.
V3: Use drm_connector_state to access the "max bpc" property
--- drivers/gpu/drm/i915/intel_display.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
drivers/gpu/drm/i915/intel_display.c +25 -0
@@ -10784,6 +10784,28 @@ connected_sink_compute_bpp(struct intel_connector *connector, } } +static void +connected_sink_max_bpp (struct drm_connector_state *conn_state, +struct intel_crtc_state *pipe_config) +{ +switch (conn_state->max_bpc) { +case 8 : +case 9 : + pipe_config->pipe_bpp =8 *3 ; +break ; +case 10 : +case 11 : + pipe_config->pipe_bpp =10 *3 ; +break ; +case 12 : + pipe_config->pipe_bpp =12 *3 ; +break ; +default : +break ; + } +DRM_DEBUG_KMS ("Limiting display bpp to %d\n" , pipe_config->pipe_bpp); +} +static int compute_baseline_pipe_bpp (struct intel_crtc *crtc,struct intel_crtc_state *pipe_config)
@@ -10812,6 +10834,9 @@ compute_baseline_pipe_bpp(struct intel_crtc *crtc,if (connector_state->crtc != &crtc->base)continue ; +if (connector_state->max_bpc) +connected_sink_max_bpp (connector_state, pipe_config); +connected_sink_compute_bpp (to_intel_connector (connector), pipe_config); }
Signature · 6 lines
2.9.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for series starting with [v3,1/2] drm: drm/i915: Add connector property to limit max bpc
In reply to Radhakrishna Sripada== Series Details ==
== Series Details ==
Series: series starting with [v3,1/2] drm: drm/i915: Add connector property to limit max bpc
URL : https://patchwork.freedesktop.org/series/48695/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip cf2501ba38fa drm: drm/i915: Add connector property to limit max bpc -:17: WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit description (prefer a maximum 75 chars per line) #17: connector property to make sure that bpc does not exceed the configured value.
-:125: CHECK:COMPARISON_TO_NULL: Comparison to NULL could be written "!prop" #125: FILE: drivers/gpu/drm/i915/intel_modes.c:146:
+ if (prop == NULL) {
-:127: CHECK:COMPARISON_TO_NULL: Comparison to NULL could be written "!prop" #127: FILE: drivers/gpu/drm/i915/intel_modes.c:148:
+ if (prop == NULL)
total: 0 errors, 1 warnings, 2 checks, 102 lines checked 7855b6acf894 drm/i915: Allow "max bpc" property to limit pipe_bpp -:30: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #30: FILE: drivers/gpu/drm/i915/intel_display.c:10789:
+connected_sink_max_bpp(struct drm_connector_state *conn_state,
+ struct intel_crtc_state *pipe_config)
-:35: CHECK:SPACING: spaces preferred around that '*' (ctx:VxV) #35: FILE: drivers/gpu/drm/i915/intel_display.c:10794:
+ pipe_config->pipe_bpp = 8*3;
^
-:39: CHECK:SPACING: spaces preferred around that '*' (ctx:VxV) #39: FILE: drivers/gpu/drm/i915/intel_display.c:10798:
+ pipe_config->pipe_bpp = 10*3;
^
-:42: CHECK:SPACING: spaces preferred around that '*' (ctx:VxV) #42: FILE: drivers/gpu/drm/i915/intel_display.c:10801:
+ pipe_config->pipe_bpp = 12*3;
^
total: 0 errors, 0 warnings, 4 checks, 37 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for series starting with [v3,1/2] drm: drm/i915: Add connector property to limit max bpc
In reply to Radhakrishna Sripada== Series Details ==
== Series Details ==
Series: series starting with [v3,1/2] drm: drm/i915: Add connector property to limit max bpc
URL : https://patchwork.freedesktop.org/series/48695/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4704 -> Patchwork_10015 =
== Summary - SUCCESS ==
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/48695/revisions/1/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_10015:
=== IGT changes ===
==== Warnings ====
{igt@kms_psr@primary_page_flip}:
fi-cnl-psr: DMESG-WARN -> DMESG-FAIL== Known issues ==
Here are the changes found in Patchwork_10015 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@drv_selftest@live_hangcheck:
fi-kbl-guc: PASS -> DMESG-FAIL (fdo#106947)
igt@kms_chamelium@dp-edid-read:
fi-kbl-7500u: PASS -> FAIL (fdo#103841)
igt@kms_frontbuffer_tracking@basic:
{fi-byt-clapper}: PASS -> FAIL (fdo#103167)
igt@kms_pipe_crc_basic@nonblocking-crc-pipe-b:
{fi-byt-clapper}: PASS -> FAIL (fdo#107362)
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
{fi-byt-clapper}: PASS -> FAIL (fdo#107362, fdo#103191)
==== Possible fixes ====
igt@kms_pipe_crc_basic@hang-read-crc-pipe-b:
fi-skl-guc: FAIL (fdo#103191) -> PASS +1
{fi-byt-clapper}: FAIL (fdo#107362, fdo#103191) -> PASS
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
fi-skl-6260u: INCOMPLETE (fdo#104108) -> PASS
{igt@pm_rpm@module-reload}:
fi-cnl-psr: WARN (fdo#107602) -> PASS {name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fdo#103841 https://bugs.freedesktop.org/show_bug.cgi?id=103841
fdo#104108 https://bugs.freedesktop.org/show_bug.cgi?id=104108
fdo#106947 https://bugs.freedesktop.org/show_bug.cgi?id=106947
fdo#107362 https://bugs.freedesktop.org/show_bug.cgi?id=107362
fdo#107602 https://bugs.freedesktop.org/show_bug.cgi?id=107602
== Participating hosts (54 -> 49) ==
Missing (5): fi-ctg-p8600 fi-ilk-m540 fi-byt-squawks fi-bsw-cyan fi-hsw-4200u
== Build changes ==
* Linux: CI_DRM_4704 -> Patchwork_10015
CI_DRM_4704: eb9a20b20d4790be1561235f45e209fba02dc6c0 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4609: 0bc9763af77bbb37f2ed65cc39c398e88db7d8e3 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10015: 7855b6acf8946464612d3eb13a6a65aade8612dd @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
7855b6acf894 drm/i915: Allow "max bpc" property to limit pipe_bpp cf2501ba38fa drm: drm/i915: Add connector property to limit max bpc
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10015/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for series starting with [v3,1/2] drm: drm/i915: Add connector property to limit max bpc
In reply to Radhakrishna Sripada== Series Details ==
== Series Details ==
Series: series starting with [v3,1/2] drm: drm/i915: Add connector property to limit max bpc
URL : https://patchwork.freedesktop.org/series/48695/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4704_full -> Patchwork_10015_full =
== Summary - SUCCESS ==
No regressions found.
== Known issues ==
Here are the changes found in Patchwork_10015_full that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@gem_ctx_isolation@bcs0-s3:
shard-kbl: PASS -> INCOMPLETE (fdo#103665)
igt@gem_exec_await@wide-contexts:
shard-kbl: PASS -> FAIL (fdo#105900)
igt@gem_exec_big:
shard-hsw: PASS -> INCOMPLETE (fdo#103540)
==== Possible fixes ====
igt@kms_cursor_legacy@cursor-vs-flip-toggle:
shard-hsw: FAIL (fdo#103355) -> PASS
igt@kms_setmode@basic:
shard-apl: FAIL (fdo#99912) -> PASS
igt@kms_vblank@pipe-a-ts-continuation-suspend:
shard-hsw: FAIL (fdo#104894) -> PASS fdo#103355 https://bugs.freedesktop.org/show_bug.cgi?id=103355
fdo#103540 https://bugs.freedesktop.org/show_bug.cgi?id=103540
fdo#103665 https://bugs.freedesktop.org/show_bug.cgi?id=103665
fdo#104894 https://bugs.freedesktop.org/show_bug.cgi?id=104894
fdo#105900 https://bugs.freedesktop.org/show_bug.cgi?id=105900
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
== Participating hosts (5 -> 5) ==
No changes in participating hosts
== Build changes ==
* Linux: CI_DRM_4704 -> Patchwork_10015
CI_DRM_4704: eb9a20b20d4790be1561235f45e209fba02dc6c0 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4609: 0bc9763af77bbb37f2ed65cc39c398e88db7d8e3 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10015: 7855b6acf8946464612d3eb13a6a65aade8612dd @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10015/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 20 lines · Radhakrishna Sripada
At times 12bpc HDMI cannot be driven due to faulty cables, dongles level shifters etc. To workaround them we may need to drive the output at a lower bpc. Currently the user space does not have a way to limit the bpc. The default bpc to be programmed is decided by the driver and is run against connector limitations.
Creating a new connector property "max bpc" in order to limit the bpc with which the pixels are scanned out. xrandr can make use of this connector property to make sure that bpc does not exceed the configured value. This property can be used by userspace to set the bpc.
V2: Initialize
max_bpcto satisfykms_properties
V3: Move the property todrm_connectorCc Ville Syrjälä <[email protected]>Cc Kishore Kadiyala <[email protected]>Cc Rodrigo Vivi <[email protected]>Cc Manasi Navare <[email protected]>Cc Stanislav Lisovskiy <[email protected]>Signed-off-by Radhakrishna Sripada <[email protected]>
Quoted 6 lines
--- drivers/gpu/drm/drm_atomic.c | 4 ++++ drivers/gpu/drm/drm_atomic_helper.c | 4 ++++ drivers/gpu/drm/i915/intel_drv.h | 2 ++ drivers/gpu/drm/i915/intel_hdmi.c | 11 +++++++++++ drivers/gpu/drm/i915/intel_modes.c | 20 ++++++++++++++++++++
Pls move all the i915 stuff to the second patch.
Quoted 64 lines
include/drm/drm_connector.h | 6 ++++++ include/drm/drm_mode_config.h | 5 +++++ 7 files changed, 52 insertions(+)drivers/gpu/drm/drm_atomic.c +4
-0@@ -1416,6 +1416,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,return set_out_fence_for_connector (state->state, connector, fence_ptr); + }else if (property == config->max_bpc_property) { + state->max_bpc = val; }else if (connector->funcs->atomic_set_property) {return connector->funcs->atomic_set_property (connector, state, property, val);@@ -1511,6 +1513,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector, *val =0 ; }else if (property == config->writeback_out_fence_ptr_property) { *val =0 ; + }else if (property == config->max_bpc_property) { + *val = state->max_bpc; }else if (connector->funcs->atomic_get_property) {return connector->funcs->atomic_get_property (connector, state, property, val);drivers/gpu/drm/drm_atomic_helper.c +4
-0@@ -638,6 +638,10 @@ drm_atomic_helper_check_modeset(struct drm_device *dev,if (old_connector_state->link_status != new_connector_state->link_status) new_crtc_state->connectors_changed = true; + +if (old_connector_state->max_bpc != + new_connector_state->max_bpc) + new_crtc_state->connectors_changed = true; }if (funcs->atomic_check)drivers/gpu/drm/i915/intel_drv.h +2
-0@@ -1862,6 +1862,8 @@ int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter);void intel_attach_force_audio_property (struct drm_connector *connector);void intel_attach_broadcast_rgb_property (struct drm_connector *connector);void intel_attach_aspect_ratio_property (struct drm_connector *connector); +void intel_attach_max_bpc_property (struct drm_connector *connector,int min,int + max);/* intel_overlay.c */ drivers/gpu/drm/i915/intel_hdmi.c +2
-0@@ -2097,11 +2097,22 @@ static const struct drm_encoder_funcs intel_hdmi_enc_funcs = {static void intel_hdmi_add_properties (struct intel_hdmi *intel_hdmi,struct drm_connector *connector) { +struct drm_i915_private *dev_priv =to_i915 (connector->dev); +
drivers/gpu/drm/i915/intel_hdmi.c static const struct drm_encoder_funcs intel_hdmi_enc_funcs = { · line 2111
Quoted 10 lines
drivers/gpu/drm/i915/intel_hdmi.c +5
-0intel_attach_force_audio_property (connector);intel_attach_broadcast_rgb_property (connector);intel_attach_aspect_ratio_property (connector);drm_connector_attach_content_type_property (connector); connector->state->picture_aspect_ratio =HDMI_PICTURE_ASPECT_NONE ; + +if (IS_G4X (dev_priv) ||IS_VALLEYVIEW (dev_priv) || +IS_CHERRYVIEW (dev_priv)) { +intel_attach_max_bpc_property (connector,8 ,10 ); + connector->state->max_bpc =10 ;
These platforms don't support HDMI deep color. The 10bpc stuff in PIPECONF is for DP. Incidentally DP support seems to be missing from this series.
Quoted 24 lines
drivers/gpu/drm/i915/intel_hdmi.c +4
-0+ }else if (INTEL_GEN (dev_priv) >=5 ) { +intel_attach_max_bpc_property (connector,8 ,12 ); + connector->state->max_bpc =12 ; + } }/* drivers/gpu/drm/i915/intel_modes.c +9
-0@@ -133,3 +133,23 @@ intel_attach_aspect_ratio_property(struct drm_connector *connector) connector->dev->mode_config.aspect_ratio_property, DRM_MODE_PICTURE_ASPECT_NONE); } + +void +intel_attach_max_bpc_property (struct drm_connector *connector,int min,int + max) +{ +struct drm_device *dev = connector->dev; +struct drm_mode_config *config = &dev->mode_config; +struct drm_property *prop; +
drivers/gpu/drm/i915/intel_modes.c intel_attach_aspect_ratio_property(struct drm_connector *connector) · line 154
Quoted 10 lines
drivers/gpu/drm/i915/intel_modes.c +10
-0+ prop = config->max_bpc_property; +if (prop ==NULL ) { + prop =drm_property_create_range (dev,0 ,"max bpc" , min, max); +if (prop ==NULL ) +return ; + + config->max_bpc_property = prop; + } + +drm_object_attach_property (&connector->base, prop, max);
Might make sense to do 'connector->state->max_bpc = max' here. Avoids having to sprinkle it in every driver.
include/drm/drm_connector.h struct drm_connector_state { · line 466
Quoted 13 lines
drivers/gpu/drm/i915/intel_modes.c +1
-0+}include/drm/drm_connector.h +4
-0@@ -460,6 +460,12 @@ struct drm_connector_state {* drm_writeback_signal_completion() */ struct drm_writeback_job *writeback_job; + +/** +* @max_bpc: Connector property to limit the maximum bit depth of +* the pixels being scanned out.
The comment is misleading. It makes me think this has something to do with the pixels we scan out from a framebuffer.
Quoted 23 lines
include/drm/drm_connector.h +2
-0+*/ +unsigned int max_bpc; };/** include/drm/drm_mode_config.h +5
-0@@ -562,6 +562,11 @@ struct drm_mode_config {*/ struct drm_property *link_status_property;/** +* @max_bpc_property: Default connector property for the max bpc to be +* driven out of the connector. +*/ +struct drm_property *max_bpc_property; +/** * @plane_type_property: Default plane property to differentiate * CURSOR, PRIMARY and OVERLAY legacy uses of planes. */ Signature · 1 line
2.9.3
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 28 lines · Ville Syrjälä
Quoted 20 lines · Radhakrishna Sripada
At times 12bpc HDMI cannot be driven due to faulty cables, dongles level shifters etc. To workaround them we may need to drive the output at a lower bpc. Currently the user space does not have a way to limit the bpc. The default bpc to be programmed is decided by the driver and is run against connector limitations.
Creating a new connector property "max bpc" in order to limit the bpc with which the pixels are scanned out. xrandr can make use of this connector property to make sure that bpc does not exceed the configured value. This property can be used by userspace to set the bpc.
V2: Initialize
max_bpcto satisfykms_properties
V3: Move the property todrm_connectorCc Ville Syrjälä <[email protected]>Cc Kishore Kadiyala <[email protected]>Cc Rodrigo Vivi <[email protected]>Cc Manasi Navare <[email protected]>Cc Stanislav Lisovskiy <[email protected]>Signed-off-by Radhakrishna Sripada <[email protected]>Quoted 6 lines
--- drivers/gpu/drm/drm_atomic.c | 4 ++++ drivers/gpu/drm/drm_atomic_helper.c | 4 ++++ drivers/gpu/drm/i915/intel_drv.h | 2 ++ drivers/gpu/drm/i915/intel_hdmi.c | 11 +++++++++++ drivers/gpu/drm/i915/intel_modes.c | 20 ++++++++++++++++++++
Quoted 1 line
Pls move all the i915 stuff to the second patch.
Sure will do it in the next rev.
Quoted 71 lines
Quoted 71 lines
include/drm/drm_connector.h | 6 ++++++ include/drm/drm_mode_config.h | 5 +++++ 7 files changed, 52 insertions(+)drivers/gpu/drm/drm_atomic.c +4
-0@@ -1416,6 +1416,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,return set_out_fence_for_connector (state->state, connector, fence_ptr); + }else if (property == config->max_bpc_property) { + state->max_bpc = val; }else if (connector->funcs->atomic_set_property) {return connector->funcs->atomic_set_property (connector, state, property, val);@@ -1511,6 +1513,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector, *val =0 ; }else if (property == config->writeback_out_fence_ptr_property) { *val =0 ; + }else if (property == config->max_bpc_property) { + *val = state->max_bpc; }else if (connector->funcs->atomic_get_property) {return connector->funcs->atomic_get_property (connector, state, property, val);drivers/gpu/drm/drm_atomic_helper.c +4
-0@@ -638,6 +638,10 @@ drm_atomic_helper_check_modeset(struct drm_device *dev,if (old_connector_state->link_status != new_connector_state->link_status) new_crtc_state->connectors_changed = true; + +if (old_connector_state->max_bpc != + new_connector_state->max_bpc) + new_crtc_state->connectors_changed = true; }if (funcs->atomic_check)drivers/gpu/drm/i915/intel_drv.h +2
-0@@ -1862,6 +1862,8 @@ int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter);void intel_attach_force_audio_property (struct drm_connector *connector);void intel_attach_broadcast_rgb_property (struct drm_connector *connector);void intel_attach_aspect_ratio_property (struct drm_connector *connector); +void intel_attach_max_bpc_property (struct drm_connector *connector,int min,int + max);/* intel_overlay.c */ drivers/gpu/drm/i915/intel_hdmi.c +3
-0@@ -2097,11 +2097,22 @@ static const struct drm_encoder_funcs intel_hdmi_enc_funcs = {static void intel_hdmi_add_properties (struct intel_hdmi *intel_hdmi,struct drm_connector *connector) { +struct drm_i915_private *dev_priv =to_i915 (connector->dev); +intel_attach_force_audio_property (connector);intel_attach_broadcast_rgb_property (connector);intel_attach_aspect_ratio_property (connector);drm_connector_attach_content_type_property (connector); connector->state->picture_aspect_ratio =HDMI_PICTURE_ASPECT_NONE ; +
Quoted 8 lines
drivers/gpu/drm/i915/intel_hdmi.c static const struct drm_encoder_funcs intel_hdmi_enc_funcs = { · line 2111
Quoted 4 lines
drivers/gpu/drm/i915/intel_hdmi.c +4
-0+if (IS_G4X (dev_priv) ||IS_VALLEYVIEW (dev_priv) || +IS_CHERRYVIEW (dev_priv)) { +intel_attach_max_bpc_property (connector,8 ,10 ); + connector->state->max_bpc =10 ;These platforms don't support HDMI deep color. The 10bpc stuff in PIPECONF is for DP. Incidentally DP support seems to be missing from this series.
Limiting this to 8 and removing VLV/CHV to the other case as they support deep color.
Quoted 30 lines
Quoted 30 lines
drivers/gpu/drm/i915/intel_hdmi.c +4
-0+ }else if (INTEL_GEN (dev_priv) >=5 ) { +intel_attach_max_bpc_property (connector,8 ,12 ); + connector->state->max_bpc =12 ; + } }/* drivers/gpu/drm/i915/intel_modes.c +14
-0@@ -133,3 +133,23 @@ intel_attach_aspect_ratio_property(struct drm_connector *connector) connector->dev->mode_config.aspect_ratio_property, DRM_MODE_PICTURE_ASPECT_NONE); } + +void +intel_attach_max_bpc_property (struct drm_connector *connector,int min,int + max) +{ +struct drm_device *dev = connector->dev; +struct drm_mode_config *config = &dev->mode_config; +struct drm_property *prop; + + prop = config->max_bpc_property; +if (prop ==NULL ) { + prop =drm_property_create_range (dev,0 ,"max bpc" , min, max); +if (prop ==NULL ) +return ;
Quoted 8 lines
drivers/gpu/drm/i915/intel_modes.c intel_attach_aspect_ratio_property(struct drm_connector *connector) · line 154
Quoted 5 lines
drivers/gpu/drm/i915/intel_modes.c +5
-0+ + config->max_bpc_property = prop; + } + +drm_object_attach_property (&connector->base, prop, max);Might make sense to do '
connector->state->max_bpc= max' here. Avoids having to sprinkle it in every driver.
Sure will make this change in the next rev.
Quoted 17 lines
Quoted 7 lines
drivers/gpu/drm/i915/intel_modes.c +1
-0+}include/drm/drm_connector.h +0
-0include/drm/drm_connector.h struct drm_connector_state { · line 466
Quoted 7 lines
include/drm/drm_connector.h +4
-0@@ -460,6 +460,12 @@ struct drm_connector_state {* drm_writeback_signal_completion() */ struct drm_writeback_job *writeback_job; + +/** +* @max_bpc: Connector property to limit the maximum bit depth of +* the pixels being scanned out. The comment is misleading. It makes me think this has something to do with the pixels we scan out from a framebuffer.
Will modify this comment in the next rev.
Regards,
Radhakrishna(RK) Sripada
Quoted 16 lines
Quoted 16 lines
include/drm/drm_connector.h +2
-0+*/ +unsigned int max_bpc; };/** include/drm/drm_mode_config.h +2
-0@@ -562,6 +562,11 @@ struct drm_mode_config {*/ struct drm_property *link_status_property;/** +* @max_bpc_property: Default connector property for the max bpc to be +* driven out of the connector.
Quoted 12 lines
Quoted 8 lines
include/drm/drm_mode_config.h +3
-0+*/ +struct drm_property *max_bpc_property; +/** * @plane_type_property: Default plane property to differentiate * CURSOR, PRIMARY and OVERLAY legacy uses of planes. */ Signature · 1 line
2.9.3Signature · 2 lines
Ville Syrjälä Intel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 111 lines · Radhakrishna Sripada
Quoted 28 lines · Ville Syrjälä
Quoted 20 lines · Radhakrishna Sripada
At times 12bpc HDMI cannot be driven due to faulty cables, dongles level shifters etc. To workaround them we may need to drive the output at a lower bpc. Currently the user space does not have a way to limit the bpc. The default bpc to be programmed is decided by the driver and is run against connector limitations.
Creating a new connector property "max bpc" in order to limit the bpc with which the pixels are scanned out. xrandr can make use of this connector property to make sure that bpc does not exceed the configured value. This property can be used by userspace to set the bpc.
V2: Initialize
max_bpcto satisfykms_properties
V3: Move the property todrm_connectorCc Ville Syrjälä <[email protected]>Cc Kishore Kadiyala <[email protected]>Cc Rodrigo Vivi <[email protected]>Cc Manasi Navare <[email protected]>Cc Stanislav Lisovskiy <[email protected]>Signed-off-by Radhakrishna Sripada <[email protected]>Quoted 6 lines
--- drivers/gpu/drm/drm_atomic.c | 4 ++++ drivers/gpu/drm/drm_atomic_helper.c | 4 ++++ drivers/gpu/drm/i915/intel_drv.h | 2 ++ drivers/gpu/drm/i915/intel_hdmi.c | 11 +++++++++++ drivers/gpu/drm/i915/intel_modes.c | 20 ++++++++++++++++++++Quoted 1 line
Pls move all the i915 stuff to the second patch.
Sure will do it in the next rev.
Quoted 71 lines
Quoted 71 lines
include/drm/drm_connector.h | 6 ++++++ include/drm/drm_mode_config.h | 5 +++++ 7 files changed, 52 insertions(+)drivers/gpu/drm/drm_atomic.c +4
-0@@ -1416,6 +1416,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,return set_out_fence_for_connector (state->state, connector, fence_ptr); + }else if (property == config->max_bpc_property) { + state->max_bpc = val; }else if (connector->funcs->atomic_set_property) {return connector->funcs->atomic_set_property (connector, state, property, val);@@ -1511,6 +1513,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector, *val =0 ; }else if (property == config->writeback_out_fence_ptr_property) { *val =0 ; + }else if (property == config->max_bpc_property) { + *val = state->max_bpc; }else if (connector->funcs->atomic_get_property) {return connector->funcs->atomic_get_property (connector, state, property, val);drivers/gpu/drm/drm_atomic_helper.c +4
-0@@ -638,6 +638,10 @@ drm_atomic_helper_check_modeset(struct drm_device *dev,if (old_connector_state->link_status != new_connector_state->link_status) new_crtc_state->connectors_changed = true; + +if (old_connector_state->max_bpc != + new_connector_state->max_bpc) + new_crtc_state->connectors_changed = true; }if (funcs->atomic_check)drivers/gpu/drm/i915/intel_drv.h +2
-0@@ -1862,6 +1862,8 @@ int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter);void intel_attach_force_audio_property (struct drm_connector *connector);void intel_attach_broadcast_rgb_property (struct drm_connector *connector);void intel_attach_aspect_ratio_property (struct drm_connector *connector); +void intel_attach_max_bpc_property (struct drm_connector *connector,int min,int + max);/* intel_overlay.c */ drivers/gpu/drm/i915/intel_hdmi.c +3
-0@@ -2097,11 +2097,22 @@ static const struct drm_encoder_funcs intel_hdmi_enc_funcs = {static void intel_hdmi_add_properties (struct intel_hdmi *intel_hdmi,struct drm_connector *connector) { +struct drm_i915_private *dev_priv =to_i915 (connector->dev); +intel_attach_force_audio_property (connector);intel_attach_broadcast_rgb_property (connector);intel_attach_aspect_ratio_property (connector);drm_connector_attach_content_type_property (connector); connector->state->picture_aspect_ratio =HDMI_PICTURE_ASPECT_NONE ; +Quoted 8 lines
drivers/gpu/drm/i915/intel_hdmi.c static const struct drm_encoder_funcs intel_hdmi_enc_funcs = { · line 2111
Quoted 4 lines
drivers/gpu/drm/i915/intel_hdmi.c +4
-0+if (IS_G4X (dev_priv) ||IS_VALLEYVIEW (dev_priv) || +IS_CHERRYVIEW (dev_priv)) { +intel_attach_max_bpc_property (connector,8 ,10 ); + connector->state->max_bpc =10 ;These platforms don't support HDMI deep color. The 10bpc stuff in PIPECONF is for DP. Incidentally DP support seems to be missing from this series.
Quoted 1 line
Limiting this to 8 and removing VLV/CHV to the other case as they support deep color.
They don't.
Quoted 3 lines
Quoted 3 lines
drivers/gpu/drm/i915/intel_hdmi.c static const struct drm_encoder_funcs intel_hdmi_enc_funcs = { · line 2112
Quoted 3 lines
drivers/gpu/drm/i915/intel_hdmi.c +1
-0+ }else if (INTEL_GEN (dev_priv) >=5 ) {
if (!HAS_GMCH_DISPLAY()) {
...
should be what we want here.
Quoted 87 lines
Quoted 28 lines
Quoted 28 lines
drivers/gpu/drm/i915/intel_hdmi.c +3
-0+intel_attach_max_bpc_property (connector,8 ,12 ); + connector->state->max_bpc =12 ; + } }/* drivers/gpu/drm/i915/intel_modes.c +14
-0@@ -133,3 +133,23 @@ intel_attach_aspect_ratio_property(struct drm_connector *connector) connector->dev->mode_config.aspect_ratio_property, DRM_MODE_PICTURE_ASPECT_NONE); } + +void +intel_attach_max_bpc_property (struct drm_connector *connector,int min,int + max) +{ +struct drm_device *dev = connector->dev; +struct drm_mode_config *config = &dev->mode_config; +struct drm_property *prop; + + prop = config->max_bpc_property; +if (prop ==NULL ) { + prop =drm_property_create_range (dev,0 ,"max bpc" , min, max); +if (prop ==NULL ) +return ;Quoted 8 lines
drivers/gpu/drm/i915/intel_modes.c intel_attach_aspect_ratio_property(struct drm_connector *connector) · line 154
Quoted 5 lines
drivers/gpu/drm/i915/intel_modes.c +5
-0+ + config->max_bpc_property = prop; + } + +drm_object_attach_property (&connector->base, prop, max);Might make sense to do '
connector->state->max_bpc= max' here. Avoids having to sprinkle it in every driver.Sure will make this change in the next rev.
Quoted 17 lines
Quoted 7 lines
drivers/gpu/drm/i915/intel_modes.c +1
-0+}include/drm/drm_connector.h +0
-0include/drm/drm_connector.h struct drm_connector_state { · line 466
Quoted 7 lines
include/drm/drm_connector.h +4
-0@@ -460,6 +460,12 @@ struct drm_connector_state {* drm_writeback_signal_completion() */ struct drm_writeback_job *writeback_job; + +/** +* @max_bpc: Connector property to limit the maximum bit depth of +* the pixels being scanned out. The comment is misleading. It makes me think this has something to do with the pixels we scan out from a framebuffer.
Will modify this comment in the next rev.
Regards,
Radhakrishna(RK) SripadaQuoted 28 lines
Quoted 24 lines
include/drm/drm_connector.h +2
-0+*/ +unsigned int max_bpc; };/** include/drm/drm_mode_config.h +5
-0@@ -562,6 +562,11 @@ struct drm_mode_config {*/ struct drm_property *link_status_property;/** +* @max_bpc_property: Default connector property for the max bpc to be +* driven out of the connector. +*/ +struct drm_property *max_bpc_property; +/** * @plane_type_property: Default plane property to differentiate * CURSOR, PRIMARY and OVERLAY legacy uses of planes. */ Signature · 1 line
2.9.3Signature · 2 lines
Ville Syrjälä Intel
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx