drm/i915/gen11: Implement planar format support.
Subsystems (2)
cover drm/i915/gen11: Implement planar format support.
Gen11 has to program 2 planes to enable planar formats. One scans out the Y plane, the other the UV plane.
The UV plane is the plane that matters for Z-order and performs color correction etc. The Y plane is always sprite 4 or 5, and only feeds Y pixels directly to the chroma upsampler on the UV plane, which will convert it to YUV444 that will be processed further without scaler. If there's no chroma upsampler on a plane, it will be done by a scaler, which needs to know the Y plane to take pixels from.
Maarten Lankhorst (15):
drm/i915: Clean up casts to crtc_state in intel_atomic_commit_tail() drm/i915: Handle cursor updating active_planes correctly. drm/i915: Make intel_crtc_disable_planes() use active planes mask. drm/i915: Replace call to commit_planes_on_crtc with internal update,
v2.
drm/i915: Clean up scaler setup.
drm/i915: Force NV12 coordinates to be a multiple of 2 drm/i915: Unconditionally clear plane_state->visible flag drm/i915/gen11: Enable 6 sprites on gen11
drm/i915/gen11: Link nv12 Y and UV planes in the atomic state, v2. drm/i915/gen11: Handle watermarks correctly for separate Y/UV planes. drm/i915: Move programming plane scaler to its own function. drm/i915/gen11: Program the scalers correctly for planar formats. drm/i915/gen11: Program the chroma upsampler for HDR planes. drm/i915/gen11: Program the Y and UV plane for planar mode correctly. drm/i915/gen11: Expose planar format support on gen11.
drivers/gpu/drm/i915/i915_reg.h | 32 +++- drivers/gpu/drm/i915/intel_atomic.c | 112 +++++++----- drivers/gpu/drm/i915/intel_atomic_plane.c | 155 ++++++++++++----- drivers/gpu/drm/i915/intel_device_info.c | 5 +- drivers/gpu/drm/i915/intel_display.c | 200 ++++++++++++++++------ drivers/gpu/drm/i915/intel_display.h | 3 + drivers/gpu/drm/i915/intel_drv.h | 65 +++++++ drivers/gpu/drm/i915/intel_pm.c | 134 +++++++++------ drivers/gpu/drm/i915/intel_sprite.c | 161 +++++++++++------ 9 files changed, 618 insertions(+), 249 deletions(-)
Signature · 6 lines
2.18.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 1/15 drm/i915: Clean up casts to crtc_state in intel_atomic_commit_tail()
Use old/new_intel_crtc_state, and get rid of all the conversion casts where they don't add anything.
--- drivers/gpu/drm/i915/intel_display.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/intel_display.c +12 -10
@@ -12665,8 +12665,9 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)struct intel_atomic_state *intel_state =to_intel_atomic_state (state);struct drm_i915_private *dev_priv =to_i915 (dev);struct drm_crtc_state *old_crtc_state, *new_crtc_state; +struct intel_crtc_state *new_intel_crtc_state, *old_intel_crtc_state;struct drm_crtc *crtc; -struct intel_crtc_state *intel_cstate; +struct intel_crtc *intel_crtc;u64 put_domains[I915_MAX_PIPES ] = {};int i;
@@ -12678,21 +12679,22 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)intel_display_power_get (dev_priv,POWER_DOMAIN_MODESET );for_each_oldnew_crtc_in_state (state, crtc, old_crtc_state, new_crtc_state, i) { -struct intel_crtc *intel_crtc =to_intel_crtc (crtc); + old_intel_crtc_state =to_intel_crtc_state (old_crtc_state); + new_intel_crtc_state =to_intel_crtc_state (new_crtc_state); + intel_crtc =to_intel_crtc (crtc);if (needs_modeset (new_crtc_state) ||to_intel_crtc_state (new_crtc_state)->update_pipe) { - put_domains[to_intel_crtc (crtc)->pipe] = + put_domains[intel_crtc->pipe] =modeset_get_crtc_power_domains (crtc, -to_intel_crtc_state (new_crtc_state)); + new_intel_crtc_state); }if (!needs_modeset (new_crtc_state))continue ; -intel_pre_plane_update (to_intel_crtc_state (old_crtc_state), -to_intel_crtc_state (new_crtc_state)); +intel_pre_plane_update (old_intel_crtc_state, new_intel_crtc_state);if (old_crtc_state->active) {intel_crtc_disable_planes (crtc, old_crtc_state->plane_mask);
@@ -12703,7 +12705,7 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)*/ intel_crtc_disable_pipe_crc (intel_crtc); - dev_priv->display.crtc_disable (to_intel_crtc_state (old_crtc_state), state); + dev_priv->display.crtc_disable (old_intel_crtc_state, state); intel_crtc->active = false;intel_fbc_disable (intel_crtc);intel_disable_shared_dpll (intel_crtc);
@@ -12724,7 +12726,7 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)*/ if (INTEL_GEN (dev_priv) >=9 ) dev_priv->display.initial_watermarks (intel_state, -to_intel_crtc_state (new_crtc_state)); + new_intel_crtc_state); } } }
@@ -12784,11 +12786,11 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)* TODO: Move this (and other cleanup) to an async worker eventually. */ for_each_new_crtc_in_state (state, crtc, new_crtc_state, i) { - intel_cstate =to_intel_crtc_state (new_crtc_state); + new_intel_crtc_state =to_intel_crtc_state (new_crtc_state);if (dev_priv->display.optimize_watermarks) dev_priv->display.optimize_watermarks (intel_state, - intel_cstate); + new_intel_crtc_state); }for_each_oldnew_crtc_in_state (state, crtc, old_crtc_state, new_crtc_state, i) {
Signature · 6 lines
2.18.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 01/15] drm/i915: Clean up casts to crtc_state in intel_atomic_commit_tail()
Quoted 24 lines · Maarten Lankhorst
Use old/new_intel_crtc_state, and get rid of all the conversion casts where they don't add anything.
Signed-off-by Maarten Lankhorst <[email protected]>--- drivers/gpu/drm/i915/intel_display.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-)drivers/gpu/drm/i915/intel_display.c +2
-1@@ -12665,8 +12665,9 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)struct intel_atomic_state *intel_state =to_intel_atomic_state (state);struct drm_i915_private *dev_priv =to_i915 (dev);struct drm_crtc_state *old_crtc_state, *new_crtc_state; +struct intel_crtc_state *new_intel_crtc_state, *old_intel_crtc_state;struct drm_crtc *crtc; -struct intel_crtc_state *intel_cstate; +struct intel_crtc *intel_crtc;u64 put_domains[I915_MAX_PIPES ] = {};int i;
drivers/gpu/drm/i915/intel_display.c static void intel_atomic_commit_tail(struct drm_atomic_state *state) · line 12681
Quoted 3 lines
drivers/gpu/drm/i915/intel_display.c +0
-0@@ -12678,21 +12679,22 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)intel_display_power_get (dev_priv,POWER_DOMAIN_MODESET );for_each_oldnew_crtc_in_state (state, crtc, old_crtc_state, new_crtc_state, i) {
It looks like we have a for_each_oldnew_intel_plane_in_state, but not a for_each_oldnew_intel_crtc_in_state yet. If we added the Intel-specific iterator, then we could simplify this function a bit further by dropping the base versions of crtc, old_crtc_state, and new_crtc_state here and renaming the Intel-specific subtypes. I believe Ville mentioned that on the other thread.
Anyway, the general cleanup here looks fine, so
even if you decide to defer further cleanup viafor_each_oldnew_intel_crtc_in_state to later.
Matt
Quoted 63 lines
drivers/gpu/drm/i915/intel_display.c +10
-9-struct intel_crtc *intel_crtc =to_intel_crtc (crtc); + old_intel_crtc_state =to_intel_crtc_state (old_crtc_state); + new_intel_crtc_state =to_intel_crtc_state (new_crtc_state); + intel_crtc =to_intel_crtc (crtc);if (needs_modeset (new_crtc_state) ||to_intel_crtc_state (new_crtc_state)->update_pipe) { - put_domains[to_intel_crtc (crtc)->pipe] = + put_domains[intel_crtc->pipe] =modeset_get_crtc_power_domains (crtc, -to_intel_crtc_state (new_crtc_state)); + new_intel_crtc_state); }if (!needs_modeset (new_crtc_state))continue ; -intel_pre_plane_update (to_intel_crtc_state (old_crtc_state), -to_intel_crtc_state (new_crtc_state)); +intel_pre_plane_update (old_intel_crtc_state, new_intel_crtc_state);if (old_crtc_state->active) {intel_crtc_disable_planes (crtc, old_crtc_state->plane_mask);@@ -12703,7 +12705,7 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)*/ intel_crtc_disable_pipe_crc (intel_crtc); - dev_priv->display.crtc_disable (to_intel_crtc_state (old_crtc_state), state); + dev_priv->display.crtc_disable (old_intel_crtc_state, state); intel_crtc->active = false;intel_fbc_disable (intel_crtc);intel_disable_shared_dpll (intel_crtc);@@ -12724,7 +12726,7 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)*/ if (INTEL_GEN (dev_priv) >=9 ) dev_priv->display.initial_watermarks (intel_state, -to_intel_crtc_state (new_crtc_state)); + new_intel_crtc_state); } } }@@ -12784,11 +12786,11 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)* TODO: Move this (and other cleanup) to an async worker eventually. */ for_each_new_crtc_in_state (state, crtc, new_crtc_state, i) { - intel_cstate =to_intel_crtc_state (new_crtc_state); + new_intel_crtc_state =to_intel_crtc_state (new_crtc_state);if (dev_priv->display.optimize_watermarks) dev_priv->display.optimize_watermarks (intel_state, - intel_cstate); + new_intel_crtc_state); }for_each_oldnew_crtc_in_state (state, crtc, old_crtc_state, new_crtc_state, i) {Signature · 6 lines
2.18.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 9 lines
Matt Roper Graphics Software Engineer IoTG Platform Enabling & Development Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/15 drm/i915: Handle cursor updating active_planes correctly.
In reply to Maarten LankhorstWhile we may not update new_crtc_state, we may clear active_planes if the new cursor update state will disable the cursor, but we fail after. If this is immediately followed by a modeset disable, we may soon not disable the planes correctly when we start depending on active_planes.
--- drivers/gpu/drm/i915/intel_display.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/intel_display.c +17 -8
@@ -13517,14 +13517,16 @@ intel_legacy_cursor_update(struct drm_plane *plane,struct drm_plane_state *old_plane_state, *new_plane_state;struct intel_plane *intel_plane =to_intel_plane (plane);struct drm_framebuffer *old_fb; -struct drm_crtc_state *crtc_state = crtc->state; +struct intel_crtc_state *crtc_state = +to_intel_crtc_state (crtc->state); +struct intel_crtc_state *new_crtc_state;/* * When crtc is inactive or there is a modeset pending, * wait for it to complete in the slowpath */ -if (!crtc_state->active ||needs_modeset (crtc_state) || -to_intel_crtc_state (crtc_state)->update_pipe) +if (!crtc_state->base.active ||needs_modeset (&crtc_state->base) || + crtc_state->update_pipe) goto slow; old_plane_state = plane->state;
@@ -13554,6 +13556,12 @@ intel_legacy_cursor_update(struct drm_plane *plane,if (!new_plane_state)return -ENOMEM ; + new_crtc_state =to_intel_crtc_state (intel_crtc_duplicate_state (crtc)); +if (!new_crtc_state) { + ret = -ENOMEM ; + goto out_free; + } +drm_atomic_set_fb_for_plane (new_plane_state, fb); new_plane_state->src_x = src_x;
@@ -13565,9 +13573,8 @@ intel_legacy_cursor_update(struct drm_plane *plane, new_plane_state->crtc_w = crtc_w; new_plane_state->crtc_h = crtc_h; - ret =intel_plane_atomic_check_with_state (to_intel_crtc_state (crtc->state), -to_intel_crtc_state (crtc->state),/* FIXME need a new crtc state? */ -to_intel_plane_state (plane->state), + ret =intel_plane_atomic_check_with_state (crtc_state, new_crtc_state, +to_intel_plane_state (old_plane_state),to_intel_plane_state (new_plane_state));if (ret) goto out_free;
@@ -13588,11 +13595,11 @@ intel_legacy_cursor_update(struct drm_plane *plane,/* Swap plane state */ plane->state = new_plane_state; + crtc_state->active_planes = new_crtc_state->active_planes;if (plane->state->visible) {trace_intel_update_plane (plane,to_intel_crtc (crtc)); - intel_plane->update_plane (intel_plane, -to_intel_crtc_state (crtc->state), + intel_plane->update_plane (intel_plane, crtc_state,to_intel_plane_state (plane->state)); }else {trace_intel_disable_plane (plane,to_intel_crtc (crtc));
@@ -13604,6 +13611,8 @@ intel_legacy_cursor_update(struct drm_plane *plane, out_unlock:mutex_unlock (&dev_priv->drm.struct_mutex); out_free: +if (new_crtc_state) +intel_crtc_destroy_state (crtc, &new_crtc_state->base);if (ret)intel_plane_destroy_state (plane, new_plane_state);else
Signature · 6 lines
2.18.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 02/15] drm/i915: Handle cursor updating active_planes correctly.
Quoted 7 lines · Maarten Lankhorst
While we may not update
new_crtc_state, we may clearactive_planesif the new cursor update state will disable the cursor, but we fail after. If this is immediately followed by a modeset disable, we may soon not disable the planes correctly when we start depending onactive_planes.Signed-off-by Maarten Lankhorst <[email protected]>
intel_plane_atomic_check_with_state()")
I think? So basically we were clobbering the current cstate's active_planes field (and anything else in cstate that intel_plane_atomic_check_with_state() might touch in the future) if the atomic transaction failed.
Quoted 54 lines
--- drivers/gpu/drm/i915/intel_display.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-)drivers/gpu/drm/i915/intel_display.c +13
-6@@ -13517,14 +13517,16 @@ intel_legacy_cursor_update(struct drm_plane *plane,struct drm_plane_state *old_plane_state, *new_plane_state;struct intel_plane *intel_plane =to_intel_plane (plane);struct drm_framebuffer *old_fb; -struct drm_crtc_state *crtc_state = crtc->state; +struct intel_crtc_state *crtc_state = +to_intel_crtc_state (crtc->state); +struct intel_crtc_state *new_crtc_state;/* * When crtc is inactive or there is a modeset pending, * wait for it to complete in the slowpath */ -if (!crtc_state->active ||needs_modeset (crtc_state) || -to_intel_crtc_state (crtc_state)->update_pipe) +if (!crtc_state->base.active ||needs_modeset (&crtc_state->base) || + crtc_state->update_pipe) goto slow; old_plane_state = plane->state;@@ -13554,6 +13556,12 @@ intel_legacy_cursor_update(struct drm_plane *plane,if (!new_plane_state)return -ENOMEM ; + new_crtc_state =to_intel_crtc_state (intel_crtc_duplicate_state (crtc)); +if (!new_crtc_state) { + ret = -ENOMEM ; + goto out_free; + } +drm_atomic_set_fb_for_plane (new_plane_state, fb); new_plane_state->src_x = src_x;@@ -13565,9 +13573,8 @@ intel_legacy_cursor_update(struct drm_plane *plane, new_plane_state->crtc_w = crtc_w; new_plane_state->crtc_h = crtc_h; - ret =intel_plane_atomic_check_with_state (to_intel_crtc_state (crtc->state), -to_intel_crtc_state (crtc->state),/* FIXME need a new crtc state? */ -to_intel_plane_state (plane->state), + ret =intel_plane_atomic_check_with_state (crtc_state, new_crtc_state, +to_intel_plane_state (old_plane_state),to_intel_plane_state (new_plane_state));if (ret) goto out_free;
drivers/gpu/drm/i915/intel_display.c intel_legacy_cursor_update(struct drm_plane *plane, · line 13598
Quoted 4 lines
drivers/gpu/drm/i915/intel_display.c +1
-0@@ -13588,11 +13595,11 @@ intel_legacy_cursor_update(struct drm_plane *plane,/* Swap plane state */ plane->state = new_plane_state; + crtc_state->active_planes = new_crtc_state->active_planes;
At the moment this is the only crtc_state field that our plane check might update for a cursor, but is there a reason why we don't just swap in the new state and destroy the old one farther down? If our driver ever did start updating other fields, it would be really easy to overlook the need to copy those new fields over here. I realize a lot of the likely candidates for fields that plane check might want to update (e.g., watermark stuff) would also disqualify us from taking this legacy cursor fastpath in the first place, but I'm a bit nervous about assuming that we'll never be updating any other fields at all.
Matt
Quoted 25 lines
drivers/gpu/drm/i915/intel_display.c +3
-2if (plane->state->visible) {trace_intel_update_plane (plane,to_intel_crtc (crtc)); - intel_plane->update_plane (intel_plane, -to_intel_crtc_state (crtc->state), + intel_plane->update_plane (intel_plane, crtc_state,to_intel_plane_state (plane->state)); }else {trace_intel_disable_plane (plane,to_intel_crtc (crtc));@@ -13604,6 +13611,8 @@ intel_legacy_cursor_update(struct drm_plane *plane, out_unlock:mutex_unlock (&dev_priv->drm.struct_mutex); out_free: +if (new_crtc_state) +intel_crtc_destroy_state (crtc, &new_crtc_state->base);if (ret)intel_plane_destroy_state (plane, new_plane_state);else Signature · 6 lines
2.18.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 9 lines
Matt Roper Graphics Software Engineer IoTG Platform Enabling & Development Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 02/15] drm/i915: Handle cursor updating active_planes correctly.
Op 20-09-18 om 02:12 schreef Matt Roper:
Quoted 7 lines · Maarten Lankhorst
Quoted 6 lines
While we may not update
new_crtc_state, we may clearactive_planesif the new cursor update state will disable the cursor, but we fail after. If this is immediately followed by a modeset disable, we may soon not disable the planes correctly when we start depending onactive_planes.
Quoted 8 lines
Quoted 1 line
Signed-off-by Maarten Lankhorst <[email protected]>Fixes b2b55502d683c ("drm/i915: Pass proper old/new states to
intel_plane_atomic_check_with_state()")I think? So basically we were clobbering the current cstate's
active_planesfield (and anything else in cstate thatintel_plane_atomic_check_with_state()might touch in the future) if the atomic transaction failed.
This is in theory a fix, but up until now we don't depend on it. It only starts mattering further down where we start to updating/disabling planes based on this field.
This is why I didn't add -fixes.
Quoted 55 lines
Quoted 55 lines
--- drivers/gpu/drm/i915/intel_display.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-)drivers/gpu/drm/i915/intel_display.c +13
-6@@ -13517,14 +13517,16 @@ intel_legacy_cursor_update(struct drm_plane *plane,struct drm_plane_state *old_plane_state, *new_plane_state;struct intel_plane *intel_plane =to_intel_plane (plane);struct drm_framebuffer *old_fb; -struct drm_crtc_state *crtc_state = crtc->state; +struct intel_crtc_state *crtc_state = +to_intel_crtc_state (crtc->state); +struct intel_crtc_state *new_crtc_state;/* * When crtc is inactive or there is a modeset pending, * wait for it to complete in the slowpath */ -if (!crtc_state->active ||needs_modeset (crtc_state) || -to_intel_crtc_state (crtc_state)->update_pipe) +if (!crtc_state->base.active ||needs_modeset (&crtc_state->base) || + crtc_state->update_pipe) goto slow; old_plane_state = plane->state;@@ -13554,6 +13556,12 @@ intel_legacy_cursor_update(struct drm_plane *plane,if (!new_plane_state)return -ENOMEM ; + new_crtc_state =to_intel_crtc_state (intel_crtc_duplicate_state (crtc)); +if (!new_crtc_state) { + ret = -ENOMEM ; + goto out_free; + } +drm_atomic_set_fb_for_plane (new_plane_state, fb); new_plane_state->src_x = src_x;@@ -13565,9 +13573,8 @@ intel_legacy_cursor_update(struct drm_plane *plane, new_plane_state->crtc_w = crtc_w; new_plane_state->crtc_h = crtc_h; - ret =intel_plane_atomic_check_with_state (to_intel_crtc_state (crtc->state), -to_intel_crtc_state (crtc->state),/* FIXME need a new crtc state? */ -to_intel_plane_state (plane->state), + ret =intel_plane_atomic_check_with_state (crtc_state, new_crtc_state, +to_intel_plane_state (old_plane_state),to_intel_plane_state (new_plane_state));if (ret) goto out_free;@@ -13588,11 +13595,11 @@ intel_legacy_cursor_update(struct drm_plane *plane,
Quoted 12 lines
drivers/gpu/drm/i915/intel_display.c intel_legacy_cursor_update(struct drm_plane *plane, · line 13598
Quoted 3 lines
drivers/gpu/drm/i915/intel_display.c +1
-0/* Swap plane state */ plane->state = new_plane_state; + crtc_state->active_planes = new_crtc_state->active_planes;At the moment this is the only
crtc_statefield that our plane check might update for a cursor, but is there a reason why we don't just swap in the new state and destroy the old one farther down? If our driver ever did start updating other fields, it would be really easy to overlook the need to copy those new fields over here. I realize a lot of the likely candidates for fields that plane check might want to update (e.g., watermark stuff) would also disqualify us from taking this legacy cursor fastpath in the first place, but I'm a bit nervous about assuming that we'll never be updating any other fields at all.
I wish! This was what I first tried. Then realized it was a very very bad idea. We wait for plane_state->hw_done to be set, but an atomic update may be in progress. In which case our old_crtc_state is its new_crtc_state.
If we start freeing that.. really bad things happen. (TM)
I'll add a comment here to explain why we only update crtc_state.
In theory it could be a problem that we update crtc_state->active_planes life, but the place that will depend on it checks if the plane is part of the atomic commit, and we ruled out that's the case. So even if we change it, either value will cause the same behavior when running the atomic plane update part. We've already ruled out modesets, so we won't race with disabling all planes.
~Maarten
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 3/15 drm/i915: Make intel_crtc_disable_planes() use active planes mask.
In reply to Maarten LankhorstThis will only disable planes we actually had marked as visible in crtc_state->visible_planes and cleans up intel_crtc_disable_plane() slightly.
This is also useful for when we start enabling NV12 support, in which we will make the separate Y plane visible, but ignore the Y plane's state.
--- drivers/gpu/drm/i915/intel_display.c | 29 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 15 deletions(-)
drivers/gpu/drm/i915/intel_display.c +14 -15
@@ -5402,24 +5402,23 @@ static void intel_pre_plane_update(struct intel_crtc_state *old_crtc_state,intel_update_watermarks (crtc); } -static void intel_crtc_disable_planes (struct drm_crtc *crtc,unsigned plane_mask) +static void intel_crtc_disable_planes (struct intel_crtc *crtc,unsigned plane_mask) { -struct drm_device *dev = crtc->dev; -struct intel_crtc *intel_crtc =to_intel_crtc (crtc); -struct drm_plane *p; -int pipe = intel_crtc->pipe; +struct drm_device *dev = crtc->base.dev; +struct intel_plane *plane; +unsigned fb_bits =0 ; -intel_crtc_dpms_overlay_disable (intel_crtc); +intel_crtc_dpms_overlay_disable (crtc); -drm_for_each_plane_mask (p, dev, plane_mask) -to_intel_plane (p)->disable_plane (to_intel_plane (p), intel_crtc); +for_each_intel_plane_on_crtc (dev, crtc, plane) { +if (plane_mask &BIT (plane->id)) { + plane->disable_plane (plane, crtc); -/* -* FIXME: Once we grow proper nuclear flip support out of this we need -* to compute the mask of flip planes precisely. For the time being -* consider this a flip to a NULL plane. -*/ -intel_frontbuffer_flip (to_i915 (dev),INTEL_FRONTBUFFER_ALL_MASK (pipe)); + fb_bits |= plane->frontbuffer_bit; + } + } + +intel_frontbuffer_flip (to_i915 (dev), fb_bits); } static void intel_encoders_pre_pll_enable(struct drm_crtc *crtc,
@@ -12697,7 +12696,7 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)intel_pre_plane_update (old_intel_crtc_state, new_intel_crtc_state);if (old_crtc_state->active) { -intel_crtc_disable_planes (crtc, old_crtc_state->plane_mask); +intel_crtc_disable_planes (intel_crtc, old_intel_crtc_state->active_planes);/* * We need to disable pipe CRC before disabling the pipe,
Signature · 6 lines
2.18.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 03/15] drm/i915: Make intel_crtc_disable_planes() use active planes mask.
Quoted 8 lines · Maarten Lankhorst
This will only disable planes we actually had marked as visible in
crtc_state->visible_planesand cleans upintel_crtc_disable_plane()slightly.This is also useful for when we start enabling NV12 support, in which we will make the separate Y plane visible, but ignore the Y plane's state.
Signed-off-by Maarten Lankhorst <[email protected]>
Quoted 62 lines
--- drivers/gpu/drm/i915/intel_display.c | 29 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 15 deletions(-)drivers/gpu/drm/i915/intel_display.c +14
-15@@ -5402,24 +5402,23 @@ static void intel_pre_plane_update(struct intel_crtc_state *old_crtc_state,intel_update_watermarks (crtc); } -static void intel_crtc_disable_planes (struct drm_crtc *crtc,unsigned plane_mask) +static void intel_crtc_disable_planes (struct intel_crtc *crtc,unsigned plane_mask) { -struct drm_device *dev = crtc->dev; -struct intel_crtc *intel_crtc =to_intel_crtc (crtc); -struct drm_plane *p; -int pipe = intel_crtc->pipe; +struct drm_device *dev = crtc->base.dev; +struct intel_plane *plane; +unsigned fb_bits =0 ; -intel_crtc_dpms_overlay_disable (intel_crtc); +intel_crtc_dpms_overlay_disable (crtc); -drm_for_each_plane_mask (p, dev, plane_mask) -to_intel_plane (p)->disable_plane (to_intel_plane (p), intel_crtc); +for_each_intel_plane_on_crtc (dev, crtc, plane) { +if (plane_mask &BIT (plane->id)) { + plane->disable_plane (plane, crtc); -/* -* FIXME: Once we grow proper nuclear flip support out of this we need -* to compute the mask of flip planes precisely. For the time being -* consider this a flip to a NULL plane. -*/ -intel_frontbuffer_flip (to_i915 (dev),INTEL_FRONTBUFFER_ALL_MASK (pipe)); + fb_bits |= plane->frontbuffer_bit; + } + } + +intel_frontbuffer_flip (to_i915 (dev), fb_bits); } static void intel_encoders_pre_pll_enable(struct drm_crtc *crtc,@@ -12697,7 +12696,7 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)intel_pre_plane_update (old_intel_crtc_state, new_intel_crtc_state);if (old_crtc_state->active) { -intel_crtc_disable_planes (crtc, old_crtc_state->plane_mask); +intel_crtc_disable_planes (intel_crtc, old_intel_crtc_state->active_planes);/* * We need to disable pipe CRC before disabling the pipe, Signature · 6 lines
2.18.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 9 lines
Matt Roper Graphics Software Engineer IoTG Platform Enabling & Development Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 4/15 drm/i915: Replace call to commit_planes_on_crtc with internal update, v2.
In reply to Maarten Lankhorstdrm_atomic_helper_commit_planes_on_crtc calls begin_commit, then plane_update hooks, then flush_commit. Because we keep our own visibility tracking through plane_state->visible there's no need to rely on the atomic hooks for this.
By explicitly writing our own helper, we can update visible planes as needed, which is useful to make NV12 support work as intended.
Changes since v1:
- Reword commit message. (Matt Roper)
- Rename to intel_update_planes_on_crtc(). (Matt)
--- drivers/gpu/drm/i915/intel_atomic_plane.c | 41 ++++++++++++----------- drivers/gpu/drm/i915/intel_display.c | 10 ++++-- drivers/gpu/drm/i915/intel_drv.h | 4 +++ 3 files changed, 33 insertions(+), 22 deletions(-)
drivers/gpu/drm/i915/intel_atomic_plane.c +22 -19
@@ -164,29 +164,33 @@ static int intel_plane_atomic_check(struct drm_plane *plane, to_intel_plane_state(new_plane_state)); } -static void intel_plane_atomic_update (struct drm_plane *plane, -struct drm_plane_state *old_state) +void intel_update_planes_on_crtc (struct intel_atomic_state *old_state, +struct intel_crtc *crtc, +struct intel_crtc_state *old_crtc_state, +struct intel_crtc_state *new_crtc_state) { -struct intel_atomic_state *state =to_intel_atomic_state (old_state->state); -struct intel_plane *intel_plane =to_intel_plane (plane); -const struct intel_plane_state *new_plane_state = -intel_atomic_get_new_plane_state (state, intel_plane); -struct drm_crtc *crtc = new_plane_state->base.crtc ?: old_state->crtc; +struct intel_plane_state *new_plane_state; +struct intel_plane *plane; +u32 update_mask; +int i; + + update_mask = old_crtc_state->active_planes; + update_mask |= new_crtc_state->active_planes; -if (new_plane_state->base.visible) { -const struct intel_crtc_state *new_crtc_state = -intel_atomic_get_new_crtc_state (state,to_intel_crtc (crtc)); +for_each_new_intel_plane_in_state (old_state, plane, new_plane_state, i) { +if (crtc->pipe != plane->pipe || + !(update_mask &BIT (plane->id))) +continue ; -trace_intel_update_plane (plane, -to_intel_crtc (crtc)); +if (new_plane_state->base.visible) { +trace_intel_update_plane (&plane->base, crtc); - intel_plane->update_plane (intel_plane, - new_crtc_state, new_plane_state); - }else { -trace_intel_disable_plane (plane, -to_intel_crtc (crtc)); + plane->update_plane (plane, new_crtc_state, new_plane_state); + }else { +trace_intel_disable_plane (&plane->base, crtc); - intel_plane->disable_plane (intel_plane,to_intel_crtc (crtc)); + plane->disable_plane (plane, crtc); + } } }
@@ -194,7 +198,6 @@ const struct drm_plane_helper_funcs intel_plane_helper_funcs = { .prepare_fb = intel_prepare_plane_fb, .cleanup_fb = intel_cleanup_plane_fb, .atomic_check = intel_plane_atomic_check, - .atomic_update = intel_plane_atomic_update, };/**
drivers/gpu/drm/i915/intel_display.c +7 -3
@@ -10813,8 +10813,6 @@ static int intel_crtc_atomic_check(struct drm_crtc *crtc, }static const struct drm_crtc_helper_funcs intel_helper_funcs = { - .atomic_begin = intel_begin_crtc_commit, - .atomic_flush = intel_finish_crtc_commit, .atomic_check = intel_crtc_atomic_check, };
@@ -12483,6 +12481,7 @@ static void intel_update_crtc(struct drm_crtc *crtc,struct drm_device *dev = crtc->dev;struct drm_i915_private *dev_priv =to_i915 (dev);struct intel_crtc *intel_crtc =to_intel_crtc (crtc); +struct intel_crtc_state *old_intel_cstate =to_intel_crtc_state (old_crtc_state);struct intel_crtc_state *pipe_config =to_intel_crtc_state (new_crtc_state);bool modeset =needs_modeset (new_crtc_state); struct intel_plane_state *new_plane_state =
@@ -12503,7 +12502,12 @@ static void intel_update_crtc(struct drm_crtc *crtc,if (new_plane_state)intel_fbc_enable (intel_crtc, pipe_config, new_plane_state); -drm_atomic_helper_commit_planes_on_crtc (old_crtc_state); +intel_begin_crtc_commit (crtc, old_crtc_state); + +intel_update_planes_on_crtc (to_intel_atomic_state (state), intel_crtc, + old_intel_cstate, pipe_config); + +intel_finish_crtc_commit (crtc, old_crtc_state); }static void intel_update_crtcs (struct drm_atomic_state *state)
drivers/gpu/drm/i915/intel_drv.h +4 -0
@@ -2188,6 +2188,10 @@ struct drm_plane_state *intel_plane_duplicate_state(struct drm_plane *plane);void intel_plane_destroy_state (struct drm_plane *plane,struct drm_plane_state *state);extern const struct drm_plane_helper_funcs intel_plane_helper_funcs; +void intel_update_planes_on_crtc (struct intel_atomic_state *old_state, +struct intel_crtc *crtc, +struct intel_crtc_state *old_crtc_state, +struct intel_crtc_state *new_crtc_state); int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_state, struct intel_crtc_state *crtc_state, const struct intel_plane_state *old_plane_state,
Signature · 6 lines
2.18.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 04/15] drm/i915: Replace call to commit_planes_on_crtc with internal update, v2.
Quoted 5 lines · Maarten Lankhorst
drm_atomic_helper_commit_planes_on_crtccallsbegin_commit, thenplane_updatehooks, thenflush_commit. Because we keep our own visibility tracking throughplane_state->visiblethere's no need to rely on the atomic hooks for this.
Quoted 8 lines
By explicitly writing our own helper, we can update visible planes as needed, which is useful to make NV12 support work as intended.
Changes since v1:
- Reword commit message. (Matt Roper)
- Rename tointel_update_planes_on_crtc(). (Matt)Signed-off-by Maarten Lankhorst <[email protected]>
This patch does leave drm_atomic_helper_commit_planes_on_crtc() unused by any driver. Not sure if we need to follow up with a patch to remove it as dead code, or whether we anticipate other drivers wanting to use it soon.
Matt
Quoted 127 lines
--- drivers/gpu/drm/i915/intel_atomic_plane.c | 41 ++++++++++++----------- drivers/gpu/drm/i915/intel_display.c | 10 ++++-- drivers/gpu/drm/i915/intel_drv.h | 4 +++ 3 files changed, 33 insertions(+), 22 deletions(-)drivers/gpu/drm/i915/intel_atomic_plane.c +22
-19@@ -164,29 +164,33 @@ static int intel_plane_atomic_check(struct drm_plane *plane, to_intel_plane_state(new_plane_state)); } -static void intel_plane_atomic_update (struct drm_plane *plane, -struct drm_plane_state *old_state) +void intel_update_planes_on_crtc (struct intel_atomic_state *old_state, +struct intel_crtc *crtc, +struct intel_crtc_state *old_crtc_state, +struct intel_crtc_state *new_crtc_state) { -struct intel_atomic_state *state =to_intel_atomic_state (old_state->state); -struct intel_plane *intel_plane =to_intel_plane (plane); -const struct intel_plane_state *new_plane_state = -intel_atomic_get_new_plane_state (state, intel_plane); -struct drm_crtc *crtc = new_plane_state->base.crtc ?: old_state->crtc; +struct intel_plane_state *new_plane_state; +struct intel_plane *plane; +u32 update_mask; +int i; + + update_mask = old_crtc_state->active_planes; + update_mask |= new_crtc_state->active_planes; -if (new_plane_state->base.visible) { -const struct intel_crtc_state *new_crtc_state = -intel_atomic_get_new_crtc_state (state,to_intel_crtc (crtc)); +for_each_new_intel_plane_in_state (old_state, plane, new_plane_state, i) { +if (crtc->pipe != plane->pipe || + !(update_mask &BIT (plane->id))) +continue ; -trace_intel_update_plane (plane, -to_intel_crtc (crtc)); +if (new_plane_state->base.visible) { +trace_intel_update_plane (&plane->base, crtc); - intel_plane->update_plane (intel_plane, - new_crtc_state, new_plane_state); - }else { -trace_intel_disable_plane (plane, -to_intel_crtc (crtc)); + plane->update_plane (plane, new_crtc_state, new_plane_state); + }else { +trace_intel_disable_plane (&plane->base, crtc); - intel_plane->disable_plane (intel_plane,to_intel_crtc (crtc)); + plane->disable_plane (plane, crtc); + } } }@@ -194,7 +198,6 @@ const struct drm_plane_helper_funcs intel_plane_helper_funcs = { .prepare_fb = intel_prepare_plane_fb, .cleanup_fb = intel_cleanup_plane_fb, .atomic_check = intel_plane_atomic_check, - .atomic_update = intel_plane_atomic_update, };/** drivers/gpu/drm/i915/intel_display.c +7
-3@@ -10813,8 +10813,6 @@ static int intel_crtc_atomic_check(struct drm_crtc *crtc, }static const struct drm_crtc_helper_funcs intel_helper_funcs = { - .atomic_begin = intel_begin_crtc_commit, - .atomic_flush = intel_finish_crtc_commit, .atomic_check = intel_crtc_atomic_check, };@@ -12483,6 +12481,7 @@ static void intel_update_crtc(struct drm_crtc *crtc,struct drm_device *dev = crtc->dev;struct drm_i915_private *dev_priv =to_i915 (dev);struct intel_crtc *intel_crtc =to_intel_crtc (crtc); +struct intel_crtc_state *old_intel_cstate =to_intel_crtc_state (old_crtc_state);struct intel_crtc_state *pipe_config =to_intel_crtc_state (new_crtc_state);bool modeset =needs_modeset (new_crtc_state); struct intel_plane_state *new_plane_state =@@ -12503,7 +12502,12 @@ static void intel_update_crtc(struct drm_crtc *crtc,if (new_plane_state)intel_fbc_enable (intel_crtc, pipe_config, new_plane_state); -drm_atomic_helper_commit_planes_on_crtc (old_crtc_state); +intel_begin_crtc_commit (crtc, old_crtc_state); + +intel_update_planes_on_crtc (to_intel_atomic_state (state), intel_crtc, + old_intel_cstate, pipe_config); + +intel_finish_crtc_commit (crtc, old_crtc_state); }static void intel_update_crtcs (struct drm_atomic_state *state)drivers/gpu/drm/i915/intel_drv.h +4
-0@@ -2188,6 +2188,10 @@ struct drm_plane_state *intel_plane_duplicate_state(struct drm_plane *plane);void intel_plane_destroy_state (struct drm_plane *plane,struct drm_plane_state *state);extern const struct drm_plane_helper_funcs intel_plane_helper_funcs; +void intel_update_planes_on_crtc (struct intel_atomic_state *old_state, +struct intel_crtc *crtc, +struct intel_crtc_state *old_crtc_state, +struct intel_crtc_state *new_crtc_state); int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_state, struct intel_crtc_state *crtc_state, const struct intel_plane_state *old_plane_state,Signature · 6 lines
2.18.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 9 lines
Matt Roper Graphics Software Engineer IoTG Platform Enabling & Development Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 5/15 drm/i915: Clean up scaler setup.
In reply to Maarten LankhorstOn skylake we can switch to a high quality scaler mode when only 1 out of 2 scalers are used, but on GLK and later bit 28 has a different meaning. Don't set it, and make clear the distinction between SKL and later PS values.
--- drivers/gpu/drm/i915/i915_reg.h | 7 +- drivers/gpu/drm/i915/intel_atomic.c | 108 +++++++++++++++------------ drivers/gpu/drm/i915/intel_display.c | 2 +- 3 files changed, 66 insertions(+), 51 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +4 -3
@@ -6850,11 +6850,12 @@ enum {#define _PS_2B_CTRL 0x68A80#define _PS_1C_CTRL 0x69180#define PS_SCALER_EN (1 << 31) -#define PS_SCALER_MODE_MASK (3 << 28) -#define PS_SCALER_MODE_DYN (0 << 28) -#define PS_SCALER_MODE_HQ (1 << 28) +#define SKL_PS_SCALER_MODE_MASK (3 << 28) +#define SKL_PS_SCALER_MODE_DYN (0 << 28) +#define SKL_PS_SCALER_MODE_HQ (1 << 28)#define SKL_PS_SCALER_MODE_NV12 (2 << 28)#define PS_SCALER_MODE_PLANAR (1 << 29) +#define PS_SCALER_MODE_PACKED (0 << 29)#define PS_PLANE_SEL_MASK (7 << 25)#define PS_PLANE_SEL (plane) (((plane) + 1) << 25)#define PS_FILTER_MASK (3 << 23)
drivers/gpu/drm/i915/intel_atomic.c +61 -47
133 lines not on this page · raw message
drivers/gpu/drm/i915/intel_display.c +1 -1
@@ -13954,7 +13954,7 @@ static void intel_crtc_init_scalers(struct intel_crtc *crtc,struct intel_scaler *scaler = &scaler_state->scalers[i]; scaler->in_use =0 ; - scaler->mode =PS_SCALER_MODE_DYN ; + scaler->mode =0 ; } scaler_state->scaler_id =-1 ;
Signature · 6 lines
2.18.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 6/15 drm/i915: Force NV12 coordinates to be a multiple of 2
In reply to Maarten LankhorstWe can't make NV12 work any other way. The scaler doesn't handle odd coordinates well, and we will get visual corruption on the screen.
--- drivers/gpu/drm/i915/intel_display.c | 9 +++++++++ 1 file changed, 9 insertions(+)
drivers/gpu/drm/i915/intel_display.c +9 -0
@@ -3072,6 +3072,15 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)static int skl_check_nv12_surface (struct intel_plane_state *plane_state) { +if ((plane_state->base.src.x1 >>16 ) %2 || + (plane_state->base.src.y1 >>16 ) %2 || + (drm_rect_width (&plane_state->base.src) >>16 ) %2 || + (drm_rect_height (&plane_state->base.src) >>16 ) %2 ) { +DRM_DEBUG_KMS ("src coordinates and width/height must be a multiple of 2\n" ); + +return -EINVAL ; + } +/* Display WA #1106 */ if (plane_state->base.rotation != (DRM_MODE_REFLECT_X | DRM_MODE_ROTATE_90) &&
Signature · 6 lines
2.18.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 7/15 drm/i915: Unconditionally clear plane_state->visible flag
In reply to Maarten LankhorstIf we ever hit bugs in our readout code we may have set plane_state->visible without setting a fb/crtc. Our code implicitly assumes that plane_state->visible is only true when both are set, so we will either null deref in intel_fbc_choose_crtc() or do something bad during the actual commit which cares even more.
--- drivers/gpu/drm/i915/intel_atomic_plane.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_atomic_plane.c +2 -1
@@ -117,10 +117,10 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_struct intel_plane *intel_plane =to_intel_plane (plane);int ret; + intel_state->base.visible = false;if (!intel_state->base.crtc && !old_plane_state->base.crtc)return 0 ; - intel_state->base.visible = false; ret = intel_plane->check_plane (crtc_state, intel_state);if (ret)return ret;
@@ -152,6 +152,7 @@ static int intel_plane_atomic_check(struct drm_plane *plane,const struct drm_crtc_state *old_crtc_state;struct drm_crtc_state *new_crtc_state; + new_plane_state->visible = false;if (!crtc)return 0 ;
Signature · 6 lines
2.18.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 8/15 drm/i915/gen11: Enable 6 sprites on gen11
In reply to Maarten LankhorstGen11 supports 7 planes + 1 cursor on each pipe. Bump I915_MAX_PLANES to 8, and set num_sprites correctly.
--- drivers/gpu/drm/i915/intel_device_info.c | 5 ++++- drivers/gpu/drm/i915/intel_display.h | 3 +++ 2 files changed, 7 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_device_info.c +4 -1
@@ -761,7 +761,10 @@ void intel_device_info_runtime_init(struct intel_device_info *info)* we don't expose the topmost plane at all to prevent ABI breakage * down the line. */ -if (IS_GEN10 (dev_priv) ||IS_GEMINILAKE (dev_priv)) +if (IS_GEN11 (dev_priv)) +for_each_pipe (dev_priv, pipe) + info->num_sprites[pipe] =6 ; +else if (IS_GEN10 (dev_priv) ||IS_GEMINILAKE (dev_priv))for_each_pipe (dev_priv, pipe) info->num_sprites[pipe] =3 ;else if (IS_BROXTON (dev_priv)) {
drivers/gpu/drm/i915/intel_display.h +3 -0
@@ -120,6 +120,9 @@ enum plane_id {PLANE_SPRITE0 ,PLANE_SPRITE1 ,PLANE_SPRITE2 , +PLANE_SPRITE3 , +PLANE_SPRITE4 , +PLANE_SPRITE5 ,PLANE_CURSOR , I915_MAX_PLANES,
Signature · 6 lines
2.18.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 9/15 drm/i915/gen11: Link nv12 Y and UV planes in the atomic state, v2.
In reply to Maarten LankhorstTo make NV12 working on icl, we need to update 2 planes simultaneously. I've chosen to do this in the CRTC step after plane validation is done, so we know what planes are (in)visible. The linked Y plane will get updated in intel_plane_update_planes_on_crtc(), by the call to update_slave, which gets the master's plane_state as argument.
The link requires both planes for atomic_update to work, so make sure skl_ddb_add_affected_planes() adds both states.
Changes since v1:
- Introduce icl_is_nv12_y_plane(), instead of hardcoding sprite numbers.
- Put all the state updating login in intel_plane_atomic_check_with_state().
- Clean up changes in intel_plane_atomic_check().
--- drivers/gpu/drm/i915/intel_atomic_plane.c | 107 ++++++++++++++++++---- drivers/gpu/drm/i915/intel_display.c | 57 ++++++++++++ drivers/gpu/drm/i915/intel_drv.h | 53 +++++++++++ drivers/gpu/drm/i915/intel_pm.c | 12 ++- 4 files changed, 210 insertions(+), 19 deletions(-)
drivers/gpu/drm/i915/intel_atomic_plane.c +89 -18
@@ -117,7 +117,12 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_struct intel_plane *intel_plane =to_intel_plane (plane);int ret; + crtc_state->active_planes &= ~BIT (intel_plane->id); intel_state->base.visible = false; + intel_state->linked_plane =NULL ; + intel_state->slave = false; + +/* If this is a cursor or Y plane, no further checks are needed. */ if (!intel_state->base.crtc && !old_plane_state->base.crtc)return 0 ;
@@ -128,8 +133,6 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_/* FIXME pre-g4x don't work like this */ if (state->visible) crtc_state->active_planes |=BIT (intel_plane->id); -else - crtc_state->active_planes &= ~BIT (intel_plane->id);if (state->visible && state->fb->format->format ==DRM_FORMAT_NV12 ) crtc_state->nv12_planes |=BIT (intel_plane->id);
@@ -142,27 +145,76 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_ state); } -static int intel_plane_atomic_check (struct drm_plane *plane, -struct drm_plane_state *new_plane_state) +static int intel_plane_atomic_check (struct drm_plane *drm_plane, +struct drm_plane_state *new_drm_plane_state) { -struct drm_atomic_state *state = new_plane_state->state; -const struct drm_plane_state *old_plane_state = -drm_atomic_get_old_plane_state (state, plane); -struct drm_crtc *crtc = new_plane_state->crtc ?: old_plane_state->crtc; -const struct drm_crtc_state *old_crtc_state; -struct drm_crtc_state *new_crtc_state; - - new_plane_state->visible = false; +struct intel_atomic_state *state = +to_intel_atomic_state (new_drm_plane_state->state); +struct intel_plane *plane =to_intel_plane (drm_plane); +const struct intel_plane_state *old_plane_state = +intel_atomic_get_old_plane_state (state, plane); +struct intel_plane_state *new_plane_state = +to_intel_plane_state (new_drm_plane_state); +struct intel_crtc *crtc =to_intel_crtc ( + new_plane_state->base.crtc ?: + old_plane_state->base.crtc); +const struct intel_crtc_state *old_crtc_state; +struct intel_crtc_state *new_crtc_state; +struct intel_plane *linked = old_plane_state->linked_plane; +int ret; +const struct intel_plane_state *old_linked_state; +struct intel_plane_state *new_linked_state =NULL ; + +if (linked) { +/* +* Make sure a previously linked plane (and implicitly, the CRTC) +* is part of the atomic commit. +*/ +if (!intel_atomic_get_new_plane_state (state, linked)) { + new_linked_state =intel_atomic_get_plane_state (state, linked); +if (IS_ERR (new_linked_state)) +return PTR_ERR (new_linked_state); + } + + old_linked_state = +intel_atomic_get_old_plane_state (state, linked); + +/* +* This will happen when we're the Y plane. In which case +* old/new_state->crtc are both NULL. We still need to perform +* updates on the linked plane. +*/ +if (!crtc) + crtc =to_intel_crtc (old_linked_state->base.crtc); + +WARN_ON (!crtc); + } + + new_plane_state->base.visible = false;if (!crtc)return 0 ; - old_crtc_state =drm_atomic_get_old_crtc_state (state, crtc); - new_crtc_state =drm_atomic_get_new_crtc_state (state, crtc); + old_crtc_state =intel_atomic_get_old_crtc_state (state, crtc); + new_crtc_state =intel_atomic_get_new_crtc_state (state, crtc); + +if (new_linked_state && +drm_plane_index (&linked->base) <drm_plane_index (&plane->base)) { +/* +* This function is called from drm_atomic_helper_check_planes(), which +* will normally check the newly added plane for us, but since we're +* already in that function, it won't check the plane if our index +* is bigger than the linked index because of the +* for_each_oldnew_plane_in_state() call. +*/ + new_crtc_state->base.planes_changed = true; + ret =intel_plane_atomic_check_with_state (old_crtc_state, new_crtc_state, + old_linked_state, new_linked_state); +if (ret) +return ret; + } -return intel_plane_atomic_check_with_state (to_intel_crtc_state (old_crtc_state), -to_intel_crtc_state (new_crtc_state), -to_intel_plane_state (old_plane_state), -to_intel_plane_state (new_plane_state)); +return intel_plane_atomic_check_with_state (old_crtc_state, new_crtc_state, + old_plane_state, new_plane_state); } void intel_update_planes_on_crtc(struct intel_atomic_state *old_state,
@@ -187,6 +239,25 @@ void intel_update_planes_on_crtc(struct intel_atomic_state *old_state,trace_intel_update_plane (&plane->base, crtc); plane->update_plane (plane, new_crtc_state, new_plane_state); + }else if (new_plane_state->slave) { +struct intel_plane *master = + new_plane_state->linked_plane; + +/* +* We update the slave plane from this function because +* programming it from the master plane's update_plane +* callback runs into issues when the Y plane is +* reassigned, disabled or used by a different plane. +* +* The slave plane is updated with the master plane's +* plane_state. +*/ + new_plane_state = +intel_atomic_get_new_plane_state (old_state, master); + +trace_intel_update_plane (&plane->base, crtc); + + plane->update_slave (plane, new_crtc_state, new_plane_state); }else {trace_intel_disable_plane (&plane->base, crtc);
drivers/gpu/drm/i915/intel_display.c +57 -0
69 lines not on this page · raw message
drivers/gpu/drm/i915/intel_drv.h +53 -0
77 lines not on this page · raw message
drivers/gpu/drm/i915/intel_pm.c +11 -1
@@ -5137,11 +5137,12 @@ skl_ddb_add_affected_planes(struct intel_crtc_state *cstate)struct intel_atomic_state *intel_state =to_intel_atomic_state (state);struct skl_ddb_allocation *new_ddb = &intel_state->wm_results.ddb;struct skl_ddb_allocation *cur_ddb = &dev_priv->wm.skl_hw.ddb; -struct drm_plane_state *plane_state;struct drm_plane *plane;enum pipe pipe = intel_crtc->pipe;drm_for_each_plane_mask (plane, dev, cstate->base.plane_mask) { +struct drm_plane_state *plane_state; +struct intel_plane *linked;enum plane_id plane_id =to_intel_plane (plane)->id; if (skl_ddb_entry_equal(&cur_ddb->plane[pipe][plane_id],
@@ -5153,6 +5154,15 @@ skl_ddb_add_affected_planes(struct intel_crtc_state *cstate) plane_state =drm_atomic_get_plane_state (state, plane);if (IS_ERR (plane_state))return PTR_ERR (plane_state); + +/* Make sure linked plane is updated too */ + linked =to_intel_plane_state (plane_state)->linked_plane; +if (!linked) +continue ; + + plane_state =drm_atomic_get_plane_state (state, &linked->base); +if (IS_ERR (plane_state)) +return PTR_ERR (plane_state); }return 0 ;
Signature · 6 lines
2.18.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 10/15 drm/i915/gen11: Handle watermarks correctly for separate Y/UV planes.
In reply to Maarten LankhorstSkylake style watermarks program the UV parameters into wm->uv_wm, and have a separate DDB allocation for UV blocks into the same plane.
Gen11 watermarks have a separate plane for Y and UV, with separate mechanisms. The simplest way to make it work is to keep the current way of programming watermarks and calculate the Y and UV plane watermarks from the master plane.
--- drivers/gpu/drm/i915/intel_pm.c | 122 +++++++++++++++++++------------- 1 file changed, 72 insertions(+), 50 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +72 -50
@@ -3945,14 +3945,9 @@ skl_ddb_get_hw_plane_state(struct drm_i915_private *dev_priv, val & PLANE_CTL_ALPHA_MASK); val =I915_READ (PLANE_BUF_CFG (pipe, plane_id)); -/* -* FIXME: add proper NV12 support for ICL. Avoid reading unclaimed -* registers for now. -*/ -if (INTEL_GEN (dev_priv) <11 ) +if (fourcc ==DRM_FORMAT_NV12 &&INTEL_GEN (dev_priv) <11 ) { val2 =I915_READ (PLANE_NV12_BUF_CFG (pipe, plane_id)); -if (fourcc ==DRM_FORMAT_NV12 ) {skl_ddb_entry_init_from_hw (dev_priv, &ddb->plane[pipe][plane_id], val2); skl_ddb_entry_init_from_hw(dev_priv,
@@ -4207,19 +4202,29 @@ skl_get_total_relative_data_rate(struct intel_crtc_state *intel_cstate,drm_atomic_crtc_state_for_each_plane_state (plane, pstate, cstate) {enum plane_id plane_id =to_intel_plane (plane)->id;unsigned int rate; +struct intel_plane_state *plane_state = +to_intel_plane_state (pstate); +enum plane_id plane0_id = + plane_state->linked_plane ? + plane_state->linked_plane->id : plane_id; +unsigned int *uv_data_rate = + plane_state->linked_plane ? + &plane_data_rate[plane_id] : + &uv_plane_data_rate[plane_id]; + +if (plane_state->slave) +continue ;/* packed/y */ rate =skl_plane_relative_data_rate (intel_cstate, pstate,0 ); - plane_data_rate[plane_id] = rate; - + plane_data_rate[plane0_id] = rate; total_data_rate += rate;/* uv-plane */ rate =skl_plane_relative_data_rate (intel_cstate, pstate,1 ); - uv_plane_data_rate[plane_id] = rate; - + *uv_data_rate = rate; total_data_rate += rate; }
@@ -4298,6 +4303,7 @@ skl_ddb_calc_min(const struct intel_crtc_state *cstate, int num_active,drm_atomic_crtc_state_for_each_plane_state (plane, pstate, &cstate->base) {enum plane_id plane_id =to_intel_plane (plane)->id; +struct intel_plane_state *plane_state =to_intel_plane_state (pstate);if (plane_id ==PLANE_CURSOR )continue ;
@@ -4305,8 +4311,14 @@ skl_ddb_calc_min(const struct intel_crtc_state *cstate, int num_active,if (!pstate->visible)continue ; - minimum[plane_id] =skl_ddb_min_alloc (pstate,0 ); - uv_minimum[plane_id] =skl_ddb_min_alloc (pstate,1 ); +if (!plane_state->linked_plane) { + minimum[plane_id] =skl_ddb_min_alloc (pstate,0 ); + uv_minimum[plane_id] =skl_ddb_min_alloc (pstate,1 ); + }else { +enum plane_id aux = plane_state->linked_plane->id; + minimum[aux] =skl_ddb_min_alloc (pstate,0 ); + minimum[plane_id] =skl_ddb_min_alloc (pstate,1 ); + } } minimum[PLANE_CURSOR ] =skl_cursor_allocation (num_active);
@@ -4780,36 +4792,20 @@ skl_compute_wm_levels(const struct drm_i915_private *dev_priv,struct skl_ddb_allocation *ddb, struct intel_crtc_state *cstate, const struct intel_plane_state *intel_pstate, + uint16_t ddb_blocks, const struct skl_wm_params *wm_params, struct skl_plane_wm *wm, - int plane_id) + struct skl_wm_level *levels) { - struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc); -struct drm_plane *plane = intel_pstate->base.plane; -struct intel_plane *intel_plane =to_intel_plane (plane); -uint16_t ddb_blocks; -enum pipe pipe = intel_crtc->pipe; int level, max_level = ilk_wm_max_level(dev_priv); -enum plane_id intel_plane_id = intel_plane->id; +struct skl_wm_level *result_prev = &levels[0 ];int ret;if (WARN_ON (!intel_pstate->base.fb))return -EINVAL ; - ddb_blocks = plane_id ? -skl_ddb_entry_size (&ddb->uv_plane[pipe][intel_plane_id]) : -skl_ddb_entry_size (&ddb->plane[pipe][intel_plane_id]); - for (level = 0; level <= max_level; level++) { - struct skl_wm_level *result = plane_id ? &wm->uv_wm[level] : - &wm->wm[level]; - struct skl_wm_level *result_prev; - - if (level) - result_prev = plane_id ? &wm->uv_wm[level - 1] : - &wm->wm[level - 1]; - else - result_prev = plane_id ? &wm->uv_wm[0] : &wm->wm[0]; + struct skl_wm_level *result = &levels[level]; ret = skl_compute_plane_wm(dev_priv, cstate,
@@ -4821,6 +4817,8 @@ skl_compute_wm_levels(const struct drm_i915_private *dev_priv, result);if (ret)return ret; + + result_prev = result; }if (intel_pstate->base.fb->format->format ==DRM_FORMAT_NV12 )
@@ -4929,20 +4927,29 @@ static int skl_build_pipe_wm(struct intel_crtc_state *cstate,const struct intel_plane_state *intel_pstate =to_intel_plane_state (pstate);enum plane_id plane_id =to_intel_plane (plane)->id; +enum plane_id plane0_id = + intel_pstate->linked_plane ? + intel_pstate->linked_plane->id : plane_id;struct skl_wm_params wm_params;enum pipe pipe =to_intel_crtc (cstate->base.crtc)->pipe;uint16_t ddb_blocks; - wm = &pipe_wm->planes[plane_id]; - ddb_blocks =skl_ddb_entry_size (&ddb->plane[pipe][plane_id]); +/* Watermarks calculated in master */ +if (intel_pstate->slave) +continue ; + + wm = &pipe_wm->planes[plane0_id]; + ddb_blocks =skl_ddb_entry_size (&ddb->plane[pipe][plane0_id]); ret =skl_compute_plane_wm_params (dev_priv, cstate, - intel_pstate, &wm_params,0 ); + intel_pstate, + &wm_params,0 );if (ret)return ret; ret =skl_compute_wm_levels (dev_priv, ddb, cstate, - intel_pstate, &wm_params, wm,0 ); + intel_pstate, ddb_blocks, + &wm_params, wm, wm->wm);if (ret)return ret;
@@ -4960,11 +4967,32 @@ static int skl_build_pipe_wm(struct intel_crtc_state *cstate,if (ret)return ret; - ret =skl_compute_wm_levels (dev_priv, ddb, cstate, - intel_pstate, &wm_params, - wm,1 ); -if (ret) -return ret; +if (intel_pstate->linked_plane) { + ddb_blocks = +skl_ddb_entry_size (&ddb->plane[pipe][plane_id]); + +/* write out wm on the UV plane */ + wm = &pipe_wm->planes[plane_id]; + wm->is_planar = true; + + ret =skl_compute_wm_levels (dev_priv, ddb, cstate, + intel_pstate, ddb_blocks, + &wm_params, wm, wm->wm); +if (ret) +return ret; + +skl_compute_transition_wm (cstate, &wm_params, &wm->wm[0 ], + ddb_blocks, &wm->trans_wm); + }else { + ddb_blocks = +skl_ddb_entry_size (&ddb->uv_plane[pipe][plane_id]); + + ret =skl_compute_wm_levels (dev_priv, ddb, cstate, + intel_pstate, ddb_blocks, + &wm_params, wm, wm->uv_wm); +if (ret) +return ret; + } } }
@@ -5016,14 +5044,7 @@ static void skl_write_plane_wm(struct intel_crtc *intel_crtc,skl_write_wm_level (dev_priv,PLANE_WM_TRANS (pipe, plane_id), &wm->trans_wm); -skl_ddb_entry_write (dev_priv,PLANE_BUF_CFG (pipe, plane_id), - &ddb->plane[pipe][plane_id]); -/* FIXME: add proper NV12 support for ICL. */ -if (INTEL_GEN (dev_priv) >=11 ) -return skl_ddb_entry_write (dev_priv, -PLANE_BUF_CFG (pipe, plane_id), - &ddb->plane[pipe][plane_id]); -if (wm->is_planar) { +if (wm->is_planar &&INTEL_GEN (dev_priv) <11 ) {skl_ddb_entry_write (dev_priv,PLANE_BUF_CFG (pipe, plane_id), &ddb->uv_plane[pipe][plane_id]); skl_ddb_entry_write(dev_priv,
@@ -5032,7 +5053,8 @@ static void skl_write_plane_wm(struct intel_crtc *intel_crtc, }else {skl_ddb_entry_write (dev_priv,PLANE_BUF_CFG (pipe, plane_id), &ddb->plane[pipe][plane_id]); -I915_WRITE (PLANE_NV12_BUF_CFG (pipe, plane_id),0x0 ); +if (INTEL_GEN (dev_priv) <11 ) +I915_WRITE (PLANE_NV12_BUF_CFG (pipe, plane_id),0x0 ); } }
Signature · 6 lines
2.18.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 11/15 drm/i915: Move programming plane scaler to its own function.
In reply to Maarten LankhorstThis cleans the code up slightly, and will make other changes easier.
--- drivers/gpu/drm/i915/intel_sprite.c | 90 +++++++++++++++++------------ 1 file changed, 52 insertions(+), 38 deletions(-)
drivers/gpu/drm/i915/intel_sprite.c +52 -38
@@ -280,13 +280,63 @@ skl_plane_max_stride(struct intel_plane *plane,return min (8192 * cpp,32768 ); } +static void +skl_program_scaler (struct drm_i915_private *dev_priv, +struct intel_plane *plane, +const struct intel_crtc_state *crtc_state, +const struct intel_plane_state *plane_state) +{ +enum plane_id plane_id = plane->id; +enum pipe pipe = plane->pipe; +int scaler_id = plane_state->scaler_id; +const struct intel_scaler *scaler = + &crtc_state->scaler_state.scalers[scaler_id]; +int crtc_x = plane_state->base.dst.x1; +int crtc_y = plane_state->base.dst.y1; +uint32_t crtc_w =drm_rect_width (&plane_state->base.dst); +uint32_t crtc_h =drm_rect_height (&plane_state->base.dst); +u16 y_hphase, uv_rgb_hphase; +u16 y_vphase, uv_rgb_vphase; + +/* Sizes are 0 based */ + crtc_w--; + crtc_h--; + +/* TODO: handle sub-pixel coordinates */ +if (plane_state->base.fb->format->format ==DRM_FORMAT_NV12 ) { + y_hphase =skl_scaler_calc_phase (1 , false); + y_vphase =skl_scaler_calc_phase (1 , false); + +/* MPEG2 chroma siting convention */ + uv_rgb_hphase =skl_scaler_calc_phase (2 , true); + uv_rgb_vphase =skl_scaler_calc_phase (2 , false); + }else { +/* not used */ + y_hphase =0 ; + y_vphase =0 ; + + uv_rgb_hphase =skl_scaler_calc_phase (1 , false); + uv_rgb_vphase =skl_scaler_calc_phase (1 , false); + } + +I915_WRITE_FW (SKL_PS_CTRL (pipe, scaler_id), +PS_SCALER_EN |PS_PLANE_SEL (plane_id) | scaler->mode); +I915_WRITE_FW (SKL_PS_PWR_GATE (pipe, scaler_id),0 ); +I915_WRITE_FW (SKL_PS_VPHASE (pipe, scaler_id), +PS_Y_PHASE (y_vphase) |PS_UV_RGB_PHASE (uv_rgb_vphase)); +I915_WRITE_FW (SKL_PS_HPHASE (pipe, scaler_id), +PS_Y_PHASE (y_hphase) |PS_UV_RGB_PHASE (uv_rgb_hphase)); +I915_WRITE_FW (SKL_PS_WIN_POS (pipe, scaler_id), (crtc_x <<16 ) | crtc_y); +I915_WRITE_FW (SKL_PS_WIN_SZ (pipe, scaler_id), + ((crtc_w +1 ) <<16 )|(crtc_h +1 )); +} +void skl_update_plane (struct intel_plane *plane,const struct intel_crtc_state *crtc_state,const struct intel_plane_state *plane_state) {struct drm_i915_private *dev_priv =to_i915 (plane->base.dev); -const struct drm_framebuffer *fb = plane_state->base.fb;enum plane_id plane_id = plane->id;enum pipe pipe = plane->pipe;u32 plane_ctl = plane_state->ctl;
@@ -296,8 +346,6 @@ skl_update_plane(struct intel_plane *plane,u32 aux_stride =skl_plane_stride (plane_state,1 );int crtc_x = plane_state->base.dst.x1;int crtc_y = plane_state->base.dst.y1; -uint32_t crtc_w =drm_rect_width (&plane_state->base.dst); -uint32_t crtc_h =drm_rect_height (&plane_state->base.dst);uint32_t x = plane_state->color_plane[0 ].x;uint32_t y = plane_state->color_plane[0 ].y;uint32_t src_w =drm_rect_width (&plane_state->base.src) >>16 ;
@@ -307,8 +355,6 @@ skl_update_plane(struct intel_plane *plane,/* Sizes are 0 based */ src_w--; src_h--; - crtc_w--; - crtc_h--;spin_lock_irqsave (&dev_priv->uncore.lock, irqflags);
@@ -333,39 +379,7 @@ skl_update_plane(struct intel_plane *plane,/* program plane scaler */ if (plane_state->scaler_id >=0 ) { -int scaler_id = plane_state->scaler_id; -const struct intel_scaler *scaler = - &crtc_state->scaler_state.scalers[scaler_id]; -u16 y_hphase, uv_rgb_hphase; -u16 y_vphase, uv_rgb_vphase; - -/* TODO: handle sub-pixel coordinates */ -if (fb->format->format ==DRM_FORMAT_NV12 ) { - y_hphase =skl_scaler_calc_phase (1 , false); - y_vphase =skl_scaler_calc_phase (1 , false); - -/* MPEG2 chroma siting convention */ - uv_rgb_hphase =skl_scaler_calc_phase (2 , true); - uv_rgb_vphase =skl_scaler_calc_phase (2 , false); - }else { -/* not used */ - y_hphase =0 ; - y_vphase =0 ; - - uv_rgb_hphase =skl_scaler_calc_phase (1 , false); - uv_rgb_vphase =skl_scaler_calc_phase (1 , false); - } - -I915_WRITE_FW (SKL_PS_CTRL (pipe, scaler_id), -PS_SCALER_EN |PS_PLANE_SEL (plane_id) | scaler->mode); -I915_WRITE_FW (SKL_PS_PWR_GATE (pipe, scaler_id),0 ); -I915_WRITE_FW (SKL_PS_VPHASE (pipe, scaler_id), -PS_Y_PHASE (y_vphase) |PS_UV_RGB_PHASE (uv_rgb_vphase)); -I915_WRITE_FW (SKL_PS_HPHASE (pipe, scaler_id), -PS_Y_PHASE (y_hphase) |PS_UV_RGB_PHASE (uv_rgb_hphase)); -I915_WRITE_FW (SKL_PS_WIN_POS (pipe, scaler_id), (crtc_x <<16 ) | crtc_y); -I915_WRITE_FW (SKL_PS_WIN_SZ (pipe, scaler_id), - ((crtc_w +1 ) <<16 )|(crtc_h +1 )); +skl_program_scaler (dev_priv, plane, crtc_state, plane_state);I915_WRITE_FW (PLANE_POS (pipe, plane_id),0 ); }else {
Signature · 6 lines
2.18.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 12/15 drm/i915/gen11: Program the scalers correctly for planar formats.
In reply to Maarten LankhorstThe first 3 planes (primary, sprite 0 and 1) have a dedicated chroma upsampler to upscale YUV420 to YUV444 and the scaler should only be used for upscaling. Because of this we shouldn't program the scalers in planar mode if NV12 and the chroma upsampler are used. Instead program the scalers like on normal planes.
Sprite 2 and 3 have no dedicated scaler, and need to program the selected Y plane in the scaler mode.
--- drivers/gpu/drm/i915/i915_reg.h | 2 ++ drivers/gpu/drm/i915/intel_atomic.c | 6 +++++- drivers/gpu/drm/i915/intel_display.c | 30 ++++++++++++++++------------ drivers/gpu/drm/i915/intel_drv.h | 8 ++++++++ drivers/gpu/drm/i915/intel_sprite.c | 3 ++- 5 files changed, 34 insertions(+), 15 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +2 -0
@@ -6872,6 +6872,8 @@ enum {#define PS_VADAPT_MODE_LEAST_ADAPT (0 << 5)#define PS_VADAPT_MODE_MOD_ADAPT (1 << 5)#define PS_VADAPT_MODE_MOST_ADAPT (3 << 5) +#define PS_PLANE_Y_SEL_MASK (7 << 5) +#define PS_PLANE_Y_SEL (plane) (((plane) + 1) << 5)#define _PS_PWR_GATE_1A 0x68160#define _PS_PWR_GATE_2A 0x68260
drivers/gpu/drm/i915/intel_atomic.c +5 -1
@@ -234,9 +234,13 @@ static void intel_atomic_setup_scaler(struct intel_crtc_scaler_state *scaler_staif (INTEL_GEN (dev_priv) ==9 && !IS_GEMINILAKE (dev_priv)) mode =SKL_PS_SCALER_MODE_NV12 ; -else +else if (!icl_is_hdr_plane (to_intel_plane (plane_state->base.plane))) { mode =PS_SCALER_MODE_PLANAR ; +if (plane_state->linked_plane) + mode |=PS_PLANE_Y_SEL (plane_state->linked_plane->id); + }else + mode =PS_SCALER_MODE_PACKED ; }else if (INTEL_GEN (dev_priv) >9 ||IS_GEMINILAKE (dev_priv)) { mode =PS_SCALER_MODE_PACKED ; }else if (num_scalers_need ==1 && intel_crtc->num_scalers >1 ) {
drivers/gpu/drm/i915/intel_display.c +17 -13
@@ -4842,8 +4842,7 @@ static int skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach, unsigned int scaler_user, int *scaler_id, int src_w, int src_h, int dst_w, int dst_h, - bool plane_scaler_check, - uint32_t pixel_format) + const struct drm_format_info *format, bool need_scaling) { struct intel_crtc_scaler_state *scaler_state = &crtc_state->scaler_state;
@@ -4852,18 +4851,14 @@ skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,struct drm_i915_private *dev_priv =to_i915 (intel_crtc->base.dev);const struct drm_display_mode *adjusted_mode = &crtc_state->base.adjusted_mode; -int need_scaling;/* * Src coordinates are already rotated by 270 degrees for * the 90/270 degree plane rotation cases (to match the * GTT mapping), hence no need to account for rotation here. */ - need_scaling = src_w != dst_w || src_h != dst_h; - -if (plane_scaler_check) -if (pixel_format ==DRM_FORMAT_NV12 ) - need_scaling = true; +if (src_w != dst_w || src_h != dst_h) + need_scaling = true;if (crtc_state->ycbcr420 && scaler_user ==SKL_CRTC_INDEX ) need_scaling = true;
@@ -4904,7 +4899,7 @@ skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,return 0 ; } -if (plane_scaler_check && pixel_format ==DRM_FORMAT_NV12 && +if (format && format->format ==DRM_FORMAT_NV12 && (src_h <SKL_MIN_YUV_420_SRC_H || src_w <SKL_MIN_YUV_420_SRC_W )) {DRM_DEBUG_KMS ("NV12: src dimensions not met\n" );return -EINVAL ;
@@ -4952,7 +4947,7 @@ int skl_update_scaler_crtc(struct intel_crtc_state *state) &state->scaler_state.scaler_id, state->pipe_src_w, state->pipe_src_h, adjusted_mode->crtc_hdisplay, - adjusted_mode->crtc_vdisplay, false, 0); + adjusted_mode->crtc_vdisplay, NULL, 0); }/**
@@ -4967,13 +4962,22 @@ int skl_update_scaler_crtc(struct intel_crtc_state *state)static int skl_update_scaler_plane (struct intel_crtc_state *crtc_state,struct intel_plane_state *plane_state) { -struct intel_plane *intel_plane =to_intel_plane (plane_state->base.plane);struct drm_framebuffer *fb = plane_state->base.fb;int ret; -bool force_detach = !fb || !plane_state->base.visible; +bool need_scaling = false; + +if (fb && fb->format->format ==DRM_FORMAT_NV12 ) { +/* +* Gen10- and sprite 2 and 3 always need the scaler. +* On gen11 we use the chroma upsampler when available, +* and only use the scaler for normal scaling. +*/ +if (!icl_is_hdr_plane (intel_plane)) + need_scaling = true; + } ret = skl_update_scaler(crtc_state, force_detach, drm_plane_index(&intel_plane->base),
@@ -4982,7 +4986,7 @@ static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,drm_rect_height (&plane_state->base.src) >>16 ,drm_rect_width (&plane_state->base.dst),drm_rect_height (&plane_state->base.dst), - fb ? true : false, fb ? fb->format->format : 0); + fb ? fb->format : NULL, need_scaling);if (ret || plane_state->scaler_id <0 )return ret;
drivers/gpu/drm/i915/intel_drv.h +8 -0
@@ -2196,6 +2196,14 @@ static inline bool icl_is_nv12_y_plane(enum plane_id id)return false; } +static inline bool icl_is_hdr_plane (struct intel_plane *plane) +{ +if (INTEL_GEN (to_i915 (plane->base.dev)) <11 ) +return false; + +return plane->id <PLANE_SPRITE2 ; +} +/* intel_tv.c */ void intel_tv_init (struct drm_i915_private *dev_priv);
drivers/gpu/drm/i915/intel_sprite.c +2 -1
@@ -303,7 +303,8 @@ skl_program_scaler(struct drm_i915_private *dev_priv, crtc_h--;/* TODO: handle sub-pixel coordinates */ -if (plane_state->base.fb->format->format ==DRM_FORMAT_NV12 ) { +if (plane_state->base.fb->format->format ==DRM_FORMAT_NV12 && + !icl_is_hdr_plane (plane)) { y_hphase =skl_scaler_calc_phase (1 , false); y_vphase =skl_scaler_calc_phase (1 , false);
Signature · 6 lines
2.18.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 13/15 drm/i915/gen11: Program the chroma upsampler for HDR planes.
In reply to Maarten LankhorstWe configure the chroma upsampler with the same chroma siting as used by the scaler for consistency, the chroma upsampler is used instead of the scaler for YUV 4:2:0 on ICL's HDR planes.
--- drivers/gpu/drm/i915/i915_reg.h | 22 ++++++++++++++++++++++ drivers/gpu/drm/i915/intel_sprite.c | 22 ++++++++++++++++++++++ 2 files changed, 44 insertions(+)
drivers/gpu/drm/i915/i915_reg.h +22 -0
@@ -6560,6 +6560,19 @@ enum {#define _PLANE_AUX_DIST_2_A 0x702c0#define _PLANE_AUX_OFFSET_1_A 0x701c4#define _PLANE_AUX_OFFSET_2_A 0x702c4 +#define _PLANE_CUS_CTL_1_A 0x701c8 +#define _PLANE_CUS_CTL_2_A 0x702c8 +#define PLANE_CUS_ENABLE (1 << 31) +#define PLANE_CUS_PLANE_6 (0 << 30) +#define PLANE_CUS_PLANE_7 (1 << 30) +#define PLANE_CUS_HPHASE_SIGN_NEGATIVE (1 << 19) +#define PLANE_CUS_HPHASE_0 (0 << 16) +#define PLANE_CUS_HPHASE_0_25 (1 << 16) +#define PLANE_CUS_HPHASE_0_5 (2 << 16) +#define PLANE_CUS_VPHASE_SIGN_NEGATIVE (1 << 15) +#define PLANE_CUS_VPHASE_0 (0 << 12) +#define PLANE_CUS_VPHASE_0_25 (1 << 12) +#define PLANE_CUS_VPHASE_0_5 (2 << 12)#define _PLANE_COLOR_CTL_1_A 0x701CC/* GLK+ */ #define _PLANE_COLOR_CTL_2_A 0x702CC/* GLK+ */ #define _PLANE_COLOR_CTL_3_A 0x703CC/* GLK+ */
@@ -6697,6 +6710,15 @@ enum {#define PLANE_AUX_OFFSET (pipe, plane) \ _MMIO_PLANE(plane, _PLANE_AUX_OFFSET_1(pipe), _PLANE_AUX_OFFSET_2(pipe)) +#define _PLANE_CUS_CTL_1_B 0x711c8 +#define _PLANE_CUS_CTL_2_B 0x712c8 +#define _PLANE_CUS_CTL_1 (pipe) \ + _PIPE(pipe, _PLANE_CUS_CTL_1_A, _PLANE_CUS_CTL_1_B) +#define _PLANE_CUS_CTL_2 (pipe) \ + _PIPE(pipe, _PLANE_CUS_CTL_2_A, _PLANE_CUS_CTL_2_B) +#define PLANE_CUS_CTL (pipe, plane) \ + _MMIO_PLANE(plane, _PLANE_CUS_CTL_1(pipe), _PLANE_CUS_CTL_2(pipe)) +#define _PLANE_COLOR_CTL_1_B 0x711CC#define _PLANE_COLOR_CTL_2_B 0x712CC#define _PLANE_COLOR_CTL_3_B 0x713CC
drivers/gpu/drm/i915/intel_sprite.c +22 -0
@@ -351,6 +351,7 @@ skl_update_plane(struct intel_plane *plane,uint32_t y = plane_state->color_plane[0 ].y;uint32_t src_w =drm_rect_width (&plane_state->base.src) >>16 ;uint32_t src_h =drm_rect_height (&plane_state->base.src) >>16 ; +struct intel_plane *linked = plane_state->linked_plane;unsigned long irqflags;/* Sizes are 0 based */
@@ -378,6 +379,27 @@ skl_update_plane(struct intel_plane *plane, (plane_state->color_plane[1 ].y <<16 ) | plane_state->color_plane[1].x); +if (icl_is_hdr_plane (plane)) { +u32 cus_ctl =0 ; + +if (linked) { +/* Enable and use MPEG-2 chroma siting */ + cus_ctl =PLANE_CUS_ENABLE | +PLANE_CUS_HPHASE_0 | +PLANE_CUS_VPHASE_SIGN_NEGATIVE | +PLANE_CUS_VPHASE_0_25 ; + +if (linked->id ==PLANE_SPRITE5 ) + cus_ctl |=PLANE_CUS_PLANE_7 ; +else if (linked->id ==PLANE_SPRITE4 ) + cus_ctl |=PLANE_CUS_PLANE_6 ; +else +MISSING_CASE (linked->id); + } + +I915_WRITE_FW (PLANE_CUS_CTL (pipe, plane_id), cus_ctl); + } +/* program plane scaler */ if (plane_state->scaler_id >=0 ) {skl_program_scaler (dev_priv, plane, crtc_state, plane_state);
Signature · 6 lines
2.18.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 14/15 drm/i915/gen11: Program the Y and UV plane for planar mode correctly.
In reply to Maarten LankhorstThe UV plane is the master plane that does all color correction etc. It needs to be programmed with the dimensions for color plane 1 (UV).
The Y plane just feeds the Y pixels to it. Program the scaler from the master only, and set PLANE_CTL_YUV420_Y_PLANE on the slave plane.
Changes since v1:
- Make a common skl_program_plane, and use it for both plane updates.
--- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_sprite.c | 50 +++++++++++++++++++++-------- 2 files changed, 38 insertions(+), 13 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +1 -0
@@ -6511,6 +6511,7 @@ enum {#define PLANE_CTL_KEY_ENABLE_DESTINATION (2 << 21)#define PLANE_CTL_ORDER_BGRX (0 << 20)#define PLANE_CTL_ORDER_RGBX (1 << 20) +#define PLANE_CTL_YUV420_Y_PLANE (1 << 19)#define PLANE_CTL_YUV_TO_RGB_CSC_FORMAT_BT709 (1 << 18)#define PLANE_CTL_YUV422_ORDER_MASK (0x3 << 16)#define PLANE_CTL_YUV422_YUYV (0 << 16)
drivers/gpu/drm/i915/intel_sprite.c +37 -13
102 lines not on this page · raw message
Signature · 6 lines
2.18.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 15/15 drm/i915/gen11: Expose planar format support on gen11.
In reply to Maarten Lankhorst--- drivers/gpu/drm/i915/intel_display.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/intel_display.c +9 -7
@@ -13738,12 +13738,14 @@ static bool skl_plane_has_fbc(struct drm_i915_private *dev_priv,bool skl_plane_has_planar (struct drm_i915_private *dev_priv,enum pipe pipe,enum plane_id plane_id) { -/* -* FIXME: ICL requires two hardware planes for scanning out NV12 -* framebuffers. Do not advertize support until this is implemented. -*/ -if (INTEL_GEN (dev_priv) >=11 ) -return false; +if (INTEL_GEN (dev_priv) >=11 ) { +/* +* Sprite 4 and 5 are used for scanning out the planar Y plane, +* but it's the UV plane that counts for the Z-order, so don't +* advertise planar YUV support on it. +*/ +return plane_id <=PLANE_SPRITE3 ; + }if (IS_SKYLAKE (dev_priv) ||IS_BROXTON (dev_priv))return false;
@@ -14653,7 +14655,7 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,break ;case DRM_FORMAT_NV12 :if (INTEL_GEN (dev_priv) <9 ||IS_SKYLAKE (dev_priv) || -IS_BROXTON (dev_priv) ||INTEL_GEN (dev_priv) >=11 ) { +IS_BROXTON (dev_priv)) {DRM_DEBUG_KMS ("unsupported pixel format: %s\n" ,drm_get_format_name (mode_cmd->pixel_format, &format_name));
Signature · 6 lines
2.18.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for drm/i915/gen11: Implement planar format support.
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: drm/i915/gen11: Implement planar format support.
URL : https://patchwork.freedesktop.org/series/49910/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip a4eaf927a004 drm/i915: Clean up casts to crtc_state in intel_atomic_commit_tail() 0fd609b3d9b6 drm/i915: Handle cursor updating active_planes correctly. ce778e3b4ca8 drm/i915: Make intel_crtc_disable_planes() use active planes mask. -:25: WARNING:UNSPECIFIED_INT: Prefer 'unsigned int' to bare use of 'unsigned' #25: FILE: drivers/gpu/drm/i915/intel_display.c:5405: +static void intel_crtc_disable_planes(struct intel_crtc *crtc, unsigned plane_mask)
-:33: WARNING:UNSPECIFIED_INT: Prefer 'unsigned int' to bare use of 'unsigned' #33: FILE: drivers/gpu/drm/i915/intel_display.c:5409:
+ unsigned fb_bits = 0;
total: 0 errors, 2 warnings, 0 checks, 45 lines checked16a4dc462ded drm/i915: Replace call to commit_planes_on_crtc with internal update, v2. 2bf67e55f211 drm/i915: Clean up scaler setup.
-:96: CHECK:LINE_SPACING: Please don't use multiple blank lines
#96: FILE: drivers/gpu/drm/i915/intel_atomic.c:261:
+
+
total: 0 errors, 0 warnings, 1 checks, 156 lines checkedd79e4ec625b1 drm/i915: Force NV12 coordinates to be a multiple of 2b7730c8c44ca drm/i915: Unconditionally clear plane_state->visible flag59f05301361b drm/i915/gen11: Enable 6 sprites on gen1136eaf29d48e4 drm/i915/gen11: Link nv12 Y and UV planes in the atomic state, v2.
-:18: WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit description (prefer a maximum 75 chars per line) #18:
- Put all the state updating login in intel_plane_atomic_check_with_state().
-:73: CHECK:OPEN_ENDED_LINE: Lines should not end with a '(' #73: FILE: drivers/gpu/drm/i915/intel_atomic_plane.c:158:
+ struct intel_crtc *crtc = to_intel_crtc(
-:85: WARNING:BLOCK_COMMENT_STYLE: Block comments should align the * on each line #85: FILE: drivers/gpu/drm/i915/intel_atomic_plane.c:170:
+ /*
+ * Make sure a previously linked plane (and implicitly, the CRTC)
-:269: CHECK:BOOL_MEMBER: Avoid using bool structure members because of possible alignment issues - see: https://lkml.org/lkml/2017/11/21/384
#269: FILE: drivers/gpu/drm/i915/intel_drv.h:560:
+ bool slave;
-:290: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #290: FILE: drivers/gpu/drm/i915/intel_drv.h:1358:
+intel_atomic_get_plane_state(struct intel_atomic_state *state,
+ struct intel_plane *plane)
total: 0 errors, 2 warnings, 3 checks, 311 lines checked7dfbc98f126e drm/i915/gen11: Handle watermarks correctly for separate Y/UV planes. -:90: WARNING:LINE_SPACING: Missing a blank line after declarations #90: FILE: drivers/gpu/drm/i915/intel_pm.c:4319:
+ enum plane_id aux = plane_state->linked_plane->id;
+ minimum[aux] = skl_ddb_min_alloc(pstate, 0);
total: 0 errors, 1 warnings, 0 checks, 213 lines checked ec1e8d42067e drm/i915: Move programming plane scaler to its own function. -:66: CHECK:SPACING: spaces preferred around that '|' (ctx:VxV) #66: FILE: drivers/gpu/drm/i915/intel_sprite.c:331:
+ ((crtc_w + 1) << 16)|(crtc_h + 1));
^
total: 0 errors, 0 warnings, 1 checks, 120 lines checked 33fed8c42f7c drm/i915/gen11: Program the scalers correctly for planar formats. -:45: CHECK:BRACES: Unbalanced braces around else statement
#45: FILE: drivers/gpu/drm/i915/intel_atomic.c:242:
+ } else
total: 0 errors, 0 warnings, 1 checks, 122 lines checked e308838371e3 drm/i915/gen11: Program the chroma upsampler for HDR planes. -:46: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'pipe' - possible side-effects? #46: FILE: drivers/gpu/drm/i915/i915_reg.h:6719:
+#define PLANE_CUS_CTL(pipe, plane) \
+ _MMIO_PLANE(plane, _PLANE_CUS_CTL_1(pipe), _PLANE_CUS_CTL_2(pipe))
total: 0 errors, 0 warnings, 1 checks, 68 lines checked64f5cc32aebb drm/i915/gen11: Program the Y and UV plane for planar mode correctly. 2f4cfd3509d5 drm/i915/gen11: Expose planar format support on gen11. -:7: WARNING:COMMIT_MESSAGE: Missing commit description - Add an appropriate one
total: 0 errors, 1 warnings, 0 checks, 28 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.SPARSE: warning for drm/i915/gen11: Implement planar format support.
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: drm/i915/gen11: Implement planar format support.
URL : https://patchwork.freedesktop.org/series/49910/
State : warning
== Summary ==
$ dim sparse origin/drm-tip Commit: drm/i915: Clean up casts to crtc_state in intel_atomic_commit_tail() Okay!
Commit: drm/i915: Handle cursor updating active_planes correctly. Okay!
Commit: drm/i915: Make intel_crtc_disable_planes() use active planes mask. Okay!
Commit: drm/i915: Replace call to commit_planes_on_crtc with internal update, v2. Okay!
Commit: drm/i915: Clean up scaler setup.
Okay!
Commit: drm/i915: Force NV12 coordinates to be a multiple of 2 Okay!
Commit: drm/i915: Unconditionally clear plane_state->visible flag Okay!
Commit: drm/i915/gen11: Enable 6 sprites on gen11
Okay!
Commit: drm/i915/gen11: Link nv12 Y and UV planes in the atomic state, v2. Okay!
Commit: drm/i915/gen11: Handle watermarks correctly for separate Y/UV planes. Okay!
Commit: drm/i915: Move programming plane scaler to its own function. -O:drivers/gpu/drm/i915/intel_sprite.c:280:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_sprite.c:280:24: warning: expression using sizeof(void)
Commit: drm/i915/gen11: Program the scalers correctly for planar formats. Okay!
Commit: drm/i915/gen11: Program the chroma upsampler for HDR planes. Okay!
Commit: drm/i915/gen11: Program the Y and UV plane for planar mode correctly. Okay!
Commit: drm/i915/gen11: Expose planar format support on gen11. Okay!
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for drm/i915/gen11: Implement planar format support.
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: drm/i915/gen11: Implement planar format support.
URL : https://patchwork.freedesktop.org/series/49910/
State : failure
== Summary ==
= CI Bug Log - changes from CI_DRM_4843 -> Patchwork_10225 =
== Summary - FAILURE ==
Serious unknown changes coming with Patchwork_10225 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_10225, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/49910/revisions/1/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_10225:
=== IGT changes ===
==== Possible regressions ====
igt@drv_module_reload@basic-reload:
fi-skl-guc: PASS -> DMESG-WARN +41
igt@drv_module_reload@basic-reload-inject:
fi-skl-6260u: PASS -> DMESG-WARN +25
fi-byt-j1900: PASS -> DMESG-WARN +20
fi-kbl-7560u: PASS -> DMESG-WARN +28
fi-bwr-2160: PASS -> DMESG-WARN +16
igt@gem_exec_suspend@basic-s4-devices:
fi-cfl-s3: PASS -> DMESG-WARN +29
fi-byt-n2820: PASS -> DMESG-WARN +18
fi-elk-e7500: PASS -> DMESG-WARN +17
igt@kms_busy@basic-flip-a:
fi-kbl-7567u: PASS -> DMESG-WARN +24
fi-whl-u: PASS -> DMESG-WARN +29
igt@kms_chamelium@dp-crc-fast:
fi-kbl-7500u: PASS -> DMESG-WARN +42
igt@kms_chamelium@hdmi-crc-fast:
fi-skl-6700k2: PASS -> DMESG-WARN +44
igt@kms_flip@basic-flip-vs-dpms:
fi-ilk-650: PASS -> DMESG-WARN +33
fi-pnv-d510: PASS -> DMESG-WARN +18
fi-skl-6770hq: PASS -> DMESG-WARN +25
fi-ivb-3520m: PASS -> DMESG-WARN +24
igt@kms_flip@basic-flip-vs-modeset:
fi-cnl-u: PASS -> DMESG-WARN +25
fi-blb-e6850: PASS -> DMESG-WARN +18
fi-ivb-3770: PASS -> DMESG-WARN +24
igt@kms_flip@basic-flip-vs-wf_vblank:
fi-icl-u: PASS -> DMESG-WARN +29
fi-hsw-peppy: PASS -> DMESG-WARN +21
fi-snb-2600: PASS -> DMESG-WARN +20
igt@kms_flip@basic-plain-flip:
fi-bsw-n3050: PASS -> DMESG-WARN +11
fi-cfl-guc: PASS -> DMESG-WARN +25
igt@kms_force_connector_basic@force-load-detect:
fi-hsw-4770: PASS -> DMESG-WARN +26
igt@kms_pipe_crc_basic@hang-read-crc-pipe-b:
fi-bxt-j4205: PASS -> DMESG-WARN +24
igt@kms_pipe_crc_basic@nonblocking-crc-pipe-b:
fi-bsw-kefka: PASS -> DMESG-WARN +25
fi-bdw-5557u: PASS -> DMESG-WARN +25
fi-byt-clapper: PASS -> DMESG-WARN +16
igt@kms_pipe_crc_basic@nonblocking-crc-pipe-b-frame-sequence:
fi-bdw-samus: NOTRUN -> DMESG-WARN +17
fi-bdw-gvtdvm: PASS -> DMESG-WARN +22
igt@kms_pipe_crc_basic@nonblocking-crc-pipe-c:
fi-skl-gvtdvm: PASS -> DMESG-WARN +22
igt@kms_pipe_crc_basic@nonblocking-crc-pipe-c-frame-sequence:
fi-glk-dsi: PASS -> DMESG-WARN +25
igt@kms_pipe_crc_basic@read-crc-pipe-b:
fi-cfl-8109u: PASS -> DMESG-WARN +41
igt@kms_pipe_crc_basic@read-crc-pipe-b-frame-sequence:
fi-snb-2520m: PASS -> DMESG-WARN +17
igt@kms_pipe_crc_basic@read-crc-pipe-c-frame-sequence:
fi-bxt-dsi: PASS -> DMESG-WARN +24
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c:
fi-hsw-4770r: PASS -> DMESG-WARN +24
fi-cfl-8700k: PASS -> DMESG-WARN +25
igt@kms_psr@cursor_plane_move:
fi-kbl-r: PASS -> DMESG-WARN +27
igt@kms_psr@sprite_plane_onoff:
fi-skl-6700hq: PASS -> DMESG-WARN +28
igt@pm_rpm@basic-pci-d3-state:
fi-skl-6600u: PASS -> DMESG-WARN +29
igt@pm_rpm@basic-rte:
fi-glk-j4005: PASS -> DMESG-WARN +23
==== Warnings ====
igt@gem_exec_suspend@basic-s3:
fi-bdw-samus: INCOMPLETE (fdo#107773) -> DMESG-WARN
igt@kms_pipe_crc_basic@read-crc-pipe-b:
fi-byt-clapper: FAIL (fdo#107362) -> DMESG-WARN
igt@kms_psr@primary_page_flip:
fi-kbl-r: FAIL (fdo#107336) -> DMESG-WARN== Known issues ==
Here are the changes found in Patchwork_10225 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@drv_module_reload@basic-reload:
fi-glk-j4005: PASS -> DMESG-WARN (fdo#106725, fdo#106248)
igt@drv_module_reload@basic-reload-inject:
fi-bxt-j4205: PASS -> DMESG-WARN (fdo#107821)
fi-bxt-dsi: PASS -> DMESG-WARN (fdo#107821)
fi-hsw-4770: PASS -> DMESG-WARN (fdo#107924)
fi-hsw-peppy: PASS -> DMESG-WARN (fdo#102614, fdo#107924)
fi-hsw-4770r: PASS -> DMESG-WARN (fdo#107924)
igt@gem_exec_suspend@basic-s4-devices:
fi-kbl-7567u: PASS -> DMESG-WARN (fdo#107139)
fi-kbl-r: PASS -> DMESG-WARN (fdo#107139)
fi-kbl-7500u: PASS -> DMESG-WARN (fdo#107139)
fi-kbl-7560u: PASS -> DMESG-WARN (fdo#107139)
igt@kms_cursor_legacy@basic-flip-after-cursor-varying-size:
fi-bdw-samus: NOTRUN -> DMESG-WARN (fdo#107733) +2
igt@kms_cursor_legacy@basic-flip-before-cursor-legacy:
fi-byt-clapper: PASS -> DMESG-WARN (fdo#107751) +2
fi-byt-j1900: PASS -> DMESG-WARN (fdo#107751)
igt@kms_flip@basic-flip-vs-modeset:
fi-glk-j4005: PASS -> DMESG-WARN (fdo#106000)
igt@kms_frontbuffer_tracking@basic:
fi-hsw-peppy: PASS -> DMESG-WARN (fdo#102614) +2
fi-byt-clapper: PASS -> FAIL (fdo#103167)
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
fi-bdw-samus: NOTRUN -> INCOMPLETE (fdo#107773)
==== Warnings ====
igt@kms_psr@primary_mmap_gtt:
fi-cnl-u: FAIL (fdo#107383) -> DMESG-FAIL (fdo#107383) +3 fdo#102614 https://bugs.freedesktop.org/show_bug.cgi?id=102614
fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
fdo#106000 https://bugs.freedesktop.org/show_bug.cgi?id=106000
fdo#106248 https://bugs.freedesktop.org/show_bug.cgi?id=106248
fdo#106725 https://bugs.freedesktop.org/show_bug.cgi?id=106725
fdo#107139 https://bugs.freedesktop.org/show_bug.cgi?id=107139
fdo#107336 https://bugs.freedesktop.org/show_bug.cgi?id=107336
fdo#107362 https://bugs.freedesktop.org/show_bug.cgi?id=107362
fdo#107383 https://bugs.freedesktop.org/show_bug.cgi?id=107383
fdo#107733 https://bugs.freedesktop.org/show_bug.cgi?id=107733
fdo#107751 https://bugs.freedesktop.org/show_bug.cgi?id=107751
fdo#107773 https://bugs.freedesktop.org/show_bug.cgi?id=107773
fdo#107821 https://bugs.freedesktop.org/show_bug.cgi?id=107821
fdo#107924 https://bugs.freedesktop.org/show_bug.cgi?id=107924
== Participating hosts (52 -> 46) ==
Missing (6): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-skl-iommu
== Build changes ==
* Linux: CI_DRM_4843 -> Patchwork_10225
CI_DRM_4843: c8db7511254acf102934bbc2dcf6ca069a4281e8 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4646: d409cc6f234fbc0122c64be27ba85b5603658de5 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10225: 2f4cfd3509d5fdf1ce419eaaafe20bbb3c410ad5 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
2f4cfd3509d5 drm/i915/gen11: Expose planar format support on gen11. 64f5cc32aebb drm/i915/gen11: Program the Y and UV plane for planar mode correctly. e308838371e3 drm/i915/gen11: Program the chroma upsampler for HDR planes. 33fed8c42f7c drm/i915/gen11: Program the scalers correctly for planar formats. ec1e8d42067e drm/i915: Move programming plane scaler to its own function. 7dfbc98f126e drm/i915/gen11: Handle watermarks correctly for separate Y/UV planes. 36eaf29d48e4 drm/i915/gen11: Link nv12 Y and UV planes in the atomic state, v2. 59f05301361b drm/i915/gen11: Enable 6 sprites on gen11b7730c8c44ca drm/i915: Unconditionally clear plane_state->visible flag d79e4ec625b1 drm/i915: Force NV12 coordinates to be a multiple of 2 2bf67e55f211 drm/i915: Clean up scaler setup.16a4dc462ded drm/i915: Replace call to commit_planes_on_crtc with internal update, v2. ce778e3b4ca8 drm/i915: Make intel_crtc_disable_planes() use active planes mask. 0fd609b3d9b6 drm/i915: Handle cursor updating active_planes correctly. a4eaf927a004 drm/i915: Clean up casts to crtc_state in intel_atomic_commit_tail()
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10225/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx