ARM: dts: gta04: add serial console wakeup irq
PATCH 1/1 ARM: dts: gta04: add serial console wakeup irq
This enables the possibility to have more aggressive runtime pm by providing proper wakeup irq for the serial console.
--- arch/arm/boot/dts/omap3-gta04.dtsi | 1 + 1 file changed, 1 insertion(+)
arch/arm/boot/dts/omap3-gta04.dtsi +1 -0
@@ -493,6 +493,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; }; &charger {
Signature · 1 line
2.11.0
Quoted 2 lines · Andreas Kemnade
This enables the possibility to have more aggressive runtime pm by providing proper wakeup irq for the serial console.
Thanks applying to omap-for-v4.20/dt.
FYI, you can now grep wake /proc/interrupts and see the wakeirq counts increase when they trigger. Might be handy for debugging PM stuff.
Regards,
Tony
Hi Tony,
Quoted 10 lines · On Mon, 24 Sep 2018 15:03:45 -0700 Tony Lindgren <[email protected]> wrote:
Quoted 2 lines · Andreas Kemnade
This enables the possibility to have more aggressive runtime pm by providing proper wakeup irq for the serial console.
Thanks applying to omap-for-v4.20/dt.
FYI, you can now grep wake
/proc/interruptsand see the wakeirq counts increase when they trigger. Might be handy for debugging PM stuff.
thanks for that information, you also had a patch for checking pm which was explicitely marked as not-to-merge. Is there any up-to-date version of it?
Well, for debugging I check first average currents via bq27000 attached to omap_hdq. omap_hdq gets stuck after first transaction after idling uarts which does not happen when CM_AUTOIDLE1_CORE.AUTO_HDQ is cleared. Reloading the omap_hdq module to try to fix things makes w1 really freak out (patch already sent for that). Well, will do some rtfm and hopefully come back with a patch. afaicr there was something special...
The result are power management problem in /dev/brain ;-)
Regards,
Andreas
Quoted 11 lines · Andreas Kemnade
Hi Tony,
Quoted 6 lines · On Mon, 24 Sep 2018 15:03:45 -0700 Tony Lindgren <[email protected]> wrote:
Quoted 2 lines · Andreas Kemnade
This enables the possibility to have more aggressive runtime pm by providing proper wakeup irq for the serial console.
Thanks applying to omap-for-v4.20/dt.
Quoted 7 lines
Quoted 4 lines
FYI, you can now grep wake
/proc/interruptsand see the wakeirq counts increase when they trigger. Might be handy for debugging PM stuff.thanks for that information, you also had a patch for checking pm which was explicitely marked as not-to-merge. Is there any up-to-date version of it?
It's still the same so no updates to it.
Quoted 7 lines
Well, for debugging I check first average currents via bq27000 attached to
omap_hdq.omap_hdqgets stuck after first transaction after idling uarts which does not happen when CM_AUTOIDLE1_CORE.AUTO_HDQ is cleared. Reloading theomap_hdqmodule to try to fix things makes w1 really freak out (patch already sent for that). Well, will do some rtfm and hopefully come back with a patch. afaicr there was something special...
Hmm sounds like drivers/w1/masters/omap_hdq.c needs to implement PM runtime calls, it's probably just enabled because of only needing the interconnect fck that the uart happens to keep enabled.
Quoted 1 line
The result are power management problem in
/dev/brain;-)
:)
Tony