Skip to contentSkip to conversation

video: Add support for NXP's TDA19988 HDMI encoder

PATCH Superseded Liviu Dudau 2 participants 4 messages Sep 17, 2018 – Sep 29, 2018 Framebuffer layer

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 video: Add support for NXP's TDA19988 HDMI encoder

Add support for the NXP TDA19988 HDMI encoder as used on the Juno development board from Arm.

---
 drivers/video/Kconfig    |   7 +
 drivers/video/Makefile   |   1 +
 drivers/video/tda19988.c | 637 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 645 insertions(+)
 create mode 100644 drivers/video/tda19988.c
drivers/video/Kconfig +7 -0
index ed0b21f2a7..9f21ef30a9 100644
@@ -431,6 +431,13 @@ config DISPLAY
 	   The devices provide a simple interface to start up the display,
 	   read display information and enable it.
 
+config NXP_TDA19988
+	bool "Enable NXP TDA19988 support"
+	depends on DISPLAY
+	default n
+	help
+	  This enables support for the NXP TDA19988 HDMI encoder.
+
 config ATMEL_HLCD
 	bool "Enable ATMEL video support using HLCDC"
 	depends on DM_VIDEO
drivers/video/Makefile +1 -0
index 0f41a23193..4c130e179d 100644
@@ -31,6 +31,7 @@ obj-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o
 obj-$(CONFIG_LD9040) += ld9040.o
 obj-$(CONFIG_LG4573) += lg4573.o
 obj-$(CONFIG_LOGICORE_DP_TX) += logicore_dp_tx.o
+obj-$(CONFIG_NXP_TDA19988) += tda19988.o
 obj-$(CONFIG_PXA_LCD) += pxa_lcd.o
 obj-$(CONFIG_S6E8AX0) += s6e8ax0.o
 obj-$(CONFIG_SCF0403_LCD) += scf0403_lcd.o
drivers/video/tda19988.c new file +637 -0

637 lines not on this page · raw message

Signature · 1 line
2.18.0
#1 lore raw

PATCH 1/1 video: Add support for NXP's TDA19988 HDMI encoder

Hi,

Quoted 10 lines · On Mon, 17 Sep 2018 17:52:54 +0100 Liviu Dudau Liviu.Dudau at foss.arm.com…

Add support for the NXP TDA19988 HDMI encoder as used on the Juno development board from Arm.

---
 drivers/video/Kconfig    |   7 +
 drivers/video/Makefile   |   1 +
 drivers/video/tda19988.c | 637 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 645 insertions(+)
 create mode 100644 drivers/video/tda19988.c

There are some issues reported by checkpatch, please fix. Thanks!

--
Anatolij

#2 lore raw

PATCH v2 1/1 video: Add support for NXP's TDA19988 HDMI encoder

Add support for the NXP TDA19988 HDMI encoder as used on the Juno development board from Arm.

---
Changelog:
- v2: Added MAINTAINERS entry and fixed checkpatch warnings.

 MAINTAINERS              |   5 +
 drivers/video/Kconfig    |   8 +
 drivers/video/Makefile   |   1 +
 drivers/video/tda19988.c | 653 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 667 insertions(+)
 create mode 100644 drivers/video/tda19988.c
MAINTAINERS +5 -0
index 11fc404167..112e41d2c3 100644
@@ -598,6 +598,11 @@ S:	Maintained
 F:	drivers/spmi/
 F:	include/spmi/
 
+TDA19988 HDMI ENCODER
+M:	Liviu Dudau <[email protected]>
+S:	Maintained
+F:	drivers/video/tda19988.c
+
 TI SYSTEM SECURITY
 M:	Andrew F. Davis <[email protected]>
 S:	Supported
drivers/video/Kconfig +8 -0
index ed0b21f2a7..5d932072a8 100644
@@ -431,6 +431,14 @@ config DISPLAY
 	   The devices provide a simple interface to start up the display,
 	   read display information and enable it.
 
+config NXP_TDA19988
+	bool "Enable NXP TDA19988 support"
+	depends on DISPLAY
+	default n
+	help
+	  This enables support for the NXP TDA19988 HDMI encoder. This encoder
+	  will convert RGB data streams into HDMI-encoded signals.
+
 config ATMEL_HLCD
 	bool "Enable ATMEL video support using HLCDC"
 	depends on DM_VIDEO
drivers/video/Makefile +1 -0
index 0f41a23193..4c130e179d 100644
@@ -31,6 +31,7 @@ obj-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o
 obj-$(CONFIG_LD9040) += ld9040.o
 obj-$(CONFIG_LG4573) += lg4573.o
 obj-$(CONFIG_LOGICORE_DP_TX) += logicore_dp_tx.o
+obj-$(CONFIG_NXP_TDA19988) += tda19988.o
 obj-$(CONFIG_PXA_LCD) += pxa_lcd.o
 obj-$(CONFIG_S6E8AX0) += s6e8ax0.o
 obj-$(CONFIG_SCF0403_LCD) += scf0403_lcd.o
drivers/video/tda19988.c new file +653 -0

653 lines not on this page · raw message

Signature · 1 line
2.18.0
#3 lore raw

PATCH v2 1/1 video: Add support for NXP's TDA19988 HDMI encoder

Quoted 8 lines · On Fri, 28 Sep 2018 13:49:31 +0100 Liviu Dudau Liviu.Dudau at foss.arm.com…

Add support for the NXP TDA19988 HDMI encoder as used on the Juno development board from Arm.

---
Changelog:
- v2: Added MAINTAINERS entry and fixed checkpatch warnings.

Quoted 6 lines
 MAINTAINERS              |   5 +
 drivers/video/Kconfig    |   8 +
 drivers/video/Makefile   |   1 +
 drivers/video/tda19988.c | 653 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 667 insertions(+)
 create mode 100644 drivers/video/tda19988.c

Applied to u-boot-video/master, thanks!

--
Anatolij