video: Add support for NXP's TDA19988 HDMI encoder
PATCH 1/1 video: Add support for NXP's TDA19988 HDMI encoder
Add support for the NXP TDA19988 HDMI encoder as used on the Juno development board from Arm.
--- drivers/video/Kconfig | 7 + drivers/video/Makefile | 1 + drivers/video/tda19988.c | 637 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 645 insertions(+) create mode 100644 drivers/video/tda19988.c
drivers/video/Kconfig +7 -0
@@ -431,6 +431,13 @@ config DISPLAY The devices provide a simple interface to start up the display, read display information and enable it. +config NXP_TDA19988 + bool "Enable NXP TDA19988 support" + depends on DISPLAY + default n + help + This enables support for the NXP TDA19988 HDMI encoder. + config ATMEL_HLCD bool "Enable ATMEL video support using HLCDC" depends on DM_VIDEO
drivers/video/Makefile +1 -0
@@ -31,6 +31,7 @@ obj-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o obj-$(CONFIG_LD9040) += ld9040.o obj-$(CONFIG_LG4573) += lg4573.o obj-$(CONFIG_LOGICORE_DP_TX) += logicore_dp_tx.o +obj-$(CONFIG_NXP_TDA19988) += tda19988.o obj-$(CONFIG_PXA_LCD) += pxa_lcd.o obj-$(CONFIG_S6E8AX0) += s6e8ax0.o obj-$(CONFIG_SCF0403_LCD) += scf0403_lcd.o
drivers/video/tda19988.c new file +637 -0
637 lines not on this page · raw message
Signature · 1 line
2.18.0
PATCH 1/1 video: Add support for NXP's TDA19988 HDMI encoder
Hi,
Quoted 10 lines · On Mon, 17 Sep 2018 17:52:54 +0100 Liviu Dudau Liviu.Dudau at foss.arm.com…
Add support for the NXP TDA19988 HDMI encoder as used on the Juno development board from Arm.
Signed-off-by Liviu Dudau <[email protected]>--- drivers/video/Kconfig | 7 + drivers/video/Makefile | 1 + drivers/video/tda19988.c | 637 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 645 insertions(+) create mode 100644 drivers/video/tda19988.c
There are some issues reported by checkpatch, please fix. Thanks!
--
Anatolij
PATCH v2 1/1 video: Add support for NXP's TDA19988 HDMI encoder
Add support for the NXP TDA19988 HDMI encoder as used on the Juno development board from Arm.
---
Changelog:
- v2: Added MAINTAINERS entry and fixed checkpatch warnings.
MAINTAINERS | 5 + drivers/video/Kconfig | 8 + drivers/video/Makefile | 1 + drivers/video/tda19988.c | 653 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 667 insertions(+) create mode 100644 drivers/video/tda19988.c
MAINTAINERS +5 -0
@@ -598,6 +598,11 @@ S: Maintained F: drivers/spmi/ F: include/spmi/ +TDA19988 HDMI ENCODER +M: Liviu Dudau <[email protected]> +S: Maintained +F: drivers/video/tda19988.c + TI SYSTEM SECURITY M: Andrew F. Davis <[email protected]> S: Supported
drivers/video/Kconfig +8 -0
@@ -431,6 +431,14 @@ config DISPLAY The devices provide a simple interface to start up the display, read display information and enable it. +config NXP_TDA19988 + bool "Enable NXP TDA19988 support" + depends on DISPLAY + default n + help + This enables support for the NXP TDA19988 HDMI encoder. This encoder + will convert RGB data streams into HDMI-encoded signals. + config ATMEL_HLCD bool "Enable ATMEL video support using HLCDC" depends on DM_VIDEO
drivers/video/Makefile +1 -0
@@ -31,6 +31,7 @@ obj-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o obj-$(CONFIG_LD9040) += ld9040.o obj-$(CONFIG_LG4573) += lg4573.o obj-$(CONFIG_LOGICORE_DP_TX) += logicore_dp_tx.o +obj-$(CONFIG_NXP_TDA19988) += tda19988.o obj-$(CONFIG_PXA_LCD) += pxa_lcd.o obj-$(CONFIG_S6E8AX0) += s6e8ax0.o obj-$(CONFIG_SCF0403_LCD) += scf0403_lcd.o
drivers/video/tda19988.c new file +653 -0
653 lines not on this page · raw message
Signature · 1 line
2.18.0
PATCH v2 1/1 video: Add support for NXP's TDA19988 HDMI encoder
Quoted 8 lines · On Fri, 28 Sep 2018 13:49:31 +0100 Liviu Dudau Liviu.Dudau at foss.arm.com…
Add support for the NXP TDA19988 HDMI encoder as used on the Juno development board from Arm.
Signed-off-by Liviu Dudau <[email protected]>---
Changelog:
- v2: AddedMAINTAINERSentry and fixed checkpatch warnings.
Quoted 6 lines
MAINTAINERS | 5 + drivers/video/Kconfig | 8 + drivers/video/Makefile | 1 + drivers/video/tda19988.c | 653 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 667 insertions(+) create mode 100644 drivers/video/tda19988.c
Applied to u-boot-video/master, thanks!
--
Anatolij