drm/i915: Fix VIDEO_DIP_CTL bit shifts
Subsystems (2)
PATCH 1/1 drm/i915: Fix VIDEO_DIP_CTL bit shifts
The shifts for VSC_SELECT bits are wrong, fix it. Good thing is the definitions are unused.
--- drivers/gpu/drm/i915/i915_reg.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +9 -9
@@ -4584,6 +4584,15 @@ enum {#define VIDEO_DIP_FREQ_2VSYNC (2 << 16)#define VIDEO_DIP_FREQ_MASK (3 << 16)/* HSW and later: */ +#define DRM_DIP_ENABLE (1 << 28) +#define PSR_VSC_BIT_7_SET (1 << 27) +#define VSC_SELECT_MASK (0x3 << 25) +#define VSC_SELECT_SHIFT 25 +#define VSC_DIP_HW_HEA_DATA (0 << 25) +#define VSC_DIP_HW_HEA_SW_DATA (1 << 25) +#define VSC_DIP_HW_DATA_SW_HEA (2 << 25) +#define VSC_DIP_SW_HEA_DATA (3 << 25) +#define VDIP_ENABLE_PPS (1 << 24)#define VIDEO_DIP_ENABLE_VSC_HSW (1 << 20)#define VIDEO_DIP_ENABLE_GCP_HSW (1 << 16)#define VIDEO_DIP_ENABLE_AVI_HSW (1 << 12)
@@ -4591,15 +4600,6 @@ enum {#define VIDEO_DIP_ENABLE_GMP_HSW (1 << 4)#define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0) -#define DRM_DIP_ENABLE (1 << 28) -#define PSR_VSC_BIT_7_SET (1 << 27) -#define VSC_SELECT_MASK (0x3 << 26) -#define VSC_SELECT_SHIFT 26 -#define VSC_DIP_HW_HEA_DATA (0 << 26) -#define VSC_DIP_HW_HEA_SW_DATA (1 << 26) -#define VSC_DIP_HW_DATA_SW_HEA (2 << 26) -#define VSC_DIP_SW_HEA_DATA (3 << 26) -#define VDIP_ENABLE_PPS (1 << 24)/* Panel power sequencing */ #define PPS_BASE 0x61200
Signature · 6 lines
2.14.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915: Fix VIDEO_DIP_CTL bit shifts
== Series Details ==
== Series Details ==
Series: drm/i915: Fix VIDEO_DIP_CTL bit shifts
URL : https://patchwork.freedesktop.org/series/50573/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4932 -> Patchwork_10365 =
== Summary - SUCCESS ==
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/50573/revisions/1/mbox/
== Known issues ==
Here are the changes found in Patchwork_10365 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@kms_flip@basic-flip-vs-dpms:
fi-bxt-dsi: PASS -> INCOMPLETE (fdo#103927)fdo#103927 https://bugs.freedesktop.org/show_bug.cgi?id=103927
== Participating hosts (48 -> 39) ==
Missing (9): fi-hsw-4770r fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-icl-u2 fi-bwr-2160 fi-bsw-cyan fi-ctg-p8600 fi-bdw-samus
== Build changes ==
* Linux: CI_DRM_4932 -> Patchwork_10365
CI_DRM_4932: 21f90148bf7adb33d82580013a5697a6bbb88248 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4669: 5f40e617cd9c1e089f4a2d79c53a417d891e3e3c @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10365: dabd694408ac19e4f366640c15665211e4de0e53 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
dabd694408ac drm/i915: Fix VIDEO_DIP_CTL bit shifts
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10365/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 2 lines · Dhinakaran Pandiyan
The shifts for
VSC_SELECTbits are wrong, fix it. Good thing is the definitions are unused.
If they are unused why are we fixing them instead of removing? Or better, why did we add them?
Lucas De Marchi
Quoted 53 lines
Cc Manasi Navare <[email protected]>Cc Anusha Srivatsa <[email protected]>Cc Rodrigo Vivi <[email protected]>Fixes 7af2be6d54d4 ("drm/i915/icl: Add VIDEO_DIP registers")Signed-off-by Dhinakaran Pandiyan <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)drivers/gpu/drm/i915/i915_reg.h +9
-9@@ -4584,6 +4584,15 @@ enum {#define VIDEO_DIP_FREQ_2VSYNC (2 << 16)#define VIDEO_DIP_FREQ_MASK (3 << 16)/* HSW and later: */ +#define DRM_DIP_ENABLE (1 << 28) +#define PSR_VSC_BIT_7_SET (1 << 27) +#define VSC_SELECT_MASK (0x3 << 25) +#define VSC_SELECT_SHIFT 25 +#define VSC_DIP_HW_HEA_DATA (0 << 25) +#define VSC_DIP_HW_HEA_SW_DATA (1 << 25) +#define VSC_DIP_HW_DATA_SW_HEA (2 << 25) +#define VSC_DIP_SW_HEA_DATA (3 << 25) +#define VDIP_ENABLE_PPS (1 << 24)#define VIDEO_DIP_ENABLE_VSC_HSW (1 << 20)#define VIDEO_DIP_ENABLE_GCP_HSW (1 << 16)#define VIDEO_DIP_ENABLE_AVI_HSW (1 << 12)@@ -4591,15 +4600,6 @@ enum {#define VIDEO_DIP_ENABLE_GMP_HSW (1 << 4)#define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0) -#define DRM_DIP_ENABLE (1 << 28) -#define PSR_VSC_BIT_7_SET (1 << 27) -#define VSC_SELECT_MASK (0x3 << 26) -#define VSC_SELECT_SHIFT 26 -#define VSC_DIP_HW_HEA_DATA (0 << 26) -#define VSC_DIP_HW_HEA_SW_DATA (1 << 26) -#define VSC_DIP_HW_DATA_SW_HEA (2 << 26) -#define VSC_DIP_SW_HEA_DATA (3 << 26) -#define VDIP_ENABLE_PPS (1 << 24)/* Panel power sequencing */ #define PPS_BASE 0x61200Signature · 6 lines
2.14.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 7 lines · Lucas De Marchi
Quoted 2 lines · Dhinakaran Pandiyan
The shifts for
VSC_SELECTbits are wrong, fix it. Good thing is the definitions are unused.If they are unused why are we fixing them instead of removing? Or better,
why did we add them?
I guess there are plans to make use of them, no idea.
Quoted 53 lines
Lucas De Marchi
Quoted 50 lines
Cc Manasi Navare <[email protected]>Cc Anusha Srivatsa <[email protected]>Cc Rodrigo Vivi <[email protected]>Fixes 7af2be6d54d4 ("drm/i915/icl: Add VIDEO_DIP registers")Signed-off-by Dhinakaran Pandiyan <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)drivers/gpu/drm/i915/i915_reg.h +9
-9@@ -4584,6 +4584,15 @@ enum {#define VIDEO_DIP_FREQ_2VSYNC (2 << 16)#define VIDEO_DIP_FREQ_MASK (3 << 16)/* HSW and later: */ +#define DRM_DIP_ENABLE (1 << 28) +#define PSR_VSC_BIT_7_SET (1 << 27) +#define VSC_SELECT_MASK (0x3 << 25) +#define VSC_SELECT_SHIFT 25 +#define VSC_DIP_HW_HEA_DATA (0 << 25) +#define VSC_DIP_HW_HEA_SW_DATA (1 << 25) +#define VSC_DIP_HW_DATA_SW_HEA (2 << 25) +#define VSC_DIP_SW_HEA_DATA (3 << 25) +#define VDIP_ENABLE_PPS (1 << 24)#define VIDEO_DIP_ENABLE_VSC_HSW (1 << 20)#define VIDEO_DIP_ENABLE_GCP_HSW (1 << 16)#define VIDEO_DIP_ENABLE_AVI_HSW (1 << 12)@@ -4591,15 +4600,6 @@ enum {#define VIDEO_DIP_ENABLE_GMP_HSW (1 << 4)#define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0) -#define DRM_DIP_ENABLE (1 << 28) -#define PSR_VSC_BIT_7_SET (1 << 27) -#define VSC_SELECT_MASK (0x3 << 26) -#define VSC_SELECT_SHIFT 26 -#define VSC_DIP_HW_HEA_DATA (0 << 26) -#define VSC_DIP_HW_HEA_SW_DATA (1 << 26) -#define VSC_DIP_HW_DATA_SW_HEA (2 << 26) -#define VSC_DIP_SW_HEA_DATA (3 << 26) -#define VDIP_ENABLE_PPS (1 << 24)/* Panel power sequencing */ #define PPS_BASE 0x61200Signature · 1 line
2.14.1
Quoted 4 lines
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 10 lines · Dhinakaran Pandiyan
Quoted 7 lines · Lucas De Marchi
Quoted 2 lines · Dhinakaran Pandiyan
The shifts for
VSC_SELECTbits are wrong, fix it. Good thing is the definitions are unused.If they are unused why are we fixing them instead of removing? Or better,
why did we add them?I guess there are plans to make use of them, no idea.
Yes, the VDIP_RNABLE_PPS and DIP enables get used in the DSC patch series:
https://patchwork.freedesktop.org/series/47514/
If you want I can combine this fixes patch with the new revision of DSC patchseries I am about to send out
Manasi
Quoted 55 lines
Cc Anusha, ManasiQuoted 53 lines
Lucas De Marchi
Quoted 50 lines
Cc Manasi Navare <[email protected]>Cc Anusha Srivatsa <[email protected]>Cc Rodrigo Vivi <[email protected]>Fixes 7af2be6d54d4 ("drm/i915/icl: Add VIDEO_DIP registers")Signed-off-by Dhinakaran Pandiyan <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)drivers/gpu/drm/i915/i915_reg.h +9
-9@@ -4584,6 +4584,15 @@ enum {#define VIDEO_DIP_FREQ_2VSYNC (2 << 16)#define VIDEO_DIP_FREQ_MASK (3 << 16)/* HSW and later: */ +#define DRM_DIP_ENABLE (1 << 28) +#define PSR_VSC_BIT_7_SET (1 << 27) +#define VSC_SELECT_MASK (0x3 << 25) +#define VSC_SELECT_SHIFT 25 +#define VSC_DIP_HW_HEA_DATA (0 << 25) +#define VSC_DIP_HW_HEA_SW_DATA (1 << 25) +#define VSC_DIP_HW_DATA_SW_HEA (2 << 25) +#define VSC_DIP_SW_HEA_DATA (3 << 25) +#define VDIP_ENABLE_PPS (1 << 24)#define VIDEO_DIP_ENABLE_VSC_HSW (1 << 20)#define VIDEO_DIP_ENABLE_GCP_HSW (1 << 16)#define VIDEO_DIP_ENABLE_AVI_HSW (1 << 12)@@ -4591,15 +4600,6 @@ enum {#define VIDEO_DIP_ENABLE_GMP_HSW (1 << 4)#define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0) -#define DRM_DIP_ENABLE (1 << 28) -#define PSR_VSC_BIT_7_SET (1 << 27) -#define VSC_SELECT_MASK (0x3 << 26) -#define VSC_SELECT_SHIFT 26 -#define VSC_DIP_HW_HEA_DATA (0 << 26) -#define VSC_DIP_HW_HEA_SW_DATA (1 << 26) -#define VSC_DIP_HW_DATA_SW_HEA (2 << 26) -#define VSC_DIP_SW_HEA_DATA (3 << 26) -#define VDIP_ENABLE_PPS (1 << 24)/* Panel power sequencing */ #define PPS_BASE 0x61200Signature · 1 line
2.14.1
Quoted 5 lines
Quoted 4 lines
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 15 lines · Manasi Navare
Quoted 7 lines · Dhinakaran Pandiyan
Quoted 6 lines · Lucas De Marchi
Quoted 3 lines · Dhinakaran Pandiyan
The shifts for
VSC_SELECTbits are wrong, fix it. Good thing is the
definitions are unused.Quoted 6 lines
Quoted 3 lines
If they are unused why are we fixing them instead of removing? Or better,
why did we add them?I guess there are plans to make use of them, no idea.
Quoted 8 lines
Yes, the
VDIP_RNABLE_PPSand DIP enables get used in the DSC patch series:https://patchwork.freedesktop.org/series/47514/
If you want I can combine this fixes patch with the new revision of DSC patchseries
I am about to send out
That might create an unnecessary dependency on the series getting merged. We'll have to program these bits for PSR2 from the looks of it. Let's get this into the tree soon, can you please review the fix?
-DK
Quoted 59 lines
Manasi
Quoted 56 lines
Cc Anusha, ManasiQuoted 54 lines
Lucas De Marchi
Quoted 51 lines
Cc Manasi Navare <[email protected]>Cc Anusha Srivatsa <[email protected]>Cc Rodrigo Vivi <[email protected]>Fixes 7af2be6d54d4 ("drm/i915/icl: Add VIDEO_DIP registers")Signed-off-by Dhinakaran Pandiyan <--- drivers/gpu/drm/i915/i915_reg.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)drivers/gpu/drm/i915/i915_reg.h +9
-9@@ -4584,6 +4584,15 @@ enum {#define VIDEO_DIP_FREQ_2VSYNC (2 << 16)#define VIDEO_DIP_FREQ_MASK (3 << 16)/* HSW and later: */ +#define DRM_DIP_ENABLE (1 << 28) +#define PSR_VSC_BIT_7_SET (1 << 27) +#define VSC_SELECT_MASK (0x3 << 25) +#define VSC_SELECT_SHIFT 25 +#define VSC_DIP_HW_HEA_DATA (0 << 25) +#define VSC_DIP_HW_HEA_SW_DATA (1 << 25) +#define VSC_DIP_HW_DATA_SW_HEA (2 << 25) +#define VSC_DIP_SW_HEA_DATA (3 << 25) +#define VDIP_ENABLE_PPS (1 << 24)#define VIDEO_DIP_ENABLE_VSC_HSW (1 << 20)#define VIDEO_DIP_ENABLE_GCP_HSW (1 << 16)#define VIDEO_DIP_ENABLE_AVI_HSW (1 << 12)@@ -4591,15 +4600,6 @@ enum {#define VIDEO_DIP_ENABLE_GMP_HSW (1 << 4)#define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0) -#define DRM_DIP_ENABLE (1 << 28) -#define PSR_VSC_BIT_7_SET (1 << 27) -#define VSC_SELECT_MASK (0x3 << 26) -#define VSC_SELECT_SHIFT 26 -#define VSC_DIP_HW_HEA_DATA (0 << 26) -#define VSC_DIP_HW_HEA_SW_DATA (1 << 26) -#define VSC_DIP_HW_DATA_SW_HEA (2 << 26) -#define VSC_DIP_SW_HEA_DATA (3 << 26) -#define VDIP_ENABLE_PPS (1 << 24)/* Panel power sequencing */ #define PPS_BASE 0x61200Signature · 1 line
2.14.1
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Manasi Navare
Reviewed-byQuoted 8 lines · Dhinakaran Pandiyan
Quoted 7 lines · Manasi Navare
Quoted 6 lines · Dhinakaran Pandiyan
Quoted 5 lines · Lucas De Marchi
Quoted 3 lines · Dhinakaran Pandiyan
The shifts for
VSC_SELECTbits are wrong, fix it. Good thing is the
definitions are unused.
No need to mention that defs are unused in the commit since that will not make sense once the patches get merged that start using these.
More comments below
Quoted 67 lines
Quoted 8 lines
Quoted 7 lines
Quoted 4 lines
If they are unused why are we fixing them instead of removing? Or better,
why did we add them?I guess there are plans to make use of them, no idea.
Quoted 8 lines
Yes, the
VDIP_RNABLE_PPSand DIP enables get used in the DSC patch series:https://patchwork.freedesktop.org/series/47514/
If you want I can combine this fixes patch with the new revision of DSC patchseries
I am about to send outThat might create an unnecessary dependency on the series getting merged. We'll have to program these bits for PSR2 from the looks of it. Let's get this into the tree soon, can you please review the fix?
-DK
Quoted 44 lines
Manasi
Quoted 41 lines
Cc Anusha, ManasiQuoted 39 lines
Lucas De Marchi
Quoted 36 lines
Cc Manasi Navare <[email protected]>Cc Anusha Srivatsa <[email protected]>Cc Rodrigo Vivi <[email protected]>Fixes 7af2be6d54d4 ("drm/i915/icl: Add VIDEO_DIP registers")Signed-off-by Dhinakaran Pandiyan <--- drivers/gpu/drm/i915/i915_reg.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)drivers/gpu/drm/i915/i915_reg.h +9
-0@@ -4584,6 +4584,15 @@ enum {#define VIDEO_DIP_FREQ_2VSYNC (2 << 16)#define VIDEO_DIP_FREQ_MASK (3 << 16)/* HSW and later: */ +#define DRM_DIP_ENABLE (1 << 28) +#define PSR_VSC_BIT_7_SET (1 << 27) +#define VSC_SELECT_MASK (0x3 << 25) +#define VSC_SELECT_SHIFT 25 +#define VSC_DIP_HW_HEA_DATA (0 << 25) +#define VSC_DIP_HW_HEA_SW_DATA (1 << 25) +#define VSC_DIP_HW_DATA_SW_HEA (2 << 25) +#define VSC_DIP_SW_HEA_DATA (3 << 25) +#define VDIP_ENABLE_PPS (1 << 24)#define VIDEO_DIP_ENABLE_VSC_HSW (1 << 20)#define VIDEO_DIP_ENABLE_GCP_HSW (1 << 16)#define VIDEO_DIP_ENABLE_AVI_HSW (1 << 12)@@ -4591,15 +4600,6 @@ enum {#define VIDEO_DIP_ENABLE_GMP_HSW (1 << 4)#define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0)
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
drivers/gpu/drm/i915/i915_reg.h enum { · line 4602
Quoted 9 lines
drivers/gpu/drm/i915/i915_reg.h +0
-9-#define DRM_DIP_ENABLE (1 << 28) -#define PSR_VSC_BIT_7_SET (1 << 27) -#define VSC_SELECT_MASK (0x3 << 26) -#define VSC_SELECT_SHIFT 26 -#define VSC_DIP_HW_HEA_DATA (0 << 26) -#define VSC_DIP_HW_HEA_SW_DATA (1 << 26) -#define VSC_DIP_HW_DATA_SW_HEA (2 << 26) -#define VSC_DIP_SW_HEA_DATA (3 << 26) -#define VDIP_ENABLE_PPS (1 << 24)
Why do you need to remove all of these defs?
From the spec, the only shift thats wrong is :VSC_SELECT_MASK (0x3 << 26)
#define VSC_SELECT_SHIFT 26 #define VSC_DIP_HW_HEA_DATA (0 << 26) define VSC_DIP_HW_HEA_SW_DATA (1 << 26) define VSC_DIP_HW_DATA_SW_HEA (2 << 26)
VSC_DIP_SW_HEA_DATA (3 << 26)
Removing others and redefining to be the same is misleading
Other than that the actual fixes look good, double checked with the spec. So after the above fix and the commit message fix
Manasi
Quoted 11 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
drivers/gpu/drm/i915/i915_reg.h +0
-0/* Panel power sequencing */ #define PPS_BASE 0x61200Signature · 6 lines
2.14.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 7 lines · Manasi Navare
Quoted 6 lines · Dhinakaran Pandiyan
Quoted 5 lines · Manasi Navare
Quoted 3 lines · Dhinakaran Pandiyan
Quoted 2 lines · Lucas De Marchi
On Thu, Oct 04, 2018 at 01:51:49PM -0700, Dhinakaran Pandiyan wrote:
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
The shifts for
VSC_SELECTbits are wrong, fix it. Good thing is
the
definitions are unused.No need to mention that defs are unused in the commit since that will not make sense
once the patches get merged that start using these.
Well, the patch is based on the current state of the code base.
Quoted 88 lines
More comments below
Quoted 72 lines
Quoted 13 lines
Quoted 8 lines
Quoted 5 lines
If they are unused why are we fixing them instead of removing? Or
better,
why did we add them?I guess there are plans to make use of them, no idea.
Yes, the
VDIP_RNABLE_PPSand DIP enables get used in the DSC patch
series:Quoted 6 lines
https://patchwork.freedesktop.org/series/47514/
If you want I can combine this fixes patch with the new revision of
DSC patchseries
I am about to send outThat might create an unnecessary dependency on the series getting merged. We'll have to program these bits for PSR2 from the looks of it.
Let's get this into the tree soon, can you please review the fix?-DK
Quoted 45 lines
Manasi
Quoted 42 lines
Cc Anusha, ManasiQuoted 40 lines
Lucas De Marchi
Quoted 37 lines
Cc Manasi Navare <[email protected]>Cc Anusha Srivatsa <[email protected]>Cc Rodrigo Vivi <[email protected]>Fixes 7af2be6d54d4 ("drm/i915/icl: Add VIDEO_DIPregisters")
Signed-off-by: Dhinakaran Pandiyan < [email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)drivers/gpu/drm/i915/i915_reg.h +9
-0@@ -4584,6 +4584,15 @@ enum {#define VIDEO_DIP_FREQ_2VSYNC (2 << 16)#define VIDEO_DIP_FREQ_MASK (3 << 16)/* HSW and later: */ +#define DRM_DIP_ENABLE (1 << 28) +#define PSR_VSC_BIT_7_SET (1 << 27) +#define VSC_SELECT_MASK (0x3 << 25) +#define VSC_SELECT_SHIFT 25 +#define VSC_DIP_HW_HEA_DATA (0 << 25) +#define VSC_DIP_HW_HEA_SW_DATA (1 << 25) +#define VSC_DIP_HW_DATA_SW_HEA (2 << 25) +#define VSC_DIP_SW_HEA_DATA (3 << 25) +#define VDIP_ENABLE_PPS (1 << 24)#define VIDEO_DIP_ENABLE_VSC_HSW (1 << 20)#define VIDEO_DIP_ENABLE_GCP_HSW (1 << 16)#define VIDEO_DIP_ENABLE_AVI_HSW (1 << 12)@@ -4591,15 +4600,6 @@ enum {#define VIDEO_DIP_ENABLE_GMP_HSW (1 << 4)#define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0)Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
drivers/gpu/drm/i915/i915_reg.h enum { · line 4602
Quoted 9 lines
drivers/gpu/drm/i915/i915_reg.h +0
-9-#define DRM_DIP_ENABLE (1 << 28) -#define PSR_VSC_BIT_7_SET (1 << 27) -#define VSC_SELECT_MASK (0x3 << 26) -#define VSC_SELECT_SHIFT 26 -#define VSC_DIP_HW_HEA_DATA (0 << 26) -#define VSC_DIP_HW_HEA_SW_DATA (1 << 26) -#define VSC_DIP_HW_DATA_SW_HEA (2 << 26) -#define VSC_DIP_SW_HEA_DATA (3 << 26) -#define VDIP_ENABLE_PPS (1 << 24)Why do you need to remove all of these defs?
From the spec, the only shift thats wrong is :VSC_SELECT_MASK(0x3<< 26)
Quoted 7 lines
#define VSC_SELECT_SHIFT 26 #define VSC_DIP_HW_HEA_DATA (0 << 26) define VSC_DIP_HW_HEA_SW_DATA (1 << 26) define VSC_DIP_HW_DATA_SW_HEA (2 << 26)
VSC_DIP_SW_HEA_DATA(3 << 26)Removing others and redefining to be the same is misleading
Please see other definitions in the file and the documentation above, we generally organize bit definitions in the descending order of their position.
Quoted 19 lines
Other than that the actual fixes look good, double checked with the spec.
So after the above fix and the commit message fixReviewed-by Manasi Navare <[email protected]>Manasi
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
drivers/gpu/drm/i915/i915_reg.h +0
-0/* Panel power sequencing */ #define PPS_BASE 0x61200Signature · 6 lines
2.14.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 13 lines · Dhinakaran Pandiyan
Quoted 12 lines · Manasi Navare
Quoted 10 lines · Dhinakaran Pandiyan
Quoted 9 lines · Manasi Navare
Quoted 7 lines · Dhinakaran Pandiyan
Quoted 6 lines · Lucas De Marchi
Quoted 4 lines · Dhinakaran Pandiyan
The shifts for
VSC_SELECTbits are wrong, fix it. Good thing is
the
definitions are unused.
Quoted 5 lines
Quoted 3 lines
No need to mention that defs are unused in the commit since that will not make sense
once the patches get merged that start using these.Well, the patch is based on the current state of the code base.
Well IMHO that statement is still redundant and more expressive than informative. Mentioning that this is
a fix for VSC SELECT should suffice. But thats a nitcpick, so its your call.
Quoted 94 lines
Quoted 94 lines
More comments below
Quoted 72 lines
Quoted 13 lines
Quoted 8 lines
Quoted 5 lines
If they are unused why are we fixing them instead of removing? Or
better,
why did we add them?I guess there are plans to make use of them, no idea.
Yes, the
VDIP_RNABLE_PPSand DIP enables get used in the DSC patch
series:Quoted 6 lines
https://patchwork.freedesktop.org/series/47514/
If you want I can combine this fixes patch with the new revision of
DSC patchseries
I am about to send outThat might create an unnecessary dependency on the series getting merged. We'll have to program these bits for PSR2 from the looks of it.
Let's get this into the tree soon, can you please review the fix?-DK
Quoted 45 lines
Manasi
Quoted 42 lines
Cc Anusha, ManasiQuoted 40 lines
Lucas De Marchi
Quoted 37 lines
Cc Manasi Navare <[email protected]>Cc Anusha Srivatsa <[email protected]>Cc Rodrigo Vivi <[email protected]>Fixes 7af2be6d54d4 ("drm/i915/icl: Add VIDEO_DIPregisters")
Signed-off-by: Dhinakaran Pandiyan < [email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)drivers/gpu/drm/i915/i915_reg.h +9
-0@@ -4584,6 +4584,15 @@ enum {#define VIDEO_DIP_FREQ_2VSYNC (2 << 16)#define VIDEO_DIP_FREQ_MASK (3 << 16)/* HSW and later: */ +#define DRM_DIP_ENABLE (1 << 28) +#define PSR_VSC_BIT_7_SET (1 << 27) +#define VSC_SELECT_MASK (0x3 << 25) +#define VSC_SELECT_SHIFT 25 +#define VSC_DIP_HW_HEA_DATA (0 << 25) +#define VSC_DIP_HW_HEA_SW_DATA (1 << 25) +#define VSC_DIP_HW_DATA_SW_HEA (2 << 25) +#define VSC_DIP_SW_HEA_DATA (3 << 25) +#define VDIP_ENABLE_PPS (1 << 24)#define VIDEO_DIP_ENABLE_VSC_HSW (1 << 20)#define VIDEO_DIP_ENABLE_GCP_HSW (1 << 16)#define VIDEO_DIP_ENABLE_AVI_HSW (1 << 12)@@ -4591,15 +4600,6 @@ enum {#define VIDEO_DIP_ENABLE_GMP_HSW (1 << 4)#define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0)Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
drivers/gpu/drm/i915/i915_reg.h enum { · line 4602
Quoted 9 lines
drivers/gpu/drm/i915/i915_reg.h +0
-9-#define DRM_DIP_ENABLE (1 << 28) -#define PSR_VSC_BIT_7_SET (1 << 27) -#define VSC_SELECT_MASK (0x3 << 26) -#define VSC_SELECT_SHIFT 26 -#define VSC_DIP_HW_HEA_DATA (0 << 26) -#define VSC_DIP_HW_HEA_SW_DATA (1 << 26) -#define VSC_DIP_HW_DATA_SW_HEA (2 << 26) -#define VSC_DIP_SW_HEA_DATA (3 << 26) -#define VDIP_ENABLE_PPS (1 << 24)Why do you need to remove all of these defs?
From the spec, the only shift thats wrong is :VSC_SELECT_MASK(0x3<< 26)#define VSC_SELECT_SHIFT 26 #define VSC_DIP_HW_HEA_DATA (0 << 26) define VSC_DIP_HW_HEA_SW_DATA (1 << 26) define VSC_DIP_HW_DATA_SW_HEA (2 << 26)
VSC_DIP_SW_HEA_DATA(3 << 26)
Quoted 6 lines
Quoted 1 line
Removing others and redefining to be the same is misleading
Please see other definitions in the file and the documentation above, we generally organize bit definitions in the descending order of their position.
I still dont see why you had remove earlier defs and redefine since
it was already organized in descending order of their position in the originl patches starting with DRM_DIP_ENABLE with 1<< 28 all the way to VDIP_ENABLE_PPS with 1 << 24 and your changes keeps the same order with the fix of VSC HSIFT from 26 to 25. So only those VSC defs should be changed not the entire set.
Manasi
Quoted 16 lines
Quoted 16 lines
Other than that the actual fixes look good, double checked with the spec.
So after the above fix and the commit message fixReviewed-by Manasi Navare <[email protected]>Manasi
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
drivers/gpu/drm/i915/i915_reg.h +0
-0/* Panel power sequencing */ #define PPS_BASE 0x61200Signature · 1 line
2.14.1
Quoted 5 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 103 lines · Manasi Navare
Quoted 15 lines · Dhinakaran Pandiyan
Quoted 14 lines · Manasi Navare
Quoted 11 lines · Dhinakaran Pandiyan
Quoted 10 lines · Manasi Navare
Quoted 8 lines · Dhinakaran Pandiyan
Quoted 7 lines · Lucas De Marchi
Quoted 4 lines · Dhinakaran Pandiyan
The shifts for
VSC_SELECTbits are wrong, fix it. Good thing is
the
definitions are unused.Quoted 7 lines
Quoted 4 lines
No need to mention that defs are unused in the commit since that will
not make sense
once the patches get merged that start using these.Well, the patch is based on the current state of the code base.
Well IMHO that statement is still redundant and more expressive than informative.
Mentioning that this is
a fix for VSC SELECT should suffice. But thats a nitcpick, so its your call.Quoted 73 lines
Quoted 73 lines
More comments below
Quoted 70 lines
Quoted 13 lines
Quoted 8 lines
Quoted 5 lines
If they are unused why are we fixing them instead of removing? Or
better,
why did we add them?I guess there are plans to make use of them, no idea.
Yes, the
VDIP_RNABLE_PPSand DIP enables get used in the DSC patch
series:Quoted 7 lines
https://patchwork.freedesktop.org/series/47514/
If you want I can combine this fixes patch with the new revision
of
DSC patchseries
I am about to send outThat might create an unnecessary dependency on the series getting
merged. We'll have to program these bits for PSR2 from the looks of
it.
Let's get this into the tree soon, can you please review the fix?-DK
Quoted 39 lines
Manasi
Quoted 36 lines
Cc Anusha, ManasiQuoted 34 lines
Lucas De Marchi
Quoted 31 lines
Cc Manasi Navare <[email protected]>Cc Anusha Srivatsa <[email protected]>Cc Rodrigo Vivi <[email protected]>Fixes 7af2be6d54d4 ("drm/i915/icl: Add VIDEO_DIPregisters")
Signed-off-by: Dhinakaran Pandiyan < [email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 18 +++++++++------ --- 1 file changed, 9 insertions(+), 9 deletions(-)drivers/gpu/drm/i915/i915_reg.h +8
-0@@ -4584,6 +4584,15 @@ enum {#define VIDEO_DIP_FREQ_2VSYNC (2 << 16)#define VIDEO_DIP_FREQ_MASK (3 << 16)/* HSW and later: */ +#define DRM_DIP_ENABLE (1 << 28) +#define PSR_VSC_BIT_7_SET (1 << 27) +#define VSC_SELECT_MASK (0x3 << 25) +#define VSC_SELECT_SHIFT 25 +#define VSC_DIP_HW_HEA_DATA (0 << 25) +#define VSC_DIP_HW_HEA_SW_DATA (1 << 25) +#define VSC_DIP_HW_DATA_SW_HEA (2 << 25) +#define VSC_DIP_SW_HEA_DATA (3 << 25)
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/gpu/drm/i915/i915_reg.h enum { · line 4602
Quoted 8 lines
drivers/gpu/drm/i915/i915_reg.h +1
-0+#define VDIP_ENABLE_PPS (1 << 24)#define VIDEO_DIP_ENABLE_VSC_HSW (1 << 20)#define VIDEO_DIP_ENABLE_GCP_HSW (1 << 16)#define
VIDEO_DIP_ENABLE_AVI_HSW(1 << 12)drivers/gpu/drm/i915/i915_reg.h +0
-0@@ -4591,15 +4600,6 @@ enum {#define VIDEO_DIP_ENABLE_GMP_HSW (1 << 4)#define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0)
->
Quoted 31 lines
Quoted 22 lines
Quoted 22 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
drivers/gpu/drm/i915/i915_reg.h +0
-3-#define DRM_DIP_ENABLE (1 << 28) -#define PSR_VSC_BIT_7_SET (1 << 27) -#define VSC_SELECT_MASK (0x3 << 26)Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/gpu/drm/i915/i915_reg.h enum { · line 4605
Quoted 8 lines
drivers/gpu/drm/i915/i915_reg.h +0
-6-#define VSC_SELECT_SHIFT 26 -#define VSC_DIP_HW_HEA_DATA (0 << 26) -#define VSC_DIP_HW_HEA_SW_DATA (1 << 26) -#define VSC_DIP_HW_DATA_SW_HEA (2 << 26) -#define VSC_DIP_SW_HEA_DATA (3 << 26) -#define VDIP_ENABLE_PPS (1 << 24)Why do you need to remove all of these defs?
From the spec, the only shift thats wrong is :VSC_SELECT_MASK(0x3<< 26)#define VSC_SELECT_SHIFT 26 #define VSC_DIP_HW_HEA_DATA (0 << 26) define VSC_DIP_HW_HEA_SW_DATA (1 << 26) define VSC_DIP_HW_DATA_SW_HEA (2 << 26)
VSC_DIP_SW_HEA_DATA(3 << 26)Quoted 8 lines
Quoted 1 line
Removing others and redefining to be the same is misleading
Please see other definitions in the file and the documentation above,
we generally organize bit definitions in the descending order of their
position.
Quoted 8 lines
I still dont see why you had remove earlier defs and redefine since it was already organized in descending order of their position in the originl
patches starting withDRM_DIP_ENABLEwith 1<< 28 all the way toVDIP_ENABLE_PPSwith
1 << 24 and your changes keeps the same order with the fix of VSC HSIFT from 26 to 25.
So only those VSC defs should be changed not the entire set.
It was defined below (1 << 0)
Quoted 24 lines
Manasi
Quoted 21 lines
Quoted 21 lines
Other than that the actual fixes look good, double checked with the
spec.
So after the above fix and the commit message fixReviewed-by Manasi Navare <[email protected]>Manasi
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
/* Panel power sequencing */
#definePPS_BASE0x61200Signature · 5 lines
2.14.1 _______________________________________________ Intel-gfx mailing list [email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerQuoted 6 lines · Lucas De Marchi
Quoted 2 lines · Dhinakaran Pandiyan
The shifts for
VSC_SELECTbits are wrong, fix it. Good thing is the definitions are unused.If they are unused why are we fixing them instead of removing? Or better, why did we add them?
Sorry, my bad... I assumed Manasi's work depending on this would land sooner. But this should actually be part of Manasi's series instead of merging.
Manasi is still working on that. So let's fix. Maybe it was a good thing having in the tree... got more attention and fix than during reviews ;) /me runs
Quoted 52 lines
Lucas De Marchi
Quoted 49 lines
Cc Manasi Navare <[email protected]>Cc Anusha Srivatsa <[email protected]>Cc Rodrigo Vivi <[email protected]>Fixes 7af2be6d54d4 ("drm/i915/icl: Add VIDEO_DIP registers")Signed-off-by Dhinakaran Pandiyan <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)drivers/gpu/drm/i915/i915_reg.h +9
-9@@ -4584,6 +4584,15 @@ enum {#define VIDEO_DIP_FREQ_2VSYNC (2 << 16)#define VIDEO_DIP_FREQ_MASK (3 << 16)/* HSW and later: */ +#define DRM_DIP_ENABLE (1 << 28) +#define PSR_VSC_BIT_7_SET (1 << 27) +#define VSC_SELECT_MASK (0x3 << 25) +#define VSC_SELECT_SHIFT 25 +#define VSC_DIP_HW_HEA_DATA (0 << 25) +#define VSC_DIP_HW_HEA_SW_DATA (1 << 25) +#define VSC_DIP_HW_DATA_SW_HEA (2 << 25) +#define VSC_DIP_SW_HEA_DATA (3 << 25) +#define VDIP_ENABLE_PPS (1 << 24)#define VIDEO_DIP_ENABLE_VSC_HSW (1 << 20)#define VIDEO_DIP_ENABLE_GCP_HSW (1 << 16)#define VIDEO_DIP_ENABLE_AVI_HSW (1 << 12)@@ -4591,15 +4600,6 @@ enum {#define VIDEO_DIP_ENABLE_GMP_HSW (1 << 4)#define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0) -#define DRM_DIP_ENABLE (1 << 28) -#define PSR_VSC_BIT_7_SET (1 << 27) -#define VSC_SELECT_MASK (0x3 << 26) -#define VSC_SELECT_SHIFT 26 -#define VSC_DIP_HW_HEA_DATA (0 << 26) -#define VSC_DIP_HW_HEA_SW_DATA (1 << 26) -#define VSC_DIP_HW_DATA_SW_HEA (2 << 26) -#define VSC_DIP_SW_HEA_DATA (3 << 26) -#define VDIP_ENABLE_PPS (1 << 24)/* Panel power sequencing */ #define PPS_BASE 0x61200Signature · 1 line
2.14.1
Quoted 4 lines
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for drm/i915: Fix VIDEO_DIP_CTL bit shifts
In reply to Dhinakaran Pandiyan== Series Details ==
== Series Details ==
Series: drm/i915: Fix VIDEO_DIP_CTL bit shifts
URL : https://patchwork.freedesktop.org/series/50573/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4932_full -> Patchwork_10365_full =
== Summary - WARNING ==
Minor unknown changes coming with Patchwork_10365_full need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_10365_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_10365_full:
=== IGT changes ===
==== Warnings ====
igt@pm_rc6_residency@rc6-accuracy:
shard-snb: SKIP -> PASS== Known issues ==
Here are the changes found in Patchwork_10365_full that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@gem_exec_schedule@pi-ringfull-bsd:
shard-skl: NOTRUN -> FAIL (fdo#103158)
igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-a:
shard-skl: NOTRUN -> DMESG-WARN (fdo#107956) +3
igt@kms_busy@extended-modeset-hang-oldfb-with-reset-render-b:
shard-apl: PASS -> DMESG-WARN (fdo#103558, fdo#105602) +1
igt@kms_cursor_crc@cursor-128x128-random:
shard-glk: PASS -> FAIL (fdo#103232)
igt@kms_cursor_crc@cursor-128x42-random:
shard-apl: PASS -> FAIL (fdo#103232) +1
igt@kms_cursor_crc@cursor-64x64-suspend:
shard-apl: PASS -> FAIL (fdo#103191, fdo#103232) +1
shard-kbl: PASS -> FAIL (fdo#103191, fdo#103232)
igt@kms_fbcon_fbt@psr:
shard-skl: NOTRUN -> FAIL (fdo#107882)
igt@kms_flip@flip-vs-expired-vblank:
shard-skl: PASS -> FAIL (fdo#105363)
igt@kms_flip@plain-flip-fb-recreate:
shard-skl: NOTRUN -> FAIL (fdo#100368)
igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-indfb-draw-mmap-wc:
shard-skl: PASS -> FAIL (fdo#105682)
igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-fullscreen:
shard-apl: PASS -> FAIL (fdo#103167) +1
igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-move:
shard-glk: PASS -> FAIL (fdo#103167) +1
igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-cur-indfb-move:
shard-skl: PASS -> FAIL (fdo#103167)
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
shard-apl: PASS -> INCOMPLETE (fdo#103927)
{igt@kms_plane_alpha_blend@pipe-a-alpha-opaque-fb}:
shard-apl: PASS -> FAIL (fdo#108145)
shard-skl: NOTRUN -> FAIL (fdo#108145) +3
{igt@kms_plane_alpha_blend@pipe-a-coverage-7efc}:
shard-skl: PASS -> FAIL (fdo#108145)
{igt@kms_plane_alpha_blend@pipe-c-alpha-7efc}:
shard-skl: NOTRUN -> FAIL (fdo#108146)
{igt@kms_plane_alpha_blend@pipe-c-alpha-opaque-fb}:
shard-glk: PASS -> FAIL (fdo#108145)
igt@kms_plane_multiple@atomic-pipe-b-tiling-y:
shard-glk: PASS -> FAIL (fdo#103166) +1
igt@kms_plane_multiple@atomic-pipe-b-tiling-yf:
shard-apl: PASS -> FAIL (fdo#103166) +1
igt@kms_setmode@basic:
shard-apl: PASS -> FAIL (fdo#99912)
shard-hsw: PASS -> FAIL (fdo#99912)
igt@kms_vblank@pipe-c-wait-busy:
shard-kbl: PASS -> DMESG-WARN (fdo#103558, fdo#105602) +10
igt@pm_rpm@cursor-dpms:
shard-skl: PASS -> INCOMPLETE (fdo#107807) +1
==== Possible fixes ====
igt@drv_suspend@fence-restore-untiled:
shard-kbl: INCOMPLETE (fdo#103665) -> PASS
igt@gem_cpu_reloc@full:
shard-skl: INCOMPLETE (fdo#108073) -> PASS
igt@gem_userptr_blits@readonly-unsync:
shard-skl: INCOMPLETE (fdo#108074) -> PASS
igt@kms_color@pipe-a-ctm-max:
shard-apl: FAIL (fdo#108147) -> PASS
igt@kms_cursor_crc@cursor-64x21-sliding:
shard-apl: FAIL (fdo#103232) -> PASS +2
igt@kms_cursor_legacy@cursora-vs-flipa-toggle:
shard-glk: DMESG-WARN (fdo#106538, fdo#105763) -> PASS
igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-mmap-gtt:
shard-apl: FAIL (fdo#103167) -> PASS +1
igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-fullscreen:
shard-glk: FAIL (fdo#103167) -> PASS +1
igt@kms_plane@plane-position-covered-pipe-b-planes:
shard-glk: FAIL (fdo#103166) -> PASS
igt@kms_plane_multiple@atomic-pipe-b-tiling-y:
shard-apl: FAIL (fdo#103166) -> PASS +1
igt@kms_setmode@basic:
shard-kbl: FAIL (fdo#99912) -> PASS
igt@pm_rpm@modeset-lpsp-stress-no-wait:
shard-skl: INCOMPLETE (fdo#107807) -> PASS {name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103158 https://bugs.freedesktop.org/show_bug.cgi?id=103158
fdo#103166 https://bugs.freedesktop.org/show_bug.cgi?id=103166
fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fdo#103232 https://bugs.freedesktop.org/show_bug.cgi?id=103232
fdo#103558 https://bugs.freedesktop.org/show_bug.cgi?id=103558
fdo#103665 https://bugs.freedesktop.org/show_bug.cgi?id=103665
fdo#103927 https://bugs.freedesktop.org/show_bug.cgi?id=103927
fdo#105363 https://bugs.freedesktop.org/show_bug.cgi?id=105363
fdo#105602 https://bugs.freedesktop.org/show_bug.cgi?id=105602
fdo#105682 https://bugs.freedesktop.org/show_bug.cgi?id=105682
fdo#105763 https://bugs.freedesktop.org/show_bug.cgi?id=105763
fdo#106538 https://bugs.freedesktop.org/show_bug.cgi?id=106538
fdo#107807 https://bugs.freedesktop.org/show_bug.cgi?id=107807
fdo#107882 https://bugs.freedesktop.org/show_bug.cgi?id=107882
fdo#107956 https://bugs.freedesktop.org/show_bug.cgi?id=107956
fdo#108073 https://bugs.freedesktop.org/show_bug.cgi?id=108073
fdo#108074 https://bugs.freedesktop.org/show_bug.cgi?id=108074
fdo#108145 https://bugs.freedesktop.org/show_bug.cgi?id=108145
fdo#108146 https://bugs.freedesktop.org/show_bug.cgi?id=108146
fdo#108147 https://bugs.freedesktop.org/show_bug.cgi?id=108147
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
== Participating hosts (6 -> 6) ==
No changes in participating hosts
== Build changes ==
* Linux: CI_DRM_4932 -> Patchwork_10365
CI_DRM_4932: 21f90148bf7adb33d82580013a5697a6bbb88248 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4669: 5f40e617cd9c1e089f4a2d79c53a417d891e3e3c @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10365: dabd694408ac19e4f366640c15665211e4de0e53 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10365/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx