Miscellaneous build and docs, fixes from Debian

Bastian Blank (1):
tools/xenstat: Fix shared library version

Ian Jackson (17):
docs/man: Fix two typos detected by the Debian lintian tool tools/xentrace/xenalyze: Fix typos detected by lintian
Various: Fix typos unkown', retreive' (detected by lintian)
Various: Fix typo `occured'
Various: Fix typo reseting' tools/python/xen/lowlevel: Fix typo sucess'
Various: Fix typo `infomation'
Various: Fix typo `mappping'
tools/Rules.mk: Honour PREPEND_LDFLAGS_XEN_TOOLS
INSTALL: Mention kconfig
docs/man: Provide properly-formatted NAME sections docs/man/xen-pv-channel.pod.7: Remove a spurious blank line
gdbsx: Honour LDFLAGS when linking
libfsimage: Honour general LDFLAGS
pygrub fsimage.so: Honour LDFLAGS when building
xenmon: Install as xenmon, not xenmon.py tools/debugger/kdd: Install as xen-kdd', not just kdd'

 INSTALL                                    | 20 ++++++++++++++++++++
 docs/man/xen-pci-device-reservations.pod.7 |  4 ++++
 docs/man/xen-pv-channel.pod.7              |  3 +--
 docs/man/xen-tscmode.pod.7                 |  4 ++++
 docs/man/xen-vtpm.pod.7                    |  6 ++++++
 docs/man/xen-vtpmmgr.pod.7                 |  4 ++++
 docs/man/xenstore.pod.1                    |  2 +-
 docs/man/xl-numa-placement.pod.7           |  2 +-
 docs/man/xl.pod.1.in                       |  2 +-
 tools/Rules.mk                             |  2 ++
 tools/debugger/gdbsx/Makefile              |  2 +-
 tools/debugger/kdd/Makefile                |  4 ++--
 tools/hotplug/Linux/block-drbd-probe       |  2 +-
 tools/libfsimage/common/Makefile           |  2 +-
 tools/libxc/xc_dom_elfloader.c             |  2 +-
 tools/libxl/libxl_dm.c                     |  2 +-
 tools/libxl/libxl_event.h                  |  2 +-
 tools/libxl/libxl_internal.h               |  2 +-
 tools/libxl/libxl_qmp.c                    |  2 +-
 tools/misc/xenlockprof.c                   |  2 +-
 tools/misc/xenperf.c                       |  2 +-
 tools/pygrub/Makefile                      |  2 +-
 tools/python/xen/lowlevel/xc/xc.c          |  6 +++---
 tools/xenmon/Makefile                      |  4 ++--
 tools/xenstat/libxenstat/Makefile          |  2 +-
 tools/xenstat/libxenstat/src/xenstat_qmp.c |  2 +-
 tools/xentrace/xenalyze.c                  |  8 ++++----
 tools/xl/xl_flask.c                        |  2 +-
 xen/arch/arm/arm64/lib/memcmp.S            |  2 +-
 xen/arch/x86/hvm/hvm.c                     |  2 +-
 xen/arch/x86/hvm/svm/intr.c                |  2 +-
 xen/common/sched_rt.c                      |  2 +-
 xen/drivers/acpi/apei/erst.c               |  2 +-
 xen/drivers/passthrough/arm/smmu.c         |  2 +-
 xen/drivers/passthrough/vtd/iommu.h        |  2 +-
 xen/include/efi/efiprot.h                  |  2 +-
 xen/include/public/domctl.h                |  2 +-
 xen/include/public/xen.h                   |  2 +-
 xen/include/xen/libfdt/libfdt.h            |  2 +-
 xen/include/xen/sched.h                    |  2 +-
 40 files changed, 81 insertions(+), 42 deletions(-)

2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

---
 docs/man/xenstore.pod.1 | 2 +-
 docs/man/xl.pod.1.in    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

index 74172891e2..dd8f80647d 100644
@@ -18,7 +18,7 @@ Sets the permissions of keys.
 
 =item B<xenstore-exists>(1)
 
-Test for the existance of a key.
+Test for the existence of a key.
 
 =item B<xenstore-list>(1)
 

index b74764dcd3..18006880d6 100644
@@ -1398,7 +1398,7 @@ Creates a new network device in the domain specified by I<domain-id>.
 I<network-device> describes the device to attach, using the same format as the
 B<vif> string in the domain config file. See L<xl.cfg(5)> and
 L<xl-network-configuration(5)>
-for more informations.
+for more information.
 
 Note that only attaching PV network interfaces is supported.
 

2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

---
 tools/xentrace/xenalyze.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

index 5ed0a12327..aa894673ad 100644
@@ -9224,7 +9224,7 @@ void process_cpu_change(struct pcpu_info *p) {
 
     /* File sanity check */
     if(p->file_offset != p->next_cpu_change_offset) {
-        fprintf(warn, "Strange, pcpu %d expected offet %llx, actual %llx!\n",
+        fprintf(warn, "Strange, pcpu %d expected offset %llx, actual %llx!\n",
                 p->pid, (unsigned long long)p->next_cpu_change_offset,
                 (unsigned long long)p->file_offset);
     }

@@ -9673,7 +9673,7 @@ ssize_t read_record(struct pcpu_info * p) {
 }
 
 /*
- * This funciton gets called for every record when doing dump.  Try to
+ * This function gets called for every record when doing dump.  Try to
  * make it efficient by changing the minimum amount from the last
  * call.  Do this by:
  * - Keeping track of the last pcpu called, so we can just set that to -

@@ -10629,7 +10629,7 @@ const struct argp_option cmd_opts[] =  {
       .key = OPT_SCATTERPLOT_EXTINT_CYCLES,
       .arg = "vector",
       .group = OPT_GROUP_EXTRA,
-      .doc = "Output a scatterplot of vmexit cycles for external interrupts of the given vector as a funciton of time.", },
+      .doc = "Output a scatterplot of vmexit cycles for external interrupts of the given vector as a function of time.", },
 
     { .name = "scatterplot-unpin-promote",
       .key = OPT_SCATTERPLOT_UNPIN_PROMOTE,

@@ -10756,7 +10756,7 @@ const struct argp_option cmd_opts[] =  {
       .key = OPT_MMIO_ENUMERATION_SKIP_VGA,
       .arg = "[0|1]",
       .group = OPT_GROUP_SUMMARY,
-      .doc = "Control whether we enumerate MMIO accesses to the VGA area, which can be extremly high during boot.  Default: 0", },
+      .doc = "Control whether we enumerate MMIO accesses to the VGA area, which can be extremely high during boot.  Default: 0", },
 
     { .name = "sample-size",
       .key = OPT_SAMPLE_SIZE,

2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

---
 tools/hotplug/Linux/block-drbd-probe | 2 +-
 tools/libxc/xc_dom_elfloader.c       | 2 +-
 tools/libxl/libxl_dm.c               | 2 +-
 tools/libxl/libxl_event.h            | 2 +-
 tools/libxl/libxl_qmp.c              | 2 +-
 xen/include/xen/libfdt/libfdt.h      | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

index 635d9f9a52..7b2968b6d9 100755
@@ -20,7 +20,7 @@
 # Return value:
 #     0: the device is drbd device
 #     1: the device is not drbd device
-#     2: unkown error
+#     2: unknown error
 #     3: the drbd device does not use protocol D
 #     4: the drbd device is not ready
 

index 26b2846365..82b5f2ee79 100644
@@ -87,7 +87,7 @@ static char *xc_dom_guest_type(struct xc_dom_image *dom,
         return "xen-3.0-x86_64";
     default:
         xc_dom_panic(dom->xch, XC_INVALID_KERNEL,
-                     "%s: unkown image type %"PRIu64,
+                     "%s: unknown image type %"PRIu64,
                      __FUNCTION__, machine);
         return NULL;
     }

index abd31ee6f2..26eb16af34 100644
@@ -992,7 +992,7 @@ static int libxl__build_device_model_args_new(libxl__gc *gc,
 
     /*
      * Do not use any of the user-provided config files in sysconfdir,
-     * avoiding unkown and uncontrolled configuration.
+     * avoiding unknown and uncontrolled configuration.
      */
     flexarray_append(dm_args, "-no-user-config");
 

index 1ea789e231..d1517f7456 100644
@@ -169,7 +169,7 @@ void libxl_event_register_callbacks(libxl_ctx *ctx,
  *
  * Applications should ensure that they eventually retrieve every
  * event using libxl_event_check or libxl_event_wait, since events
- * which occur but are not retreived by the application will be queued
+ * which occur but are not retrieved by the application will be queued
  * inside libxl indefinitely.  libxl_event_check/_wait may be O(n)
  * where n is the number of queued events which do not match the
  * criteria specified in the arguments to check/wait.

index bdf1778cf1..6a5c997546 100644
@@ -238,7 +238,7 @@ static int qmp_register_vnc_callback(libxl__qmp_handler *qmp,
     port = libxl__json_object_get_string(obj);
 
     if (!addr || !port) {
-        LOGD(ERROR, qmp->domid, "Failed to retreive VNC connect information.");
+        LOGD(ERROR, qmp->domid, "Failed to retrieve VNC connect information.");
         goto out;
     }
 

index d6b94a1836..7c75688a39 100644
@@ -594,7 +594,7 @@ const char *fdt_get_alias_namelen(const void *fdt,
 				  const char *name, int namelen);
 
 /**
- * fdt_get_alias - retreive the path referenced by a given alias
+ * fdt_get_alias - retrieve the path referenced by a given alias
  * @fdt: pointer to the device tree blob
  * @name: name of the alias th look up
  *

2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

---
 tools/xl/xl_flask.c                | 2 +-
 xen/arch/arm/arm64/lib/memcmp.S    | 2 +-
 xen/arch/x86/hvm/hvm.c             | 2 +-
 xen/arch/x86/hvm/svm/intr.c        | 2 +-
 xen/drivers/passthrough/arm/smmu.c | 2 +-
 xen/include/efi/efiprot.h          | 2 +-
 xen/include/public/xen.h           | 2 +-
 xen/include/xen/sched.h            | 2 +-
 8 files changed, 8 insertions(+), 8 deletions(-)

index 523769750b..6b11f091cc 100644
@@ -75,7 +75,7 @@ int main_setenforce(int argc, char **argv)
             fprintf(stderr, "Flask XSM disabled\n");
         }
         else
-            fprintf(stderr, "error occured while setting enforcing mode (%i)\n", ret);
+            fprintf(stderr, "error occurred while setting enforcing mode (%i)\n", ret);
     }
 
     return ret;

index 2eb81565ef..87c2537ffe 100644
@@ -210,7 +210,7 @@ CPU_LE( lsr	tmp2, tmp2, tmp1 )
 .Lunequal_proc:
 	cbz	diff, .Lremain8
 
-/*There is differnence occured in the latest comparison.*/
+/*There is differnence occurred in the latest comparison.*/
 .Lnot_limit:
 /*
 * For little endian,reverse the low significant equal bits into MSB,then

index fa994a36a4..6c1301df42 100644
@@ -1696,7 +1696,7 @@ int hvm_hap_nested_page_fault(paddr_t gpa, unsigned long gla,
         case NESTEDHVM_PAGEFAULT_RETRY:
             return 1;
         case NESTEDHVM_PAGEFAULT_L1_ERROR:
-            /* An error occured while translating gpa from
+            /* An error occurred while translating gpa from
              * l2 guest address to l1 guest address. */
             return 0;
         case NESTEDHVM_PAGEFAULT_INJECT:

index ed5b100790..79673535d1 100644
@@ -159,7 +159,7 @@ void svm_intr_assist(void)
             int rc;
 
             /* l2 guest was running when an interrupt for
-             * the l1 guest occured.
+             * the l1 guest occurred.
              */
             rc = nestedsvm_vcpu_interrupt(v, intack);
             switch (rc) {

index 53e5823d05..b51039943c 100644
@@ -2278,7 +2278,7 @@ MODULE_DEVICE_TABLE(of, arm_smmu_of_match);
 
 /*
  * Xen: We don't have refcount for allocated memory so manually free memory
- * when an error occured.
+ * when an error occurred.
  */
 static int arm_smmu_device_dt_probe(struct platform_device *pdev)
 {

index 05d3afb8d9..8cf04df437 100644
@@ -691,7 +691,7 @@ typedef enum {
 
   @retval EFI_SUCCESS           The Blt operation completed.
   @retval EFI_INVALID_PARAMETER BltOperation is not valid.
-  @retval EFI_DEVICE_ERROR      A hardware error occured writting to the video buffer.
+  @retval EFI_DEVICE_ERROR      A hardware error occurred writting to the video buffer.
 
 **/
 typedef

index fb1df8f293..68ee09810f 100644
@@ -177,7 +177,7 @@ DEFINE_XEN_GUEST_HANDLE(xen_ulong_t);
 #define VIRQ_XENOPROF   7  /* V. XenOprofile interrupt: new sample available */
 #define VIRQ_CON_RING   8  /* G. (DOM0) Bytes received on console            */
 #define VIRQ_PCPU_STATE 9  /* G. (DOM0) PCPU state changed                   */
-#define VIRQ_MEM_EVENT  10 /* G. (DOM0) A memory event has occured           */
+#define VIRQ_MEM_EVENT  10 /* G. (DOM0) A memory event has occurred          */
 #define VIRQ_XC_RESERVED 11 /* G. Reserved for XenClient                     */
 #define VIRQ_ENOMEM     12 /* G. (DOM0) Low on heap memory       */
 #define VIRQ_XENPMU     13 /* V.  PMC interrupt                              */

index a2334ddeff..c5540fa32f 100644
@@ -615,7 +615,7 @@ void __domain_crash(struct domain *d);
 
 /*
  * Called from assembly code, with an optional address to help indicate why
- * the crash occured.  If addr is 0, look up address from last extable
+ * the crash occurred.  If addr is 0, look up address from last extable
  * redirection.
  */
 void noreturn asm_domain_crash_synchronous(unsigned long addr);

2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

---
 tools/misc/xenlockprof.c | 2 +-
 tools/misc/xenperf.c     | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

index df23c82912..11f43a35e3 100644
@@ -46,7 +46,7 @@ int main(int argc, char *argv[])
     {
         if ( xc_lockprof_reset(xc_handle) != 0 )
         {
-            fprintf(stderr, "Error reseting profile data: %d (%s)\n",
+            fprintf(stderr, "Error resetting profile data: %d (%s)\n",
                     errno, strerror(errno));
             return 1;
         }

index 07e584a5eb..a5fbdaa45f 100644
@@ -123,7 +123,7 @@ int main(int argc, char *argv[])
     {
         if ( xc_perfc_reset(xc_handle) != 0 )
         {
-            fprintf(stderr, "Error reseting performance counters: %d (%s)\n",
+            fprintf(stderr, "Error resetting performance counters: %d (%s)\n",
                     errno, strerror(errno));
             return 1;
         }

2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

---
 tools/python/xen/lowlevel/xc/xc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index b137d5a839..6f5b8a6fa8 100644
@@ -2178,7 +2178,7 @@ static PyMethodDef pyxc_methods[] = {
       " xenstore_gmfn [int]: \n"
       " console_domid [int]: \n"
       " xenstore_domid [int]: \n"
-      "Returns: None on sucess. Raises exception on error.\n" },
+      "Returns: None on success. Raises exception on error.\n" },
 
     { "hvm_get_param", 
       (PyCFunction)pyxc_hvm_param_get,

2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

---
 tools/libxl/libxl_internal.h               | 2 +-
 tools/python/xen/lowlevel/xc/xc.c          | 2 +-
 tools/xenstat/libxenstat/src/xenstat_qmp.c | 2 +-
 xen/common/sched_rt.c                      | 2 +-
 xen/drivers/acpi/apei/erst.c               | 2 +-
 xen/include/public/domctl.h                | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

index 802382c704..43947b1b07 100644
@@ -2604,7 +2604,7 @@ struct libxl__multidev {
  * Once finished, aodev->callback will be executed.
  */
 /*
- * As of Xen 4.5 we maintain various infomation, including hotplug
+ * As of Xen 4.5 we maintain various information, including hotplug
  * device information, in JSON files, so that we can use this JSON
  * file as a template to reconstruct domain configuration.
  *

index 6f5b8a6fa8..ebef92cd50 100644
@@ -2200,7 +2200,7 @@ static PyMethodDef pyxc_methods[] = {
     { "get_device_group",
       (PyCFunction)pyxc_get_device_group,
       METH_VARARGS, "\n"
-      "get sibling devices infomation.\n"
+      "get sibling devices information.\n"
       " dom     [int]:      Domain to assign device to.\n"
       " seg     [int]:      PCI segment.\n"
       " bus     [int]:      PCI bus.\n"

index 3fda487d49..19b236e7b6 100644
@@ -59,7 +59,7 @@ enum query_block {
 
 
 /* Given the qmp device name, get the image filename associated with it
-   QMP Syntax for querying block infomation:
+   QMP Syntax for querying block information:
      In: { "execute": "query-block" }
      Out: {"return": [{
             "device": 'str, "locked": 'bool', "removable": bool,

index ac79f15dc3..59fbfa625f 100644
@@ -203,7 +203,7 @@ struct rt_vcpu {
     s_time_t period;
     s_time_t budget;
 
-    /* VCPU current infomation in nanosecond */
+    /* VCPU current information in nanosecond */
     s_time_t cur_budget;         /* current budget */
     s_time_t last_start;         /* last start time */
     s_time_t cur_deadline;       /* current deadline for EDF */

index 7fc4de5de9..3a2e403173 100644
@@ -2,7 +2,7 @@
  * APEI Error Record Serialization Table support
  *
  * ERST is a way provided by APEI to save and retrieve hardware error
- * infomation to and from a persistent store.
+ * information to and from a persistent store.
  *
  * For more information about ERST, please refer to ACPI Specification
  * version 4.0, section 17.4.

index 82b696798c..1bbdcd9f8a 100644
@@ -508,7 +508,7 @@ struct xen_domctl_assign_device {
     } u;
 };
 
-/* Retrieve sibling devices infomation of machine_sbdf */
+/* Retrieve sibling devices information of machine_sbdf */
 /* XEN_DOMCTL_get_device_group */
 struct xen_domctl_get_device_group {
     uint32_t  machine_sbdf;     /* IN */

2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

Funny how often the same spelling mistakes repeat...

Jan

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

Jan Beulich writes ("Re: [PATCH 07/18] Various: Fix typo `infomation'"):

Mmm.

In one of my own projects I had a persistent problem with pseudo' (which appeared in some textual protocol elements, so the spelling was important). I eventually wrote a test case which fails iff the source code contains ps[u]edo' (written that way to avoid tripping itself).

Ian.

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

---
 tools/python/xen/lowlevel/xc/xc.c   | 2 +-
 xen/drivers/passthrough/vtd/iommu.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

index ebef92cd50..484b790c75 100644
@@ -2385,7 +2385,7 @@ static PyMethodDef pyxc_methods[] = {
     { "domain_set_memmap_limit", 
       (PyCFunction)pyxc_domain_set_memmap_limit, 
       METH_VARARGS, "\n"
-      "Set a domain's physical memory mappping limit\n"
+      "Set a domain's physical memory mapping limit\n"
       " dom [int]: Identifier of domain.\n"
       " map_limitkb [int]: .\n"
       "Returns: [int] 0 on success; -1 on error.\n" },

index 47bdfcb5ea..1a992f72d6 100644
@@ -513,7 +513,7 @@ struct qi_ctrl {
 struct ir_ctrl {
     u64 iremap_maddr;            /* interrupt remap table machine address */
     int iremap_num;              /* total num of used interrupt remap entry */
-    spinlock_t iremap_lock;      /* lock for irq remappping table */
+    spinlock_t iremap_lock;      /* lock for irq remapping table */
 };
 
 struct iommu_flush {

2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

This allows the caller to provide some LDFLAGS to the Xen build system.

---
 tools/Rules.mk | 2 ++
 1 file changed, 2 insertions(+)

index 296b722372..68f2ed7ce1 100644
@@ -9,6 +9,8 @@ include $(XEN_ROOT)/Config.mk
 export _INSTALL := $(INSTALL)
 INSTALL = $(XEN_ROOT)/tools/cross-install
 
+LDFLAGS += $(PREPEND_LDFLAGS_XEN_TOOLS)
+
 XEN_INCLUDE        = $(XEN_ROOT)/tools/include
 XEN_LIBXENTOOLCORE  = $(XEN_ROOT)/tools/libs/toolcore
 XEN_LIBXENTOOLLOG  = $(XEN_ROOT)/tools/libs/toollog

2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

Firstly, add a reference to the documentation for the kconfig system.

Secondly, warn the user about the XEN_CONFIG_EXPERT problem.

---
 INSTALL | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

index 9aa9ebdddc..62b0162864 100644
@@ -19,6 +19,26 @@ following compile process. Once configure is done, make(1) has to be
 called. Also make(1) recognizes certain arguments. The following sections
 will give an overview.
 
+Xen Hypervisor
+==============
+
+Xen itself is configured via a `kconfig' system borrowed from Linux.
+See docs/misc/kconfig.txt.
+
+Note that unlike with Linux, and contrary to that document, you cannot
+look at Kconfig files, or the default or generated config files etc.,
+to find available configuration options.  This is because it is only
+supported (and security supported) by the Xen Project, to change a
+small subset of the options.  Attempts to change other options will be
+silently overriden.  The only way to find which configuration options
+are available is to run `make menuconfig' or the like.
+
+You can counter-override this behaviour by setting XEN_CONFIG_EXPERT=y
+in your environment.  However, doing this is not supported and the
+resulting configurations do not receive security support.  If you set
+this varible there is nothing stopping you setting dangerously
+experimental combinations of features - not even any warnings.
+
 Options recognized by configure
 ===============================
 

2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

Doug Goldstein writes ("Re: [PATCH 10/18] INSTALL: Mention kconfig"):

Thanks.

It sounds like you are saying that what I write above is not accurate. I didn't intend it to cover any setting of XEN_CONFIG_EXPERT by the Xen build system itself.

I'm not sure how that interacts wit your R-B either. Normally a R-B would imply approval of the contents.

Well, yes. I decided that documenting the situation was the best way to throw light on it and possibly even get it changed.

Thanks,
Ian.

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

Jan Beulich writes ("Re: [PATCH 10/18] INSTALL: Mention kconfig"):

It is; I was wrong.

Fixed.

Thanks, I'll take that as an ack. (Assuming you did indeed mean accepting' rather than excepting'.)

Ian.

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

Well, no, it was not meant as an ack, merely as the absence of further objections. (And yes, I did mean "accepting".)

Jan

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

Jan Beulich writes ("Re: [PATCH 10/18] INSTALL: Mention kconfig"):

Err, OK.

Doug, do you want me to propose a different or expanded wording ?

Ian.

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

No. I think this good. It sheds light on something that was black magic and that's good. I think you've started the conversation on how we see XEN_CONFIG_EXPERT evolving (due to the shim config) and that's great too. +1 from me.

--
Doug

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

A manpage `foo.7.pod' must start with

=head NAME

foo - some summary of what foo is or what this manpage is

because otherwise manpage catalogue systems cannot generate a proper `whatis' entry.

---
 docs/man/xen-pci-device-reservations.pod.7 | 4 ++++
 docs/man/xen-pv-channel.pod.7              | 2 +-
 docs/man/xen-tscmode.pod.7                 | 4 ++++
 docs/man/xen-vtpm.pod.7                    | 6 ++++++
 docs/man/xen-vtpmmgr.pod.7                 | 4 ++++
 docs/man/xl-numa-placement.pod.7           | 2 +-
 6 files changed, 20 insertions(+), 2 deletions(-)

index dac92764fc..049e47410f 100644
@@ -1,3 +1,7 @@
+=head1 NAME
+
+xen-pci-device-reservations - Xen PCI device ID registry
+
 =head1 Description
 
 PCI vendor ID 0x5853 has been reserved for use by Xen systems in order to

index 7229b26d06..f9f0108488 100644
@@ -3,7 +3,7 @@
 
 =head1 NAME
 
-Xen PV Channels
+xen-pv-channel - Xen PV Channels
 
 =head1 DESCRIPTION
 

index 3bbc96f201..819c61dd05 100644
@@ -1,3 +1,7 @@
+=head1 NAME
+
+xen-tscmode - Xen TSC (time stamp counter) and timekeeping discussion
+
 =head1 OVERVIEW
 
 As of Xen 4.0, a new config option called tsc_mode may be specified

index 8de67f4d94..1d8185616a 100644
@@ -1,3 +1,9 @@
+=head1 NAME
+
+xen-vtpm - Xen virtual Trusted Platform Module (vTPM) subsystem
+
+=head1 RUBRIC
+
 Copyright (c) 2010-2012 United States Government, as represented by
 the Secretary of Defense.  All rights reserved.
 November 12 2012

index 2c3a2de8aa..af825a7ffe 100644
@@ -1,3 +1,7 @@
+=head1 NAME
+
+xen-vtpmgr - Xen virtual TPM stubdomain
+
 =head1 Authors
 
 =over 4

index 54a444172e..ae8330207e 100644
@@ -2,7 +2,7 @@
 
 =head1 NAME
 
-Guest Automatic NUMA Placement in libxl and xl
+xl-numa-placement - Guest Automatic NUMA Placement in libxl and xl
 
 =head1 DESCRIPTION
 

2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

No functional change.

---
 docs/man/xen-pv-channel.pod.7 | 1 -
 1 file changed, 1 deletion(-)

index f9f0108488..07898f6dde 100644
@@ -1,6 +1,5 @@
 =encoding utf8
 
-
 =head1 NAME
 
 xen-pv-channel - Xen PV Channels

2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

From: Bastian Blank <[email protected]>

libxenstat does not have a stable ABI. Set its version to the current Xen release version.

---
 tools/xenstat/libxenstat/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 8979fa1583..8c6ddf86e8 100644
@@ -18,7 +18,7 @@ include $(XEN_ROOT)/tools/Rules.mk
 LDCONFIG=ldconfig
 MAKE_LINK=ln -sf
 
-MAJOR=0
+MAJOR=4.11
 MINOR=0
 
 LIB=src/libxenstat.a

2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

This command does the link, so it needs LDFLAGS.

---
 tools/debugger/gdbsx/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 723a2743cc..8d7cd94a31 100644
@@ -26,7 +26,7 @@ uninstall:
 	rm -f $(DESTDIR)$(sbindir)/gdbsx
 
 gdbsx: gx/gx_all.a xg/xg_all.a 
-	$(CC) -o $@ $^
+	$(CC) $(LDFLAGS) -o $@ $^
 
 xg/xg_all.a:
 	$(MAKE) -C xg

2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

Do not reset LDFLAGS to empty. Instead, append the fsimage-special LDFLAGS.

---
 tools/libfsimage/common/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 0791fc9923..a4655c421c 100644
@@ -6,7 +6,7 @@ MINOR = 0
 
 LDFLAGS-$(CONFIG_SunOS) = -Wl,-M -Wl,mapfile-SunOS
 LDFLAGS-$(CONFIG_Linux) = -Wl,mapfile-GNU
-LDFLAGS = $(LDFLAGS-y)
+LDFLAGS += $(LDFLAGS-y)
 
 CFLAGS += $(PTHREAD_CFLAGS)
 LDFLAGS += $(PTHREAD_LDFLAGS)

2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

This seems to have been simply omitted. Obviously this is needed when building and not just when installing. Passing only when installing is ineffective.

---
 tools/pygrub/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 536af07932..3063c4998f 100644
@@ -10,7 +10,7 @@ INSTALL_LOG = build/installed_files.txt
 all: build
 .PHONY: build
 build:
-	CC="$(CC)" CFLAGS="$(PY_CFLAGS)" $(PYTHON) setup.py build
+	CC="$(CC)" CFLAGS="$(PY_CFLAGS)" LDFLAGS="$(PY_LDFLAGS)" $(PYTHON) setup.py build
 
 .PHONY: install
 install: all

2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

Adding the implementation language as a suffix to a program name is poor practice.

---
 tools/xenmon/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index e45c5b8c14..e1712304d0 100644
@@ -32,13 +32,13 @@ install: build
 	$(INSTALL_DIR) $(DESTDIR)$(sbindir)
 	$(INSTALL_PROG) xenbaked $(DESTDIR)$(sbindir)/xenbaked
 	$(INSTALL_PROG) xentrace_setmask  $(DESTDIR)$(sbindir)/xentrace_setmask
-	$(INSTALL_PROG) xenmon.py  $(DESTDIR)$(sbindir)/xenmon.py
+	$(INSTALL_PROG) xenmon.py  $(DESTDIR)$(sbindir)/xenmon
 
 .PHONY: uninstall
 uninstall:
 	rm -f $(DESTDIR)$(sbindir)/xenbaked
 	rm -f $(DESTDIR)$(sbindir)/xentrace_setmask
-	rm -f $(DESTDIR)$(sbindir)/xenmon.py
+	rm -f $(DESTDIR)$(sbindir)/xenmon
 
 .PHONY: clean
 clean:

2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

`kdd' is an unfortunate namespace landgrab.

---
 tools/debugger/kdd/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 5509eee68c..26116949d4 100644
@@ -24,8 +24,8 @@ distclean: clean
 .PHONY: install
 install: all
 	[ -d $(DESTDIR)$(sbindir) ] || $(INSTALL_DIR) $(DESTDIR)$(sbindir)
-	$(INSTALL_PROG) kdd $(DESTDIR)$(sbindir)/kdd
+	$(INSTALL_PROG) kdd $(DESTDIR)$(sbindir)/xen-kdd
 
 .PHONY: uninstall
 uninstall:
-	rm -f $(DESTDIR)$(sbindir)/kdd
+	rm -f $(DESTDIR)$(sbindir)/xen-kdd

2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

Bah, humbug, etc. :) Can we have a note in the changelog for the next release to warn the few kdd users that we've done this?

Cheers,

Tim.

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

Tim Deegan writes ("Re: [PATCH 18/18] tools/debugger/kdd: Install as xen-kdd', not just kdd'"):

Mmm, sorry. Err, where are such release notes collected ?

CC'ing Juergen as RM.

Thanks,
Ian.

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

I believe this is a manual process triggered by the Community Manager.

I'm fine with collecting RN snipplets for the upcoming release, of course.

Ian, another question: could we add a link to the release note of the related version on:

https://xenbits.xen.org/docs/unstable/support-matrix.html

like it was done on:

https://wiki.xenproject.org/wiki/Xen_Project_Release_Features

Juergen

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

Juergen Gross writes ("Re: [Xen-devel] [PATCH 18/18] tools/debugger/kdd: Install as xen-kdd', not just kdd'"):

Thanks. Can you add kdd -> xen-kdd to that list then please ?

Yes, I think so. That page is generated by
docs/support-matrix-generate
docs/parse-support-md
which consumes
SUPPORT.md
from each tree.

I think if we change SUPPORT.md to have a proper hyperlink to the release notes, in each tree, in the Release Support indented stanza, it will appear on the support matrix page.

That is better than having the url be magically inserted by the matrix generation machinery because it will appear in places like this too
https://xenbits.xen.org/docs/4.11-testing/SUPPORT.html

Would you prepare a patch for 4.11 to add the RN URL ? You can perhaps test the support matrix output by running a variant of the rune at the top of
docs/support-matrix-generate
and I will fix the matrix code it if it doesn't seem to work :-).

Regards,
Ian.

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

Ian Jackson writes ("[PATCH 00/18] Miscellaneous build and docs, fixes from Debian"):

Thanks to the reviewers. I have pushed to staging these patches, which were acked/reviewed and seemed to me to be uncontroversial:

Subject to further comments, I will repost the remainder as a v2 of the series.

Ian.

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel