riscv: dts: Add ae350_32.dts for 32 bit
PATCH 2/2 riscv: dts: Add ae350_32.dts for 32 bit
From: Rick Chen <[email protected]>
Add ae350_32.dts for 32 bit. And also renameae350.dts to ae350_64.dts for 64 bit.
--- arch/riscv/dts/ae350.dts | 229 -------------------------------------------- arch/riscv/dts/ae350_32.dts | 229 ++++++++++++++++++++++++++++++++++++++++++++ arch/riscv/dts/ae350_64.dts | 229 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 458 insertions(+), 229 deletions(-) delete mode 100644 arch/riscv/dts/ae350.dts create mode 100644 arch/riscv/dts/ae350_32.dts create mode 100644 arch/riscv/dts/ae350_64.dts
arch/riscv/dts/ae350.dts deleted +0 -229
@@ -1,229 +0,0 @@ -/dts-v1/; - -/ { - #address-cells = <2>; - #size-cells = <2>; - compatible = "andestech,ax25"; - model = "andestech,ax25"; - - aliases { - uart0 = &serial0; - spi0 = &spi; - }; - - chosen { - bootargs = "console=ttyS0,38400n8 debug loglevel=7"; - stdout-path = "uart0:38400n8"; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - timebase-frequency = <60000000>; - CPU0: cpu at 0 { - device_type = "cpu"; - reg = <0>; - status = "okay"; - compatible = "riscv"; - riscv,isa = "rv64imafdc"; - mmu-type = "riscv,sv39"; - clock-frequency = <60000000>; - d-cache-size = <0x8000>; - d-cache-line-size = <32>; - CPU0_intc: interrupt-controller { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "riscv,cpu-intc"; - }; - }; - }; - - memory at 0 { - device_type = "memory"; - reg = <0x0 0x00000000 0x0 0x40000000>; - }; - - soc { - #address-cells = <2>; - #size-cells = <2>; - compatible = "andestech,riscv-ae350-soc"; - ranges; - - plic0: interrupt-controller at e4000000 { - compatible = "riscv,plic0"; - #address-cells = <2>; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0x0 0xe4000000 0x0 0x2000000>; - riscv,ndev=<71>; - interrupts-extended = <&CPU0_intc 11 &CPU0_intc 9>; - }; - - plic1: interrupt-controller at e6400000 { - compatible = "riscv,plic1"; - #address-cells = <2>; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0x0 0xe6400000 0x0 0x400000>; - riscv,ndev=<1>; - interrupts-extended = <&CPU0_intc 3>; - }; - - plmt0 at e6000000 { - compatible = "riscv,plmt0"; - interrupts-extended = <&CPU0_intc 7>; - reg = <0x0 0xe6000000 0x0 0x100000>; - }; - }; - - spiclk: virt_100mhz { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; - }; - - timer0: timer at f0400000 { - compatible = "andestech,atcpit100"; - reg = <0x0 0xf0400000 0x0 0x1000>; - clock-frequency = <60000000>; - interrupts = <3 4>; - interrupt-parent = <&plic0>; - }; - - serial0: serial at f0300000 { - compatible = "andestech,uart16550", "ns16550a"; - reg = <0x0 0xf0300000 0x0 0x1000>; - interrupts = <9 4>; - clock-frequency = <19660800>; - reg-shift = <2>; - reg-offset = <32>; - no-loopback-test = <1>; - interrupt-parent = <&plic0>; - }; - - mac0: mac at e0100000 { - compatible = "andestech,atmac100"; - reg = <0x0 0xe0100000 0x0 0x1000>; - interrupts = <19 4>; - interrupt-parent = <&plic0>; - }; - - mmc0: mmc at f0e00000 { - compatible = "andestech,atfsdc010"; - max-frequency = <100000000>; - clock-freq-min-max = <400000 100000000>; - fifo-depth = <0x10>; - reg = <0x0 0xf0e00000 0x0 0x1000>; - interrupts = <18 4>; - cap-sd-highspeed; - interrupt-parent = <&plic0>; - }; - - dma0: dma at f0c00000 { - compatible = "andestech,atcdmac300"; - reg = <0x0 0xf0c00000 0x0 0x1000>; - interrupts = <10 4 64 4 65 4 66 4 67 4 68 4 69 4 70 4 71 4>; - dma-channels = <8>; - interrupt-parent = <&plic0>; - }; - - lcd0: lcd at e0200000 { - compatible = "andestech,atflcdc100"; - reg = <0x0 0xe0200000 0x0 0x1000>; - interrupts = <20 4>; - interrupt-parent = <&plic0>; - }; - - smc0: smc at e0400000 { - compatible = "andestech,atfsmc020"; - reg = <0x0 0xe0400000 0x0 0x1000>; - }; - - snd0: snd at f0d00000 { - compatible = "andestech,atfac97"; - reg = <0x0 0xf0d00000 0x0 0x1000>; - interrupts = <17 4>; - interrupt-parent = <&plic0>; - }; - - virtio_mmio at fe007000 { - interrupts = <0x17 0x4>; - interrupt-parent = <0x2>; - reg = <0x0 0xfe007000 0x0 0x1000>; - compatible = "virtio,mmio"; - }; - - virtio_mmio at fe006000 { - interrupts = <0x16 0x4>; - interrupt-parent = <0x2>; - reg = <0x0 0xfe006000 0x0 0x1000>; - compatible = "virtio,mmio"; - }; - - virtio_mmio at fe005000 { - interrupts = <0x15 0x4>; - interrupt-parent = <0x2>; - reg = <0x0 0xfe005000 0x0 0x1000>; - compatible = "virtio,mmio"; - }; - - virtio_mmio at fe004000 { - interrupts = <0x14 0x4>; - interrupt-parent = <0x2>; - reg = <0x0 0xfe004000 0x0 0x1000>; - compatible = "virtio,mmio"; - }; - - virtio_mmio at fe003000 { - interrupts = <0x13 0x4>; - interrupt-parent = <0x2>; - reg = <0x0 0xfe003000 0x0 0x1000>; - compatible = "virtio,mmio"; - }; - - virtio_mmio at fe002000 { - interrupts = <0x12 0x4>; - interrupt-parent = <0x2>; - reg = <0x0 0xfe002000 0x0 0x1000>; - compatible = "virtio,mmio"; - }; - - virtio_mmio at fe001000 { - interrupts = <0x11 0x4>; - interrupt-parent = <0x2>; - reg = <0x0 0xfe001000 0x0 0x1000>; - compatible = "virtio,mmio"; - }; - - virtio_mmio at fe000000 { - interrupts = <0x10 0x4>; - interrupt-parent = <0x2>; - reg = <0x0 0xfe000000 0x0 0x1000>; - compatible = "virtio,mmio"; - }; - - nor at 0,0 { - compatible = "cfi-flash"; - reg = <0x0 0x88000000 0x0 0x1000>; - bank-width = <2>; - device-width = <1>; - }; - - spi: spi at f0b00000 { - compatible = "andestech,atcspi200"; - reg = <0x0 0xf0b00000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - num-cs = <1>; - clocks = <&spiclk>; - interrupts = <4 4>; - interrupt-parent = <&plic0>; - flash at 0 { - compatible = "spi-flash"; - spi-max-frequency = <50000000>; - reg = <0>; - spi-cpol; - spi-cpha; - }; - }; -};
arch/riscv/dts/ae350_32.dts new file +229 -0
229 lines not on this page · raw message
arch/riscv/dts/ae350_64.dts new file +229 -0
229 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 2/2 riscv: dts: Add ae350_32.dts for 32 bit
Hi Rick,
Quoted 8 lines · Andes
From: Rick Chen <[email protected]>
Add
ae350_32.dtsfor 32 bit. And also renameae350.dtstoae350_64.dtsfor 64 bit.Signed-off-by Rick Chen <[email protected]>Cc Greentime Hu <[email protected]>
Quoted 9 lines
--- arch/riscv/dts/ae350.dts | 229 -------------------------------------------- arch/riscv/dts/ae350_32.dts | 229 ++++++++++++++++++++++++++++++++++++++++++++ arch/riscv/dts/ae350_64.dts | 229 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 458 insertions(+), 229 deletions(-) delete mode 100644 arch/riscv/dts/ae350.dts create mode 100644 arch/riscv/dts/ae350_32.dts create mode 100644 arch/riscv/dts/ae350_64.dts
It looks to me that the only difference between these two dts files are the cpu node (rv32 vs rv64). Can we please put the common part into a dtsi file and let the main dts file include the dtsi file and override anything if needed?
Regards,
Bin
PATCH 2/2 riscv: dts: Add ae350_32.dts for 32 bit
Bin Meng <[email protected]> 於 2018年10月8日 週一 下午11:48寫道:
Quoted 22 lines
Hi Rick,
Quoted 8 lines · Andes
From: Rick Chen <[email protected]>
Add
ae350_32.dtsfor 32 bit. And also renameae350.dtstoae350_64.dtsfor 64 bit.Signed-off-by Rick Chen <[email protected]>Cc Greentime Hu <[email protected]>Quoted 9 lines
--- arch/riscv/dts/ae350.dts | 229 -------------------------------------------- arch/riscv/dts/ae350_32.dts | 229 ++++++++++++++++++++++++++++++++++++++++++++ arch/riscv/dts/ae350_64.dts | 229 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 458 insertions(+), 229 deletions(-) delete mode 100644 arch/riscv/dts/ae350.dts create mode 100644 arch/riscv/dts/ae350_32.dts create mode 100644 arch/riscv/dts/ae350_64.dts
Quoted 5 lines
It looks to me that the only difference between these two dts files are the cpu node (rv32 vs rv64). Can we please put the common part into a dtsi file and let the main dts file include the dtsi file and override anything if needed?
Hi Bin
I will separate the common into a dtsi file. And others into dts file.
Thanks
Rick
Quoted 2 lines
Regards,
Bin
PATCH 2/2 riscv: dts: Add ae350_32.dts for 32 bit
Rick Chen <[email protected]> 於 2018年10月16日 週二 上午10:01寫道:
Quoted 30 lines
Bin Meng <[email protected]> 於 2018年10月8日 週一 下午11:48寫道:
Quoted 22 lines
Hi Rick,
Quoted 8 lines · Andes
From: Rick Chen <[email protected]>
Add
ae350_32.dtsfor 32 bit. And also renameae350.dtstoae350_64.dtsfor 64 bit.Signed-off-by Rick Chen <[email protected]>Cc Greentime Hu <[email protected]>Quoted 9 lines
--- arch/riscv/dts/ae350.dts | 229 -------------------------------------------- arch/riscv/dts/ae350_32.dts | 229 ++++++++++++++++++++++++++++++++++++++++++++ arch/riscv/dts/ae350_64.dts | 229 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 458 insertions(+), 229 deletions(-) delete mode 100644 arch/riscv/dts/ae350.dts create mode 100644 arch/riscv/dts/ae350_32.dts create mode 100644 arch/riscv/dts/ae350_64.dtsQuoted 5 lines
It looks to me that the only difference between these two dts files are the cpu node (rv32 vs rv64). Can we please put the common part into a dtsi file and let the main dts file include the dtsi file and override anything if needed?
Quoted 4 lines
Hi Bin
I will separate the common into a dtsi file. And others into dts file.
Hi Bin
I am trying to put the common part in a ae350.dtsi from ae350_32.dts and ae350_64.dts.
But i encounter a problem as below :
smc node for 32 bit :
smc0: smc at e0400000 {
compatible = "andestech,atfsmc020";
reg = <0xe0400000 0x1000>;
};
smc node for 64 bit :
smc0: smc at e0400000 {
compatible = "andestech,atfsmc020";
reg = <0x0 0xe0400000 0x0 0x1000>;
};
Though they look like almost the same, but their reg is different. Since can not put in a dtsi file for sharing.
Do you have any idea ?
Rick
Quoted 6 lines
Thanks
Rick
Quoted 2 lines
Regards,
Bin
PATCH 2/2 riscv: dts: Add ae350_32.dts for 32 bit
Hi Rick,
Quoted 57 lines · Rick Chen
Rick Chen <[email protected]> 於 2018年10月16日 週二 上午10:01寫道:
Quoted 30 lines
Bin Meng <[email protected]> 於 2018年10月8日 週一 下午11:48寫道:
Quoted 22 lines
Hi Rick,
Quoted 8 lines · Andes
From: Rick Chen <[email protected]>
Add
ae350_32.dtsfor 32 bit. And also renameae350.dtstoae350_64.dtsfor 64 bit.Signed-off-by Rick Chen <[email protected]>Cc Greentime Hu <[email protected]>Quoted 9 lines
--- arch/riscv/dts/ae350.dts | 229 -------------------------------------------- arch/riscv/dts/ae350_32.dts | 229 ++++++++++++++++++++++++++++++++++++++++++++ arch/riscv/dts/ae350_64.dts | 229 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 458 insertions(+), 229 deletions(-) delete mode 100644 arch/riscv/dts/ae350.dts create mode 100644 arch/riscv/dts/ae350_32.dts create mode 100644 arch/riscv/dts/ae350_64.dtsQuoted 5 lines
It looks to me that the only difference between these two dts files are the cpu node (rv32 vs rv64). Can we please put the common part into a dtsi file and let the main dts file include the dtsi file and override anything if needed?
Quoted 4 lines
Hi Bin
I will separate the common into a dtsi file. And others into dts file.
Hi Bin
I am trying to put the common part in a
ae350.dtsifromae350_32.dtsandae350_64.dts.
But i encounter a problem as below :smc node for 32 bit :
smc0: smc at
e0400000{
compatible = "andestech,atfsmc020";
reg = <0xe04000000x1000>;
};smc node for 64 bit :
smc0: smc at
e0400000{
compatible = "andestech,atfsmc020";
reg = <0x00xe04000000x00x1000>;
};
Quoted 5 lines
Though they look like almost the same, but their reg is different. Since can not put in a dtsi file for sharing.
Do you have any idea ?
So the register physical address and size are the same and both are below 4GB. In such case, the 64-bit DTS should have the same #address-cells and #size-cells as the 32-bit one.
Regards,
Bin