Skip to contentSkip to conversation

scsi: ceva: add ls1088a soc support

PATCH New Peng Ma 3 participants 7 messages Oct 22, 2018 – Dec 10, 2018

Subsystems (2)
lore
Share & tools
lore

Peng Ma

author
#0 lore raw

PATCH 1/3 scsi: ceva: add ls1088a soc support

Add ahci compatible support for ls1088a soc.

---
depend on:
- https://patchwork.ozlabs.org/patch/982386/

 drivers/ata/sata_ceva.c |   22 ++++++++++++++++++----
 1 files changed, 18 insertions(+), 4 deletions(-)
drivers/ata/sata_ceva.c +18 -4
index a2d21d9..fa86797 100644
@@ -82,15 +82,19 @@
 #define CEVA_AXICC_CFG	0x3fffffff
 
 /* for ls1021a */
-#define LS1021_AHCI_VEND_AXICC 0xC0
+#define LS1021_AHCI_VEND_AXICC	0xC0
 #define LS1021_CEVA_PHY2_CFG	0x28183414
 #define LS1021_CEVA_PHY3_CFG	0x0e080e06
 #define LS1021_CEVA_PHY4_CFG	0x064a080b
 #define LS1021_CEVA_PHY5_CFG	0x2aa86470
 
+/* for ls1088a */
+#define LS1088_ECC_DIS_ADDR_CH2	0x100520
+#define LS1088_ECC_DIS_VAL_CH2	0x40000000
+
 /* ecc addr-val pair */
-#define ECC_DIS_ADDR_CH2	0x80000000
-#define ECC_DIS_VAL_CH2		0x20140520
+#define ECC_DIS_ADDR_CH2	0x20140520
+#define ECC_DIS_VAL_CH2		0x80000000
 #define SATA_ECC_REG_ADDR	0x20220520
 #define SATA_ECC_DISABLE	0x00020000
 
@@ -100,6 +104,7 @@ enum ceva_soc {
 	CEVA_LS1021A,
 	CEVA_LS1043A,
 	CEVA_LS1046A,
+	CEVA_LS1088A,
 };
 
 struct ceva_sata_priv {
@@ -140,7 +145,15 @@ static int ceva_init_sata(struct ceva_sata_priv *priv)
 	case CEVA_LS1012A:
 	case CEVA_LS1043A:
 	case CEVA_LS1046A:
-		writel(ECC_DIS_ADDR_CH2, ECC_DIS_VAL_CH2);
+		writel(ECC_DIS_VAL_CH2, ECC_DIS_ADDR_CH2);
+		writel(CEVA_PHY1_CFG, base + AHCI_VEND_PPCFG);
+		writel(CEVA_TRANS_CFG, base + AHCI_VEND_PTC);
+		if (priv->flag & FLAG_COHERENT)
+			writel(CEVA_AXICC_CFG, base + AHCI_VEND_AXICC);
+		break;
+
+	case CEVA_LS1088A:
+		writel(LS1088_ECC_DIS_VAL_CH2, LS1088_ECC_DIS_ADDR_CH2);
 		writel(CEVA_PHY1_CFG, base + AHCI_VEND_PPCFG);
 		writel(CEVA_TRANS_CFG, base + AHCI_VEND_PTC);
 		if (priv->flag & FLAG_COHERENT)
@@ -173,6 +186,7 @@ static const struct udevice_id sata_ceva_ids[] = {
 	{ .compatible = "fsl,ls1021a-ahci", .data = CEVA_LS1021A },
 	{ .compatible = "fsl,ls1043a-ahci", .data = CEVA_LS1043A },
 	{ .compatible = "fsl,ls1046a-ahci", .data = CEVA_LS1046A },
+	{ .compatible = "fsl,ls1088a-ahci", .data = CEVA_LS1088A },
 	{ }
 };
 
Signature · 1 line
1.7.1
author
#1 lore raw

PATCH 2/3 armv8: dts: fsl-ls1088a: add sata node support

One ls1088a, there is one SATA 3.0 advanced host controller interface which is a high-performance SATA solution that delivers comprehensive and fully-compliant generation 3 (1.5 Gb/s - 6.0 Gb/s) serial ATA capabilities, in accordance with the serial ATA revision 3.0 of Serial ATA International Organization.
Add sata node to support this feature.

---
 arch/arm/dts/fsl-ls1088a-qds.dts |    4 ++++
 arch/arm/dts/fsl-ls1088a-rdb.dts |    4 ++++
 arch/arm/dts/fsl-ls1088a.dtsi    |    8 ++++++++
 3 files changed, 16 insertions(+), 0 deletions(-)
arch/arm/dts/fsl-ls1088a-qds.dts +4 -0
index 36116f7..4ea451c 100644
@@ -104,3 +104,7 @@
 		reg = <1>;
 	 };
 };
+
+&sata {
+	status = "okay";
+};
arch/arm/dts/fsl-ls1088a-rdb.dts +4 -0
index 0be3f8d..f30bbb7 100644
@@ -37,3 +37,7 @@
 		reg = <1>;
 	 };
 };
+
+&sata {
+	status = "okay";
+};
arch/arm/dts/fsl-ls1088a.dtsi +8 -0
index 72d755a..9455e03 100644
@@ -150,4 +150,12 @@
 		ranges = <0x81000000 0x0 0x00000000 0x30 0x00020000 0x0 0x00010000   /* downstream I/O */
 			  0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 	};
+
+	sata: sata at 3200000 {
+		compatible = "fsl,ls1088a-ahci";
+		reg = <0x0 0x3200000 0x0 0x10000>;
+		interrupts = <0 133 4>;
+		status = "disabled";
+	};
+
 };
Signature · 1 line
1.7.1
#2 lore raw

PATCH 2/3 armv8: dts: fsl-ls1088a: add sata node support

Quoted 7 lines · Peng Ma

One ls1088a, there is one SATA 3.0 advanced host controller interface which is a high-performance SATA solution that delivers comprehensive and fully-compliant generation 3 (1.5 Gb/s - 6.0 Gb/s) serial ATA capabilities, in accordance with the serial ATA revision 3.0 of Serial ATA International Organization.
Add sata node to support this feature.

Quoted 6 lines
---
 arch/arm/dts/fsl-ls1088a-qds.dts |    4 ++++
 arch/arm/dts/fsl-ls1088a-rdb.dts |    4 ++++
 arch/arm/dts/fsl-ls1088a.dtsi    |    8 ++++++++
 3 files changed, 16 insertions(+), 0 deletions(-)
author
#3 lore raw

PATCH 3/3 arm64: ls1088a: enable DM support for sata

In reply to Peng Ma

Enable related configs to support sata DM feature.

---
 configs/ls1088aqds_defconfig      |    5 +++++
 configs/ls1088ardb_qspi_defconfig |    5 +++++
 2 files changed, 10 insertions(+), 0 deletions(-)
configs/ls1088aqds_defconfig +5 -0
index 64677f0..3010f24 100644
@@ -49,3 +49,8 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_BLK=y
 CONFIG_DM_MMC=y
+CONFIG_DM_SCSI=y
+CONFIG_SATA_CEVA=y
+CONFIG_SCSI_AHCI=y
+CONFIG_SCSI=y
+CONFIG_AHCI=y
configs/ls1088ardb_qspi_defconfig +5 -0
index 1feaded..9959703 100644
@@ -55,3 +55,8 @@ CONFIG_USB_GADGET=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_BLK=y
 CONFIG_DM_MMC=y
+CONFIG_DM_SCSI=y
+CONFIG_SATA_CEVA=y
+CONFIG_SCSI_AHCI=y
+CONFIG_SCSI=y
+CONFIG_AHCI=y
Signature · 1 line
1.7.1