scsi: ceva: add ls1088a soc support
Subsystems (2)
PATCH 1/3 scsi: ceva: add ls1088a soc support
Add ahci compatible support for ls1088a soc.
---
depend on:
- https://patchwork.ozlabs.org/patch/982386/
drivers/ata/sata_ceva.c | 22 ++++++++++++++++++---- 1 files changed, 18 insertions(+), 4 deletions(-)
drivers/ata/sata_ceva.c +18 -4
@@ -82,15 +82,19 @@#define CEVA_AXICC_CFG 0x3fffffff/* for ls1021a */ -#define LS1021_AHCI_VEND_AXICC 0xC0 +#define LS1021_AHCI_VEND_AXICC 0xC0#define LS1021_CEVA_PHY2_CFG 0x28183414#define LS1021_CEVA_PHY3_CFG 0x0e080e06#define LS1021_CEVA_PHY4_CFG 0x064a080b#define LS1021_CEVA_PHY5_CFG 0x2aa86470 +/* for ls1088a */ +#define LS1088_ECC_DIS_ADDR_CH2 0x100520 +#define LS1088_ECC_DIS_VAL_CH2 0x40000000 +/* ecc addr-val pair */ -#define ECC_DIS_ADDR_CH2 0x80000000 -#define ECC_DIS_VAL_CH2 0x20140520 +#define ECC_DIS_ADDR_CH2 0x20140520 +#define ECC_DIS_VAL_CH2 0x80000000#define SATA_ECC_REG_ADDR 0x20220520#define SATA_ECC_DISABLE 0x00020000
@@ -100,6 +104,7 @@ enum ceva_soc {CEVA_LS1021A ,CEVA_LS1043A ,CEVA_LS1046A , + CEVA_LS1088A, }; struct ceva_sata_priv {
@@ -140,7 +145,15 @@ static int ceva_init_sata(struct ceva_sata_priv *priv)case CEVA_LS1012A :case CEVA_LS1043A :case CEVA_LS1046A : -writel (ECC_DIS_ADDR_CH2 ,ECC_DIS_VAL_CH2 ); +writel (ECC_DIS_VAL_CH2 ,ECC_DIS_ADDR_CH2 ); +writel (CEVA_PHY1_CFG , base +AHCI_VEND_PPCFG ); +writel (CEVA_TRANS_CFG , base +AHCI_VEND_PTC ); +if (priv->flag &FLAG_COHERENT ) +writel (CEVA_AXICC_CFG , base +AHCI_VEND_AXICC ); +break ; + +case CEVA_LS1088A : +writel (LS1088_ECC_DIS_VAL_CH2 ,LS1088_ECC_DIS_ADDR_CH2 );writel (CEVA_PHY1_CFG , base +AHCI_VEND_PPCFG );writel (CEVA_TRANS_CFG , base +AHCI_VEND_PTC );if (priv->flag &FLAG_COHERENT )
@@ -173,6 +186,7 @@ static const struct udevice_id sata_ceva_ids[] = { { .compatible = "fsl,ls1021a-ahci", .data = CEVA_LS1021A }, { .compatible = "fsl,ls1043a-ahci", .data = CEVA_LS1043A }, { .compatible = "fsl,ls1046a-ahci", .data = CEVA_LS1046A }, + { .compatible = "fsl,ls1088a-ahci", .data = CEVA_LS1088A }, { } };
Signature · 1 line
1.7.1
PATCH 2/3 armv8: dts: fsl-ls1088a: add sata node support
One ls1088a, there is one SATA 3.0 advanced host controller interface which is a high-performance SATA solution that delivers comprehensive and fully-compliant generation 3 (1.5 Gb/s - 6.0 Gb/s) serial ATA capabilities, in accordance with the serial ATA revision 3.0 of Serial ATA International Organization.
Add sata node to support this feature.
--- arch/arm/dts/fsl-ls1088a-qds.dts | 4 ++++ arch/arm/dts/fsl-ls1088a-rdb.dts | 4 ++++ arch/arm/dts/fsl-ls1088a.dtsi | 8 ++++++++ 3 files changed, 16 insertions(+), 0 deletions(-)
arch/arm/dts/fsl-ls1088a-qds.dts +4 -0
@@ -104,3 +104,7 @@ reg = <1>; }; }; + +&sata { + status = "okay"; +};
arch/arm/dts/fsl-ls1088a-rdb.dts +4 -0
@@ -37,3 +37,7 @@ reg = <1>; }; }; + +&sata { + status = "okay"; +};
arch/arm/dts/fsl-ls1088a.dtsi +8 -0
@@ -150,4 +150,12 @@ ranges = <0x81000000 0x0 0x00000000 0x30 0x00020000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; + + sata: sata at 3200000 { + compatible = "fsl,ls1088a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = <0 133 4>; + status = "disabled"; + }; + };
Signature · 1 line
1.7.1
PATCH 2/3 armv8: dts: fsl-ls1088a: add sata node support
Quoted 7 lines · Peng Ma
One ls1088a, there is one SATA 3.0 advanced host controller interface which is a high-performance SATA solution that delivers comprehensive and fully-compliant generation 3 (1.5 Gb/s - 6.0 Gb/s) serial ATA capabilities, in accordance with the serial ATA revision 3.0 of Serial ATA International Organization.
Add sata node to support this feature.
Quoted 6 lines
Signed-off-by Peng Ma <[email protected]>--- arch/arm/dts/fsl-ls1088a-qds.dts | 4 ++++ arch/arm/dts/fsl-ls1088a-rdb.dts | 4 ++++ arch/arm/dts/fsl-ls1088a.dtsi | 8 ++++++++ 3 files changed, 16 insertions(+), 0 deletions(-)
PATCH 3/3 arm64: ls1088a: enable DM support for sata
In reply to Peng MaEnable related configs to support sata DM feature.
--- configs/ls1088aqds_defconfig | 5 +++++ configs/ls1088ardb_qspi_defconfig | 5 +++++ 2 files changed, 10 insertions(+), 0 deletions(-)
configs/ls1088aqds_defconfig +5 -0
@@ -49,3 +49,8 @@ CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_BLK=y CONFIG_DM_MMC=y +CONFIG_DM_SCSI=y +CONFIG_SATA_CEVA=y +CONFIG_SCSI_AHCI=y +CONFIG_SCSI=y +CONFIG_AHCI=y
configs/ls1088ardb_qspi_defconfig +5 -0
@@ -55,3 +55,8 @@ CONFIG_USB_GADGET=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y CONFIG_BLK=y CONFIG_DM_MMC=y +CONFIG_DM_SCSI=y +CONFIG_SATA_CEVA=y +CONFIG_SCSI_AHCI=y +CONFIG_SCSI=y +CONFIG_AHCI=y
Signature · 1 line
1.7.1
PATCH 3/3 arm64: ls1088a: enable DM support for sata
Quoted 7 lines · Peng Ma
Enable related configs to support sata DM feature.
Signed-off-by Peng Ma <[email protected]>--- configs/ls1088aqds_defconfig | 5 +++++ configs/ls1088ardb_qspi_defconfig | 5 +++++ 2 files changed, 10 insertions(+), 0 deletions(-)
PATCH 1/3 scsi: ceva: add ls1088a soc support
In reply to Peng MaQuoted 10 lines · Peng Ma
Add ahci compatible support for ls1088a soc.
Signed-off-by Peng Ma <[email protected]>---
depend on:
- https://patchwork.ozlabs.org/patch/982386/drivers/ata/sata_ceva.c | 22 ++++++++++++++++++---- 1 files changed, 18 insertions(+), 4 deletions(-)
PATCH 1/3 scsi: ceva: add ls1088a soc support
In reply to Peng MaQuoted 4 lines · Peng Ma
Add ahci compatible support for ls1088a soc.
Signed-off-by Peng Ma <[email protected]>---
This set is applied to fsl-qoriq master, awaiting upstream. Thanks.
York