Skip to contentSkip to conversation

drm/i915/icl: Fix the macros for DFLEXDPMLE register bits

PATCH Applied Manasi Navare 3 participants 7 messages Oct 23, 2018 – Oct 31, 2018

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 drm/i915/icl: Fix the macros for DFLEXDPMLE register bits

This patch fixes the macros used for defining the DFLEXDPMLE register bit fields. This accounts for changes in the spec.

Fixes a2bc69a1a9d6 ("drm/i915/icl: Add register definition for DFLEXDPMLE")
Cc Animesh Manna <[email protected]>
Cc Paulo Zanoni <[email protected]>
Cc Jose Roberto de Souza <[email protected]>
---
 drivers/gpu/drm/i915/i915_reg.h | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +6 -2
index 8bd61f946714..9da489b176c9 100644
@@ -2057,8 +2057,12 @@ enum i915_power_well_id {
 
 /* ICL PHY DFLEX registers */
 #define PORT_TX_DFLEXDPMLE1		_MMIO(0x1638C0)
-#define   DFLEXDPMLE1_DPMLETC_MASK(n)	(0xf << (4 * (n)))
-#define   DFLEXDPMLE1_DPMLETC(n, x)	((x) << (4 * (n)))
+#define   DFLEXDPMLE1_DPMLETC_MASK(tc_port)	(0xf << (4 * (tc_port)))
+#define   DFLEXDPMLE1_DPMLETC_ML0(tc_port)	(1 << (4 * (tc_port)))
+#define   DFLEXDPMLE1_DPMLETC_ML1_0(tc_port)	(3 << (4 * (tc_port)))
+#define   DFLEXDPMLE1_DPMLETC_ML3(tc_port)	(8 << (4 * (tc_port)))
+#define   DFLEXDPMLE1_DPMLETC_ML3_2(tc_port)	(12 << (4 * (tc_port)))
+#define   DFLEXDPMLE1_DPMLETC_ML3_0(tc_port)	(15 << (4 * (tc_port)))
 
 /* BXT PHY Ref registers */
 #define _PORT_REF_DW3_A			0x16218C
Signature · 6 lines
2.18.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH v2 2/2 drm/i915/ICL: Add pre_pll_enable hook for ICL and set DFLEXDPMLE in this hook

In case of Legacy DP connector on TypeC port, the
flex IO DPMLE register is set to number of lanes configured by the display driver which will be programmed into DDI_BUF_CTL PORT_WIDTH_SELECTION.
This needs to be programmed before enabling the shared PLLs hence add a pre_pll_enable hook for ICL and add this programming in that hook.

v2:
* Remove the check for combophy port (Jose)
* Simplify the port reversal check logic (Jose)

Cc Lucas De Marchi <[email protected]>
Cc Jose Roberto de Souza <[email protected]>
Cc Animesh Manna <[email protected]>
Cc Paulo Zanoni <[email protected]>
---
 drivers/gpu/drm/i915/intel_ddi.c | 49 ++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
drivers/gpu/drm/i915/intel_ddi.c +49 -0
index 6b9742baa5f2..246424605768 100644
@@ -3311,6 +3311,53 @@ static void bxt_ddi_pre_pll_enable(struct intel_encoder *encoder,
 	bxt_ddi_phy_set_lane_optim_mask(encoder, mask);
 }
 
+static void intel_ddi_set_fia_lane_count(struct intel_encoder *encoder,
+					 const struct intel_crtc_state *pipe_config,
+					 enum port port)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
+	enum tc_port tc_port = intel_port_to_tc(dev_priv, port);
+	u32 val = I915_READ(PORT_TX_DFLEXDPMLE1);
+	bool lane_reversal = dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
+
+	val &= ~DFLEXDPMLE1_DPMLETC_MASK(tc_port);
+	switch (pipe_config->lane_count) {
+	case 1:
+		val |= (lane_reversal) ? DFLEXDPMLE1_DPMLETC_ML3(tc_port) :
+		DFLEXDPMLE1_DPMLETC_ML0(tc_port);
+		break;
+	case 2:
+		val |= (lane_reversal) ? DFLEXDPMLE1_DPMLETC_ML3_2(tc_port) :
+		DFLEXDPMLE1_DPMLETC_ML1_0(tc_port);
+		break;
+	case 4:
+		val |= DFLEXDPMLE1_DPMLETC_ML3_0(tc_port);
+		break;
+	default:
+		MISSING_CASE(pipe_config->lane_count);
+	}
+	I915_WRITE(PORT_TX_DFLEXDPMLE1, val);
+}
+
+static void icl_ddi_pre_pll_enable(struct intel_encoder *encoder,
+				   const struct intel_crtc_state *pipe_config,
+				   const struct drm_connector_state *conn_state)
+{
+	enum port port = encoder->port;
+	struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
+
+	/*
+	 * Program the lane count for static/dynamic connections on Type-C ports.
+	 * Skip this step for TBT.
+	 */
+	if (dig_port->tc_type == TC_PORT_UNKNOWN ||
+	    dig_port->tc_type == TC_PORT_TBT)
+		return;
+
+	intel_ddi_set_fia_lane_count(encoder, pipe_config, port);
+}
+
 void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp)
 {
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
@@ -3828,6 +3875,8 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
 	intel_encoder->enable = intel_enable_ddi;
 	if (IS_GEN9_LP(dev_priv))
 		intel_encoder->pre_pll_enable = bxt_ddi_pre_pll_enable;
+	if (IS_ICELAKE(dev_priv))
+		intel_encoder->pre_pll_enable = icl_ddi_pre_pll_enable;
 	intel_encoder->pre_enable = intel_ddi_pre_enable;
 	intel_encoder->disable = intel_disable_ddi;
 	intel_encoder->post_disable = intel_ddi_post_disable;
Signature · 6 lines
2.18.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Acked-by on v2 2/2
#2 lore raw

Re: [PATCH v2 2/2] drm/i915/ICL: Add pre_pll_enable hook for ICL and set DFLEXDPMLE in this hook

Quoted 11 lines · Manasi Navare

In case of Legacy DP connector on TypeC port, the
flex IO DPMLE register is set to number of lanes configured by the display driver which will be programmed into DDI_BUF_CTL PORT_WIDTH_SELECTION.
This needs to be programmed before enabling the shared PLLs hence add a pre_pll_enable hook for ICL and add this programming in that hook.

v2:
* Remove the check for combophy port (Jose)
* Simplify the port reversal check logic (Jose)

Quoted 6 lines
Cc Lucas De Marchi <[email protected]>
Cc Jose Roberto de Souza <[email protected]>
Cc Animesh Manna <[email protected]>
Cc Paulo Zanoni <[email protected]>

Looks ok:

Manasi, are you going to merge this? I could rebase my patchset after that.

Quoted 78 lines
---
 drivers/gpu/drm/i915/intel_ddi.c | 49 ++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
drivers/gpu/drm/i915/intel_ddi.c +49 -0
index 6b9742baa5f2..246424605768 100644
@@ -3311,6 +3311,53 @@ static void bxt_ddi_pre_pll_enable(struct intel_encoder *encoder,
 	bxt_ddi_phy_set_lane_optim_mask(encoder, mask);
 }
 
+static void intel_ddi_set_fia_lane_count(struct intel_encoder *encoder,
+					 const struct intel_crtc_state *pipe_config,
+					 enum port port)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
+	enum tc_port tc_port = intel_port_to_tc(dev_priv, port);
+	u32 val = I915_READ(PORT_TX_DFLEXDPMLE1);
+	bool lane_reversal = dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
+
+	val &= ~DFLEXDPMLE1_DPMLETC_MASK(tc_port);
+	switch (pipe_config->lane_count) {
+	case 1:
+		val |= (lane_reversal) ? DFLEXDPMLE1_DPMLETC_ML3(tc_port) :
+		DFLEXDPMLE1_DPMLETC_ML0(tc_port);
+		break;
+	case 2:
+		val |= (lane_reversal) ? DFLEXDPMLE1_DPMLETC_ML3_2(tc_port) :
+		DFLEXDPMLE1_DPMLETC_ML1_0(tc_port);
+		break;
+	case 4:
+		val |= DFLEXDPMLE1_DPMLETC_ML3_0(tc_port);
+		break;
+	default:
+		MISSING_CASE(pipe_config->lane_count);
+	}
+	I915_WRITE(PORT_TX_DFLEXDPMLE1, val);
+}
+
+static void icl_ddi_pre_pll_enable(struct intel_encoder *encoder,
+				   const struct intel_crtc_state *pipe_config,
+				   const struct drm_connector_state *conn_state)
+{
+	enum port port = encoder->port;
+	struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
+
+	/*
+	 * Program the lane count for static/dynamic connections on Type-C ports.
+	 * Skip this step for TBT.
+	 */
+	if (dig_port->tc_type == TC_PORT_UNKNOWN ||
+	    dig_port->tc_type == TC_PORT_TBT)
+		return;
+
+	intel_ddi_set_fia_lane_count(encoder, pipe_config, port);
+}
+
 void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp)
 {
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
@@ -3828,6 +3875,8 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
 	intel_encoder->enable = intel_enable_ddi;
 	if (IS_GEN9_LP(dev_priv))
 		intel_encoder->pre_pll_enable = bxt_ddi_pre_pll_enable;
+	if (IS_ICELAKE(dev_priv))
+		intel_encoder->pre_pll_enable = icl_ddi_pre_pll_enable;
 	intel_encoder->pre_enable = intel_ddi_pre_enable;
 	intel_encoder->disable = intel_disable_ddi;
 	intel_encoder->post_disable = intel_ddi_post_disable;
Signature · 6 lines
2.18.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author Applied
#3 lore raw

Re: [PATCH v2 2/2] drm/i915/ICL: Add pre_pll_enable hook for ICL and set DFLEXDPMLE in this hook

In reply to Manasi Navare

Pushed to dinq, thanks for the patch and reviews

Manasi

Quoted 91 lines · Manasi Navare

In case of Legacy DP connector on TypeC port, the
flex IO DPMLE register is set to number of lanes configured by the display driver which will be programmed into DDI_BUF_CTL PORT_WIDTH_SELECTION.
This needs to be programmed before enabling the shared PLLs hence add a pre_pll_enable hook for ICL and add this programming in that hook.

v2:
* Remove the check for combophy port (Jose)
* Simplify the port reversal check logic (Jose)

Cc Lucas De Marchi <[email protected]>
Cc Jose Roberto de Souza <[email protected]>
Cc Animesh Manna <[email protected]>
Cc Paulo Zanoni <[email protected]>
---
 drivers/gpu/drm/i915/intel_ddi.c | 49 ++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
drivers/gpu/drm/i915/intel_ddi.c +49 -0
index 6b9742baa5f2..246424605768 100644
@@ -3311,6 +3311,53 @@ static void bxt_ddi_pre_pll_enable(struct intel_encoder *encoder,
 	bxt_ddi_phy_set_lane_optim_mask(encoder, mask);
 }
 
+static void intel_ddi_set_fia_lane_count(struct intel_encoder *encoder,
+					 const struct intel_crtc_state *pipe_config,
+					 enum port port)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
+	enum tc_port tc_port = intel_port_to_tc(dev_priv, port);
+	u32 val = I915_READ(PORT_TX_DFLEXDPMLE1);
+	bool lane_reversal = dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
+
+	val &= ~DFLEXDPMLE1_DPMLETC_MASK(tc_port);
+	switch (pipe_config->lane_count) {
+	case 1:
+		val |= (lane_reversal) ? DFLEXDPMLE1_DPMLETC_ML3(tc_port) :
+		DFLEXDPMLE1_DPMLETC_ML0(tc_port);
+		break;
+	case 2:
+		val |= (lane_reversal) ? DFLEXDPMLE1_DPMLETC_ML3_2(tc_port) :
+		DFLEXDPMLE1_DPMLETC_ML1_0(tc_port);
+		break;
+	case 4:
+		val |= DFLEXDPMLE1_DPMLETC_ML3_0(tc_port);
+		break;
+	default:
+		MISSING_CASE(pipe_config->lane_count);
+	}
+	I915_WRITE(PORT_TX_DFLEXDPMLE1, val);
+}
+
+static void icl_ddi_pre_pll_enable(struct intel_encoder *encoder,
+				   const struct intel_crtc_state *pipe_config,
+				   const struct drm_connector_state *conn_state)
+{
+	enum port port = encoder->port;
+	struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
+
+	/*
+	 * Program the lane count for static/dynamic connections on Type-C ports.
+	 * Skip this step for TBT.
+	 */
+	if (dig_port->tc_type == TC_PORT_UNKNOWN ||
+	    dig_port->tc_type == TC_PORT_TBT)
+		return;
+
+	intel_ddi_set_fia_lane_count(encoder, pipe_config, port);
+}
+
 void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp)
 {
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
@@ -3828,6 +3875,8 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
 	intel_encoder->enable = intel_enable_ddi;
 	if (IS_GEN9_LP(dev_priv))
 		intel_encoder->pre_pll_enable = bxt_ddi_pre_pll_enable;
+	if (IS_ICELAKE(dev_priv))
+		intel_encoder->pre_pll_enable = icl_ddi_pre_pll_enable;
 	intel_encoder->pre_enable = intel_ddi_pre_enable;
 	intel_encoder->disable = intel_disable_ddi;
 	intel_encoder->post_disable = intel_ddi_post_disable;
Signature · 1 line
2.18.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#4 lore raw

✓ Fi.CI.BAT: success for series starting with [v2,1/2] drm/i915/icl: Fix the macros for DFLEXDPMLE register bits

In reply to Manasi Navare
== Series Details ==

== Series Details ==

Series: series starting with [v2,1/2] drm/i915/icl: Fix the macros for DFLEXDPMLE register bits
URL : https://patchwork.freedesktop.org/series/51402/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_5023 -> Patchwork_10551 =

== Summary - SUCCESS ==

No regressions found.

External URL: https://patchwork.freedesktop.org/api/1.0/series/51402/revisions/1/mbox/

== Known issues ==

Here are the changes found in Patchwork_10551 that come from known issues:

=== IGT changes ===

    ==== Issues hit ====

    igt@drv_selftest@live_contexts:
      fi-icl-u:           NOTRUN -> INCOMPLETE (fdo#106702)

    igt@kms_pipe_crc_basic@nonblocking-crc-pipe-a-frame-sequence:
      fi-byt-clapper:     PASS -> FAIL (fdo#107362, fdo#103191)

    
    ==== Possible fixes ====

    igt@gem_ctx_switch@basic-default:
      fi-icl-u:           DMESG-FAIL -> PASS

    igt@gem_exec_suspend@basic-s3:
      fi-blb-e6850:       INCOMPLETE (fdo#107718) -> PASS

    igt@kms_pipe_crc_basic@read-crc-pipe-a:
      fi-byt-clapper:     FAIL (fdo#107362) -> PASS

fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fdo#106702 https://bugs.freedesktop.org/show_bug.cgi?id=106702
fdo#107362 https://bugs.freedesktop.org/show_bug.cgi?id=107362
fdo#107718 https://bugs.freedesktop.org/show_bug.cgi?id=107718

== Participating hosts (49 -> 44) ==

Additional (1): fi-kbl-7560u
Missing (6): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-apl-guc fi-ctg-p8600

== Build changes ==

* Linux: CI_DRM_5023 -> Patchwork_10551

CI_DRM_5023: 166bc98d7b77005943ab670506f164783cdc3f56 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4688: fa6dbf8c048961356fd642df047cb58ab49309b2 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10551: 3067c0c9d032baa888fac49b66bafc2a5822c609 @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

3067c0c9d032 drm/i915/ICL: Add pre_pll_enable hook for ICL and set DFLEXDPMLE in this hook ea229a56b834 drm/i915/icl: Fix the macros for DFLEXDPMLE register bits

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10551/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#5 lore raw

✓ Fi.CI.IGT: success for series starting with [v2,1/2] drm/i915/icl: Fix the macros for DFLEXDPMLE register bits

In reply to Manasi Navare
== Series Details ==

== Series Details ==

Series: series starting with [v2,1/2] drm/i915/icl: Fix the macros for DFLEXDPMLE register bits
URL : https://patchwork.freedesktop.org/series/51402/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_5023_full -> Patchwork_10551_full =

== Summary - WARNING ==

Minor unknown changes coming with Patchwork_10551_full need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_10551_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

== Possible new issues ==

Here are the unknown changes that may have been introduced in Patchwork_10551_full:

=== IGT changes ===

    ==== Warnings ====

    igt@pm_rc6_residency@rc6-accuracy:
      shard-snb:          PASS -> SKIP

== Known issues ==

Here are the changes found in Patchwork_10551_full that come from known issues:

=== IGT changes ===

    ==== Issues hit ====

    igt@gem_exec_await@wide-contexts:
      shard-apl:          PASS -> FAIL (fdo#106680)

    igt@gem_render_copy@linear:
      shard-kbl:          PASS -> INCOMPLETE (fdo#103665)

    igt@kms_busy@extended-pageflip-hang-newfb-render-b:
      shard-apl:          NOTRUN -> DMESG-WARN (fdo#107956)

    igt@kms_busy@extended-pageflip-modeset-hang-oldfb-render-b:
      shard-snb:          NOTRUN -> DMESG-WARN (fdo#107956)

    igt@kms_color@pipe-b-degamma:
      shard-apl:          PASS -> FAIL (fdo#104782)

    igt@kms_cursor_crc@cursor-128x128-suspend:
      shard-apl:          PASS -> FAIL (fdo#103232, fdo#103191)

    igt@kms_cursor_crc@cursor-256x85-onscreen:
      shard-glk:          PASS -> FAIL (fdo#103232) +2

    igt@kms_cursor_crc@cursor-256x85-random:
      shard-apl:          PASS -> FAIL (fdo#103232) +3

    igt@kms_flip_tiling@flip-changes-tiling:
      shard-kbl:          PASS -> DMESG-WARN (fdo#103313, fdo#105345)

    igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-onoff:
      shard-apl:          PASS -> FAIL (fdo#103167)

    igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-pri-indfb-draw-blt:
      shard-glk:          PASS -> FAIL (fdo#103167) +4

    igt@kms_frontbuffer_tracking@psr-suspend:
      shard-skl:          PASS -> INCOMPLETE (fdo#106978, fdo#104108)

    igt@kms_plane@plane-position-covered-pipe-a-planes:
      shard-glk:          PASS -> FAIL (fdo#103166) +2

    igt@kms_plane_alpha_blend@pipe-b-constant-alpha-max:
      shard-glk:          PASS -> FAIL (fdo#108145)

    igt@kms_plane_alpha_blend@pipe-c-constant-alpha-max:
      shard-apl:          PASS -> FAIL (fdo#108145)

    igt@kms_setmode@basic:
      shard-apl:          PASS -> FAIL (fdo#99912)
      shard-snb:          NOTRUN -> FAIL (fdo#99912)

    
    ==== Possible fixes ====

    igt@kms_ccs@pipe-a-crc-sprite-planes-basic:
      shard-glk:          FAIL (fdo#108145) -> PASS +1

    igt@kms_cursor_crc@cursor-256x256-sliding:
      shard-glk:          FAIL (fdo#103232) -> PASS +1

    igt@kms_cursor_crc@cursor-64x21-offscreen:
      shard-skl:          FAIL (fdo#103232) -> PASS

    igt@kms_cursor_crc@cursor-size-change:
      shard-apl:          FAIL (fdo#103232) -> PASS

    igt@kms_cursor_legacy@cursora-vs-flipa-toggle:
      shard-glk:          DMESG-WARN (fdo#106538, fdo#105763) -> PASS +1

    igt@kms_draw_crc@draw-method-rgb565-mmap-cpu-xtiled:
      shard-skl:          FAIL (fdo#103184) -> PASS

    igt@kms_flip@busy-flip-interruptible:
      shard-skl:          FAIL (fdo#103257) -> PASS

    igt@kms_flip@flip-vs-expired-vblank-interruptible:
      shard-skl:          FAIL (fdo#105363) -> PASS

    igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-pwrite:
      shard-glk:          FAIL (fdo#103167) -> PASS

    igt@kms_frontbuffer_tracking@psr-rgb101010-draw-mmap-cpu:
      shard-skl:          FAIL (fdo#103167) -> PASS +1

    igt@kms_plane@plane-panning-bottom-right-suspend-pipe-b-planes:
      shard-skl:          INCOMPLETE (fdo#104108, fdo#107773) -> PASS

    igt@kms_plane@plane-position-covered-pipe-a-planes:
      shard-apl:          FAIL (fdo#103166) -> PASS

    igt@kms_rotation_crc@sprite-rotation-180:
      shard-apl:          INCOMPLETE (fdo#103927) -> PASS

    igt@perf@short-reads:
      shard-skl:          FAIL (fdo#103183) -> PASS

    igt@pm_rpm@legacy-planes-dpms:
      shard-skl:          INCOMPLETE (fdo#107807, fdo#105959) -> PASS

fdo#103166 https://bugs.freedesktop.org/show_bug.cgi?id=103166
fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
fdo#103183 https://bugs.freedesktop.org/show_bug.cgi?id=103183
fdo#103184 https://bugs.freedesktop.org/show_bug.cgi?id=103184
fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fdo#103232 https://bugs.freedesktop.org/show_bug.cgi?id=103232
fdo#103257 https://bugs.freedesktop.org/show_bug.cgi?id=103257
fdo#103313 https://bugs.freedesktop.org/show_bug.cgi?id=103313
fdo#103665 https://bugs.freedesktop.org/show_bug.cgi?id=103665
fdo#103927 https://bugs.freedesktop.org/show_bug.cgi?id=103927
fdo#104108 https://bugs.freedesktop.org/show_bug.cgi?id=104108
fdo#104782 https://bugs.freedesktop.org/show_bug.cgi?id=104782
fdo#105345 https://bugs.freedesktop.org/show_bug.cgi?id=105345
fdo#105363 https://bugs.freedesktop.org/show_bug.cgi?id=105363
fdo#105763 https://bugs.freedesktop.org/show_bug.cgi?id=105763
fdo#105959 https://bugs.freedesktop.org/show_bug.cgi?id=105959
fdo#106538 https://bugs.freedesktop.org/show_bug.cgi?id=106538
fdo#106680 https://bugs.freedesktop.org/show_bug.cgi?id=106680
fdo#106978 https://bugs.freedesktop.org/show_bug.cgi?id=106978
fdo#107773 https://bugs.freedesktop.org/show_bug.cgi?id=107773
fdo#107807 https://bugs.freedesktop.org/show_bug.cgi?id=107807
fdo#107956 https://bugs.freedesktop.org/show_bug.cgi?id=107956
fdo#108145 https://bugs.freedesktop.org/show_bug.cgi?id=108145
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912

== Participating hosts (6 -> 6) ==

No changes in participating hosts

== Build changes ==

* Linux: CI_DRM_5023 -> Patchwork_10551

CI_DRM_5023: 166bc98d7b77005943ab670506f164783cdc3f56 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4688: fa6dbf8c048961356fd642df047cb58ab49309b2 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10551: 3067c0c9d032baa888fac49b66bafc2a5822c609 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10551/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author Applied
#6 lore raw
In reply to Manasi Navare

Pushed to dinq,thanks for the patch and reviews.

Manasi

Quoted 35 lines · Manasi Navare

This patch fixes the macros used for defining the DFLEXDPMLE register bit fields. This accounts for changes in the spec.

Fixes a2bc69a1a9d6 ("drm/i915/icl: Add register definition for DFLEXDPMLE")
Cc Animesh Manna <[email protected]>
Cc Paulo Zanoni <[email protected]>
Cc Jose Roberto de Souza <[email protected]>
---
 drivers/gpu/drm/i915/i915_reg.h | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +6 -2
index 8bd61f946714..9da489b176c9 100644
@@ -2057,8 +2057,12 @@ enum i915_power_well_id {
 
 /* ICL PHY DFLEX registers */
 #define PORT_TX_DFLEXDPMLE1		_MMIO(0x1638C0)
-#define   DFLEXDPMLE1_DPMLETC_MASK(n)	(0xf << (4 * (n)))
-#define   DFLEXDPMLE1_DPMLETC(n, x)	((x) << (4 * (n)))
+#define   DFLEXDPMLE1_DPMLETC_MASK(tc_port)	(0xf << (4 * (tc_port)))
+#define   DFLEXDPMLE1_DPMLETC_ML0(tc_port)	(1 << (4 * (tc_port)))
+#define   DFLEXDPMLE1_DPMLETC_ML1_0(tc_port)	(3 << (4 * (tc_port)))
+#define   DFLEXDPMLE1_DPMLETC_ML3(tc_port)	(8 << (4 * (tc_port)))
+#define   DFLEXDPMLE1_DPMLETC_ML3_2(tc_port)	(12 << (4 * (tc_port)))
+#define   DFLEXDPMLE1_DPMLETC_ML3_0(tc_port)	(15 << (4 * (tc_port)))
 
 /* BXT PHY Ref registers */
 #define _PORT_REF_DW3_A			0x16218C
Signature · 1 line
2.18.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx