More fully implement ARM PMUv3
v7 cover More fully implement ARM PMUv3
The ARM PMU implementation currently contains a basic cycle counter, but it is often useful to gather counts of other events, filter them based on execution mode, and/or be notified on counter overflow. These patches flesh out the implementations of various PMU registers including PM[X]EVCNTR and PM[X]EVTYPER, add a struct definition to represent arbitrary counter types, implement mode filtering, send interrupts on counter overflow, and add instruction, cycle, and software increment events.
Since v6 [1] I have made the following changes:
* Use cpu_get_host_ticks() for the cycle counter value for user mode
* Re-staged "PMU: Set PMCR.N to 4" so that the value of the pmcrn local variable matches the architectural value of PMCR.N
* Re-ordered "Reorganize PMCCNTR accesses" to come first to eliminate the churn of *_op_start/finish function names and definitions
* Use extract64 and ARRAY_SIZE macros where applicable
* Add a return value to the post_save migration function
[1] - https://lists.gnu.org/archive/html/qemu-devel/2018-10/msg02036.html
Aaron Lindsay (12):
migration: Add post_save function to VMStateDescription target/arm: Reorganize PMCCNTR accesses
target/arm: Swap PMU values before/after migrations target/arm: Filter cycle counter based on PMCCFILTR_EL0 target/arm: Allow AArch32 access for PMCCFILTR target/arm: Implement PMOVSSET
target/arm: Add array for supported PMU events, generate PMCEID[01] target/arm: Finish implementation of PM[X]EVCNTR and PM[X]EVTYPER target/arm: PMU: Add instruction and cycle events target/arm: PMU: Set PMCR.N to 4
target/arm: Implement PMSWINC
target/arm: Send interrupts on PMU counter overflow
docs/devel/migration.rst | 9 +- include/migration/vmstate.h | 1 + migration/vmstate.c | 13 +- target/arm/cpu.c | 28 +- target/arm/cpu.h | 68 +++- target/arm/cpu64.c | 4 - target/arm/helper.c | 774 ++++++++++++++++++++++++++++++++---- target/arm/machine.c | 20 + 8 files changed, 816 insertions(+), 101 deletions(-)
Signature · 1 line
2.19.1
PATCH v7 1/12 migration: Add post_save function to VMStateDescription
In some cases it may be helpful to modify state before saving it for migration, and then modify the state back after it has been saved. The existing pre_save function provides half of this functionality. This patch adds a post_save function to provide the second half.
--- docs/devel/migration.rst | 9 +++++++-- include/migration/vmstate.h | 1 + migration/vmstate.c | 13 ++++++++++++- 3 files changed, 20 insertions(+), 3 deletions(-)
docs/devel/migration.rst +7 -2
@@ -419,8 +419,13 @@ The functions to do that are inside a vmstate definition, and are called: This function is called before we save the state of one device. -Example: You can look at hpet.c, that uses the three function to -massage the state that is transferred. +- ``int (*post_save)(void *opaque);`` + + This function is called after we save the state of one device + (even upon failure, unless the call to pre_save returned an error). + +Example: You can look at hpet.c, that uses the first three functions +to massage the state that is transferred. The ``VMSTATE_WITH_TMP`` macro may be useful when the migration data doesn't match the stored device data well; it allows an
include/migration/vmstate.h +1 -0
@@ -185,6 +185,7 @@ struct VMStateDescription {int (*pre_load)(void *opaque);int (*post_load)(void *opaque,int version_id);int (*pre_save)(void *opaque); +int (*post_save)(void *opaque);bool (*needed)(void *opaque);VMStateField *fields;const VMStateDescription **subsections;
migration/vmstate.c +12 -1
@@ -387,6 +387,9 @@ int vmstate_save_state_v(QEMUFile *f, const VMStateDescription *vmsd,if (ret) {error_report ("Save of field %s/%s failed" , vmsd->name, field->name); +if (vmsd->post_save) { + vmsd->post_save (opaque); + }return ret; }
@@ -412,7 +415,15 @@ int vmstate_save_state_v(QEMUFile *f, const VMStateDescription *vmsd,json_end_array (vmdesc); } -return vmstate_subsection_save (f, vmsd, opaque, vmdesc); + ret =vmstate_subsection_save (f, vmsd, opaque, vmdesc); + +if (vmsd->post_save) { +int ps_ret = vmsd->post_save (opaque); +if (!ret) { + ret = ps_ret; + } + } +return ret; } static const VMStateDescription *
Signature · 1 line
2.19.1
Re: [Qemu-arm] [PATCH v7 01/12] migration: Add post_save function to VMStateDescription
Quoted 8 lines · Aaron Lindsay
In some cases it may be helpful to modify state before saving it for migration, and then modify the state back after it has been saved. The existing
pre_savefunction provides half of this functionality. This patch adds apost_savefunction to provide the second half.Signed-off-by Aaron Lindsay <[email protected]>Cc Dr. David Alan Gilbert <[email protected]>---
David: do you want to provide a reviewed-by/acked-by for the migration vmstate API change ?
thanks
-- PMM
Dr. David Alan Gilbert
Reviewed-byRe: [Qemu-arm] [PATCH v7 01/12] migration: Add post_save function to VMStateDescription
Quoted 6 lines · * Peter Maydell ([email protected]) wrote:
Quoted 5 lines · Aaron Lindsay
In some cases it may be helpful to modify state before saving it for migration, and then modify the state back after it has been saved. The existing
pre_savefunction provides half of this functionality. This patch adds apost_savefunction to provide the second half.
Quoted 8 lines
Quoted 3 lines
Signed-off-by Aaron Lindsay <[email protected]>Cc Dr. David Alan Gilbert <[email protected]>---
Reviewed-by Peter Maydell <[email protected]>David: do you want to provide a reviewed-by/acked-by for the migration vmstate API change ?
Yep, it's much more symmetric now:
Quoted 2 lines
thanks
-- PMM
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
PATCH v7 2/12 target/arm: Reorganize PMCCNTR accesses
In reply to Aaron Lindsaypmccntr_read and pmccntr_write contained duplicate code that was already being handled by pmccntr_sync. Consolidate the duplicated code into two
functions: pmccntr_op_start and pmccntr_op_finish. Add a companion to c15_ccnt in CPUARMState so that we can simultaneously save both the architectural register value and the last underlying cycle count - this ensures time isn't lost and will also allow us to access the 'old' architectural register value in order to detect overflows in later patches.
--- target/arm/cpu.h | 38 +++++++++++---- target/arm/helper.c | 114 +++++++++++++++++++++++++++----------------- 2 files changed, 99 insertions(+), 53 deletions(-)
target/arm/cpu.h +30 -8
@@ -468,10 +468,20 @@ typedef struct CPUARMState {uint64_t oslsr_el1;/* OS Lock Status */ uint64_t mdcr_el2;uint64_t mdcr_el3; -/* If the counter is enabled, this stores the last time the counter -* was reset. Otherwise it stores the counter value +/* Stores the architectural value of the counter *the last time it was +* updated* by pmccntr_op_start. Accesses should always be surrounded +* by pmccntr_op_start/pmccntr_op_finish to guarantee the latest +* architecturally-correct value is being read/set. */ uint64_t c15_ccnt; +/* Stores the delta between the architectural value and the underlying +* cycle count during normal operation. It is used to update c15_ccnt +* to be the correct architectural value before accesses. During +* accesses, c15_ccnt_delta contains the underlying count being used +* for the access, after which it reverts to the delta value in +* pmccntr_op_finish. +*/ +uint64_t c15_ccnt_delta;uint64_t pmccfiltr_el0;/* Performance Monitor Filter Register */ uint64_t vpidr_el2;/* Virtualization Processor ID Register */ uint64_t vmpidr_el2;/* Virtualization Multiprocessor ID Register */
@@ -953,15 +963,27 @@ int cpu_arm_signal_handler(int host_signum, void *pinfo, void *puc);/** -* pmccntr_sync +* pmccntr_op_start/finish +* @env: CPUARMState +* +* Convert the counter in the PMCCNTR between its delta form (the typical mode +* when it's enabled) and the guest-visible value. These two calls must always +* surround any action which might affect the counter. +*/ +void pmccntr_op_start (CPUARMState *env); +void pmccntr_op_finish (CPUARMState *env); + +/** +* pmu_op_start/finish * @env: CPUARMState * -* Synchronises the counter in the PMCCNTR. This must always be called twice, -* once before any action that might affect the timer and again afterwards. -* The function is used to swap the state of the register if required. -* This only happens when not in user mode (!CONFIG_USER_ONLY) +* Convert all PMU counters between their delta form (the typical mode when +* they are enabled) and the guest-visible values. These two calls must +* surround any action which might affect the counters, and the return value +* from pmu_op_start must be supplied as the second argument to pmu_op_finish. */ -void pmccntr_sync (CPUARMState *env); +void pmu_op_start (CPUARMState *env); +void pmu_op_finish (CPUARMState *env);/* SCTLR bit meanings. Several bits have been reused in newer * versions of the architecture; in that case we define constants
target/arm/helper.c +69 -45
161 lines not on this page · raw message
Signature · 1 line
2.19.1
Re: [Qemu-arm] [PATCH v7 02/12] target/arm: Reorganize PMCCNTR accesses
Quoted 31 lines · Aaron Lindsay
pmccntr_readandpmccntr_writecontained duplicate code that was already being handled bypmccntr_sync. Consolidate the duplicated code into two
functions:pmccntr_op_startandpmccntr_op_finish. Add a companion toc15_ccntin CPUARMState so that we can simultaneously save both the architectural register value and the last underlying cycle count - this ensures time isn't lost and will also allow us to access the 'old' architectural register value in order to detect overflows in later patches.Signed-off-by Aaron Lindsay <[email protected]>Signed-off-by Aaron Lindsay <[email protected]>/**
- *pmccntr_sync
+ * pmccntr_op_start/finish
+ * @env: CPUARMState
+ *
+ * Convert the counter in the PMCCNTR between its delta form (the typical mode
+ * when it's enabled) and the guest-visible value. These two calls must always
+ * surround any action which might affect the counter.
+ */target/arm/cpu.h +5
-2+void pmccntr_op_start (CPUARMState *env); +void pmccntr_op_finish (CPUARMState *env); + +/** +* pmu_op_start/finish * @env: CPUARMState * -* Synchronises the counter in the PMCCNTR. This must always be called twice, -* once before any action that might affect the timer and again afterwards.
target/arm/cpu.h int cpu_arm_signal_handler(int host_signum, void *pinfo, · line 986
Quoted 10 lines
target/arm/cpu.h +6
-3-* The function is used to swap the state of the register if required. -* This only happens when not in user mode (!CONFIG_USER_ONLY) +* Convert all PMU counters between their delta form (the typical mode when +* they are enabled) and the guest-visible values. These two calls must +* surround any action which might affect the counters, and the return value +* from pmu_op_start must be supplied as the second argument to pmu_op_finish. */ -void pmccntr_sync (CPUARMState *env); +void pmu_op_start (CPUARMState *env); +void pmu_op_finish (CPUARMState *env);
The comment says that pmu_op_start returns a value and pmu_op_finish has a second argument, but the prototypes disagree...
Otherwise
so if this turns out to be the only problem I can fix it up when I apply it to my tree, if you provide suitable new comment text.
thanks
-- PMM
Re: [Qemu-arm] [PATCH v7 02/12] target/arm: Reorganize PMCCNTR accesses
Quoted 37 lines · Peter Maydell
Quoted 36 lines · Aaron Lindsay
pmccntr_readandpmccntr_writecontained duplicate code that was already being handled bypmccntr_sync. Consolidate the duplicated code into two
functions:pmccntr_op_startandpmccntr_op_finish. Add a companion toc15_ccntin CPUARMState so that we can simultaneously save both the architectural register value and the last underlying cycle count - this ensures time isn't lost and will also allow us to access the 'old' architectural register value in order to detect overflows in later patches.Signed-off-by Aaron Lindsay <[email protected]>Signed-off-by Aaron Lindsay <[email protected]>/**
- *pmccntr_sync
+ * pmccntr_op_start/finish
+ * @env: CPUARMState
+ *
+ * Convert the counter in the PMCCNTR between its delta form (the typical mode
+ * when it's enabled) and the guest-visible value. These two calls must always
+ * surround any action which might affect the counter.
+ */target/arm/cpu.h +8
-4+void pmccntr_op_start (CPUARMState *env); +void pmccntr_op_finish (CPUARMState *env); + +/** +* pmu_op_start/finish * @env: CPUARMState * -* Synchronises the counter in the PMCCNTR. This must always be called twice, -* once before any action that might affect the timer and again afterwards. -* The function is used to swap the state of the register if required. -* This only happens when not in user mode (!CONFIG_USER_ONLY) +* Convert all PMU counters between their delta form (the typical mode when +* they are enabled) and the guest-visible values. These two calls must +* surround any action which might affect the counters, and the return value
Quoted 8 lines
target/arm/cpu.h int cpu_arm_signal_handler(int host_signum, void *pinfo, · line 986
Quoted 5 lines
+ * from
pmu_op_startmust be supplied as the second argument topmu_op_finish. */target/arm/cpu.h +2
-1-void pmccntr_sync (CPUARMState *env); +void pmu_op_start (CPUARMState *env); +void pmu_op_finish (CPUARMState *env);The comment says that
pmu_op_startreturns a value andpmu_op_finishhas a second argument, but the prototypes disagree...
Doh, I updated the comment for pmccntr_op_* but missed pmu_op_*. The last sentence should end after the comma:
Quoted 9 lines
Quoted 4 lines
+ * Convert all PMU counters between their delta form (the typical mode when
+ * they are enabled) and the guest-visible values. These two calls must
+ * surround any action which might affect the counters.
*/Otherwise
Reviewed-by Peter Maydell <[email protected]>so if this turns out to be the only problem I can fix it up when I apply it to my tree, if you provide suitable new comment text.
I've also updated the comment text in my tree, so if/when there is a v8 of this patchset, it won't be lost.
-Aaron
PATCH v7 3/12 target/arm: Swap PMU values before/after migrations
In reply to Aaron LindsayBecause of the PMU's design, many register accesses have side effects which are inter-related, meaning that the normal method of saving CP registers can result in inconsistent state. These side-effects are largely handled in pmu_op_start/finish functions which can be called before and after the state is saved/restored. By doing this and adding raw read/write functions for the affected registers, we avoid migration-related inconsistencies.
--- target/arm/helper.c | 6 ++++-- target/arm/machine.c | 20 ++++++++++++++++++++ 2 files changed, 24 insertions(+), 2 deletions(-)
target/arm/helper.c +4 -2
@@ -1450,11 +1450,13 @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 0, .access = PL0_RW, .accessfn = pmreg_access_ccntr, .type = ARM_CP_IO, - .readfn = pmccntr_read, .writefn = pmccntr_write, }, + .fieldoffset = offsetof(CPUARMState, cp15.c15_ccnt), + .readfn = pmccntr_read, .writefn = pmccntr_write, + .raw_readfn = raw_read, .raw_writefn = raw_write, },#endif { .name = "PMCCFILTR_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 15, .opc2 = 7, - .writefn = pmccfiltr_write, + .writefn = pmccfiltr_write, .raw_writefn = raw_write, .access = PL0_RW, .accessfn = pmreg_access, .type = ARM_CP_IO, .fieldoffset = offsetof(CPUARMState, cp15.pmccfiltr_el0),
target/arm/machine.c +20 -0
@@ -604,6 +604,8 @@ static int cpu_pre_save(void *opaque) {ARMCPU *cpu = opaque; +pmu_op_start (&cpu->env); +if (kvm_enabled ()) {if (!write_kvmstate_to_list (cpu)) {/* This should never fail */
@@ -625,6 +627,20 @@ static int cpu_pre_save(void *opaque)return 0 ; } +static int cpu_post_save (void *opaque) +{ +ARMCPU *cpu = opaque; +pmu_op_finish (&cpu->env); +return 0 ; +} + +static int cpu_pre_load (void *opaque) +{ +ARMCPU *cpu = opaque; +pmu_op_start (&cpu->env); +return 0 ; +} +static int cpu_post_load (void *opaque,int version_id) {ARMCPU *cpu = opaque;
@@ -672,6 +688,8 @@ static int cpu_post_load(void *opaque, int version_id)hw_breakpoint_update_all (cpu);hw_watchpoint_update_all (cpu); +pmu_op_finish (&cpu->env); +return 0 ; }
@@ -680,6 +698,8 @@ const VMStateDescription vmstate_arm_cpu = { .version_id = 22, .minimum_version_id = 22, .pre_save = cpu_pre_save, + .post_save = cpu_post_save, + .pre_load = cpu_pre_load, .post_load = cpu_post_load, .fields = (VMStateField []) {VMSTATE_UINT32_ARRAY (env.regs,ARMCPU ,16 ),
Signature · 1 line
2.19.1
Re: [Qemu-arm] [PATCH v7 03/12] target/arm: Swap PMU values before/after migrations
Quoted 43 lines · Aaron Lindsay
Because of the PMU's design, many register accesses have side effects which are inter-related, meaning that the normal method of saving CP registers can result in inconsistent state. These side-effects are largely handled in pmu_op_start/finish functions which can be called before and after the state is saved/restored. By doing this and adding raw read/write functions for the affected registers, we avoid migration-related inconsistencies.
Signed-off-by Aaron Lindsay <[email protected]>target/arm/machine.c +16
-0@@ -604,6 +604,8 @@ static int cpu_pre_save(void *opaque) {ARMCPU *cpu = opaque; +pmu_op_start (&cpu->env); +if (kvm_enabled ()) {if (!write_kvmstate_to_list (cpu)) {/* This should never fail */ @@ -625,6 +627,20 @@ static int cpu_pre_save(void *opaque)return 0 ; } +static int cpu_post_save (void *opaque) +{ +ARMCPU *cpu = opaque; +pmu_op_finish (&cpu->env); +return 0 ; +} + +static int cpu_pre_load (void *opaque) +{ +ARMCPU *cpu = opaque; +pmu_op_start (&cpu->env); +return 0 ; +} +static int cpu_post_load (void *opaque,int version_id) {ARMCPU *cpu = opaque;
target/arm/machine.c static int cpu_post_load(void *opaque, int version_id) · line 694
Quoted 7 lines
target/arm/machine.c +2
-0@@ -672,6 +688,8 @@ static int cpu_post_load(void *opaque, int version_id)hw_breakpoint_update_all (cpu);hw_watchpoint_update_all (cpu); +pmu_op_finish (&cpu->env); +return 0 ; }
This will end up calling pmu_op_start() and pmu_op_finish() even if the guest is running KVM and we're not using the TCG code. Is that what you intended?
thanks
-- PMM
Re: [Qemu-arm] [PATCH v7 03/12] target/arm: Swap PMU values before/after migrations
Quoted 47 lines · Peter Maydell
Quoted 46 lines · Aaron Lindsay
Because of the PMU's design, many register accesses have side effects which are inter-related, meaning that the normal method of saving CP registers can result in inconsistent state. These side-effects are largely handled in pmu_op_start/finish functions which can be called before and after the state is saved/restored. By doing this and adding raw read/write functions for the affected registers, we avoid migration-related inconsistencies.
Signed-off-by Aaron Lindsay <[email protected]>target/arm/machine.c +16
-0@@ -604,6 +604,8 @@ static int cpu_pre_save(void *opaque) {ARMCPU *cpu = opaque; +pmu_op_start (&cpu->env); +if (kvm_enabled ()) {if (!write_kvmstate_to_list (cpu)) {/* This should never fail */ @@ -625,6 +627,20 @@ static int cpu_pre_save(void *opaque)return 0 ; } +static int cpu_post_save (void *opaque) +{ +ARMCPU *cpu = opaque; +pmu_op_finish (&cpu->env); +return 0 ; +} + +static int cpu_pre_load (void *opaque) +{ +ARMCPU *cpu = opaque; +pmu_op_start (&cpu->env); +return 0 ; +} +static int cpu_post_load (void *opaque,int version_id) {ARMCPU *cpu = opaque;@@ -672,6 +688,8 @@ static int cpu_post_load(void *opaque, int version_id)hw_breakpoint_update_all (cpu);hw_watchpoint_update_all (cpu);
Quoted 8 lines
target/arm/machine.c static int cpu_post_load(void *opaque, int version_id) · line 694
Quoted 4 lines
target/arm/machine.c +2
-0+pmu_op_finish (&cpu->env); +return 0 ; }This will end up calling
pmu_op_start()andpmu_op_finish()even if the guest is running KVM and we're not using the TCG code. Is that what you intended?
The counters are still stored in their 'difference' format for KVM, so I think this still makes sense. Or is there something I'm missing about how this will interact with KVM? I'm much more familiar with TCG.
-Aaron
Re: [Qemu-arm] [PATCH v7 03/12] target/arm: Swap PMU values before/after migrations
Quoted 57 lines · Aaron Lindsay
Quoted 47 lines · Peter Maydell
Quoted 46 lines · Aaron Lindsay
Because of the PMU's design, many register accesses have side effects which are inter-related, meaning that the normal method of saving CP registers can result in inconsistent state. These side-effects are largely handled in pmu_op_start/finish functions which can be called before and after the state is saved/restored. By doing this and adding raw read/write functions for the affected registers, we avoid migration-related inconsistencies.
Signed-off-by Aaron Lindsay <[email protected]>target/arm/machine.c +16
-0@@ -604,6 +604,8 @@ static int cpu_pre_save(void *opaque) {ARMCPU *cpu = opaque; +pmu_op_start (&cpu->env); +if (kvm_enabled ()) {if (!write_kvmstate_to_list (cpu)) {/* This should never fail */ @@ -625,6 +627,20 @@ static int cpu_pre_save(void *opaque)return 0 ; } +static int cpu_post_save (void *opaque) +{ +ARMCPU *cpu = opaque; +pmu_op_finish (&cpu->env); +return 0 ; +} + +static int cpu_pre_load (void *opaque) +{ +ARMCPU *cpu = opaque; +pmu_op_start (&cpu->env); +return 0 ; +} +static int cpu_post_load (void *opaque,int version_id) {ARMCPU *cpu = opaque;@@ -672,6 +688,8 @@ static int cpu_post_load(void *opaque, int version_id)hw_breakpoint_update_all (cpu);hw_watchpoint_update_all (cpu);Quoted 8 lines
target/arm/machine.c static int cpu_post_load(void *opaque, int version_id) · line 694
Quoted 4 lines
target/arm/machine.c +2
-0+pmu_op_finish (&cpu->env); +return 0 ; }This will end up calling
pmu_op_start()andpmu_op_finish()even if the guest is running KVM and we're not using the TCG code. Is that what you intended?
Quoted 3 lines
The counters are still stored in their 'difference' format for KVM, so I think this still makes sense. Or is there something I'm missing about how this will interact with KVM? I'm much more familiar with TCG.
For KVM the counter values are stored in the kernel, until the write_kvmstate_to_list() function (which is performed after your pmu_op_start() call in cpu_pre_save()) writes them from the kernel into the cpreg_vmstate array. Similarly on load they go straight from the vmstate array into the kernel registers. It's not clear to me what the pmu_op_start()/finish() calls are intended to do in the KVM case, and they look at fields in the env->cp15 struct which will not have valid values at this point.
thanks
-- PMM
Re: [Qemu-arm] [PATCH v7 03/12] target/arm: Swap PMU values before/after migrations
Quoted 63 lines · Peter Maydell
Quoted 57 lines · Aaron Lindsay
Quoted 47 lines · Peter Maydell
Quoted 46 lines · Aaron Lindsay
Because of the PMU's design, many register accesses have side effects which are inter-related, meaning that the normal method of saving CP registers can result in inconsistent state. These side-effects are largely handled in pmu_op_start/finish functions which can be called before and after the state is saved/restored. By doing this and adding raw read/write functions for the affected registers, we avoid migration-related inconsistencies.
Signed-off-by Aaron Lindsay <[email protected]>target/arm/machine.c +16
-0@@ -604,6 +604,8 @@ static int cpu_pre_save(void *opaque) {ARMCPU *cpu = opaque; +pmu_op_start (&cpu->env); +if (kvm_enabled ()) {if (!write_kvmstate_to_list (cpu)) {/* This should never fail */ @@ -625,6 +627,20 @@ static int cpu_pre_save(void *opaque)return 0 ; } +static int cpu_post_save (void *opaque) +{ +ARMCPU *cpu = opaque; +pmu_op_finish (&cpu->env); +return 0 ; +} + +static int cpu_pre_load (void *opaque) +{ +ARMCPU *cpu = opaque; +pmu_op_start (&cpu->env); +return 0 ; +} +static int cpu_post_load (void *opaque,int version_id) {ARMCPU *cpu = opaque;@@ -672,6 +688,8 @@ static int cpu_post_load(void *opaque, int version_id)hw_breakpoint_update_all (cpu);hw_watchpoint_update_all (cpu);Quoted 8 lines
target/arm/machine.c static int cpu_post_load(void *opaque, int version_id) · line 694
Quoted 4 lines
target/arm/machine.c +2
-0+pmu_op_finish (&cpu->env); +return 0 ; }This will end up calling
pmu_op_start()andpmu_op_finish()even if the guest is running KVM and we're not using the TCG code. Is that what you intended?Quoted 3 lines
The counters are still stored in their 'difference' format for KVM, so I think this still makes sense. Or is there something I'm missing about how this will interact with KVM? I'm much more familiar with TCG.
Quoted 9 lines
For KVM the counter values are stored in the kernel, until the
write_kvmstate_to_list()function (which is performed after yourpmu_op_start()call incpu_pre_save()) writes them from the kernel into thecpreg_vmstatearray. Similarly on load they go straight from the vmstate array into the kernel registers. It's not clear to me what the pmu_op_start()/finish() calls are intended to do in the KVM case, and they look at fields in theenv->cp15struct which will not have valid values at this point.
Oh, I had a fundamental misunderstanding and expected the registers would be in env->cp15 when this was called, even for KVM.
After looking into this more, it seems like my pmu_op_* calls here should be contained in if (!kvm_enabled()) blocks. It doesn't seem like anything bad would happen otherwise, but it also isn't necessary or helpful to make those calls.
I'll make this change for v8 if you don't have further feedback.
-Aaron
PATCH v7 4/12 target/arm: Filter cycle counter based on PMCCFILTR_EL0
In reply to Aaron LindsayRename arm_ccnt_enabled to pmu_counter_enabled, and add logic to only return 'true' if the specified counter is enabled and neither prohibited or filtered.
--- target/arm/cpu.c | 3 ++ target/arm/cpu.h | 10 ++++- target/arm/helper.c | 96 +++++++++++++++++++++++++++++++++++++++++---- 3 files changed, 101 insertions(+), 8 deletions(-)
target/arm/cpu.c +3 -0
@@ -957,6 +957,9 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)if (!cpu->has_pmu) {unset_feature (env,ARM_FEATURE_PMU ); cpu->id_aa64dfr0 &= ~0xf00 ; + }else if (!kvm_enabled ()) { +arm_register_pre_el_change_hook (cpu, &pmu_pre_el_change,0 ); +arm_register_el_change_hook (cpu, &pmu_post_el_change,0 ); }if (!arm_feature (env,ARM_FEATURE_EL2 )) {
target/arm/cpu.h +9 -1
@@ -985,6 +985,12 @@ void pmccntr_op_finish(CPUARMState *env);void pmu_op_start (CPUARMState *env);void pmu_op_finish (CPUARMState *env); +/** +* Functions to register as EL change hooks for PMU mode filtering +*/ +void pmu_pre_el_change (ARMCPU *cpu,void *ignored); +void pmu_post_el_change (ARMCPU *cpu,void *ignored); +/* SCTLR bit meanings. Several bits have been reused in newer * versions of the architecture; in that case we define constants * for both old and new bit meanings. Code which tests against those
@@ -1046,7 +1052,8 @@ void pmu_op_finish(CPUARMState *env);#define MDCR_EPMAD (1U << 21)#define MDCR_EDAD (1U << 20) -#define MDCR_SPME (1U << 17) +#define MDCR_SPME (1U << 17)/* MDCR_EL3 */ +#define MDCR_HPMD (1U << 17)/* MDCR_EL2 */ #define MDCR_SDD (1U << 16)#define MDCR_SPD (3U << 14)#define MDCR_TDRA (1U << 11)
@@ -1056,6 +1063,7 @@ void pmu_op_finish(CPUARMState *env);#define MDCR_HPME (1U << 7)#define MDCR_TPM (1U << 6)#define MDCR_TPMCR (1U << 5) +#define MDCR_HPMN (0x1fU)/* Not all of the MDCR_EL3 bits are present in the 32-bit SDCR */ #define SDCR_VALID_MASK (MDCR_EPMAD | MDCR_EDAD | MDCR_SPME | MDCR_SPD)
target/arm/helper.c +89 -7
141 lines not on this page · raw message
Signature · 1 line
2.19.1
PATCH v7 5/12 target/arm: Allow AArch32 access for PMCCFILTR
In reply to Aaron Lindsay--- target/arm/helper.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)
target/arm/helper.c +26 -1
@@ -994,6 +994,10 @@ static const ARMCPRegInfo v6_cp_reginfo[] = { PMXEVTYPER_M | PMXEVTYPER_MT | \ PMXEVTYPER_EVTCOUNT) +#define PMCCFILTR 0xf8000000 +#define PMCCFILTR_M PMXEVTYPER_M +#define PMCCFILTR_EL0 (PMCCFILTR | PMCCFILTR_M) +static inline uint32_t pmu_num_counters (CPUARMState *env) {return (env->cp15.c9_pmcr &PMCRN_MASK ) >>PMCRN_SHIFT ;
@@ -1297,10 +1301,26 @@ static void pmccfiltr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) {pmccntr_op_start (env); - env->cp15.pmccfiltr_el0 = value &0xfc000000 ; + env->cp15.pmccfiltr_el0 = value &PMCCFILTR_EL0 ; +pmccntr_op_finish (env); +} + +static void pmccfiltr_write_a32 (CPUARMState *env,const ARMCPRegInfo *ri, +uint64_t value) +{ +pmccntr_op_start (env); +/* M is not accessible from AArch32 */ + env->cp15.pmccfiltr_el0 = (env->cp15.pmccfiltr_el0 &PMCCFILTR_M ) | + (value &PMCCFILTR );pmccntr_op_finish (env); } +static uint64_t pmccfiltr_read_a32 (CPUARMState *env,const ARMCPRegInfo *ri) +{ +/* M is not visible in AArch32 */ +return env->cp15.pmccfiltr_el0 &PMCCFILTR ; +} +static void pmcntenset_write (CPUARMState *env,const ARMCPRegInfo *ri,uint64_t value) {
@@ -1536,6 +1556,11 @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .readfn = pmccntr_read, .writefn = pmccntr_write, .raw_readfn = raw_read, .raw_writefn = raw_write, },#endif + { .name = "PMCCFILTR", .cp = 15, .opc1 = 0, .crn = 14, .crm = 15, .opc2 = 7, + .writefn = pmccfiltr_write_a32, .readfn = pmccfiltr_read_a32, + .access = PL0_RW, .accessfn = pmreg_access, + .type = ARM_CP_ALIAS | ARM_CP_IO, + .resetvalue = 0, }, { .name = "PMCCFILTR_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 15, .opc2 = 7, .writefn = pmccfiltr_write, .raw_writefn = raw_write,
Signature · 1 line
2.19.1
PATCH v7 6/12 target/arm: Implement PMOVSSET
In reply to Aaron LindsayAdd an array for PMOVSSET so we only define it for v7ve+ platforms
--- target/arm/helper.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
target/arm/helper.c +28 -0
@@ -1342,6 +1342,13 @@ static void pmovsr_write(CPUARMState *env, const ARMCPRegInfo *ri, env->cp15.c9_pmovsr &= ~value; } +static void pmovsset_write (CPUARMState *env,const ARMCPRegInfo *ri, +uint64_t value) +{ + value &=pmu_counter_mask (env); + env->cp15.c9_pmovsr |= value; +} +static void pmxevtyper_write (CPUARMState *env,const ARMCPRegInfo *ri,uint64_t value) {
@@ -1709,6 +1716,24 @@ static const ARMCPRegInfo v7mp_cp_reginfo[] = {REGINFO_SENTINEL }; +static const ARMCPRegInfo pmovsset_cp_reginfo[] = { +/* PMOVSSET is not implemented in v7 before v7ve */ + { .name ="PMOVSSET" , .cp =15 , .opc1 =0 , .crn =9 , .crm =14 , .opc2 =3 , + .access =PL0_RW , .accessfn = pmreg_access, + .type =ARM_CP_ALIAS , + .fieldoffset =offsetoflow32 (CPUARMState, cp15.c9_pmovsr), + .writefn = pmovsset_write, + .raw_writefn = raw_write }, + { .name ="PMOVSSET_EL0" , .state =ARM_CP_STATE_AA64 , + .opc0 =3 , .opc1 =3 , .crn =9 , .crm =14 , .opc2 =3 , + .access =PL0_RW , .accessfn = pmreg_access, + .type =ARM_CP_ALIAS , + .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr), + .writefn = pmovsset_write, + .raw_writefn = raw_write }, +REGINFO_SENTINEL +}; +static void teecr_write (CPUARMState *env,const ARMCPRegInfo *ri,uint64_t value) {
@@ -5212,6 +5237,9 @@ void register_cp_regs_for_features(ARMCPU *cpu) !arm_feature(env, ARM_FEATURE_PMSA)) {define_arm_cp_regs (cpu, v7mp_cp_reginfo); } +if (arm_feature (env,ARM_FEATURE_V7VE )) { +define_arm_cp_regs (cpu, pmovsset_cp_reginfo); + }if (arm_feature (env,ARM_FEATURE_V7 )) {/* v7 performance monitor control register: same implementor * field as main ID register, and we implement only the cycle
Signature · 1 line
2.19.1
PATCH v7 7/12 target/arm: Add array for supported PMU events, generate PMCEID[01]
In reply to Aaron LindsayThis commit doesn't add any supported events, but provides the framework for adding them. We store the pm_event structs in a simple array, and provide the mapping from the event numbers to array indexes in the supported_event_map array. Because the value of PMCEID[01] depends upon which events are supported at runtime, generate it dynamically.
--- target/arm/cpu.c | 20 +++++++++++++------- target/arm/cpu.h | 10 ++++++++++ target/arm/cpu64.c | 4 ---- target/arm/helper.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 65 insertions(+), 11 deletions(-)
target/arm/cpu.c +13 -7
@@ -957,9 +957,19 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)if (!cpu->has_pmu) {unset_feature (env,ARM_FEATURE_PMU ); cpu->id_aa64dfr0 &= ~0xf00 ; - }else if (!kvm_enabled ()) { -arm_register_pre_el_change_hook (cpu, &pmu_pre_el_change,0 ); -arm_register_el_change_hook (cpu, &pmu_post_el_change,0 ); + } +if (arm_feature (env,ARM_FEATURE_PMU )) { +uint64_t pmceid =get_pmceid (&cpu->env); + cpu->pmceid0 =extract64 (pmceid,0 ,32 ); + cpu->pmceid1 =extract64 (pmceid,32 ,32 ); + +if (!kvm_enabled ()) { +arm_register_pre_el_change_hook (cpu, &pmu_pre_el_change,0 ); +arm_register_el_change_hook (cpu, &pmu_post_el_change,0 ); + } + }else { + cpu->pmceid0 =0x00000000 ; + cpu->pmceid1 =0x00000000 ; }if (!arm_feature (env,ARM_FEATURE_EL2 )) {
@@ -1601,8 +1611,6 @@ static void cortex_a7_initfn(Object *obj) cpu->id_pfr0 =0x00001131 ; cpu->id_pfr1 =0x00011011 ; cpu->id_dfr0 =0x02010555 ; - cpu->pmceid0 =0x00000000 ; - cpu->pmceid1 =0x00000000 ; cpu->id_afr0 =0x00000000 ; cpu->id_mmfr0 =0x10101105 ; cpu->id_mmfr1 =0x40000000 ;
@@ -1647,8 +1655,6 @@ static void cortex_a15_initfn(Object *obj) cpu->id_pfr0 =0x00001131 ; cpu->id_pfr1 =0x00011011 ; cpu->id_dfr0 =0x02010555 ; - cpu->pmceid0 =0x0000000 ; - cpu->pmceid1 =0x00000000 ; cpu->id_afr0 =0x00000000 ; cpu->id_mmfr0 =0x10201105 ; cpu->id_mmfr1 =0x20000000 ;
target/arm/cpu.h +10 -0
@@ -991,6 +991,16 @@ void pmu_op_finish(CPUARMState *env);void pmu_pre_el_change (ARMCPU *cpu,void *ignored);void pmu_post_el_change (ARMCPU *cpu,void *ignored); +/* +* get_pmceid +* @env: CPUARMState +* +* Return the PMCEID[01] register values corresponding to the counters which +* are supported given the current configuration (0 is low 32, 1 is high 32 +* bits) +*/ +uint64_t get_pmceid (CPUARMState *env); +/* SCTLR bit meanings. Several bits have been reused in newer * versions of the architecture; in that case we define constants * for both old and new bit meanings. Code which tests against those
target/arm/cpu64.c +0 -4
@@ -138,8 +138,6 @@ static void aarch64_a57_initfn(Object *obj) cpu->isar.id_isar6 =0 ; cpu->isar.id_aa64pfr0 =0x00002222 ; cpu->id_aa64dfr0 =0x10305106 ; - cpu->pmceid0 =0x00000000 ; - cpu->pmceid1 =0x00000000 ; cpu->isar.id_aa64isar0 =0x00011120 ; cpu->id_aa64mmfr0 =0x00001124 ; cpu->dbgdidr =0x3516d000 ;
@@ -246,8 +244,6 @@ static void aarch64_a72_initfn(Object *obj) cpu->isar.id_isar5 =0x00011121 ; cpu->isar.id_aa64pfr0 =0x00002222 ; cpu->id_aa64dfr0 =0x10305106 ; - cpu->pmceid0 =0x00000000 ; - cpu->pmceid1 =0x00000000 ; cpu->isar.id_aa64isar0 =0x00011120 ; cpu->id_aa64mmfr0 =0x00001124 ; cpu->dbgdidr =0x3516d000 ;
target/arm/helper.c +42 -0
48 lines not on this page · raw message
Signature · 1 line
2.19.1
Re: [Qemu-arm] [PATCH v7 07/12] target/arm: Add array for supported PMU events, generate PMCEID[01]
Quoted 29 lines · Aaron Lindsay
This commit doesn't add any supported events, but provides the framework for adding them. We store the
pm_eventstructs in a simple array, and provide the mapping from the event numbers to array indexes in thesupported_event_maparray. Because the value of PMCEID[01] depends upon which events are supported at runtime, generate it dynamically.Signed-off-by Aaron Lindsay <[email protected]>--- target/arm/cpu.c | 20 +++++++++++++------- target/arm/cpu.h | 10 ++++++++++ target/arm/cpu64.c | 4 ---- target/arm/helper.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 65 insertions(+), 11 deletions(-)target/arm/cpu.c +4
-3@@ -957,9 +957,19 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)if (!cpu->has_pmu) {unset_feature (env,ARM_FEATURE_PMU ); cpu->id_aa64dfr0 &= ~0xf00 ; - }else if (!kvm_enabled ()) { -arm_register_pre_el_change_hook (cpu, &pmu_pre_el_change,0 ); -arm_register_el_change_hook (cpu, &pmu_post_el_change,0 ); + } +if (arm_feature (env,ARM_FEATURE_PMU )) { +uint64_t pmceid =get_pmceid (&cpu->env); + cpu->pmceid0 =extract64 (pmceid,0 ,32 );
target/arm/cpu.c static void arm_cpu_realizefn(DeviceState *dev, Error **errp) · line 973
Quoted 10 lines
target/arm/cpu.c +9
-0+ cpu->pmceid1 =extract64 (pmceid,32 ,32 ); + +if (!kvm_enabled ()) { +arm_register_pre_el_change_hook (cpu, &pmu_pre_el_change,0 ); +arm_register_el_change_hook (cpu, &pmu_post_el_change,0 ); + } + }else { + cpu->pmceid0 =0x00000000 ; + cpu->pmceid1 =0x00000000 ; }
This now sets one of the ID registers for "we have no PMU" in the first "if (!cpu->has_pmu)" statement (id_aa64dfr0), and some of them (pmceid0, pcmeid1) in this else clause at the end. We should put them all in the same place.
Quoted 27 lines
target/arm/cpu.c +0
-4if (!arm_feature (env,ARM_FEATURE_EL2 )) {@@ -1601,8 +1611,6 @@ static void cortex_a7_initfn(Object *obj) cpu->id_pfr0 =0x00001131 ; cpu->id_pfr1 =0x00011011 ; cpu->id_dfr0 =0x02010555 ; - cpu->pmceid0 =0x00000000 ; - cpu->pmceid1 =0x00000000 ; cpu->id_afr0 =0x00000000 ; cpu->id_mmfr0 =0x10101105 ; cpu->id_mmfr1 =0x40000000 ;@@ -1647,8 +1655,6 @@ static void cortex_a15_initfn(Object *obj) cpu->id_pfr0 =0x00001131 ; cpu->id_pfr1 =0x00011011 ; cpu->id_dfr0 =0x02010555 ; - cpu->pmceid0 =0x0000000 ; - cpu->pmceid1 =0x00000000 ; cpu->id_afr0 =0x00000000 ; cpu->id_mmfr0 =0x10201105 ; cpu->id_mmfr1 =0x20000000 ;target/arm/cpu.h +0
-0@@ -991,6 +991,16 @@ void pmu_op_finish(CPUARMState *env);void pmu_pre_el_change (ARMCPU *cpu,void *ignored);void pmu_post_el_change (ARMCPU *cpu,void *ignored);
target/arm/cpu.h void pmu_op_finish(CPUARMState *env); · line 1002
Quoted 10 lines
target/arm/cpu.h +9
-0+/* +* get_pmceid +* @env: CPUARMState +* +* Return the PMCEID[01] register values corresponding to the counters which +* are supported given the current configuration (0 is low 32, 1 is high 32 +* bits) +*/ +uint64_t get_pmceid (CPUARMState *env);
This doesn't look like the right API, because in AArch64 PMCEID0_EL0 and PMCEID1_EL0 are both 64-bit registers, so you can't fit them both into a single uint64_t.
thanks
-- PMM
Re: [Qemu-arm] [PATCH v7 07/12] target/arm: Add array for supported PMU events, generate PMCEID[01]
Quoted 21 lines · Peter Maydell
Quoted 20 lines · Aaron Lindsay
target/arm/cpu.c +11
-3@@ -957,9 +957,19 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)if (!cpu->has_pmu) {unset_feature (env,ARM_FEATURE_PMU ); cpu->id_aa64dfr0 &= ~0xf00 ; - }else if (!kvm_enabled ()) { -arm_register_pre_el_change_hook (cpu, &pmu_pre_el_change,0 ); -arm_register_el_change_hook (cpu, &pmu_post_el_change,0 ); + } +if (arm_feature (env,ARM_FEATURE_PMU )) { +uint64_t pmceid =get_pmceid (&cpu->env); + cpu->pmceid0 =extract64 (pmceid,0 ,32 ); + cpu->pmceid1 =extract64 (pmceid,32 ,32 ); + +if (!kvm_enabled ()) { +arm_register_pre_el_change_hook (cpu, &pmu_pre_el_change,0 ); +arm_register_el_change_hook (cpu, &pmu_post_el_change,0 ); + } + }else {
Quoted 8 lines
target/arm/cpu.c static void arm_cpu_realizefn(DeviceState *dev, Error **errp) · line 973
Quoted 3 lines
target/arm/cpu.c +2
-0+ cpu->pmceid0 =0x00000000 ; + cpu->pmceid1 =0x00000000 ; }This now sets one of the ID registers for "we have no PMU" in the first "if (!cpu->has_pmu)" statement (
id_aa64dfr0), and some of them (pmceid0, pcmeid1) in this else clause at the end. We should put them all in the same place.
I agree that would be cleaner - I'll move the id_aa64dfr0 update to later else clause.
Quoted 5 lines
Quoted 5 lines
target/arm/cpu.c +5
-0+/* +* get_pmceid +* @env: CPUARMState +* +* Return the PMCEID[01] register values corresponding to the counters which
Quoted 8 lines
Quoted 4 lines
+ * are supported given the current configuration (0 is low 32, 1 is high 32
+ * bits)
+ */
+uint64_tget_pmceid(CPUARMState *env);This doesn't look like the right API, because in AArch64
PMCEID0_EL0andPMCEID1_EL0are both 64-bit registers, so you can't fit them both into a singleuint64_t.
Heh, I think I started working on this long enough ago that I was using a copy of the ARMv8.0 ARM - before the statistical profiling extensions were announced. I believe those are the only currently-defined common events >= 0x4000, so they're the only bits defined in the upper 32 bits of PMCEID[01].
Now that I look at it, pmceid[01] are currently only defined as uint32_t, and we don't have PMCEID[23] for the high bits for AArch32. Perhaps that should be a separate patch.
At any rate, I'll plan to update this the following signature for the next version, where which is [01] for which PMCEID is being requested. For now I'll probably just put a comment about not supporting the 0x40xx events, since I don't know that coming up with a sparse array is worth it, but the signature will be appropriate if we add support later:
uint64_t get_pmceid(CPUARMState *env, unsigned which);
-Aaron
PATCH v7 8/12 target/arm: Finish implementation of PM[X]EVCNTR and PM[X]EVTYPER
In reply to Aaron LindsayAdd arrays to hold the registers, the definitions themselves, access functions, and logic to reset counters when PMCR.P is set. Update filtering code to support counters other than PMCCNTR. Support migration with raw read/write functions.
--- target/arm/cpu.h | 3 + target/arm/helper.c | 296 +++++++++++++++++++++++++++++++++++++++++--- 2 files changed, 282 insertions(+), 17 deletions(-)
target/arm/cpu.h +3 -0
@@ -482,6 +482,9 @@ typedef struct CPUARMState {* pmccntr_op_finish. */ uint64_t c15_ccnt_delta; +uint64_t c14_pmevcntr[31 ]; +uint64_t c14_pmevcntr_delta[31 ]; +uint64_t c14_pmevtyper[31 ];uint64_t pmccfiltr_el0;/* Performance Monitor Filter Register */ uint64_t vpidr_el2;/* Virtualization Processor ID Register */ uint64_t vmpidr_el2;/* Virtualization Multiprocessor ID Register */
target/arm/helper.c +279 -17
397 lines not on this page · raw message
Signature · 1 line
2.19.1
PATCH v7 9/12 target/arm: PMU: Add instruction and cycle events
In reply to Aaron LindsayThe instruction event is only enabled when icount is used, cycles are always supported. Always defining get_cycle_count (but altering its behavior depending on CONFIG_USER_ONLY) allows us to remove some CONFIG_USER_ONLY #defines throughout the rest of the code.
--- target/arm/helper.c | 90 ++++++++++++++++++++++----------------------- 1 file changed, 44 insertions(+), 46 deletions(-)
target/arm/helper.c +44 -46
@@ -15,6 +15,7 @@#include "arm_ldst.h" #include <zlib.h> /* For crc32 */ #include "exec/semihost.h" +#include "sysemu/cpus.h" #include "sysemu/kvm.h" #include "fpu/softfloat.h" #include "qemu/range.h"
@@ -1021,9 +1022,50 @@ typedef struct pm_event {uint64_t (*get_count)(CPUARMState *); } pm_event; +static bool event_always_supported (CPUARMState *env) +{ +return true; +} + +/* +* Return the underlying cycle count for the PMU cycle counters. If we're in +* usermode, simply return 0. +*/ +static uint64_t cycles_get_count (CPUARMState *env) +{ +#ifndef CONFIG_USER_ONLY +return muldiv64 (qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ), +ARM_CPU_FREQ ,NANOSECONDS_PER_SECOND ); +#else +return cpu_get_host_ticks (); +#endif +} + +#ifndef CONFIG_USER_ONLY +static bool instructions_supported (CPUARMState *env) +{ +return use_icount ==1 /* Precise instruction counting */ ; +} + +static uint64_t instructions_get_count (CPUARMState *env) +{ +return (uint64_t )cpu_get_icount_raw (); +} +#endif +static const pm_event pm_events[] = { +#ifndef CONFIG_USER_ONLY + { .number =0x008 ,/* INST_RETIRED, Instruction architecturally executed */ + .supported = instructions_supported, + .get_count = instructions_get_count, + }, + { .number =0x011 ,/* CPU_CYCLES, Cycle */ + .supported = event_always_supported, + .get_count = cycles_get_count, + } +#endif }; -#define MAX_EVENT_ID 0x0 +#define MAX_EVENT_ID 0x11#define UNSUPPORTED_EVENT UINT16_MAXstatic uint16_t supported_event_map[MAX_EVENT_ID +1 ];
@@ -1116,8 +1158,6 @@ static CPAccessResult pmreg_access_swinc(CPUARMState *env,return pmreg_access (env, ri, isread); } -#ifndef CONFIG_USER_ONLY -static CPAccessResult pmreg_access_selr (CPUARMState *env,const ARMCPRegInfo *ri,bool isread)
@@ -1228,9 +1268,7 @@ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter)*/ void pmccntr_op_start (CPUARMState *env) { -uint64_t cycles =0 ; - cycles =muldiv64 (qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ), -ARM_CPU_FREQ ,NANOSECONDS_PER_SECOND ); +uint64_t cycles =cycles_get_count (env);if (pmu_counter_enabled (env,31 )) {uint64_t eff_cycles = cycles;
@@ -1376,42 +1414,6 @@ static void pmccntr_write32(CPUARMState *env, const ARMCPRegInfo *ri,pmccntr_write (env, ri,deposit64 (cur_val,0 ,32 , value)); } -#else /* CONFIG_USER_ONLY */ - -void pmccntr_op_start (CPUARMState *env) -{ -} - -void pmccntr_op_finish (CPUARMState *env) -{ -} - -void pmevcntr_op_start (CPUARMState *env,uint8_t i) -{ -} - -void pmevcntr_op_finish (CPUARMState *env,uint8_t i) -{ -} - -void pmu_op_start (CPUARMState *env) -{ -} - -void pmu_op_finish (CPUARMState *env) -{ -} - -void pmu_pre_el_change (ARMCPU *cpu,void *ignored) -{ -} - -void pmu_post_el_change (ARMCPU *cpu,void *ignored) -{ -} - -#endif -static void pmccfiltr_write (CPUARMState *env,const ARMCPRegInfo *ri,uint64_t value) {
@@ -1799,7 +1801,6 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {/* Unimplemented so WI. */ { .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4, .access = PL0_W, .accessfn = pmreg_access_swinc, .type = ARM_CP_NOP }, -#ifndef CONFIG_USER_ONLY { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5, .access = PL0_RW, .type = ARM_CP_ALIAS, .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmselr),
@@ -1821,7 +1822,6 @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .fieldoffset = offsetof(CPUARMState, cp15.c15_ccnt), .readfn = pmccntr_read, .writefn = pmccntr_write, .raw_readfn = raw_read, .raw_writefn = raw_write, }, -#endif { .name = "PMCCFILTR", .cp = 15, .opc1 = 0, .crn = 14, .crm = 15, .opc2 = 7, .writefn = pmccfiltr_write_a32, .readfn = pmccfiltr_read_a32, .access = PL0_RW, .accessfn = pmreg_access,
@@ -5512,7 +5512,6 @@ void register_cp_regs_for_features(ARMCPU *cpu)* count register. */ unsigned int i, pmcrn =0 ; -#ifndef CONFIG_USER_ONLY ARMCPRegInfo pmcr = { .name ="PMCR" , .cp =15 , .crn =9 , .crm =12 , .opc1 =0 , .opc2 =0 , .access =PL0_RW ,
@@ -5569,7 +5568,6 @@ void register_cp_regs_for_features(ARMCPU *cpu)g_free (pmevtyper_name);g_free (pmevtyper_el0_name); } -#endif ARMCPRegInfo clidr = { .name ="CLIDR" , .state =ARM_CP_STATE_BOTH , .opc0 =3 , .crn =0 , .crm =0 , .opc1 =1 , .opc2 =1 ,
Signature · 1 line
2.19.1
PATCH v7 10/12 target/arm: PMU: Set PMCR.N to 4
In reply to Aaron LindsayThis both advertises that we support four counters and enables them because the pmu_num_counters() reads this value from PMCR.
--- target/arm/helper.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
target/arm/helper.c +5 -5
@@ -1753,7 +1753,7 @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .access = PL1_W, .type = ARM_CP_NOP },/* Performance monitors are implementation defined in v7, * but with an ARM recommended set of registers, which we -* follow (although we don't actually implement any counters) +* follow. * * Performance registers fall into three categories: * (a) always UNDEF in PL0, RW in PL1 (PMINTENSET, PMINTENCLR)
@@ -5508,10 +5508,10 @@ void register_cp_regs_for_features(ARMCPU *cpu) }if (arm_feature (env,ARM_FEATURE_V7 )) {/* v7 performance monitor control register: same implementor -* field as main ID register, and we implement only the cycle -* count register. +* field as main ID register, and we implement four counters in +* addition to the cycle count register. */ -unsigned int i, pmcrn =0 ; +unsigned int i, pmcrn =4 ;ARMCPRegInfo pmcr = { .name ="PMCR" , .cp =15 , .crn =9 , .crm =12 , .opc1 =0 , .opc2 =0 , .access =PL0_RW ,
@@ -5526,7 +5526,7 @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL0_RW, .accessfn = pmreg_access, .type = ARM_CP_IO, .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcr), - .resetvalue = cpu->midr & 0xff000000, + .resetvalue = (cpu->midr & 0xff000000) | (pmcrn << PMCRN_SHIFT), .writefn = pmcr_write, .raw_writefn = raw_write, };define_one_arm_cp_reg (cpu, &pmcr);
Signature · 1 line
2.19.1
Re: [Qemu-arm] [PATCH v7 10/12] target/arm: PMU: Set PMCR.N to 4
Quoted 37 lines · Aaron Lindsay
This both advertises that we support four counters and enables them because the
pmu_num_counters()reads this value from PMCR.Signed-off-by Aaron Lindsay <[email protected]>Signed-off-by Aaron Lindsay <[email protected]>--- target/arm/helper.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)target/arm/helper.c +4
-4@@ -1753,7 +1753,7 @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .access = PL1_W, .type = ARM_CP_NOP },/* Performance monitors are implementation defined in v7, * but with an ARM recommended set of registers, which we -* follow (although we don't actually implement any counters) +* follow. * * Performance registers fall into three categories: * (a) always UNDEF in PL0, RW in PL1 (PMINTENSET, PMINTENCLR) @@ -5508,10 +5508,10 @@ void register_cp_regs_for_features(ARMCPU *cpu) }if (arm_feature (env,ARM_FEATURE_V7 )) {/* v7 performance monitor control register: same implementor -* field as main ID register, and we implement only the cycle -* count register. +* field as main ID register, and we implement four counters in +* addition to the cycle count register. */ -unsigned int i, pmcrn =0 ; +unsigned int i, pmcrn =4 ;ARMCPRegInfo pmcr = { .name ="PMCR" , .cp =15 , .crn =9 , .crm =12 , .opc1 =0 , .opc2 =0 , .access =PL0_RW ,
target/arm/helper.c void register_cp_regs_for_features(ARMCPU *cpu)
Quoted 9 lines
target/arm/helper.c +1
-2@@ -5526,7 +5526,7 @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL0_RW, .accessfn = pmreg_access, .type = ARM_CP_IO, .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcr), - .resetvalue = cpu->midr & 0xff000000, + .resetvalue = (cpu->midr & 0xff000000) | (pmcrn << PMCRN_SHIFT), .writefn = pmcr_write, .raw_writefn = raw_write, };define_one_arm_cp_reg (cpu, &pmcr); --
With PMCR.N > 0, this means that MDCR_EL2.HPMN behaviour and more generally support for the EL2 performance monitor trapping options in MDCR_EL2 become relevant. But I think we're probably best off leaving that for a future patchset.
thanks
-- PMM
PATCH v7 11/12 target/arm: Implement PMSWINC
In reply to Aaron Lindsay--- target/arm/helper.c | 39 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 37 insertions(+), 2 deletions(-)
target/arm/helper.c +37 -2
@@ -1027,6 +1027,15 @@ static bool event_always_supported(CPUARMState *env)return true; } +static uint64_t swinc_get_count (CPUARMState *env) +{ +/* +* SW_INCR events are written directly to the pmevcntr's by writes to +* PMSWINC, so there is no underlying count maintained by the PMU itself +*/ +return 0 ; +} +/* * Return the underlying cycle count for the PMU cycle counters. If we're in * usermode, simply return 0.
@@ -1054,6 +1063,10 @@ static uint64_t instructions_get_count(CPUARMState *env)#endif static const pm_event pm_events[] = { + { .number =0x000 ,/* SW_INCR */ + .supported = event_always_supported, + .get_count = swinc_get_count, + }, #ifndef CONFIG_USER_ONLY { .number =0x008 ,/* INST_RETIRED, Instruction architecturally executed */ .supported = instructions_supported,
@@ -1378,6 +1391,24 @@ static void pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri,pmu_op_finish (env); } +static void pmswinc_write (CPUARMState *env,const ARMCPRegInfo *ri, +uint64_t value) +{ +unsigned int i; +for (i =0 ; i <pmu_num_counters (env); i++) { +/* Increment a counter's count iff: */ +if ((value & (1 << i)) &&/* counter's bit is set */ +/* counter is enabled and not filtered */ +pmu_counter_enabled (env, i) && +/* counter is SW_INCR */ + (env->cp15.c14_pmevtyper[i] &PMXEVTYPER_EVTCOUNT ) ==0x0 ) { +pmevcntr_op_start (env, i); + env->cp15.c14_pmevcntr[i]++; +pmevcntr_op_finish (env, i); + } + } +} +static uint64_t pmccntr_read (CPUARMState *env,const ARMCPRegInfo *ri) {uint64_t ret;
@@ -1798,9 +1829,13 @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr), .writefn = pmovsr_write, .raw_writefn = raw_write }, -/* Unimplemented so WI. */ { .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4, - .access = PL0_W, .accessfn = pmreg_access_swinc, .type = ARM_CP_NOP }, + .access = PL0_W, .accessfn = pmreg_access_swinc, .type = ARM_CP_NO_RAW, + .writefn = pmswinc_write }, + { .name = "PMSWINC_EL0", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 4, + .access = PL0_W, .accessfn = pmreg_access_swinc, .type = ARM_CP_NO_RAW, + .writefn = pmswinc_write }, { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5, .access = PL0_RW, .type = ARM_CP_ALIAS, .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmselr),
Signature · 1 line
2.19.1
PATCH v7 12/12 target/arm: Send interrupts on PMU counter overflow
In reply to Aaron LindsaySetup a QEMUTimer to get a callback when we expect counters to next overflow and trigger an interrupt at that time.
--- target/arm/cpu.c | 11 ++++ target/arm/cpu.h | 7 +++ target/arm/helper.c | 126 +++++++++++++++++++++++++++++++++++++++++--- 3 files changed, 138 insertions(+), 6 deletions(-)
target/arm/cpu.c +11 -0
@@ -764,6 +764,12 @@ static void arm_cpu_finalizefn(Object *obj)QLIST_REMOVE (hook, node);g_free (hook); } +#ifndef CONFIG_USER_ONLY +if (arm_feature (&cpu->env,ARM_FEATURE_PMU )) { +timer_deinit (cpu->pmu_timer); +timer_free (cpu->pmu_timer); + } +#endif }static void arm_cpu_realizefn (DeviceState *dev,Error **errp)
@@ -967,6 +973,11 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)arm_register_pre_el_change_hook (cpu, &pmu_pre_el_change,0 );arm_register_el_change_hook (cpu, &pmu_post_el_change,0 ); } + +#ifndef CONFIG_USER_ONLY + cpu->pmu_timer =timer_new_ns (QEMU_CLOCK_VIRTUAL , arm_pmu_timer_cb, + cpu); +#endif }else { cpu->pmceid0 =0x00000000 ; cpu->pmceid1 =0x00000000 ;
target/arm/cpu.h +7 -0
@@ -730,6 +730,8 @@ struct ARMCPU {/* Timers used by the generic (architected) timer */ QEMUTimer *gt_timer[NUM_GTIMERS ]; +/* Timer used by the PMU */ +QEMUTimer *pmu_timer;/* GPIO outputs for generic timer */ qemu_irq gt_timer_outputs[NUM_GTIMERS ];/* GPIO output for GICv3 maintenance interrupt signal */
@@ -988,6 +990,11 @@ void pmccntr_op_finish(CPUARMState *env);void pmu_op_start (CPUARMState *env);void pmu_op_finish (CPUARMState *env); +/** +* Called when a PMU counter is due to overflow +*/ +void arm_pmu_timer_cb (void *opaque); +/** * Functions to register as EL change hooks for PMU mode filtering */
target/arm/helper.c +120 -6
260 lines not on this page · raw message
Signature · 1 line
2.19.1
Re: [Qemu-devel] [PATCH v7 12/12] target/arm: Send interrupts on PMU counter overflow
Quoted 2 lines · Aaron Lindsay
Setup a QEMUTimer to get a callback when we expect counters to next overflow and trigger an interrupt at that time.
Peter,
It looks like there's probably going to be at least a v8 in this series since you've made a few comments which require changes. But I don't think this final patch has ever received any review comments from anyone, and I suspect it's not because it's perfect...
Would you mind taking a look at this one during your review if you can find time?
Thanks!
-Aaron
Re: [Qemu-arm] [PATCH v7 12/12] target/arm: Send interrupts on PMU counter overflow
Quoted 6 lines · Aaron Lindsay
Quoted 2 lines · Aaron Lindsay
Setup a QEMUTimer to get a callback when we expect counters to next overflow and trigger an interrupt at that time.
Peter,
Quoted 7 lines
It looks like there's probably going to be at least a v8 in this series since you've made a few comments which require changes. But I don't think this final patch has ever received any review comments from anyone, and I suspect it's not because it's perfect...
Would you mind taking a look at this one during your review if you can find time?
I think I'd rather let Richard review this one...
thanks
-- PMM
This series failed docker-quick@centos7 build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.
Hi,
This series failed docker-quick@centos7 build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.
Type: series
Message-id: [email protected]
Subject: [Qemu-devel] [PATCH v7 00/12] More fully implement ARM PMUv3
=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-quick@centos7 SHOW_ENV=1 J=8 === TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
Switched to a new branch 'test'5d7e95a226 target/arm: Send interrupts on PMU counter overflow 7c803f850e target/arm: Implement PMSWINC0b85f12afc target/arm: PMU: Set PMCR.N to 4
9723933103 target/arm: PMU: Add instruction and cycle events db26e0c7bf target/arm: Finish implementation of PM[X]EVCNTR and PM[X]EVTYPER 1a1b5fa486 target/arm: Add array for supported PMU events, generate PMCEID[01] e19bb543b8 target/arm: Implement PMOVSSET07b7bf48b1 target/arm: Allow AArch32 access for PMCCFILTR 8eefc04a65 target/arm: Filter cycle counter based on PMCCFILTR_EL0 5a3876bb4d target/arm: Swap PMU values before/after migrations cfba1f5577 target/arm: Reorganize PMCCNTR accesses9803bffbee migration: Add post_save function to VMStateDescription
=== OUTPUT BEGIN ===
BUILD centos7
make[1]: Entering directory '/var/tmp/patchew-tester-tmp-_16qprbf/src'
GEN /var/tmp/patchew-tester-tmp-_16qprbf/src/docker-src.2018-11-06-03.47.10.29427/qemu.tar
Cloning into '/var/tmp/patchew-tester-tmp-_16qprbf/src/docker-src.2018-11-06-03.47.10.29427/qemu.tar.vroot'... done.
Checking out files: 45% (2954/6453) Checking out files: 46% (2969/6453) Checking out files: 47% (3033/6453) Checking out files: 48% (3098/6453) Checking out files: 49% (3162/6453) Checking out files: 50% (3227/6453) Checking out files: 51% (3292/6453) Checking out files: 52% (3356/6453) Checking out files: 53% (3421/6453) Checking out files: 54% (3485/6453) Checking out files: 55% (3550/6453) Checking out files: 56% (3614/6453) Checking out files: 57% (3679/6453) Checking out files: 58% (3743/6453) Checking out files: 59% (3808/6453) Checking out files: 60% (3872/6453) Checking out files: 61% (3937/6453) Checking out files: 62% (4001/6453) Checking out files: 63% (4066/6453) Checking out files: 64% (4130/6453) Checking out files: 65% (4195/6453) Checking out files: 66% (4259/6453) Checking out files: 67% (4324/6453) Checking out files: 68% (4389/6453) Checking out files: 69% (4453/6453) Checking out files: 70% (4518/6453) Checking out files: 71% (4582/6453) Checking out files: 72% (4647/6453) Checking out files: 73% (4711/6453) Checking out files: 74% (4776/6453) Checking out files: 75% (4840/6453) Checking out files: 76% (4905/6453) Checking out files: 77% (4969/6453) Checking out files: 78% (5034/6453) Checking out files: 79% (5098/6453) Checking out files: 80% (5163/6453) Checking out files: 81% (5227/6453) Checking out files: 82% (5292/6453) Checking out files: 83% (5356/6453) Checking out files: 84% (5421/6453) Checking out files: 85% (5486/6453) Checking out files: 86% (5550/6453) Checking out files: 87% (5615/6453) Checking out files: 88% (5679/6453) Checking out files: 89% (5744/6453) Checking out files: 90% (5808/6453) Checking out files: 91% (5873/6453) Checking out files: 92% (5937/6453) Checking out files: 93% (6002/6453) Checking out files: 94% (6066/6453) Checking out files: 95% (6131/6453) Checking out files: 96% (6195/6453) Checking out files: 97% (6260/6453) Checking out files: 98% (6324/6453) Checking out files: 99% (6389/6453) Checking out files: 100% (6453/6453) Checking out files: 100% (6453/6453), done.
Your branch is up-to-date with 'origin/test'.
Submodule 'dtc' (git://git.qemu-project.org/dtc.git) registered for path 'dtc'
Cloning into '/var/tmp/patchew-tester-tmp-_16qprbf/src/docker-src.2018-11-06-03.47.10.29427/qemu.tar.vroot/dtc'... Submodule path 'dtc': checked out '88f18909db731a627456f26d779445f84e449536'
Submodule 'ui/keycodemapdb' (git://git.qemu.org/keycodemapdb.git) registered for path 'ui/keycodemapdb' Cloning into '/var/tmp/patchew-tester-tmp-_16qprbf/src/docker-src.2018-11-06-03.47.10.29427/qemu.tar.vroot/ui/keycodemapdb'... Submodule path 'ui/keycodemapdb': checked out '6b3d716e2b6472eb7189d3220552280ef3d832ce'
COPY RUNNER
RUN test-quick in qemu:centos7
Packages installed:
SDL-devel-1.2.15-14.el7.x86_64
bison-3.0.4-1.el7.x86_64
bzip2-1.0.6-13.el7.x86_64
bzip2-devel-1.0.6-13.el7.x86_64
ccache-3.3.4-1.el7.x86_64
csnappy-devel-0-6.20150729gitd7bc683.el7.x86_64
flex-2.5.37-3.el7.x86_64
gcc-4.8.5-28.el7_5.1.x86_64
gettext-0.19.8.1-2.el7.x86_64
git-1.8.3.1-14.el7_5.x86_64
glib2-devel-2.54.2-2.el7.x86_64
libaio-devel-0.3.109-13.el7.x86_64
libepoxy-devel-1.3.1-2.el7_5.x86_64
libfdt-devel-1.4.6-1.el7.x86_64
lzo-devel-2.06-8.el7.x86_64
make-3.82-23.el7.x86_64
mesa-libEGL-devel-17.2.3-8.20171019.el7.x86_64
mesa-libgbm-devel-17.2.3-8.20171019.el7.x86_64
nettle-devel-2.7.1-8.el7.x86_64
package g++ is not installed
package librdmacm-devel is not installed
pixman-devel-0.34.0-1.el7.x86_64
spice-glib-devel-0.34-3.el7_5.1.x86_64
spice-server-devel-0.14.0-2.el7_5.4.x86_64
tar-1.26-34.el7.x86_64
vte-devel-0.28.2-10.el7.x86_64
xen-devel-4.6.6-12.el7.x86_64
zlib-devel-1.2.7-17.el7.x86_64
Environment variables:
PACKAGES=bison bzip2 bzip2-devel ccache csnappy-devel flex g++ gcc gettext git glib2-devel libaio-devel libepoxy-devel libfdt-devel librdmacm-devel lzo-devel make mesa-libEGL-devel mesa-libgbm-devel nettle-devel pixman-devel SDL-devel spice-glib-devel spice-server-devel tar vte-devel xen-devel zlib-devel
HOSTNAME=037a46f30911
MAKEFLAGS= -j8
J=8
CCACHE_DIR=/var/tmp/ccache
EXTRA_CONFIGURE_OPTS=
V=
SHOW_ENV=1 PATH=/usr/lib/ccache:/usr/lib64/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin PWD=/
TARGET_LIST=
SHLVL=1
HOME=/home/patchew
TEST_DIR=/tmp/qemu-test
FEATURES= dtc
DEBUG=
_=/usr/bin/env
Configure options:
--enable-werror --target-list=x86_64-softmmu,aarch64-softmmu --prefix=/tmp/qemu-test/install No C++ compiler available; disabling C++ specific optional code
Install prefix /tmp/qemu-test/install BIOS directory /tmp/qemu-test/install/share/qemu firmware path /tmp/qemu-test/install/share/qemu-firmware binary directory /tmp/qemu-test/install/bin
library directory /tmp/qemu-test/install/lib module directory /tmp/qemu-test/install/lib/qemu libexec directory /tmp/qemu-test/install/libexec include directory /tmp/qemu-test/install/include config directory /tmp/qemu-test/install/etc
local state directory /tmp/qemu-test/install/var
Manual directory /tmp/qemu-test/install/share/man ELF interp prefix /usr/gnemul/qemu-%M
Source path /tmp/qemu-test/src
GIT binary git
GIT submodules
C compiler cc
Host C compiler cc
C++ compiler
Objective-C compiler cc
ARFLAGS rv CFLAGS -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -g QEMU_CFLAGS -I/usr/include/pixman-1 -Werror -pthread -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -fPIE -DPIE -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wendif-labels -Wno-missing-include-dirs -Wempty-body -Wnested-externs -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wold-style-declaration -Wold-style-definition -Wtype-limits -fstack-protector-strong -Wno-missing-braces -I/usr/include/libpng15 -pthread -I/usr/include/spice-server -I/usr/include/cacard -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/nss3 -I/usr/include/nspr4 -I/usr/include/spice-1 LDFLAGS -Wl,--warn-common -Wl,-z,relro -Wl,-z,now -pie -m64 -g QEMU_LDFLAGS make make install install python python -B smbd /usr/sbin/smbd module support no host CPU x86_64 host big endian no target list x86_64-softmmu aarch64-softmmu gprof enabled no sparse enabled no strip binaries yes profiler no static build no SDL support yes (1.2.15) GTK support no GTK GL support no VTE support no TLS priority NORMAL GNUTLS support no libgcrypt no nettle yes (2.7.1) libtasn1 no curses support yes virgl support no curl support no mingw32 support no Audio drivers oss
Block whitelist (rw)
Block whitelist (ro)
VirtFS support no
Multipath support no
VNC support yes VNC SASL support no VNC JPEG support no VNC PNG support yes xen support yes xen ctrl version 40600 pv dom build no brlapi support no bluez support no Documentation no PIE yes vde support no netmap support no Linux AIO support yes ATTR/XATTR support yes Install blobs yes KVM support yes HAX support no HVF support no WHPX support no TCG support yes TCG debug enabled no TCG interpreter no malloc trim support yes RDMA support yes PVRDMA support yes fdt support system membarrier no preadv support yes fdatasync yes madvise yes posix_madvise yes posix_memalign yes
libcap-ng support no
vhost-net support yes
vhost-crypto support yes
vhost-scsi support yes
vhost-vsock support yes
vhost-user support yes
Trace backends log spice support yes (0.12.13/0.14.0) rbd support no xfsctl support no smartcard support yes libusb no usb net redir no OpenGL support yes OpenGL dmabufs yes libiscsi support no libnfs support no
build guest agent yes
QGA VSS support no
QGA w32 disk info no
QGA MSI support no
seccomp support no
coroutine backend ucontext
coroutine pool yes
debug stack usage no
mutex debugging no
crypto afalg no
GlusterFS support no
gcov gcov gcov enabled no TPM support yes libssh2 support no TPM passthrough yes TPM emulator yes QOM debugging yes Live block migration yes lzo support yes snappy support no bzip2 support yes NUMA host support no libxml2 no tcmalloc support no jemalloc support no avx2 optimization yes replication support yes VxHS block device no capstone no docker no libpmem support no libudev no
WARNING: Use of SDL 1.2 is deprecated and will be removed in
WARNING: future releases. Please switch to using SDL 2.0
NOTE: cross-compilers enabled: 'cc'
GEN x86_64-softmmu/config-devices.mak.tmp GEN aarch64-softmmu/config-devices.mak.tmp GEN config-host.h GEN qemu-options.def GEN trace/generated-tcg-tracers.h GEN qapi-gen GEN trace/generated-helpers-wrappers.h GEN trace/generated-helpers.h GEN trace/generated-helpers.c GEN module_block.h GEN aarch64-softmmu/config-devices.mak GEN ui/input-keymap-atset1-to-qcode.c GEN ui/input-keymap-linux-to-qcode.c GEN x86_64-softmmu/config-devices.mak GEN ui/input-keymap-qcode-to-atset1.c GEN ui/input-keymap-qcode-to-atset2.c GEN ui/input-keymap-qcode-to-atset3.c GEN ui/input-keymap-qcode-to-linux.c GEN ui/input-keymap-qcode-to-qnum.c GEN ui/input-keymap-qcode-to-sun.c GEN ui/input-keymap-qnum-to-qcode.c GEN ui/input-keymap-usb-to-qcode.c GEN ui/input-keymap-win32-to-qcode.c GEN ui/input-keymap-xorgevdev-to-qcode.c GEN ui/input-keymap-x11-to-qcode.c GEN ui/input-keymap-xorgkbd-to-qcode.c GEN ui/input-keymap-xorgxquartz-to-qcode.c GEN ui/input-keymap-xorgxwin-to-qcode.c GEN ui/input-keymap-osx-to-qcode.c GEN tests/test-qapi-gen GEN trace-root.h GEN accel/kvm/trace.h GEN accel/tcg/trace.h GEN audio/trace.h GEN block/trace.h GEN chardev/trace.h GEN crypto/trace.h GEN hw/9pfs/trace.h GEN hw/acpi/trace.h GEN hw/alpha/trace.h GEN hw/arm/trace.h GEN hw/audio/trace.h GEN hw/block/trace.h GEN hw/block/dataplane/trace.h GEN hw/char/trace.h GEN hw/display/trace.h GEN hw/dma/trace.h GEN hw/hppa/trace.h GEN hw/i2c/trace.h GEN hw/i386/trace.h GEN hw/i386/xen/trace.h GEN hw/ide/trace.h GEN hw/input/trace.h GEN hw/intc/trace.h GEN hw/isa/trace.h GEN hw/mem/trace.h GEN hw/misc/trace.h GEN hw/misc/macio/trace.h GEN hw/net/trace.h GEN hw/nvram/trace.h GEN hw/pci/trace.h GEN hw/pci-host/trace.h GEN hw/ppc/trace.h GEN hw/rdma/trace.h GEN hw/rdma/vmw/trace.h GEN hw/s390x/trace.h GEN hw/scsi/trace.h GEN hw/sd/trace.h GEN hw/sparc/trace.h GEN hw/sparc64/trace.h GEN hw/timer/trace.h GEN hw/tpm/trace.h GEN hw/usb/trace.h GEN hw/vfio/trace.h GEN hw/virtio/trace.h GEN hw/watchdog/trace.h GEN hw/xen/trace.h GEN io/trace.h GEN linux-user/trace.h GEN migration/trace.h GEN nbd/trace.h GEN net/trace.h GEN qapi/trace.h GEN qom/trace.h GEN scsi/trace.h GEN target/arm/trace.h GEN target/i386/trace.h GEN target/mips/trace.h GEN target/ppc/trace.h GEN target/s390x/trace.h GEN target/sparc/trace.h GEN ui/trace.h GEN util/trace.h GEN trace-root.c GEN accel/kvm/trace.c GEN accel/tcg/trace.c GEN audio/trace.c GEN block/trace.c GEN chardev/trace.c GEN crypto/trace.c GEN hw/9pfs/trace.c GEN hw/acpi/trace.c GEN hw/alpha/trace.c GEN hw/arm/trace.c GEN hw/audio/trace.c GEN hw/block/trace.c GEN hw/block/dataplane/trace.c GEN hw/char/trace.c GEN hw/display/trace.c GEN hw/dma/trace.c GEN hw/hppa/trace.c GEN hw/i2c/trace.c GEN hw/i386/trace.c GEN hw/i386/xen/trace.c GEN hw/ide/trace.c GEN hw/input/trace.c GEN hw/intc/trace.c GEN hw/isa/trace.c GEN hw/mem/trace.c GEN hw/misc/trace.c GEN hw/misc/macio/trace.c GEN hw/net/trace.c GEN hw/nvram/trace.c GEN hw/pci/trace.c GEN hw/pci-host/trace.c GEN hw/ppc/trace.c GEN hw/rdma/trace.c GEN hw/rdma/vmw/trace.c GEN hw/s390x/trace.c GEN hw/scsi/trace.c GEN hw/sd/trace.c GEN hw/sparc/trace.c GEN hw/sparc64/trace.c GEN hw/timer/trace.c GEN hw/tpm/trace.c GEN hw/usb/trace.c GEN hw/vfio/trace.c GEN hw/virtio/trace.c GEN hw/watchdog/trace.c GEN hw/xen/trace.c GEN io/trace.c GEN linux-user/trace.c GEN migration/trace.c GEN nbd/trace.c GEN net/trace.c GEN qapi/trace.c GEN qom/trace.c GEN scsi/trace.c GEN target/arm/trace.c GEN target/i386/trace.c GEN target/mips/trace.c GEN target/ppc/trace.c GEN target/s390x/trace.c GEN target/sparc/trace.c GEN ui/trace.c GEN util/trace.c GEN config-all-devices.mak CC tests/qemu-iotests/socket_scm_helper.o CC qapi/qapi-builtin-types.o CC qapi/qapi-types.o CC qapi/qapi-types-block-core.o CC qapi/qapi-types-char.o CC qapi/qapi-types-block.o GEN qga/qapi-generated/qapi-gen CC qapi/qapi-types-common.o CC qapi/qapi-types-crypto.o CC qapi/qapi-types-introspect.o CC qapi/qapi-types-job.o CC qapi/qapi-types-migration.o CC qapi/qapi-types-misc.o CC qapi/qapi-types-net.o CC qapi/qapi-types-rocker.o CC qapi/qapi-types-run-state.o CC qapi/qapi-types-sockets.o CC qapi/qapi-types-tpm.o CC qapi/qapi-types-trace.o CC qapi/qapi-types-transaction.o CC qapi/qapi-types-ui.o CC qapi/qapi-builtin-visit.o CC qapi/qapi-visit.o CC qapi/qapi-visit-block-core.o CC qapi/qapi-visit-block.o CC qapi/qapi-visit-char.o CC qapi/qapi-visit-common.o CC qapi/qapi-visit-crypto.o CC qapi/qapi-visit-introspect.o CC qapi/qapi-visit-job.o CC qapi/qapi-visit-migration.o CC qapi/qapi-visit-misc.o CC qapi/qapi-visit-net.o CC qapi/qapi-visit-rocker.o CC qapi/qapi-visit-run-state.o CC qapi/qapi-visit-sockets.o CC qapi/qapi-visit-tpm.o CC qapi/qapi-visit-trace.o CC qapi/qapi-visit-transaction.o CC qapi/qapi-visit-ui.o CC qapi/qapi-events.o CC qapi/qapi-events-block-core.o CC qapi/qapi-events-block.o CC qapi/qapi-events-char.o CC qapi/qapi-events-common.o CC qapi/qapi-events-crypto.o CC qapi/qapi-events-introspect.o CC qapi/qapi-events-job.o CC qapi/qapi-events-migration.o CC qapi/qapi-events-misc.o CC qapi/qapi-events-net.o CC qapi/qapi-events-rocker.o CC qapi/qapi-events-run-state.o CC qapi/qapi-events-sockets.o CC qapi/qapi-events-tpm.o CC qapi/qapi-events-trace.o CC qapi/qapi-events-transaction.o CC qapi/qapi-events-ui.o CC qapi/qapi-introspect.o CC qapi/qapi-visit-core.o CC qapi/qapi-dealloc-visitor.o CC qapi/qobject-input-visitor.o CC qapi/qobject-output-visitor.o CC qapi/qmp-registry.o CC qapi/qmp-dispatch.o CC qapi/string-input-visitor.o CC qapi/string-output-visitor.o CC qapi/opts-visitor.o CC qapi/qapi-clone-visitor.o CC qapi/qmp-event.o CC qapi/qapi-util.o CC qobject/qnull.o CC qobject/qnum.o CC qobject/qstring.o CC qobject/qdict.o CC qobject/qlist.o CC qobject/qbool.o CC qobject/qlit.o CC qobject/qjson.o CC qobject/qobject.o CC qobject/json-lexer.o CC qobject/json-streamer.o CC qobject/json-parser.o CC qobject/block-qdict.o CC trace/control.o CC trace/qmp.o CC util/osdep.o CC util/cutils.o CC util/unicode.o CC util/qemu-timer-common.o CC util/bufferiszero.o CC util/lockcnt.o CC util/aiocb.o CC util/async.o CC util/aio-wait.o CC util/thread-pool.o CC util/qemu-timer.o CC util/main-loop.o CC util/iohandler.o CC util/aio-posix.o CC util/compatfd.o CC util/event_notifier-posix.o CC util/mmap-alloc.o CC util/oslib-posix.o CC util/qemu-openpty.o CC util/qemu-thread-posix.o CC util/memfd.o CC util/envlist.o CC util/path.o CC util/host-utils.o CC util/module.o CC util/bitmap.o CC util/hbitmap.o CC util/bitops.o CC util/fifo8.o CC util/acl.o CC util/cacheinfo.o CC util/error.o CC util/id.o CC util/qemu-error.o CC util/iov.o CC util/qemu-config.o CC util/qemu-sockets.o CC util/uri.o CC util/notify.o CC util/qemu-option.o CC util/qemu-progress.o CC util/keyval.o CC util/hexdump.o CC util/uuid.o CC util/crc32c.o CC util/getauxval.o CC util/throttle.o CC util/readline.o CC util/rcu.o CC util/qemu-coroutine.o CC util/qemu-coroutine-lock.o CC util/qemu-coroutine-io.o CC util/qemu-coroutine-sleep.o CC util/coroutine-ucontext.o CC util/buffer.o CC util/timed-average.o CC util/base64.o CC util/log.o CC util/pagesize.o CC util/qdist.o CC util/qht.o CC util/qsp.o CC util/range.o CC util/stats64.o CC util/systemd.o CC util/iova-tree.o CC util/vfio-helpers.o CC util/drm.o CC trace-root.o CC accel/kvm/trace.o CC audio/trace.o CC accel/tcg/trace.o CC block/trace.o CC chardev/trace.o CC crypto/trace.o CC hw/9pfs/trace.o CC hw/acpi/trace.o CC hw/alpha/trace.o CC hw/arm/trace.o CC hw/audio/trace.o CC hw/block/trace.o CC hw/block/dataplane/trace.o CC hw/char/trace.o CC hw/display/trace.o CC hw/dma/trace.o CC hw/hppa/trace.o CC hw/i2c/trace.o CC hw/i386/trace.o CC hw/i386/xen/trace.o CC hw/ide/trace.o CC hw/input/trace.o CC hw/intc/trace.o CC hw/isa/trace.o CC hw/mem/trace.o CC hw/misc/trace.o CC hw/misc/macio/trace.o CC hw/net/trace.o CC hw/nvram/trace.o CC hw/pci/trace.o CC hw/pci-host/trace.o CC hw/ppc/trace.o CC hw/rdma/trace.o CC hw/rdma/vmw/trace.o CC hw/s390x/trace.o CC hw/scsi/trace.o CC hw/sd/trace.o CC hw/sparc/trace.o CC hw/sparc64/trace.o CC hw/timer/trace.o CC hw/usb/trace.o CC hw/tpm/trace.o CC hw/vfio/trace.o CC hw/virtio/trace.o CC hw/watchdog/trace.o CC hw/xen/trace.o CC io/trace.o CC linux-user/trace.o CC migration/trace.o CC nbd/trace.o CC net/trace.o CC qapi/trace.o CC qom/trace.o CC scsi/trace.o CC target/arm/trace.o CC target/i386/trace.o CC target/mips/trace.o CC target/ppc/trace.o CC target/s390x/trace.o CC target/sparc/trace.o CC ui/trace.o CC util/trace.o CC crypto/pbkdf-stub.o CC stubs/arch-query-cpu-def.o CC stubs/arch-query-cpu-model-expansion.o CC stubs/arch-query-cpu-model-comparison.o CC stubs/arch-query-cpu-model-baseline.o CC stubs/bdrv-next-monitor-owned.o CC stubs/blk-commit-all.o CC stubs/blockdev-close-all-bdrv-states.o CC stubs/clock-warp.o CC stubs/cpu-get-clock.o CC stubs/cpu-get-icount.o CC stubs/dump.o CC stubs/error-printf.o CC stubs/gdbstub.o CC stubs/fdset.o CC stubs/get-vm-name.o CC stubs/iothread.o CC stubs/iothread-lock.o CC stubs/is-daemonized.o CC stubs/linux-aio.o CC stubs/machine-init-done.o CC stubs/migr-blocker.o CC stubs/change-state-handler.o CC stubs/monitor.o CC stubs/notify-event.o CC stubs/qtest.o CC stubs/replay.o CC stubs/runstate-check.o CC stubs/set-fd-handler.o CC stubs/slirp.o CC stubs/sysbus.o CC stubs/tpm.o CC stubs/trace-control.o CC stubs/uuid.o CC stubs/vm-stop.o CC stubs/vmstate.o CC stubs/qmp_memory_device.o CC stubs/target-monitor-defs.o CC stubs/target-get-monitor-def.o CC stubs/pc_madt_cpu_entry.o CC stubs/vmgenid.o CC stubs/xen-common.o CC stubs/xen-hvm.o CC stubs/pci-host-piix.o CC stubs/ram-block.o CC stubs/ramfb.o CC contrib/ivshmem-client/ivshmem-client.o CC contrib/ivshmem-client/main.o CC contrib/ivshmem-server/ivshmem-server.o CC contrib/ivshmem-server/main.o CC qemu-nbd.o CC block.o CC blockjob.o CC job.o CC qemu-io-cmds.o CC replication.o CC block/raw-format.o CC block/qcow.o CC block/vdi.o CC block/vmdk.o CC block/cloop.o CC block/bochs.o CC block/vpc.o CC block/vvfat.o CC block/dmg.o CC block/qcow2.o CC block/qcow2-refcount.o CC block/qcow2-cluster.o CC block/qcow2-snapshot.o CC block/qcow2-cache.o CC block/qcow2-bitmap.o CC block/qed.o CC block/qed-l2-cache.o CC block/qed-table.o CC block/qed-cluster.o CC block/qed-check.o CC block/vhdx.o CC block/vhdx-endian.o CC block/vhdx-log.o CC block/quorum.o CC block/parallels.o CC block/blkdebug.o CC block/blkverify.o CC block/blkreplay.o CC block/blklogwrites.o CC block/block-backend.o CC block/snapshot.o CC block/qapi.o CC block/file-posix.o CC block/linux-aio.o CC block/null.o CC block/mirror.o CC block/commit.o CC block/io.o CC block/create.o CC block/throttle-groups.o CC block/nvme.o CC block/nbd.o CC block/nbd-client.o CC block/sheepdog.o CC block/accounting.o CC block/dirty-bitmap.o CC block/write-threshold.o CC block/backup.o CC block/replication.o CC block/throttle.o CC block/copy-on-read.o CC block/crypto.o CC nbd/server.o CC nbd/client.o CC nbd/common.o CC scsi/utils.o CC scsi/pr-manager.o CC scsi/pr-manager-helper.o CC block/dmg-bz2.o CC crypto/init.o CC crypto/hash.o CC crypto/hash-nettle.o CC crypto/hmac.o CC crypto/hmac-nettle.o CC crypto/aes.o CC crypto/desrfb.o CC crypto/cipher.o CC crypto/tlscreds.o CC crypto/tlscredsanon.o CC crypto/tlscredspsk.o CC crypto/tlscredsx509.o CC crypto/tlssession.o CC crypto/secret.o CC crypto/pbkdf.o CC crypto/random-platform.o CC crypto/pbkdf-nettle.o CC crypto/ivgen.o CC crypto/ivgen-essiv.o CC crypto/ivgen-plain.o CC crypto/ivgen-plain64.o CC crypto/afsplit.o CC crypto/xts.o CC crypto/block.o CC crypto/block-qcow.o CC crypto/block-luks.o CC io/channel-buffer.o CC io/channel.o CC io/channel-command.o CC io/channel-file.o CC io/channel-socket.o CC io/channel-tls.o CC io/channel-watch.o CC io/channel-websock.o CC io/channel-util.o CC io/net-listener.o CC io/dns-resolver.o CC io/task.o CC qom/object.o CC qom/container.o CC qom/qom-qobject.o CC qom/object_interfaces.o GEN qemu-img-cmds.h CC qemu-io.o CC qemu-edid.o CC hw/display/edid-generate.o CC scsi/qemu-pr-helper.o CC qemu-bridge-helper.o CC blockdev.o CC blockdev-nbd.o CC bootdevice.o CC iothread.o CC job-qmp.o CC qdev-monitor.o CC device-hotplug.o CC os-posix.o CC bt-host.o CC bt-vhci.o CC dma-helpers.o CC vl.o CC tpm.o CC device_tree.o CC qapi/qapi-commands.o CC qapi/qapi-commands-block-core.o CC qapi/qapi-commands-block.o CC qapi/qapi-commands-char.o CC qapi/qapi-commands-common.o CC qapi/qapi-commands-crypto.o CC qapi/qapi-commands-introspect.o CC qapi/qapi-commands-job.o CC qapi/qapi-commands-migration.o CC qapi/qapi-commands-misc.o CC qapi/qapi-commands-net.o CC qapi/qapi-commands-rocker.o CC qapi/qapi-commands-run-state.o CC qapi/qapi-commands-tpm.o CC qapi/qapi-commands-sockets.o CC qapi/qapi-commands-trace.o CC qapi/qapi-commands-transaction.o CC qapi/qapi-commands-ui.o CC qmp.o CC hmp.o CC cpus-common.o CC audio/audio.o CC audio/noaudio.o CC audio/wavaudio.o CC audio/mixeng.o CC audio/spiceaudio.o CC audio/wavcapture.o CC backends/rng.o CC backends/rng-egd.o CC backends/rng-random.o CC backends/tpm.o CC backends/hostmem.o CC backends/hostmem-ram.o CC backends/hostmem-file.o CC backends/cryptodev.o CC backends/cryptodev-builtin.o CC backends/cryptodev-vhost.o CC backends/cryptodev-vhost-user.o CC backends/hostmem-memfd.o CC block/stream.o CC chardev/msmouse.o CC chardev/wctablet.o CC chardev/testdev.o CC chardev/spice.o CC disas/arm.o CC disas/i386.o CC fsdev/qemu-fsdev-dummy.o CC fsdev/qemu-fsdev-opts.o CC fsdev/qemu-fsdev-throttle.o CC hw/acpi/core.o CC hw/acpi/piix4.o CC hw/acpi/pcihp.o CC hw/acpi/ich9.o CC hw/acpi/tco.o CC hw/acpi/cpu_hotplug.o CC hw/acpi/memory_hotplug.o CC hw/acpi/cpu.o CC hw/acpi/nvdimm.o CC hw/acpi/vmgenid.o CC hw/acpi/acpi_interface.o CC hw/acpi/bios-linker-loader.o CC hw/acpi/aml-build.o CC hw/acpi/ipmi.o CC hw/acpi/acpi-stub.o CC hw/acpi/ipmi-stub.o CC hw/audio/sb16.o CC hw/audio/es1370.o CC hw/audio/ac97.o CC hw/audio/fmopl.o CC hw/audio/adlib.o CC hw/audio/gus.o CC hw/audio/gusemu_hal.o CC hw/audio/gusemu_mixer.o CC hw/audio/cs4231a.o CC hw/audio/intel-hda.o CC hw/audio/hda-codec.o CC hw/audio/pcspk.o CC hw/audio/wm8750.o CC hw/audio/pl041.o CC hw/audio/lm4549.o CC hw/audio/marvell_88w8618.o CC hw/audio/soundhw.o CC hw/block/block.o CC hw/block/cdrom.o CC hw/block/hd-geometry.o CC hw/block/fdc.o CC hw/block/m25p80.o CC hw/block/nand.o CC hw/block/pflash_cfi01.o CC hw/block/pflash_cfi02.o CC hw/block/xen_disk.o CC hw/block/ecc.o CC hw/block/onenand.o CC hw/block/nvme.o CC hw/bt/core.o CC hw/bt/l2cap.o CC hw/bt/sdp.o CC hw/bt/hci.o CC hw/bt/hid.o CC hw/bt/hci-csr.o CC hw/char/ipoctal232.o CC hw/char/nrf51_uart.o CC hw/char/parallel.o CC hw/char/parallel-isa.o CC hw/char/pl011.o CC hw/char/serial.o CC hw/char/serial-isa.o CC hw/char/serial-pci.o CC hw/char/virtio-console.o CC hw/char/xen_console.o CC hw/char/cadence_uart.o CC hw/char/cmsdk-apb-uart.o CC hw/char/debugcon.o CC hw/char/imx_serial.o CC hw/core/qdev.o CC hw/core/qdev-properties.o CC hw/core/bus.o CC hw/core/reset.o CC hw/core/qdev-fw.o CC hw/core/fw-path-provider.o CC hw/core/irq.o CC hw/core/hotplug.o CC hw/core/nmi.o CC hw/core/stream.o CC hw/core/ptimer.o CC hw/core/sysbus.o CC hw/core/machine.o CC hw/core/loader.o CC hw/core/qdev-properties-system.o CC hw/core/register.o CC hw/core/or-irq.o CC hw/core/split-irq.o CC hw/core/platform-bus.o CC hw/core/generic-loader.o CC hw/core/null-machine.o CC hw/cpu/core.o CC hw/display/ramfb.o CC hw/display/ramfb-standalone.o CC hw/display/ads7846.o CC hw/display/cirrus_vga.o CC hw/display/cirrus_vga_isa.o CC hw/display/pl110.o CC hw/display/sii9022.o CC hw/display/ssd0303.o CC hw/display/ssd0323.o CC hw/display/xenfb.o CC hw/display/vga-pci.o CC hw/display/edid-region.o CC hw/display/vga-isa.o CC hw/display/vmware_vga.o CC hw/display/bochs-display.o CC hw/display/blizzard.o CC hw/display/exynos4210_fimd.o CC hw/display/framebuffer.o CC hw/display/tc6393xb.o CC hw/display/qxl.o CC hw/display/qxl-logger.o CC hw/display/qxl-render.o CC hw/dma/pl080.o CC hw/dma/pl330.o CC hw/dma/i8257.o CC hw/dma/xilinx_axidma.o CC hw/dma/xlnx-zynq-devcfg.o CC hw/dma/xlnx-zdma.o CC hw/gpio/max7310.o CC hw/gpio/pl061.o CC hw/gpio/zaurus.o CC hw/gpio/gpio_key.o CC hw/i2c/core.o CC hw/i2c/smbus.o CC hw/i2c/smbus_eeprom.o CC hw/i2c/i2c-ddc.o CC hw/i2c/versatile_i2c.o CC hw/i2c/smbus_ich9.o CC hw/i2c/pm_smbus.o CC hw/i2c/bitbang_i2c.o CC hw/i2c/exynos4210_i2c.o CC hw/i2c/imx_i2c.o CC hw/i2c/aspeed_i2c.o CC hw/ide/core.o CC hw/ide/atapi.o CC hw/ide/qdev.o CC hw/ide/pci.o CC hw/ide/isa.o CC hw/ide/piix.o CC hw/ide/microdrive.o CC hw/ide/ahci.o CC hw/ide/ich.o CC hw/ide/ahci-allwinner.o CC hw/input/hid.o CC hw/input/lm832x.o CC hw/input/pckbd.o CC hw/input/pl050.o CC hw/input/ps2.o CC hw/input/stellaris_input.o CC hw/input/tsc2005.o CC hw/input/virtio-input.o CC hw/input/virtio-input-hid.o CC hw/input/virtio-input-host.o CC hw/intc/i8259_common.o CC hw/intc/i8259.o CC hw/intc/pl190.o CC hw/intc/xlnx-pmu-iomod-intc.o CC hw/intc/xlnx-zynqmp-ipi.o CC hw/intc/imx_avic.o CC hw/intc/imx_gpcv2.o CC hw/intc/realview_gic.o CC hw/intc/ioapic_common.o CC hw/intc/arm_gic_common.o CC hw/intc/arm_gic.o CC hw/intc/arm_gicv2m.o CC hw/intc/arm_gicv3_common.o CC hw/intc/arm_gicv3.o CC hw/intc/arm_gicv3_dist.o CC hw/intc/arm_gicv3_redist.o CC hw/intc/arm_gicv3_its_common.o CC hw/intc/intc.o CC hw/ipack/ipack.o CC hw/ipack/tpci200.o CC hw/ipmi/ipmi.o CC hw/ipmi/ipmi_bmc_sim.o CC hw/ipmi/ipmi_bmc_extern.o CC hw/ipmi/isa_ipmi_kcs.o CC hw/ipmi/isa_ipmi_bt.o CC hw/isa/isa-bus.o CC hw/isa/isa-superio.o CC hw/isa/apm.o CC hw/mem/pc-dimm.o CC hw/mem/memory-device.o CC hw/mem/nvdimm.o CC hw/misc/applesmc.o CC hw/misc/max111x.o CC hw/misc/tmp105.o CC hw/misc/tmp421.o CC hw/misc/debugexit.o CC hw/misc/sga.o CC hw/misc/pc-testdev.o CC hw/misc/pci-testdev.o CC hw/misc/edu.o CC hw/misc/pca9552.o CC hw/misc/unimp.o CC hw/misc/vmcoreinfo.o CC hw/misc/arm_l2x0.o CC hw/misc/arm_integrator_debug.o CC hw/misc/a9scu.o CC hw/misc/arm11scu.o CC hw/net/xen_nic.o CC hw/net/ne2000.o CC hw/net/eepro100.o CC hw/net/pcnet-pci.o CC hw/net/pcnet.o CC hw/net/e1000.o CC hw/net/e1000x_common.o CC hw/net/net_tx_pkt.o CC hw/net/net_rx_pkt.o CC hw/net/e1000e.o CC hw/net/e1000e_core.o CC hw/net/rtl8139.o CC hw/net/vmxnet3.o CC hw/net/smc91c111.o CC hw/net/lan9118.o CC hw/net/ne2000-isa.o CC hw/net/xgmac.o CC hw/net/xilinx_axienet.o CC hw/net/allwinner_emac.o CC hw/net/imx_fec.o CC hw/net/cadence_gem.o CC hw/net/stellaris_enet.o CC hw/net/ftgmac100.o CC hw/net/rocker/rocker.o CC hw/net/rocker/rocker_fp.o CC hw/net/rocker/rocker_desc.o CC hw/net/rocker/rocker_world.o CC hw/net/rocker/rocker_of_dpa.o CC hw/net/can/can_sja1000.o CC hw/net/can/can_kvaser_pci.o CC hw/net/can/can_pcm3680_pci.o CC hw/net/can/can_mioe3680_pci.o CC hw/nvram/eeprom93xx.o CC hw/nvram/fw_cfg.o CC hw/nvram/chrp_nvram.o CC hw/pci-bridge/pci_bridge_dev.o CC hw/pci-bridge/pcie_root_port.o CC hw/pci-bridge/gen_pcie_root_port.o CC hw/pci-bridge/pcie_pci_bridge.o CC hw/pci-bridge/pci_expander_bridge.o CC hw/pci-bridge/xio3130_upstream.o CC hw/pci-bridge/xio3130_downstream.o CC hw/pci-bridge/ioh3420.o CC hw/pci-bridge/i82801b11.o CC hw/pci-host/pam.o CC hw/pci-host/versatile.o CC hw/pci-host/piix.o CC hw/pci-host/q35.o CC hw/pci-host/gpex.o CC hw/pci-host/designware.o CC hw/pci/pci.o CC hw/pci/pci_bridge.o CC hw/pci/msix.o CC hw/pci/msi.o CC hw/pci/shpc.o CC hw/pci/pci_host.o CC hw/pci/slotid_cap.o CC hw/pci/pcie_host.o CC hw/pci/pcie.o CC hw/pci/pcie_aer.o CC hw/pci/pcie_port.o CC hw/pci/pci-stub.o CC hw/pcmcia/pcmcia.o CC hw/scsi/scsi-disk.o CC hw/scsi/scsi-generic.o CC hw/scsi/scsi-bus.o CC hw/scsi/lsi53c895a.o CC hw/scsi/mptsas.o CC hw/scsi/mptconfig.o CC hw/scsi/mptendian.o CC hw/scsi/megasas.o CC hw/scsi/vmw_pvscsi.o CC hw/scsi/esp.o CC hw/scsi/esp-pci.o CC hw/sd/pl181.o CC hw/sd/ssi-sd.o CC hw/sd/sd.o CC hw/sd/core.o CC hw/sd/sdmmc-internal.o CC hw/sd/sdhci.o CC hw/smbios/smbios.o CC hw/smbios/smbios_type_38.o CC hw/smbios/smbios-stub.o CC hw/smbios/smbios_type_38-stub.o CC hw/ssi/pl022.o CC hw/ssi/ssi.o CC hw/ssi/xilinx_spips.o CC hw/ssi/aspeed_smc.o CC hw/ssi/stm32f2xx_spi.o CC hw/ssi/mss-spi.o CC hw/timer/arm_timer.o CC hw/timer/arm_mptimer.o CC hw/timer/armv7m_systick.o CC hw/timer/a9gtimer.o CC hw/timer/cadence_ttc.o CC hw/timer/ds1338.o CC hw/timer/hpet.o CC hw/timer/i8254_common.o CC hw/timer/i8254.o CC hw/timer/pl031.o CC hw/timer/twl92230.o CC hw/timer/imx_epit.o CC hw/timer/imx_gpt.o CC hw/timer/xlnx-zynqmp-rtc.o CC hw/timer/stm32f2xx_timer.o CC hw/timer/aspeed_timer.o CC hw/timer/cmsdk-apb-timer.o CC hw/timer/cmsdk-apb-dualtimer.o CC hw/timer/mss-timer.o CC hw/tpm/tpm_util.o CC hw/tpm/tpm_tis.o CC hw/tpm/tpm_crb.o CC hw/tpm/tpm_passthrough.o CC hw/tpm/tpm_emulator.o CC hw/usb/core.o CC hw/usb/combined-packet.o CC hw/usb/bus.o CC hw/usb/libhw.o CC hw/usb/desc.o CC hw/usb/desc-msos.o CC hw/usb/hcd-uhci.o CC hw/usb/hcd-ohci.o CC hw/usb/hcd-ehci.o CC hw/usb/hcd-ehci-pci.o CC hw/usb/hcd-ehci-sysbus.o CC hw/usb/hcd-xhci.o CC hw/usb/hcd-xhci-nec.o CC hw/usb/hcd-musb.o CC hw/usb/dev-hub.o CC hw/usb/dev-hid.o CC hw/usb/dev-wacom.o CC hw/usb/dev-storage.o CC hw/usb/dev-uas.o CC hw/usb/dev-audio.o CC hw/usb/dev-serial.o CC hw/usb/dev-network.o CC hw/usb/dev-bluetooth.o CC hw/usb/dev-smartcard-reader.o CC hw/usb/ccid-card-passthru.o CC hw/usb/ccid-card-emulated.o CC hw/usb/dev-mtp.o CC hw/usb/host-stub.o CC hw/virtio/virtio-bus.o CC hw/virtio/virtio-rng.o CC hw/virtio/virtio-pci.o CC hw/virtio/virtio-mmio.o CC hw/virtio/vhost-stub.o CC hw/watchdog/watchdog.o CC hw/watchdog/cmsdk-apb-watchdog.o CC hw/watchdog/wdt_i6300esb.o CC hw/watchdog/wdt_ib700.o CC hw/watchdog/wdt_aspeed.o CC hw/xen/xen_backend.o CC hw/xen/xen_devconfig.o CC hw/xen/xen_pvdev.o CC hw/xen/xen-common.o CC migration/migration.o CC migration/socket.o CC migration/fd.o CC migration/exec.o CC migration/tls.o CC migration/channel.o CC migration/savevm.o CC migration/colo.o CC migration/colo-failover.o CC migration/vmstate.o CC migration/vmstate-types.o CC migration/page_cache.o CC migration/qemu-file.o CC migration/global_state.o CC migration/qemu-file-channel.o CC migration/xbzrle.o CC migration/postcopy-ram.o CC migration/qjson.o CC migration/block-dirty-bitmap.o CC migration/rdma.o CC migration/block.o CC net/net.o CC net/queue.o CC net/checksum.o CC net/util.o CC net/hub.o CC net/socket.o CC net/dump.o CC net/eth.o CC net/l2tpv3.o CC net/vhost-user.o CC net/slirp.o CC net/filter.o CC net/filter-buffer.o CC net/filter-mirror.o CC net/colo-compare.o CC net/colo.o CC net/filter-rewriter.o CC net/filter-replay.o CC net/tap.o CC net/tap-linux.o CC net/can/can_core.o CC net/can/can_host.o CC net/can/can_socketcan.o CC qom/cpu.o CC replay/replay.o CC replay/replay-internal.o CC replay/replay-events.o CC replay/replay-time.o CC replay/replay-input.o CC replay/replay-char.o CC replay/replay-snapshot.o CC replay/replay-net.o CC replay/replay-audio.o CC slirp/cksum.o CC slirp/if.o CC slirp/ip_icmp.o CC slirp/ip6_icmp.o CC slirp/ip6_input.o CC slirp/ip6_output.o CC slirp/ip_input.o CC slirp/ip_output.o CC slirp/dnssearch.o CC slirp/dhcpv6.o CC slirp/slirp.o CC slirp/mbuf.o CC slirp/misc.o CC slirp/sbuf.o CC slirp/socket.o CC slirp/tcp_input.o CC slirp/tcp_output.o CC slirp/tcp_timer.o CC slirp/tcp_subr.o CC slirp/udp.o CC slirp/udp6.o CC slirp/bootp.o CC slirp/tftp.o CC slirp/arp_table.o CC slirp/ndp_table.o CC slirp/ncsi.o CC ui/keymaps.o CC ui/console.o CC ui/cursor.o CC ui/qemu-pixman.o CC ui/input.o CC ui/input-keymap.o CC ui/input-legacy.o CC ui/input-linux.o CC ui/spice-core.o CC ui/spice-input.o CC ui/spice-display.o CC ui/vnc.o CC ui/vnc-enc-zlib.o CC ui/vnc-enc-hextile.o CC ui/vnc-enc-tight.o CC ui/vnc-palette.o CC ui/vnc-enc-zrle.o CC ui/vnc-auth-vencrypt.o CC ui/vnc-ws.o CC ui/vnc-jobs.o VERT ui/shader/texture-blit-vert.h VERT ui/shader/texture-blit-flip-vert.h CC ui/console-gl.o FRAG ui/shader/texture-blit-frag.h CC ui/egl-helpers.o CC ui/egl-context.o CC ui/egl-headless.o CC audio/ossaudio.o CC ui/sdl.o CC ui/sdl_zoom.o CC ui/x_keymap.o CC ui/curses.o CC chardev/char.o CC chardev/char-fd.o CC chardev/char-fe.o CC chardev/char-file.o CC chardev/char-io.o CC chardev/char-mux.o CC chardev/char-null.o CC chardev/char-parallel.o CC chardev/char-pipe.o CC chardev/char-pty.o CC chardev/char-ringbuf.o CC chardev/char-serial.o CC chardev/char-socket.o CC chardev/char-stdio.o CC chardev/char-udp.o LINK tests/qemu-iotests/socket_scm_helper CC qga/commands.o CC qga/guest-agent-command-state.o CC qga/main.o AS optionrom/multiboot.o CC qga/commands-posix.o AS optionrom/linuxboot.o CC optionrom/linuxboot_dma.o AS optionrom/kvmvapic.o CC qga/channel-posix.o BUILD optionrom/multiboot.img CC qga/qapi-generated/qga-qapi-types.o BUILD optionrom/linuxboot.img BUILD optionrom/linuxboot_dma.img BUILD optionrom/kvmvapic.img BUILD optionrom/multiboot.raw CC qga/qapi-generated/qga-qapi-visit.o CC qga/qapi-generated/qga-qapi-commands.o BUILD optionrom/linuxboot.raw BUILD optionrom/linuxboot_dma.raw AR libqemuutil.a BUILD optionrom/kvmvapic.raw CC qemu-img.o SIGN optionrom/multiboot.bin SIGN optionrom/linuxboot.bin SIGN optionrom/linuxboot_dma.bin CC ui/shader.o SIGN optionrom/kvmvapic.bin LINK qemu-ga LINK ivshmem-client LINK ivshmem-server LINK qemu-nbd LINK qemu-io LINK qemu-edid LINK scsi/qemu-pr-helper LINK qemu-bridge-helper GEN x86_64-softmmu/hmp-commands-info.h GEN x86_64-softmmu/hmp-commands.h GEN x86_64-softmmu/config-target.h GEN aarch64-softmmu/hmp-commands.h GEN aarch64-softmmu/hmp-commands-info.h GEN aarch64-softmmu/config-target.h CC x86_64-softmmu/exec.o CC x86_64-softmmu/tcg/tcg-op-vec.o CC x86_64-softmmu/tcg/tcg-op.o CC x86_64-softmmu/tcg/tcg.o CC x86_64-softmmu/tcg/tcg-op-gvec.o CC x86_64-softmmu/tcg/tcg-common.o CC aarch64-softmmu/exec.o CC x86_64-softmmu/tcg/optimize.o CC x86_64-softmmu/fpu/softfloat.o CC aarch64-softmmu/tcg/tcg.o CC x86_64-softmmu/disas.o GEN x86_64-softmmu/gdbstub-xml.c LINK qemu-img CC x86_64-softmmu/arch_init.o CC x86_64-softmmu/cpus.o CC x86_64-softmmu/monitor.o CC x86_64-softmmu/gdbstub.o CC x86_64-softmmu/balloon.o CC x86_64-softmmu/ioport.o CC x86_64-softmmu/numa.o CC x86_64-softmmu/qtest.o CC x86_64-softmmu/memory.o CC x86_64-softmmu/memory_mapping.o CC x86_64-softmmu/dump.o CC x86_64-softmmu/win_dump.o CC x86_64-softmmu/migration/ram.o CC x86_64-softmmu/accel/accel.o CC x86_64-softmmu/accel/kvm/kvm-all.o CC aarch64-softmmu/tcg/tcg-op.o CC aarch64-softmmu/tcg/tcg-op-vec.o CC x86_64-softmmu/accel/stubs/hax-stub.o CC aarch64-softmmu/tcg/tcg-op-gvec.o CC x86_64-softmmu/accel/stubs/hvf-stub.o CC x86_64-softmmu/accel/stubs/whpx-stub.o CC x86_64-softmmu/accel/tcg/tcg-all.o CC x86_64-softmmu/accel/tcg/cputlb.o CC x86_64-softmmu/accel/tcg/tcg-runtime.o CC aarch64-softmmu/tcg/tcg-common.o CC x86_64-softmmu/accel/tcg/tcg-runtime-gvec.o CC x86_64-softmmu/accel/tcg/cpu-exec.o CC x86_64-softmmu/accel/tcg/cpu-exec-common.o CC x86_64-softmmu/accel/tcg/translate-all.o CC x86_64-softmmu/accel/tcg/translator.o CC aarch64-softmmu/tcg/optimize.o CC aarch64-softmmu/fpu/softfloat.o CC x86_64-softmmu/hw/block/virtio-blk.o CC aarch64-softmmu/disas.o GEN aarch64-softmmu/gdbstub-xml.c CC aarch64-softmmu/arch_init.o CC x86_64-softmmu/hw/block/vhost-user-blk.o CC x86_64-softmmu/hw/block/dataplane/virtio-blk.o CC aarch64-softmmu/cpus.o CC x86_64-softmmu/hw/char/virtio-serial-bus.o CC aarch64-softmmu/monitor.o CC aarch64-softmmu/gdbstub.o CC x86_64-softmmu/hw/display/vga.o CC aarch64-softmmu/balloon.o CC aarch64-softmmu/ioport.o CC aarch64-softmmu/numa.o CC aarch64-softmmu/qtest.o CC aarch64-softmmu/memory.o CC aarch64-softmmu/memory_mapping.o CC aarch64-softmmu/dump.o CC x86_64-softmmu/hw/display/virtio-gpu.o CC aarch64-softmmu/migration/ram.o CC aarch64-softmmu/accel/accel.o CC x86_64-softmmu/hw/display/virtio-gpu-3d.o CC aarch64-softmmu/accel/stubs/hax-stub.o CC aarch64-softmmu/accel/stubs/hvf-stub.o CC aarch64-softmmu/accel/stubs/whpx-stub.o CC aarch64-softmmu/accel/stubs/kvm-stub.o CC aarch64-softmmu/accel/tcg/tcg-all.o CC aarch64-softmmu/accel/tcg/cputlb.o CC x86_64-softmmu/hw/display/virtio-gpu-pci.o CC aarch64-softmmu/accel/tcg/tcg-runtime.o CC aarch64-softmmu/accel/tcg/tcg-runtime-gvec.o CC aarch64-softmmu/accel/tcg/cpu-exec.o CC aarch64-softmmu/accel/tcg/cpu-exec-common.o CC x86_64-softmmu/hw/display/virtio-vga.o CC x86_64-softmmu/hw/hyperv/hyperv.o CC aarch64-softmmu/accel/tcg/translate-all.o CC aarch64-softmmu/accel/tcg/translator.o CC x86_64-softmmu/hw/hyperv/hyperv_testdev.o CC aarch64-softmmu/hw/adc/stm32f2xx_adc.o CC x86_64-softmmu/hw/intc/apic.o CC aarch64-softmmu/hw/block/virtio-blk.o CC aarch64-softmmu/hw/block/vhost-user-blk.o CC x86_64-softmmu/hw/intc/apic_common.o CC x86_64-softmmu/hw/intc/ioapic.o CC aarch64-softmmu/hw/block/dataplane/virtio-blk.o CC x86_64-softmmu/hw/isa/lpc_ich9.o CC aarch64-softmmu/hw/char/exynos4210_uart.o CC aarch64-softmmu/hw/char/omap_uart.o CC aarch64-softmmu/hw/char/digic-uart.o CC aarch64-softmmu/hw/char/stm32f2xx_usart.o CC x86_64-softmmu/hw/misc/ivshmem.o CC x86_64-softmmu/hw/misc/pvpanic.o CC x86_64-softmmu/hw/net/virtio-net.o CC aarch64-softmmu/hw/char/bcm2835_aux.o CC x86_64-softmmu/hw/net/vhost_net.o CC aarch64-softmmu/hw/char/virtio-serial-bus.o CC x86_64-softmmu/hw/rdma/rdma_utils.o CC x86_64-softmmu/hw/rdma/rdma_backend.o CC x86_64-softmmu/hw/rdma/rdma_rm.o CC aarch64-softmmu/hw/cpu/arm11mpcore.o CC aarch64-softmmu/hw/cpu/realview_mpcore.o CC x86_64-softmmu/hw/rdma/vmw/pvrdma_dev_ring.o CC aarch64-softmmu/hw/cpu/a9mpcore.o CC aarch64-softmmu/hw/cpu/a15mpcore.o CC aarch64-softmmu/hw/display/omap_dss.o CC x86_64-softmmu/hw/rdma/vmw/pvrdma_cmd.o CC x86_64-softmmu/hw/rdma/vmw/pvrdma_qp_ops.o CC x86_64-softmmu/hw/rdma/vmw/pvrdma_main.o CC x86_64-softmmu/hw/scsi/virtio-scsi.o CC aarch64-softmmu/hw/display/omap_lcdc.o CC aarch64-softmmu/hw/display/pxa2xx_lcd.o CC x86_64-softmmu/hw/scsi/virtio-scsi-dataplane.o CC x86_64-softmmu/hw/scsi/vhost-scsi-common.o CC aarch64-softmmu/hw/display/bcm2835_fb.o CC x86_64-softmmu/hw/scsi/vhost-scsi.o CC aarch64-softmmu/hw/display/vga.o CC aarch64-softmmu/hw/display/virtio-gpu.o CC x86_64-softmmu/hw/scsi/vhost-user-scsi.o CC x86_64-softmmu/hw/timer/mc146818rtc.o CC x86_64-softmmu/hw/vfio/common.o CC x86_64-softmmu/hw/vfio/pci.o CC aarch64-softmmu/hw/display/virtio-gpu-3d.o CC x86_64-softmmu/hw/vfio/pci-quirks.o CC x86_64-softmmu/hw/vfio/display.o CC aarch64-softmmu/hw/display/virtio-gpu-pci.o CC aarch64-softmmu/hw/display/dpcd.o CC aarch64-softmmu/hw/display/xlnx_dp.o CC x86_64-softmmu/hw/vfio/platform.o CC aarch64-softmmu/hw/dma/xlnx_dpdma.o CC aarch64-softmmu/hw/dma/omap_dma.o CC x86_64-softmmu/hw/vfio/spapr.o CC aarch64-softmmu/hw/dma/soc_dma.o CC x86_64-softmmu/hw/virtio/virtio.o CC x86_64-softmmu/hw/virtio/virtio-balloon.o CC aarch64-softmmu/hw/dma/pxa2xx_dma.o CC aarch64-softmmu/hw/dma/bcm2835_dma.o CC x86_64-softmmu/hw/virtio/virtio-crypto.o CC x86_64-softmmu/hw/virtio/virtio-crypto-pci.o CC x86_64-softmmu/hw/virtio/vhost.o CC x86_64-softmmu/hw/virtio/vhost-backend.o CC aarch64-softmmu/hw/gpio/omap_gpio.o CC aarch64-softmmu/hw/gpio/imx_gpio.o CC aarch64-softmmu/hw/gpio/bcm2835_gpio.o CC x86_64-softmmu/hw/virtio/vhost-user.o CC x86_64-softmmu/hw/virtio/vhost-vsock.o CC x86_64-softmmu/hw/xen/xen-host-pci-device.o CC aarch64-softmmu/hw/i2c/omap_i2c.o CC x86_64-softmmu/hw/xen/xen_pt.o CC aarch64-softmmu/hw/input/pxa2xx_keypad.o CC x86_64-softmmu/hw/xen/xen_pt_config_init.o CC x86_64-softmmu/hw/xen/xen_pt_graphics.o CC x86_64-softmmu/hw/xen/xen_pt_msi.o CC aarch64-softmmu/hw/input/tsc210x.o CC x86_64-softmmu/hw/xen/xen_pt_load_rom.o CC aarch64-softmmu/hw/intc/armv7m_nvic.o CC x86_64-softmmu/hw/i386/multiboot.o CC x86_64-softmmu/hw/i386/pc.o CC x86_64-softmmu/hw/i386/pc_piix.o CC x86_64-softmmu/hw/i386/pc_q35.o CC x86_64-softmmu/hw/i386/pc_sysfw.o CC aarch64-softmmu/hw/intc/exynos4210_gic.o CC x86_64-softmmu/hw/i386/x86-iommu.o CC aarch64-softmmu/hw/intc/exynos4210_combiner.o CC aarch64-softmmu/hw/intc/omap_intc.o CC x86_64-softmmu/hw/i386/intel_iommu.o CC x86_64-softmmu/hw/i386/amd_iommu.o CC aarch64-softmmu/hw/intc/bcm2835_ic.o CC x86_64-softmmu/hw/i386/vmport.o CC x86_64-softmmu/hw/i386/vmmouse.o CC aarch64-softmmu/hw/intc/bcm2836_control.o CC aarch64-softmmu/hw/intc/allwinner-a10-pic.o CC aarch64-softmmu/hw/intc/aspeed_vic.o CC x86_64-softmmu/hw/i386/kvmvapic.o CC x86_64-softmmu/hw/i386/acpi-build.o CC x86_64-softmmu/hw/i386/../xenpv/xen_machine_pv.o CC aarch64-softmmu/hw/intc/arm_gicv3_cpuif.o CC x86_64-softmmu/hw/i386/kvm/clock.o CC aarch64-softmmu/hw/misc/ivshmem.o CC x86_64-softmmu/hw/i386/kvm/apic.o CC x86_64-softmmu/hw/i386/kvm/i8259.o CC x86_64-softmmu/hw/i386/kvm/ioapic.o CC x86_64-softmmu/hw/i386/kvm/i8254.o CC x86_64-softmmu/hw/i386/xen/xen_platform.o CC x86_64-softmmu/hw/i386/xen/xen_apic.o CC aarch64-softmmu/hw/misc/arm_sysctl.o CC x86_64-softmmu/hw/i386/xen/xen_pvdevice.o CC x86_64-softmmu/hw/i386/xen/xen-hvm.o CC x86_64-softmmu/hw/i386/xen/xen-mapcache.o CC x86_64-softmmu/target/i386/helper.o CC x86_64-softmmu/target/i386/cpu.o CC x86_64-softmmu/target/i386/gdbstub.o CC aarch64-softmmu/hw/misc/cbus.o CC x86_64-softmmu/target/i386/xsave_helper.o CC x86_64-softmmu/target/i386/translate.o CC x86_64-softmmu/target/i386/bpt_helper.o CC aarch64-softmmu/hw/misc/exynos4210_pmu.o CC x86_64-softmmu/target/i386/cc_helper.o CC x86_64-softmmu/target/i386/excp_helper.o CC x86_64-softmmu/target/i386/fpu_helper.o CC x86_64-softmmu/target/i386/int_helper.o CC aarch64-softmmu/hw/misc/exynos4210_clk.o CC aarch64-softmmu/hw/misc/exynos4210_rng.o CC x86_64-softmmu/target/i386/mem_helper.o CC aarch64-softmmu/hw/misc/imx_ccm.o CC aarch64-softmmu/hw/misc/imx31_ccm.o CC x86_64-softmmu/target/i386/misc_helper.o CC aarch64-softmmu/hw/misc/imx25_ccm.o CC x86_64-softmmu/target/i386/mpx_helper.o CC x86_64-softmmu/target/i386/seg_helper.o CC x86_64-softmmu/target/i386/smm_helper.o CC x86_64-softmmu/target/i386/svm_helper.o CC aarch64-softmmu/hw/misc/imx6_ccm.o CC aarch64-softmmu/hw/misc/imx6ul_ccm.o CC x86_64-softmmu/target/i386/machine.o CC x86_64-softmmu/target/i386/arch_memory_mapping.o CC aarch64-softmmu/hw/misc/imx6_src.o CC x86_64-softmmu/target/i386/arch_dump.o CC aarch64-softmmu/hw/misc/imx7_ccm.o CC x86_64-softmmu/target/i386/monitor.o CC x86_64-softmmu/target/i386/kvm.o CC x86_64-softmmu/target/i386/hyperv.o CC x86_64-softmmu/target/i386/sev.o CC aarch64-softmmu/hw/misc/imx2_wdt.o GEN trace/generated-helpers.c CC x86_64-softmmu/trace/control-target.o CC aarch64-softmmu/hw/misc/imx7_snvs.o CC aarch64-softmmu/hw/misc/imx7_gpr.o CC x86_64-softmmu/gdbstub-xml.o CC aarch64-softmmu/hw/misc/mst_fpga.o CC aarch64-softmmu/hw/misc/omap_clk.o CC aarch64-softmmu/hw/misc/omap_gpmc.o CC aarch64-softmmu/hw/misc/omap_l4.o CC aarch64-softmmu/hw/misc/omap_sdrc.o CC aarch64-softmmu/hw/misc/omap_tap.o CC aarch64-softmmu/hw/misc/bcm2835_mbox.o CC aarch64-softmmu/hw/misc/bcm2835_property.o CC aarch64-softmmu/hw/misc/bcm2835_rng.o CC aarch64-softmmu/hw/misc/zynq_slcr.o CC aarch64-softmmu/hw/misc/zynq-xadc.o CC aarch64-softmmu/hw/misc/stm32f2xx_syscfg.o CC aarch64-softmmu/hw/misc/mps2-fpgaio.o CC aarch64-softmmu/hw/misc/mps2-scc.o CC aarch64-softmmu/hw/misc/tz-mpc.o CC aarch64-softmmu/hw/misc/tz-msc.o CC x86_64-softmmu/trace/generated-helpers.o CC aarch64-softmmu/hw/misc/tz-ppc.o CC aarch64-softmmu/hw/misc/iotkit-secctl.o CC aarch64-softmmu/hw/misc/iotkit-sysctl.o CC aarch64-softmmu/hw/misc/iotkit-sysinfo.o CC aarch64-softmmu/hw/misc/auxbus.o CC aarch64-softmmu/hw/misc/aspeed_scu.o CC aarch64-softmmu/hw/misc/aspeed_sdmc.o CC aarch64-softmmu/hw/misc/msf2-sysreg.o CC aarch64-softmmu/hw/net/virtio-net.o CC aarch64-softmmu/hw/net/vhost_net.o CC aarch64-softmmu/hw/pcmcia/pxa2xx.o CC aarch64-softmmu/hw/rdma/rdma_utils.o LINK x86_64-softmmu/qemu-system-x86_64 CC aarch64-softmmu/hw/rdma/rdma_backend.o CC aarch64-softmmu/hw/rdma/rdma_rm.o CC aarch64-softmmu/hw/rdma/vmw/pvrdma_dev_ring.o CC aarch64-softmmu/hw/rdma/vmw/pvrdma_cmd.o CC aarch64-softmmu/hw/rdma/vmw/pvrdma_qp_ops.o CC aarch64-softmmu/hw/rdma/vmw/pvrdma_main.o CC aarch64-softmmu/hw/scsi/virtio-scsi.o CC aarch64-softmmu/hw/scsi/virtio-scsi-dataplane.o CC aarch64-softmmu/hw/scsi/vhost-scsi-common.o CC aarch64-softmmu/hw/scsi/vhost-scsi.o CC aarch64-softmmu/hw/scsi/vhost-user-scsi.o CC aarch64-softmmu/hw/sd/omap_mmc.o CC aarch64-softmmu/hw/sd/pxa2xx_mmci.o CC aarch64-softmmu/hw/sd/bcm2835_sdhost.o CC aarch64-softmmu/hw/ssi/omap_spi.o CC aarch64-softmmu/hw/ssi/imx_spi.o CC aarch64-softmmu/hw/timer/exynos4210_mct.o CC aarch64-softmmu/hw/timer/exynos4210_pwm.o CC aarch64-softmmu/hw/timer/exynos4210_rtc.o CC aarch64-softmmu/hw/timer/omap_gptimer.o CC aarch64-softmmu/hw/timer/omap_synctimer.o CC aarch64-softmmu/hw/timer/pxa2xx_timer.o CC aarch64-softmmu/hw/timer/digic-timer.o CC aarch64-softmmu/hw/timer/allwinner-a10-pit.o CC aarch64-softmmu/hw/usb/tusb6010.o CC aarch64-softmmu/hw/usb/chipidea.o CC aarch64-softmmu/hw/vfio/common.o CC aarch64-softmmu/hw/vfio/pci.o CC aarch64-softmmu/hw/vfio/pci-quirks.o CC aarch64-softmmu/hw/vfio/display.o CC aarch64-softmmu/hw/vfio/platform.o CC aarch64-softmmu/hw/vfio/calxeda-xgmac.o CC aarch64-softmmu/hw/vfio/amd-xgbe.o CC aarch64-softmmu/hw/vfio/spapr.o CC aarch64-softmmu/hw/virtio/virtio.o CC aarch64-softmmu/hw/virtio/virtio-balloon.o CC aarch64-softmmu/hw/virtio/virtio-crypto.o CC aarch64-softmmu/hw/virtio/virtio-crypto-pci.o CC aarch64-softmmu/hw/virtio/vhost.o CC aarch64-softmmu/hw/virtio/vhost-backend.o CC aarch64-softmmu/hw/virtio/vhost-user.o CC aarch64-softmmu/hw/virtio/vhost-vsock.o CC aarch64-softmmu/hw/arm/boot.o CC aarch64-softmmu/hw/arm/virt.o CC aarch64-softmmu/hw/arm/sysbus-fdt.o CC aarch64-softmmu/hw/arm/virt-acpi-build.o CC aarch64-softmmu/hw/arm/digic_boards.o CC aarch64-softmmu/hw/arm/exynos4_boards.o CC aarch64-softmmu/hw/arm/highbank.o CC aarch64-softmmu/hw/arm/integratorcp.o CC aarch64-softmmu/hw/arm/mainstone.o CC aarch64-softmmu/hw/arm/musicpal.o CC aarch64-softmmu/hw/arm/netduino2.o CC aarch64-softmmu/hw/arm/nseries.o CC aarch64-softmmu/hw/arm/omap_sx1.o CC aarch64-softmmu/hw/arm/palm.o CC aarch64-softmmu/hw/arm/gumstix.o CC aarch64-softmmu/hw/arm/spitz.o CC aarch64-softmmu/hw/arm/tosa.o CC aarch64-softmmu/hw/arm/z2.o CC aarch64-softmmu/hw/arm/realview.o CC aarch64-softmmu/hw/arm/stellaris.o CC aarch64-softmmu/hw/arm/collie.o CC aarch64-softmmu/hw/arm/vexpress.o CC aarch64-softmmu/hw/arm/versatilepb.o CC aarch64-softmmu/hw/arm/xilinx_zynq.o CC aarch64-softmmu/hw/arm/armv7m.o CC aarch64-softmmu/hw/arm/exynos4210.o CC aarch64-softmmu/hw/arm/pxa2xx.o CC aarch64-softmmu/hw/arm/pxa2xx_gpio.o CC aarch64-softmmu/hw/arm/pxa2xx_pic.o CC aarch64-softmmu/hw/arm/digic.o CC aarch64-softmmu/hw/arm/omap1.o CC aarch64-softmmu/hw/arm/omap2.o CC aarch64-softmmu/hw/arm/strongarm.o CC aarch64-softmmu/hw/arm/allwinner-a10.o CC aarch64-softmmu/hw/arm/cubieboard.o CC aarch64-softmmu/hw/arm/bcm2835_peripherals.o CC aarch64-softmmu/hw/arm/bcm2836.o CC aarch64-softmmu/hw/arm/raspi.o CC aarch64-softmmu/hw/arm/stm32f205_soc.o CC aarch64-softmmu/hw/arm/xlnx-zynqmp.o CC aarch64-softmmu/hw/arm/xlnx-zcu102.o CC aarch64-softmmu/hw/arm/xlnx-versal.o CC aarch64-softmmu/hw/arm/xlnx-versal-virt.o CC aarch64-softmmu/hw/arm/fsl-imx25.o CC aarch64-softmmu/hw/arm/imx25_pdk.o CC aarch64-softmmu/hw/arm/fsl-imx31.o CC aarch64-softmmu/hw/arm/kzm.o CC aarch64-softmmu/hw/arm/fsl-imx6.o CC aarch64-softmmu/hw/arm/sabrelite.o CC aarch64-softmmu/hw/arm/aspeed_soc.o CC aarch64-softmmu/hw/arm/aspeed.o CC aarch64-softmmu/hw/arm/mps2.o CC aarch64-softmmu/hw/arm/mps2-tz.o CC aarch64-softmmu/hw/arm/msf2-soc.o CC aarch64-softmmu/hw/arm/msf2-som.o CC aarch64-softmmu/hw/arm/iotkit.o CC aarch64-softmmu/hw/arm/fsl-imx7.o CC aarch64-softmmu/hw/arm/mcimx7d-sabre.o CC aarch64-softmmu/hw/arm/smmu-common.o CC aarch64-softmmu/hw/arm/smmuv3.o CC aarch64-softmmu/hw/arm/fsl-imx6ul.o CC aarch64-softmmu/hw/arm/mcimx6ul-evk.o CC aarch64-softmmu/hw/arm/nrf51_soc.o CC aarch64-softmmu/hw/arm/microbit.o CC aarch64-softmmu/target/arm/arm-semi.o CC aarch64-softmmu/target/arm/machine.o CC aarch64-softmmu/target/arm/psci.o CC aarch64-softmmu/target/arm/arch_dump.o CC aarch64-softmmu/target/arm/monitor.o CC aarch64-softmmu/target/arm/kvm-stub.o CC aarch64-softmmu/target/arm/translate.o CC aarch64-softmmu/target/arm/op_helper.o CC aarch64-softmmu/target/arm/helper.o CC aarch64-softmmu/target/arm/cpu.o CC aarch64-softmmu/target/arm/neon_helper.o CC aarch64-softmmu/target/arm/iwmmxt_helper.o CC aarch64-softmmu/target/arm/vec_helper.o CC aarch64-softmmu/target/arm/gdbstub.o CC aarch64-softmmu/target/arm/cpu64.o CC aarch64-softmmu/target/arm/translate-a64.o CC aarch64-softmmu/target/arm/helper-a64.o CC aarch64-softmmu/target/arm/gdbstub64.o CC aarch64-softmmu/target/arm/crypto_helper.o CC aarch64-softmmu/target/arm/arm-powerctl.o GEN aarch64-softmmu/target/arm/decode-sve.inc.c CC aarch64-softmmu/target/arm/sve_helper.o GEN trace/generated-helpers.c CC aarch64-softmmu/trace/control-target.o CC aarch64-softmmu/gdbstub-xml.o CC aarch64-softmmu/target/arm/translate-sve.o CC aarch64-softmmu/trace/generated-helpers.o LINK aarch64-softmmu/qemu-system-aarch64 TEST tests/qapi-schema/alternate-any.out TEST tests/qapi-schema/alternate-array.out TEST tests/qapi-schema/alternate-clash.out TEST tests/qapi-schema/alternate-conflict-dict.out TEST tests/qapi-schema/alternate-base.out TEST tests/qapi-schema/alternate-conflict-enum-bool.out TEST tests/qapi-schema/alternate-conflict-enum-int.out TEST tests/qapi-schema/alternate-conflict-string.out TEST tests/qapi-schema/alternate-conflict-bool-string.out TEST tests/qapi-schema/alternate-conflict-num-string.out TEST tests/qapi-schema/alternate-empty.out TEST tests/qapi-schema/alternate-nested.out TEST tests/qapi-schema/alternate-unknown.out TEST tests/qapi-schema/args-alternate.out TEST tests/qapi-schema/args-any.out TEST tests/qapi-schema/args-array-empty.out TEST tests/qapi-schema/args-array-unknown.out TEST tests/qapi-schema/args-bad-boxed.out TEST tests/qapi-schema/args-boxed-anon.out TEST tests/qapi-schema/args-boxed-empty.out TEST tests/qapi-schema/args-boxed-string.out TEST tests/qapi-schema/args-int.out TEST tests/qapi-schema/args-invalid.out TEST tests/qapi-schema/args-member-array-bad.out TEST tests/qapi-schema/args-member-case.out TEST tests/qapi-schema/args-member-unknown.out TEST tests/qapi-schema/args-name-clash.out TEST tests/qapi-schema/args-union.out TEST tests/qapi-schema/args-unknown.out TEST tests/qapi-schema/bad-base.out TEST tests/qapi-schema/bad-data.out TEST tests/qapi-schema/bad-ident.out TEST tests/qapi-schema/bad-if.out TEST tests/qapi-schema/bad-if-empty.out TEST tests/qapi-schema/bad-if-empty-list.out TEST tests/qapi-schema/bad-if-list.out TEST tests/qapi-schema/bad-type-bool.out TEST tests/qapi-schema/bad-type-dict.out TEST tests/qapi-schema/bad-type-int.out TEST tests/qapi-schema/base-cycle-direct.out TEST tests/qapi-schema/base-cycle-indirect.out TEST tests/qapi-schema/command-int.out TEST tests/qapi-schema/comments.out TEST tests/qapi-schema/doc-bad-alternate-member.out TEST tests/qapi-schema/doc-bad-command-arg.out TEST tests/qapi-schema/doc-bad-section.out TEST tests/qapi-schema/doc-bad-symbol.out TEST tests/qapi-schema/doc-bad-union-member.out TEST tests/qapi-schema/doc-before-include.out TEST tests/qapi-schema/doc-before-pragma.out TEST tests/qapi-schema/doc-duplicated-arg.out TEST tests/qapi-schema/doc-duplicated-return.out TEST tests/qapi-schema/doc-duplicated-since.out TEST tests/qapi-schema/doc-empty-section.out TEST tests/qapi-schema/doc-empty-arg.out TEST tests/qapi-schema/doc-empty-symbol.out TEST tests/qapi-schema/doc-good.out TEST tests/qapi-schema/doc-interleaved-section.out TEST tests/qapi-schema/doc-invalid-end.out TEST tests/qapi-schema/doc-invalid-end2.out TEST tests/qapi-schema/doc-invalid-return.out TEST tests/qapi-schema/doc-invalid-section.out TEST tests/qapi-schema/doc-invalid-start.out TEST tests/qapi-schema/doc-missing-colon.out TEST tests/qapi-schema/doc-missing-expr.out TEST tests/qapi-schema/doc-missing-space.out TEST tests/qapi-schema/doc-missing.out TEST tests/qapi-schema/doc-no-symbol.out TEST tests/qapi-schema/double-data.out TEST tests/qapi-schema/double-type.out TEST tests/qapi-schema/duplicate-key.out TEST tests/qapi-schema/empty.out TEST tests/qapi-schema/enum-bad-name.out TEST tests/qapi-schema/enum-bad-prefix.out TEST tests/qapi-schema/enum-clash-member.out TEST tests/qapi-schema/enum-dict-member.out TEST tests/qapi-schema/enum-int-member.out TEST tests/qapi-schema/enum-member-case.out TEST tests/qapi-schema/enum-missing-data.out TEST tests/qapi-schema/enum-wrong-data.out TEST tests/qapi-schema/escape-outside-string.out TEST tests/qapi-schema/escape-too-big.out TEST tests/qapi-schema/escape-too-short.out TEST tests/qapi-schema/event-boxed-empty.out TEST tests/qapi-schema/event-case.out TEST tests/qapi-schema/event-nest-struct.out TEST tests/qapi-schema/flat-union-array-branch.out TEST tests/qapi-schema/flat-union-bad-base.out TEST tests/qapi-schema/flat-union-bad-discriminator.out TEST tests/qapi-schema/flat-union-base-any.out TEST tests/qapi-schema/flat-union-base-union.out TEST tests/qapi-schema/flat-union-empty.out TEST tests/qapi-schema/flat-union-clash-member.out TEST tests/qapi-schema/flat-union-inline.out TEST tests/qapi-schema/flat-union-int-branch.out TEST tests/qapi-schema/flat-union-invalid-branch-key.out TEST tests/qapi-schema/flat-union-invalid-discriminator.out TEST tests/qapi-schema/flat-union-no-base.out TEST tests/qapi-schema/flat-union-optional-discriminator.out TEST tests/qapi-schema/flat-union-string-discriminator.out TEST tests/qapi-schema/funny-char.out TEST tests/qapi-schema/ident-with-escape.out TEST tests/qapi-schema/include-before-err.out TEST tests/qapi-schema/include-cycle.out TEST tests/qapi-schema/include-extra-junk.out TEST tests/qapi-schema/include-format-err.out TEST tests/qapi-schema/include-nested-err.out TEST tests/qapi-schema/include-no-file.out TEST tests/qapi-schema/include-non-file.out TEST tests/qapi-schema/include-relpath.out TEST tests/qapi-schema/include-repetition.out TEST tests/qapi-schema/include-self-cycle.out TEST tests/qapi-schema/include-simple.out TEST tests/qapi-schema/indented-expr.out TEST tests/qapi-schema/leading-comma-list.out TEST tests/qapi-schema/leading-comma-object.out TEST tests/qapi-schema/missing-colon.out TEST tests/qapi-schema/missing-comma-list.out TEST tests/qapi-schema/missing-comma-object.out TEST tests/qapi-schema/missing-type.out TEST tests/qapi-schema/nested-struct-data.out TEST tests/qapi-schema/non-objects.out TEST tests/qapi-schema/oob-test.out TEST tests/qapi-schema/allow-preconfig-test.out TEST tests/qapi-schema/pragma-doc-required-crap.out TEST tests/qapi-schema/pragma-extra-junk.out TEST tests/qapi-schema/pragma-name-case-whitelist-crap.out TEST tests/qapi-schema/pragma-non-dict.out TEST tests/qapi-schema/pragma-returns-whitelist-crap.out TEST tests/qapi-schema/qapi-schema-test.out TEST tests/qapi-schema/quoted-structural-chars.out TEST tests/qapi-schema/redefined-builtin.out TEST tests/qapi-schema/redefined-command.out TEST tests/qapi-schema/redefined-event.out TEST tests/qapi-schema/redefined-type.out TEST tests/qapi-schema/reserved-command-q.out TEST tests/qapi-schema/reserved-enum-q.out TEST tests/qapi-schema/reserved-member-has.out TEST tests/qapi-schema/reserved-member-q.out TEST tests/qapi-schema/reserved-member-u.out TEST tests/qapi-schema/reserved-member-underscore.out TEST tests/qapi-schema/reserved-type-kind.out TEST tests/qapi-schema/reserved-type-list.out TEST tests/qapi-schema/returns-alternate.out TEST tests/qapi-schema/returns-array-bad.out TEST tests/qapi-schema/returns-dict.out TEST tests/qapi-schema/returns-unknown.out TEST tests/qapi-schema/returns-whitelist.out TEST tests/qapi-schema/struct-base-clash-deep.out TEST tests/qapi-schema/struct-base-clash.out TEST tests/qapi-schema/struct-data-invalid.out TEST tests/qapi-schema/struct-member-invalid.out TEST tests/qapi-schema/trailing-comma-list.out TEST tests/qapi-schema/trailing-comma-object.out TEST tests/qapi-schema/type-bypass-bad-gen.out TEST tests/qapi-schema/unclosed-list.out TEST tests/qapi-schema/unclosed-object.out TEST tests/qapi-schema/unclosed-string.out TEST tests/qapi-schema/unicode-str.out TEST tests/qapi-schema/union-base-empty.out TEST tests/qapi-schema/union-base-no-discriminator.out TEST tests/qapi-schema/union-branch-case.out TEST tests/qapi-schema/union-empty.out TEST tests/qapi-schema/union-clash-branches.out TEST tests/qapi-schema/union-invalid-base.out TEST tests/qapi-schema/union-optional-branch.out TEST tests/qapi-schema/union-unknown.out TEST tests/qapi-schema/unknown-escape.out TEST tests/qapi-schema/unknown-expr-key.out GEN tests/qapi-schema/doc-good.test.texi CC tests/check-qdict.o CC tests/check-block-qdict.o CC tests/test-char.o CC tests/check-qnum.o CC tests/check-qstring.o CC tests/check-qlist.o CC tests/check-qnull.o CC tests/check-qobject.o CC tests/check-qjson.o CC tests/check-qlit.o CC tests/test-qobject-output-visitor.o CC tests/test-qapi-visit.o CC tests/test-qapi-types.o CC tests/test-qapi-events.o CC tests/test-qapi-introspect.o CC tests/test-clone-visitor.o CC tests/test-qobject-input-visitor.o CC tests/test-qapi-commands.o CC tests/test-qmp-cmds.o CC tests/test-string-input-visitor.o CC tests/test-string-output-visitor.o CC tests/test-qmp-event.o CC tests/test-opts-visitor.o CC tests/test-coroutine.o CC tests/iothread.o CC tests/test-visitor-serialization.o CC tests/test-iov.o CC tests/test-aio.o CC tests/test-aio-multithread.o CC tests/test-throttle.o CC tests/test-thread-pool.o CC tests/test-hbitmap.o CC tests/test-bdrv-drain.o CC tests/test-blockjob.o CC tests/test-blockjob-txn.o CC tests/test-block-backend.o CC tests/test-x86-cpuid.o CC tests/test-xbzrle.o CC tests/test-vmstate.o CC tests/test-cutils.o CC tests/test-shift128.o CC tests/test-mul64.o CC tests/test-int128.o CC tests/rcutorture.o CC tests/test-rcu-list.o CC tests/test-rcu-simpleq.o CC tests/test-rcu-tailq.o CC tests/test-qdist.o CC tests/test-qht.o CC tests/test-qht-par.o CC tests/qht-bench.o CC tests/test-bitops.o CC tests/test-bitcnt.o CC tests/test-qdev-global-props.o CC tests/check-qom-interface.o CC tests/test-qemu-opts.o CC tests/check-qom-proplist.o CC tests/test-keyval.o CC tests/test-write-threshold.o CC tests/test-crypto-hash.o CC tests/test-crypto-hmac.o CC tests/test-crypto-cipher.o CC tests/test-crypto-secret.o CC tests/test-qga.o CC tests/libqtest.o CC tests/test-timed-average.o CC tests/test-util-sockets.o CC tests/socket-helpers.o CC tests/test-io-task.o CC tests/test-io-channel-socket.o CC tests/io-channel-helpers.o CC tests/test-io-channel-file.o CC tests/test-io-channel-command.o CC tests/test-io-channel-buffer.o CC tests/test-base64.o CC tests/test-crypto-pbkdf.o CC tests/test-crypto-ivgen.o CC tests/test-crypto-afsplit.o CC tests/test-crypto-xts.o CC tests/test-crypto-block.o CC tests/test-logging.o CC tests/test-replication.o CC tests/test-bufferiszero.o CC tests/test-uuid.o CC tests/ptimer-test.o CC tests/ptimer-test-stubs.o CC tests/test-qapi-util.o CC tests/vhost-user-test.o CC tests/libqos/pci.o CC tests/libqos/fw_cfg.o CC tests/libqos/malloc.o CC tests/libqos/i2c.o CC tests/libqos/libqos.o CC tests/libqos/malloc-spapr.o CC tests/libqos/libqos-spapr.o CC tests/libqos/rtas.o CC tests/libqos/pci-spapr.o CC tests/libqos/pci-pc.o CC tests/libqos/malloc-pc.o CC tests/libqos/libqos-pc.o CC tests/libqos/ahci.o CC tests/libqos/virtio.o CC tests/libqos/virtio-pci.o CC tests/libqos/virtio-mmio.o CC tests/libqos/malloc-generic.o CC tests/endianness-test.o CC tests/fdc-test.o CC tests/ide-test.o CC tests/ahci-test.o CC tests/hd-geo-test.o CC tests/boot-order-test.o CC tests/bios-tables-test.o CC tests/boot-sector.o CC tests/acpi-utils.o CC tests/boot-serial-test.o CC tests/pxe-test.o CC tests/rtc-test.o CC tests/ipmi-kcs-test.o CC tests/ipmi-bt-test.o CC tests/i440fx-test.o CC tests/fw_cfg-test.o CC tests/drive_del-test.o CC tests/wdt_ib700-test.o CC tests/tco-test.o CC tests/e1000-test.o CC tests/e1000e-test.o CC tests/rtl8139-test.o CC tests/pcnet-test.o CC tests/eepro100-test.o CC tests/ne2000-test.o CC tests/nvme-test.o CC tests/es1370-test.o CC tests/ac97-test.o CC tests/virtio-net-test.o CC tests/virtio-balloon-test.o CC tests/virtio-blk-test.o CC tests/virtio-rng-test.o CC tests/virtio-scsi-test.o CC tests/virtio-console-test.o CC tests/virtio-serial-test.o CC tests/tpci200-test.o CC tests/ipoctal232-test.o CC tests/intel-hda-test.o CC tests/display-vga-test.o CC tests/ivshmem-test.o CC tests/megasas-test.o CC tests/vmxnet3-test.o CC tests/pvpanic-test.o CC tests/i82801b11-test.o CC tests/ioh3420-test.o CC tests/usb-hcd-ohci-test.o CC tests/libqos/usb.o CC tests/usb-hcd-uhci-test.o CC tests/usb-hcd-xhci-test.o CC tests/cpu-plug-test.o CC tests/q35-test.o CC tests/vmgenid-test.o CC tests/tpm-crb-swtpm-test.o CC tests/tpm-emu.o CC tests/tpm-util.o CC tests/tpm-tests.o CC tests/tpm-crb-test.o CC tests/tpm-tis-swtpm-test.o CC tests/tpm-tis-test.o CC tests/test-netfilter.o CC tests/test-filter-mirror.o CC tests/test-filter-redirector.o CC tests/migration-test.o CC tests/test-x86-cpuid-compat.o CC tests/numa-test.o CC tests/sdhci-test.o CC tests/qmp-test.o CC tests/qmp-cmd-test.o CC tests/device-introspect-test.o CC tests/cdrom-test.o CC tests/machine-none-test.o CC tests/qom-test.o CC tests/test-hmp.o TEST decodetree.py LINK tests/check-qdict LINK tests/check-block-qdict LINK tests/test-char LINK tests/check-qnum LINK tests/check-qstring LINK tests/check-qlist LINK tests/check-qnull LINK tests/check-qobject LINK tests/check-qjson LINK tests/check-qlit LINK tests/test-qobject-output-visitor LINK tests/test-clone-visitor LINK tests/test-qobject-input-visitor LINK tests/test-qmp-cmds LINK tests/test-string-input-visitor LINK tests/test-string-output-visitor LINK tests/test-qmp-event LINK tests/test-opts-visitor LINK tests/test-coroutine LINK tests/test-visitor-serialization LINK tests/test-iov LINK tests/test-aio LINK tests/test-aio-multithread LINK tests/test-throttle LINK tests/test-thread-pool LINK tests/test-hbitmap LINK tests/test-bdrv-drain LINK tests/test-blockjob LINK tests/test-blockjob-txn LINK tests/test-block-backend LINK tests/test-x86-cpuid LINK tests/test-xbzrle LINK tests/test-vmstate LINK tests/test-cutils LINK tests/test-shift128 LINK tests/test-mul64 LINK tests/test-int128 LINK tests/rcutorture LINK tests/test-rcu-list LINK tests/test-rcu-simpleq LINK tests/test-rcu-tailq LINK tests/test-qdist LINK tests/test-qht LINK tests/qht-bench LINK tests/test-bitops LINK tests/test-bitcnt LINK tests/test-qdev-global-props LINK tests/check-qom-interface LINK tests/check-qom-proplist LINK tests/test-qemu-opts LINK tests/test-keyval LINK tests/test-write-threshold LINK tests/test-crypto-hash LINK tests/test-crypto-hmac LINK tests/test-crypto-cipher LINK tests/test-crypto-secret LINK tests/test-qga LINK tests/test-timed-average LINK tests/test-util-sockets LINK tests/test-io-task LINK tests/test-io-channel-socket LINK tests/test-io-channel-file LINK tests/test-io-channel-command LINK tests/test-io-channel-buffer LINK tests/test-base64 LINK tests/test-crypto-pbkdf LINK tests/test-crypto-ivgen LINK tests/test-crypto-afsplit LINK tests/test-crypto-xts LINK tests/test-crypto-block LINK tests/test-logging LINK tests/test-replication LINK tests/test-bufferiszero LINK tests/test-uuid LINK tests/ptimer-test LINK tests/test-qapi-util LINK tests/vhost-user-test LINK tests/endianness-test LINK tests/fdc-test LINK tests/ide-test LINK tests/ahci-test LINK tests/hd-geo-test LINK tests/boot-order-test LINK tests/bios-tables-test LINK tests/boot-serial-test LINK tests/pxe-test LINK tests/rtc-test LINK tests/ipmi-kcs-test LINK tests/ipmi-bt-test LINK tests/i440fx-test LINK tests/fw_cfg-test LINK tests/drive_del-test LINK tests/wdt_ib700-test LINK tests/tco-test LINK tests/e1000-test LINK tests/e1000e-test LINK tests/rtl8139-test LINK tests/pcnet-test LINK tests/eepro100-test LINK tests/ne2000-test LINK tests/nvme-test LINK tests/ac97-test LINK tests/es1370-test LINK tests/virtio-net-test LINK tests/virtio-balloon-test LINK tests/virtio-blk-test LINK tests/virtio-rng-test LINK tests/virtio-scsi-test LINK tests/virtio-serial-test LINK tests/virtio-console-test LINK tests/tpci200-test LINK tests/ipoctal232-test LINK tests/display-vga-test LINK tests/intel-hda-test LINK tests/ivshmem-test LINK tests/megasas-test LINK tests/vmxnet3-test LINK tests/pvpanic-test LINK tests/i82801b11-test LINK tests/ioh3420-test LINK tests/usb-hcd-ohci-test LINK tests/usb-hcd-uhci-test LINK tests/usb-hcd-xhci-test LINK tests/cpu-plug-test LINK tests/q35-test LINK tests/vmgenid-test LINK tests/tpm-crb-swtpm-test LINK tests/tpm-crb-test LINK tests/tpm-tis-swtpm-test LINK tests/tpm-tis-test LINK tests/test-netfilter LINK tests/test-filter-mirror LINK tests/test-filter-redirector LINK tests/migration-test LINK tests/test-x86-cpuid-compat LINK tests/numa-test LINK tests/sdhci-test LINK tests/qmp-test LINK tests/qmp-cmd-test LINK tests/device-introspect-test LINK tests/cdrom-test LINK tests/machine-none-test LINK tests/qom-test LINK tests/test-hmp
GTESTER tests/check-qdict
GTESTER tests/test-char
GTESTER tests/check-qstring
GTESTER tests/check-block-qdict
GTESTER tests/check-qnum
GTESTER tests/check-qlist
GTESTER tests/check-qnull
GTESTER tests/check-qobject
GTESTER tests/test-qobject-output-visitor
GTESTER tests/test-clone-visitor
GTESTER tests/check-qjson
GTESTER tests/check-qlit
GTESTER tests/test-qobject-input-visitor
GTESTER tests/test-qmp-cmds
GTESTER tests/test-string-input-visitor
GTESTER tests/test-qmp-event
GTESTER tests/test-string-output-visitor
GTESTER tests/test-opts-visitor
GTESTER tests/test-coroutine
GTESTER tests/test-visitor-serialization
GTESTER tests/test-iov
GTESTER tests/test-aio
GTESTER tests/test-aio-multithread
GTESTER tests/test-throttle
GTESTER tests/test-thread-pool
GTESTER tests/test-hbitmap
GTESTER tests/test-bdrv-drain
GTESTER tests/test-blockjob
GTESTER tests/test-blockjob-txn
GTESTER tests/test-block-backend
GTESTER tests/test-x86-cpuid
GTESTER tests/test-xbzrle
GTESTER tests/test-vmstate
GTESTER tests/test-cutils
GTESTER tests/test-shift128
GTESTER tests/test-mul64
GTESTER tests/test-int128
GTESTER tests/rcutorture
GTESTER tests/test-rcu-list
GTESTER tests/test-rcu-simpleq
GTESTER tests/test-rcu-tailq
GTESTER tests/test-qdist
GTESTER tests/test-qht
LINK tests/test-qht-par
GTESTER tests/test-bitops
GTESTER tests/test-bitcnt
GTESTER tests/test-qdev-global-props
GTESTER tests/check-qom-interface
GTESTER tests/check-qom-proplist
GTESTER tests/test-qemu-opts
GTESTER tests/test-keyval
GTESTER tests/test-write-threshold
GTESTER tests/test-crypto-hash
GTESTER tests/test-crypto-hmac
GTESTER tests/test-crypto-cipher
GTESTER tests/test-crypto-secret
GTESTER tests/test-qga
GTESTER tests/test-timed-average
GTESTER tests/test-util-sockets
GTESTER tests/test-io-task
GTESTER tests/test-io-channel-socket
GTESTER tests/test-io-channel-file
GTESTER tests/test-io-channel-command
GTESTER tests/test-io-channel-buffer
GTESTER tests/test-base64
GTESTER tests/test-crypto-pbkdf
GTESTER tests/test-crypto-ivgen
GTESTER tests/test-crypto-afsplit
GTESTER tests/test-crypto-xts
GTESTER tests/test-crypto-block
GTESTER tests/test-logging
GTESTER tests/test-replication
GTESTER tests/test-bufferiszero
GTESTER tests/test-uuid
GTESTER tests/ptimer-test
GTESTER tests/test-qapi-util
GTESTER check-qtest-x86_64
GTESTER check-qtest-aarch64
GTESTER tests/test-qht-par
Broken pipe/tmp/qemu-test/src/tests/libqtest.c:125: kill_qemu() detected QEMU death from signal 11 (Segmentation fault) (core dumped)
GTester: last random seed: R02Sa319f44c059771b5ebd17f8a7060a8c8
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
swtpm not in PATH or missing --tpm2 support; swtpm not in PATH or missing --tpm2 support; swtpm not in PATH or missing --tpm2 support; swtpm not in PATH or missing --tpm2 support; Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
make: *** [check-qtest-aarch64] Error 1
make: *** Waiting for unfinished jobs....
Traceback (most recent call last):
File "./tests/docker/docker.py", line 563, in <module>
sys.exit(main())
File "./tests/docker/docker.py", line 560, in main
return args.cmdobj.run(args, argv)
File "./tests/docker/docker.py", line 306, in run
return Docker().run(argv, args.keep, quiet=args.quiet)
File "./tests/docker/docker.py", line 274, in run
quiet=quiet)
File "./tests/docker/docker.py", line 181, in _do_check
return subprocess.check_call(self._command + cmd, **kwargs)
File "/usr/lib64/python2.7/subprocess.py", line 186, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', '--label', 'com.qemu.instance.uuid=94b4f02ce1a011e8a04752540069c830', '-u', '1000', '--security-opt', 'seccomp=unconfined', '--rm', '--net=none', '-e', 'TARGET_LIST=', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=8', '-e', 'DEBUG=', '-e', 'SHOW_ENV=1', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/home/patchew/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-_16qprbf/src/docker-src.2018-11-06-03.47.10.29427:/var/tmp/qemu:z,ro', 'qemu:centos7', '/var/tmp/qemu/run', 'test-quick']' returned non-zero exit status 2 make[1]: *** [tests/docker/Makefile.include:217: docker-run] Error 1
make[1]: Leaving directory '/var/tmp/patchew-tester-tmp-_16qprbf/src'
make: *** [tests/docker/Makefile.include:251: docker-run-test-quick@centos7] Error 2
real 8m26.315s
user 0m5.541s
sys 0m4.302s
=== OUTPUT END ===
Test command exited with code: 2
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to [email protected]