Skip to contentSkip to conversation

More fully implement ARM PMUv3

PATCH Superseded Aaron Lindsay 4 participants 27 messages Nov 5, 2018 – Nov 20, 2018

v7 of 12 Superseded Latest is v12 →

lore
Share & tools
lore
#0 lore raw

v7 cover More fully implement ARM PMUv3

The ARM PMU implementation currently contains a basic cycle counter, but it is often useful to gather counts of other events, filter them based on execution mode, and/or be notified on counter overflow. These patches flesh out the implementations of various PMU registers including PM[X]EVCNTR and PM[X]EVTYPER, add a struct definition to represent arbitrary counter types, implement mode filtering, send interrupts on counter overflow, and add instruction, cycle, and software increment events.

Since v6 [1] I have made the following changes:
* Use cpu_get_host_ticks() for the cycle counter value for user mode
* Re-staged "PMU: Set PMCR.N to 4" so that the value of the pmcrn local variable matches the architectural value of PMCR.N
* Re-ordered "Reorganize PMCCNTR accesses" to come first to eliminate the churn of *_op_start/finish function names and definitions
* Use extract64 and ARRAY_SIZE macros where applicable
* Add a return value to the post_save migration function

[1] - https://lists.gnu.org/archive/html/qemu-devel/2018-10/msg02036.html

Aaron Lindsay (12):
migration: Add post_save function to VMStateDescription target/arm: Reorganize PMCCNTR accesses
target/arm: Swap PMU values before/after migrations target/arm: Filter cycle counter based on PMCCFILTR_EL0 target/arm: Allow AArch32 access for PMCCFILTR target/arm: Implement PMOVSSET
target/arm: Add array for supported PMU events, generate PMCEID[01] target/arm: Finish implementation of PM[X]EVCNTR and PM[X]EVTYPER target/arm: PMU: Add instruction and cycle events target/arm: PMU: Set PMCR.N to 4
target/arm: Implement PMSWINC
target/arm: Send interrupts on PMU counter overflow

 docs/devel/migration.rst    |   9 +-
 include/migration/vmstate.h |   1 +
 migration/vmstate.c         |  13 +-
 target/arm/cpu.c            |  28 +-
 target/arm/cpu.h            |  68 +++-
 target/arm/cpu64.c          |   4 -
 target/arm/helper.c         | 774 ++++++++++++++++++++++++++++++++----
 target/arm/machine.c        |  20 +
 8 files changed, 816 insertions(+), 101 deletions(-)
Signature · 1 line
2.19.1
#1 lore raw

PATCH v7 1/12 migration: Add post_save function to VMStateDescription

In some cases it may be helpful to modify state before saving it for migration, and then modify the state back after it has been saved. The existing pre_save function provides half of this functionality. This patch adds a post_save function to provide the second half.

Cc Dr. David Alan Gilbert <[email protected]>
---
 docs/devel/migration.rst    |  9 +++++++--
 include/migration/vmstate.h |  1 +
 migration/vmstate.c         | 13 ++++++++++++-
 3 files changed, 20 insertions(+), 3 deletions(-)
docs/devel/migration.rst +7 -2
index 687570754d..92fb521ad2 100644
@@ -419,8 +419,13 @@ The functions to do that are inside a vmstate definition, and are called:
 
   This function is called before we save the state of one device.
 
-Example: You can look at hpet.c, that uses the three function to
-massage the state that is transferred.
+- ``int (*post_save)(void *opaque);``
+
+  This function is called after we save the state of one device
+  (even upon failure, unless the call to pre_save returned an error).
+
+Example: You can look at hpet.c, that uses the first three functions
+to massage the state that is transferred.
 
 The ``VMSTATE_WITH_TMP`` macro may be useful when the migration
 data doesn't match the stored device data well; it allows an
include/migration/vmstate.h +1 -0
index 2b501d0466..9355d83056 100644
@@ -185,6 +185,7 @@ struct VMStateDescription {
     int (*pre_load)(void *opaque);
     int (*post_load)(void *opaque, int version_id);
     int (*pre_save)(void *opaque);
+    int (*post_save)(void *opaque);
     bool (*needed)(void *opaque);
     VMStateField *fields;
     const VMStateDescription **subsections;
migration/vmstate.c +12 -1
index 0bc240a317..c15d75260a 100644
@@ -387,6 +387,9 @@ int vmstate_save_state_v(QEMUFile *f, const VMStateDescription *vmsd,
                 if (ret) {
                     error_report("Save of field %s/%s failed",
                                  vmsd->name, field->name);
+                    if (vmsd->post_save) {
+                        vmsd->post_save(opaque);
+                    }
                     return ret;
                 }
 
@@ -412,7 +415,15 @@ int vmstate_save_state_v(QEMUFile *f, const VMStateDescription *vmsd,
         json_end_array(vmdesc);
     }
 
-    return vmstate_subsection_save(f, vmsd, opaque, vmdesc);
+    ret = vmstate_subsection_save(f, vmsd, opaque, vmdesc);
+
+    if (vmsd->post_save) {
+        int ps_ret = vmsd->post_save(opaque);
+        if (!ret) {
+            ret = ps_ret;
+        }
+    }
+    return ret;
 }
 
 static const VMStateDescription *
Signature · 1 line
2.19.1
Reviewed-by on v7 1/12
#2 lore raw

Re: [Qemu-arm] [PATCH v7 01/12] migration: Add post_save function to VMStateDescription

Quoted 8 lines · Aaron Lindsay

In some cases it may be helpful to modify state before saving it for migration, and then modify the state back after it has been saved. The existing pre_save function provides half of this functionality. This patch adds a post_save function to provide the second half.

Cc Dr. David Alan Gilbert <[email protected]>

---

David: do you want to provide a reviewed-by/acked-by for the migration vmstate API change ?

thanks
-- PMM

#3 lore raw

Re: [Qemu-arm] [PATCH v7 01/12] migration: Add post_save function to VMStateDescription

Quoted 6 lines · * Peter Maydell ([email protected]) wrote:
Quoted 5 lines · Aaron Lindsay

In some cases it may be helpful to modify state before saving it for migration, and then modify the state back after it has been saved. The existing pre_save function provides half of this functionality. This patch adds a post_save function to provide the second half.

Quoted 8 lines
Quoted 3 lines
Cc Dr. David Alan Gilbert <[email protected]>

---

David: do you want to provide a reviewed-by/acked-by for the migration vmstate API change ?

Yep, it's much more symmetric now:

Quoted 2 lines

thanks
-- PMM

--
Dr. David Alan Gilbert / [email protected] / Manchester, UK

#4 lore raw

PATCH v7 2/12 target/arm: Reorganize PMCCNTR accesses

In reply to Aaron Lindsay

pmccntr_read and pmccntr_write contained duplicate code that was already being handled by pmccntr_sync. Consolidate the duplicated code into two
functions: pmccntr_op_start and pmccntr_op_finish. Add a companion to c15_ccnt in CPUARMState so that we can simultaneously save both the architectural register value and the last underlying cycle count - this ensures time isn't lost and will also allow us to access the 'old' architectural register value in order to detect overflows in later patches.

---
 target/arm/cpu.h    |  38 +++++++++++----
 target/arm/helper.c | 114 +++++++++++++++++++++++++++-----------------
 2 files changed, 99 insertions(+), 53 deletions(-)
target/arm/cpu.h +30 -8
index b5eff79f73..50a0862c84 100644
@@ -468,10 +468,20 @@ typedef struct CPUARMState {
         uint64_t oslsr_el1; /* OS Lock Status */
         uint64_t mdcr_el2;
         uint64_t mdcr_el3;
-        /* If the counter is enabled, this stores the last time the counter
-         * was reset. Otherwise it stores the counter value
+        /* Stores the architectural value of the counter *the last time it was
+         * updated* by pmccntr_op_start. Accesses should always be surrounded
+         * by pmccntr_op_start/pmccntr_op_finish to guarantee the latest
+         * architecturally-correct value is being read/set.
          */
         uint64_t c15_ccnt;
+        /* Stores the delta between the architectural value and the underlying
+         * cycle count during normal operation. It is used to update c15_ccnt
+         * to be the correct architectural value before accesses. During
+         * accesses, c15_ccnt_delta contains the underlying count being used
+         * for the access, after which it reverts to the delta value in
+         * pmccntr_op_finish.
+         */
+        uint64_t c15_ccnt_delta;
         uint64_t pmccfiltr_el0; /* Performance Monitor Filter Register */
         uint64_t vpidr_el2; /* Virtualization Processor ID Register */
         uint64_t vmpidr_el2; /* Virtualization Multiprocessor ID Register */
@@ -953,15 +963,27 @@ int cpu_arm_signal_handler(int host_signum, void *pinfo,
                            void *puc);
 
 /**
- * pmccntr_sync
+ * pmccntr_op_start/finish
+ * @env: CPUARMState
+ *
+ * Convert the counter in the PMCCNTR between its delta form (the typical mode
+ * when it's enabled) and the guest-visible value. These two calls must always
+ * surround any action which might affect the counter.
+ */
+void pmccntr_op_start(CPUARMState *env);
+void pmccntr_op_finish(CPUARMState *env);
+
+/**
+ * pmu_op_start/finish
  * @env: CPUARMState
  *
- * Synchronises the counter in the PMCCNTR. This must always be called twice,
- * once before any action that might affect the timer and again afterwards.
- * The function is used to swap the state of the register if required.
- * This only happens when not in user mode (!CONFIG_USER_ONLY)
+ * Convert all PMU counters between their delta form (the typical mode when
+ * they are enabled) and the guest-visible values. These two calls must
+ * surround any action which might affect the counters, and the return value
+ * from pmu_op_start must be supplied as the second argument to pmu_op_finish.
  */
-void pmccntr_sync(CPUARMState *env);
+void pmu_op_start(CPUARMState *env);
+void pmu_op_finish(CPUARMState *env);
 
 /* SCTLR bit meanings. Several bits have been reused in newer
  * versions of the architecture; in that case we define constants
target/arm/helper.c +69 -45

161 lines not on this page · raw message

Signature · 1 line
2.19.1
Reviewed-by on v7 2/12
#5 lore raw

Re: [Qemu-arm] [PATCH v7 02/12] target/arm: Reorganize PMCCNTR accesses

Quoted 31 lines · Aaron Lindsay

pmccntr_read and pmccntr_write contained duplicate code that was already being handled by pmccntr_sync. Consolidate the duplicated code into two
functions: pmccntr_op_start and pmccntr_op_finish. Add a companion to c15_ccnt in CPUARMState so that we can simultaneously save both the architectural register value and the last underlying cycle count - this ensures time isn't lost and will also allow us to access the 'old' architectural register value in order to detect overflows in later patches.

/**
- * pmccntr_sync
+ * pmccntr_op_start/finish
+ * @env: CPUARMState
+ *
+ * Convert the counter in the PMCCNTR between its delta form (the typical mode
+ * when it's enabled) and the guest-visible value. These two calls must always
+ * surround any action which might affect the counter.
+ */

target/arm/cpu.h +5 -2
+void pmccntr_op_start(CPUARMState *env);
+void pmccntr_op_finish(CPUARMState *env);
+
+/**
+ * pmu_op_start/finish
  * @env: CPUARMState
  *
- * Synchronises the counter in the PMCCNTR. This must always be called twice,
- * once before any action that might affect the timer and again afterwards.

target/arm/cpu.h int cpu_arm_signal_handler(int host_signum, void *pinfo, · line 986

Quoted 10 lines
target/arm/cpu.h +6 -3
- * The function is used to swap the state of the register if required.
- * This only happens when not in user mode (!CONFIG_USER_ONLY)
+ * Convert all PMU counters between their delta form (the typical mode when
+ * they are enabled) and the guest-visible values. These two calls must
+ * surround any action which might affect the counters, and the return value
+ * from pmu_op_start must be supplied as the second argument to pmu_op_finish.
  */
-void pmccntr_sync(CPUARMState *env);
+void pmu_op_start(CPUARMState *env);
+void pmu_op_finish(CPUARMState *env);

The comment says that pmu_op_start returns a value and pmu_op_finish has a second argument, but the prototypes disagree...

Otherwise

so if this turns out to be the only problem I can fix it up when I apply it to my tree, if you provide suitable new comment text.

thanks
-- PMM

#6 lore raw

Re: [Qemu-arm] [PATCH v7 02/12] target/arm: Reorganize PMCCNTR accesses

Quoted 37 lines · Peter Maydell
Quoted 36 lines · Aaron Lindsay

pmccntr_read and pmccntr_write contained duplicate code that was already being handled by pmccntr_sync. Consolidate the duplicated code into two
functions: pmccntr_op_start and pmccntr_op_finish. Add a companion to c15_ccnt in CPUARMState so that we can simultaneously save both the architectural register value and the last underlying cycle count - this ensures time isn't lost and will also allow us to access the 'old' architectural register value in order to detect overflows in later patches.

/**
- * pmccntr_sync
+ * pmccntr_op_start/finish
+ * @env: CPUARMState
+ *
+ * Convert the counter in the PMCCNTR between its delta form (the typical mode
+ * when it's enabled) and the guest-visible value. These two calls must always
+ * surround any action which might affect the counter.
+ */

target/arm/cpu.h +8 -4
+void pmccntr_op_start(CPUARMState *env);
+void pmccntr_op_finish(CPUARMState *env);
+
+/**
+ * pmu_op_start/finish
  * @env: CPUARMState
  *
- * Synchronises the counter in the PMCCNTR. This must always be called twice,
- * once before any action that might affect the timer and again afterwards.
- * The function is used to swap the state of the register if required.
- * This only happens when not in user mode (!CONFIG_USER_ONLY)
+ * Convert all PMU counters between their delta form (the typical mode when
+ * they are enabled) and the guest-visible values. These two calls must
+ * surround any action which might affect the counters, and the return value
Quoted 8 lines

target/arm/cpu.h int cpu_arm_signal_handler(int host_signum, void *pinfo, · line 986

Quoted 5 lines

+ * from pmu_op_start must be supplied as the second argument to pmu_op_finish. */

target/arm/cpu.h +2 -1
-void pmccntr_sync(CPUARMState *env);
+void pmu_op_start(CPUARMState *env);
+void pmu_op_finish(CPUARMState *env);

The comment says that pmu_op_start returns a value and pmu_op_finish has a second argument, but the prototypes disagree...

Doh, I updated the comment for pmccntr_op_* but missed pmu_op_*. The last sentence should end after the comma:

Quoted 9 lines
Quoted 4 lines

+ * Convert all PMU counters between their delta form (the typical mode when
+ * they are enabled) and the guest-visible values. These two calls must
+ * surround any action which might affect the counters.
*/

Otherwise

so if this turns out to be the only problem I can fix it up when I apply it to my tree, if you provide suitable new comment text.

I've also updated the comment text in my tree, so if/when there is a v8 of this patchset, it won't be lost.

-Aaron

#7 lore raw

PATCH v7 3/12 target/arm: Swap PMU values before/after migrations

In reply to Aaron Lindsay

Because of the PMU's design, many register accesses have side effects which are inter-related, meaning that the normal method of saving CP registers can result in inconsistent state. These side-effects are largely handled in pmu_op_start/finish functions which can be called before and after the state is saved/restored. By doing this and adding raw read/write functions for the affected registers, we avoid migration-related inconsistencies.

---
 target/arm/helper.c  |  6 ++++--
 target/arm/machine.c | 20 ++++++++++++++++++++
 2 files changed, 24 insertions(+), 2 deletions(-)
target/arm/helper.c +4 -2
index 281bcff1da..5deff3d11f 100644
@@ -1450,11 +1450,13 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 0,
       .access = PL0_RW, .accessfn = pmreg_access_ccntr,
       .type = ARM_CP_IO,
-      .readfn = pmccntr_read, .writefn = pmccntr_write, },
+      .fieldoffset = offsetof(CPUARMState, cp15.c15_ccnt),
+      .readfn = pmccntr_read, .writefn = pmccntr_write,
+      .raw_readfn = raw_read, .raw_writefn = raw_write, },
 #endif
     { .name = "PMCCFILTR_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 15, .opc2 = 7,
-      .writefn = pmccfiltr_write,
+      .writefn = pmccfiltr_write, .raw_writefn = raw_write,
       .access = PL0_RW, .accessfn = pmreg_access,
       .type = ARM_CP_IO,
       .fieldoffset = offsetof(CPUARMState, cp15.pmccfiltr_el0),
target/arm/machine.c +20 -0
index 239fe4e84d..6d14b08e0c 100644
@@ -604,6 +604,8 @@ static int cpu_pre_save(void *opaque)
 {
     ARMCPU *cpu = opaque;
 
+    pmu_op_start(&cpu->env);
+
     if (kvm_enabled()) {
         if (!write_kvmstate_to_list(cpu)) {
             /* This should never fail */
@@ -625,6 +627,20 @@ static int cpu_pre_save(void *opaque)
     return 0;
 }
 
+static int cpu_post_save(void *opaque)
+{
+    ARMCPU *cpu = opaque;
+    pmu_op_finish(&cpu->env);
+    return 0;
+}
+
+static int cpu_pre_load(void *opaque)
+{
+    ARMCPU *cpu = opaque;
+    pmu_op_start(&cpu->env);
+    return 0;
+}
+
 static int cpu_post_load(void *opaque, int version_id)
 {
     ARMCPU *cpu = opaque;
@@ -672,6 +688,8 @@ static int cpu_post_load(void *opaque, int version_id)
     hw_breakpoint_update_all(cpu);
     hw_watchpoint_update_all(cpu);
 
+    pmu_op_finish(&cpu->env);
+
     return 0;
 }
 
@@ -680,6 +698,8 @@ const VMStateDescription vmstate_arm_cpu = {
     .version_id = 22,
     .minimum_version_id = 22,
     .pre_save = cpu_pre_save,
+    .post_save = cpu_post_save,
+    .pre_load = cpu_pre_load,
     .post_load = cpu_post_load,
     .fields = (VMStateField[]) {
         VMSTATE_UINT32_ARRAY(env.regs, ARMCPU, 16),
Signature · 1 line
2.19.1
#8 lore raw

Re: [Qemu-arm] [PATCH v7 03/12] target/arm: Swap PMU values before/after migrations

Quoted 43 lines · Aaron Lindsay

Because of the PMU's design, many register accesses have side effects which are inter-related, meaning that the normal method of saving CP registers can result in inconsistent state. These side-effects are largely handled in pmu_op_start/finish functions which can be called before and after the state is saved/restored. By doing this and adding raw read/write functions for the affected registers, we avoid migration-related inconsistencies.

target/arm/machine.c +16 -0
@@ -604,6 +604,8 @@ static int cpu_pre_save(void *opaque)
 {
     ARMCPU *cpu = opaque;
 
+    pmu_op_start(&cpu->env);
+
     if (kvm_enabled()) {
         if (!write_kvmstate_to_list(cpu)) {
             /* This should never fail */
@@ -625,6 +627,20 @@ static int cpu_pre_save(void *opaque)
     return 0;
 }
 
+static int cpu_post_save(void *opaque)
+{
+    ARMCPU *cpu = opaque;
+    pmu_op_finish(&cpu->env);
+    return 0;
+}
+
+static int cpu_pre_load(void *opaque)
+{
+    ARMCPU *cpu = opaque;
+    pmu_op_start(&cpu->env);
+    return 0;
+}
+
 static int cpu_post_load(void *opaque, int version_id)
 {
     ARMCPU *cpu = opaque;

target/arm/machine.c static int cpu_post_load(void *opaque, int version_id) · line 694

Quoted 7 lines
target/arm/machine.c +2 -0
@@ -672,6 +688,8 @@ static int cpu_post_load(void *opaque, int version_id)
     hw_breakpoint_update_all(cpu);
     hw_watchpoint_update_all(cpu);
 
+    pmu_op_finish(&cpu->env);
+
     return 0;
 }

This will end up calling pmu_op_start() and pmu_op_finish() even if the guest is running KVM and we're not using the TCG code. Is that what you intended?

thanks
-- PMM

#9 lore raw

Re: [Qemu-arm] [PATCH v7 03/12] target/arm: Swap PMU values before/after migrations

Quoted 47 lines · Peter Maydell
Quoted 46 lines · Aaron Lindsay

Because of the PMU's design, many register accesses have side effects which are inter-related, meaning that the normal method of saving CP registers can result in inconsistent state. These side-effects are largely handled in pmu_op_start/finish functions which can be called before and after the state is saved/restored. By doing this and adding raw read/write functions for the affected registers, we avoid migration-related inconsistencies.

target/arm/machine.c +16 -0
@@ -604,6 +604,8 @@ static int cpu_pre_save(void *opaque)
 {
     ARMCPU *cpu = opaque;
 
+    pmu_op_start(&cpu->env);
+
     if (kvm_enabled()) {
         if (!write_kvmstate_to_list(cpu)) {
             /* This should never fail */
@@ -625,6 +627,20 @@ static int cpu_pre_save(void *opaque)
     return 0;
 }
 
+static int cpu_post_save(void *opaque)
+{
+    ARMCPU *cpu = opaque;
+    pmu_op_finish(&cpu->env);
+    return 0;
+}
+
+static int cpu_pre_load(void *opaque)
+{
+    ARMCPU *cpu = opaque;
+    pmu_op_start(&cpu->env);
+    return 0;
+}
+
 static int cpu_post_load(void *opaque, int version_id)
 {
     ARMCPU *cpu = opaque;
@@ -672,6 +688,8 @@ static int cpu_post_load(void *opaque, int version_id)
     hw_breakpoint_update_all(cpu);
     hw_watchpoint_update_all(cpu);
 
Quoted 8 lines

target/arm/machine.c static int cpu_post_load(void *opaque, int version_id) · line 694

Quoted 4 lines
target/arm/machine.c +2 -0
+    pmu_op_finish(&cpu->env);
+
     return 0;
 }

This will end up calling pmu_op_start() and pmu_op_finish() even if the guest is running KVM and we're not using the TCG code. Is that what you intended?

The counters are still stored in their 'difference' format for KVM, so I think this still makes sense. Or is there something I'm missing about how this will interact with KVM? I'm much more familiar with TCG.

-Aaron

#10 lore raw

Re: [Qemu-arm] [PATCH v7 03/12] target/arm: Swap PMU values before/after migrations

Quoted 57 lines · Aaron Lindsay
Quoted 47 lines · Peter Maydell
Quoted 46 lines · Aaron Lindsay

Because of the PMU's design, many register accesses have side effects which are inter-related, meaning that the normal method of saving CP registers can result in inconsistent state. These side-effects are largely handled in pmu_op_start/finish functions which can be called before and after the state is saved/restored. By doing this and adding raw read/write functions for the affected registers, we avoid migration-related inconsistencies.

target/arm/machine.c +16 -0
@@ -604,6 +604,8 @@ static int cpu_pre_save(void *opaque)
 {
     ARMCPU *cpu = opaque;
 
+    pmu_op_start(&cpu->env);
+
     if (kvm_enabled()) {
         if (!write_kvmstate_to_list(cpu)) {
             /* This should never fail */
@@ -625,6 +627,20 @@ static int cpu_pre_save(void *opaque)
     return 0;
 }
 
+static int cpu_post_save(void *opaque)
+{
+    ARMCPU *cpu = opaque;
+    pmu_op_finish(&cpu->env);
+    return 0;
+}
+
+static int cpu_pre_load(void *opaque)
+{
+    ARMCPU *cpu = opaque;
+    pmu_op_start(&cpu->env);
+    return 0;
+}
+
 static int cpu_post_load(void *opaque, int version_id)
 {
     ARMCPU *cpu = opaque;
@@ -672,6 +688,8 @@ static int cpu_post_load(void *opaque, int version_id)
     hw_breakpoint_update_all(cpu);
     hw_watchpoint_update_all(cpu);
 
Quoted 8 lines

target/arm/machine.c static int cpu_post_load(void *opaque, int version_id) · line 694

Quoted 4 lines
target/arm/machine.c +2 -0
+    pmu_op_finish(&cpu->env);
+
     return 0;
 }

This will end up calling pmu_op_start() and pmu_op_finish() even if the guest is running KVM and we're not using the TCG code. Is that what you intended?

Quoted 3 lines

The counters are still stored in their 'difference' format for KVM, so I think this still makes sense. Or is there something I'm missing about how this will interact with KVM? I'm much more familiar with TCG.

For KVM the counter values are stored in the kernel, until the write_kvmstate_to_list() function (which is performed after your pmu_op_start() call in cpu_pre_save()) writes them from the kernel into the cpreg_vmstate array. Similarly on load they go straight from the vmstate array into the kernel registers. It's not clear to me what the pmu_op_start()/finish() calls are intended to do in the KVM case, and they look at fields in the env->cp15 struct which will not have valid values at this point.

thanks
-- PMM

#11 lore raw

Re: [Qemu-arm] [PATCH v7 03/12] target/arm: Swap PMU values before/after migrations

Quoted 63 lines · Peter Maydell
Quoted 57 lines · Aaron Lindsay
Quoted 47 lines · Peter Maydell
Quoted 46 lines · Aaron Lindsay

Because of the PMU's design, many register accesses have side effects which are inter-related, meaning that the normal method of saving CP registers can result in inconsistent state. These side-effects are largely handled in pmu_op_start/finish functions which can be called before and after the state is saved/restored. By doing this and adding raw read/write functions for the affected registers, we avoid migration-related inconsistencies.

target/arm/machine.c +16 -0
@@ -604,6 +604,8 @@ static int cpu_pre_save(void *opaque)
 {
     ARMCPU *cpu = opaque;
 
+    pmu_op_start(&cpu->env);
+
     if (kvm_enabled()) {
         if (!write_kvmstate_to_list(cpu)) {
             /* This should never fail */
@@ -625,6 +627,20 @@ static int cpu_pre_save(void *opaque)
     return 0;
 }
 
+static int cpu_post_save(void *opaque)
+{
+    ARMCPU *cpu = opaque;
+    pmu_op_finish(&cpu->env);
+    return 0;
+}
+
+static int cpu_pre_load(void *opaque)
+{
+    ARMCPU *cpu = opaque;
+    pmu_op_start(&cpu->env);
+    return 0;
+}
+
 static int cpu_post_load(void *opaque, int version_id)
 {
     ARMCPU *cpu = opaque;
@@ -672,6 +688,8 @@ static int cpu_post_load(void *opaque, int version_id)
     hw_breakpoint_update_all(cpu);
     hw_watchpoint_update_all(cpu);
 
Quoted 8 lines

target/arm/machine.c static int cpu_post_load(void *opaque, int version_id) · line 694

Quoted 4 lines
target/arm/machine.c +2 -0
+    pmu_op_finish(&cpu->env);
+
     return 0;
 }

This will end up calling pmu_op_start() and pmu_op_finish() even if the guest is running KVM and we're not using the TCG code. Is that what you intended?

Quoted 3 lines

The counters are still stored in their 'difference' format for KVM, so I think this still makes sense. Or is there something I'm missing about how this will interact with KVM? I'm much more familiar with TCG.

Quoted 9 lines

For KVM the counter values are stored in the kernel, until the write_kvmstate_to_list() function (which is performed after your pmu_op_start() call in cpu_pre_save()) writes them from the kernel into the cpreg_vmstate array. Similarly on load they go straight from the vmstate array into the kernel registers. It's not clear to me what the pmu_op_start()/finish() calls are intended to do in the KVM case, and they look at fields in the env->cp15 struct which will not have valid values at this point.

Oh, I had a fundamental misunderstanding and expected the registers would be in env->cp15 when this was called, even for KVM.

After looking into this more, it seems like my pmu_op_* calls here should be contained in if (!kvm_enabled()) blocks. It doesn't seem like anything bad would happen otherwise, but it also isn't necessary or helpful to make those calls.

I'll make this change for v8 if you don't have further feedback.

-Aaron

#12 lore raw

PATCH v7 4/12 target/arm: Filter cycle counter based on PMCCFILTR_EL0

In reply to Aaron Lindsay

Rename arm_ccnt_enabled to pmu_counter_enabled, and add logic to only return 'true' if the specified counter is enabled and neither prohibited or filtered.

---
 target/arm/cpu.c    |  3 ++
 target/arm/cpu.h    | 10 ++++-
 target/arm/helper.c | 96 +++++++++++++++++++++++++++++++++++++++++----
 3 files changed, 101 insertions(+), 8 deletions(-)
target/arm/cpu.c +3 -0
index 784a4c2dfc..9e54c56379 100644
@@ -957,6 +957,9 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
     if (!cpu->has_pmu) {
         unset_feature(env, ARM_FEATURE_PMU);
         cpu->id_aa64dfr0 &= ~0xf00;
+    } else if (!kvm_enabled()) {
+        arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0);
+        arm_register_el_change_hook(cpu, &pmu_post_el_change, 0);
     }
 
     if (!arm_feature(env, ARM_FEATURE_EL2)) {
target/arm/cpu.h +9 -1
index 50a0862c84..92282cd976 100644
@@ -985,6 +985,12 @@ void pmccntr_op_finish(CPUARMState *env);
 void pmu_op_start(CPUARMState *env);
 void pmu_op_finish(CPUARMState *env);
 
+/**
+ * Functions to register as EL change hooks for PMU mode filtering
+ */
+void pmu_pre_el_change(ARMCPU *cpu, void *ignored);
+void pmu_post_el_change(ARMCPU *cpu, void *ignored);
+
 /* SCTLR bit meanings. Several bits have been reused in newer
  * versions of the architecture; in that case we define constants
  * for both old and new bit meanings. Code which tests against those
@@ -1046,7 +1052,8 @@ void pmu_op_finish(CPUARMState *env);
 
 #define MDCR_EPMAD    (1U << 21)
 #define MDCR_EDAD     (1U << 20)
-#define MDCR_SPME     (1U << 17)
+#define MDCR_SPME     (1U << 17)  /* MDCR_EL3 */
+#define MDCR_HPMD     (1U << 17)  /* MDCR_EL2 */
 #define MDCR_SDD      (1U << 16)
 #define MDCR_SPD      (3U << 14)
 #define MDCR_TDRA     (1U << 11)
@@ -1056,6 +1063,7 @@ void pmu_op_finish(CPUARMState *env);
 #define MDCR_HPME     (1U << 7)
 #define MDCR_TPM      (1U << 6)
 #define MDCR_TPMCR    (1U << 5)
+#define MDCR_HPMN     (0x1fU)
 
 /* Not all of the MDCR_EL3 bits are present in the 32-bit SDCR */
 #define SDCR_VALID_MASK (MDCR_EPMAD | MDCR_EDAD | MDCR_SPME | MDCR_SPD)
target/arm/helper.c +89 -7

141 lines not on this page · raw message

Signature · 1 line
2.19.1
#13 lore raw

PATCH v7 5/12 target/arm: Allow AArch32 access for PMCCFILTR

In reply to Aaron Lindsay
---
 target/arm/helper.c | 27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)
target/arm/helper.c +26 -1
index 63d4e993f4..0522a606a4 100644
@@ -994,6 +994,10 @@ static const ARMCPRegInfo v6_cp_reginfo[] = {
                                PMXEVTYPER_M | PMXEVTYPER_MT | \
                                PMXEVTYPER_EVTCOUNT)
 
+#define PMCCFILTR             0xf8000000
+#define PMCCFILTR_M           PMXEVTYPER_M
+#define PMCCFILTR_EL0         (PMCCFILTR | PMCCFILTR_M)
+
 static inline uint32_t pmu_num_counters(CPUARMState *env)
 {
   return (env->cp15.c9_pmcr & PMCRN_MASK) >> PMCRN_SHIFT;
@@ -1297,10 +1301,26 @@ static void pmccfiltr_write(CPUARMState *env, const ARMCPRegInfo *ri,
                             uint64_t value)
 {
     pmccntr_op_start(env);
-    env->cp15.pmccfiltr_el0 = value & 0xfc000000;
+    env->cp15.pmccfiltr_el0 = value & PMCCFILTR_EL0;
+    pmccntr_op_finish(env);
+}
+
+static void pmccfiltr_write_a32(CPUARMState *env, const ARMCPRegInfo *ri,
+                            uint64_t value)
+{
+    pmccntr_op_start(env);
+    /* M is not accessible from AArch32 */
+    env->cp15.pmccfiltr_el0 = (env->cp15.pmccfiltr_el0 & PMCCFILTR_M) |
+        (value & PMCCFILTR);
     pmccntr_op_finish(env);
 }
 
+static uint64_t pmccfiltr_read_a32(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+    /* M is not visible in AArch32 */
+    return env->cp15.pmccfiltr_el0 & PMCCFILTR;
+}
+
 static void pmcntenset_write(CPUARMState *env, const ARMCPRegInfo *ri,
                             uint64_t value)
 {
@@ -1536,6 +1556,11 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .readfn = pmccntr_read, .writefn = pmccntr_write,
       .raw_readfn = raw_read, .raw_writefn = raw_write, },
 #endif
+    { .name = "PMCCFILTR", .cp = 15, .opc1 = 0, .crn = 14, .crm = 15, .opc2 = 7,
+      .writefn = pmccfiltr_write_a32, .readfn = pmccfiltr_read_a32,
+      .access = PL0_RW, .accessfn = pmreg_access,
+      .type = ARM_CP_ALIAS | ARM_CP_IO,
+      .resetvalue = 0, },
     { .name = "PMCCFILTR_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 15, .opc2 = 7,
       .writefn = pmccfiltr_write, .raw_writefn = raw_write,
Signature · 1 line
2.19.1
#14 lore raw

PATCH v7 6/12 target/arm: Implement PMOVSSET

In reply to Aaron Lindsay

Add an array for PMOVSSET so we only define it for v7ve+ platforms

---
 target/arm/helper.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
target/arm/helper.c +28 -0
index 0522a606a4..6724d97346 100644
@@ -1342,6 +1342,13 @@ static void pmovsr_write(CPUARMState *env, const ARMCPRegInfo *ri,
     env->cp15.c9_pmovsr &= ~value;
 }
 
+static void pmovsset_write(CPUARMState *env, const ARMCPRegInfo *ri,
+                         uint64_t value)
+{
+    value &= pmu_counter_mask(env);
+    env->cp15.c9_pmovsr |= value;
+}
+
 static void pmxevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri,
                              uint64_t value)
 {
@@ -1709,6 +1716,24 @@ static const ARMCPRegInfo v7mp_cp_reginfo[] = {
     REGINFO_SENTINEL
 };
 
+static const ARMCPRegInfo pmovsset_cp_reginfo[] = {
+    /* PMOVSSET is not implemented in v7 before v7ve */
+    { .name = "PMOVSSET", .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 3,
+      .access = PL0_RW, .accessfn = pmreg_access,
+      .type = ARM_CP_ALIAS,
+      .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmovsr),
+      .writefn = pmovsset_write,
+      .raw_writefn = raw_write },
+    { .name = "PMOVSSET_EL0", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 14, .opc2 = 3,
+      .access = PL0_RW, .accessfn = pmreg_access,
+      .type = ARM_CP_ALIAS,
+      .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr),
+      .writefn = pmovsset_write,
+      .raw_writefn = raw_write },
+    REGINFO_SENTINEL
+};
+
 static void teecr_write(CPUARMState *env, const ARMCPRegInfo *ri,
                         uint64_t value)
 {
@@ -5212,6 +5237,9 @@ void register_cp_regs_for_features(ARMCPU *cpu)
         !arm_feature(env, ARM_FEATURE_PMSA)) {
         define_arm_cp_regs(cpu, v7mp_cp_reginfo);
     }
+    if (arm_feature(env, ARM_FEATURE_V7VE)) {
+        define_arm_cp_regs(cpu, pmovsset_cp_reginfo);
+    }
     if (arm_feature(env, ARM_FEATURE_V7)) {
         /* v7 performance monitor control register: same implementor
          * field as main ID register, and we implement only the cycle
Signature · 1 line
2.19.1
#15 lore raw

PATCH v7 7/12 target/arm: Add array for supported PMU events, generate PMCEID[01]

In reply to Aaron Lindsay

This commit doesn't add any supported events, but provides the framework for adding them. We store the pm_event structs in a simple array, and provide the mapping from the event numbers to array indexes in the supported_event_map array. Because the value of PMCEID[01] depends upon which events are supported at runtime, generate it dynamically.

---
 target/arm/cpu.c    | 20 +++++++++++++-------
 target/arm/cpu.h    | 10 ++++++++++
 target/arm/cpu64.c  |  4 ----
 target/arm/helper.c | 42 ++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 65 insertions(+), 11 deletions(-)
target/arm/cpu.c +13 -7
index 9e54c56379..d1c766d180 100644
@@ -957,9 +957,19 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
     if (!cpu->has_pmu) {
         unset_feature(env, ARM_FEATURE_PMU);
         cpu->id_aa64dfr0 &= ~0xf00;
-    } else if (!kvm_enabled()) {
-        arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0);
-        arm_register_el_change_hook(cpu, &pmu_post_el_change, 0);
+    }
+    if (arm_feature(env, ARM_FEATURE_PMU)) {
+        uint64_t pmceid = get_pmceid(&cpu->env);
+        cpu->pmceid0 = extract64(pmceid, 0, 32);
+        cpu->pmceid1 = extract64(pmceid, 32, 32);
+
+        if (!kvm_enabled()) {
+            arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0);
+            arm_register_el_change_hook(cpu, &pmu_post_el_change, 0);
+        }
+    } else {
+        cpu->pmceid0 = 0x00000000;
+        cpu->pmceid1 = 0x00000000;
     }
 
     if (!arm_feature(env, ARM_FEATURE_EL2)) {
@@ -1601,8 +1611,6 @@ static void cortex_a7_initfn(Object *obj)
     cpu->id_pfr0 = 0x00001131;
     cpu->id_pfr1 = 0x00011011;
     cpu->id_dfr0 = 0x02010555;
-    cpu->pmceid0 = 0x00000000;
-    cpu->pmceid1 = 0x00000000;
     cpu->id_afr0 = 0x00000000;
     cpu->id_mmfr0 = 0x10101105;
     cpu->id_mmfr1 = 0x40000000;
@@ -1647,8 +1655,6 @@ static void cortex_a15_initfn(Object *obj)
     cpu->id_pfr0 = 0x00001131;
     cpu->id_pfr1 = 0x00011011;
     cpu->id_dfr0 = 0x02010555;
-    cpu->pmceid0 = 0x0000000;
-    cpu->pmceid1 = 0x00000000;
     cpu->id_afr0 = 0x00000000;
     cpu->id_mmfr0 = 0x10201105;
     cpu->id_mmfr1 = 0x20000000;
target/arm/cpu.h +10 -0
index 92282cd976..f991ff370e 100644
@@ -991,6 +991,16 @@ void pmu_op_finish(CPUARMState *env);
 void pmu_pre_el_change(ARMCPU *cpu, void *ignored);
 void pmu_post_el_change(ARMCPU *cpu, void *ignored);
 
+/*
+ * get_pmceid
+ * @env: CPUARMState
+ *
+ * Return the PMCEID[01] register values corresponding to the counters which
+ * are supported given the current configuration (0 is low 32, 1 is high 32
+ * bits)
+ */
+uint64_t get_pmceid(CPUARMState *env);
+
 /* SCTLR bit meanings. Several bits have been reused in newer
  * versions of the architecture; in that case we define constants
  * for both old and new bit meanings. Code which tests against those
target/arm/cpu64.c +0 -4
index 873f059bf2..a1aad772fa 100644
@@ -138,8 +138,6 @@ static void aarch64_a57_initfn(Object *obj)
     cpu->isar.id_isar6 = 0;
     cpu->isar.id_aa64pfr0 = 0x00002222;
     cpu->id_aa64dfr0 = 0x10305106;
-    cpu->pmceid0 = 0x00000000;
-    cpu->pmceid1 = 0x00000000;
     cpu->isar.id_aa64isar0 = 0x00011120;
     cpu->id_aa64mmfr0 = 0x00001124;
     cpu->dbgdidr = 0x3516d000;
@@ -246,8 +244,6 @@ static void aarch64_a72_initfn(Object *obj)
     cpu->isar.id_isar5 = 0x00011121;
     cpu->isar.id_aa64pfr0 = 0x00002222;
     cpu->id_aa64dfr0 = 0x10305106;
-    cpu->pmceid0 = 0x00000000;
-    cpu->pmceid1 = 0x00000000;
     cpu->isar.id_aa64isar0 = 0x00011120;
     cpu->id_aa64mmfr0 = 0x00001124;
     cpu->dbgdidr = 0x3516d000;
target/arm/helper.c +42 -0

48 lines not on this page · raw message

Signature · 1 line
2.19.1
#16 lore raw

Re: [Qemu-arm] [PATCH v7 07/12] target/arm: Add array for supported PMU events, generate PMCEID[01]

Quoted 29 lines · Aaron Lindsay

This commit doesn't add any supported events, but provides the framework for adding them. We store the pm_event structs in a simple array, and provide the mapping from the event numbers to array indexes in the supported_event_map array. Because the value of PMCEID[01] depends upon which events are supported at runtime, generate it dynamically.

---
 target/arm/cpu.c    | 20 +++++++++++++-------
 target/arm/cpu.h    | 10 ++++++++++
 target/arm/cpu64.c  |  4 ----
 target/arm/helper.c | 42 ++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 65 insertions(+), 11 deletions(-)
target/arm/cpu.c +4 -3
index 9e54c56379..d1c766d180 100644
@@ -957,9 +957,19 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
     if (!cpu->has_pmu) {
         unset_feature(env, ARM_FEATURE_PMU);
         cpu->id_aa64dfr0 &= ~0xf00;
-    } else if (!kvm_enabled()) {
-        arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0);
-        arm_register_el_change_hook(cpu, &pmu_post_el_change, 0);
+    }
+    if (arm_feature(env, ARM_FEATURE_PMU)) {
+        uint64_t pmceid = get_pmceid(&cpu->env);
+        cpu->pmceid0 = extract64(pmceid, 0, 32);

target/arm/cpu.c static void arm_cpu_realizefn(DeviceState *dev, Error **errp) · line 973

Quoted 10 lines
target/arm/cpu.c +9 -0
+        cpu->pmceid1 = extract64(pmceid, 32, 32);
+
+        if (!kvm_enabled()) {
+            arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0);
+            arm_register_el_change_hook(cpu, &pmu_post_el_change, 0);
+        }
+    } else {
+        cpu->pmceid0 = 0x00000000;
+        cpu->pmceid1 = 0x00000000;
     }

This now sets one of the ID registers for "we have no PMU" in the first "if (!cpu->has_pmu)" statement (id_aa64dfr0), and some of them (pmceid0, pcmeid1) in this else clause at the end. We should put them all in the same place.

Quoted 27 lines
target/arm/cpu.c +0 -4
     if (!arm_feature(env, ARM_FEATURE_EL2)) {
@@ -1601,8 +1611,6 @@ static void cortex_a7_initfn(Object *obj)
     cpu->id_pfr0 = 0x00001131;
     cpu->id_pfr1 = 0x00011011;
     cpu->id_dfr0 = 0x02010555;
-    cpu->pmceid0 = 0x00000000;
-    cpu->pmceid1 = 0x00000000;
     cpu->id_afr0 = 0x00000000;
     cpu->id_mmfr0 = 0x10101105;
     cpu->id_mmfr1 = 0x40000000;
@@ -1647,8 +1655,6 @@ static void cortex_a15_initfn(Object *obj)
     cpu->id_pfr0 = 0x00001131;
     cpu->id_pfr1 = 0x00011011;
     cpu->id_dfr0 = 0x02010555;
-    cpu->pmceid0 = 0x0000000;
-    cpu->pmceid1 = 0x00000000;
     cpu->id_afr0 = 0x00000000;
     cpu->id_mmfr0 = 0x10201105;
     cpu->id_mmfr1 = 0x20000000;
target/arm/cpu.h +0 -0
index 92282cd976..f991ff370e 100644
@@ -991,6 +991,16 @@ void pmu_op_finish(CPUARMState *env);
 void pmu_pre_el_change(ARMCPU *cpu, void *ignored);
 void pmu_post_el_change(ARMCPU *cpu, void *ignored);

target/arm/cpu.h void pmu_op_finish(CPUARMState *env); · line 1002

Quoted 10 lines
target/arm/cpu.h +9 -0
 
+/*
+ * get_pmceid
+ * @env: CPUARMState
+ *
+ * Return the PMCEID[01] register values corresponding to the counters which
+ * are supported given the current configuration (0 is low 32, 1 is high 32
+ * bits)
+ */
+uint64_t get_pmceid(CPUARMState *env);

This doesn't look like the right API, because in AArch64 PMCEID0_EL0 and PMCEID1_EL0 are both 64-bit registers, so you can't fit them both into a single uint64_t.

thanks
-- PMM

#17 lore raw

Re: [Qemu-arm] [PATCH v7 07/12] target/arm: Add array for supported PMU events, generate PMCEID[01]

Quoted 21 lines · Peter Maydell
Quoted 20 lines · Aaron Lindsay
target/arm/cpu.c +11 -3
@@ -957,9 +957,19 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
     if (!cpu->has_pmu) {
         unset_feature(env, ARM_FEATURE_PMU);
         cpu->id_aa64dfr0 &= ~0xf00;
-    } else if (!kvm_enabled()) {
-        arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0);
-        arm_register_el_change_hook(cpu, &pmu_post_el_change, 0);
+    }
+    if (arm_feature(env, ARM_FEATURE_PMU)) {
+        uint64_t pmceid = get_pmceid(&cpu->env);
+        cpu->pmceid0 = extract64(pmceid, 0, 32);
+        cpu->pmceid1 = extract64(pmceid, 32, 32);
+
+        if (!kvm_enabled()) {
+            arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0);
+            arm_register_el_change_hook(cpu, &pmu_post_el_change, 0);
+        }
+    } else {
Quoted 8 lines

target/arm/cpu.c static void arm_cpu_realizefn(DeviceState *dev, Error **errp) · line 973

Quoted 3 lines
target/arm/cpu.c +2 -0
+        cpu->pmceid0 = 0x00000000;
+        cpu->pmceid1 = 0x00000000;
     }

This now sets one of the ID registers for "we have no PMU" in the first "if (!cpu->has_pmu)" statement (id_aa64dfr0), and some of them (pmceid0, pcmeid1) in this else clause at the end. We should put them all in the same place.

I agree that would be cleaner - I'll move the id_aa64dfr0 update to later else clause.

Quoted 5 lines
Quoted 5 lines
target/arm/cpu.c +5 -0
+/*
+ * get_pmceid
+ * @env: CPUARMState
+ *
+ * Return the PMCEID[01] register values corresponding to the counters which
Quoted 8 lines
Quoted 4 lines

+ * are supported given the current configuration (0 is low 32, 1 is high 32
+ * bits)
+ */
+uint64_t get_pmceid(CPUARMState *env);

This doesn't look like the right API, because in AArch64 PMCEID0_EL0 and PMCEID1_EL0 are both 64-bit registers, so you can't fit them both into a single uint64_t.

Heh, I think I started working on this long enough ago that I was using a copy of the ARMv8.0 ARM - before the statistical profiling extensions were announced. I believe those are the only currently-defined common events >= 0x4000, so they're the only bits defined in the upper 32 bits of PMCEID[01].

Now that I look at it, pmceid[01] are currently only defined as uint32_t, and we don't have PMCEID[23] for the high bits for AArch32. Perhaps that should be a separate patch.

At any rate, I'll plan to update this the following signature for the next version, where which is [01] for which PMCEID is being requested. For now I'll probably just put a comment about not supporting the 0x40xx events, since I don't know that coming up with a sparse array is worth it, but the signature will be appropriate if we add support later:

uint64_t get_pmceid(CPUARMState *env, unsigned which);

-Aaron

#18 lore raw

PATCH v7 8/12 target/arm: Finish implementation of PM[X]EVCNTR and PM[X]EVTYPER

In reply to Aaron Lindsay

Add arrays to hold the registers, the definitions themselves, access functions, and logic to reset counters when PMCR.P is set. Update filtering code to support counters other than PMCCNTR. Support migration with raw read/write functions.

---
 target/arm/cpu.h    |   3 +
 target/arm/helper.c | 296 +++++++++++++++++++++++++++++++++++++++++---
 2 files changed, 282 insertions(+), 17 deletions(-)
target/arm/cpu.h +3 -0
index f991ff370e..067f6efdb6 100644
@@ -482,6 +482,9 @@ typedef struct CPUARMState {
          * pmccntr_op_finish.
          */
         uint64_t c15_ccnt_delta;
+        uint64_t c14_pmevcntr[31];
+        uint64_t c14_pmevcntr_delta[31];
+        uint64_t c14_pmevtyper[31];
         uint64_t pmccfiltr_el0; /* Performance Monitor Filter Register */
         uint64_t vpidr_el2; /* Virtualization Processor ID Register */
         uint64_t vmpidr_el2; /* Virtualization Multiprocessor ID Register */
target/arm/helper.c +279 -17

397 lines not on this page · raw message

Signature · 1 line
2.19.1
#19 lore raw

PATCH v7 9/12 target/arm: PMU: Add instruction and cycle events

In reply to Aaron Lindsay

The instruction event is only enabled when icount is used, cycles are always supported. Always defining get_cycle_count (but altering its behavior depending on CONFIG_USER_ONLY) allows us to remove some CONFIG_USER_ONLY #defines throughout the rest of the code.

---
 target/arm/helper.c | 90 ++++++++++++++++++++++-----------------------
 1 file changed, 44 insertions(+), 46 deletions(-)
target/arm/helper.c +44 -46
index b7297d72a8..e3ec36490c 100644
@@ -15,6 +15,7 @@
 #include "arm_ldst.h"
 #include <zlib.h> /* For crc32 */
 #include "exec/semihost.h"
+#include "sysemu/cpus.h"
 #include "sysemu/kvm.h"
 #include "fpu/softfloat.h"
 #include "qemu/range.h"
@@ -1021,9 +1022,50 @@ typedef struct pm_event {
     uint64_t (*get_count)(CPUARMState *);
 } pm_event;
 
+static bool event_always_supported(CPUARMState *env)
+{
+    return true;
+}
+
+/*
+ * Return the underlying cycle count for the PMU cycle counters. If we're in
+ * usermode, simply return 0.
+ */
+static uint64_t cycles_get_count(CPUARMState *env)
+{
+#ifndef CONFIG_USER_ONLY
+    return muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
+                   ARM_CPU_FREQ, NANOSECONDS_PER_SECOND);
+#else
+    return cpu_get_host_ticks();
+#endif
+}
+
+#ifndef CONFIG_USER_ONLY
+static bool instructions_supported(CPUARMState *env)
+{
+    return use_icount == 1 /* Precise instruction counting */;
+}
+
+static uint64_t instructions_get_count(CPUARMState *env)
+{
+    return (uint64_t)cpu_get_icount_raw();
+}
+#endif
+
 static const pm_event pm_events[] = {
+#ifndef CONFIG_USER_ONLY
+    { .number = 0x008, /* INST_RETIRED, Instruction architecturally executed */
+      .supported = instructions_supported,
+      .get_count = instructions_get_count,
+    },
+    { .number = 0x011, /* CPU_CYCLES, Cycle */
+      .supported = event_always_supported,
+      .get_count = cycles_get_count,
+    }
+#endif
 };
-#define MAX_EVENT_ID 0x0
+#define MAX_EVENT_ID 0x11
 #define UNSUPPORTED_EVENT UINT16_MAX
 static uint16_t supported_event_map[MAX_EVENT_ID + 1];
 
@@ -1116,8 +1158,6 @@ static CPAccessResult pmreg_access_swinc(CPUARMState *env,
     return pmreg_access(env, ri, isread);
 }
 
-#ifndef CONFIG_USER_ONLY
-
 static CPAccessResult pmreg_access_selr(CPUARMState *env,
                                         const ARMCPRegInfo *ri,
                                         bool isread)
@@ -1228,9 +1268,7 @@ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter)
  */
 void pmccntr_op_start(CPUARMState *env)
 {
-    uint64_t cycles = 0;
-    cycles = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
-                          ARM_CPU_FREQ, NANOSECONDS_PER_SECOND);
+    uint64_t cycles = cycles_get_count(env);
 
     if (pmu_counter_enabled(env, 31)) {
         uint64_t eff_cycles = cycles;
@@ -1376,42 +1414,6 @@ static void pmccntr_write32(CPUARMState *env, const ARMCPRegInfo *ri,
     pmccntr_write(env, ri, deposit64(cur_val, 0, 32, value));
 }
 
-#else /* CONFIG_USER_ONLY */
-
-void pmccntr_op_start(CPUARMState *env)
-{
-}
-
-void pmccntr_op_finish(CPUARMState *env)
-{
-}
-
-void pmevcntr_op_start(CPUARMState *env, uint8_t i)
-{
-}
-
-void pmevcntr_op_finish(CPUARMState *env, uint8_t i)
-{
-}
-
-void pmu_op_start(CPUARMState *env)
-{
-}
-
-void pmu_op_finish(CPUARMState *env)
-{
-}
-
-void pmu_pre_el_change(ARMCPU *cpu, void *ignored)
-{
-}
-
-void pmu_post_el_change(ARMCPU *cpu, void *ignored)
-{
-}
-
-#endif
-
 static void pmccfiltr_write(CPUARMState *env, const ARMCPRegInfo *ri,
                             uint64_t value)
 {
@@ -1799,7 +1801,6 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
     /* Unimplemented so WI. */
     { .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4,
       .access = PL0_W, .accessfn = pmreg_access_swinc, .type = ARM_CP_NOP },
-#ifndef CONFIG_USER_ONLY
     { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5,
       .access = PL0_RW, .type = ARM_CP_ALIAS,
       .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmselr),
@@ -1821,7 +1822,6 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .fieldoffset = offsetof(CPUARMState, cp15.c15_ccnt),
       .readfn = pmccntr_read, .writefn = pmccntr_write,
       .raw_readfn = raw_read, .raw_writefn = raw_write, },
-#endif
     { .name = "PMCCFILTR", .cp = 15, .opc1 = 0, .crn = 14, .crm = 15, .opc2 = 7,
       .writefn = pmccfiltr_write_a32, .readfn = pmccfiltr_read_a32,
       .access = PL0_RW, .accessfn = pmreg_access,
@@ -5512,7 +5512,6 @@ void register_cp_regs_for_features(ARMCPU *cpu)
          * count register.
          */
         unsigned int i, pmcrn = 0;
-#ifndef CONFIG_USER_ONLY
         ARMCPRegInfo pmcr = {
             .name = "PMCR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 0,
             .access = PL0_RW,
@@ -5569,7 +5568,6 @@ void register_cp_regs_for_features(ARMCPU *cpu)
             g_free(pmevtyper_name);
             g_free(pmevtyper_el0_name);
         }
-#endif
         ARMCPRegInfo clidr = {
             .name = "CLIDR", .state = ARM_CP_STATE_BOTH,
             .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 1,
Signature · 1 line
2.19.1
#20 lore raw

PATCH v7 10/12 target/arm: PMU: Set PMCR.N to 4

In reply to Aaron Lindsay

This both advertises that we support four counters and enables them because the pmu_num_counters() reads this value from PMCR.

---
 target/arm/helper.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
target/arm/helper.c +5 -5
index e3ec36490c..11eb62bdda 100644
@@ -1753,7 +1753,7 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .access = PL1_W, .type = ARM_CP_NOP },
     /* Performance monitors are implementation defined in v7,
      * but with an ARM recommended set of registers, which we
-     * follow (although we don't actually implement any counters)
+     * follow.
      *
      * Performance registers fall into three categories:
      *  (a) always UNDEF in PL0, RW in PL1 (PMINTENSET, PMINTENCLR)
@@ -5508,10 +5508,10 @@ void register_cp_regs_for_features(ARMCPU *cpu)
     }
     if (arm_feature(env, ARM_FEATURE_V7)) {
         /* v7 performance monitor control register: same implementor
-         * field as main ID register, and we implement only the cycle
-         * count register.
+         * field as main ID register, and we implement four counters in
+         * addition to the cycle count register.
          */
-        unsigned int i, pmcrn = 0;
+        unsigned int i, pmcrn = 4;
         ARMCPRegInfo pmcr = {
             .name = "PMCR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 0,
             .access = PL0_RW,
@@ -5526,7 +5526,7 @@ void register_cp_regs_for_features(ARMCPU *cpu)
             .access = PL0_RW, .accessfn = pmreg_access,
             .type = ARM_CP_IO,
             .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcr),
-            .resetvalue = cpu->midr & 0xff000000,
+            .resetvalue = (cpu->midr & 0xff000000) | (pmcrn << PMCRN_SHIFT),
             .writefn = pmcr_write, .raw_writefn = raw_write,
         };
         define_one_arm_cp_reg(cpu, &pmcr);
Signature · 1 line
2.19.1
Reviewed-by on v7 10/12
#21 lore raw

Re: [Qemu-arm] [PATCH v7 10/12] target/arm: PMU: Set PMCR.N to 4

Quoted 37 lines · Aaron Lindsay

This both advertises that we support four counters and enables them because the pmu_num_counters() reads this value from PMCR.

---
 target/arm/helper.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
target/arm/helper.c +4 -4
index e3ec36490c..11eb62bdda 100644
@@ -1753,7 +1753,7 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .access = PL1_W, .type = ARM_CP_NOP },
     /* Performance monitors are implementation defined in v7,
      * but with an ARM recommended set of registers, which we
-     * follow (although we don't actually implement any counters)
+     * follow.
      *
      * Performance registers fall into three categories:
      *  (a) always UNDEF in PL0, RW in PL1 (PMINTENSET, PMINTENCLR)
@@ -5508,10 +5508,10 @@ void register_cp_regs_for_features(ARMCPU *cpu)
     }
     if (arm_feature(env, ARM_FEATURE_V7)) {
         /* v7 performance monitor control register: same implementor
-         * field as main ID register, and we implement only the cycle
-         * count register.
+         * field as main ID register, and we implement four counters in
+         * addition to the cycle count register.
          */
-        unsigned int i, pmcrn = 0;
+        unsigned int i, pmcrn = 4;
         ARMCPRegInfo pmcr = {
             .name = "PMCR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 0,
             .access = PL0_RW,

target/arm/helper.c void register_cp_regs_for_features(ARMCPU *cpu)

Quoted 9 lines
target/arm/helper.c +1 -2
@@ -5526,7 +5526,7 @@ void register_cp_regs_for_features(ARMCPU *cpu)
             .access = PL0_RW, .accessfn = pmreg_access,
             .type = ARM_CP_IO,
             .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcr),
-            .resetvalue = cpu->midr & 0xff000000,
+            .resetvalue = (cpu->midr & 0xff000000) | (pmcrn << PMCRN_SHIFT),
             .writefn = pmcr_write, .raw_writefn = raw_write,
         };
         define_one_arm_cp_reg(cpu, &pmcr);
--

With PMCR.N > 0, this means that MDCR_EL2.HPMN behaviour and more generally support for the EL2 performance monitor trapping options in MDCR_EL2 become relevant. But I think we're probably best off leaving that for a future patchset.

thanks
-- PMM

#22 lore raw

PATCH v7 11/12 target/arm: Implement PMSWINC

In reply to Aaron Lindsay
---
 target/arm/helper.c | 39 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)
target/arm/helper.c +37 -2
index 11eb62bdda..cff3a5a562 100644
@@ -1027,6 +1027,15 @@ static bool event_always_supported(CPUARMState *env)
     return true;
 }
 
+static uint64_t swinc_get_count(CPUARMState *env)
+{
+    /*
+     * SW_INCR events are written directly to the pmevcntr's by writes to
+     * PMSWINC, so there is no underlying count maintained by the PMU itself
+     */
+    return 0;
+}
+
 /*
  * Return the underlying cycle count for the PMU cycle counters. If we're in
  * usermode, simply return 0.
@@ -1054,6 +1063,10 @@ static uint64_t instructions_get_count(CPUARMState *env)
 #endif
 
 static const pm_event pm_events[] = {
+    { .number = 0x000, /* SW_INCR */
+      .supported = event_always_supported,
+      .get_count = swinc_get_count,
+    },
 #ifndef CONFIG_USER_ONLY
     { .number = 0x008, /* INST_RETIRED, Instruction architecturally executed */
       .supported = instructions_supported,
@@ -1378,6 +1391,24 @@ static void pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
     pmu_op_finish(env);
 }
 
+static void pmswinc_write(CPUARMState *env, const ARMCPRegInfo *ri,
+                          uint64_t value)
+{
+    unsigned int i;
+    for (i = 0; i < pmu_num_counters(env); i++) {
+        /* Increment a counter's count iff: */
+        if ((value & (1 << i)) && /* counter's bit is set */
+                /* counter is enabled and not filtered */
+                pmu_counter_enabled(env, i) &&
+                /* counter is SW_INCR */
+                (env->cp15.c14_pmevtyper[i] & PMXEVTYPER_EVTCOUNT) == 0x0) {
+            pmevcntr_op_start(env, i);
+            env->cp15.c14_pmevcntr[i]++;
+            pmevcntr_op_finish(env, i);
+        }
+    }
+}
+
 static uint64_t pmccntr_read(CPUARMState *env, const ARMCPRegInfo *ri)
 {
     uint64_t ret;
@@ -1798,9 +1829,13 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr),
       .writefn = pmovsr_write,
       .raw_writefn = raw_write },
-    /* Unimplemented so WI. */
     { .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4,
-      .access = PL0_W, .accessfn = pmreg_access_swinc, .type = ARM_CP_NOP },
+      .access = PL0_W, .accessfn = pmreg_access_swinc, .type = ARM_CP_NO_RAW,
+      .writefn = pmswinc_write },
+    { .name = "PMSWINC_EL0", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 4,
+      .access = PL0_W, .accessfn = pmreg_access_swinc, .type = ARM_CP_NO_RAW,
+      .writefn = pmswinc_write },
     { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5,
       .access = PL0_RW, .type = ARM_CP_ALIAS,
       .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmselr),
Signature · 1 line
2.19.1
#23 lore raw

PATCH v7 12/12 target/arm: Send interrupts on PMU counter overflow

In reply to Aaron Lindsay

Setup a QEMUTimer to get a callback when we expect counters to next overflow and trigger an interrupt at that time.

---
 target/arm/cpu.c    |  11 ++++
 target/arm/cpu.h    |   7 +++
 target/arm/helper.c | 126 +++++++++++++++++++++++++++++++++++++++++---
 3 files changed, 138 insertions(+), 6 deletions(-)
target/arm/cpu.c +11 -0
index d1c766d180..7cb6a76afb 100644
@@ -764,6 +764,12 @@ static void arm_cpu_finalizefn(Object *obj)
         QLIST_REMOVE(hook, node);
         g_free(hook);
     }
+#ifndef CONFIG_USER_ONLY
+    if (arm_feature(&cpu->env, ARM_FEATURE_PMU)) {
+        timer_deinit(cpu->pmu_timer);
+        timer_free(cpu->pmu_timer);
+    }
+#endif
 }
 
 static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
@@ -967,6 +973,11 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
             arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0);
             arm_register_el_change_hook(cpu, &pmu_post_el_change, 0);
         }
+
+#ifndef CONFIG_USER_ONLY
+        cpu->pmu_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, arm_pmu_timer_cb,
+                cpu);
+#endif
     } else {
         cpu->pmceid0 = 0x00000000;
         cpu->pmceid1 = 0x00000000;
target/arm/cpu.h +7 -0
index 067f6efdb6..fa49dc4c47 100644
@@ -730,6 +730,8 @@ struct ARMCPU {
 
     /* Timers used by the generic (architected) timer */
     QEMUTimer *gt_timer[NUM_GTIMERS];
+    /* Timer used by the PMU */
+    QEMUTimer *pmu_timer;
     /* GPIO outputs for generic timer */
     qemu_irq gt_timer_outputs[NUM_GTIMERS];
     /* GPIO output for GICv3 maintenance interrupt signal */
@@ -988,6 +990,11 @@ void pmccntr_op_finish(CPUARMState *env);
 void pmu_op_start(CPUARMState *env);
 void pmu_op_finish(CPUARMState *env);
 
+/**
+ * Called when a PMU counter is due to overflow
+ */
+void arm_pmu_timer_cb(void *opaque);
+
 /**
  * Functions to register as EL change hooks for PMU mode filtering
  */
target/arm/helper.c +120 -6

260 lines not on this page · raw message

Signature · 1 line
2.19.1
#24 lore raw

Re: [Qemu-devel] [PATCH v7 12/12] target/arm: Send interrupts on PMU counter overflow

Quoted 2 lines · Aaron Lindsay

Setup a QEMUTimer to get a callback when we expect counters to next overflow and trigger an interrupt at that time.

Peter,

It looks like there's probably going to be at least a v8 in this series since you've made a few comments which require changes. But I don't think this final patch has ever received any review comments from anyone, and I suspect it's not because it's perfect...

Would you mind taking a look at this one during your review if you can find time?

Thanks!

-Aaron

#25 lore raw

Re: [Qemu-arm] [PATCH v7 12/12] target/arm: Send interrupts on PMU counter overflow

Quoted 6 lines · Aaron Lindsay
Quoted 2 lines · Aaron Lindsay

Setup a QEMUTimer to get a callback when we expect counters to next overflow and trigger an interrupt at that time.

Peter,

Quoted 7 lines

It looks like there's probably going to be at least a v8 in this series since you've made a few comments which require changes. But I don't think this final patch has ever received any review comments from anyone, and I suspect it's not because it's perfect...

Would you mind taking a look at this one during your review if you can find time?

I think I'd rather let Richard review this one...

thanks
-- PMM

#26 lore raw
In reply to Aaron Lindsay
This series failed docker-quick@centos7 build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.

Hi,

This series failed docker-quick@centos7 build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.

Type: series
Message-id: [email protected]
Subject: [Qemu-devel] [PATCH v7 00/12] More fully implement ARM PMUv3

=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-quick@centos7 SHOW_ENV=1 J=8 === TEST SCRIPT END ===

Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
Switched to a new branch 'test'
5d7e95a226 target/arm: Send interrupts on PMU counter overflow 7c803f850e target/arm: Implement PMSWINC
0b85f12afc target/arm: PMU: Set PMCR.N to 4
9723933103 target/arm: PMU: Add instruction and cycle events db26e0c7bf target/arm: Finish implementation of PM[X]EVCNTR and PM[X]EVTYPER 1a1b5fa486 target/arm: Add array for supported PMU events, generate PMCEID[01] e19bb543b8 target/arm: Implement PMOVSSET
07b7bf48b1 target/arm: Allow AArch32 access for PMCCFILTR 8eefc04a65 target/arm: Filter cycle counter based on PMCCFILTR_EL0 5a3876bb4d target/arm: Swap PMU values before/after migrations cfba1f5577 target/arm: Reorganize PMCCNTR accesses
9803bffbee migration: Add post_save function to VMStateDescription

=== OUTPUT BEGIN ===
BUILD centos7
make[1]: Entering directory '/var/tmp/patchew-tester-tmp-_16qprbf/src'
GEN /var/tmp/patchew-tester-tmp-_16qprbf/src/docker-src.2018-11-06-03.47.10.29427/qemu.tar
Cloning into '/var/tmp/patchew-tester-tmp-_16qprbf/src/docker-src.2018-11-06-03.47.10.29427/qemu.tar.vroot'... done.

Checking out files:  45% (2954/6453)   
Checking out files:  46% (2969/6453)   
Checking out files:  47% (3033/6453)   
Checking out files:  48% (3098/6453)   
Checking out files:  49% (3162/6453)   
Checking out files:  50% (3227/6453)   
Checking out files:  51% (3292/6453)   
Checking out files:  52% (3356/6453)   
Checking out files:  53% (3421/6453)   
Checking out files:  54% (3485/6453)   
Checking out files:  55% (3550/6453)   
Checking out files:  56% (3614/6453)   
Checking out files:  57% (3679/6453)   
Checking out files:  58% (3743/6453)   
Checking out files:  59% (3808/6453)   
Checking out files:  60% (3872/6453)   
Checking out files:  61% (3937/6453)   
Checking out files:  62% (4001/6453)   
Checking out files:  63% (4066/6453)   
Checking out files:  64% (4130/6453)   
Checking out files:  65% (4195/6453)   
Checking out files:  66% (4259/6453)   
Checking out files:  67% (4324/6453)   
Checking out files:  68% (4389/6453)   
Checking out files:  69% (4453/6453)   
Checking out files:  70% (4518/6453)   
Checking out files:  71% (4582/6453)   
Checking out files:  72% (4647/6453)   
Checking out files:  73% (4711/6453)   
Checking out files:  74% (4776/6453)   
Checking out files:  75% (4840/6453)   
Checking out files:  76% (4905/6453)   
Checking out files:  77% (4969/6453)   
Checking out files:  78% (5034/6453)   
Checking out files:  79% (5098/6453)   
Checking out files:  80% (5163/6453)   
Checking out files:  81% (5227/6453)   
Checking out files:  82% (5292/6453)   
Checking out files:  83% (5356/6453)   
Checking out files:  84% (5421/6453)   
Checking out files:  85% (5486/6453)   
Checking out files:  86% (5550/6453)   
Checking out files:  87% (5615/6453)   
Checking out files:  88% (5679/6453)   
Checking out files:  89% (5744/6453)   
Checking out files:  90% (5808/6453)   
Checking out files:  91% (5873/6453)   
Checking out files:  92% (5937/6453)   
Checking out files:  93% (6002/6453)   
Checking out files:  94% (6066/6453)   
Checking out files:  95% (6131/6453)   
Checking out files:  96% (6195/6453)   
Checking out files:  97% (6260/6453)   
Checking out files:  98% (6324/6453)   
Checking out files:  99% (6389/6453)   
Checking out files: 100% (6453/6453)   
Checking out files: 100% (6453/6453), done.

Your branch is up-to-date with 'origin/test'.
Submodule 'dtc' (git://git.qemu-project.org/dtc.git) registered for path 'dtc'
Cloning into '/var/tmp/patchew-tester-tmp-_16qprbf/src/docker-src.2018-11-06-03.47.10.29427/qemu.tar.vroot/dtc'... Submodule path 'dtc': checked out '88f18909db731a627456f26d779445f84e449536'
Submodule 'ui/keycodemapdb' (git://git.qemu.org/keycodemapdb.git) registered for path 'ui/keycodemapdb' Cloning into '/var/tmp/patchew-tester-tmp-_16qprbf/src/docker-src.2018-11-06-03.47.10.29427/qemu.tar.vroot/ui/keycodemapdb'... Submodule path 'ui/keycodemapdb': checked out '6b3d716e2b6472eb7189d3220552280ef3d832ce'
COPY RUNNER
RUN test-quick in qemu:centos7
Packages installed:
SDL-devel-1.2.15-14.el7.x86_64
bison-3.0.4-1.el7.x86_64
bzip2-1.0.6-13.el7.x86_64
bzip2-devel-1.0.6-13.el7.x86_64
ccache-3.3.4-1.el7.x86_64
csnappy-devel-0-6.20150729gitd7bc683.el7.x86_64
flex-2.5.37-3.el7.x86_64
gcc-4.8.5-28.el7_5.1.x86_64
gettext-0.19.8.1-2.el7.x86_64
git-1.8.3.1-14.el7_5.x86_64
glib2-devel-2.54.2-2.el7.x86_64
libaio-devel-0.3.109-13.el7.x86_64
libepoxy-devel-1.3.1-2.el7_5.x86_64
libfdt-devel-1.4.6-1.el7.x86_64
lzo-devel-2.06-8.el7.x86_64
make-3.82-23.el7.x86_64
mesa-libEGL-devel-17.2.3-8.20171019.el7.x86_64
mesa-libgbm-devel-17.2.3-8.20171019.el7.x86_64
nettle-devel-2.7.1-8.el7.x86_64
package g++ is not installed
package librdmacm-devel is not installed
pixman-devel-0.34.0-1.el7.x86_64
spice-glib-devel-0.34-3.el7_5.1.x86_64
spice-server-devel-0.14.0-2.el7_5.4.x86_64
tar-1.26-34.el7.x86_64
vte-devel-0.28.2-10.el7.x86_64
xen-devel-4.6.6-12.el7.x86_64
zlib-devel-1.2.7-17.el7.x86_64

Environment variables:
PACKAGES=bison bzip2 bzip2-devel ccache csnappy-devel flex g++ gcc gettext git glib2-devel libaio-devel libepoxy-devel libfdt-devel librdmacm-devel lzo-devel make mesa-libEGL-devel mesa-libgbm-devel nettle-devel pixman-devel SDL-devel spice-glib-devel spice-server-devel tar vte-devel xen-devel zlib-devel
HOSTNAME=037a46f30911
MAKEFLAGS= -j8
J=8
CCACHE_DIR=/var/tmp/ccache
EXTRA_CONFIGURE_OPTS=
V=
SHOW_ENV=1 PATH=/usr/lib/ccache:/usr/lib64/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin PWD=/
TARGET_LIST=
SHLVL=1
HOME=/home/patchew
TEST_DIR=/tmp/qemu-test
FEATURES= dtc
DEBUG=
_=/usr/bin/env

Configure options:
--enable-werror --target-list=x86_64-softmmu,aarch64-softmmu --prefix=/tmp/qemu-test/install No C++ compiler available; disabling C++ specific optional code

Install prefix    /tmp/qemu-test/install
BIOS directory    /tmp/qemu-test/install/share/qemu
firmware path     /tmp/qemu-test/install/share/qemu-firmware
binary directory  /tmp/qemu-test/install/bin

library directory /tmp/qemu-test/install/lib module directory /tmp/qemu-test/install/lib/qemu libexec directory /tmp/qemu-test/install/libexec include directory /tmp/qemu-test/install/include config directory /tmp/qemu-test/install/etc
local state directory /tmp/qemu-test/install/var
Manual directory /tmp/qemu-test/install/share/man ELF interp prefix /usr/gnemul/qemu-%M
Source path /tmp/qemu-test/src
GIT binary git
GIT submodules
C compiler cc
Host C compiler cc
C++ compiler
Objective-C compiler cc

ARFLAGS           rv
CFLAGS            -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -g 
QEMU_CFLAGS       -I/usr/include/pixman-1    -Werror   -pthread -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include   -fPIE -DPIE -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv  -Wendif-labels -Wno-missing-include-dirs -Wempty-body -Wnested-externs -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wold-style-declaration -Wold-style-definition -Wtype-limits -fstack-protector-strong -Wno-missing-braces   -I/usr/include/libpng15     -pthread -I/usr/include/spice-server -I/usr/include/cacard -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/nss3 -I/usr/include/nspr4 -I/usr/include/spice-1  
LDFLAGS           -Wl,--warn-common -Wl,-z,relro -Wl,-z,now -pie -m64 -g 
QEMU_LDFLAGS       
make              make
install           install
python            python -B
smbd              /usr/sbin/smbd
module support    no
host CPU          x86_64
host big endian   no
target list       x86_64-softmmu aarch64-softmmu
gprof enabled     no
sparse enabled    no
strip binaries    yes
profiler          no
static build      no
SDL support       yes (1.2.15)
GTK support       no 
GTK GL support    no
VTE support       no 
TLS priority      NORMAL
GNUTLS support    no
libgcrypt         no
nettle            yes (2.7.1)
libtasn1          no
curses support    yes
virgl support     no 
curl support      no
mingw32 support   no
Audio drivers     oss

Block whitelist (rw)
Block whitelist (ro)
VirtFS support no
Multipath support no

VNC support       yes
VNC SASL support  no
VNC JPEG support  no
VNC PNG support   yes
xen support       yes
xen ctrl version  40600
pv dom build      no
brlapi support    no
bluez  support    no
Documentation     no
PIE               yes
vde support       no
netmap support    no
Linux AIO support yes
ATTR/XATTR support yes
Install blobs     yes
KVM support       yes
HAX support       no
HVF support       no
WHPX support      no
TCG support       yes
TCG debug enabled no
TCG interpreter   no
malloc trim support yes
RDMA support      yes
PVRDMA support    yes
fdt support       system
membarrier        no
preadv support    yes
fdatasync         yes
madvise           yes
posix_madvise     yes
posix_memalign    yes

libcap-ng support no
vhost-net support yes
vhost-crypto support yes
vhost-scsi support yes
vhost-vsock support yes
vhost-user support yes

Trace backends    log
spice support     yes (0.12.13/0.14.0)
rbd support       no
xfsctl support    no
smartcard support yes
libusb            no
usb net redir     no
OpenGL support    yes
OpenGL dmabufs    yes
libiscsi support  no
libnfs support    no

build guest agent yes
QGA VSS support no
QGA w32 disk info no
QGA MSI support no
seccomp support no
coroutine backend ucontext
coroutine pool yes
debug stack usage no
mutex debugging no
crypto afalg no
GlusterFS support no

gcov              gcov
gcov enabled      no
TPM support       yes
libssh2 support   no
TPM passthrough   yes
TPM emulator      yes
QOM debugging     yes
Live block migration yes
lzo support       yes
snappy support    no
bzip2 support     yes
NUMA host support no
libxml2           no
tcmalloc support  no
jemalloc support  no
avx2 optimization yes
replication support yes
VxHS block device no
capstone          no
docker            no
libpmem support   no
libudev           no

WARNING: Use of SDL 1.2 is deprecated and will be removed in
WARNING: future releases. Please switch to using SDL 2.0

NOTE: cross-compilers enabled: 'cc'

  GEN     x86_64-softmmu/config-devices.mak.tmp
  GEN     aarch64-softmmu/config-devices.mak.tmp
  GEN     config-host.h
  GEN     qemu-options.def
  GEN     trace/generated-tcg-tracers.h
  GEN     qapi-gen
  GEN     trace/generated-helpers-wrappers.h
  GEN     trace/generated-helpers.h
  GEN     trace/generated-helpers.c
  GEN     module_block.h
  GEN     aarch64-softmmu/config-devices.mak
  GEN     ui/input-keymap-atset1-to-qcode.c
  GEN     ui/input-keymap-linux-to-qcode.c
  GEN     x86_64-softmmu/config-devices.mak
  GEN     ui/input-keymap-qcode-to-atset1.c
  GEN     ui/input-keymap-qcode-to-atset2.c
  GEN     ui/input-keymap-qcode-to-atset3.c
  GEN     ui/input-keymap-qcode-to-linux.c
  GEN     ui/input-keymap-qcode-to-qnum.c
  GEN     ui/input-keymap-qcode-to-sun.c
  GEN     ui/input-keymap-qnum-to-qcode.c
  GEN     ui/input-keymap-usb-to-qcode.c
  GEN     ui/input-keymap-win32-to-qcode.c
  GEN     ui/input-keymap-xorgevdev-to-qcode.c
  GEN     ui/input-keymap-x11-to-qcode.c
  GEN     ui/input-keymap-xorgkbd-to-qcode.c
  GEN     ui/input-keymap-xorgxquartz-to-qcode.c
  GEN     ui/input-keymap-xorgxwin-to-qcode.c
  GEN     ui/input-keymap-osx-to-qcode.c
  GEN     tests/test-qapi-gen
  GEN     trace-root.h
  GEN     accel/kvm/trace.h
  GEN     accel/tcg/trace.h
  GEN     audio/trace.h
  GEN     block/trace.h
  GEN     chardev/trace.h
  GEN     crypto/trace.h
  GEN     hw/9pfs/trace.h
  GEN     hw/acpi/trace.h
  GEN     hw/alpha/trace.h
  GEN     hw/arm/trace.h
  GEN     hw/audio/trace.h
  GEN     hw/block/trace.h
  GEN     hw/block/dataplane/trace.h
  GEN     hw/char/trace.h
  GEN     hw/display/trace.h
  GEN     hw/dma/trace.h
  GEN     hw/hppa/trace.h
  GEN     hw/i2c/trace.h
  GEN     hw/i386/trace.h
  GEN     hw/i386/xen/trace.h
  GEN     hw/ide/trace.h
  GEN     hw/input/trace.h
  GEN     hw/intc/trace.h
  GEN     hw/isa/trace.h
  GEN     hw/mem/trace.h
  GEN     hw/misc/trace.h
  GEN     hw/misc/macio/trace.h
  GEN     hw/net/trace.h
  GEN     hw/nvram/trace.h
  GEN     hw/pci/trace.h
  GEN     hw/pci-host/trace.h
  GEN     hw/ppc/trace.h
  GEN     hw/rdma/trace.h
  GEN     hw/rdma/vmw/trace.h
  GEN     hw/s390x/trace.h
  GEN     hw/scsi/trace.h
  GEN     hw/sd/trace.h
  GEN     hw/sparc/trace.h
  GEN     hw/sparc64/trace.h
  GEN     hw/timer/trace.h
  GEN     hw/tpm/trace.h
  GEN     hw/usb/trace.h
  GEN     hw/vfio/trace.h
  GEN     hw/virtio/trace.h
  GEN     hw/watchdog/trace.h
  GEN     hw/xen/trace.h
  GEN     io/trace.h
  GEN     linux-user/trace.h
  GEN     migration/trace.h
  GEN     nbd/trace.h
  GEN     net/trace.h
  GEN     qapi/trace.h
  GEN     qom/trace.h
  GEN     scsi/trace.h
  GEN     target/arm/trace.h
  GEN     target/i386/trace.h
  GEN     target/mips/trace.h
  GEN     target/ppc/trace.h
  GEN     target/s390x/trace.h
  GEN     target/sparc/trace.h
  GEN     ui/trace.h
  GEN     util/trace.h
  GEN     trace-root.c
  GEN     accel/kvm/trace.c
  GEN     accel/tcg/trace.c
  GEN     audio/trace.c
  GEN     block/trace.c
  GEN     chardev/trace.c
  GEN     crypto/trace.c
  GEN     hw/9pfs/trace.c
  GEN     hw/acpi/trace.c
  GEN     hw/alpha/trace.c
  GEN     hw/arm/trace.c
  GEN     hw/audio/trace.c
  GEN     hw/block/trace.c
  GEN     hw/block/dataplane/trace.c
  GEN     hw/char/trace.c
  GEN     hw/display/trace.c
  GEN     hw/dma/trace.c
  GEN     hw/hppa/trace.c
  GEN     hw/i2c/trace.c
  GEN     hw/i386/trace.c
  GEN     hw/i386/xen/trace.c
  GEN     hw/ide/trace.c
  GEN     hw/input/trace.c
  GEN     hw/intc/trace.c
  GEN     hw/isa/trace.c
  GEN     hw/mem/trace.c
  GEN     hw/misc/trace.c
  GEN     hw/misc/macio/trace.c
  GEN     hw/net/trace.c
  GEN     hw/nvram/trace.c
  GEN     hw/pci/trace.c
  GEN     hw/pci-host/trace.c
  GEN     hw/ppc/trace.c
  GEN     hw/rdma/trace.c
  GEN     hw/rdma/vmw/trace.c
  GEN     hw/s390x/trace.c
  GEN     hw/scsi/trace.c
  GEN     hw/sd/trace.c
  GEN     hw/sparc/trace.c
  GEN     hw/sparc64/trace.c
  GEN     hw/timer/trace.c
  GEN     hw/tpm/trace.c
  GEN     hw/usb/trace.c
  GEN     hw/vfio/trace.c
  GEN     hw/virtio/trace.c
  GEN     hw/watchdog/trace.c
  GEN     hw/xen/trace.c
  GEN     io/trace.c
  GEN     linux-user/trace.c
  GEN     migration/trace.c
  GEN     nbd/trace.c
  GEN     net/trace.c
  GEN     qapi/trace.c
  GEN     qom/trace.c
  GEN     scsi/trace.c
  GEN     target/arm/trace.c
  GEN     target/i386/trace.c
  GEN     target/mips/trace.c
  GEN     target/ppc/trace.c
  GEN     target/s390x/trace.c
  GEN     target/sparc/trace.c
  GEN     ui/trace.c
  GEN     util/trace.c
  GEN     config-all-devices.mak
  CC      tests/qemu-iotests/socket_scm_helper.o
  CC      qapi/qapi-builtin-types.o
  CC      qapi/qapi-types.o
  CC      qapi/qapi-types-block-core.o
  CC      qapi/qapi-types-char.o
  CC      qapi/qapi-types-block.o
  GEN     qga/qapi-generated/qapi-gen
  CC      qapi/qapi-types-common.o
  CC      qapi/qapi-types-crypto.o
  CC      qapi/qapi-types-introspect.o
  CC      qapi/qapi-types-job.o
  CC      qapi/qapi-types-migration.o
  CC      qapi/qapi-types-misc.o
  CC      qapi/qapi-types-net.o
  CC      qapi/qapi-types-rocker.o
  CC      qapi/qapi-types-run-state.o
  CC      qapi/qapi-types-sockets.o
  CC      qapi/qapi-types-tpm.o
  CC      qapi/qapi-types-trace.o
  CC      qapi/qapi-types-transaction.o
  CC      qapi/qapi-types-ui.o
  CC      qapi/qapi-builtin-visit.o
  CC      qapi/qapi-visit.o
  CC      qapi/qapi-visit-block-core.o
  CC      qapi/qapi-visit-block.o
  CC      qapi/qapi-visit-char.o
  CC      qapi/qapi-visit-common.o
  CC      qapi/qapi-visit-crypto.o
  CC      qapi/qapi-visit-introspect.o
  CC      qapi/qapi-visit-job.o
  CC      qapi/qapi-visit-migration.o
  CC      qapi/qapi-visit-misc.o
  CC      qapi/qapi-visit-net.o
  CC      qapi/qapi-visit-rocker.o
  CC      qapi/qapi-visit-run-state.o
  CC      qapi/qapi-visit-sockets.o
  CC      qapi/qapi-visit-tpm.o
  CC      qapi/qapi-visit-trace.o
  CC      qapi/qapi-visit-transaction.o
  CC      qapi/qapi-visit-ui.o
  CC      qapi/qapi-events.o
  CC      qapi/qapi-events-block-core.o
  CC      qapi/qapi-events-block.o
  CC      qapi/qapi-events-char.o
  CC      qapi/qapi-events-common.o
  CC      qapi/qapi-events-crypto.o
  CC      qapi/qapi-events-introspect.o
  CC      qapi/qapi-events-job.o
  CC      qapi/qapi-events-migration.o
  CC      qapi/qapi-events-misc.o
  CC      qapi/qapi-events-net.o
  CC      qapi/qapi-events-rocker.o
  CC      qapi/qapi-events-run-state.o
  CC      qapi/qapi-events-sockets.o
  CC      qapi/qapi-events-tpm.o
  CC      qapi/qapi-events-trace.o
  CC      qapi/qapi-events-transaction.o
  CC      qapi/qapi-events-ui.o
  CC      qapi/qapi-introspect.o
  CC      qapi/qapi-visit-core.o
  CC      qapi/qapi-dealloc-visitor.o
  CC      qapi/qobject-input-visitor.o
  CC      qapi/qobject-output-visitor.o
  CC      qapi/qmp-registry.o
  CC      qapi/qmp-dispatch.o
  CC      qapi/string-input-visitor.o
  CC      qapi/string-output-visitor.o
  CC      qapi/opts-visitor.o
  CC      qapi/qapi-clone-visitor.o
  CC      qapi/qmp-event.o
  CC      qapi/qapi-util.o
  CC      qobject/qnull.o
  CC      qobject/qnum.o
  CC      qobject/qstring.o
  CC      qobject/qdict.o
  CC      qobject/qlist.o
  CC      qobject/qbool.o
  CC      qobject/qlit.o
  CC      qobject/qjson.o
  CC      qobject/qobject.o
  CC      qobject/json-lexer.o
  CC      qobject/json-streamer.o
  CC      qobject/json-parser.o
  CC      qobject/block-qdict.o
  CC      trace/control.o
  CC      trace/qmp.o
  CC      util/osdep.o
  CC      util/cutils.o
  CC      util/unicode.o
  CC      util/qemu-timer-common.o
  CC      util/bufferiszero.o
  CC      util/lockcnt.o
  CC      util/aiocb.o
  CC      util/async.o
  CC      util/aio-wait.o
  CC      util/thread-pool.o
  CC      util/qemu-timer.o
  CC      util/main-loop.o
  CC      util/iohandler.o
  CC      util/aio-posix.o
  CC      util/compatfd.o
  CC      util/event_notifier-posix.o
  CC      util/mmap-alloc.o
  CC      util/oslib-posix.o
  CC      util/qemu-openpty.o
  CC      util/qemu-thread-posix.o
  CC      util/memfd.o
  CC      util/envlist.o
  CC      util/path.o
  CC      util/host-utils.o
  CC      util/module.o
  CC      util/bitmap.o
  CC      util/hbitmap.o
  CC      util/bitops.o
  CC      util/fifo8.o
  CC      util/acl.o
  CC      util/cacheinfo.o
  CC      util/error.o
  CC      util/id.o
  CC      util/qemu-error.o
  CC      util/iov.o
  CC      util/qemu-config.o
  CC      util/qemu-sockets.o
  CC      util/uri.o
  CC      util/notify.o
  CC      util/qemu-option.o
  CC      util/qemu-progress.o
  CC      util/keyval.o
  CC      util/hexdump.o
  CC      util/uuid.o
  CC      util/crc32c.o
  CC      util/getauxval.o
  CC      util/throttle.o
  CC      util/readline.o
  CC      util/rcu.o
  CC      util/qemu-coroutine.o
  CC      util/qemu-coroutine-lock.o
  CC      util/qemu-coroutine-io.o
  CC      util/qemu-coroutine-sleep.o
  CC      util/coroutine-ucontext.o
  CC      util/buffer.o
  CC      util/timed-average.o
  CC      util/base64.o
  CC      util/log.o
  CC      util/pagesize.o
  CC      util/qdist.o
  CC      util/qht.o
  CC      util/qsp.o
  CC      util/range.o
  CC      util/stats64.o
  CC      util/systemd.o
  CC      util/iova-tree.o
  CC      util/vfio-helpers.o
  CC      util/drm.o
  CC      trace-root.o
  CC      accel/kvm/trace.o
  CC      audio/trace.o
  CC      accel/tcg/trace.o
  CC      block/trace.o
  CC      chardev/trace.o
  CC      crypto/trace.o
  CC      hw/9pfs/trace.o
  CC      hw/acpi/trace.o
  CC      hw/alpha/trace.o
  CC      hw/arm/trace.o
  CC      hw/audio/trace.o
  CC      hw/block/trace.o
  CC      hw/block/dataplane/trace.o
  CC      hw/char/trace.o
  CC      hw/display/trace.o
  CC      hw/dma/trace.o
  CC      hw/hppa/trace.o
  CC      hw/i2c/trace.o
  CC      hw/i386/trace.o
  CC      hw/i386/xen/trace.o
  CC      hw/ide/trace.o
  CC      hw/input/trace.o
  CC      hw/intc/trace.o
  CC      hw/isa/trace.o
  CC      hw/mem/trace.o
  CC      hw/misc/trace.o
  CC      hw/misc/macio/trace.o
  CC      hw/net/trace.o
  CC      hw/nvram/trace.o
  CC      hw/pci/trace.o
  CC      hw/pci-host/trace.o
  CC      hw/ppc/trace.o
  CC      hw/rdma/trace.o
  CC      hw/rdma/vmw/trace.o
  CC      hw/s390x/trace.o
  CC      hw/scsi/trace.o
  CC      hw/sd/trace.o
  CC      hw/sparc/trace.o
  CC      hw/sparc64/trace.o
  CC      hw/timer/trace.o
  CC      hw/usb/trace.o
  CC      hw/tpm/trace.o
  CC      hw/vfio/trace.o
  CC      hw/virtio/trace.o
  CC      hw/watchdog/trace.o
  CC      hw/xen/trace.o
  CC      io/trace.o
  CC      linux-user/trace.o
  CC      migration/trace.o
  CC      nbd/trace.o
  CC      net/trace.o
  CC      qapi/trace.o
  CC      qom/trace.o
  CC      scsi/trace.o
  CC      target/arm/trace.o
  CC      target/i386/trace.o
  CC      target/mips/trace.o
  CC      target/ppc/trace.o
  CC      target/s390x/trace.o
  CC      target/sparc/trace.o
  CC      ui/trace.o
  CC      util/trace.o
  CC      crypto/pbkdf-stub.o
  CC      stubs/arch-query-cpu-def.o
  CC      stubs/arch-query-cpu-model-expansion.o
  CC      stubs/arch-query-cpu-model-comparison.o
  CC      stubs/arch-query-cpu-model-baseline.o
  CC      stubs/bdrv-next-monitor-owned.o
  CC      stubs/blk-commit-all.o
  CC      stubs/blockdev-close-all-bdrv-states.o
  CC      stubs/clock-warp.o
  CC      stubs/cpu-get-clock.o
  CC      stubs/cpu-get-icount.o
  CC      stubs/dump.o
  CC      stubs/error-printf.o
  CC      stubs/gdbstub.o
  CC      stubs/fdset.o
  CC      stubs/get-vm-name.o
  CC      stubs/iothread.o
  CC      stubs/iothread-lock.o
  CC      stubs/is-daemonized.o
  CC      stubs/linux-aio.o
  CC      stubs/machine-init-done.o
  CC      stubs/migr-blocker.o
  CC      stubs/change-state-handler.o
  CC      stubs/monitor.o
  CC      stubs/notify-event.o
  CC      stubs/qtest.o
  CC      stubs/replay.o
  CC      stubs/runstate-check.o
  CC      stubs/set-fd-handler.o
  CC      stubs/slirp.o
  CC      stubs/sysbus.o
  CC      stubs/tpm.o
  CC      stubs/trace-control.o
  CC      stubs/uuid.o
  CC      stubs/vm-stop.o
  CC      stubs/vmstate.o
  CC      stubs/qmp_memory_device.o
  CC      stubs/target-monitor-defs.o
  CC      stubs/target-get-monitor-def.o
  CC      stubs/pc_madt_cpu_entry.o
  CC      stubs/vmgenid.o
  CC      stubs/xen-common.o
  CC      stubs/xen-hvm.o
  CC      stubs/pci-host-piix.o
  CC      stubs/ram-block.o
  CC      stubs/ramfb.o
  CC      contrib/ivshmem-client/ivshmem-client.o
  CC      contrib/ivshmem-client/main.o
  CC      contrib/ivshmem-server/ivshmem-server.o
  CC      contrib/ivshmem-server/main.o
  CC      qemu-nbd.o
  CC      block.o
  CC      blockjob.o
  CC      job.o
  CC      qemu-io-cmds.o
  CC      replication.o
  CC      block/raw-format.o
  CC      block/qcow.o
  CC      block/vdi.o
  CC      block/vmdk.o
  CC      block/cloop.o
  CC      block/bochs.o
  CC      block/vpc.o
  CC      block/vvfat.o
  CC      block/dmg.o
  CC      block/qcow2.o
  CC      block/qcow2-refcount.o
  CC      block/qcow2-cluster.o
  CC      block/qcow2-snapshot.o
  CC      block/qcow2-cache.o
  CC      block/qcow2-bitmap.o
  CC      block/qed.o
  CC      block/qed-l2-cache.o
  CC      block/qed-table.o
  CC      block/qed-cluster.o
  CC      block/qed-check.o
  CC      block/vhdx.o
  CC      block/vhdx-endian.o
  CC      block/vhdx-log.o
  CC      block/quorum.o
  CC      block/parallels.o
  CC      block/blkdebug.o
  CC      block/blkverify.o
  CC      block/blkreplay.o
  CC      block/blklogwrites.o
  CC      block/block-backend.o
  CC      block/snapshot.o
  CC      block/qapi.o
  CC      block/file-posix.o
  CC      block/linux-aio.o
  CC      block/null.o
  CC      block/mirror.o
  CC      block/commit.o
  CC      block/io.o
  CC      block/create.o
  CC      block/throttle-groups.o
  CC      block/nvme.o
  CC      block/nbd.o
  CC      block/nbd-client.o
  CC      block/sheepdog.o
  CC      block/accounting.o
  CC      block/dirty-bitmap.o
  CC      block/write-threshold.o
  CC      block/backup.o
  CC      block/replication.o
  CC      block/throttle.o
  CC      block/copy-on-read.o
  CC      block/crypto.o
  CC      nbd/server.o
  CC      nbd/client.o
  CC      nbd/common.o
  CC      scsi/utils.o
  CC      scsi/pr-manager.o
  CC      scsi/pr-manager-helper.o
  CC      block/dmg-bz2.o
  CC      crypto/init.o
  CC      crypto/hash.o
  CC      crypto/hash-nettle.o
  CC      crypto/hmac.o
  CC      crypto/hmac-nettle.o
  CC      crypto/aes.o
  CC      crypto/desrfb.o
  CC      crypto/cipher.o
  CC      crypto/tlscreds.o
  CC      crypto/tlscredsanon.o
  CC      crypto/tlscredspsk.o
  CC      crypto/tlscredsx509.o
  CC      crypto/tlssession.o
  CC      crypto/secret.o
  CC      crypto/pbkdf.o
  CC      crypto/random-platform.o
  CC      crypto/pbkdf-nettle.o
  CC      crypto/ivgen.o
  CC      crypto/ivgen-essiv.o
  CC      crypto/ivgen-plain.o
  CC      crypto/ivgen-plain64.o
  CC      crypto/afsplit.o
  CC      crypto/xts.o
  CC      crypto/block.o
  CC      crypto/block-qcow.o
  CC      crypto/block-luks.o
  CC      io/channel-buffer.o
  CC      io/channel.o
  CC      io/channel-command.o
  CC      io/channel-file.o
  CC      io/channel-socket.o
  CC      io/channel-tls.o
  CC      io/channel-watch.o
  CC      io/channel-websock.o
  CC      io/channel-util.o
  CC      io/net-listener.o
  CC      io/dns-resolver.o
  CC      io/task.o
  CC      qom/object.o
  CC      qom/container.o
  CC      qom/qom-qobject.o
  CC      qom/object_interfaces.o
  GEN     qemu-img-cmds.h
  CC      qemu-io.o
  CC      qemu-edid.o
  CC      hw/display/edid-generate.o
  CC      scsi/qemu-pr-helper.o
  CC      qemu-bridge-helper.o
  CC      blockdev.o
  CC      blockdev-nbd.o
  CC      bootdevice.o
  CC      iothread.o
  CC      job-qmp.o
  CC      qdev-monitor.o
  CC      device-hotplug.o
  CC      os-posix.o
  CC      bt-host.o
  CC      bt-vhci.o
  CC      dma-helpers.o
  CC      vl.o
  CC      tpm.o
  CC      device_tree.o
  CC      qapi/qapi-commands.o
  CC      qapi/qapi-commands-block-core.o
  CC      qapi/qapi-commands-block.o
  CC      qapi/qapi-commands-char.o
  CC      qapi/qapi-commands-common.o
  CC      qapi/qapi-commands-crypto.o
  CC      qapi/qapi-commands-introspect.o
  CC      qapi/qapi-commands-job.o
  CC      qapi/qapi-commands-migration.o
  CC      qapi/qapi-commands-misc.o
  CC      qapi/qapi-commands-net.o
  CC      qapi/qapi-commands-rocker.o
  CC      qapi/qapi-commands-run-state.o
  CC      qapi/qapi-commands-tpm.o
  CC      qapi/qapi-commands-sockets.o
  CC      qapi/qapi-commands-trace.o
  CC      qapi/qapi-commands-transaction.o
  CC      qapi/qapi-commands-ui.o
  CC      qmp.o
  CC      hmp.o
  CC      cpus-common.o
  CC      audio/audio.o
  CC      audio/noaudio.o
  CC      audio/wavaudio.o
  CC      audio/mixeng.o
  CC      audio/spiceaudio.o
  CC      audio/wavcapture.o
  CC      backends/rng.o
  CC      backends/rng-egd.o
  CC      backends/rng-random.o
  CC      backends/tpm.o
  CC      backends/hostmem.o
  CC      backends/hostmem-ram.o
  CC      backends/hostmem-file.o
  CC      backends/cryptodev.o
  CC      backends/cryptodev-builtin.o
  CC      backends/cryptodev-vhost.o
  CC      backends/cryptodev-vhost-user.o
  CC      backends/hostmem-memfd.o
  CC      block/stream.o
  CC      chardev/msmouse.o
  CC      chardev/wctablet.o
  CC      chardev/testdev.o
  CC      chardev/spice.o
  CC      disas/arm.o
  CC      disas/i386.o
  CC      fsdev/qemu-fsdev-dummy.o
  CC      fsdev/qemu-fsdev-opts.o
  CC      fsdev/qemu-fsdev-throttle.o
  CC      hw/acpi/core.o
  CC      hw/acpi/piix4.o
  CC      hw/acpi/pcihp.o
  CC      hw/acpi/ich9.o
  CC      hw/acpi/tco.o
  CC      hw/acpi/cpu_hotplug.o
  CC      hw/acpi/memory_hotplug.o
  CC      hw/acpi/cpu.o
  CC      hw/acpi/nvdimm.o
  CC      hw/acpi/vmgenid.o
  CC      hw/acpi/acpi_interface.o
  CC      hw/acpi/bios-linker-loader.o
  CC      hw/acpi/aml-build.o
  CC      hw/acpi/ipmi.o
  CC      hw/acpi/acpi-stub.o
  CC      hw/acpi/ipmi-stub.o
  CC      hw/audio/sb16.o
  CC      hw/audio/es1370.o
  CC      hw/audio/ac97.o
  CC      hw/audio/fmopl.o
  CC      hw/audio/adlib.o
  CC      hw/audio/gus.o
  CC      hw/audio/gusemu_hal.o
  CC      hw/audio/gusemu_mixer.o
  CC      hw/audio/cs4231a.o
  CC      hw/audio/intel-hda.o
  CC      hw/audio/hda-codec.o
  CC      hw/audio/pcspk.o
  CC      hw/audio/wm8750.o
  CC      hw/audio/pl041.o
  CC      hw/audio/lm4549.o
  CC      hw/audio/marvell_88w8618.o
  CC      hw/audio/soundhw.o
  CC      hw/block/block.o
  CC      hw/block/cdrom.o
  CC      hw/block/hd-geometry.o
  CC      hw/block/fdc.o
  CC      hw/block/m25p80.o
  CC      hw/block/nand.o
  CC      hw/block/pflash_cfi01.o
  CC      hw/block/pflash_cfi02.o
  CC      hw/block/xen_disk.o
  CC      hw/block/ecc.o
  CC      hw/block/onenand.o
  CC      hw/block/nvme.o
  CC      hw/bt/core.o
  CC      hw/bt/l2cap.o
  CC      hw/bt/sdp.o
  CC      hw/bt/hci.o
  CC      hw/bt/hid.o
  CC      hw/bt/hci-csr.o
  CC      hw/char/ipoctal232.o
  CC      hw/char/nrf51_uart.o
  CC      hw/char/parallel.o
  CC      hw/char/parallel-isa.o
  CC      hw/char/pl011.o
  CC      hw/char/serial.o
  CC      hw/char/serial-isa.o
  CC      hw/char/serial-pci.o
  CC      hw/char/virtio-console.o
  CC      hw/char/xen_console.o
  CC      hw/char/cadence_uart.o
  CC      hw/char/cmsdk-apb-uart.o
  CC      hw/char/debugcon.o
  CC      hw/char/imx_serial.o
  CC      hw/core/qdev.o
  CC      hw/core/qdev-properties.o
  CC      hw/core/bus.o
  CC      hw/core/reset.o
  CC      hw/core/qdev-fw.o
  CC      hw/core/fw-path-provider.o
  CC      hw/core/irq.o
  CC      hw/core/hotplug.o
  CC      hw/core/nmi.o
  CC      hw/core/stream.o
  CC      hw/core/ptimer.o
  CC      hw/core/sysbus.o
  CC      hw/core/machine.o
  CC      hw/core/loader.o
  CC      hw/core/qdev-properties-system.o
  CC      hw/core/register.o
  CC      hw/core/or-irq.o
  CC      hw/core/split-irq.o
  CC      hw/core/platform-bus.o
  CC      hw/core/generic-loader.o
  CC      hw/core/null-machine.o
  CC      hw/cpu/core.o
  CC      hw/display/ramfb.o
  CC      hw/display/ramfb-standalone.o
  CC      hw/display/ads7846.o
  CC      hw/display/cirrus_vga.o
  CC      hw/display/cirrus_vga_isa.o
  CC      hw/display/pl110.o
  CC      hw/display/sii9022.o
  CC      hw/display/ssd0303.o
  CC      hw/display/ssd0323.o
  CC      hw/display/xenfb.o
  CC      hw/display/vga-pci.o
  CC      hw/display/edid-region.o
  CC      hw/display/vga-isa.o
  CC      hw/display/vmware_vga.o
  CC      hw/display/bochs-display.o
  CC      hw/display/blizzard.o
  CC      hw/display/exynos4210_fimd.o
  CC      hw/display/framebuffer.o
  CC      hw/display/tc6393xb.o
  CC      hw/display/qxl.o
  CC      hw/display/qxl-logger.o
  CC      hw/display/qxl-render.o
  CC      hw/dma/pl080.o
  CC      hw/dma/pl330.o
  CC      hw/dma/i8257.o
  CC      hw/dma/xilinx_axidma.o
  CC      hw/dma/xlnx-zynq-devcfg.o
  CC      hw/dma/xlnx-zdma.o
  CC      hw/gpio/max7310.o
  CC      hw/gpio/pl061.o
  CC      hw/gpio/zaurus.o
  CC      hw/gpio/gpio_key.o
  CC      hw/i2c/core.o
  CC      hw/i2c/smbus.o
  CC      hw/i2c/smbus_eeprom.o
  CC      hw/i2c/i2c-ddc.o
  CC      hw/i2c/versatile_i2c.o
  CC      hw/i2c/smbus_ich9.o
  CC      hw/i2c/pm_smbus.o
  CC      hw/i2c/bitbang_i2c.o
  CC      hw/i2c/exynos4210_i2c.o
  CC      hw/i2c/imx_i2c.o
  CC      hw/i2c/aspeed_i2c.o
  CC      hw/ide/core.o
  CC      hw/ide/atapi.o
  CC      hw/ide/qdev.o
  CC      hw/ide/pci.o
  CC      hw/ide/isa.o
  CC      hw/ide/piix.o
  CC      hw/ide/microdrive.o
  CC      hw/ide/ahci.o
  CC      hw/ide/ich.o
  CC      hw/ide/ahci-allwinner.o
  CC      hw/input/hid.o
  CC      hw/input/lm832x.o
  CC      hw/input/pckbd.o
  CC      hw/input/pl050.o
  CC      hw/input/ps2.o
  CC      hw/input/stellaris_input.o
  CC      hw/input/tsc2005.o
  CC      hw/input/virtio-input.o
  CC      hw/input/virtio-input-hid.o
  CC      hw/input/virtio-input-host.o
  CC      hw/intc/i8259_common.o
  CC      hw/intc/i8259.o
  CC      hw/intc/pl190.o
  CC      hw/intc/xlnx-pmu-iomod-intc.o
  CC      hw/intc/xlnx-zynqmp-ipi.o
  CC      hw/intc/imx_avic.o
  CC      hw/intc/imx_gpcv2.o
  CC      hw/intc/realview_gic.o
  CC      hw/intc/ioapic_common.o
  CC      hw/intc/arm_gic_common.o
  CC      hw/intc/arm_gic.o
  CC      hw/intc/arm_gicv2m.o
  CC      hw/intc/arm_gicv3_common.o
  CC      hw/intc/arm_gicv3.o
  CC      hw/intc/arm_gicv3_dist.o
  CC      hw/intc/arm_gicv3_redist.o
  CC      hw/intc/arm_gicv3_its_common.o
  CC      hw/intc/intc.o
  CC      hw/ipack/ipack.o
  CC      hw/ipack/tpci200.o
  CC      hw/ipmi/ipmi.o
  CC      hw/ipmi/ipmi_bmc_sim.o
  CC      hw/ipmi/ipmi_bmc_extern.o
  CC      hw/ipmi/isa_ipmi_kcs.o
  CC      hw/ipmi/isa_ipmi_bt.o
  CC      hw/isa/isa-bus.o
  CC      hw/isa/isa-superio.o
  CC      hw/isa/apm.o
  CC      hw/mem/pc-dimm.o
  CC      hw/mem/memory-device.o
  CC      hw/mem/nvdimm.o
  CC      hw/misc/applesmc.o
  CC      hw/misc/max111x.o
  CC      hw/misc/tmp105.o
  CC      hw/misc/tmp421.o
  CC      hw/misc/debugexit.o
  CC      hw/misc/sga.o
  CC      hw/misc/pc-testdev.o
  CC      hw/misc/pci-testdev.o
  CC      hw/misc/edu.o
  CC      hw/misc/pca9552.o
  CC      hw/misc/unimp.o
  CC      hw/misc/vmcoreinfo.o
  CC      hw/misc/arm_l2x0.o
  CC      hw/misc/arm_integrator_debug.o
  CC      hw/misc/a9scu.o
  CC      hw/misc/arm11scu.o
  CC      hw/net/xen_nic.o
  CC      hw/net/ne2000.o
  CC      hw/net/eepro100.o
  CC      hw/net/pcnet-pci.o
  CC      hw/net/pcnet.o
  CC      hw/net/e1000.o
  CC      hw/net/e1000x_common.o
  CC      hw/net/net_tx_pkt.o
  CC      hw/net/net_rx_pkt.o
  CC      hw/net/e1000e.o
  CC      hw/net/e1000e_core.o
  CC      hw/net/rtl8139.o
  CC      hw/net/vmxnet3.o
  CC      hw/net/smc91c111.o
  CC      hw/net/lan9118.o
  CC      hw/net/ne2000-isa.o
  CC      hw/net/xgmac.o
  CC      hw/net/xilinx_axienet.o
  CC      hw/net/allwinner_emac.o
  CC      hw/net/imx_fec.o
  CC      hw/net/cadence_gem.o
  CC      hw/net/stellaris_enet.o
  CC      hw/net/ftgmac100.o
  CC      hw/net/rocker/rocker.o
  CC      hw/net/rocker/rocker_fp.o
  CC      hw/net/rocker/rocker_desc.o
  CC      hw/net/rocker/rocker_world.o
  CC      hw/net/rocker/rocker_of_dpa.o
  CC      hw/net/can/can_sja1000.o
  CC      hw/net/can/can_kvaser_pci.o
  CC      hw/net/can/can_pcm3680_pci.o
  CC      hw/net/can/can_mioe3680_pci.o
  CC      hw/nvram/eeprom93xx.o
  CC      hw/nvram/fw_cfg.o
  CC      hw/nvram/chrp_nvram.o
  CC      hw/pci-bridge/pci_bridge_dev.o
  CC      hw/pci-bridge/pcie_root_port.o
  CC      hw/pci-bridge/gen_pcie_root_port.o
  CC      hw/pci-bridge/pcie_pci_bridge.o
  CC      hw/pci-bridge/pci_expander_bridge.o
  CC      hw/pci-bridge/xio3130_upstream.o
  CC      hw/pci-bridge/xio3130_downstream.o
  CC      hw/pci-bridge/ioh3420.o
  CC      hw/pci-bridge/i82801b11.o
  CC      hw/pci-host/pam.o
  CC      hw/pci-host/versatile.o
  CC      hw/pci-host/piix.o
  CC      hw/pci-host/q35.o
  CC      hw/pci-host/gpex.o
  CC      hw/pci-host/designware.o
  CC      hw/pci/pci.o
  CC      hw/pci/pci_bridge.o
  CC      hw/pci/msix.o
  CC      hw/pci/msi.o
  CC      hw/pci/shpc.o
  CC      hw/pci/pci_host.o
  CC      hw/pci/slotid_cap.o
  CC      hw/pci/pcie_host.o
  CC      hw/pci/pcie.o
  CC      hw/pci/pcie_aer.o
  CC      hw/pci/pcie_port.o
  CC      hw/pci/pci-stub.o
  CC      hw/pcmcia/pcmcia.o
  CC      hw/scsi/scsi-disk.o
  CC      hw/scsi/scsi-generic.o
  CC      hw/scsi/scsi-bus.o
  CC      hw/scsi/lsi53c895a.o
  CC      hw/scsi/mptsas.o
  CC      hw/scsi/mptconfig.o
  CC      hw/scsi/mptendian.o
  CC      hw/scsi/megasas.o
  CC      hw/scsi/vmw_pvscsi.o
  CC      hw/scsi/esp.o
  CC      hw/scsi/esp-pci.o
  CC      hw/sd/pl181.o
  CC      hw/sd/ssi-sd.o
  CC      hw/sd/sd.o
  CC      hw/sd/core.o
  CC      hw/sd/sdmmc-internal.o
  CC      hw/sd/sdhci.o
  CC      hw/smbios/smbios.o
  CC      hw/smbios/smbios_type_38.o
  CC      hw/smbios/smbios-stub.o
  CC      hw/smbios/smbios_type_38-stub.o
  CC      hw/ssi/pl022.o
  CC      hw/ssi/ssi.o
  CC      hw/ssi/xilinx_spips.o
  CC      hw/ssi/aspeed_smc.o
  CC      hw/ssi/stm32f2xx_spi.o
  CC      hw/ssi/mss-spi.o
  CC      hw/timer/arm_timer.o
  CC      hw/timer/arm_mptimer.o
  CC      hw/timer/armv7m_systick.o
  CC      hw/timer/a9gtimer.o
  CC      hw/timer/cadence_ttc.o
  CC      hw/timer/ds1338.o
  CC      hw/timer/hpet.o
  CC      hw/timer/i8254_common.o
  CC      hw/timer/i8254.o
  CC      hw/timer/pl031.o
  CC      hw/timer/twl92230.o
  CC      hw/timer/imx_epit.o
  CC      hw/timer/imx_gpt.o
  CC      hw/timer/xlnx-zynqmp-rtc.o
  CC      hw/timer/stm32f2xx_timer.o
  CC      hw/timer/aspeed_timer.o
  CC      hw/timer/cmsdk-apb-timer.o
  CC      hw/timer/cmsdk-apb-dualtimer.o
  CC      hw/timer/mss-timer.o
  CC      hw/tpm/tpm_util.o
  CC      hw/tpm/tpm_tis.o
  CC      hw/tpm/tpm_crb.o
  CC      hw/tpm/tpm_passthrough.o
  CC      hw/tpm/tpm_emulator.o
  CC      hw/usb/core.o
  CC      hw/usb/combined-packet.o
  CC      hw/usb/bus.o
  CC      hw/usb/libhw.o
  CC      hw/usb/desc.o
  CC      hw/usb/desc-msos.o
  CC      hw/usb/hcd-uhci.o
  CC      hw/usb/hcd-ohci.o
  CC      hw/usb/hcd-ehci.o
  CC      hw/usb/hcd-ehci-pci.o
  CC      hw/usb/hcd-ehci-sysbus.o
  CC      hw/usb/hcd-xhci.o
  CC      hw/usb/hcd-xhci-nec.o
  CC      hw/usb/hcd-musb.o
  CC      hw/usb/dev-hub.o
  CC      hw/usb/dev-hid.o
  CC      hw/usb/dev-wacom.o
  CC      hw/usb/dev-storage.o
  CC      hw/usb/dev-uas.o
  CC      hw/usb/dev-audio.o
  CC      hw/usb/dev-serial.o
  CC      hw/usb/dev-network.o
  CC      hw/usb/dev-bluetooth.o
  CC      hw/usb/dev-smartcard-reader.o
  CC      hw/usb/ccid-card-passthru.o
  CC      hw/usb/ccid-card-emulated.o
  CC      hw/usb/dev-mtp.o
  CC      hw/usb/host-stub.o
  CC      hw/virtio/virtio-bus.o
  CC      hw/virtio/virtio-rng.o
  CC      hw/virtio/virtio-pci.o
  CC      hw/virtio/virtio-mmio.o
  CC      hw/virtio/vhost-stub.o
  CC      hw/watchdog/watchdog.o
  CC      hw/watchdog/cmsdk-apb-watchdog.o
  CC      hw/watchdog/wdt_i6300esb.o
  CC      hw/watchdog/wdt_ib700.o
  CC      hw/watchdog/wdt_aspeed.o
  CC      hw/xen/xen_backend.o
  CC      hw/xen/xen_devconfig.o
  CC      hw/xen/xen_pvdev.o
  CC      hw/xen/xen-common.o
  CC      migration/migration.o
  CC      migration/socket.o
  CC      migration/fd.o
  CC      migration/exec.o
  CC      migration/tls.o
  CC      migration/channel.o
  CC      migration/savevm.o
  CC      migration/colo.o
  CC      migration/colo-failover.o
  CC      migration/vmstate.o
  CC      migration/vmstate-types.o
  CC      migration/page_cache.o
  CC      migration/qemu-file.o
  CC      migration/global_state.o
  CC      migration/qemu-file-channel.o
  CC      migration/xbzrle.o
  CC      migration/postcopy-ram.o
  CC      migration/qjson.o
  CC      migration/block-dirty-bitmap.o
  CC      migration/rdma.o
  CC      migration/block.o
  CC      net/net.o
  CC      net/queue.o
  CC      net/checksum.o
  CC      net/util.o
  CC      net/hub.o
  CC      net/socket.o
  CC      net/dump.o
  CC      net/eth.o
  CC      net/l2tpv3.o
  CC      net/vhost-user.o
  CC      net/slirp.o
  CC      net/filter.o
  CC      net/filter-buffer.o
  CC      net/filter-mirror.o
  CC      net/colo-compare.o
  CC      net/colo.o
  CC      net/filter-rewriter.o
  CC      net/filter-replay.o
  CC      net/tap.o
  CC      net/tap-linux.o
  CC      net/can/can_core.o
  CC      net/can/can_host.o
  CC      net/can/can_socketcan.o
  CC      qom/cpu.o
  CC      replay/replay.o
  CC      replay/replay-internal.o
  CC      replay/replay-events.o
  CC      replay/replay-time.o
  CC      replay/replay-input.o
  CC      replay/replay-char.o
  CC      replay/replay-snapshot.o
  CC      replay/replay-net.o
  CC      replay/replay-audio.o
  CC      slirp/cksum.o
  CC      slirp/if.o
  CC      slirp/ip_icmp.o
  CC      slirp/ip6_icmp.o
  CC      slirp/ip6_input.o
  CC      slirp/ip6_output.o
  CC      slirp/ip_input.o
  CC      slirp/ip_output.o
  CC      slirp/dnssearch.o
  CC      slirp/dhcpv6.o
  CC      slirp/slirp.o
  CC      slirp/mbuf.o
  CC      slirp/misc.o
  CC      slirp/sbuf.o
  CC      slirp/socket.o
  CC      slirp/tcp_input.o
  CC      slirp/tcp_output.o
  CC      slirp/tcp_timer.o
  CC      slirp/tcp_subr.o
  CC      slirp/udp.o
  CC      slirp/udp6.o
  CC      slirp/bootp.o
  CC      slirp/tftp.o
  CC      slirp/arp_table.o
  CC      slirp/ndp_table.o
  CC      slirp/ncsi.o
  CC      ui/keymaps.o
  CC      ui/console.o
  CC      ui/cursor.o
  CC      ui/qemu-pixman.o
  CC      ui/input.o
  CC      ui/input-keymap.o
  CC      ui/input-legacy.o
  CC      ui/input-linux.o
  CC      ui/spice-core.o
  CC      ui/spice-input.o
  CC      ui/spice-display.o
  CC      ui/vnc.o
  CC      ui/vnc-enc-zlib.o
  CC      ui/vnc-enc-hextile.o
  CC      ui/vnc-enc-tight.o
  CC      ui/vnc-palette.o
  CC      ui/vnc-enc-zrle.o
  CC      ui/vnc-auth-vencrypt.o
  CC      ui/vnc-ws.o
  CC      ui/vnc-jobs.o
  VERT    ui/shader/texture-blit-vert.h
  VERT    ui/shader/texture-blit-flip-vert.h
  CC      ui/console-gl.o
  FRAG    ui/shader/texture-blit-frag.h
  CC      ui/egl-helpers.o
  CC      ui/egl-context.o
  CC      ui/egl-headless.o
  CC      audio/ossaudio.o
  CC      ui/sdl.o
  CC      ui/sdl_zoom.o
  CC      ui/x_keymap.o
  CC      ui/curses.o
  CC      chardev/char.o
  CC      chardev/char-fd.o
  CC      chardev/char-fe.o
  CC      chardev/char-file.o
  CC      chardev/char-io.o
  CC      chardev/char-mux.o
  CC      chardev/char-null.o
  CC      chardev/char-parallel.o
  CC      chardev/char-pipe.o
  CC      chardev/char-pty.o
  CC      chardev/char-ringbuf.o
  CC      chardev/char-serial.o
  CC      chardev/char-socket.o
  CC      chardev/char-stdio.o
  CC      chardev/char-udp.o
  LINK    tests/qemu-iotests/socket_scm_helper
  CC      qga/commands.o
  CC      qga/guest-agent-command-state.o
  CC      qga/main.o
  AS      optionrom/multiboot.o
  CC      qga/commands-posix.o
  AS      optionrom/linuxboot.o
  CC      optionrom/linuxboot_dma.o
  AS      optionrom/kvmvapic.o
  CC      qga/channel-posix.o
  BUILD   optionrom/multiboot.img
  CC      qga/qapi-generated/qga-qapi-types.o
  BUILD   optionrom/linuxboot.img
  BUILD   optionrom/linuxboot_dma.img
  BUILD   optionrom/kvmvapic.img
  BUILD   optionrom/multiboot.raw
  CC      qga/qapi-generated/qga-qapi-visit.o
  CC      qga/qapi-generated/qga-qapi-commands.o
  BUILD   optionrom/linuxboot.raw
  BUILD   optionrom/linuxboot_dma.raw
  AR      libqemuutil.a
  BUILD   optionrom/kvmvapic.raw
  CC      qemu-img.o
  SIGN    optionrom/multiboot.bin
  SIGN    optionrom/linuxboot.bin
  SIGN    optionrom/linuxboot_dma.bin
  CC      ui/shader.o
  SIGN    optionrom/kvmvapic.bin
  LINK    qemu-ga
  LINK    ivshmem-client
  LINK    ivshmem-server
  LINK    qemu-nbd
  LINK    qemu-io
  LINK    qemu-edid
  LINK    scsi/qemu-pr-helper
  LINK    qemu-bridge-helper
  GEN     x86_64-softmmu/hmp-commands-info.h
  GEN     x86_64-softmmu/hmp-commands.h
  GEN     x86_64-softmmu/config-target.h
  GEN     aarch64-softmmu/hmp-commands.h
  GEN     aarch64-softmmu/hmp-commands-info.h
  GEN     aarch64-softmmu/config-target.h
  CC      x86_64-softmmu/exec.o
  CC      x86_64-softmmu/tcg/tcg-op-vec.o
  CC      x86_64-softmmu/tcg/tcg-op.o
  CC      x86_64-softmmu/tcg/tcg.o
  CC      x86_64-softmmu/tcg/tcg-op-gvec.o
  CC      x86_64-softmmu/tcg/tcg-common.o
  CC      aarch64-softmmu/exec.o
  CC      x86_64-softmmu/tcg/optimize.o
  CC      x86_64-softmmu/fpu/softfloat.o
  CC      aarch64-softmmu/tcg/tcg.o
  CC      x86_64-softmmu/disas.o
  GEN     x86_64-softmmu/gdbstub-xml.c
  LINK    qemu-img
  CC      x86_64-softmmu/arch_init.o
  CC      x86_64-softmmu/cpus.o
  CC      x86_64-softmmu/monitor.o
  CC      x86_64-softmmu/gdbstub.o
  CC      x86_64-softmmu/balloon.o
  CC      x86_64-softmmu/ioport.o
  CC      x86_64-softmmu/numa.o
  CC      x86_64-softmmu/qtest.o
  CC      x86_64-softmmu/memory.o
  CC      x86_64-softmmu/memory_mapping.o
  CC      x86_64-softmmu/dump.o
  CC      x86_64-softmmu/win_dump.o
  CC      x86_64-softmmu/migration/ram.o
  CC      x86_64-softmmu/accel/accel.o
  CC      x86_64-softmmu/accel/kvm/kvm-all.o
  CC      aarch64-softmmu/tcg/tcg-op.o
  CC      aarch64-softmmu/tcg/tcg-op-vec.o
  CC      x86_64-softmmu/accel/stubs/hax-stub.o
  CC      aarch64-softmmu/tcg/tcg-op-gvec.o
  CC      x86_64-softmmu/accel/stubs/hvf-stub.o
  CC      x86_64-softmmu/accel/stubs/whpx-stub.o
  CC      x86_64-softmmu/accel/tcg/tcg-all.o
  CC      x86_64-softmmu/accel/tcg/cputlb.o
  CC      x86_64-softmmu/accel/tcg/tcg-runtime.o
  CC      aarch64-softmmu/tcg/tcg-common.o
  CC      x86_64-softmmu/accel/tcg/tcg-runtime-gvec.o
  CC      x86_64-softmmu/accel/tcg/cpu-exec.o
  CC      x86_64-softmmu/accel/tcg/cpu-exec-common.o
  CC      x86_64-softmmu/accel/tcg/translate-all.o
  CC      x86_64-softmmu/accel/tcg/translator.o
  CC      aarch64-softmmu/tcg/optimize.o
  CC      aarch64-softmmu/fpu/softfloat.o
  CC      x86_64-softmmu/hw/block/virtio-blk.o
  CC      aarch64-softmmu/disas.o
  GEN     aarch64-softmmu/gdbstub-xml.c
  CC      aarch64-softmmu/arch_init.o
  CC      x86_64-softmmu/hw/block/vhost-user-blk.o
  CC      x86_64-softmmu/hw/block/dataplane/virtio-blk.o
  CC      aarch64-softmmu/cpus.o
  CC      x86_64-softmmu/hw/char/virtio-serial-bus.o
  CC      aarch64-softmmu/monitor.o
  CC      aarch64-softmmu/gdbstub.o
  CC      x86_64-softmmu/hw/display/vga.o
  CC      aarch64-softmmu/balloon.o
  CC      aarch64-softmmu/ioport.o
  CC      aarch64-softmmu/numa.o
  CC      aarch64-softmmu/qtest.o
  CC      aarch64-softmmu/memory.o
  CC      aarch64-softmmu/memory_mapping.o
  CC      aarch64-softmmu/dump.o
  CC      x86_64-softmmu/hw/display/virtio-gpu.o
  CC      aarch64-softmmu/migration/ram.o
  CC      aarch64-softmmu/accel/accel.o
  CC      x86_64-softmmu/hw/display/virtio-gpu-3d.o
  CC      aarch64-softmmu/accel/stubs/hax-stub.o
  CC      aarch64-softmmu/accel/stubs/hvf-stub.o
  CC      aarch64-softmmu/accel/stubs/whpx-stub.o
  CC      aarch64-softmmu/accel/stubs/kvm-stub.o
  CC      aarch64-softmmu/accel/tcg/tcg-all.o
  CC      aarch64-softmmu/accel/tcg/cputlb.o
  CC      x86_64-softmmu/hw/display/virtio-gpu-pci.o
  CC      aarch64-softmmu/accel/tcg/tcg-runtime.o
  CC      aarch64-softmmu/accel/tcg/tcg-runtime-gvec.o
  CC      aarch64-softmmu/accel/tcg/cpu-exec.o
  CC      aarch64-softmmu/accel/tcg/cpu-exec-common.o
  CC      x86_64-softmmu/hw/display/virtio-vga.o
  CC      x86_64-softmmu/hw/hyperv/hyperv.o
  CC      aarch64-softmmu/accel/tcg/translate-all.o
  CC      aarch64-softmmu/accel/tcg/translator.o
  CC      x86_64-softmmu/hw/hyperv/hyperv_testdev.o
  CC      aarch64-softmmu/hw/adc/stm32f2xx_adc.o
  CC      x86_64-softmmu/hw/intc/apic.o
  CC      aarch64-softmmu/hw/block/virtio-blk.o
  CC      aarch64-softmmu/hw/block/vhost-user-blk.o
  CC      x86_64-softmmu/hw/intc/apic_common.o
  CC      x86_64-softmmu/hw/intc/ioapic.o
  CC      aarch64-softmmu/hw/block/dataplane/virtio-blk.o
  CC      x86_64-softmmu/hw/isa/lpc_ich9.o
  CC      aarch64-softmmu/hw/char/exynos4210_uart.o
  CC      aarch64-softmmu/hw/char/omap_uart.o
  CC      aarch64-softmmu/hw/char/digic-uart.o
  CC      aarch64-softmmu/hw/char/stm32f2xx_usart.o
  CC      x86_64-softmmu/hw/misc/ivshmem.o
  CC      x86_64-softmmu/hw/misc/pvpanic.o
  CC      x86_64-softmmu/hw/net/virtio-net.o
  CC      aarch64-softmmu/hw/char/bcm2835_aux.o
  CC      x86_64-softmmu/hw/net/vhost_net.o
  CC      aarch64-softmmu/hw/char/virtio-serial-bus.o
  CC      x86_64-softmmu/hw/rdma/rdma_utils.o
  CC      x86_64-softmmu/hw/rdma/rdma_backend.o
  CC      x86_64-softmmu/hw/rdma/rdma_rm.o
  CC      aarch64-softmmu/hw/cpu/arm11mpcore.o
  CC      aarch64-softmmu/hw/cpu/realview_mpcore.o
  CC      x86_64-softmmu/hw/rdma/vmw/pvrdma_dev_ring.o
  CC      aarch64-softmmu/hw/cpu/a9mpcore.o
  CC      aarch64-softmmu/hw/cpu/a15mpcore.o
  CC      aarch64-softmmu/hw/display/omap_dss.o
  CC      x86_64-softmmu/hw/rdma/vmw/pvrdma_cmd.o
  CC      x86_64-softmmu/hw/rdma/vmw/pvrdma_qp_ops.o
  CC      x86_64-softmmu/hw/rdma/vmw/pvrdma_main.o
  CC      x86_64-softmmu/hw/scsi/virtio-scsi.o
  CC      aarch64-softmmu/hw/display/omap_lcdc.o
  CC      aarch64-softmmu/hw/display/pxa2xx_lcd.o
  CC      x86_64-softmmu/hw/scsi/virtio-scsi-dataplane.o
  CC      x86_64-softmmu/hw/scsi/vhost-scsi-common.o
  CC      aarch64-softmmu/hw/display/bcm2835_fb.o
  CC      x86_64-softmmu/hw/scsi/vhost-scsi.o
  CC      aarch64-softmmu/hw/display/vga.o
  CC      aarch64-softmmu/hw/display/virtio-gpu.o
  CC      x86_64-softmmu/hw/scsi/vhost-user-scsi.o
  CC      x86_64-softmmu/hw/timer/mc146818rtc.o
  CC      x86_64-softmmu/hw/vfio/common.o
  CC      x86_64-softmmu/hw/vfio/pci.o
  CC      aarch64-softmmu/hw/display/virtio-gpu-3d.o
  CC      x86_64-softmmu/hw/vfio/pci-quirks.o
  CC      x86_64-softmmu/hw/vfio/display.o
  CC      aarch64-softmmu/hw/display/virtio-gpu-pci.o
  CC      aarch64-softmmu/hw/display/dpcd.o
  CC      aarch64-softmmu/hw/display/xlnx_dp.o
  CC      x86_64-softmmu/hw/vfio/platform.o
  CC      aarch64-softmmu/hw/dma/xlnx_dpdma.o
  CC      aarch64-softmmu/hw/dma/omap_dma.o
  CC      x86_64-softmmu/hw/vfio/spapr.o
  CC      aarch64-softmmu/hw/dma/soc_dma.o
  CC      x86_64-softmmu/hw/virtio/virtio.o
  CC      x86_64-softmmu/hw/virtio/virtio-balloon.o
  CC      aarch64-softmmu/hw/dma/pxa2xx_dma.o
  CC      aarch64-softmmu/hw/dma/bcm2835_dma.o
  CC      x86_64-softmmu/hw/virtio/virtio-crypto.o
  CC      x86_64-softmmu/hw/virtio/virtio-crypto-pci.o
  CC      x86_64-softmmu/hw/virtio/vhost.o
  CC      x86_64-softmmu/hw/virtio/vhost-backend.o
  CC      aarch64-softmmu/hw/gpio/omap_gpio.o
  CC      aarch64-softmmu/hw/gpio/imx_gpio.o
  CC      aarch64-softmmu/hw/gpio/bcm2835_gpio.o
  CC      x86_64-softmmu/hw/virtio/vhost-user.o
  CC      x86_64-softmmu/hw/virtio/vhost-vsock.o
  CC      x86_64-softmmu/hw/xen/xen-host-pci-device.o
  CC      aarch64-softmmu/hw/i2c/omap_i2c.o
  CC      x86_64-softmmu/hw/xen/xen_pt.o
  CC      aarch64-softmmu/hw/input/pxa2xx_keypad.o
  CC      x86_64-softmmu/hw/xen/xen_pt_config_init.o
  CC      x86_64-softmmu/hw/xen/xen_pt_graphics.o
  CC      x86_64-softmmu/hw/xen/xen_pt_msi.o
  CC      aarch64-softmmu/hw/input/tsc210x.o
  CC      x86_64-softmmu/hw/xen/xen_pt_load_rom.o
  CC      aarch64-softmmu/hw/intc/armv7m_nvic.o
  CC      x86_64-softmmu/hw/i386/multiboot.o
  CC      x86_64-softmmu/hw/i386/pc.o
  CC      x86_64-softmmu/hw/i386/pc_piix.o
  CC      x86_64-softmmu/hw/i386/pc_q35.o
  CC      x86_64-softmmu/hw/i386/pc_sysfw.o
  CC      aarch64-softmmu/hw/intc/exynos4210_gic.o
  CC      x86_64-softmmu/hw/i386/x86-iommu.o
  CC      aarch64-softmmu/hw/intc/exynos4210_combiner.o
  CC      aarch64-softmmu/hw/intc/omap_intc.o
  CC      x86_64-softmmu/hw/i386/intel_iommu.o
  CC      x86_64-softmmu/hw/i386/amd_iommu.o
  CC      aarch64-softmmu/hw/intc/bcm2835_ic.o
  CC      x86_64-softmmu/hw/i386/vmport.o
  CC      x86_64-softmmu/hw/i386/vmmouse.o
  CC      aarch64-softmmu/hw/intc/bcm2836_control.o
  CC      aarch64-softmmu/hw/intc/allwinner-a10-pic.o
  CC      aarch64-softmmu/hw/intc/aspeed_vic.o
  CC      x86_64-softmmu/hw/i386/kvmvapic.o
  CC      x86_64-softmmu/hw/i386/acpi-build.o
  CC      x86_64-softmmu/hw/i386/../xenpv/xen_machine_pv.o
  CC      aarch64-softmmu/hw/intc/arm_gicv3_cpuif.o
  CC      x86_64-softmmu/hw/i386/kvm/clock.o
  CC      aarch64-softmmu/hw/misc/ivshmem.o
  CC      x86_64-softmmu/hw/i386/kvm/apic.o
  CC      x86_64-softmmu/hw/i386/kvm/i8259.o
  CC      x86_64-softmmu/hw/i386/kvm/ioapic.o
  CC      x86_64-softmmu/hw/i386/kvm/i8254.o
  CC      x86_64-softmmu/hw/i386/xen/xen_platform.o
  CC      x86_64-softmmu/hw/i386/xen/xen_apic.o
  CC      aarch64-softmmu/hw/misc/arm_sysctl.o
  CC      x86_64-softmmu/hw/i386/xen/xen_pvdevice.o
  CC      x86_64-softmmu/hw/i386/xen/xen-hvm.o
  CC      x86_64-softmmu/hw/i386/xen/xen-mapcache.o
  CC      x86_64-softmmu/target/i386/helper.o
  CC      x86_64-softmmu/target/i386/cpu.o
  CC      x86_64-softmmu/target/i386/gdbstub.o
  CC      aarch64-softmmu/hw/misc/cbus.o
  CC      x86_64-softmmu/target/i386/xsave_helper.o
  CC      x86_64-softmmu/target/i386/translate.o
  CC      x86_64-softmmu/target/i386/bpt_helper.o
  CC      aarch64-softmmu/hw/misc/exynos4210_pmu.o
  CC      x86_64-softmmu/target/i386/cc_helper.o
  CC      x86_64-softmmu/target/i386/excp_helper.o
  CC      x86_64-softmmu/target/i386/fpu_helper.o
  CC      x86_64-softmmu/target/i386/int_helper.o
  CC      aarch64-softmmu/hw/misc/exynos4210_clk.o
  CC      aarch64-softmmu/hw/misc/exynos4210_rng.o
  CC      x86_64-softmmu/target/i386/mem_helper.o
  CC      aarch64-softmmu/hw/misc/imx_ccm.o
  CC      aarch64-softmmu/hw/misc/imx31_ccm.o
  CC      x86_64-softmmu/target/i386/misc_helper.o
  CC      aarch64-softmmu/hw/misc/imx25_ccm.o
  CC      x86_64-softmmu/target/i386/mpx_helper.o
  CC      x86_64-softmmu/target/i386/seg_helper.o
  CC      x86_64-softmmu/target/i386/smm_helper.o
  CC      x86_64-softmmu/target/i386/svm_helper.o
  CC      aarch64-softmmu/hw/misc/imx6_ccm.o
  CC      aarch64-softmmu/hw/misc/imx6ul_ccm.o
  CC      x86_64-softmmu/target/i386/machine.o
  CC      x86_64-softmmu/target/i386/arch_memory_mapping.o
  CC      aarch64-softmmu/hw/misc/imx6_src.o
  CC      x86_64-softmmu/target/i386/arch_dump.o
  CC      aarch64-softmmu/hw/misc/imx7_ccm.o
  CC      x86_64-softmmu/target/i386/monitor.o
  CC      x86_64-softmmu/target/i386/kvm.o
  CC      x86_64-softmmu/target/i386/hyperv.o
  CC      x86_64-softmmu/target/i386/sev.o
  CC      aarch64-softmmu/hw/misc/imx2_wdt.o
  GEN     trace/generated-helpers.c
  CC      x86_64-softmmu/trace/control-target.o
  CC      aarch64-softmmu/hw/misc/imx7_snvs.o
  CC      aarch64-softmmu/hw/misc/imx7_gpr.o
  CC      x86_64-softmmu/gdbstub-xml.o
  CC      aarch64-softmmu/hw/misc/mst_fpga.o
  CC      aarch64-softmmu/hw/misc/omap_clk.o
  CC      aarch64-softmmu/hw/misc/omap_gpmc.o
  CC      aarch64-softmmu/hw/misc/omap_l4.o
  CC      aarch64-softmmu/hw/misc/omap_sdrc.o
  CC      aarch64-softmmu/hw/misc/omap_tap.o
  CC      aarch64-softmmu/hw/misc/bcm2835_mbox.o
  CC      aarch64-softmmu/hw/misc/bcm2835_property.o
  CC      aarch64-softmmu/hw/misc/bcm2835_rng.o
  CC      aarch64-softmmu/hw/misc/zynq_slcr.o
  CC      aarch64-softmmu/hw/misc/zynq-xadc.o
  CC      aarch64-softmmu/hw/misc/stm32f2xx_syscfg.o
  CC      aarch64-softmmu/hw/misc/mps2-fpgaio.o
  CC      aarch64-softmmu/hw/misc/mps2-scc.o
  CC      aarch64-softmmu/hw/misc/tz-mpc.o
  CC      aarch64-softmmu/hw/misc/tz-msc.o
  CC      x86_64-softmmu/trace/generated-helpers.o
  CC      aarch64-softmmu/hw/misc/tz-ppc.o
  CC      aarch64-softmmu/hw/misc/iotkit-secctl.o
  CC      aarch64-softmmu/hw/misc/iotkit-sysctl.o
  CC      aarch64-softmmu/hw/misc/iotkit-sysinfo.o
  CC      aarch64-softmmu/hw/misc/auxbus.o
  CC      aarch64-softmmu/hw/misc/aspeed_scu.o
  CC      aarch64-softmmu/hw/misc/aspeed_sdmc.o
  CC      aarch64-softmmu/hw/misc/msf2-sysreg.o
  CC      aarch64-softmmu/hw/net/virtio-net.o
  CC      aarch64-softmmu/hw/net/vhost_net.o
  CC      aarch64-softmmu/hw/pcmcia/pxa2xx.o
  CC      aarch64-softmmu/hw/rdma/rdma_utils.o
  LINK    x86_64-softmmu/qemu-system-x86_64
  CC      aarch64-softmmu/hw/rdma/rdma_backend.o
  CC      aarch64-softmmu/hw/rdma/rdma_rm.o
  CC      aarch64-softmmu/hw/rdma/vmw/pvrdma_dev_ring.o
  CC      aarch64-softmmu/hw/rdma/vmw/pvrdma_cmd.o
  CC      aarch64-softmmu/hw/rdma/vmw/pvrdma_qp_ops.o
  CC      aarch64-softmmu/hw/rdma/vmw/pvrdma_main.o
  CC      aarch64-softmmu/hw/scsi/virtio-scsi.o
  CC      aarch64-softmmu/hw/scsi/virtio-scsi-dataplane.o
  CC      aarch64-softmmu/hw/scsi/vhost-scsi-common.o
  CC      aarch64-softmmu/hw/scsi/vhost-scsi.o
  CC      aarch64-softmmu/hw/scsi/vhost-user-scsi.o
  CC      aarch64-softmmu/hw/sd/omap_mmc.o
  CC      aarch64-softmmu/hw/sd/pxa2xx_mmci.o
  CC      aarch64-softmmu/hw/sd/bcm2835_sdhost.o
  CC      aarch64-softmmu/hw/ssi/omap_spi.o
  CC      aarch64-softmmu/hw/ssi/imx_spi.o
  CC      aarch64-softmmu/hw/timer/exynos4210_mct.o
  CC      aarch64-softmmu/hw/timer/exynos4210_pwm.o
  CC      aarch64-softmmu/hw/timer/exynos4210_rtc.o
  CC      aarch64-softmmu/hw/timer/omap_gptimer.o
  CC      aarch64-softmmu/hw/timer/omap_synctimer.o
  CC      aarch64-softmmu/hw/timer/pxa2xx_timer.o
  CC      aarch64-softmmu/hw/timer/digic-timer.o
  CC      aarch64-softmmu/hw/timer/allwinner-a10-pit.o
  CC      aarch64-softmmu/hw/usb/tusb6010.o
  CC      aarch64-softmmu/hw/usb/chipidea.o
  CC      aarch64-softmmu/hw/vfio/common.o
  CC      aarch64-softmmu/hw/vfio/pci.o
  CC      aarch64-softmmu/hw/vfio/pci-quirks.o
  CC      aarch64-softmmu/hw/vfio/display.o
  CC      aarch64-softmmu/hw/vfio/platform.o
  CC      aarch64-softmmu/hw/vfio/calxeda-xgmac.o
  CC      aarch64-softmmu/hw/vfio/amd-xgbe.o
  CC      aarch64-softmmu/hw/vfio/spapr.o
  CC      aarch64-softmmu/hw/virtio/virtio.o
  CC      aarch64-softmmu/hw/virtio/virtio-balloon.o
  CC      aarch64-softmmu/hw/virtio/virtio-crypto.o
  CC      aarch64-softmmu/hw/virtio/virtio-crypto-pci.o
  CC      aarch64-softmmu/hw/virtio/vhost.o
  CC      aarch64-softmmu/hw/virtio/vhost-backend.o
  CC      aarch64-softmmu/hw/virtio/vhost-user.o
  CC      aarch64-softmmu/hw/virtio/vhost-vsock.o
  CC      aarch64-softmmu/hw/arm/boot.o
  CC      aarch64-softmmu/hw/arm/virt.o
  CC      aarch64-softmmu/hw/arm/sysbus-fdt.o
  CC      aarch64-softmmu/hw/arm/virt-acpi-build.o
  CC      aarch64-softmmu/hw/arm/digic_boards.o
  CC      aarch64-softmmu/hw/arm/exynos4_boards.o
  CC      aarch64-softmmu/hw/arm/highbank.o
  CC      aarch64-softmmu/hw/arm/integratorcp.o
  CC      aarch64-softmmu/hw/arm/mainstone.o
  CC      aarch64-softmmu/hw/arm/musicpal.o
  CC      aarch64-softmmu/hw/arm/netduino2.o
  CC      aarch64-softmmu/hw/arm/nseries.o
  CC      aarch64-softmmu/hw/arm/omap_sx1.o
  CC      aarch64-softmmu/hw/arm/palm.o
  CC      aarch64-softmmu/hw/arm/gumstix.o
  CC      aarch64-softmmu/hw/arm/spitz.o
  CC      aarch64-softmmu/hw/arm/tosa.o
  CC      aarch64-softmmu/hw/arm/z2.o
  CC      aarch64-softmmu/hw/arm/realview.o
  CC      aarch64-softmmu/hw/arm/stellaris.o
  CC      aarch64-softmmu/hw/arm/collie.o
  CC      aarch64-softmmu/hw/arm/vexpress.o
  CC      aarch64-softmmu/hw/arm/versatilepb.o
  CC      aarch64-softmmu/hw/arm/xilinx_zynq.o
  CC      aarch64-softmmu/hw/arm/armv7m.o
  CC      aarch64-softmmu/hw/arm/exynos4210.o
  CC      aarch64-softmmu/hw/arm/pxa2xx.o
  CC      aarch64-softmmu/hw/arm/pxa2xx_gpio.o
  CC      aarch64-softmmu/hw/arm/pxa2xx_pic.o
  CC      aarch64-softmmu/hw/arm/digic.o
  CC      aarch64-softmmu/hw/arm/omap1.o
  CC      aarch64-softmmu/hw/arm/omap2.o
  CC      aarch64-softmmu/hw/arm/strongarm.o
  CC      aarch64-softmmu/hw/arm/allwinner-a10.o
  CC      aarch64-softmmu/hw/arm/cubieboard.o
  CC      aarch64-softmmu/hw/arm/bcm2835_peripherals.o
  CC      aarch64-softmmu/hw/arm/bcm2836.o
  CC      aarch64-softmmu/hw/arm/raspi.o
  CC      aarch64-softmmu/hw/arm/stm32f205_soc.o
  CC      aarch64-softmmu/hw/arm/xlnx-zynqmp.o
  CC      aarch64-softmmu/hw/arm/xlnx-zcu102.o
  CC      aarch64-softmmu/hw/arm/xlnx-versal.o
  CC      aarch64-softmmu/hw/arm/xlnx-versal-virt.o
  CC      aarch64-softmmu/hw/arm/fsl-imx25.o
  CC      aarch64-softmmu/hw/arm/imx25_pdk.o
  CC      aarch64-softmmu/hw/arm/fsl-imx31.o
  CC      aarch64-softmmu/hw/arm/kzm.o
  CC      aarch64-softmmu/hw/arm/fsl-imx6.o
  CC      aarch64-softmmu/hw/arm/sabrelite.o
  CC      aarch64-softmmu/hw/arm/aspeed_soc.o
  CC      aarch64-softmmu/hw/arm/aspeed.o
  CC      aarch64-softmmu/hw/arm/mps2.o
  CC      aarch64-softmmu/hw/arm/mps2-tz.o
  CC      aarch64-softmmu/hw/arm/msf2-soc.o
  CC      aarch64-softmmu/hw/arm/msf2-som.o
  CC      aarch64-softmmu/hw/arm/iotkit.o
  CC      aarch64-softmmu/hw/arm/fsl-imx7.o
  CC      aarch64-softmmu/hw/arm/mcimx7d-sabre.o
  CC      aarch64-softmmu/hw/arm/smmu-common.o
  CC      aarch64-softmmu/hw/arm/smmuv3.o
  CC      aarch64-softmmu/hw/arm/fsl-imx6ul.o
  CC      aarch64-softmmu/hw/arm/mcimx6ul-evk.o
  CC      aarch64-softmmu/hw/arm/nrf51_soc.o
  CC      aarch64-softmmu/hw/arm/microbit.o
  CC      aarch64-softmmu/target/arm/arm-semi.o
  CC      aarch64-softmmu/target/arm/machine.o
  CC      aarch64-softmmu/target/arm/psci.o
  CC      aarch64-softmmu/target/arm/arch_dump.o
  CC      aarch64-softmmu/target/arm/monitor.o
  CC      aarch64-softmmu/target/arm/kvm-stub.o
  CC      aarch64-softmmu/target/arm/translate.o
  CC      aarch64-softmmu/target/arm/op_helper.o
  CC      aarch64-softmmu/target/arm/helper.o
  CC      aarch64-softmmu/target/arm/cpu.o
  CC      aarch64-softmmu/target/arm/neon_helper.o
  CC      aarch64-softmmu/target/arm/iwmmxt_helper.o
  CC      aarch64-softmmu/target/arm/vec_helper.o
  CC      aarch64-softmmu/target/arm/gdbstub.o
  CC      aarch64-softmmu/target/arm/cpu64.o
  CC      aarch64-softmmu/target/arm/translate-a64.o
  CC      aarch64-softmmu/target/arm/helper-a64.o
  CC      aarch64-softmmu/target/arm/gdbstub64.o
  CC      aarch64-softmmu/target/arm/crypto_helper.o
  CC      aarch64-softmmu/target/arm/arm-powerctl.o
  GEN     aarch64-softmmu/target/arm/decode-sve.inc.c
  CC      aarch64-softmmu/target/arm/sve_helper.o
  GEN     trace/generated-helpers.c
  CC      aarch64-softmmu/trace/control-target.o
  CC      aarch64-softmmu/gdbstub-xml.o
  CC      aarch64-softmmu/target/arm/translate-sve.o
  CC      aarch64-softmmu/trace/generated-helpers.o
  LINK    aarch64-softmmu/qemu-system-aarch64
  TEST    tests/qapi-schema/alternate-any.out
  TEST    tests/qapi-schema/alternate-array.out
  TEST    tests/qapi-schema/alternate-clash.out
  TEST    tests/qapi-schema/alternate-conflict-dict.out
  TEST    tests/qapi-schema/alternate-base.out
  TEST    tests/qapi-schema/alternate-conflict-enum-bool.out
  TEST    tests/qapi-schema/alternate-conflict-enum-int.out
  TEST    tests/qapi-schema/alternate-conflict-string.out
  TEST    tests/qapi-schema/alternate-conflict-bool-string.out
  TEST    tests/qapi-schema/alternate-conflict-num-string.out
  TEST    tests/qapi-schema/alternate-empty.out
  TEST    tests/qapi-schema/alternate-nested.out
  TEST    tests/qapi-schema/alternate-unknown.out
  TEST    tests/qapi-schema/args-alternate.out
  TEST    tests/qapi-schema/args-any.out
  TEST    tests/qapi-schema/args-array-empty.out
  TEST    tests/qapi-schema/args-array-unknown.out
  TEST    tests/qapi-schema/args-bad-boxed.out
  TEST    tests/qapi-schema/args-boxed-anon.out
  TEST    tests/qapi-schema/args-boxed-empty.out
  TEST    tests/qapi-schema/args-boxed-string.out
  TEST    tests/qapi-schema/args-int.out
  TEST    tests/qapi-schema/args-invalid.out
  TEST    tests/qapi-schema/args-member-array-bad.out
  TEST    tests/qapi-schema/args-member-case.out
  TEST    tests/qapi-schema/args-member-unknown.out
  TEST    tests/qapi-schema/args-name-clash.out
  TEST    tests/qapi-schema/args-union.out
  TEST    tests/qapi-schema/args-unknown.out
  TEST    tests/qapi-schema/bad-base.out
  TEST    tests/qapi-schema/bad-data.out
  TEST    tests/qapi-schema/bad-ident.out
  TEST    tests/qapi-schema/bad-if.out
  TEST    tests/qapi-schema/bad-if-empty.out
  TEST    tests/qapi-schema/bad-if-empty-list.out
  TEST    tests/qapi-schema/bad-if-list.out
  TEST    tests/qapi-schema/bad-type-bool.out
  TEST    tests/qapi-schema/bad-type-dict.out
  TEST    tests/qapi-schema/bad-type-int.out
  TEST    tests/qapi-schema/base-cycle-direct.out
  TEST    tests/qapi-schema/base-cycle-indirect.out
  TEST    tests/qapi-schema/command-int.out
  TEST    tests/qapi-schema/comments.out
  TEST    tests/qapi-schema/doc-bad-alternate-member.out
  TEST    tests/qapi-schema/doc-bad-command-arg.out
  TEST    tests/qapi-schema/doc-bad-section.out
  TEST    tests/qapi-schema/doc-bad-symbol.out
  TEST    tests/qapi-schema/doc-bad-union-member.out
  TEST    tests/qapi-schema/doc-before-include.out
  TEST    tests/qapi-schema/doc-before-pragma.out
  TEST    tests/qapi-schema/doc-duplicated-arg.out
  TEST    tests/qapi-schema/doc-duplicated-return.out
  TEST    tests/qapi-schema/doc-duplicated-since.out
  TEST    tests/qapi-schema/doc-empty-section.out
  TEST    tests/qapi-schema/doc-empty-arg.out
  TEST    tests/qapi-schema/doc-empty-symbol.out
  TEST    tests/qapi-schema/doc-good.out
  TEST    tests/qapi-schema/doc-interleaved-section.out
  TEST    tests/qapi-schema/doc-invalid-end.out
  TEST    tests/qapi-schema/doc-invalid-end2.out
  TEST    tests/qapi-schema/doc-invalid-return.out
  TEST    tests/qapi-schema/doc-invalid-section.out
  TEST    tests/qapi-schema/doc-invalid-start.out
  TEST    tests/qapi-schema/doc-missing-colon.out
  TEST    tests/qapi-schema/doc-missing-expr.out
  TEST    tests/qapi-schema/doc-missing-space.out
  TEST    tests/qapi-schema/doc-missing.out
  TEST    tests/qapi-schema/doc-no-symbol.out
  TEST    tests/qapi-schema/double-data.out
  TEST    tests/qapi-schema/double-type.out
  TEST    tests/qapi-schema/duplicate-key.out
  TEST    tests/qapi-schema/empty.out
  TEST    tests/qapi-schema/enum-bad-name.out
  TEST    tests/qapi-schema/enum-bad-prefix.out
  TEST    tests/qapi-schema/enum-clash-member.out
  TEST    tests/qapi-schema/enum-dict-member.out
  TEST    tests/qapi-schema/enum-int-member.out
  TEST    tests/qapi-schema/enum-member-case.out
  TEST    tests/qapi-schema/enum-missing-data.out
  TEST    tests/qapi-schema/enum-wrong-data.out
  TEST    tests/qapi-schema/escape-outside-string.out
  TEST    tests/qapi-schema/escape-too-big.out
  TEST    tests/qapi-schema/escape-too-short.out
  TEST    tests/qapi-schema/event-boxed-empty.out
  TEST    tests/qapi-schema/event-case.out
  TEST    tests/qapi-schema/event-nest-struct.out
  TEST    tests/qapi-schema/flat-union-array-branch.out
  TEST    tests/qapi-schema/flat-union-bad-base.out
  TEST    tests/qapi-schema/flat-union-bad-discriminator.out
  TEST    tests/qapi-schema/flat-union-base-any.out
  TEST    tests/qapi-schema/flat-union-base-union.out
  TEST    tests/qapi-schema/flat-union-empty.out
  TEST    tests/qapi-schema/flat-union-clash-member.out
  TEST    tests/qapi-schema/flat-union-inline.out
  TEST    tests/qapi-schema/flat-union-int-branch.out
  TEST    tests/qapi-schema/flat-union-invalid-branch-key.out
  TEST    tests/qapi-schema/flat-union-invalid-discriminator.out
  TEST    tests/qapi-schema/flat-union-no-base.out
  TEST    tests/qapi-schema/flat-union-optional-discriminator.out
  TEST    tests/qapi-schema/flat-union-string-discriminator.out
  TEST    tests/qapi-schema/funny-char.out
  TEST    tests/qapi-schema/ident-with-escape.out
  TEST    tests/qapi-schema/include-before-err.out
  TEST    tests/qapi-schema/include-cycle.out
  TEST    tests/qapi-schema/include-extra-junk.out
  TEST    tests/qapi-schema/include-format-err.out
  TEST    tests/qapi-schema/include-nested-err.out
  TEST    tests/qapi-schema/include-no-file.out
  TEST    tests/qapi-schema/include-non-file.out
  TEST    tests/qapi-schema/include-relpath.out
  TEST    tests/qapi-schema/include-repetition.out
  TEST    tests/qapi-schema/include-self-cycle.out
  TEST    tests/qapi-schema/include-simple.out
  TEST    tests/qapi-schema/indented-expr.out
  TEST    tests/qapi-schema/leading-comma-list.out
  TEST    tests/qapi-schema/leading-comma-object.out
  TEST    tests/qapi-schema/missing-colon.out
  TEST    tests/qapi-schema/missing-comma-list.out
  TEST    tests/qapi-schema/missing-comma-object.out
  TEST    tests/qapi-schema/missing-type.out
  TEST    tests/qapi-schema/nested-struct-data.out
  TEST    tests/qapi-schema/non-objects.out
  TEST    tests/qapi-schema/oob-test.out
  TEST    tests/qapi-schema/allow-preconfig-test.out
  TEST    tests/qapi-schema/pragma-doc-required-crap.out
  TEST    tests/qapi-schema/pragma-extra-junk.out
  TEST    tests/qapi-schema/pragma-name-case-whitelist-crap.out
  TEST    tests/qapi-schema/pragma-non-dict.out
  TEST    tests/qapi-schema/pragma-returns-whitelist-crap.out
  TEST    tests/qapi-schema/qapi-schema-test.out
  TEST    tests/qapi-schema/quoted-structural-chars.out
  TEST    tests/qapi-schema/redefined-builtin.out
  TEST    tests/qapi-schema/redefined-command.out
  TEST    tests/qapi-schema/redefined-event.out
  TEST    tests/qapi-schema/redefined-type.out
  TEST    tests/qapi-schema/reserved-command-q.out
  TEST    tests/qapi-schema/reserved-enum-q.out
  TEST    tests/qapi-schema/reserved-member-has.out
  TEST    tests/qapi-schema/reserved-member-q.out
  TEST    tests/qapi-schema/reserved-member-u.out
  TEST    tests/qapi-schema/reserved-member-underscore.out
  TEST    tests/qapi-schema/reserved-type-kind.out
  TEST    tests/qapi-schema/reserved-type-list.out
  TEST    tests/qapi-schema/returns-alternate.out
  TEST    tests/qapi-schema/returns-array-bad.out
  TEST    tests/qapi-schema/returns-dict.out
  TEST    tests/qapi-schema/returns-unknown.out
  TEST    tests/qapi-schema/returns-whitelist.out
  TEST    tests/qapi-schema/struct-base-clash-deep.out
  TEST    tests/qapi-schema/struct-base-clash.out
  TEST    tests/qapi-schema/struct-data-invalid.out
  TEST    tests/qapi-schema/struct-member-invalid.out
  TEST    tests/qapi-schema/trailing-comma-list.out
  TEST    tests/qapi-schema/trailing-comma-object.out
  TEST    tests/qapi-schema/type-bypass-bad-gen.out
  TEST    tests/qapi-schema/unclosed-list.out
  TEST    tests/qapi-schema/unclosed-object.out
  TEST    tests/qapi-schema/unclosed-string.out
  TEST    tests/qapi-schema/unicode-str.out
  TEST    tests/qapi-schema/union-base-empty.out
  TEST    tests/qapi-schema/union-base-no-discriminator.out
  TEST    tests/qapi-schema/union-branch-case.out
  TEST    tests/qapi-schema/union-empty.out
  TEST    tests/qapi-schema/union-clash-branches.out
  TEST    tests/qapi-schema/union-invalid-base.out
  TEST    tests/qapi-schema/union-optional-branch.out
  TEST    tests/qapi-schema/union-unknown.out
  TEST    tests/qapi-schema/unknown-escape.out
  TEST    tests/qapi-schema/unknown-expr-key.out
  GEN     tests/qapi-schema/doc-good.test.texi
  CC      tests/check-qdict.o
  CC      tests/check-block-qdict.o
  CC      tests/test-char.o
  CC      tests/check-qnum.o
  CC      tests/check-qstring.o
  CC      tests/check-qlist.o
  CC      tests/check-qnull.o
  CC      tests/check-qobject.o
  CC      tests/check-qjson.o
  CC      tests/check-qlit.o
  CC      tests/test-qobject-output-visitor.o
  CC      tests/test-qapi-visit.o
  CC      tests/test-qapi-types.o
  CC      tests/test-qapi-events.o
  CC      tests/test-qapi-introspect.o
  CC      tests/test-clone-visitor.o
  CC      tests/test-qobject-input-visitor.o
  CC      tests/test-qapi-commands.o
  CC      tests/test-qmp-cmds.o
  CC      tests/test-string-input-visitor.o
  CC      tests/test-string-output-visitor.o
  CC      tests/test-qmp-event.o
  CC      tests/test-opts-visitor.o
  CC      tests/test-coroutine.o
  CC      tests/iothread.o
  CC      tests/test-visitor-serialization.o
  CC      tests/test-iov.o
  CC      tests/test-aio.o
  CC      tests/test-aio-multithread.o
  CC      tests/test-throttle.o
  CC      tests/test-thread-pool.o
  CC      tests/test-hbitmap.o
  CC      tests/test-bdrv-drain.o
  CC      tests/test-blockjob.o
  CC      tests/test-blockjob-txn.o
  CC      tests/test-block-backend.o
  CC      tests/test-x86-cpuid.o
  CC      tests/test-xbzrle.o
  CC      tests/test-vmstate.o
  CC      tests/test-cutils.o
  CC      tests/test-shift128.o
  CC      tests/test-mul64.o
  CC      tests/test-int128.o
  CC      tests/rcutorture.o
  CC      tests/test-rcu-list.o
  CC      tests/test-rcu-simpleq.o
  CC      tests/test-rcu-tailq.o
  CC      tests/test-qdist.o
  CC      tests/test-qht.o
  CC      tests/test-qht-par.o
  CC      tests/qht-bench.o
  CC      tests/test-bitops.o
  CC      tests/test-bitcnt.o
  CC      tests/test-qdev-global-props.o
  CC      tests/check-qom-interface.o
  CC      tests/test-qemu-opts.o
  CC      tests/check-qom-proplist.o
  CC      tests/test-keyval.o
  CC      tests/test-write-threshold.o
  CC      tests/test-crypto-hash.o
  CC      tests/test-crypto-hmac.o
  CC      tests/test-crypto-cipher.o
  CC      tests/test-crypto-secret.o
  CC      tests/test-qga.o
  CC      tests/libqtest.o
  CC      tests/test-timed-average.o
  CC      tests/test-util-sockets.o
  CC      tests/socket-helpers.o
  CC      tests/test-io-task.o
  CC      tests/test-io-channel-socket.o
  CC      tests/io-channel-helpers.o
  CC      tests/test-io-channel-file.o
  CC      tests/test-io-channel-command.o
  CC      tests/test-io-channel-buffer.o
  CC      tests/test-base64.o
  CC      tests/test-crypto-pbkdf.o
  CC      tests/test-crypto-ivgen.o
  CC      tests/test-crypto-afsplit.o
  CC      tests/test-crypto-xts.o
  CC      tests/test-crypto-block.o
  CC      tests/test-logging.o
  CC      tests/test-replication.o
  CC      tests/test-bufferiszero.o
  CC      tests/test-uuid.o
  CC      tests/ptimer-test.o
  CC      tests/ptimer-test-stubs.o
  CC      tests/test-qapi-util.o
  CC      tests/vhost-user-test.o
  CC      tests/libqos/pci.o
  CC      tests/libqos/fw_cfg.o
  CC      tests/libqos/malloc.o
  CC      tests/libqos/i2c.o
  CC      tests/libqos/libqos.o
  CC      tests/libqos/malloc-spapr.o
  CC      tests/libqos/libqos-spapr.o
  CC      tests/libqos/rtas.o
  CC      tests/libqos/pci-spapr.o
  CC      tests/libqos/pci-pc.o
  CC      tests/libqos/malloc-pc.o
  CC      tests/libqos/libqos-pc.o
  CC      tests/libqos/ahci.o
  CC      tests/libqos/virtio.o
  CC      tests/libqos/virtio-pci.o
  CC      tests/libqos/virtio-mmio.o
  CC      tests/libqos/malloc-generic.o
  CC      tests/endianness-test.o
  CC      tests/fdc-test.o
  CC      tests/ide-test.o
  CC      tests/ahci-test.o
  CC      tests/hd-geo-test.o
  CC      tests/boot-order-test.o
  CC      tests/bios-tables-test.o
  CC      tests/boot-sector.o
  CC      tests/acpi-utils.o
  CC      tests/boot-serial-test.o
  CC      tests/pxe-test.o
  CC      tests/rtc-test.o
  CC      tests/ipmi-kcs-test.o
  CC      tests/ipmi-bt-test.o
  CC      tests/i440fx-test.o
  CC      tests/fw_cfg-test.o
  CC      tests/drive_del-test.o
  CC      tests/wdt_ib700-test.o
  CC      tests/tco-test.o
  CC      tests/e1000-test.o
  CC      tests/e1000e-test.o
  CC      tests/rtl8139-test.o
  CC      tests/pcnet-test.o
  CC      tests/eepro100-test.o
  CC      tests/ne2000-test.o
  CC      tests/nvme-test.o
  CC      tests/es1370-test.o
  CC      tests/ac97-test.o
  CC      tests/virtio-net-test.o
  CC      tests/virtio-balloon-test.o
  CC      tests/virtio-blk-test.o
  CC      tests/virtio-rng-test.o
  CC      tests/virtio-scsi-test.o
  CC      tests/virtio-console-test.o
  CC      tests/virtio-serial-test.o
  CC      tests/tpci200-test.o
  CC      tests/ipoctal232-test.o
  CC      tests/intel-hda-test.o
  CC      tests/display-vga-test.o
  CC      tests/ivshmem-test.o
  CC      tests/megasas-test.o
  CC      tests/vmxnet3-test.o
  CC      tests/pvpanic-test.o
  CC      tests/i82801b11-test.o
  CC      tests/ioh3420-test.o
  CC      tests/usb-hcd-ohci-test.o
  CC      tests/libqos/usb.o
  CC      tests/usb-hcd-uhci-test.o
  CC      tests/usb-hcd-xhci-test.o
  CC      tests/cpu-plug-test.o
  CC      tests/q35-test.o
  CC      tests/vmgenid-test.o
  CC      tests/tpm-crb-swtpm-test.o
  CC      tests/tpm-emu.o
  CC      tests/tpm-util.o
  CC      tests/tpm-tests.o
  CC      tests/tpm-crb-test.o
  CC      tests/tpm-tis-swtpm-test.o
  CC      tests/tpm-tis-test.o
  CC      tests/test-netfilter.o
  CC      tests/test-filter-mirror.o
  CC      tests/test-filter-redirector.o
  CC      tests/migration-test.o
  CC      tests/test-x86-cpuid-compat.o
  CC      tests/numa-test.o
  CC      tests/sdhci-test.o
  CC      tests/qmp-test.o
  CC      tests/qmp-cmd-test.o
  CC      tests/device-introspect-test.o
  CC      tests/cdrom-test.o
  CC      tests/machine-none-test.o
  CC      tests/qom-test.o
  CC      tests/test-hmp.o
  TEST    decodetree.py
  LINK    tests/check-qdict
  LINK    tests/check-block-qdict
  LINK    tests/test-char
  LINK    tests/check-qnum
  LINK    tests/check-qstring
  LINK    tests/check-qlist
  LINK    tests/check-qnull
  LINK    tests/check-qobject
  LINK    tests/check-qjson
  LINK    tests/check-qlit
  LINK    tests/test-qobject-output-visitor
  LINK    tests/test-clone-visitor
  LINK    tests/test-qobject-input-visitor
  LINK    tests/test-qmp-cmds
  LINK    tests/test-string-input-visitor
  LINK    tests/test-string-output-visitor
  LINK    tests/test-qmp-event
  LINK    tests/test-opts-visitor
  LINK    tests/test-coroutine
  LINK    tests/test-visitor-serialization
  LINK    tests/test-iov
  LINK    tests/test-aio
  LINK    tests/test-aio-multithread
  LINK    tests/test-throttle
  LINK    tests/test-thread-pool
  LINK    tests/test-hbitmap
  LINK    tests/test-bdrv-drain
  LINK    tests/test-blockjob
  LINK    tests/test-blockjob-txn
  LINK    tests/test-block-backend
  LINK    tests/test-x86-cpuid
  LINK    tests/test-xbzrle
  LINK    tests/test-vmstate
  LINK    tests/test-cutils
  LINK    tests/test-shift128
  LINK    tests/test-mul64
  LINK    tests/test-int128
  LINK    tests/rcutorture
  LINK    tests/test-rcu-list
  LINK    tests/test-rcu-simpleq
  LINK    tests/test-rcu-tailq
  LINK    tests/test-qdist
  LINK    tests/test-qht
  LINK    tests/qht-bench
  LINK    tests/test-bitops
  LINK    tests/test-bitcnt
  LINK    tests/test-qdev-global-props
  LINK    tests/check-qom-interface
  LINK    tests/check-qom-proplist
  LINK    tests/test-qemu-opts
  LINK    tests/test-keyval
  LINK    tests/test-write-threshold
  LINK    tests/test-crypto-hash
  LINK    tests/test-crypto-hmac
  LINK    tests/test-crypto-cipher
  LINK    tests/test-crypto-secret
  LINK    tests/test-qga
  LINK    tests/test-timed-average
  LINK    tests/test-util-sockets
  LINK    tests/test-io-task
  LINK    tests/test-io-channel-socket
  LINK    tests/test-io-channel-file
  LINK    tests/test-io-channel-command
  LINK    tests/test-io-channel-buffer
  LINK    tests/test-base64
  LINK    tests/test-crypto-pbkdf
  LINK    tests/test-crypto-ivgen
  LINK    tests/test-crypto-afsplit
  LINK    tests/test-crypto-xts
  LINK    tests/test-crypto-block
  LINK    tests/test-logging
  LINK    tests/test-replication
  LINK    tests/test-bufferiszero
  LINK    tests/test-uuid
  LINK    tests/ptimer-test
  LINK    tests/test-qapi-util
  LINK    tests/vhost-user-test
  LINK    tests/endianness-test
  LINK    tests/fdc-test
  LINK    tests/ide-test
  LINK    tests/ahci-test
  LINK    tests/hd-geo-test
  LINK    tests/boot-order-test
  LINK    tests/bios-tables-test
  LINK    tests/boot-serial-test
  LINK    tests/pxe-test
  LINK    tests/rtc-test
  LINK    tests/ipmi-kcs-test
  LINK    tests/ipmi-bt-test
  LINK    tests/i440fx-test
  LINK    tests/fw_cfg-test
  LINK    tests/drive_del-test
  LINK    tests/wdt_ib700-test
  LINK    tests/tco-test
  LINK    tests/e1000-test
  LINK    tests/e1000e-test
  LINK    tests/rtl8139-test
  LINK    tests/pcnet-test
  LINK    tests/eepro100-test
  LINK    tests/ne2000-test
  LINK    tests/nvme-test
  LINK    tests/ac97-test
  LINK    tests/es1370-test
  LINK    tests/virtio-net-test
  LINK    tests/virtio-balloon-test
  LINK    tests/virtio-blk-test
  LINK    tests/virtio-rng-test
  LINK    tests/virtio-scsi-test
  LINK    tests/virtio-serial-test
  LINK    tests/virtio-console-test
  LINK    tests/tpci200-test
  LINK    tests/ipoctal232-test
  LINK    tests/display-vga-test
  LINK    tests/intel-hda-test
  LINK    tests/ivshmem-test
  LINK    tests/megasas-test
  LINK    tests/vmxnet3-test
  LINK    tests/pvpanic-test
  LINK    tests/i82801b11-test
  LINK    tests/ioh3420-test
  LINK    tests/usb-hcd-ohci-test
  LINK    tests/usb-hcd-uhci-test
  LINK    tests/usb-hcd-xhci-test
  LINK    tests/cpu-plug-test
  LINK    tests/q35-test
  LINK    tests/vmgenid-test
  LINK    tests/tpm-crb-swtpm-test
  LINK    tests/tpm-crb-test
  LINK    tests/tpm-tis-swtpm-test
  LINK    tests/tpm-tis-test
  LINK    tests/test-netfilter
  LINK    tests/test-filter-mirror
  LINK    tests/test-filter-redirector
  LINK    tests/migration-test
  LINK    tests/test-x86-cpuid-compat
  LINK    tests/numa-test
  LINK    tests/sdhci-test
  LINK    tests/qmp-test
  LINK    tests/qmp-cmd-test
  LINK    tests/device-introspect-test
  LINK    tests/cdrom-test
  LINK    tests/machine-none-test
  LINK    tests/qom-test
  LINK    tests/test-hmp

GTESTER tests/check-qdict
GTESTER tests/test-char
GTESTER tests/check-qstring
GTESTER tests/check-block-qdict
GTESTER tests/check-qnum
GTESTER tests/check-qlist
GTESTER tests/check-qnull
GTESTER tests/check-qobject
GTESTER tests/test-qobject-output-visitor
GTESTER tests/test-clone-visitor
GTESTER tests/check-qjson
GTESTER tests/check-qlit
GTESTER tests/test-qobject-input-visitor
GTESTER tests/test-qmp-cmds
GTESTER tests/test-string-input-visitor
GTESTER tests/test-qmp-event
GTESTER tests/test-string-output-visitor
GTESTER tests/test-opts-visitor
GTESTER tests/test-coroutine
GTESTER tests/test-visitor-serialization
GTESTER tests/test-iov
GTESTER tests/test-aio
GTESTER tests/test-aio-multithread
GTESTER tests/test-throttle
GTESTER tests/test-thread-pool
GTESTER tests/test-hbitmap
GTESTER tests/test-bdrv-drain
GTESTER tests/test-blockjob
GTESTER tests/test-blockjob-txn
GTESTER tests/test-block-backend
GTESTER tests/test-x86-cpuid
GTESTER tests/test-xbzrle
GTESTER tests/test-vmstate
GTESTER tests/test-cutils
GTESTER tests/test-shift128
GTESTER tests/test-mul64
GTESTER tests/test-int128
GTESTER tests/rcutorture
GTESTER tests/test-rcu-list
GTESTER tests/test-rcu-simpleq
GTESTER tests/test-rcu-tailq
GTESTER tests/test-qdist
GTESTER tests/test-qht
LINK tests/test-qht-par
GTESTER tests/test-bitops
GTESTER tests/test-bitcnt
GTESTER tests/test-qdev-global-props
GTESTER tests/check-qom-interface
GTESTER tests/check-qom-proplist
GTESTER tests/test-qemu-opts
GTESTER tests/test-keyval
GTESTER tests/test-write-threshold
GTESTER tests/test-crypto-hash
GTESTER tests/test-crypto-hmac
GTESTER tests/test-crypto-cipher
GTESTER tests/test-crypto-secret
GTESTER tests/test-qga
GTESTER tests/test-timed-average
GTESTER tests/test-util-sockets
GTESTER tests/test-io-task
GTESTER tests/test-io-channel-socket
GTESTER tests/test-io-channel-file
GTESTER tests/test-io-channel-command
GTESTER tests/test-io-channel-buffer
GTESTER tests/test-base64
GTESTER tests/test-crypto-pbkdf
GTESTER tests/test-crypto-ivgen
GTESTER tests/test-crypto-afsplit
GTESTER tests/test-crypto-xts
GTESTER tests/test-crypto-block
GTESTER tests/test-logging
GTESTER tests/test-replication
GTESTER tests/test-bufferiszero
GTESTER tests/test-uuid
GTESTER tests/ptimer-test
GTESTER tests/test-qapi-util
GTESTER check-qtest-x86_64
GTESTER check-qtest-aarch64
GTESTER tests/test-qht-par
Broken pipe
/tmp/qemu-test/src/tests/libqtest.c:125: kill_qemu() detected QEMU death from signal 11 (Segmentation fault) (core dumped)
GTester: last random seed: R02Sa319f44c059771b5ebd17f8a7060a8c8
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
swtpm not in PATH or missing --tpm2 support; swtpm not in PATH or missing --tpm2 support; swtpm not in PATH or missing --tpm2 support; swtpm not in PATH or missing --tpm2 support; Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
make: *** [check-qtest-aarch64] Error 1
make: *** Waiting for unfinished jobs....
Traceback (most recent call last):
File "./tests/docker/docker.py", line 563, in <module>

    sys.exit(main())

File "./tests/docker/docker.py", line 560, in main
return args.cmdobj.run(args, argv)
File "./tests/docker/docker.py", line 306, in run
return Docker().run(argv, args.keep, quiet=args.quiet)
File "./tests/docker/docker.py", line 274, in run
quiet=quiet)
File "./tests/docker/docker.py", line 181, in _do_check
return subprocess.check_call(self._command + cmd, **kwargs)
File "/usr/lib64/python2.7/subprocess.py", line 186, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', '--label', 'com.qemu.instance.uuid=94b4f02ce1a011e8a04752540069c830', '-u', '1000', '--security-opt', 'seccomp=unconfined', '--rm', '--net=none', '-e', 'TARGET_LIST=', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=8', '-e', 'DEBUG=', '-e', 'SHOW_ENV=1', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/home/patchew/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-_16qprbf/src/docker-src.2018-11-06-03.47.10.29427:/var/tmp/qemu:z,ro', 'qemu:centos7', '/var/tmp/qemu/run', 'test-quick']' returned non-zero exit status 2 make[1]: *** [tests/docker/Makefile.include:217: docker-run] Error 1
make[1]: Leaving directory '/var/tmp/patchew-tester-tmp-_16qprbf/src'
make: *** [tests/docker/Makefile.include:251: docker-run-test-quick@centos7] Error 2

real 8m26.315s
user 0m5.541s
sys 0m4.302s
=== OUTPUT END ===

Test command exited with code: 2

---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to [email protected]