Skip to contentSkip to conversation

Add make check tests for Migration

PATCH Superseded Juan Quintela 4 participants 9 messages Nov 28, 2018 – Nov 29, 2018

v10 of 14 Superseded Latest is v14 →

lore
Share & tools
lore
#0 lore raw

v10 cover Add make check tests for Migration

Hi

In v10:
- rebase to latest upstream
- code changed quite a bit with qmp refactorings apllied them
- make it work again
- compress threads test, continue working there, not trivial.

Two question-:
- should we integrate them on this cycle?
they are tests
- should we enable them only on baremetal, and not on emulation? There is still a problem on TCG that sometimes fails the migration thread

ToDo:
- Finish debug compress test
Still stuck why the test wonk when I launch qemu by hand but not trough qtest. Creatuve uses of launching gdb through launched guests have not help so far.

- Finish fd transport test
Not very difficult in principle, need more checking to see if it don't fail in other setups.

- Finish tl trasport test
I already knew that I hate certificates, but this is too much. Trying to understand how to use them.

Please commet, Juan.

In v9:
- Dropp Export SocketAddress_to_str
just create the functions where I need them.
- drop precopy test and xbzrle (on pull requset)
Use 100M for cache as dave suggests
- drop ppc improvemnet (on pull request)
- drop RFH, will work on tha later
- move socket_address to info migrate

Please, review.

Later, Juan.

v8:
- just rebase to make things continue to wonk

New in the other v7:
- SocketAddress is now a list (a.k.a make happy danp)
- Rebase on top of upstream
network listener is *interesting*
- *HACK* to make SocketAddress list in common see patch: create-socket-paramenter

Please review, Juan.

[v7]
This is v6, it differest from the patches that I sent with previous multifd post:
- Rename x-tcp-port to x-socket-address
This is more *complicated* that it looks as:

* it is a pointer, so I need to use QAPI_CLONE() to make info migrate work

* this is an union of structs. In QAPI. So, a dict of strings. The only way that I was able to make things work is parsing the qdict to a SocketAddress and then output a SocketAddress as an str. It needs to be an easier way, for sure.

* Cleanups here andthere.

Please, review, Juan.

[v5]
- Several patches moved to pull request
- merge info_migrate and migration_tests
only missing bit is tcp_port, needed for tcp tests
- Rename tcp-port to x-tcp-port
We will get better naming from David at some point, and we will use that bit
- ppc: use inline code as suggested by lvivier

Please, review.

It is based on my previous pull request

Based-on: [email protected]

[v4]
- rebase on top on v4 info_migrate patches
- Tune sleeps to make patches fast
- Create a deprecated test for deprecated commands (i.e. make peterxu happy)
- create migrate_start_postcopy function
- fix naming/sizes between power and x86
- cleanup comments to match code

[v3]

- No more tests for deprecated parameters. Now I only use migrate_set_parameter. If there is a deprecated command for that, we tests it there.
- free "result" string, always good to return memory (Peter found it)
- use the new tcp_port parameter from info migrate. So we are handling well the tcp case.
- lots of code movement around to make everything consistent.
- Several patches already integrated upstream.

[v2]
- to make review easier, I started renaming postcopy-test.c to migration-test.c
- Did cleanups/refactoring there
- Don't use global-qtest anymore
- check that the parameters that we sent got really set
- RFH: comrpress threads tests is not working for some weird reason. Using the same code on command line works. still investigating why.

ToDoo:

- tcp: after discussions with dave, we ended in conclusion that we need to use the 0 port and let the system gives us a free one

But .... that means that we need to be able to get that port back somehow. "info migrate" woring on destination side?

- compression threads. There is some weird interaction with the test hardness and every migration thread get waiting in a different semaphore. Investigating if it is a race/bug/whateverr

- deprecated commands: There was a suggestion to make migrate_set_parameter look at the parameter name and test old/new depending on something. Not sure what to do here.

- testing commands: Is there a way to launch qemu and just sent qmp/hmp commands without having to really run anything else?

[v1]
- add test for precopy for unix/tcp
exec and fd to came, don't know how to test rdma without hardware
- add tests using deprecated interfaces
- add test for xbzrle
Note to myself, there is no way to set the cache size with migraton_set_parameters
- Add test for compress threads
disabled on the series, right now it appears that compression is not working at all
- Move postcopy to use new results
Idea is to move it on top of migration-test.c, but first I want some reviews on basic idea

Juan Quintela (5):
tests: Add migration xbzrle test
migration: Create socket-address parameter
tests: Add basic migration precopy tcp test
tests: Add migration multifd test
[RFH] tests: Add migration compress threads tests

 hmp.c                  |  31 +++++
 migration/migration.c  |  24 ++++
 migration/migration.h  |   4 +
 migration/socket.c     |  11 ++
 qapi/migration.json    |   6 +-
 qapi/sockets.json      |  13 ++
 tests/migration-test.c | 275 ++++++++++++++++++++++++++++++++++++++++-
 7 files changed, 358 insertions(+), 6 deletions(-)
Signature · 1 line
2.19.1
#1 lore raw

PATCH v10 1/5 tests: Add migration xbzrle test

---
 tests/migration-test.c | 63 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)
tests/migration-test.c +63 -0
index 06ca5068d8..d18e9b3709 100644
@@ -584,6 +584,17 @@ static void deprecated_set_speed(QTestState *who, long long value)
     migrate_check_parameter(who, "max-bandwidth", value);
 }
 
+static void deprecated_set_cache_size(QTestState *who, long long value)
+{
+    QDict *rsp;
+
+    rsp = qtest_qmp(who, "{ 'execute': 'migrate-set-cache-size',"
+                         "'arguments': { 'value': %lld } }", value);
+    g_assert(qdict_haskey(rsp, "return"));
+    qobject_unref(rsp);
+    migrate_check_parameter(who, "xbzrle-cache-size", value);
+}
+
 static void test_deprecated(void)
 {
     QTestState *from;
@@ -592,6 +603,7 @@ static void test_deprecated(void)
 
     deprecated_set_downtime(from, 0.12345);
     deprecated_set_speed(from, 12345);
+    deprecated_set_cache_size(from, 4096);
 
     qtest_quit(from);
 }
@@ -781,6 +793,56 @@ static void test_precopy_unix(void)
     g_free(uri);
 }
 
+static void test_xbzrle(const char *uri)
+{
+    QTestState *from, *to;
+
+    if (test_migrate_start(&from, &to, uri, false)) {
+        return;
+    }
+
+    /* We want to pick a speed slow enough that the test completes
+     * quickly, but that it doesn't complete precopy even on a slow
+     * machine, so also set the downtime.
+     */
+    /* 1 ms should make it not converge*/
+    migrate_set_parameter(from, "downtime-limit", 1);
+    /* 1GB/s */
+    migrate_set_parameter(from, "max-bandwidth", 1000000000);
+
+    migrate_set_parameter(from, "xbzrle-cache-size", 33554432);
+
+    migrate_set_capability(from, "xbzrle", "true");
+    migrate_set_capability(to, "xbzrle", "true");
+    /* Wait for the first serial output from the source */
+    wait_for_serial("src_serial");
+
+    migrate(from, uri, "{}");
+
+    wait_for_migration_pass(from);
+
+    /* 300ms should converge */
+    migrate_set_parameter(from, "downtime-limit", 300);
+
+    if (!got_stop) {
+        qtest_qmp_eventwait(from, "STOP");
+    }
+    qtest_qmp_eventwait(to, "RESUME");
+
+    wait_for_serial("dest_serial");
+    wait_for_migration_complete(from);
+
+    test_migrate_end(from, to, true);
+}
+
+static void test_xbzrle_unix(void)
+{
+    char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs);
+
+    test_xbzrle(uri);
+    g_free(uri);
+}
+
 int main(int argc, char **argv)
 {
     char template[] = "/tmp/migration-test-XXXXXX";
@@ -832,6 +894,7 @@ int main(int argc, char **argv)
     qtest_add_func("/migration/deprecated", test_deprecated);
     qtest_add_func("/migration/bad_dest", test_baddest);
     qtest_add_func("/migration/precopy/unix", test_precopy_unix);
+    qtest_add_func("/migration/xbzrle/unix", test_xbzrle_unix);
 
     ret = g_test_run();
 
Signature · 1 line
2.19.1
#2 lore raw

PATCH v10 2/5 migration: Create socket-address parameter

In reply to Juan Quintela

It will be used to store the uri parameters. We want this only for tcp, so we don't set it for other uris. We need it to know what port is migration running.

--

This used to be uri parameter, but it has so many troubles to reproduce that it don't just make sense.

This used to be a port parameter. I was asked to move to SocketAddress, done.
I also merged the setting of the migration tcp port in this one because now I need to free the address, and this makes it easier. This used to be x-socket-address with a single direction, now it is a list of addresses.
Move SocketAddress_to_str here. I used to try to generalize the one in chardev/char-socket.c, but it is not worth it.

---
 hmp.c                 | 31 +++++++++++++++++++++++++++++++
 migration/migration.c | 24 ++++++++++++++++++++++++
 migration/migration.h |  4 ++++
 migration/socket.c    | 11 +++++++++++
 qapi/migration.json   |  6 +++++-
 qapi/sockets.json     | 13 +++++++++++++
 6 files changed, 88 insertions(+), 1 deletion(-)
hmp.c +31 -0
index 7828f93a39..2fd12a4a81 100644
@@ -166,6 +166,26 @@ void hmp_info_mice(Monitor *mon, const QDict *qdict)
     qapi_free_MouseInfoList(mice_list);
 }
 
+static char *SocketAddress_to_str(SocketAddress *addr)
+{
+    switch (addr->type) {
+    case SOCKET_ADDRESS_TYPE_INET:
+        return g_strdup_printf("tcp:%s:%s",
+                               addr->u.inet.host,
+                               addr->u.inet.port);
+        break;
+    case SOCKET_ADDRESS_TYPE_UNIX:
+        return g_strdup_printf("unix:%s",
+                               addr->u.q_unix.path);
+        break;
+    case SOCKET_ADDRESS_TYPE_FD:
+        return g_strdup_printf("fd:%s", addr->u.fd.str);
+        break;
+    default:
+        abort();
+    }
+}
+
 void hmp_info_migrate(Monitor *mon, const QDict *qdict)
 {
     MigrationInfo *info;
@@ -304,6 +324,17 @@ void hmp_info_migrate(Monitor *mon, const QDict *qdict)
         g_free(str);
         visit_free(v);
     }
+    if (info->has_socket_address) {
+        SocketAddressList *addr;
+
+        monitor_printf(mon, "socket address: [\n");
+
+        for (addr = info->socket_address; addr; addr = addr->next) {
+            char *s = SocketAddress_to_str(addr->value);
+            monitor_printf(mon, "\t%s\n", s);
+        }
+        monitor_printf(mon, "]\n");
+    }
     qapi_free_MigrationInfo(info);
     qapi_free_MigrationCapabilityStatusList(caps);
 }
migration/migration.c +24 -0
index 49ffb9997a..22954dcabc 100644
@@ -31,6 +31,8 @@
 #include "migration/vmstate.h"
 #include "block/block.h"
 #include "qapi/error.h"
+#include "qapi/clone-visitor.h"
+#include "qapi/qapi-visit-sockets.h"
 #include "qapi/qapi-commands-migration.h"
 #include "qapi/qapi-events-migration.h"
 #include "qapi/qmp/qerror.h"
@@ -197,6 +199,11 @@ void migration_incoming_state_destroy(void)
     }
 
     qemu_event_reset(&mis->main_thread_load_event);
+
+    if (mis->socket_address) {
+        qapi_free_SocketAddressList(mis->socket_address);
+        mis->socket_address = NULL;
+    }
 }
 
 static void migrate_generate_event(int new_state)
@@ -312,6 +319,17 @@ void migration_incoming_enable_colo(void)
     migration_colo_enabled = true;
 }
 
+void migrate_add_address(SocketAddress *address)
+{
+    MigrationIncomingState *mis = migration_incoming_get_current();
+    SocketAddressList *addrs;
+
+    addrs = g_new0(SocketAddressList, 1);
+    addrs->next = mis->socket_address;
+    mis->socket_address = addrs;
+    addrs->value = QAPI_CLONE(SocketAddress, address);
+}
+
 void qemu_start_incoming_migration(const char *uri, Error **errp)
 {
     const char *p;
@@ -960,6 +978,12 @@ static void fill_destination_migration_info(MigrationInfo *info)
 {
     MigrationIncomingState *mis = migration_incoming_get_current();
 
+    if (mis->socket_address) {
+        info->has_socket_address = true;
+        info->socket_address =
+            QAPI_CLONE(SocketAddressList, mis->socket_address);
+    }
+
     switch (mis->state) {
     case MIGRATION_STATUS_NONE:
         return;
migration/migration.h +4 -0
index e413d4d8b6..324970433c 100644
@@ -80,6 +80,9 @@ struct MigrationIncomingState {
     bool postcopy_recover_triggered;
     QemuSemaphore postcopy_pause_sem_dst;
     QemuSemaphore postcopy_pause_sem_fault;
+
+    /* List of listening socket addresses  */
+    SocketAddressList *socket_address;
 };
 
 MigrationIncomingState *migration_incoming_get_current(void);
@@ -292,6 +295,7 @@ void migrate_send_rp_resume_ack(MigrationIncomingState *mis, uint32_t value);
 
 void dirty_bitmap_mig_before_vm_start(void);
 void init_dirty_bitmap_incoming_migration(void);
+void migrate_add_address(SocketAddress *address);
 
 #define qemu_ram_foreach_block \
   #warning "Use qemu_ram_foreach_block_migratable in migration code"
migration/socket.c +11 -0
index f4c8174400..239527fb1f 100644
@@ -15,6 +15,7 @@
  */
 
 #include "qemu/osdep.h"
+#include "qemu/cutils.h"
 
 #include "qemu-common.h"
 #include "qemu/error-report.h"
@@ -177,6 +178,7 @@ static void socket_start_incoming_migration(SocketAddress *saddr,
                                             Error **errp)
 {
     QIONetListener *listener = qio_net_listener_new();
+    size_t i;
 
     qio_net_listener_set_name(listener, "migration-socket-listener");
 
@@ -189,6 +191,15 @@ static void socket_start_incoming_migration(SocketAddress *saddr,
                                           socket_accept_incoming_migration,
                                           NULL, NULL,
                                           g_main_context_get_thread_default());
+
+    for (i = 0; i < listener->nsioc; i++)  {
+        SocketAddress *address =
+            qio_channel_socket_get_local_address(listener->sioc[i], errp);
+        if (!address) {
+            return;
+        }
+        migrate_add_address(address);
+    }
 }
 
 void tcp_start_incoming_migration(const char *host_port, Error **errp)
qapi/migration.json +5 -1
index 38d4c41d88..631949796d 100644
@@ -6,6 +6,7 @@
 ##
 
 { 'include': 'common.json' }
+{ 'include': 'sockets.json' }
 
 ##
 # @MigrationStats:
@@ -196,6 +197,8 @@
 # @compression: migration compression statistics, only returned if compression
 #           feature is on and status is 'active' or 'completed' (Since 3.1)
 #
+# @socket-address: Only used for tcp, to know what the real port is (Since 3.1)
+#
 # Since: 0.14.0
 ##
 { 'struct': 'MigrationInfo',
@@ -210,7 +213,8 @@
            '*error-desc': 'str',
            '*postcopy-blocktime' : 'uint32',
            '*postcopy-vcpu-blocktime': ['uint32'],
-           '*compression': 'CompressionStats'} }
+           '*compression': 'CompressionStats',
+           '*socket-address': ['SocketAddress'] } }
 
 ##
 # @query-migrate:
qapi/sockets.json +13 -0
index fc81d8d5e8..d7f77984af 100644
@@ -152,3 +152,16 @@
             'unix': 'UnixSocketAddress',
             'vsock': 'VsockSocketAddress',
             'fd': 'String' } }
+
+##
+# @DummyStruct:
+#
+# Both block-core and migration needs SocketAddressList
+# I am open to comments about how to share it
+#
+# @dummy-list: A dummy list
+#
+# Since: 3.1
+##
+{ 'struct': 'DummyStruct',
+  'data': { 'dummy-list': ['SocketAddress'] } }
Signature · 1 line
2.19.1
#3 lore raw

Re: [Qemu-devel] [PATCH v10 2/5] migration: Create socket-address parameter

Quoted 8 lines · Juan Quintela

It will be used to store the uri parameters. We want this only for tcp, so we don't set it for other uris. We need it to know what port is migration running.

--

That's not the typical --- separator that git-am would recognize.

Quoted 12 lines

This used to be uri parameter, but it has so many troubles to reproduce that it don't just make sense.

This used to be a port parameter. I was asked to move to SocketAddress, done.
I also merged the setting of the migration tcp port in this one because now I need to free the address, and this makes it easier. This used to be x-socket-address with a single direction, now it is a list of addresses.
Move SocketAddress_to_str here. I used to try to generalize the one in chardev/char-socket.c, but it is not worth it.

Quoted 1 line

the double S-o-b is odd, especially if the second one was intended to be stripped.

Quoted 10 lines

+++ b/qapi/migration.json

qapi/migration.json +1 -0
@@ -6,6 +6,7 @@
  ##
 
  { 'include': 'common.json' }
+{ 'include': 'sockets.json' }
 
  ##
  # @MigrationStats:

qapi/migration.json line 201

Quoted 5 lines
qapi/migration.json +2 -0
@@ -196,6 +197,8 @@
  # @compression: migration compression statistics, only returned if compression
  #           feature is on and status is 'active' or 'completed' (Since 3.1)
  #
+# @socket-address: Only used for tcp, to know what the real port is (Since 3.1)
+#

s/3.1/4.0/ now...

Quoted 8 lines
qapi/sockets.json +4 -0
+++ b/qapi/sockets.json
@@ -152,3 +152,16 @@
              'unix': 'UnixSocketAddress',
              'vsock': 'VsockSocketAddress',
              'fd': 'String' } }
+
+##
+# @DummyStruct:

qapi/sockets.json line 167

Quoted 10 lines
qapi/sockets.json +10 -0
+#
+# Both block-core and migration needs SocketAddressList
+# I am open to comments about how to share it
+#
+# @dummy-list: A dummy list
+#
+# Since: 3.1
+##
+{ 'struct': 'DummyStruct',
+  'data': { 'dummy-list': ['SocketAddress'] } }

We've had a couple of threads about this in the last couple of months; maybe it's time for a qapi generator patch where we add an optional 'gen-list':true marker to any struct that needs to have a list generated for C code even when no QMP command uses the list form.

Signature · 3 lines
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3266
Virtualization:  qemu.org | libvirt.org
#4 lore raw

Re: [Qemu-devel] [PATCH v10 2/5] migration: Create socket-address parameter

Eric Blake <[email protected]> writes:

[...]

Quoted 15 lines
Quoted 15 lines

+++ b/qapi/sockets.json

qapi/sockets.json +10 -0
@@ -152,3 +152,16 @@
              'unix': 'UnixSocketAddress',
              'vsock': 'VsockSocketAddress',
              'fd': 'String' } }
+
+##
+# @DummyStruct:
+#
+# Both block-core and migration needs SocketAddressList
+# I am open to comments about how to share it
+#
+# @dummy-list: A dummy list
+#
+# Since: 3.1
Quoted 8 lines

qapi/sockets.json line 167

Quoted 3 lines
qapi/sockets.json +3 -0
+##
+{ 'struct': 'DummyStruct',
+  'data': { 'dummy-list': ['SocketAddress'] } }

We've had a couple of threads about this in the last couple of months; maybe it's time for a qapi generator patch where we add an optional 'gen-list':true marker to any struct that needs to have a list generated for C code even when no QMP command uses the list form.

Maybe.

As long as we need just a few such lists, stuffing them all into DummyForceArrays should do fine. There's no need for a fresh dummy type for each list.

Beyond a certain point, the DummyForceArrays hack may become bothersome enough to justify development and maintenance of a proper QAPI feature.

You mentioned "a couple of threads". Have they resulted in fresh dummy types? Or, to ask the same question differently, for which types do we force generation of list types?

#5 lore raw

PATCH v10 3/5 tests: Add basic migration precopy tcp test

In reply to Juan Quintela

Not sharing code from precopy/unix because we have to read back the tcp parameter.

---
 tests/migration-test.c | 108 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 103 insertions(+), 5 deletions(-)
tests/migration-test.c +103 -5
index d18e9b3709..4557704d17 100644
@@ -20,6 +20,9 @@
 #include "qemu/sockets.h"
 #include "chardev/char.h"
 #include "sysemu/sysemu.h"
+#include "qapi/qapi-visit-sockets.h"
+#include "qapi/qobject-input-visitor.h"
+#include "qapi/qobject-output-visitor.h"
 
 #include "migration/migration-test.h"
 
@@ -332,15 +335,67 @@ static void cleanup(const char *filename)
     g_free(path);
 }
 
+static char *SocketAddress_to_str(SocketAddress *addr)
+{
+    switch (addr->type) {
+    case SOCKET_ADDRESS_TYPE_INET:
+        return g_strdup_printf("tcp:%s:%s",
+                               addr->u.inet.host,
+                               addr->u.inet.port);
+        break;
+    case SOCKET_ADDRESS_TYPE_UNIX:
+        return g_strdup_printf("unix:%s",
+                               addr->u.q_unix.path);
+        break;
+    case SOCKET_ADDRESS_TYPE_FD:
+        return g_strdup_printf("fd:%s", addr->u.fd.str);
+        break;
+    default:
+        abort();
+    }
+}
+
+static char *migrate_get_socket_address(QTestState *who, const char *parameter)
+{
+    QDict *rsp;
+    char *result;
+    Error *local_err = NULL;
+    SocketAddressList *addrs;
+    Visitor *iv = NULL;
+    QObject *object;
+
+    rsp = migrate_query(who);
+    object = qdict_get(rsp, parameter);
+
+    iv = qobject_input_visitor_new(object);
+    visit_type_SocketAddressList(iv, NULL, &addrs, &local_err);
+
+    /* we are only using a single address */
+    result = g_strdup_printf("%s", SocketAddress_to_str(addrs->value));
+
+    qapi_free_SocketAddressList(addrs);
+    qobject_unref(rsp);
+    return result;
+}
+
+static long long migrate_get_parameter(QTestState *who, const char *parameter)
+{
+    QDict *rsp;
+    long long result;
+
+    rsp = wait_command(who, "{ 'execute': 'query-migrate-parameters' }");
+    result = qdict_get_int(rsp, parameter);
+    qobject_unref(rsp);
+    return result;
+}
+
 static void migrate_check_parameter(QTestState *who, const char *parameter,
                                     long long value)
 {
-    QDict *rsp_return;
+    long long result;
 
-    rsp_return = wait_command(who,
-                              "{ 'execute': 'query-migrate-parameters' }");
-    g_assert_cmpint(qdict_get_int(rsp_return, parameter), ==, value);
-    qobject_unref(rsp_return);
+    result = migrate_get_parameter(who, parameter);
+    g_assert_cmpint(result, ==, value);
 }
 
 static void migrate_set_parameter(QTestState *who, const char *parameter,
@@ -843,6 +898,48 @@ static void test_xbzrle_unix(void)
     g_free(uri);
 }
 
+static void test_precopy_tcp(void)
+{
+    char *uri;
+    QTestState *from, *to;
+
+    if (test_migrate_start(&from, &to, "tcp:127.0.0.1:0", false)) {
+        return;
+    }
+
+    /* We want to pick a speed slow enough that the test completes
+     * quickly, but that it doesn't complete precopy even on a slow
+     * machine, so also set the downtime.
+     */
+    /* 1 ms should make it not converge*/
+    migrate_set_parameter(from, "downtime-limit", 1);
+    /* 1GB/s */
+    migrate_set_parameter(from, "max-bandwidth", 1000000000);
+
+    /* Wait for the first serial output from the source */
+    wait_for_serial("src_serial");
+
+    uri = migrate_get_socket_address(to, "socket-address");
+
+    migrate(from, uri, "{}");
+
+    wait_for_migration_pass(from);
+
+    /* 300ms should converge */
+    migrate_set_parameter(from, "downtime-limit", 300);
+
+    if (!got_stop) {
+        qtest_qmp_eventwait(from, "STOP");
+    }
+    qtest_qmp_eventwait(to, "RESUME");
+
+    wait_for_serial("dest_serial");
+    wait_for_migration_complete(from);
+
+    test_migrate_end(from, to, true);
+    g_free(uri);
+}
+
 int main(int argc, char **argv)
 {
     char template[] = "/tmp/migration-test-XXXXXX";
@@ -894,6 +991,7 @@ int main(int argc, char **argv)
     qtest_add_func("/migration/deprecated", test_deprecated);
     qtest_add_func("/migration/bad_dest", test_baddest);
     qtest_add_func("/migration/precopy/unix", test_precopy_unix);
+    qtest_add_func("/migration/precopy/tcp", test_precopy_tcp);
     qtest_add_func("/migration/xbzrle/unix", test_xbzrle_unix);
 
     ret = g_test_run();
Signature · 1 line
2.19.1
#6 lore raw

PATCH v10 4/5 tests: Add migration multifd test

In reply to Juan Quintela

We set the x-multifd-page-count and x-multifd-channels.

---
 tests/migration-test.c | 50 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)
tests/migration-test.c +50 -0
index 4557704d17..010fe8b74d 100644
@@ -940,6 +940,55 @@ static void test_precopy_tcp(void)
     g_free(uri);
 }
 
+static void test_multifd_tcp(void)
+{
+    char *uri;
+    QTestState *from, *to;
+
+    if (test_migrate_start(&from, &to, "tcp:127.0.0.1:0", false)) {
+        return;
+    }
+
+    /* We want to pick a speed slow enough that the test completes
+     * quickly, but that it doesn't complete precopy even on a slow
+     * machine, so also set the downtime.
+     */
+    /* 1 ms should make it not converge*/
+    migrate_set_parameter(from, "downtime-limit", 1);
+    /* 1GB/s */
+    migrate_set_parameter(from, "max-bandwidth", 1000000000);
+
+    migrate_set_parameter(from, "x-multifd-channels", 4);
+    migrate_set_parameter(to, "x-multifd-channels", 4);
+
+    migrate_set_parameter(from, "x-multifd-page-count", 64);
+    migrate_set_parameter(to, "x-multifd-page-count", 64);
+
+    migrate_set_capability(from, "x-multifd", "true");
+    migrate_set_capability(to, "x-multifd", "true");
+    /* Wait for the first serial output from the source */
+    wait_for_serial("src_serial");
+
+    uri = migrate_get_socket_address(to, "socket-address");
+
+    migrate(from, uri, "{}");
+
+    wait_for_migration_pass(from);
+
+    /* 300ms it should converge */
+    migrate_set_parameter(from, "downtime-limit", 300);
+
+    if (!got_stop) {
+        qtest_qmp_eventwait(from, "STOP");
+    }
+    qtest_qmp_eventwait(to, "RESUME");
+
+    wait_for_serial("dest_serial");
+    wait_for_migration_complete(from);
+
+    test_migrate_end(from, to, true);
+}
+
 int main(int argc, char **argv)
 {
     char template[] = "/tmp/migration-test-XXXXXX";
@@ -993,6 +1042,7 @@ int main(int argc, char **argv)
     qtest_add_func("/migration/precopy/unix", test_precopy_unix);
     qtest_add_func("/migration/precopy/tcp", test_precopy_tcp);
     qtest_add_func("/migration/xbzrle/unix", test_xbzrle_unix);
+    qtest_add_func("/migration/multifd/tcp", test_multifd_tcp);
 
     ret = g_test_run();
 
Signature · 1 line
2.19.1
#7 lore raw

PATCH v10 5/5 tests: Add migration compress threads tests

In reply to Juan Quintela

Yeap, it is still not working. trying to learn how to debug threads for guests running from the testt hardness.

For some reason, compression is not working at the moment, test is disabled until I found why.

---
 tests/migration-test.c | 54 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)
tests/migration-test.c +54 -0
index 010fe8b74d..3841ac9c87 100644
@@ -989,6 +989,57 @@ static void test_multifd_tcp(void)
     test_migrate_end(from, to, true);
 }
 
+static void test_compress(const char *uri)
+{
+    QTestState *from, *to;
+
+    if (test_migrate_start(&from, &to, uri, false)) {
+        return;
+    }
+
+    /* We want to pick a speed slow enough that the test completes
+     * quickly, but that it doesn't complete precopy even on a slow
+     * machine, so also set the downtime.
+     */
+    /* 1 ms should make it not converge*/
+    migrate_set_parameter(from, "downtime-limit", 1);
+    /* 1GB/s */
+    migrate_set_parameter(from, "max-bandwidth", 1000000000);
+
+    migrate_set_parameter(from, "compress-threads", 4);
+    migrate_set_parameter(to, "decompress-threads", 3);
+
+    migrate_set_capability(from, "compress", "true");
+    migrate_set_capability(to, "compress", "true");
+    /* Wait for the first serial output from the source */
+    wait_for_serial("src_serial");
+
+    migrate(from, uri, "{}");
+
+    wait_for_migration_pass(from);
+
+    /* 300ms it should converge */
+    migrate_set_parameter(from, "downtime-limit", 300);
+
+    if (!got_stop) {
+        qtest_qmp_eventwait(from, "STOP");
+    }
+    qtest_qmp_eventwait(to, "RESUME");
+
+    wait_for_serial("dest_serial");
+    wait_for_migration_complete(from);
+
+    test_migrate_end(from, to, true);
+}
+
+static void test_compress_unix(void)
+{
+    char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs);
+
+    test_compress(uri);
+    g_free(uri);
+}
+
 int main(int argc, char **argv)
 {
     char template[] = "/tmp/migration-test-XXXXXX";
@@ -1043,6 +1094,9 @@ int main(int argc, char **argv)
     qtest_add_func("/migration/precopy/tcp", test_precopy_tcp);
     qtest_add_func("/migration/xbzrle/unix", test_xbzrle_unix);
     qtest_add_func("/migration/multifd/tcp", test_multifd_tcp);
+    if (0) {
+        qtest_add_func("/migration/compress/unix", test_compress_unix);
+    }
 
     ret = g_test_run();
 
Signature · 1 line
2.19.1
#8 lore raw
In reply to Juan Quintela
Quoted 3 lines · Juan Quintela

- Finish tl trasport test
I already knew that I hate certificates, but this is too much. Trying to understand how to use them.

I'll happily contribute TLS tests on top of your basic series here if you want. Just let me know...

If you prefer to try to do it yourself though, take a look at the test-io-channel-tls.c test which goes through the process of creating certificates and loading the QEMU TLS credential objets

Regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|